--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.33-rc6
+# Thu Feb 4 15:42:56 2010
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_RD_LZO is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2PLUS=y
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+CONFIG_MACH_DEVKIT8000=y
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyS2,115200n8 root=/dev/nfs nfsroot=192.168.1.1:home/nfsroot/current,home/nfsroot/current ip=dhcp rw noinitrd root delay=3"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=y
+
+#
+# IrDA protocols
+#
+# CONFIG_IRLAN is not set
+# CONFIG_IRCOMM is not set
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+# CONFIG_KINGSUN_DONGLE is not set
+# CONFIG_KSDAZZLE_DONGLE is not set
+# CONFIG_KS959_DONGLE is not set
+
+#
+# FIR device drivers
+#
+# CONFIG_USB_IRDA is not set
+# CONFIG_SIGMATEL_FIR is not set
+# CONFIG_MCS_FIR is not set
+CONFIG_BT=y
+# CONFIG_BT_L2CAP is not set
+# CONFIG_BT_SCO is not set
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+# CONFIG_BT_HCIUART is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+CONFIG_MTD_ROM=y
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=40960
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_MATRIX=y
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_RAW=y
+# CONFIG_SERIO_ALTERA_PS2 is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+CONFIG_RAW_DRIVER=y
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+# CONFIG_GPIO_ADP5588 is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_POWER=y
+CONFIG_TWL4030_CODEC=y
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_BOTH_ENDIAN=y
+# CONFIG_FB_BIG_ENDIAN is not set
+# CONFIG_FB_LITTLE_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_FB_OMAP_BOOTLOADER_INIT=y
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=0
+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
+# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+# CONFIG_OMAP2_DSS_SDI is not set
+# CONFIG_OMAP2_DSS_DSI is not set
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC=y
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
+CONFIG_PANEL_INNOLUX_AT070TN83=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+CONFIG_HIDRAW=y
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+CONFIG_USB_HIDDEV=y
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+# CONFIG_HID_DRAGONRISE is not set
+CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
+CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=y
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=y
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_AUDIO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_ETH_EEM=y
+CONFIG_USB_GADGETFS=m
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=m
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_REGULATOR is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc6
-# Fri Nov 13 12:01:17 2009
+# Linux kernel version: 2.6.33-rc3
+# Thu Jan 7 16:14:55 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=32
# CONFIG_RCU_FANOUT_EXACT is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
#
# TI OMAP Implementations
#
# OMAP Feature Selections
#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
-CONFIG_OMAP_MUX=y
-CONFIG_OMAP_MUX_DEBUG=y
-CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_MUX is not set
CONFIG_OMAP_MCBSP=y
# CONFIG_OMAP_MBOX_FWK is not set
# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_PM_NOOP=y
CONFIG_ARCH_OMAP34XX=y
CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CBB=y
#
# OMAP Board Type
# CONFIG_MACH_OMAP3EVM is not set
# CONFIG_MACH_OMAP3517EVM is not set
# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
# CONFIG_MACH_OMAP_3430SDP is not set
# CONFIG_MACH_NOKIA_RX51 is not set
# CONFIG_MACH_OMAP_ZOOM2 is not set
-# CONFIG_MACH_CM_T35 is not set
# CONFIG_MACH_OMAP_ZOOM3 is not set
-# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_MACH_CM_T35 is not set
CONFIG_MACH_IGEP0020=y
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
#
# Processor Type
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_LEDS is not set
#
# Bluetooth device drivers
#
-CONFIG_BT_HCIBTUSB=m
+# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
-CONFIG_CFG80211=m
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_CFG80211=y
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
-CONFIG_CFG80211_DEFAULT_PS_VALUE=1
# CONFIG_WIRELESS_OLD_REGULATORY is not set
-CONFIG_WIRELESS_EXT=y
+CONFIG_CFG80211_WEXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=m
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
+CONFIG_LIB80211=y
# CONFIG_LIB80211_DEBUG is not set
-CONFIG_MAC80211=m
+CONFIG_MAC80211=y
# CONFIG_MAC80211_RC_PID is not set
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+CONFIG_MTD_ONENAND_2X_PROGRAM=y
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MG_DISK is not set
# CONFIG_MISC_DEVICES is not set
-CONFIG_EEPROM_93CX6=m
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
CONFIG_WLAN=y
-# CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_SDIO=m
-# CONFIG_LIBERTAS_SPI is not set
-# CONFIG_LIBERTAS_DEBUG is not set
# CONFIG_LIBERTAS_THINFIRM is not set
-CONFIG_AT76C50X_USB=m
-CONFIG_USB_ZD1201=m
-CONFIG_USB_NET_RNDIS_WLAN=m
-CONFIG_RTL8187=m
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
# CONFIG_MAC80211_HWSIM is not set
-CONFIG_P54_COMMON=m
-CONFIG_P54_USB=m
-CONFIG_P54_SPI=m
-CONFIG_ATH_COMMON=m
-CONFIG_AR9170_USB=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_B43=m
-# CONFIG_B43_SDIO is not set
-# CONFIG_B43_PHY_LP is not set
-CONFIG_B43_HWRNG=y
-# CONFIG_B43_DEBUG is not set
-CONFIG_B43LEGACY=m
-CONFIG_B43LEGACY_HWRNG=y
-# CONFIG_B43LEGACY_DEBUG is not set
-CONFIG_B43LEGACY_DMA=y
-CONFIG_B43LEGACY_PIO=y
-CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
-# CONFIG_B43LEGACY_DMA_MODE is not set
-# CONFIG_B43LEGACY_PIO_MODE is not set
-CONFIG_ZD1211RW=m
-# CONFIG_ZD1211RW_DEBUG is not set
-CONFIG_RT2X00=m
-CONFIG_RT2500USB=m
-CONFIG_RT73USB=m
-CONFIG_RT2800USB=m
-CONFIG_RT2X00_LIB_USB=m
-CONFIG_RT2X00_LIB=m
-CONFIG_RT2X00_LIB_HT=y
-CONFIG_RT2X00_LIB_FIRMWARE=y
-CONFIG_RT2X00_LIB_CRYPTO=y
-# CONFIG_RT2X00_DEBUG is not set
-CONFIG_WL12XX=m
-# CONFIG_WL1251 is not set
-# CONFIG_WL1271 is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
# CONFIG_IWM is not set
+CONFIG_LIBERTAS=y
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_ZD1211RW is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_AX8817X=m
-CONFIG_USB_NET_CDCETHER=m
-CONFIG_USB_NET_CDC_EEM=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_SMSC95XX=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-# CONFIG_USB_ALI_M5632 is not set
-# CONFIG_USB_AN2720 is not set
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_KC2190 is not set
-CONFIG_USB_NET_ZAURUS=m
-# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
# Miscellaneous I2C Chip support
#
-# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_SPI_BITBANG is not set
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# Multifunction device drivers
#
-# CONFIG_MFD_CORE is not set
+CONFIG_MFD_CORE=y
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_TPS65010 is not set
CONFIG_TWL4030_CORE=y
# CONFIG_TWL4030_POWER is not set
+CONFIG_TWL4030_CODEC=y
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
CONFIG_REGULATOR_TWL4030=y
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_TPS65023 is not set
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=14
+# CONFIG_OMAP2_DSS_DEBUG_SUPPORT is not set
+# CONFIG_OMAP2_DSS_RFBI is not set
+# CONFIG_OMAP2_DSS_VENC is not set
+# CONFIG_OMAP2_DSS_SDI is not set
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_OMAP2_DSS_USE_DSI_PLL=y
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_FB_OMAP2=y
+# CONFIG_FB_OMAP2_DEBUG_SUPPORT is not set
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC=y
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
+# CONFIG_PANEL_TAAL is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
-# CONFIG_DISPLAY_SUPPORT is not set
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
#
# Console display driver support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DRAGONRISE is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_KYE is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID_TWINHAN is not set
-# CONFIG_HID_KENSINGTON is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_NTRIG is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
-# CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_WACOM is not set
-# CONFIG_HID_ZEROPLUS is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+CONFIG_SND_OMAP_SOC_IGEP0020=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
+# CONFIG_SOUND_PRIME is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_HID=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
-# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=m
+# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
-# CONFIG_USB_OHCI_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HWA_HCD is not set
-CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_SOC=y
-
-#
-# OMAP 343x high speed USB support
-#
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
-# CONFIG_MUSB_PIO_ONLY is not set
-CONFIG_USB_INVENTRA_DMA=y
-# CONFIG_USB_TI_CPPI_DMA is not set
-# CONFIG_USB_MUSB_DEBUG is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# also be needed; see USB_STORAGE Help for more info
#
-CONFIG_USB_STORAGE=m
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
#
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_VBUS_DRAW=2
-CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_R8A66597 is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LANGWELL is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
-CONFIG_USB_ZERO=m
-# CONFIG_USB_AUDIO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_ISP1301_OMAP is not set
-CONFIG_TWL4030_USB=y
+# CONFIG_USB_ULPI is not set
+# CONFIG_TWL4030_USB is not set
# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
-# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_DEBUG=y
# CONFIG_MMC_UNSAFE_RESUME is not set
#
#
# MMC/SD/SDIO Host Controller Drivers
#
-# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_SDHCI=y
+# CONFIG_MMC_SDHCI_PLTFM is not set
# CONFIG_MMC_OMAP is not set
CONFIG_MMC_OMAP_HS=y
# CONFIG_MMC_AT91 is not set
#
# CONFIG_STAGING is not set
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
#
# File systems
#
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_DEBUG_ERRORS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
+# CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_OC_ETM is not set
#
# Security options
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
#
# OMAP Feature Selections
#
+CONFIG_OMAP_SMARTREFLEX=y
+# CONFIG_OMAP_SMARTREFLEX_TESTING is not set
# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
CONFIG_OMAP_RESET_CLOCKS=y
# Power management options
#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
+CONFIG_PM_DEBUG=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Fri Dec 5 11:54:09 2008
+# Linux kernel version: 2.6.33-rc6
+# Sat Feb 6 20:25:41 2010
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
+CONFIG_HAVE_PROC_CPU=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_CPUFREQ=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
#
# General setup
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED=y is not set
-# CONFIG_SYSFS_DEPRECATED_V2=y is not set
-
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+# CONFIG_RD_LZO is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
+
+#
+# Kernel Performance Events And Counters
+#
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_SLOW_WORK=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
# CONFIG_FREEZER is not set
#
# System Type
#
+CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
# CONFIG_ARCH_LOKI is not set
# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
# CONFIG_ARCH_DAVINCI is not set
CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
#
# TI OMAP Implementations
#
CONFIG_ARCH_OMAP_OTG=y
# CONFIG_ARCH_OMAP1 is not set
+CONFIG_ARCH_OMAP2PLUS=y
# CONFIG_ARCH_OMAP2 is not set
CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
#
# OMAP Feature Selections
#
-# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
-# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
# CONFIG_OMAP_RESET_CLOCKS is not set
# CONFIG_OMAP_MUX is not set
CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
# CONFIG_OMAP_MPU_TIMER is not set
CONFIG_OMAP_32K_TIMER=y
CONFIG_OMAP_32K_TIMER_HZ=128
CONFIG_OMAP_DM_TIMER=y
-# CONFIG_OMAP_LL_DEBUG_UART1 is not set
-# CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
-CONFIG_ARCH_OMAP34XX=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
CONFIG_ARCH_OMAP3430=y
+CONFIG_OMAP_PACKAGE_CBB=y
#
# OMAP Board Type
# CONFIG_MACH_OMAP3_BEAGLE is not set
# CONFIG_MACH_OMAP_LDP is not set
# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3517EVM is not set
CONFIG_MACH_OMAP3_PANDORA=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_OMAP3_EMU is not set
+# CONFIG_OMAP3_SDRC_AC_TIMING is not set
#
# Processor Type
CONFIG_CPU_V7=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_CPU_HAS_PMU=y
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
#
# Boot options
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
# CONFIG_NET_ETHERNET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
#
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
#
# Input device support
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DYNAPRO is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_TWL4030_PWRBUTTON=y
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
#
# Hardware I/O ports
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_OMAP=y
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_ISP1301_OMAP is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
CONFIG_SPI_OMAP24XX=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
CONFIG_ARCH_REQUIRE_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
CONFIG_GPIO_TWL4030=y
+# CONFIG_GPIO_ADP5588 is not set
#
# PCI GPIO expanders:
#
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_ALS is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Multifunction device drivers
#
-# CONFIG_MFD_CORE is not set
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
+# CONFIG_TPS65010 is not set
CONFIG_TWL4030_CORE=y
+CONFIG_TWL4030_POWER=y
+CONFIG_TWL4030_CODEC=y
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_T7L66XB is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_MFD_TC6393XB is not set
# CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MFD_WM8994 is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_AB4500_CORE is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_TMIO is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=0
+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
+# CONFIG_OMAP2_DSS_COLLECT_IRQ_STATS is not set
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+# CONFIG_OMAP2_DSS_SDI is not set
+# CONFIG_OMAP2_DSS_DSI is not set
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+# CONFIG_PANEL_GENERIC is not set
+# CONFIG_PANEL_SHARP_LS037V7DW01 is not set
+# CONFIG_PANEL_SHARP_LQ043T1DG01 is not set
+# CONFIG_PANEL_TOPPOLY_TDO35S is not set
+CONFIG_PANEL_TPO_TD043MTEA1=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
