[PATCH] jme: Fix FIFO flush issue

[jme.git] / jme.h

diff --git a/jme.h b/jme.h
index 126f6fafb471b7ea166074ee8d88553b12fe7e50..4ee3e0b47c7ae60cc5780f3e2662adb65f1c4c7a 100644 (file)
--- a/jme.h
+++ b/jme.h
@@ -121,6 +121,14 @@ do {                                                                       \
 #define __USE_NDO_SET_RX_MODE__
 #endif
 
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,0)
+#define __USE_SKB_FRAG_API__
+#endif
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,3,0)
+#define __NEW_FIX_FEATURES_TYPE__
+#endif
+
 /*
  * Extra PCI Configuration space interface
  */
@@ -169,7 +177,6 @@ enum jme_spi_op_bits {
 };
 
 #define HALF_US 500    /* 500 ns */
-#define JMESPIIOCTL    SIOCDEVPRIVATE
 
 #define PCI_PRIV_PE1           0xE4
 
@@ -907,7 +914,7 @@ enum jme_rxcs_values {
        RXCS_RETRYCNT_60        = 0x00000F00,
 
        RXCS_DEFAULT            = RXCS_FIFOTHTP_128T |
-                                 RXCS_FIFOTHNP_128QW |
+                                 RXCS_FIFOTHNP_16QW |
                                  RXCS_DMAREQSZ_128B |
                                  RXCS_RETRYGAP_256ns |
                                  RXCS_RETRYCNT_32,
@@ -937,6 +944,25 @@ enum jme_rxmcs_bits {
                                  RXMCS_CHECKSUM,
 };
 
+/*     Extern PHY common register 2    */
+
+#define PHY_GAD_TEST_MODE_1                    0x00002000
+#define PHY_GAD_TEST_MODE_MSK                  0x0000E000
+#define JM_PHY_SPEC_REG_READ                   0x00004000
+#define JM_PHY_SPEC_REG_WRITE                  0x00008000
+#define PHY_CALIBRATION_DELAY                  20
+#define JM_PHY_SPEC_ADDR_REG                   0x1E
+#define JM_PHY_SPEC_DATA_REG                   0x1F
+
+#define JM_PHY_EXT_COMM_0_REG                  0x30
+#define JM_PHY_EXT_COMM_1_REG                  0x31
+#define JM_PHY_EXT_COMM_2_REG                  0x32
+#define JM_PHY_EXT_COMM_2_CALI_ENABLE          0x01
+#define JM_PHY_EXT_COMM_2_CALI_MODE_0          0x02
+#define JM_PHY_EXT_COMM_2_CALI_LATCH           0x10
+#define PCI_PRIV_SHARE_NICCTRL                 0xF5
+#define JME_FLAG_PHYEA_ENABLE                  0x2
+
 /*
  * Wakeup Frame setup interface registers
  */