From: David Woodhouse <David.Woodhouse@intel.com>
Date: Mon, 9 Nov 2009 22:15:15 +0000 (+0000)
Subject: intel-iommu: Check for 'DMAR at zero' BIOS error earlier.
X-Git-Tag: v2.6.32-rc8~35^2~2
X-Git-Url: http://bbs.cooldavid.org/git/?a=commitdiff_plain;h=86cf898e1d0fca245173980e3897580db38569a8;p=net-next-2.6.git

intel-iommu: Check for 'DMAR at zero' BIOS error earlier.

Chris Wright has some patches which let us fall back to swiotlb nicely
if IOMMU initialisation fails. But those are a bit much for 2.6.32.

Instead, let's shift the check for the biggest problem, the HP and Acer
BIOS bug which reports a DMAR at physical address zero. That one can
actually be checked much earlier -- before we even admit to having
detected an IOMMU in the first place. So the swiotlb init goes ahead as
we want.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
---

diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c
index 22b02c6df85..e5f8fc164fd 100644
--- a/drivers/pci/dmar.c
+++ b/drivers/pci/dmar.c
@@ -175,15 +175,6 @@ dmar_parse_one_drhd(struct acpi_dmar_header *header)
 	int ret = 0;
 
 	drhd = (struct acpi_dmar_hardware_unit *)header;
-	if (!drhd->address) {
-		/* Promote an attitude of violence to a BIOS engineer today */
-		WARN(1, "Your BIOS is broken; DMAR reported at address zero!\n"
-		     "BIOS vendor: %s; Ver: %s; Product Version: %s\n",
-		     dmi_get_system_info(DMI_BIOS_VENDOR),
-		     dmi_get_system_info(DMI_BIOS_VERSION),
-		     dmi_get_system_info(DMI_PRODUCT_VERSION));
-		return -ENODEV;
-	}
 	dmaru = kzalloc(sizeof(*dmaru), GFP_KERNEL);
 	if (!dmaru)
 		return -ENOMEM;
@@ -591,12 +582,50 @@ int __init dmar_table_init(void)
 	return 0;
 }
 
+int __init check_zero_address(void)
+{
+	struct acpi_table_dmar *dmar;
+	struct acpi_dmar_header *entry_header;
+	struct acpi_dmar_hardware_unit *drhd;
+
+	dmar = (struct acpi_table_dmar *)dmar_tbl;
+	entry_header = (struct acpi_dmar_header *)(dmar + 1);
+
+	while (((unsigned long)entry_header) <
+			(((unsigned long)dmar) + dmar_tbl->length)) {
+		/* Avoid looping forever on bad ACPI tables */
+		if (entry_header->length == 0) {
+			printk(KERN_WARNING PREFIX
+				"Invalid 0-length structure\n");
+			return 0;
+		}
+
+		if (entry_header->type == ACPI_DMAR_TYPE_HARDWARE_UNIT) {
+			drhd = (void *)entry_header;
+			if (!drhd->address) {
+				/* Promote an attitude of violence to a BIOS engineer today */
+				WARN(1, "Your BIOS is broken; DMAR reported at address zero!\n"
+				     "BIOS vendor: %s; Ver: %s; Product Version: %s\n",
+				     dmi_get_system_info(DMI_BIOS_VENDOR),
+				     dmi_get_system_info(DMI_BIOS_VERSION),
+				     dmi_get_system_info(DMI_PRODUCT_VERSION));
+				return 0;
+			}
+			break;
+		}
+
+		entry_header = ((void *)entry_header + entry_header->length);
+	}
+	return 1;
+}
+
 void __init detect_intel_iommu(void)
 {
 	int ret;
 
 	ret = dmar_table_detect();
-
+	if (ret)
+		ret = check_zero_address();
 	{
 #ifdef CONFIG_INTR_REMAP
 		struct acpi_table_dmar *dmar;