#
# Display device support
#
# CONFIG_VGA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_UA101 is not set
+# CONFIG_SND_USB_CAIAQ is not set
CONFIG_SND_SOC=y
CONFIG_SND_OMAP_SOC=y
CONFIG_SND_OMAP_SOC_MCBSP=y
CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
CONFIG_SND_SOC_TWL4030=y
-
+# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
#
# Special HID drivers
#
-# CONFIG_HID_COMPAT is not set
+# CONFIG_HID_3M_PCT is not set
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_BRIGHT is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DELL is not set
+# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_QUANTA is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
+# CONFIG_HID_STANTUM is not set
# CONFIG_HID_SUNPLUS is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
+# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
#
# OMAP 343x high speed USB support
#
-CONFIG_USB_MUSB_HOST=y
-# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_HOST is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
# CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
# CONFIG_MUSB_PIO_ONLY is not set
CONFIG_USB_INVENTRA_DMA=y
# CONFIG_USB_TI_CPPI_DMA is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
# CONFIG_USB_GADGET_LH7A40X is not set
-CONFIG_USB_GADGET_OMAP=y
-CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
CONFIG_USB_ETH=y
CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_MASS_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
+# CONFIG_USB_G_MULTI is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_USB_ULPI is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# CONFIG_MMC_SDHCI is not set
# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_REGULATOR is not set
+# CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
+
+#
+# LED Triggers
+#
CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
CONFIG_RTC_DRV_TWL4030=y
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_TWL4030=y
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
+CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
+CONFIG_CIFS=y
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
#
# Partition Types
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_USER is not set
# CONFIG_DEBUG_ERRORS is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
#
# Security options
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HASH2=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
#
# Block modes
#
-CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=y
-CONFIG_PLIST=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-# added by hand for now
-CONFIG_KEYBOARD_TWL4030=y
-CONFIG_USB_OTG_UTILS=y
-CONFIG_TWL4030_USB=y
-CONFIG_MMC_OMAP_HS=y
-
+CONFIG_NLATTR=y
+# CONFIG_SHM_SIGNAL is not set
+# CONFIG_IOQ is not set
depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
+config MACH_DEVKIT8000
+ bool "DEVKIT8000 board"
+ depends on ARCH_OMAP3
+
config MACH_OMAP_LDP
bool "OMAP3 LDP board"
depends on ARCH_OMAP3
select OMAP_MUX
config MACH_IGEP0020
- bool "IGEP0020"
+ bool "IGEP v2 board"
depends on ARCH_OMAP3
select OMAP_PACKAGE_CBB
obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o
obj-$(CONFIG_MACH_OMAP3_BEAGLE) += board-omap3beagle.o \
hsmmc.o
+obj-$(CONFIG_MACH_DEVKIT8000) += board-devkit8000.o \
+ hsmmc.o
obj-$(CONFIG_MACH_OMAP_LDP) += board-ldp.o \
hsmmc.o
obj-$(CONFIG_MACH_OVERO) += board-overo.o \
{} /* Terminator */
};
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init omap_2430sdp_init(void)
{
int ret;
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
omap_serial_init();
omap2_hsmmc_init(mmc);
- usb_musb_init();
+ usb_musb_init(&musb_board_data);
board_smc91x_init();
/* Turn off secondary LCD backlight */
#include "mux.h"
#include "sdram-qimonda-hyb18m512160af-6.h"
#include "hsmmc.h"
+#include "pm.h"
#define CONFIG_DISABLE_HFCLK 1
#define TWL4030_MSECURE_GPIO 22
+/* FIXME: These values need to be updated based on more profiling on 3430sdp*/
+static struct cpuidle_params omap3_cpuidle_params_table[] = {
+ /* C1 */
+ {1, 2, 2, 5},
+ /* C2 */
+ {1, 10, 10, 30},
+ /* C3 */
+ {1, 50, 50, 300},
+ /* C4 */
+ {1, 1500, 1800, 4000},
+ /* C5 */
+ {1, 2500, 7500, 12000},
+ /* C6 */
+ {1, 3000, 8500, 15000},
+ /* C7 */
+ {1, 10000, 30000, 300000},
+};
+
static int board_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
{
omap_board_config = sdp3430_config;
omap_board_config_size = ARRAY_SIZE(sdp3430_config);
+ omap3_pm_init_cpuidle(omap3_cpuidle_params_table);
omap2_init_common_hw(hyb18m512160af6_sdrc_params, NULL);
omap_init_irq();
omap_gpio_init();
},
};
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init omap_3430sdp_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
ARRAY_SIZE(sdp3430_spi_board_info));
ads7846_dev_init();
omap_serial_init();
- usb_musb_init();
+ usb_musb_init(&musb_board_data);
board_smc91x_init();
sdp_flash_init(sdp_flash_partitions);
sdp3430_display_init();
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/usb/otg.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <plat/common.h>
#include <plat/control.h>
#include <plat/timer-gp.h>
+#include <plat/usb.h>
#include <asm/hardware/gic.h>
static struct platform_device sdp4430_lcd_device = {
omap_gpio_init();
}
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_UTMI,
+ .mode = MUSB_PERIPHERAL,
+ .power = 100,
+};
static void __init omap_4430sdp_init(void)
{
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
omap_serial_init();
+ /* OMAP4 SDP uses internal transceiver so register nop transceiver */
+ usb_nop_xceiv_register();
+ /* FIXME: allow multi-omap to boot until musb is updated for omap4 */
+ if (!cpu_is_omap44xx())
+ usb_musb_init(&musb_board_data);
}
static void __init omap_4430sdp_map_io(void)
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
+#include <linux/i2c/pca953x.h>
#include <mach/hardware.h>
#include <mach/am35xx.h>
#define LCD_PANEL_BKLIGHT_PWR 182
#define LCD_PANEL_PWM 181
+static struct i2c_board_info __initdata am3517evm_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("s35390a", 0x30),
+ .type = "s35390a",
+ },
+};
+
+/*
+ * RTC - S35390A
+ */
+#define GPIO_RTCS35390A_IRQ 55
+
+static void __init am3517_evm_rtc_init(void)
+{
+ int r;
+
+ omap_mux_init_gpio(GPIO_RTCS35390A_IRQ, OMAP_PIN_INPUT_PULLUP);
+ r = gpio_request(GPIO_RTCS35390A_IRQ, "rtcs35390a-irq");
+ if (r < 0) {
+ printk(KERN_WARNING "failed to request GPIO#%d\n",
+ GPIO_RTCS35390A_IRQ);
+ return;
+ }
+ r = gpio_direction_input(GPIO_RTCS35390A_IRQ);
+ if (r < 0) {
+ printk(KERN_WARNING "GPIO#%d cannot be configured as input\n",
+ GPIO_RTCS35390A_IRQ);
+ gpio_free(GPIO_RTCS35390A_IRQ);
+ return;
+ }
+ am3517evm_i2c_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ);
+}
+
+/*
+ * I2C GPIO Expander - TCA6416
+ */
+
+/* Mounted on Base-Board */
+static struct pca953x_platform_data am3517evm_gpio_expander_info_0 = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+};
+static struct i2c_board_info __initdata am3517evm_tca6516_info_0[] = {
+ {
+ I2C_BOARD_INFO("tca6416", 0x21),
+ .platform_data = &am3517evm_gpio_expander_info_0,
+ },
+};
+
+/* Mounted on UI Card */
+static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_1 = {
+ .gpio_base = OMAP_MAX_GPIO_LINES + 16,
+};
+static struct pca953x_platform_data am3517evm_ui_gpio_expander_info_2 = {
+ .gpio_base = OMAP_MAX_GPIO_LINES + 32,
+};
+static struct i2c_board_info __initdata am3517evm_ui_tca6516_info[] = {
+ {
+ I2C_BOARD_INFO("tca6416", 0x20),
+ .platform_data = &am3517evm_ui_gpio_expander_info_1,
+ },
+ {
+ I2C_BOARD_INFO("tca6416", 0x21),
+ .platform_data = &am3517evm_ui_gpio_expander_info_2,
+ },
+};
+
+static int __init am3517_evm_i2c_init(void)
+{
+ omap_register_i2c_bus(1, 400, NULL, 0);
+ omap_register_i2c_bus(2, 400, am3517evm_tca6516_info_0,
+ ARRAY_SIZE(am3517evm_tca6516_info_0));
+ omap_register_i2c_bus(3, 400, am3517evm_ui_tca6516_info,
+ ARRAY_SIZE(am3517evm_ui_tca6516_info));
+
+ return 0;
+}
+
static int lcd_enabled;
static int dvi_enabled;
static void __init am3517_evm_init(void)
{
+ am3517_evm_i2c_init();
+
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
platform_add_devices(am3517_evm_devices,
ARRAY_SIZE(am3517_evm_devices));
usb_ehci_init(&ehci_pdata);
/* DSS */
am3517_evm_display_init();
+
+ /* RTC - S35390A */
+ am3517_evm_rtc_init();
+
+ i2c_register_board_info(1, am3517evm_i2c_boardinfo,
+ ARRAY_SIZE(am3517evm_i2c_boardinfo));
}
static void __init am3517_evm_map_io(void)
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init cm_t35_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
cm_t35_init_led();
cm_t35_init_display();
- usb_musb_init();
+ usb_musb_init(&musb_board_data);
}
MACHINE_START(CM_T35, "Compulab CM-T35")
--- /dev/null
+/*
+ * board-devkit8000.c - TimLL Devkit8000
+ *
+ * Copyright (C) 2009 Kim Botherway
+ * Copyright (C) 2010 Thomas Weber
+ *
+ * Modified from mach-omap2/board-omap3beagle.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
+#include <linux/regulator/machine.h>
+#include <linux/i2c/twl.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/nand.h>
+#include <plat/usb.h>
+#include <plat/timer-gp.h>
+#include <plat/display.h>
+
+#include <plat/mcspi.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/usb/otg.h>
+#include <linux/dm9000.h>
+#include <linux/interrupt.h>
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+
+#include "mux.h"
+#include "hsmmc.h"
+
+#define GPMC_CS0_BASE 0x60
+#define GPMC_CS_SIZE 0x30
+
+#define NAND_BLOCK_SIZE SZ_128K
+
+#define OMAP_DM9000_GPIO_IRQ 25
+#define OMAP3_DEVKIT_TS_GPIO 27
+
+static struct mtd_partition devkit8000_nand_partitions[] = {
+ /* All the partition sizes are listed in terms of NAND block size */
+ {
+ .name = "X-Loader",
+ .offset = 0,
+ .size = 4 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "U-Boot",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
+ .size = 15 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ {
+ .name = "U-Boot Env",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x260000 */
+ .size = 1 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
+ .size = 32 * NAND_BLOCK_SIZE,
+ },
+ {
+ .name = "File System",
+ .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct omap_nand_platform_data devkit8000_nand_data = {
+ .options = NAND_BUSWIDTH_16,
+ .parts = devkit8000_nand_partitions,
+ .nr_parts = ARRAY_SIZE(devkit8000_nand_partitions),
+ .dma_channel = -1, /* disable DMA in OMAP NAND driver */
+};
+
+static struct resource devkit8000_nand_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device devkit8000_nand_device = {
+ .name = "omap2-nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &devkit8000_nand_data,
+ },
+ .num_resources = 1,
+ .resource = &devkit8000_nand_resource,
+};
+
+static struct omap2_hsmmc_info mmc[] = {
+ {
+ .mmc = 1,
+ .wires = 8,
+ .gpio_wp = 29,
+ },
+ {} /* Terminator */
+};
+static struct omap_board_config_kernel devkit8000_config[] __initdata = {
+};
+
+static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+ twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1);
+ twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0);
+
+ return 0;
+}
+
+static void devkit8000_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+}
+static int devkit8000_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+ return 0;
+}
+
+static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+}
+
+static int devkit8000_panel_enable_tv(struct omap_dss_device *dssdev)
+{
+
+ return 0;
+}
+
+static void devkit8000_panel_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+
+static struct regulator_consumer_supply devkit8000_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static struct regulator_consumer_supply devkit8000_vsim_supply = {
+ .supply = "vmmc_aux",
+};
+
+
+static struct omap_dss_device devkit8000_lcd_device = {
+ .name = "lcd",
+ .driver_name = "innolux_at_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 24,
+ .platform_enable = devkit8000_panel_enable_lcd,
+ .platform_disable = devkit8000_panel_disable_lcd,
+};
+static struct omap_dss_device devkit8000_dvi_device = {
+ .name = "dvi",
+ .driver_name = "generic_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 24,
+ .platform_enable = devkit8000_panel_enable_dvi,
+ .platform_disable = devkit8000_panel_disable_dvi,
+};
+
+static struct omap_dss_device devkit8000_tv_device = {
+ .name = "tv",
+ .driver_name = "venc",
+ .type = OMAP_DISPLAY_TYPE_VENC,
+ .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+ .platform_enable = devkit8000_panel_enable_tv,
+ .platform_disable = devkit8000_panel_disable_tv,
+};
+
+
+static struct omap_dss_device *devkit8000_dss_devices[] = {
+ &devkit8000_lcd_device,
+ &devkit8000_dvi_device,
+ &devkit8000_tv_device,
+};
+
+static struct omap_dss_board_info devkit8000_dss_data = {
+ .num_devices = ARRAY_SIZE(devkit8000_dss_devices),
+ .devices = devkit8000_dss_devices,
+ .default_device = &devkit8000_lcd_device,
+};
+
+static struct platform_device devkit8000_dss_device = {
+ .name = "omapdss",
+ .id = -1,
+ .dev = {
+ .platform_data = &devkit8000_dss_data,
+ },
+};
+
+static struct regulator_consumer_supply devkit8000_vdda_dac_supply = {
+ .supply = "vdda_dac",
+ .dev = &devkit8000_dss_device.dev,
+};
+
+static int board_keymap[] = {
+ KEY(0, 0, KEY_1),
+ KEY(1, 0, KEY_2),
+ KEY(2, 0, KEY_3),
+ KEY(0, 1, KEY_4),
+ KEY(1, 1, KEY_5),
+ KEY(2, 1, KEY_6),
+ KEY(3, 1, KEY_F5),
+ KEY(0, 2, KEY_7),
+ KEY(1, 2, KEY_8),
+ KEY(2, 2, KEY_9),
+ KEY(3, 2, KEY_F6),
+ KEY(0, 3, KEY_F7),
+ KEY(1, 3, KEY_0),
+ KEY(2, 3, KEY_F8),
+ PERSISTENT_KEY(4, 5),
+ KEY(4, 4, KEY_VOLUMEUP),
+ KEY(5, 5, KEY_VOLUMEDOWN),
+ 0
+};
+
+static struct matrix_keymap_data board_map_data = {
+ .keymap = board_keymap,
+ .keymap_size = ARRAY_SIZE(board_keymap),
+};
+
+static struct twl4030_keypad_data devkit8000_kp_data = {
+ .keymap_data = &board_map_data,
+ .rows = 6,
+ .cols = 6,
+ .rep = 1,
+};
+
+static struct gpio_led gpio_leds[];
+
+static int devkit8000_twl_gpio_setup(struct device *dev,
+ unsigned gpio, unsigned ngpio)
+{
+ omap_mux_init_gpio(29, OMAP_PIN_INPUT);
+ /* gpio + 0 is "mmc0_cd" (input/IRQ) */
+ mmc[0].gpio_cd = gpio + 0;
+ omap2_hsmmc_init(mmc);
+
+ /* link regulators to MMC adapters */
+ devkit8000_vmmc1_supply.dev = mmc[0].dev;
+ devkit8000_vsim_supply.dev = mmc[0].dev;
+
+ /* REVISIT: need ehci-omap hooks for external VBUS
+ * power switch and overcurrent detect
+ */
+
+ gpio_request(gpio + 1, "EHCI_nOC");
+ gpio_direction_input(gpio + 1);
+
+ /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
+ gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
+ gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1);
+
+ /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
+ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+ return 0;
+}
+
+static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
+ .use_leds = true,
+ .pullups = BIT(1),
+ .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
+ | BIT(15) | BIT(16) | BIT(17),
+ .setup = devkit8000_twl_gpio_setup,
+};
+
+static struct regulator_consumer_supply devkit8000_vpll2_supplies[] = {
+ {
+ .supply = "vdvi",
+ .dev = &devkit8000_lcd_device.dev,
+ },
+ {
+ .supply = "vdss_dsi",
+ .dev = &devkit8000_dss_device.dev,
+ }
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data devkit8000_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &devkit8000_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data devkit8000_vsim = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &devkit8000_vsim_supply,
+};
+
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data devkit8000_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &devkit8000_vdda_dac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data devkit8000_vpll2 = {
+ .constraints = {
+ .name = "VDVI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(devkit8000_vpll2_supplies),
+ .consumer_supplies = devkit8000_vpll2_supplies,
+};
+
+static struct twl4030_usb_data devkit8000_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
+static struct twl4030_codec_audio_data devkit8000_audio_data = {
+ .audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data devkit8000_codec_data = {
+ .audio_mclk = 26000000,
+ .audio = &devkit8000_audio_data,
+};
+
+static struct twl4030_platform_data devkit8000_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .usb = &devkit8000_usb_data,
+ .gpio = &devkit8000_gpio_data,
+ .codec = &devkit8000_codec_data,
+ .vmmc1 = &devkit8000_vmmc1,
+ .vsim = &devkit8000_vsim,
+ .vdac = &devkit8000_vdac,
+ .vpll2 = &devkit8000_vpll2,
+ .keypad = &devkit8000_kp_data,
+};
+
+static struct i2c_board_info __initdata devkit8000_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &devkit8000_twldata,
+ },
+};
+
+static int __init devkit8000_i2c_init(void)
+{
+ omap_register_i2c_bus(1, 2600, devkit8000_i2c_boardinfo,
+ ARRAY_SIZE(devkit8000_i2c_boardinfo));
+ /* Bus 3 is attached to the DVI port where devices like the pico DLP
+ * projector don't work reliably with 400kHz */
+ omap_register_i2c_bus(3, 400, NULL, 0);
+ return 0;
+}
+
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "led1",
+ .default_trigger = "heartbeat",
+ .gpio = 186,
+ .active_low = true,
+ },
+ {
+ .name = "led2",
+ .default_trigger = "mmc0",
+ .gpio = 163,
+ .active_low = true,
+ },
+ {
+ .name = "ledB",
+ .default_trigger = "none",
+ .gpio = 153,
+ .active_low = true,
+ },
+ {
+ .name = "led3",
+ .default_trigger = "none",
+ .gpio = 164,
+ .active_low = true,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ },
+};
+
+static struct gpio_keys_button gpio_buttons[] = {
+ {
+ .code = BTN_EXTRA,
+ .gpio = 26,
+ .desc = "user",
+ .wakeup = 1,
+ },
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+ .buttons = gpio_buttons,
+ .nbuttons = ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device keys_gpio = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_key_info,
+ },
+};
+
+
+static void __init devkit8000_init_irq(void)
+{
+ omap_board_config = devkit8000_config;
+ omap_board_config_size = ARRAY_SIZE(devkit8000_config);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+ mt46h32m32lf6_sdrc_params);
+ omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+ omap2_gp_clockevent_set_gptimer(12);
+#endif
+ omap_gpio_init();
+}
+
+static void __init devkit8000_ads7846_init(void)
+{
+ int gpio = OMAP3_DEVKIT_TS_GPIO;
+ int ret;
+
+ ret = gpio_request(gpio, "ads7846_pen_down");
+ if (ret < 0) {
+ printk(KERN_ERR "Failed to request GPIO %d for "
+ "ads7846 pen down IRQ\n", gpio);
+ return;
+ }
+
+ gpio_direction_input(gpio);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+ return !gpio_get_value(OMAP3_DEVKIT_TS_GPIO);
+}
+
+static struct ads7846_platform_data ads7846_config = {
+ .x_max = 0x0fff,
+ .y_max = 0x0fff,
+ .x_plate_ohms = 180,
+ .pressure_max = 255,
+ .debounce_max = 10,
+ .debounce_tol = 5,
+ .debounce_rep = 1,
+ .get_pendown_state = ads7846_get_pendown_state,
+ .keep_vref_on = 1,
+ .settle_delay_usecs = 150,
+};
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1, /* 0: slave, 1: master */
+};
+
+static struct spi_board_info devkit8000_spi_board_info[] __initdata = {
+ {
+ .modalias = "ads7846",
+ .bus_num = 2,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &ads7846_mcspi_config,
+ .irq = OMAP_GPIO_IRQ(OMAP3_DEVKIT_TS_GPIO),
+ .platform_data = &ads7846_config,
+ }
+};
+
+#define OMAP_DM9000_BASE 0x2c000000
+
+static struct resource omap_dm9000_resources[] = {
+ [0] = {
+ .start = OMAP_DM9000_BASE,
+ .end = (OMAP_DM9000_BASE + 0x4 - 1),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = (OMAP_DM9000_BASE + 0x400),
+ .end = (OMAP_DM9000_BASE + 0x400 + 0x4 - 1),
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = OMAP_GPIO_IRQ(OMAP_DM9000_GPIO_IRQ),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+ },
+};
+
+static struct dm9000_plat_data omap_dm9000_platdata = {
+ .flags = DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device omap_dm9000_dev = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(omap_dm9000_resources),
+ .resource = omap_dm9000_resources,
+ .dev = {
+ .platform_data = &omap_dm9000_platdata,
+ },
+};
+
+static void __init omap_dm9000_init(void)
+{
+ if (gpio_request(OMAP_DM9000_GPIO_IRQ, "dm9000 irq") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n",
+ OMAP_DM9000_GPIO_IRQ);
+ return;
+ }
+
+ gpio_direction_input(OMAP_DM9000_GPIO_IRQ);
+}
+
+static struct platform_device *devkit8000_devices[] __initdata = {
+ &devkit8000_dss_device,
+ &leds_gpio,
+ &keys_gpio,
+ &omap_dm9000_dev,
+};
+
+static void __init devkit8000_flash_init(void)
+{
+ u8 cs = 0;
+ u8 nandcs = GPMC_CS_NUM + 1;
+
+ u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
+
+ /* find out the chip-select on which NAND exists */
+ while (cs < GPMC_CS_NUM) {
+ u32 ret = 0;
+ ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+ if ((ret & 0xC00) == 0x800) {
+ printk(KERN_INFO "Found NAND on CS%d\n", cs);
+ if (nandcs > GPMC_CS_NUM)
+ nandcs = cs;
+ }
+ cs++;
+ }
+
+ if (nandcs > GPMC_CS_NUM) {
+ printk(KERN_INFO "NAND: Unable to find configuration "
+ "in GPMC\n ");
+ return;
+ }
+
+ if (nandcs < GPMC_CS_NUM) {
+ devkit8000_nand_data.cs = nandcs;
+ devkit8000_nand_data.gpmc_cs_baseaddr = (void *)
+ (gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
+ devkit8000_nand_data.gpmc_baseaddr = (void *)
+ (gpmc_base_add);
+
+ printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
+ if (platform_device_register(&devkit8000_nand_device) < 0)
+ printk(KERN_ERR "Unable to register NAND device\n");
+ }
+}
+
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+ .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+ .phy_reset = true,
+ .reset_gpio_port[0] = -EINVAL,
+ .reset_gpio_port[1] = 147,
+ .reset_gpio_port[2] = -EINVAL
+};
+
+static void __init devkit8000_init(void)
+{
+ devkit8000_i2c_init();
+ platform_add_devices(devkit8000_devices,
+ ARRAY_SIZE(devkit8000_devices));
+ omap_board_config = devkit8000_config;
+ omap_board_config_size = ARRAY_SIZE(devkit8000_config);
+
+ spi_register_board_info(devkit8000_spi_board_info,
+ ARRAY_SIZE(devkit8000_spi_board_info));
+
+ omap_serial_init();
+
+ omap_dm9000_init();
+
+ devkit8000_ads7846_init();
+
+ omap_mux_init_gpio(170, OMAP_PIN_INPUT);
+
+ gpio_request(170, "DVI_nPD");
+ /* REVISIT leave DVI powered down until it's needed ... */
+ gpio_direction_output(170, true);
+
+ usb_musb_init(&musb_board_data);
+ usb_ehci_init(&ehci_pdata);
+ devkit8000_flash_init();
+
+ /* Ensure SDRC pins are mux'd for self-refresh */
+ omap_mux_init_signal("sdr_cke0", OMAP_PIN_OUTPUT);
+ omap_mux_init_signal("sdr_cke1", OMAP_PIN_OUTPUT);
+}
+
+static void __init devkit8000_map_io(void)
+{
+ omap2_set_globals_343x();
+ omap34xx_map_common_io();
+}
+
+MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = devkit8000_map_io,
+ .init_irq = devkit8000_init_irq,
+ .init_machine = devkit8000_init,
+ .timer = &omap_timer,
+MACHINE_END
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/leds.h>
#include <linux/interrupt.h>
#include <linux/regulator/machine.h>
#include <plat/common.h>
#include <plat/gpmc.h>
#include <plat/usb.h>
+#include <plat/display.h>
+#include <plat/onenand.h>
#include "mux.h"
#include "hsmmc.h"
+#include "sdram-numonyx-m65kxxxxam.h"
#define IGEP2_SMSC911X_CS 5
#define IGEP2_SMSC911X_GPIO 176
#define IGEP2_GPIO_LED0_RED 26
#define IGEP2_GPIO_LED0_GREEN 27
#define IGEP2_GPIO_LED1_RED 28
+#define IGEP2_GPIO_DVI_PUP 170
+#define IGEP2_GPIO_WIFI_NPD 94
+#define IGEP2_GPIO_WIFI_NRESET 95
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+#define ONENAND_MAP 0x20000000
+
+/* NAND04GR4E1A ( x2 Flash built-in COMBO POP MEMORY )
+ * Since the device is equipped with two DataRAMs, and two-plane NAND
+ * Flash memory array, these two component enables simultaneous program
+ * of 4KiB. Plane1 has only even blocks such as block0, block2, block4
+ * while Plane2 has only odd blocks such as block1, block3, block5.
+ * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048)
+ */
+
+static struct mtd_partition igep2_onenand_partitions[] = {
+ {
+ .name = "X-Loader",
+ .offset = 0,
+ .size = 2 * (64*(2*2048))
+ },
+ {
+ .name = "U-Boot",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 6 * (64*(2*2048)),
+ },
+ {
+ .name = "Environment",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 2 * (64*(2*2048)),
+ },
+ {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 12 * (64*(2*2048)),
+ },
+ {
+ .name = "File System",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static int igep2_onenand_setup(void __iomem *onenand_base, int freq)
+{
+ /* nothing is required to be setup for onenand as of now */
+ return 0;
+}
+
+static struct omap_onenand_platform_data igep2_onenand_data = {
+ .parts = igep2_onenand_partitions,
+ .nr_parts = ARRAY_SIZE(igep2_onenand_partitions),
+ .onenand_setup = igep2_onenand_setup,
+ .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */
+};
+
+static struct platform_device igep2_onenand_device = {
+ .name = "omap2-onenand",
+ .id = -1,
+ .dev = {
+ .platform_data = &igep2_onenand_data,
+ },
+};
+
+void __init igep2_flash_init(void)
+{
+ u8 cs = 0;
+ u8 onenandcs = GPMC_CS_NUM + 1;
+
+ while (cs < GPMC_CS_NUM) {
+ u32 ret = 0;
+ ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+ /* Check if NAND/oneNAND is configured */
+ if ((ret & 0xC00) == 0x800)
+ /* NAND found */
+ pr_err("IGEP v2: Unsupported NAND found\n");
+ else {
+ ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+ if ((ret & 0x3F) == (ONENAND_MAP >> 24))
+ /* ONENAND found */
+ onenandcs = cs;
+ }
+ cs++;
+ }
+ if (onenandcs > GPMC_CS_NUM) {
+ pr_err("IGEP v2: Unable to find configuration in GPMC\n");
+ return;
+ }
+
+ if (onenandcs < GPMC_CS_NUM) {
+ igep2_onenand_data.cs = onenandcs;
+ if (platform_device_register(&igep2_onenand_device) < 0)
+ pr_err("IGEP v2: Unable to register OneNAND device\n");
+ }
+}
+
+#else
+void __init igep2_flash_init(void) {}
+#endif
#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
.supply = "vmmc",
};
+static struct regulator_consumer_supply igep2_vmmc2_supply = {
+ .supply = "vmmc",
+};
+
/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
static struct regulator_init_data igep2_vmmc1 = {
.constraints = {
.consumer_supplies = &igep2_vmmc1_supply,
};
+/* VMMC2 for OMAP VDD_MMC2 (i/o) and MMC2 WIFI */
+static struct regulator_init_data igep2_vmmc2 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &igep2_vmmc2_supply,
+};
+
static struct omap2_hsmmc_info mmc[] = {
{
.mmc = 1,
* regulators will be set up only *after* we return.
*/
igep2_vmmc1_supply.dev = mmc[0].dev;
+ igep2_vmmc2_supply.dev = mmc[1].dev;
return 0;
};
.usb_mode = T2_USB_MODE_ULPI,
};
+static int igep2_enable_dvi(struct omap_dss_device *dssdev)
+{
+ gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1);
+
+ return 0;
+}
+
+static void igep2_disable_dvi(struct omap_dss_device *dssdev)
+{
+ gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0);
+}
+
+static struct omap_dss_device igep2_dvi_device = {
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .name = "dvi",
+ .driver_name = "generic_panel",
+ .phy.dpi.data_lines = 24,
+ .platform_enable = igep2_enable_dvi,
+ .platform_disable = igep2_disable_dvi,
+};
+
+static struct omap_dss_device *igep2_dss_devices[] = {
+ &igep2_dvi_device
+};
+
+static struct omap_dss_board_info igep2_dss_data = {
+ .num_devices = ARRAY_SIZE(igep2_dss_devices),
+ .devices = igep2_dss_devices,
+ .default_device = &igep2_dvi_device,
+};
+
+static struct platform_device igep2_dss_device = {
+ .name = "omapdss",
+ .id = -1,
+ .dev = {
+ .platform_data = &igep2_dss_data,
+ },
+};
+
+static struct regulator_consumer_supply igep2_vpll2_supply = {
+ .supply = "vdds_dsi",
+ .dev = &igep2_dss_device.dev,
+};
+
+static struct regulator_init_data igep2_vpll2 = {
+ .constraints = {
+ .name = "VDVI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &igep2_vpll2_supply,
+};
+
+static void __init igep2_display_init(void)
+{
+ if (gpio_request(IGEP2_GPIO_DVI_PUP, "GPIO_DVI_PUP") &&
+ gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1))
+ pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n");
+}
+#ifdef CONFIG_LEDS_TRIGGERS
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "GPIO_LED1_RED",
+ .default_trigger = "heartbeat",
+ .gpio = IGEP2_GPIO_LED1_RED,
+ },
+};
+
+static struct gpio_led_platform_data gpio_leds_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_leds_info,
+ },
+};
+#endif
+
+static struct platform_device *igep2_devices[] __initdata = {
+ &igep2_dss_device,
+#ifdef CONFIG_LEDS_TRIGGERS
+ &leds_gpio,
+#endif
+};
+
static void __init igep2_init_irq(void)
{
omap_board_config = igep2_config;
omap_board_config_size = ARRAY_SIZE(igep2_config);
- omap2_init_common_hw(NULL, NULL);
+ omap2_init_common_hw(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
+static struct twl4030_codec_audio_data igep2_audio_data = {
+ .audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data igep2_codec_data = {
+ .audio_mclk = 26000000,
+ .audio = &igep2_audio_data,
+};
+
static struct twl4030_platform_data igep2_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.usb = &igep2_usb_data,
+ .codec = &igep2_codec_data,
.gpio = &igep2_gpio_data,
.vmmc1 = &igep2_vmmc1,
+ .vmmc2 = &igep2_vmmc2,
+ .vpll2 = &igep2_vpll2,
};
return 0;
}
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+ .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+ .phy_reset = true,
+ .reset_gpio_port[0] = -EINVAL,
+ .reset_gpio_port[1] = IGEP2_GPIO_USBH_NRESET,
+ .reset_gpio_port[2] = -EINVAL,
+};
+
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
igep2_i2c_init();
+ platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices));
omap_serial_init();
- usb_musb_init();
+ usb_musb_init(&musb_board_data);
+ usb_ehci_init(&ehci_pdata);
+ igep2_flash_init();
+ igep2_display_init();
igep2_init_smsc911x();
/* GPIO userspace leds */
gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0);
} else
pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n");
-
+#ifndef CONFIG_LEDS_TRIGGERS
if ((gpio_request(IGEP2_GPIO_LED1_RED, "GPIO_LED1_RED") == 0) &&
(gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) {
gpio_export(IGEP2_GPIO_LED1_RED, 0);
gpio_set_value(IGEP2_GPIO_LED1_RED, 0);
} else
pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n");
+#endif
+ /* GPIO W-LAN + Bluetooth combo module */
+ if ((gpio_request(IGEP2_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) &&
+ (gpio_direction_output(IGEP2_GPIO_WIFI_NPD, 1) == 0)) {
+ gpio_export(IGEP2_GPIO_WIFI_NPD, 0);
+/* gpio_set_value(IGEP2_GPIO_WIFI_NPD, 0); */
+ } else
+ pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NPD\n");
+
+ if ((gpio_request(IGEP2_GPIO_WIFI_NRESET, "GPIO_WIFI_NRESET") == 0) &&
+ (gpio_direction_output(IGEP2_GPIO_WIFI_NRESET, 1) == 0)) {
+ gpio_export(IGEP2_GPIO_WIFI_NRESET, 0);
+ gpio_set_value(IGEP2_GPIO_WIFI_NRESET, 0);
+ udelay(10);
+ gpio_set_value(IGEP2_GPIO_WIFI_NRESET, 1);
+ } else
+ pr_warning("IGEP v2: Could not obtain gpio GPIO_WIFI_NRESET\n");
}
static void __init igep2_map_io(void)
#define board_mux NULL
#endif
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init omap_ldp_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
ARRAY_SIZE(ldp_spi_board_info));
ads7846_dev_init();
omap_serial_init();
- usb_musb_init();
+ usb_musb_init(&musb_board_data);
omap2_hsmmc_init(mmc);
/* link regulators to MMC adapters */
#define board_mux NULL
#endif
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init omap3_beagle_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
/* REVISIT leave DVI powered down until it's needed ... */
gpio_direction_output(170, true);
- usb_musb_init();
+ usb_musb_init(&musb_board_data);
usb_ehci_init(&ehci_pdata);
omap3beagle_flash_init();
static int board_keymap[] = {
KEY(0, 0, KEY_LEFT),
- KEY(0, 1, KEY_RIGHT),
- KEY(0, 2, KEY_A),
- KEY(0, 3, KEY_B),
- KEY(1, 0, KEY_DOWN),
+ KEY(0, 1, KEY_DOWN),
+ KEY(0, 2, KEY_ENTER),
+ KEY(0, 3, KEY_M),
+
+ KEY(1, 0, KEY_RIGHT),
KEY(1, 1, KEY_UP),
- KEY(1, 2, KEY_E),
- KEY(1, 3, KEY_F),
- KEY(2, 0, KEY_ENTER),
- KEY(2, 1, KEY_I),
+ KEY(1, 2, KEY_I),
+ KEY(1, 3, KEY_N),
+
+ KEY(2, 0, KEY_A),
+ KEY(2, 1, KEY_E),
KEY(2, 2, KEY_J),
- KEY(2, 3, KEY_K),
- KEY(3, 0, KEY_M),
- KEY(3, 1, KEY_N),
- KEY(3, 2, KEY_O),
+ KEY(2, 3, KEY_O),
+
+ KEY(3, 0, KEY_B),
+ KEY(3, 1, KEY_F),
+ KEY(3, 2, KEY_K),
KEY(3, 3, KEY_P)
};
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
+ OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP |
+ OMAP_PIN_OFF_INPUT_PULLUP |
+ OMAP_PIN_OFF_WAKEUPENABLE),
+ OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP |
+ OMAP_PIN_OFF_INPUT_PULLUP |
+ OMAP_PIN_OFF_WAKEUPENABLE),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init omap3_evm_init(void)
{
omap3_evm_get_revision();
ARRAY_SIZE(omap3evm_spi_board_info));
omap_serial_init();
-#ifdef CONFIG_NOP_USB_XCEIV
+
/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
usb_nop_xceiv_register();
-#endif
+
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
/* enable EHCI VBUS using GPIO22 */
omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP);
omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
ehci_pdata.reset_gpio_port[1] = 135;
}
- usb_musb_init();
+ usb_musb_init(&musb_board_data);
usb_ehci_init(&ehci_pdata);
ads7846_dev_init();
omap3evm_init_smsc911x();
#include <mach/hardware.h>
#include <plat/mcspi.h>
#include <plat/usb.h>
+#include <plat/display.h>
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
.rep = 1,
};
+static struct omap_dss_device pandora_lcd_device = {
+ .name = "lcd",
+ .driver_name = "tpo_td043mtea1_panel",
+ .type = OMAP_DISPLAY_TYPE_DPI,
+ .phy.dpi.data_lines = 24,
+ .reset_gpio = 157,
+};
+
+static struct omap_dss_device pandora_tv_device = {
+ .name = "tv",
+ .driver_name = "venc",
+ .type = OMAP_DISPLAY_TYPE_VENC,
+ .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO,
+};
+
+static struct omap_dss_device *pandora_dss_devices[] = {
+ &pandora_lcd_device,
+ &pandora_tv_device,
+};
+
+static struct omap_dss_board_info pandora_dss_data = {
+ .num_devices = ARRAY_SIZE(pandora_dss_devices),
+ .devices = pandora_dss_devices,
+ .default_device = &pandora_lcd_device,
+};
+
+static struct platform_device pandora_dss_device = {
+ .name = "omapdss",
+ .id = -1,
+ .dev = {
+ .platform_data = &pandora_dss_data,
+ },
+};
+
static struct omap2_hsmmc_info omap3pandora_mmc[] = {
{
.mmc = 1,
{} /* Terminator */
};
-static struct regulator_consumer_supply pandora_vmmc1_supply = {
- .supply = "vmmc",
-};
-
-static struct regulator_consumer_supply pandora_vmmc2_supply = {
- .supply = "vmmc",
-};
-
static int omap3pandora_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
omap3pandora_mmc[1].gpio_cd = gpio + 1;
omap2_hsmmc_init(omap3pandora_mmc);
- /* link regulators to MMC adapters */
- pandora_vmmc1_supply.dev = omap3pandora_mmc[0].dev;
- pandora_vmmc2_supply.dev = omap3pandora_mmc[1].dev;
-
return 0;
}
.setup = omap3pandora_twl_gpio_setup,
};
+static struct regulator_consumer_supply pandora_vmmc1_supply =
+ REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0");
+
+static struct regulator_consumer_supply pandora_vmmc2_supply =
+ REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1");
+
+static struct regulator_consumer_supply pandora_vdda_dac_supply =
+ REGULATOR_SUPPLY("vdda_dac", "omapdss");
+
+static struct regulator_consumer_supply pandora_vdds_supplies[] = {
+ REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
+ REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
+};
+
+static struct regulator_consumer_supply pandora_vcc_lcd_supply =
+ REGULATOR_SUPPLY("vcc", "display0");
+
+static struct regulator_consumer_supply pandora_usb_phy_supply =
+ REGULATOR_SUPPLY("hsusb0", "ehci-omap.0");
+
+/* ads7846 on SPI and 2 nub controllers on I2C */
+static struct regulator_consumer_supply pandora_vaux4_supplies[] = {
+ REGULATOR_SUPPLY("vcc", "spi1.0"),
+ REGULATOR_SUPPLY("vcc", "3-0066"),
+ REGULATOR_SUPPLY("vcc", "3-0067"),
+};
+
+static struct regulator_consumer_supply pandora_adac_supply =
+ REGULATOR_SUPPLY("vcc", "soc-audio");
+
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
static struct regulator_init_data pandora_vmmc1 = {
.constraints = {
.consumer_supplies = &pandora_vmmc2_supply,
};
+/* VDAC for DSS driving S-Video */
+static struct regulator_init_data pandora_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &pandora_vdda_dac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data pandora_vpll2 = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(pandora_vdds_supplies),
+ .consumer_supplies = pandora_vdds_supplies,
+};
+
+/* VAUX1 for LCD */
+static struct regulator_init_data pandora_vaux1 = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &pandora_vcc_lcd_supply,
+};
+
+/* VAUX2 for USB host PHY */
+static struct regulator_init_data pandora_vaux2 = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &pandora_usb_phy_supply,
+};
+
+/* VAUX4 for ads7846 and nubs */
+static struct regulator_init_data pandora_vaux4 = {
+ .constraints = {
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(pandora_vaux4_supplies),
+ .consumer_supplies = pandora_vaux4_supplies,
+};
+
+/* VSIM for audio DAC */
+static struct regulator_init_data pandora_vsim = {
+ .constraints = {
+ .min_uV = 2800000,
+ .max_uV = 2800000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &pandora_adac_supply,
+};
+
static struct twl4030_usb_data omap3pandora_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
.codec = &omap3pandora_codec_data,
.vmmc1 = &pandora_vmmc1,
.vmmc2 = &pandora_vmmc2,
+ .vdac = &pandora_vdac,
+ .vpll2 = &pandora_vpll2,
+ .vaux1 = &pandora_vaux1,
+ .vaux2 = &pandora_vaux2,
+ .vaux4 = &pandora_vaux4,
+ .vsim = &pandora_vsim,
.keypad = &pandora_kp_data,
};
.controller_data = &ads7846_mcspi_config,
.irq = OMAP_GPIO_IRQ(OMAP3_PANDORA_TS_GPIO),
.platform_data = &ads7846_config,
+ }, {
+ .modalias = "tpo_td043mtea1_panel_spi",
+ .bus_num = 1,
+ .chip_select = 1,
+ .max_speed_hz = 375000,
+ .platform_data = &pandora_lcd_device,
}
};
static struct platform_device *omap3pandora_devices[] __initdata = {
&pandora_leds_gpio,
&pandora_keys_gpio,
+ &pandora_dss_device,
};
static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
#define board_mux NULL
#endif
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init omap3pandora_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3pandora_ads7846_init();
usb_ehci_init(&ehci_pdata);
pandora_keys_gpio_init();
- usb_musb_init();
+ usb_musb_init(&musb_board_data);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
}
__early_param("tbr=", early_touchbook_revision);
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init omap3_touchbook_init(void)
{
pm_power_off = omap3_touchbook_poweroff;
spi_register_board_info(omap3_ads7846_spi_board_info,
ARRAY_SIZE(omap3_ads7846_spi_board_info));
omap3_ads7846_init();
- usb_musb_init();
+ usb_musb_init(&musb_board_data);
usb_ehci_init(&ehci_pdata);
omap3touchbook_flash_init();
#define board_mux NULL
#endif
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void __init overo_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
omap_serial_init();
overo_flash_init();
- usb_musb_init();
+ usb_musb_init(&musb_board_data);
usb_ehci_init(&ehci_pdata);
overo_ads7846_init();
overo_init_smsc911x();
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/gpio.h>
+#include <linux/leds.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <plat/usb.h>
#include "mux.h"
+#include "pm.h"
+
+#define RX51_GPIO_SLEEP_IND 162
struct omap_sdrc_params *rx51_get_sdram_timings(void);
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "sleep_ind",
+ .gpio = RX51_GPIO_SLEEP_IND,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ },
+};
+
+static struct cpuidle_params rx51_cpuidle_params[] = {
+ /* C1 */
+ {1, 110, 162, 5},
+ /* C2 */
+ {1, 106, 180, 309},
+ /* C3 */
+ {0, 107, 410, 46057},
+ /* C4 */
+ {0, 121, 3374, 46057},
+ /* C5 */
+ {1, 855, 1146, 46057},
+ /* C6 */
+ {0, 7580, 4134, 484329},
+ /* C7 */
+ {1, 7505, 15274, 484329},
+};
+
static struct omap_lcd_config rx51_lcd_config = {
.ctrl_name = "internal",
};
omap_board_config = rx51_config;
omap_board_config_size = ARRAY_SIZE(rx51_config);
+ omap3_pm_init_cpuidle(rx51_cpuidle_params);
sdrc_params = rx51_get_sdram_timings();
omap2_init_common_hw(sdrc_params, sdrc_params);
omap_init_irq();
#define board_mux NULL
#endif
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_PERIPHERAL,
+ .power = 0,
+};
+
static void __init rx51_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_serial_init();
- usb_musb_init();
+ usb_musb_init(&musb_board_data);
rx51_peripherals_init();
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
+
+ platform_device_register(&leds_gpio);
}
static void __init rx51_map_io(void)
return 0;
}
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+ .mode = MUSB_OTG,
+ .power = 100,
+};
+
static void enable_board_wakeup_source(void)
{
/* T2 interrupt line (keypad) */
{
omap_i2c_init();
omap_serial_init();
- usb_musb_init();
+ usb_musb_init(&musb_board_data);
enable_board_wakeup_source();
}
#include <plat/common.h>
#include <plat/board.h>
+#include <plat/usb.h>
#include "mux.h"
#include "sdram-hynix-h8mbx00u0mer-0em.h"
#define board_mux NULL
#endif
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+ .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+ .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+ .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+ .phy_reset = true,
+ .reset_gpio_port[0] = -EINVAL,
+ .reset_gpio_port[1] = 64,
+ .reset_gpio_port[2] = -EINVAL,
+};
+
static void __init omap_zoom_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
zoom_peripherals_init();
zoom_debugboard_init();
+
+ omap_mux_init_gpio(64, OMAP_PIN_OUTPUT);
+ usb_ehci_init(&ehci_pdata);
}
MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
{
- omap2_ctrl_base = omap2_globals->ctrl;
+ /* Static mapping, never released */
+ if (omap2_globals->ctrl) {
+ omap2_ctrl_base = ioremap(omap2_globals->ctrl, SZ_4K);
+ WARN_ON(!omap2_ctrl_base);
+ }
}
void __iomem *omap_ctrl_base_get(void)
#define OMAP3_STATE_C6 5 /* C6 - MPU OFF + Core RET */
#define OMAP3_STATE_C7 6 /* C7 - MPU OFF + Core OFF */
+#define OMAP3_STATE_MAX OMAP3_STATE_C7
+
struct omap3_processor_cx {
u8 valid;
u8 type;
struct omap3_processor_cx current_cx_state;
struct powerdomain *mpu_pd, *core_pd;
+/*
+ * The latencies/thresholds for various C states have
+ * to be configured from the respective board files.
+ * These are some default values (which might not provide
+ * the best power savings) used on boards which do not
+ * pass these details from the board file.
+ */
+static struct cpuidle_params cpuidle_params_table[] = {
+ /* C1 */
+ {1, 2, 2, 5},
+ /* C2 */
+ {1, 10, 10, 30},
+ /* C3 */
+ {1, 50, 50, 300},
+ /* C4 */
+ {1, 1500, 1800, 4000},
+ /* C5 */
+ {1, 2500, 7500, 12000},
+ /* C6 */
+ {1, 3000, 8500, 15000},
+ /* C7 */
+ {1, 10000, 30000, 300000},
+};
+
static int omap3_idle_bm_check(void)
{
if (!omap3_can_sleep())
local_irq_disable();
local_fiq_disable();
- if (!enable_off_mode) {
- if (mpu_state < PWRDM_POWER_RET)
- mpu_state = PWRDM_POWER_RET;
- if (core_state < PWRDM_POWER_RET)
- core_state = PWRDM_POWER_RET;
- }
-
pwrdm_set_next_pwrst(mpu_pd, mpu_state);
pwrdm_set_next_pwrst(core_pd, core_state);
return ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * USEC_PER_SEC;
}
+/**
+ * next_valid_state - Find next valid c-state
+ * @dev: cpuidle device
+ * @state: Currently selected c-state
+ *
+ * If the current state is valid, it is returned back to the caller.
+ * Else, this function searches for a lower c-state which is still
+ * valid (as defined in omap3_power_states[]).
+ */
+static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev,
+ struct cpuidle_state *curr)
+{
+ struct cpuidle_state *next = NULL;
+ struct omap3_processor_cx *cx;
+
+ cx = (struct omap3_processor_cx *)cpuidle_get_statedata(curr);
+
+ /* Check if current state is valid */
+ if (cx->valid) {
+ return curr;
+ } else {
+ u8 idx = OMAP3_STATE_MAX;
+
+ /*
+ * Reach the current state starting at highest C-state
+ */
+ for (; idx >= OMAP3_STATE_C1; idx--) {
+ if (&dev->states[idx] == curr) {
+ next = &dev->states[idx];
+ break;
+ }
+ }
+
+ /*
+ * Should never hit this condition.
+ */
+ WARN_ON(next == NULL);
+
+ /*
+ * Drop to next valid state.
+ * Start search from the next (lower) state.
+ */
+ idx--;
+ for (; idx >= OMAP3_STATE_C1; idx--) {
+ struct omap3_processor_cx *cx;
+
+ cx = cpuidle_get_statedata(&dev->states[idx]);
+ if (cx->valid) {
+ next = &dev->states[idx];
+ break;
+ }
+ }
+ /*
+ * C1 and C2 are always valid.
+ * So, no need to check for 'next==NULL' outside this loop.
+ */
+ }
+
+ return next;
+}
+
/**
* omap3_enter_idle_bm - Checks for any bus activity
* @dev: cpuidle device
static int omap3_enter_idle_bm(struct cpuidle_device *dev,
struct cpuidle_state *state)
{
- struct cpuidle_state *new_state = state;
+ struct cpuidle_state *new_state = next_valid_state(dev, state);
if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) {
BUG_ON(!dev->safe_state);
DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
+/**
+ * omap3_cpuidle_update_states - Update the cpuidle states.
+ *
+ * Currently, this function toggles the validity of idle states based upon
+ * the flag 'enable_off_mode'. When the flag is set all states are valid.
+ * Else, states leading to OFF state set to be invalid.
+ */
+void omap3_cpuidle_update_states(void)
+{
+ int i;
+
+ for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) {
+ struct omap3_processor_cx *cx = &omap3_power_states[i];
+
+ if (enable_off_mode) {
+ cx->valid = 1;
+ } else {
+ if ((cx->mpu_state == PWRDM_POWER_OFF) ||
+ (cx->core_state == PWRDM_POWER_OFF))
+ cx->valid = 0;
+ }
+ }
+}
+
+void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params)
+{
+ int i;
+
+ if (!cpuidle_board_params)
+ return;
+
+ for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) {
+ cpuidle_params_table[i].valid =
+ cpuidle_board_params[i].valid;
+ cpuidle_params_table[i].sleep_latency =
+ cpuidle_board_params[i].sleep_latency;
+ cpuidle_params_table[i].wake_latency =
+ cpuidle_board_params[i].wake_latency;
+ cpuidle_params_table[i].threshold =
+ cpuidle_board_params[i].threshold;
+ }
+ return;
+}
+
/* omap3_init_power_states - Initialises the OMAP3 specific C states.
*
* Below is the desciption of each C state.
void omap_init_power_states(void)
{
/* C1 . MPU WFI + Core active */
- omap3_power_states[OMAP3_STATE_C1].valid = 1;
+ omap3_power_states[OMAP3_STATE_C1].valid =
+ cpuidle_params_table[OMAP3_STATE_C1].valid;
omap3_power_states[OMAP3_STATE_C1].type = OMAP3_STATE_C1;
- omap3_power_states[OMAP3_STATE_C1].sleep_latency = 2;
- omap3_power_states[OMAP3_STATE_C1].wakeup_latency = 2;
- omap3_power_states[OMAP3_STATE_C1].threshold = 5;
+ omap3_power_states[OMAP3_STATE_C1].sleep_latency =
+ cpuidle_params_table[OMAP3_STATE_C1].sleep_latency;
+ omap3_power_states[OMAP3_STATE_C1].wakeup_latency =
+ cpuidle_params_table[OMAP3_STATE_C1].wake_latency;
+ omap3_power_states[OMAP3_STATE_C1].threshold =
+ cpuidle_params_table[OMAP3_STATE_C1].threshold;
omap3_power_states[OMAP3_STATE_C1].mpu_state = PWRDM_POWER_ON;
omap3_power_states[OMAP3_STATE_C1].core_state = PWRDM_POWER_ON;
omap3_power_states[OMAP3_STATE_C1].flags = CPUIDLE_FLAG_TIME_VALID;
/* C2 . MPU WFI + Core inactive */
- omap3_power_states[OMAP3_STATE_C2].valid = 1;
+ omap3_power_states[OMAP3_STATE_C2].valid =
+ cpuidle_params_table[OMAP3_STATE_C2].valid;
omap3_power_states[OMAP3_STATE_C2].type = OMAP3_STATE_C2;
- omap3_power_states[OMAP3_STATE_C2].sleep_latency = 10;
- omap3_power_states[OMAP3_STATE_C2].wakeup_latency = 10;
- omap3_power_states[OMAP3_STATE_C2].threshold = 30;
+ omap3_power_states[OMAP3_STATE_C2].sleep_latency =
+ cpuidle_params_table[OMAP3_STATE_C2].sleep_latency;
+ omap3_power_states[OMAP3_STATE_C2].wakeup_latency =
+ cpuidle_params_table[OMAP3_STATE_C2].wake_latency;
+ omap3_power_states[OMAP3_STATE_C2].threshold =
+ cpuidle_params_table[OMAP3_STATE_C2].threshold;
omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_ON;
omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON;
omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID;
/* C3 . MPU CSWR + Core inactive */
- omap3_power_states[OMAP3_STATE_C3].valid = 1;
+ omap3_power_states[OMAP3_STATE_C3].valid =
+ cpuidle_params_table[OMAP3_STATE_C3].valid;
omap3_power_states[OMAP3_STATE_C3].type = OMAP3_STATE_C3;
- omap3_power_states[OMAP3_STATE_C3].sleep_latency = 50;
- omap3_power_states[OMAP3_STATE_C3].wakeup_latency = 50;
- omap3_power_states[OMAP3_STATE_C3].threshold = 300;
+ omap3_power_states[OMAP3_STATE_C3].sleep_latency =
+ cpuidle_params_table[OMAP3_STATE_C3].sleep_latency;
+ omap3_power_states[OMAP3_STATE_C3].wakeup_latency =
+ cpuidle_params_table[OMAP3_STATE_C3].wake_latency;
+ omap3_power_states[OMAP3_STATE_C3].threshold =
+ cpuidle_params_table[OMAP3_STATE_C3].threshold;
omap3_power_states[OMAP3_STATE_C3].mpu_state = PWRDM_POWER_RET;
omap3_power_states[OMAP3_STATE_C3].core_state = PWRDM_POWER_ON;
omap3_power_states[OMAP3_STATE_C3].flags = CPUIDLE_FLAG_TIME_VALID |
CPUIDLE_FLAG_CHECK_BM;
/* C4 . MPU OFF + Core inactive */
- omap3_power_states[OMAP3_STATE_C4].valid = 1;
+ omap3_power_states[OMAP3_STATE_C4].valid =
+ cpuidle_params_table[OMAP3_STATE_C4].valid;
omap3_power_states[OMAP3_STATE_C4].type = OMAP3_STATE_C4;
- omap3_power_states[OMAP3_STATE_C4].sleep_latency = 1500;
- omap3_power_states[OMAP3_STATE_C4].wakeup_latency = 1800;
- omap3_power_states[OMAP3_STATE_C4].threshold = 4000;
+ omap3_power_states[OMAP3_STATE_C4].sleep_latency =
+ cpuidle_params_table[OMAP3_STATE_C4].sleep_latency;
+ omap3_power_states[OMAP3_STATE_C4].wakeup_latency =
+ cpuidle_params_table[OMAP3_STATE_C4].wake_latency;
+ omap3_power_states[OMAP3_STATE_C4].threshold =
+ cpuidle_params_table[OMAP3_STATE_C4].threshold;
omap3_power_states[OMAP3_STATE_C4].mpu_state = PWRDM_POWER_OFF;
omap3_power_states[OMAP3_STATE_C4].core_state = PWRDM_POWER_ON;
omap3_power_states[OMAP3_STATE_C4].flags = CPUIDLE_FLAG_TIME_VALID |
CPUIDLE_FLAG_CHECK_BM;
/* C5 . MPU CSWR + Core CSWR*/
- omap3_power_states[OMAP3_STATE_C5].valid = 1;
+ omap3_power_states[OMAP3_STATE_C5].valid =
+ cpuidle_params_table[OMAP3_STATE_C5].valid;
omap3_power_states[OMAP3_STATE_C5].type = OMAP3_STATE_C5;
- omap3_power_states[OMAP3_STATE_C5].sleep_latency = 2500;
- omap3_power_states[OMAP3_STATE_C5].wakeup_latency = 7500;
- omap3_power_states[OMAP3_STATE_C5].threshold = 12000;
+ omap3_power_states[OMAP3_STATE_C5].sleep_latency =
+ cpuidle_params_table[OMAP3_STATE_C5].sleep_latency;
+ omap3_power_states[OMAP3_STATE_C5].wakeup_latency =
+ cpuidle_params_table[OMAP3_STATE_C5].wake_latency;
+ omap3_power_states[OMAP3_STATE_C5].threshold =
+ cpuidle_params_table[OMAP3_STATE_C5].threshold;
omap3_power_states[OMAP3_STATE_C5].mpu_state = PWRDM_POWER_RET;
omap3_power_states[OMAP3_STATE_C5].core_state = PWRDM_POWER_RET;
omap3_power_states[OMAP3_STATE_C5].flags = CPUIDLE_FLAG_TIME_VALID |
CPUIDLE_FLAG_CHECK_BM;
/* C6 . MPU OFF + Core CSWR */
- omap3_power_states[OMAP3_STATE_C6].valid = 1;
+ omap3_power_states[OMAP3_STATE_C6].valid =
+ cpuidle_params_table[OMAP3_STATE_C6].valid;
omap3_power_states[OMAP3_STATE_C6].type = OMAP3_STATE_C6;
- omap3_power_states[OMAP3_STATE_C6].sleep_latency = 3000;
- omap3_power_states[OMAP3_STATE_C6].wakeup_latency = 8500;
- omap3_power_states[OMAP3_STATE_C6].threshold = 15000;
+ omap3_power_states[OMAP3_STATE_C6].sleep_latency =
+ cpuidle_params_table[OMAP3_STATE_C6].sleep_latency;
+ omap3_power_states[OMAP3_STATE_C6].wakeup_latency =
+ cpuidle_params_table[OMAP3_STATE_C6].wake_latency;
+ omap3_power_states[OMAP3_STATE_C6].threshold =
+ cpuidle_params_table[OMAP3_STATE_C6].threshold;
omap3_power_states[OMAP3_STATE_C6].mpu_state = PWRDM_POWER_OFF;
omap3_power_states[OMAP3_STATE_C6].core_state = PWRDM_POWER_RET;
omap3_power_states[OMAP3_STATE_C6].flags = CPUIDLE_FLAG_TIME_VALID |
CPUIDLE_FLAG_CHECK_BM;
/* C7 . MPU OFF + Core OFF */
- omap3_power_states[OMAP3_STATE_C7].valid = 1;
+ omap3_power_states[OMAP3_STATE_C7].valid =
+ cpuidle_params_table[OMAP3_STATE_C7].valid;
omap3_power_states[OMAP3_STATE_C7].type = OMAP3_STATE_C7;
- omap3_power_states[OMAP3_STATE_C7].sleep_latency = 10000;
- omap3_power_states[OMAP3_STATE_C7].wakeup_latency = 30000;
- omap3_power_states[OMAP3_STATE_C7].threshold = 300000;
+ omap3_power_states[OMAP3_STATE_C7].sleep_latency =
+ cpuidle_params_table[OMAP3_STATE_C7].sleep_latency;
+ omap3_power_states[OMAP3_STATE_C7].wakeup_latency =
+ cpuidle_params_table[OMAP3_STATE_C7].wake_latency;
+ omap3_power_states[OMAP3_STATE_C7].threshold =
+ cpuidle_params_table[OMAP3_STATE_C7].threshold;
omap3_power_states[OMAP3_STATE_C7].mpu_state = PWRDM_POWER_OFF;
omap3_power_states[OMAP3_STATE_C7].core_state = PWRDM_POWER_OFF;
omap3_power_states[OMAP3_STATE_C7].flags = CPUIDLE_FLAG_TIME_VALID |
return -EINVAL;
dev->state_count = count;
+ omap3_cpuidle_update_states();
+
if (cpuidle_register_device(dev)) {
printk(KERN_ERR "%s: CPUidle register device failed\n",
__func__);
.flags = IORESOURCE_MEM,
},
{
- .start = INT_44XX_MAIL_U0_MPU,
+ .start = OMAP44XX_IRQ_MAIL_U0,
.flags = IORESOURCE_IRQ,
},
};
if (!cpu_is_omap44xx())
return;
base = OMAP4_MMC4_BASE + OMAP4_MMC_REG_OFFSET;
- irq = INT_44XX_MMC4_IRQ;
+ irq = OMAP44XX_IRQ_MMC4;
break;
case 4:
if (!cpu_is_omap44xx())
return;
base = OMAP4_MMC5_BASE + OMAP4_MMC_REG_OFFSET;
- irq = INT_44XX_MMC5_IRQ;
+ irq = OMAP44XX_IRQ_MMC4;
break;
default:
continue;
} else if (cpu_is_omap44xx()) {
if (i < 3) {
base += OMAP4_MMC_REG_OFFSET;
- irq += IRQ_GIC_START;
+ irq += OMAP44XX_IRQ_GIC_START;
}
size = OMAP4_HSMMC_SIZE;
name = "mmci-omap-hs";
val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
} else if (cpu_is_omap34xx()) {
val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
+ } else if (cpu_is_omap44xx()) {
+ val = omap_ctrl_readl(OMAP44XX_CONTROL_STATUS);
} else {
pr_err("Cannot detect omap type!\n");
goto out;
.length = L4_34XX_SIZE,
.type = MT_DEVICE
},
- {
- .virtual = L4_WK_34XX_VIRT,
- .pfn = __phys_to_pfn(L4_WK_34XX_PHYS),
- .length = L4_WK_34XX_SIZE,
- .type = MT_DEVICE
- },
{
.virtual = OMAP34XX_GPMC_VIRT,
.pfn = __phys_to_pfn(OMAP34XX_GPMC_PHYS),
.length = L4_44XX_SIZE,
.type = MT_DEVICE,
},
- {
- .virtual = L4_WK_44XX_VIRT,
- .pfn = __phys_to_pfn(L4_WK_44XX_PHYS),
- .length = L4_WK_44XX_SIZE,
- .type = MT_DEVICE,
- },
{
.virtual = OMAP44XX_GPMC_VIRT,
.pfn = __phys_to_pfn(OMAP44XX_GPMC_PHYS),
#define AUTOIDLE (1 << 0)
#define SOFTRESET (1 << 1)
#define SMARTIDLE (2 << 3)
+#define OMAP4_SOFTRESET (1 << 0)
+#define OMAP4_NOIDLE (1 << 2)
+#define OMAP4_SMARTIDLE (2 << 2)
/* SYSSTATUS: register bit definition */
#define RESETDONE (1 << 0)
}
clk_enable(mbox_ick_handle);
- mbox_write_reg(SOFTRESET, MAILBOX_SYSCONFIG);
- timeout = jiffies + msecs_to_jiffies(20);
- do {
- l = mbox_read_reg(MAILBOX_SYSSTATUS);
- if (l & RESETDONE)
- break;
- } while (!time_after(jiffies, timeout));
-
- if (!(l & RESETDONE)) {
- pr_err("Can't take mmu out of reset\n");
- return -ENODEV;
+ if (cpu_is_omap44xx()) {
+ mbox_write_reg(OMAP4_SOFTRESET, MAILBOX_SYSCONFIG);
+ timeout = jiffies + msecs_to_jiffies(20);
+ do {
+ l = mbox_read_reg(MAILBOX_SYSCONFIG);
+ if (!(l & OMAP4_SOFTRESET))
+ break;
+ } while (!time_after(jiffies, timeout));
+
+ if (l & OMAP4_SOFTRESET) {
+ pr_err("Can't take mailbox out of reset\n");
+ return -ENODEV;
+ }
+ } else {
+ mbox_write_reg(SOFTRESET, MAILBOX_SYSCONFIG);
+ timeout = jiffies + msecs_to_jiffies(20);
+ do {
+ l = mbox_read_reg(MAILBOX_SYSSTATUS);
+ if (l & RESETDONE)
+ break;
+ } while (!time_after(jiffies, timeout));
+
+ if (!(l & RESETDONE)) {
+ pr_err("Can't take mailbox out of reset\n");
+ return -ENODEV;
+ }
}
l = mbox_read_reg(MAILBOX_REVISION);
pr_info("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
- l = SMARTIDLE | AUTOIDLE;
+ if (cpu_is_omap44xx())
+ l = OMAP4_SMARTIDLE;
+ else
+ l = SMARTIDLE | AUTOIDLE;
mbox_write_reg(l, MAILBOX_SYSCONFIG);
omap2_mbox_enable_irq(mbox, IRQ_RX);
},
{
.phys_base = OMAP34XX_MCBSP2_BASE,
+ .phys_base_st = OMAP34XX_MCBSP2_ST_BASE,
.dma_rx_sync = OMAP24XX_DMA_MCBSP2_RX,
.dma_tx_sync = OMAP24XX_DMA_MCBSP2_TX,
.rx_irq = INT_24XX_MCBSP2_IRQ_RX,
},
{
.phys_base = OMAP34XX_MCBSP3_BASE,
+ .phys_base_st = OMAP34XX_MCBSP3_ST_BASE,
.dma_rx_sync = OMAP24XX_DMA_MCBSP3_RX,
.dma_tx_sync = OMAP24XX_DMA_MCBSP3_TX,
.rx_irq = INT_24XX_MCBSP3_IRQ_RX,
extern int set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
extern int omap3_idle_init(void);
+struct cpuidle_params {
+ u8 valid;
+ u32 sleep_latency;
+ u32 wake_latency;
+ u32 threshold;
+};
+
+#if defined(CONFIG_PM) && defined(CONFIG_CPU_IDLE)
+extern void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params);
+#else
+static
+inline void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params)
+{
+}
+#endif
+
extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
#define omap2_pm_debug 0
#endif
+#if defined(CONFIG_CPU_IDLE)
+extern void omap3_cpuidle_update_states(void);
+#endif
+
#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
extern int pm_dbg_regset_save(int reg_set);
else
state = PWRDM_POWER_RET;
+#ifdef CONFIG_CPU_IDLE
+ omap3_cpuidle_update_states();
+#endif
+
list_for_each_entry(pwrst, &pwrst_list, node) {
pwrst->next_state = state;
set_pwrdm_state(pwrst->pwrdm, state);
void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
{
- prm_base = omap2_globals->prm;
- cm_base = omap2_globals->cm;
- cm2_base = omap2_globals->cm2;
+ /* Static mapping, never released */
+ if (omap2_globals->prm) {
+ prm_base = ioremap(omap2_globals->prm, SZ_8K);
+ WARN_ON(!prm_base);
+ }
+ if (omap2_globals->cm) {
+ cm_base = ioremap(omap2_globals->cm, SZ_8K);
+ WARN_ON(!cm_base);
+ }
+ if (omap2_globals->cm2) {
+ cm2_base = ioremap(omap2_globals->cm2, SZ_8K);
+ WARN_ON(!cm2_base);
+ }
}
#ifdef CONFIG_ARCH_OMAP3
--- /dev/null
+/*
+ * SDRC register values for the Numonyx M65KXXXXAM
+ *
+ * Copyright (C) 2009 Integration Software and Electronic Engineering.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
+#define __ARCH_ARM_MACH_OMAP2_SDRAM_NUMONYX_M65KXXXXAM
+
+#include <plat/sdrc.h>
+
+/* Numonyx M65KXXXXAM */
+static struct omap_sdrc_params m65kxxxxam_sdrc_params[] = {
+ [0] = {
+ .rate = 200000000,
+ .actim_ctrla = 0xe321d4c6,
+ .actim_ctrlb = 0x00022328,
+ .rfr_ctrl = 0x0005e601,
+ .mr = 0x00000032,
+ },
+ [1] = {
+ .rate = 166000000,
+ .actim_ctrla = 0xba9dc485,
+ .actim_ctrlb = 0x00022321,
+ .rfr_ctrl = 0x0004dc01,
+ .mr = 0x00000032,
+ },
+ [2] = {
+ .rate = 133000000,
+ .actim_ctrla = 0x9a19b485,
+ .actim_ctrlb = 0x0002231b,
+ .rfr_ctrl = 0x0003de01,
+ .mr = 0x00000032,
+ },
+ [3] = {
+ .rate = 83000000,
+ .actim_ctrla = 0x594ca242,
+ .actim_ctrlb = 0x00022310,
+ .rfr_ctrl = 0x00025501,
+ .mr = 0x00000032,
+ },
+ [4] = {
+ .rate = 0
+ },
+};
+
+#endif
void __init omap2_set_globals_sdrc(struct omap_globals *omap2_globals)
{
- omap2_sdrc_base = omap2_globals->sdrc;
- omap2_sms_base = omap2_globals->sms;
+ /* Static mapping, never released */
+ if (omap2_globals->sdrc) {
+ omap2_sdrc_base = ioremap(omap2_globals->sdrc, SZ_64K);
+ WARN_ON(!omap2_sdrc_base);
+ }
+ if (omap2_globals->sms) {
+ omap2_sms_base = ioremap(omap2_globals->sms, SZ_64K);
+ WARN_ON(!omap2_sms_base);
+ }
}
/**
#include <linux/serial_reg.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/delay.h>
#include <plat/common.h>
#include <plat/board.h>
return (unsigned int)__raw_readb(up->membase + offset);
}
+static inline void __serial_write_reg(struct uart_port *up, int offset,
+ int value)
+{
+ offset <<= up->regshift;
+ __raw_writeb(value, up->membase + offset);
+}
+
static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
int value)
{
return __serial_read_reg(up, offset);
}
+static void serial_out_override(struct uart_port *up, int offset, int value)
+{
+ unsigned int status, tmout = 10000;
+
+ status = __serial_read_reg(up, UART_LSR);
+ while (!(status & UART_LSR_THRE)) {
+ /* Wait up to 10ms for the character(s) to be sent. */
+ if (--tmout == 0)
+ break;
+ udelay(1);
+ status = __serial_read_reg(up, UART_LSR);
+ }
+ __serial_write_reg(up, offset, value);
+}
void __init omap_serial_early_init(void)
{
int i;
* omap3xxx: Never read empty UART fifo on UARTs
* with IP rev >=0x52
*/
- if (cpu_is_omap44xx())
+ if (cpu_is_omap44xx()) {
uart->p->serial_in = serial_in_override;
- else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF)
- >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV)
+ uart->p->serial_out = serial_out_override;
+ } else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF)
+ >= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV) {
uart->p->serial_in = serial_in_override;
+ uart->p->serial_out = serial_out_override;
+ }
}
/**
#include "prm.h"
#include "sdrc.h"
+#define SDRC_SCRATCHPAD_SEM_V 0xfa00291c
+
#define PM_PREPWSTST_CORE_V OMAP34XX_PRM_REGADDR(CORE_MOD, \
OMAP3430_PM_PREPWSTST)
#define PM_PREPWSTST_CORE_P 0x48306AE8
#define SDRC_DLLA_STATUS_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
#define SDRC_DLLA_CTRL_V OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
+ .text
+/* Function to aquire the semaphore in scratchpad */
+ENTRY(lock_scratchpad_sem)
+ stmfd sp!, {lr} @ save registers on stack
+wait_sem:
+ mov r0,#1
+ ldr r1, sdrc_scratchpad_sem
+wait_loop:
+ ldr r2, [r1] @ load the lock value
+ cmp r2, r0 @ is the lock free ?
+ beq wait_loop @ not free...
+ swp r2, r0, [r1] @ semaphore free so lock it and proceed
+ cmp r2, r0 @ did we succeed ?
+ beq wait_sem @ no - try again
+ ldmfd sp!, {pc} @ restore regs and return
+sdrc_scratchpad_sem:
+ .word SDRC_SCRATCHPAD_SEM_V
+ENTRY(lock_scratchpad_sem_sz)
+ .word . - lock_scratchpad_sem
+
+ .text
+/* Function to release the scratchpad semaphore */
+ENTRY(unlock_scratchpad_sem)
+ stmfd sp!, {lr} @ save registers on stack
+ ldr r3, sdrc_scratchpad_sem
+ mov r2,#0
+ str r2,[r3]
+ ldmfd sp!, {pc} @ restore regs and return
+ENTRY(unlock_scratchpad_sem_sz)
+ .word . - unlock_scratchpad_sem
+
.text
/* Function call to get the restore pointer for resume from OFF */
ENTRY(get_restore_pointer)
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
+#ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE
+ /* Restore L2 aux control register */
+ @ set service ID for PPA
+ mov r0, #CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
+ mov r12, r0 @ copy service ID in r12
+ mov r1, #0 @ set task ID for ROM code in r1
+ mov r2, #4 @ set some flags in r2, r6
+ mov r6, #0xff
+ ldr r4, scratchpad_base
+ ldr r3, [r4, #0xBC]
+ adds r3, r3, #8 @ r3 points to parameters
+ mcr p15, 0, r0, c7, c10, 4 @ data write barrier
+ mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
+ .word 0xE1600071 @ call SMI monitor (smi #1)
+#endif
b logic_l1_restore
l2_inv_api_params:
.word 0x1, 0x00
ldr r0, [r3,#4]
mov r12, #0x3
.word 0xE1600070 @ Call SMI monitor (smieq)
+ ldr r4, scratchpad_base
+ ldr r3, [r4,#0xBC]
+ ldr r0, [r3,#12]
+ mov r12, #0x2
+ .word 0xE1600070 @ Call SMI monitor (smieq)
logic_l1_restore:
mov r1, #0
/* Invalidate all instruction caches to PoU
ldr r4, scratchpad_base
ldr r3, [r4,#0xBC]
- adds r3, r3, #8
+ adds r3, r3, #16
ldmia r3!, {r4-r6}
mov sp, r4
msr spsr_cxsf, r5
mov r8, r0 /* Store SDRAM address in r8 */
mrc p15, 0, r5, c1, c0, 1 @ Read Auxiliary Control Register
mov r4, #0x1 @ Number of parameters for restore call
- stmia r8!, {r4-r5}
+ stmia r8!, {r4-r5} @ Push parameters for restore call
+ mrc p15, 1, r5, c9, c0, 2 @ Read L2 AUX ctrl register
+ stmia r8!, {r4-r5} @ Push parameters for restore call
/* Check what that target sleep state is:stored in r1*/
/* 1 - Only L1 and logic lost */
/* 2 - Only L2 lost */
*/
void __cpuinit local_timer_setup(struct clock_event_device *evt)
{
- evt->irq = INT_44XX_LOCALTIMER_IRQ;
+ evt->irq = OMAP44XX_IRQ_LOCALTIMER;
twd_timer_setup(evt);
}
},
};
-static int clk_on;
-
-static int musb_set_clock(struct clk *clk, int state)
-{
- if (state) {
- if (clk_on > 0)
- return -ENODEV;
-
- clk_enable(clk);
- clk_on = 1;
- } else {
- if (clk_on == 0)
- return -ENODEV;
-
- clk_disable(clk);
- clk_on = 0;
- }
-
- return 0;
-}
-
-static struct musb_hdrc_eps_bits musb_eps[] = {
- { "ep1_tx", 10, },
- { "ep1_rx", 10, },
- { "ep2_tx", 9, },
- { "ep2_rx", 9, },
- { "ep3_tx", 3, },
- { "ep3_rx", 3, },
- { "ep4_tx", 3, },
- { "ep4_rx", 3, },
- { "ep5_tx", 3, },
- { "ep5_rx", 3, },
- { "ep6_tx", 3, },
- { "ep6_rx", 3, },
- { "ep7_tx", 3, },
- { "ep7_rx", 3, },
- { "ep8_tx", 2, },
- { "ep8_rx", 2, },
- { "ep9_tx", 2, },
- { "ep9_rx", 2, },
- { "ep10_tx", 2, },
- { "ep10_rx", 2, },
- { "ep11_tx", 2, },
- { "ep11_rx", 2, },
- { "ep12_tx", 2, },
- { "ep12_rx", 2, },
- { "ep13_tx", 2, },
- { "ep13_rx", 2, },
- { "ep14_tx", 2, },
- { "ep14_rx", 2, },
- { "ep15_tx", 2, },
- { "ep15_rx", 2, },
-};
-
static struct musb_hdrc_config musb_config = {
.multipoint = 1,
.dyn_fifo = 1,
- .soft_con = 1,
- .dma = 1,
.num_eps = 16,
- .dma_channels = 7,
- .dma_req_chan = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3),
.ram_bits = 12,
- .eps_bits = musb_eps,
};
static struct musb_hdrc_platform_data musb_plat = {
.mode = MUSB_PERIPHERAL,
#endif
/* .clock is set dynamically */
- .set_clock = musb_set_clock,
.config = &musb_config,
/* REVISIT charge pump on TWL4030 can supply up to
.resource = musb_resources,
};
-void __init usb_musb_init(void)
+void __init usb_musb_init(struct omap_musb_board_data *board_data)
{
- if (cpu_is_omap243x())
+ if (cpu_is_omap243x()) {
musb_resources[0].start = OMAP243X_HS_BASE;
- else
+ } else if (cpu_is_omap34xx()) {
musb_resources[0].start = OMAP34XX_HSUSB_OTG_BASE;
- musb_resources[0].end = musb_resources[0].start + SZ_8K - 1;
+ } else if (cpu_is_omap44xx()) {
+ musb_resources[0].start = OMAP44XX_HSUSB_OTG_BASE;
+ musb_resources[1].start = OMAP44XX_IRQ_HS_USB_MC_N;
+ musb_resources[2].start = OMAP44XX_IRQ_HS_USB_DMA_N;
+ }
+ musb_resources[0].end = musb_resources[0].start + SZ_4K - 1;
/*
* REVISIT: This line can be removed once all the platforms using
* musb_core.c have been converted to use use clkdev.
*/
musb_plat.clock = "ick";
+ musb_plat.board_data = board_data;
+ musb_plat.power = board_data->power >> 1;
+ musb_plat.mode = board_data->mode;
- if (platform_device_register(&musb_device) < 0) {
+ if (platform_device_register(&musb_device) < 0)
printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
- return;
- }
}
#else
-void __init usb_musb_init(void)
+void __init usb_musb_init(struct omap_musb_board_data *board_data)
{
}
#endif /* CONFIG_USB_MUSB_SOC */
endchoice
+config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
+ bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
+ depends on ARCH_OMAP3 && PM
+ default n
+ help
+ Without this option, L2 Auxiliary control register contents are
+ lost during off-mode entry on HS/EMU devices. This feature
+ requires support from PPA / boot-loader in HS/EMU devices, which
+ currently does not exist by default.
+
+config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
+ int "Service ID for the support routine to set L2 AUX control"
+ depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE
+ default 43
+ help
+ PPA routine service ID for setting L2 auxiliary control register.
+
config OMAP_32K_TIMER_HZ
int "Kernel internal timer frequency for 32KHz timer"
range 32 1024
static struct omap_globals omap242x_globals = {
.class = OMAP242X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(0x48014000),
- .sdrc = OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
- .sms = OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE),
- .ctrl = OMAP2_L4_IO_ADDRESS(OMAP2420_CTRL_BASE),
- .prm = OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE),
- .cm = OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE),
+ .sdrc = OMAP2420_SDRC_BASE,
+ .sms = OMAP2420_SMS_BASE,
+ .ctrl = OMAP2420_CTRL_BASE,
+ .prm = OMAP2420_PRM_BASE,
+ .cm = OMAP2420_CM_BASE,
.uart1_phys = OMAP2_UART1_BASE,
.uart2_phys = OMAP2_UART2_BASE,
.uart3_phys = OMAP2_UART3_BASE,
static struct omap_globals omap243x_globals = {
.class = OMAP243X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(0x4900a000),
- .sdrc = OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
- .sms = OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE),
- .ctrl = OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
- .prm = OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE),
- .cm = OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE),
+ .sdrc = OMAP243X_SDRC_BASE,
+ .sms = OMAP243X_SMS_BASE,
+ .ctrl = OMAP243X_CTRL_BASE,
+ .prm = OMAP2430_PRM_BASE,
+ .cm = OMAP2430_CM_BASE,
.uart1_phys = OMAP2_UART1_BASE,
.uart2_phys = OMAP2_UART2_BASE,
.uart3_phys = OMAP2_UART3_BASE,
static struct omap_globals omap3_globals = {
.class = OMAP343X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(0x4830A000),
- .sdrc = OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
- .sms = OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE),
- .ctrl = OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
- .prm = OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE),
- .cm = OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
+ .sdrc = OMAP343X_SDRC_BASE,
+ .sms = OMAP343X_SMS_BASE,
+ .ctrl = OMAP343X_CTRL_BASE,
+ .prm = OMAP3430_PRM_BASE,
+ .cm = OMAP3430_CM_BASE,
.uart1_phys = OMAP3_UART1_BASE,
.uart2_phys = OMAP3_UART2_BASE,
.uart3_phys = OMAP3_UART3_BASE,
static struct omap_globals omap4_globals = {
.class = OMAP443X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
- .ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE),
- .prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
- .cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
- .cm2 = OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE),
+ .ctrl = OMAP443X_CTRL_BASE,
+ .prm = OMAP4430_PRM_BASE,
+ .cm = OMAP4430_CM_BASE,
+ .cm2 = OMAP4430_CM2_BASE,
.uart1_phys = OMAP4_UART1_BASE,
.uart2_phys = OMAP4_UART2_BASE,
.uart3_phys = OMAP4_UART3_BASE,
},
{
.name = "mcpdm_irq",
- .start = INT_44XX_MCPDM_IRQ,
- .end = INT_44XX_MCPDM_IRQ,
+ .start = OMAP44XX_IRQ_MCPDM,
+ .end = OMAP44XX_IRQ_MCPDM,
.flags = IORESOURCE_IRQ,
},
};
if (cpu_class_is_omap2()) {
int irq;
if (cpu_is_omap44xx())
- irq = INT_44XX_SDMA_IRQ0;
+ irq = OMAP44XX_IRQ_SDMA_0;
else
irq = INT_24XX_SDMA_IRQ0;
setup_irq(irq, &omap24xx_dma_irq);
}
- if (cpu_is_omap34xx()) {
+ if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
/* Enable smartidle idlemodes and autoidle */
u32 v = dma_read(OCP_SYSCONFIG);
v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
DMA_SYSCONFIG_AUTOIDLE);
dma_write(v , OCP_SYSCONFIG);
/* reserve dma channels 0 and 1 in high security devices */
- if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
+ if (cpu_is_omap34xx() &&
+ (omap_type() != OMAP2_DEVICE_TYPE_GP)) {
printk(KERN_INFO "Reserving DMA channels 0 and 1 for "
"HS ROM code\n");
dma_chan[0].dev_id = 0;
#ifdef CONFIG_ARCH_OMAP4
static struct omap_dm_timer omap4_dm_timers[] = {
- { .phys_base = 0x4a318000, .irq = INT_44XX_GPTIMER1 },
- { .phys_base = 0x48032000, .irq = INT_44XX_GPTIMER2 },
- { .phys_base = 0x48034000, .irq = INT_44XX_GPTIMER3 },
- { .phys_base = 0x48036000, .irq = INT_44XX_GPTIMER4 },
- { .phys_base = 0x40138000, .irq = INT_44XX_GPTIMER5 },
- { .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER6 },
- { .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER7 },
- { .phys_base = 0x4013e000, .irq = INT_44XX_GPTIMER8 },
- { .phys_base = 0x4803e000, .irq = INT_44XX_GPTIMER9 },
- { .phys_base = 0x48086000, .irq = INT_44XX_GPTIMER10 },
- { .phys_base = 0x48088000, .irq = INT_44XX_GPTIMER11 },
- { .phys_base = 0x4a320000, .irq = INT_44XX_GPTIMER12 },
+ { .phys_base = 0x4a318000, .irq = OMAP44XX_IRQ_GPT1 },
+ { .phys_base = 0x48032000, .irq = OMAP44XX_IRQ_GPT2 },
+ { .phys_base = 0x48034000, .irq = OMAP44XX_IRQ_GPT3 },
+ { .phys_base = 0x48036000, .irq = OMAP44XX_IRQ_GPT4 },
+ { .phys_base = 0x40138000, .irq = OMAP44XX_IRQ_GPT5 },
+ { .phys_base = 0x4013a000, .irq = OMAP44XX_IRQ_GPT6 },
+ { .phys_base = 0x4013a000, .irq = OMAP44XX_IRQ_GPT7 },
+ { .phys_base = 0x4013e000, .irq = OMAP44XX_IRQ_GPT8 },
+ { .phys_base = 0x4803e000, .irq = OMAP44XX_IRQ_GPT9 },
+ { .phys_base = 0x48086000, .irq = OMAP44XX_IRQ_GPT10 },
+ { .phys_base = 0x48088000, .irq = OMAP44XX_IRQ_GPT11 },
+ { .phys_base = 0x4a320000, .irq = OMAP44XX_IRQ_GPT12 },
};
static const char *omap4_dm_source_names[] __initdata = {
"sys_ck",
#ifdef CONFIG_ARCH_OMAP4
static struct gpio_bank gpio_bank_44xx[6] = {
- { OMAP44XX_GPIO1_BASE, NULL, INT_44XX_GPIO_BANK1, IH_GPIO_BASE,
+ { OMAP44XX_GPIO1_BASE, NULL, OMAP44XX_IRQ_GPIO1, IH_GPIO_BASE,
METHOD_GPIO_44XX },
- { OMAP44XX_GPIO2_BASE, NULL, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32,
+ { OMAP44XX_GPIO2_BASE, NULL, OMAP44XX_IRQ_GPIO2, IH_GPIO_BASE + 32,
METHOD_GPIO_44XX },
- { OMAP44XX_GPIO3_BASE, NULL, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64,
+ { OMAP44XX_GPIO3_BASE, NULL, OMAP44XX_IRQ_GPIO3, IH_GPIO_BASE + 64,
METHOD_GPIO_44XX },
- { OMAP44XX_GPIO4_BASE, NULL, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96,
+ { OMAP44XX_GPIO4_BASE, NULL, OMAP44XX_IRQ_GPIO4, IH_GPIO_BASE + 96,
METHOD_GPIO_44XX },
- { OMAP44XX_GPIO5_BASE, NULL, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128,
+ { OMAP44XX_GPIO5_BASE, NULL, OMAP44XX_IRQ_GPIO5, IH_GPIO_BASE + 128,
METHOD_GPIO_44XX },
- { OMAP44XX_GPIO6_BASE, NULL, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160,
+ { OMAP44XX_GPIO6_BASE, NULL, OMAP44XX_IRQ_GPIO6, IH_GPIO_BASE + 160,
METHOD_GPIO_44XX },
};
extern void omap_map_common_io(void);
extern struct sys_timer omap_timer;
-/* IO bases for various OMAP processors */
+/*
+ * IO bases for various OMAP processors
+ * Except the tap base, rest all the io bases
+ * listed are physical addresses.
+ */
struct omap_globals {
u32 class; /* OMAP class to detect */
void __iomem *tap; /* Control module ID code */
- void __iomem *sdrc; /* SDRAM Controller */
- void __iomem *sms; /* SDRAM Memory Scheduler */
- void __iomem *ctrl; /* System Control Module */
- void __iomem *prm; /* Power and Reset Management */
- void __iomem *cm; /* Clock Management */
- void __iomem *cm2;
+ unsigned long sdrc; /* SDRAM Controller */
+ unsigned long sms; /* SDRAM Memory Scheduler */
+ unsigned long ctrl; /* System Control Module */
+ unsigned long prm; /* Power and Reset Management */
+ unsigned long cm; /* Clock Management */
+ unsigned long cm2;
unsigned long uart1_phys;
unsigned long uart2_phys;
unsigned long uart3_phys;
#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250
#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254
+/* 44xx control status register offset */
+#define OMAP44XX_CONTROL_STATUS 0x2c4
+
/*
* REVISIT: This list of registers is not comprehensive - there are more
* that should be added.
--- /dev/null
+/*
+ * OMAP4 SDMA channel definitions
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Santosh Shilimkar (santosh.shilimkar@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ * Paul Walmsley (paul@pwsan.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
+#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
+
+#define OMAP44XX_DMA_SYS_REQ0 2
+#define OMAP44XX_DMA_SYS_REQ1 3
+#define OMAP44XX_DMA_GPMC 4
+#define OMAP44XX_DMA_DSS_DISPC_REQ 6
+#define OMAP44XX_DMA_SYS_REQ2 7
+#define OMAP44XX_DMA_MCASP1_AXEVT 8
+#define OMAP44XX_DMA_ISS_REQ1 9
+#define OMAP44XX_DMA_ISS_REQ2 10
+#define OMAP44XX_DMA_MCASP1_AREVT 11
+#define OMAP44XX_DMA_ISS_REQ3 12
+#define OMAP44XX_DMA_ISS_REQ4 13
+#define OMAP44XX_DMA_DSS_RFBI_REQ 14
+#define OMAP44XX_DMA_SPI3_TX0 15
+#define OMAP44XX_DMA_SPI3_RX0 16
+#define OMAP44XX_DMA_MCBSP2_TX 17
+#define OMAP44XX_DMA_MCBSP2_RX 18
+#define OMAP44XX_DMA_MCBSP3_TX 19
+#define OMAP44XX_DMA_MCBSP3_RX 20
+#define OMAP44XX_DMA_C2C_SSCM_GPO0 21
+#define OMAP44XX_DMA_C2C_SSCM_GPO1 22
+#define OMAP44XX_DMA_SPI3_TX1 23
+#define OMAP44XX_DMA_SPI3_RX1 24
+#define OMAP44XX_DMA_I2C3_TX 25
+#define OMAP44XX_DMA_I2C3_RX 26
+#define OMAP44XX_DMA_I2C1_TX 27
+#define OMAP44XX_DMA_I2C1_RX 28
+#define OMAP44XX_DMA_I2C2_TX 29
+#define OMAP44XX_DMA_I2C2_RX 30
+#define OMAP44XX_DMA_MCBSP4_TX 31
+#define OMAP44XX_DMA_MCBSP4_RX 32
+#define OMAP44XX_DMA_MCBSP1_TX 33
+#define OMAP44XX_DMA_MCBSP1_RX 34
+#define OMAP44XX_DMA_SPI1_TX0 35
+#define OMAP44XX_DMA_SPI1_RX0 36
+#define OMAP44XX_DMA_SPI1_TX1 37
+#define OMAP44XX_DMA_SPI1_RX1 38
+#define OMAP44XX_DMA_SPI1_TX2 39
+#define OMAP44XX_DMA_SPI1_RX2 40
+#define OMAP44XX_DMA_SPI1_TX3 41
+#define OMAP44XX_DMA_SPI1_RX3 42
+#define OMAP44XX_DMA_SPI2_TX0 43
+#define OMAP44XX_DMA_SPI2_RX0 44
+#define OMAP44XX_DMA_SPI2_TX1 45
+#define OMAP44XX_DMA_SPI2_RX1 46
+#define OMAP44XX_DMA_MMC2_TX 47
+#define OMAP44XX_DMA_MMC2_RX 48
+#define OMAP44XX_DMA_UART1_TX 49
+#define OMAP44XX_DMA_UART1_RX 50
+#define OMAP44XX_DMA_UART2_TX 51
+#define OMAP44XX_DMA_UART2_RX 52
+#define OMAP44XX_DMA_UART3_TX 53
+#define OMAP44XX_DMA_UART3_RX 54
+#define OMAP44XX_DMA_UART4_TX 55
+#define OMAP44XX_DMA_UART4_RX 56
+#define OMAP44XX_DMA_MMC4_TX 57
+#define OMAP44XX_DMA_MMC4_RX 58
+#define OMAP44XX_DMA_MMC5_TX 59
+#define OMAP44XX_DMA_MMC5_RX 60
+#define OMAP44XX_DMA_MMC1_TX 61
+#define OMAP44XX_DMA_MMC1_RX 62
+#define OMAP44XX_DMA_SYS_REQ3 64
+#define OMAP44XX_DMA_MCPDM_UP 65
+#define OMAP44XX_DMA_MCPDM_DL 66
+#define OMAP44XX_DMA_DMIC_REQ 67
+#define OMAP44XX_DMA_C2C_SSCM_GPO2 68
+#define OMAP44XX_DMA_C2C_SSCM_GPO3 69
+#define OMAP44XX_DMA_SPI4_TX0 70
+#define OMAP44XX_DMA_SPI4_RX0 71
+#define OMAP44XX_DMA_DSS_DSI1_REQ0 72
+#define OMAP44XX_DMA_DSS_DSI1_REQ1 73
+#define OMAP44XX_DMA_DSS_DSI1_REQ2 74
+#define OMAP44XX_DMA_DSS_DSI1_REQ3 75
+#define OMAP44XX_DMA_DSS_HDMI_REQ 76
+#define OMAP44XX_DMA_MMC3_TX 77
+#define OMAP44XX_DMA_MMC3_RX 78
+#define OMAP44XX_DMA_USIM_TX 79
+#define OMAP44XX_DMA_USIM_RX 80
+#define OMAP44XX_DMA_DSS_DSI2_REQ0 81
+#define OMAP44XX_DMA_DSS_DSI2_REQ1 82
+#define OMAP44XX_DMA_DSS_DSI2_REQ2 83
+#define OMAP44XX_DMA_DSS_DSI2_REQ3 84
+#define OMAP44XX_DMA_SLIMBUS1_TX0 85
+#define OMAP44XX_DMA_SLIMBUS1_TX1 86
+#define OMAP44XX_DMA_SLIMBUS1_TX2 87
+#define OMAP44XX_DMA_SLIMBUS1_TX3 88
+#define OMAP44XX_DMA_SLIMBUS1_RX0 89
+#define OMAP44XX_DMA_SLIMBUS1_RX1 90
+#define OMAP44XX_DMA_SLIMBUS1_RX2 91
+#define OMAP44XX_DMA_SLIMBUS1_RX3 92
+#define OMAP44XX_DMA_SLIMBUS2_TX0 93
+#define OMAP44XX_DMA_SLIMBUS2_TX1 94
+#define OMAP44XX_DMA_SLIMBUS2_TX2 95
+#define OMAP44XX_DMA_SLIMBUS2_TX3 96
+#define OMAP44XX_DMA_SLIMBUS2_RX0 97
+#define OMAP44XX_DMA_SLIMBUS2_RX1 98
+#define OMAP44XX_DMA_SLIMBUS2_RX2 99
+#define OMAP44XX_DMA_SLIMBUS2_RX3 100
+#define OMAP44XX_DMA_ABE_REQ_0 101
+#define OMAP44XX_DMA_ABE_REQ_1 102
+#define OMAP44XX_DMA_ABE_REQ_2 103
+#define OMAP44XX_DMA_ABE_REQ_3 104
+#define OMAP44XX_DMA_ABE_REQ_4 105
+#define OMAP44XX_DMA_ABE_REQ_5 106
+#define OMAP44XX_DMA_ABE_REQ_6 107
+#define OMAP44XX_DMA_ABE_REQ_7 108
+#define OMAP44XX_DMA_AES1_P_CTX_IN_REQ 109
+#define OMAP44XX_DMA_AES1_P_DATA_IN_REQ 110
+#define OMAP44XX_DMA_AES1_P_DATA_OUT_REQ 111
+#define OMAP44XX_DMA_AES2_P_CTX_IN_REQ 112
+#define OMAP44XX_DMA_AES2_P_DATA_IN_REQ 113
+#define OMAP44XX_DMA_AES2_P_DATA_OUT_REQ 114
+#define OMAP44XX_DMA_DES_P_CTX_IN_REQ 115
+#define OMAP44XX_DMA_DES_P_DATA_IN_REQ 116
+#define OMAP44XX_DMA_DES_P_DATA_OUT_REQ 117
+#define OMAP44XX_DMA_SHA2_CTXIN_P 118
+#define OMAP44XX_DMA_SHA2_DIN_P 119
+#define OMAP44XX_DMA_SHA2_CTXOUT_P 120
+#define OMAP44XX_DMA_AES1_P_CONTEXT_OUT_REQ 121
+#define OMAP44XX_DMA_AES2_P_CONTEXT_OUT_REQ 122
+#define OMAP44XX_DMA_I2C4_TX 124
+#define OMAP44XX_DMA_I2C4_RX 125
+
+#endif
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H
+/* Move omap4 specific defines to dma-44xx.h */
+#include "dma-44xx.h"
+
/* Hardware registers for omap1 */
#define OMAP1_DMA_BASE (0xfffed800)
#define OMAP34XX_DMA_USIM_TX 79 /* S_DMA_78 */
#define OMAP34XX_DMA_USIM_RX 80 /* S_DMA_79 */
-/* DMA request lines for 44xx */
-#define OMAP44XX_DMA_DSS_DISPC_REQ 6 /* S_DMA_5 */
-#define OMAP44XX_DMA_SYS_REQ2 7 /* S_DMA_6 */
-#define OMAP44XX_DMA_ISS_REQ1 9 /* S_DMA_8 */
-#define OMAP44XX_DMA_ISS_REQ2 10 /* S_DMA_9 */
-#define OMAP44XX_DMA_ISS_REQ3 12 /* S_DMA_11 */
-#define OMAP44XX_DMA_ISS_REQ4 13 /* S_DMA_12 */
-#define OMAP44XX_DMA_DSS_RFBI_REQ 14 /* S_DMA_13 */
-#define OMAP44XX_DMA_SPI3_TX0 15 /* S_DMA_14 */
-#define OMAP44XX_DMA_SPI3_RX0 16 /* S_DMA_15 */
-#define OMAP44XX_DMA_MCBSP2_TX 17 /* S_DMA_16 */
-#define OMAP44XX_DMA_MCBSP2_RX 18 /* S_DMA_17 */
-#define OMAP44XX_DMA_MCBSP3_TX 19 /* S_DMA_18 */
-#define OMAP44XX_DMA_MCBSP3_RX 20 /* S_DMA_19 */
-#define OMAP44XX_DMA_SPI3_TX1 23 /* S_DMA_22 */
-#define OMAP44XX_DMA_SPI3_RX1 24 /* S_DMA_23 */
-#define OMAP44XX_DMA_I2C3_TX 25 /* S_DMA_24 */
-#define OMAP44XX_DMA_I2C3_RX 26 /* S_DMA_25 */
-#define OMAP44XX_DMA_I2C1_TX 27 /* S_DMA_26 */
-#define OMAP44XX_DMA_I2C1_RX 28 /* S_DMA_27 */
-#define OMAP44XX_DMA_I2C2_TX 29 /* S_DMA_28 */
-#define OMAP44XX_DMA_I2C2_RX 30 /* S_DMA_29 */
-#define OMAP44XX_DMA_MCBSP4_TX 31 /* S_DMA_30 */
-#define OMAP44XX_DMA_MCBSP4_RX 32 /* S_DMA_31 */
-#define OMAP44XX_DMA_MCBSP1_TX 33 /* S_DMA_32 */
-#define OMAP44XX_DMA_MCBSP1_RX 34 /* S_DMA_33 */
-#define OMAP44XX_DMA_SPI1_TX0 35 /* S_DMA_34 */
-#define OMAP44XX_DMA_SPI1_RX0 36 /* S_DMA_35 */
-#define OMAP44XX_DMA_SPI1_TX1 37 /* S_DMA_36 */
-#define OMAP44XX_DMA_SPI1_RX1 38 /* S_DMA_37 */
-#define OMAP44XX_DMA_SPI1_TX2 39 /* S_DMA_38 */
-#define OMAP44XX_DMA_SPI1_RX2 40 /* S_DMA_39 */
-#define OMAP44XX_DMA_SPI1_TX3 41 /* S_DMA_40 */
-#define OMAP44XX_DMA_SPI1_RX3 42 /* S_DMA_41 */
-#define OMAP44XX_DMA_SPI2_TX0 43 /* S_DMA_42 */
-#define OMAP44XX_DMA_SPI2_RX0 44 /* S_DMA_43 */
-#define OMAP44XX_DMA_SPI2_TX1 45 /* S_DMA_44 */
-#define OMAP44XX_DMA_SPI2_RX1 46 /* S_DMA_45 */
-#define OMAP44XX_DMA_MMC2_TX 47 /* S_DMA_46 */
-#define OMAP44XX_DMA_MMC2_RX 48 /* S_DMA_47 */
-#define OMAP44XX_DMA_UART1_TX 49 /* S_DMA_48 */
-#define OMAP44XX_DMA_UART1_RX 50 /* S_DMA_49 */
-#define OMAP44XX_DMA_UART2_TX 51 /* S_DMA_50 */
-#define OMAP44XX_DMA_UART2_RX 52 /* S_DMA_51 */
-#define OMAP44XX_DMA_UART3_TX 53 /* S_DMA_52 */
-#define OMAP44XX_DMA_UART3_RX 54 /* S_DMA_53 */
-#define OMAP44XX_DMA_UART4_TX 55 /* S_DMA_54 */
-#define OMAP44XX_DMA_UART4_RX 56 /* S_DMA_55 */
-#define OMAP44XX_DMA_MMC4_TX 57 /* S_DMA_56 */
-#define OMAP44XX_DMA_MMC4_RX 58 /* S_DMA_57 */
-#define OMAP44XX_DMA_MMC5_TX 59 /* S_DMA_58 */
-#define OMAP44XX_DMA_MMC5_RX 60 /* S_DMA_59 */
-#define OMAP44XX_DMA_MMC1_TX 61 /* S_DMA_60 */
-#define OMAP44XX_DMA_MMC1_RX 62 /* S_DMA_61 */
-#define OMAP44XX_DMA_SYS_REQ3 64 /* S_DMA_63 */
-#define OMAP44XX_DMA_MCPDM_UP 65 /* S_DMA_64 */
-#define OMAP44XX_DMA_MCPDM_DL 66 /* S_DMA_65 */
-#define OMAP44XX_DMA_SPI4_TX0 70 /* S_DMA_69 */
-#define OMAP44XX_DMA_SPI4_RX0 71 /* S_DMA_70 */
-#define OMAP44XX_DMA_DSS_DSI1_REQ0 72 /* S_DMA_71 */
-#define OMAP44XX_DMA_DSS_DSI1_REQ1 73 /* S_DMA_72 */
-#define OMAP44XX_DMA_DSS_DSI1_REQ2 74 /* S_DMA_73 */
-#define OMAP44XX_DMA_DSS_DSI1_REQ3 75 /* S_DMA_74 */
-#define OMAP44XX_DMA_DSS_HDMI_REQ 76 /* S_DMA_75 */
-#define OMAP44XX_DMA_MMC3_TX 77 /* S_DMA_76 */
-#define OMAP44XX_DMA_MMC3_RX 78 /* S_DMA_77 */
-#define OMAP44XX_DMA_USIM_TX 79 /* S_DMA_78 */
-#define OMAP44XX_DMA_USIM_RX 80 /* S_DMA_79 */
-#define OMAP44XX_DMA_DSS_DSI2_REQ0 81 /* S_DMA_80 */
-#define OMAP44XX_DMA_DSS_DSI2_REQ1 82 /* S_DMA_81 */
-#define OMAP44XX_DMA_DSS_DSI2_REQ2 83 /* S_DMA_82 */
-#define OMAP44XX_DMA_DSS_DSI2_REQ3 84 /* S_DMA_83 */
-#define OMAP44XX_DMA_ABE_REQ0 101 /* S_DMA_100 */
-#define OMAP44XX_DMA_ABE_REQ1 102 /* S_DMA_101 */
-#define OMAP44XX_DMA_ABE_REQ2 103 /* S_DMA_102 */
-#define OMAP44XX_DMA_ABE_REQ3 104 /* S_DMA_103 */
-#define OMAP44XX_DMA_ABE_REQ4 105 /* S_DMA_104 */
-#define OMAP44XX_DMA_ABE_REQ5 106 /* S_DMA_105 */
-#define OMAP44XX_DMA_ABE_REQ6 107 /* S_DMA_106 */
-#define OMAP44XX_DMA_ABE_REQ7 108 /* S_DMA_107 */
-#define OMAP44XX_DMA_I2C4_TX 124 /* S_DMA_123 */
-#define OMAP44XX_DMA_I2C4_RX 125 /* S_DMA_124 */
-
/*----------------------------------------------------------------------------*/
#define OMAP1_DMA_TOUT_IRQ (1 << 0)
* VPOM3430 was not working for Int controller
*/
-#define L4_WK_34XX_PHYS L4_WK_34XX_BASE /* 0x48300000 --> 0xfa300000 */
-#define L4_WK_34XX_VIRT (L4_WK_34XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_WK_34XX_SIZE SZ_1M
-
#define L4_PER_34XX_PHYS L4_PER_34XX_BASE
/* 0x49000000 --> 0xfb000000 */
#define L4_PER_34XX_VIRT (L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET)
#define L4_44XX_VIRT (L4_44XX_PHYS + OMAP2_L4_IO_OFFSET)
#define L4_44XX_SIZE SZ_4M
-
-#define L4_WK_44XX_PHYS L4_WK_44XX_BASE /* 0x4a300000 --> 0xfc300000 */
-#define L4_WK_44XX_VIRT (L4_WK_44XX_PHYS + OMAP2_L4_IO_OFFSET)
-#define L4_WK_44XX_SIZE SZ_1M
-
#define L4_PER_44XX_PHYS L4_PER_44XX_BASE
/* 0x48000000 --> 0xfa000000 */
#define L4_PER_44XX_VIRT (L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET)
--- /dev/null
+/*
+ * OMAP4 Interrupt lines definitions
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Santosh Shilimkar (santosh.shilimkar@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H
+#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H
+
+/* OMAP44XX IRQs numbers definitions */
+#define OMAP44XX_IRQ_LOCALTIMER 29
+#define OMAP44XX_IRQ_LOCALWDT 30
+
+#define OMAP44XX_IRQ_GIC_START 32
+
+#define OMAP44XX_IRQ_PL310 (0 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CTI0 (1 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CTI1 (2 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_ELM (4 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SYS_1N (7 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SECURITY_EVENTS (8 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_L3_DBG (9 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_L3_APP (10 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_PRCM (11 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SDMA_0 (12 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SDMA_1 (13 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SDMA_2 (14 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SDMA_3 (15 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCBSP4 (16 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCBSP1 (17 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SR_MCU (18 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SR_CORE (19 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPMC (20 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GFX (21 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCBSP2 (22 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCBSP3 (23 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_ISS_5 (24 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DSS_DISPC (25 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MAIL_U0 (26 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_C2C_SSCM_0 (27 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_TESLA_MMU (28 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO1 (29 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO2 (30 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO3 (31 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO4 (32 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO5 (33 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO6 (34 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_USIM (35 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_WDT3 (36 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT1 (37 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT2 (38 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT3 (39 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT4 (40 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT5 (41 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT6 (42 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT7 (43 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT8 (44 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT9 (45 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT10 (46 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT11 (47 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SPI4 (48 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SHA1_S (49 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_FPKA_SINTREQUEST_S (50 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SHA1_P (51 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_RNG (52 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DSS_DSI1 (53 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_I2C1 (56 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_I2C2 (57 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HDQ (58 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC5 (59 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_I2C3 (61 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_I2C4 (62 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_AES2_S (63 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_AES2_P (64 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SPI1 (65 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SPI2 (66 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HSI_P1 (67 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HSI_P2 (68 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_FDIF_3 (69 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UART4 (70 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HSI_DMA (71 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UART1 (72 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UART2 (73 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UART3 (74 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_PBIAS (75 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_OHCI (76 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_EHCI (77 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_TLL (78 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_AES1_S (79 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_WDT2 (80 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DES_S (81 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DES_P (82 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC1 (83 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DSS_DSI2 (84 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_AES1_P (85 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC2 (86 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MPU_ICR (87 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_C2C_SSCM_1 (88 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_FSUSB (89 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_FSUSB_SMI (90 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SPI3 (91 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HS_USB_MC_N (92 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HS_USB_DMA_N (93 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC3 (94 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT12 (95 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC4 (96 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SLIMBUS1 (97 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SLIMBUS2 (98 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_ABE (99 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DUCATI_MMU (100 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DSS_HDMI (101 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SR_IVA (102 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_1 (103 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_0 (104 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_IVA_HD_POMBINTRPEND_0 (107 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCASP1_AR (108 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCASP1_AX (109 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_EMIF4_1 (110 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_EMIF4_2 (111 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCPDM (112 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DMM (113 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DMIC (114 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CDMA_0 (115 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CDMA_1 (116 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CDMA_2 (117 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CDMA_3 (118 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SYS_2N (119 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_KBD_CTL (120 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UNIPRO1 (124 + OMAP44XX_IRQ_GIC_START)
+
+#endif
#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
#define __ASM_ARCH_OMAP15XX_IRQS_H
+/* All OMAP4 specific defines are moved to irqs-44xx.h */
+#include "irqs-44xx.h"
+
/*
* IRQ numbers for interrupt handler 1
*
#define INT_35XX_CCDC_VD1_IRQ 92
#define INT_35XX_CCDC_VD2_IRQ 93
-#define IRQ_GIC_START 32
-#define INT_44XX_LOCALTIMER_IRQ 29
-#define INT_44XX_LOCALWDT_IRQ 30
-
-#define INT_44XX_BENCH_MPU_EMUL (3 + IRQ_GIC_START)
-#define INT_44XX_SSM_ABORT_IRQ (6 + IRQ_GIC_START)
-#define INT_44XX_SYS_NIRQ (7 + IRQ_GIC_START)
-#define INT_44XX_D2D_FW_IRQ (8 + IRQ_GIC_START)
-#define INT_44XX_PRCM_MPU_IRQ (11 + IRQ_GIC_START)
-#define INT_44XX_SDMA_IRQ0 (12 + IRQ_GIC_START)
-#define INT_44XX_SDMA_IRQ1 (13 + IRQ_GIC_START)
-#define INT_44XX_SDMA_IRQ2 (14 + IRQ_GIC_START)
-#define INT_44XX_SDMA_IRQ3 (15 + IRQ_GIC_START)
-#define INT_44XX_ISS_IRQ (24 + IRQ_GIC_START)
-#define INT_44XX_DSS_IRQ (25 + IRQ_GIC_START)
-#define INT_44XX_MAIL_U0_MPU (26 + IRQ_GIC_START)
-#define INT_44XX_DSP_MMU (28 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER1 (37 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER2 (38 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER3 (39 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER4 (40 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER5 (41 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER6 (42 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER7 (43 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER8 (44 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER9 (45 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER10 (46 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER11 (47 + IRQ_GIC_START)
-#define INT_44XX_GPTIMER12 (95 + IRQ_GIC_START)
-#define INT_44XX_SHA1MD5 (51 + IRQ_GIC_START)
-#define INT_44XX_I2C1_IRQ (56 + IRQ_GIC_START)
-#define INT_44XX_I2C2_IRQ (57 + IRQ_GIC_START)
-#define INT_44XX_HDQ_IRQ (58 + IRQ_GIC_START)
-#define INT_44XX_SPI1_IRQ (65 + IRQ_GIC_START)
-#define INT_44XX_SPI2_IRQ (66 + IRQ_GIC_START)
-#define INT_44XX_HSI_1_IRQ0 (67 + IRQ_GIC_START)
-#define INT_44XX_HSI_2_IRQ1 (68 + IRQ_GIC_START)
-#define INT_44XX_HSI_1_DMAIRQ (71 + IRQ_GIC_START)
-#define INT_44XX_UART1_IRQ (72 + IRQ_GIC_START)
-#define INT_44XX_UART2_IRQ (73 + IRQ_GIC_START)
-#define INT_44XX_UART3_IRQ (74 + IRQ_GIC_START)
-#define INT_44XX_UART4_IRQ (70 + IRQ_GIC_START)
-#define INT_44XX_USB_IRQ_NISO (76 + IRQ_GIC_START)
-#define INT_44XX_USB_IRQ_ISO (77 + IRQ_GIC_START)
-#define INT_44XX_USB_IRQ_HGEN (78 + IRQ_GIC_START)
-#define INT_44XX_USB_IRQ_HSOF (79 + IRQ_GIC_START)
-#define INT_44XX_USB_IRQ_OTG (80 + IRQ_GIC_START)
-#define INT_44XX_MCBSP4_IRQ_TX (81 + IRQ_GIC_START)
-#define INT_44XX_MCBSP4_IRQ_RX (82 + IRQ_GIC_START)
-#define INT_44XX_MMC_IRQ (83 + IRQ_GIC_START)
-#define INT_44XX_MMC2_IRQ (86 + IRQ_GIC_START)
-#define INT_44XX_MCBSP2_IRQ_TX (89 + IRQ_GIC_START)
-#define INT_44XX_MCBSP2_IRQ_RX (90 + IRQ_GIC_START)
-#define INT_44XX_SPI3_IRQ (91 + IRQ_GIC_START)
-#define INT_44XX_SPI5_IRQ (69 + IRQ_GIC_START)
-
-#define INT_44XX_MCBSP5_IRQ (16 + IRQ_GIC_START)
-#define INT_44xX_MCBSP1_IRQ (17 + IRQ_GIC_START)
-#define INT_44XX_MCBSP2_IRQ (22 + IRQ_GIC_START)
-#define INT_44XX_MCBSP3_IRQ (23 + IRQ_GIC_START)
-#define INT_44XX_MCBSP4_IRQ (27 + IRQ_GIC_START)
-#define INT_44XX_HS_USB_MC (92 + IRQ_GIC_START)
-#define INT_44XX_HS_USB_DMA (93 + IRQ_GIC_START)
-
-#define INT_44XX_GPIO_BANK1 (29 + IRQ_GIC_START)
-#define INT_44XX_GPIO_BANK2 (30 + IRQ_GIC_START)
-#define INT_44XX_GPIO_BANK3 (31 + IRQ_GIC_START)
-#define INT_44XX_GPIO_BANK4 (32 + IRQ_GIC_START)
-#define INT_44XX_GPIO_BANK5 (33 + IRQ_GIC_START)
-#define INT_44XX_GPIO_BANK6 (34 + IRQ_GIC_START)
-#define INT_44XX_USIM_IRQ (35 + IRQ_GIC_START)
-#define INT_44XX_WDT3_IRQ (36 + IRQ_GIC_START)
-#define INT_44XX_SPI4_IRQ (48 + IRQ_GIC_START)
-#define INT_44XX_SHA1MD52_IRQ (49 + IRQ_GIC_START)
-#define INT_44XX_FPKA_READY_IRQ (50 + IRQ_GIC_START)
-#define INT_44XX_SHA1MD51_IRQ (51 + IRQ_GIC_START)
-#define INT_44XX_RNG_IRQ (52 + IRQ_GIC_START)
-#define INT_44XX_MMC5_IRQ (59 + IRQ_GIC_START)
-#define INT_44XX_I2C3_IRQ (61 + IRQ_GIC_START)
-#define INT_44XX_FPKA_ERROR_IRQ (64 + IRQ_GIC_START)
-#define INT_44XX_PBIAS_IRQ (75 + IRQ_GIC_START)
-#define INT_44XX_OHCI_IRQ (76 + IRQ_GIC_START)
-#define INT_44XX_EHCI_IRQ (77 + IRQ_GIC_START)
-#define INT_44XX_TLL_IRQ (78 + IRQ_GIC_START)
-#define INT_44XX_PARTHASH_IRQ (79 + IRQ_GIC_START)
-#define INT_44XX_MMC3_IRQ (94 + IRQ_GIC_START)
-#define INT_44XX_MMC4_IRQ (96 + IRQ_GIC_START)
-#define INT_44XX_MCPDM_IRQ (112 + IRQ_GIC_START)
-
/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
* 16 MPUIO lines */
#define OMAP_MAX_GPIO_LINES 192
#define OMAP34XX_MCBSP1_BASE 0x48074000
#define OMAP34XX_MCBSP2_BASE 0x49022000
+#define OMAP34XX_MCBSP2_ST_BASE 0x49028000
+#define OMAP34XX_MCBSP3_BASE 0x49024000
+#define OMAP34XX_MCBSP3_ST_BASE 0x4902A000
#define OMAP34XX_MCBSP3_BASE 0x49024000
#define OMAP34XX_MCBSP4_BASE 0x49026000
#define OMAP34XX_MCBSP5_BASE 0x48096000
#define OMAP_MCBSP_REG_WAKEUPEN 0xA8
#define OMAP_MCBSP_REG_XCCR 0xAC
#define OMAP_MCBSP_REG_RCCR 0xB0
+#define OMAP_MCBSP_REG_SSELCR 0xBC
+
+#define OMAP_ST_REG_REV 0x00
+#define OMAP_ST_REG_SYSCONFIG 0x10
+#define OMAP_ST_REG_IRQSTATUS 0x18
+#define OMAP_ST_REG_IRQENABLE 0x1C
+#define OMAP_ST_REG_SGAINCR 0x24
+#define OMAP_ST_REG_SFIRCR 0x28
+#define OMAP_ST_REG_SSELCR 0x2C
#define AUDIO_MCBSP_DATAWRITE (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DXR1)
#define AUDIO_MCBSP_DATAREAD (OMAP24XX_MCBSP2_BASE + OMAP_MCBSP_REG_DRR1)
#define ENAWAKEUP 0x0004
#define SOFTRST 0x0002
+/********************** McBSP SSELCR bit definitions ***********************/
+#define SIDETONEEN 0x0400
+
+/********************** McBSP Sidetone SYSCONFIG bit definitions ***********/
+#define ST_AUTOIDLE 0x0001
+
+/********************** McBSP Sidetone SGAINCR bit definitions *************/
+#define ST_CH1GAIN(value) ((value<<16)) /* Bits 16:31 */
+#define ST_CH0GAIN(value) (value) /* Bits 0:15 */
+
+/********************** McBSP Sidetone SFIRCR bit definitions **************/
+#define ST_FIRCOEFF(value) (value) /* Bits 0:15 */
+
+/********************** McBSP Sidetone SSELCR bit definitions **************/
+#define ST_COEFFWRDONE 0x0004
+#define ST_COEFFWREN 0x0002
+#define ST_SIDETONEEN 0x0001
+
/********************** McBSP DMA operating modes **************************/
#define MCBSP_DMA_MODE_ELEMENT 0
#define MCBSP_DMA_MODE_THRESHOLD 1
u16 rx_irq, tx_irq;
struct omap_mcbsp_ops *ops;
#ifdef CONFIG_ARCH_OMAP3
+ /* Sidetone block for McBSP 2 and 3 */
+ unsigned long phys_base_st;
u16 buffer_size;
#endif
};
+struct omap_mcbsp_st_data {
+ void __iomem *io_base_st;
+ bool running;
+ bool enabled;
+ s16 taps[128]; /* Sidetone filter coefficients */
+ int nr_taps; /* Number of filter coefficients in use */
+ s16 ch0gain;
+ s16 ch1gain;
+};
+
struct omap_mcbsp {
struct device *dev;
unsigned long phys_base;
struct clk *iclk;
struct clk *fclk;
#ifdef CONFIG_ARCH_OMAP3
+ struct omap_mcbsp_st_data *st_data;
int dma_op_mode;
u16 max_tx_thres;
u16 max_rx_thres;
int omap_mcbsp_pollwrite(unsigned int id, u16 buf);
int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type);
+#ifdef CONFIG_ARCH_OMAP3
+/* Sidetone specific API */
+int omap_st_set_chgain(unsigned int id, int channel, s16 chgain);
+int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain);
+int omap_st_enable(unsigned int id);
+int omap_st_disable(unsigned int id);
+int omap_st_is_enabled(unsigned int id);
+#else
+static inline int omap_st_set_chgain(unsigned int id, int channel,
+ s16 chgain) { return 0; }
+static inline int omap_st_get_chgain(unsigned int id, int channel,
+ s16 *chgain) { return 0; }
+static inline int omap_st_enable(unsigned int id) { return 0; }
+static inline int omap_st_disable(unsigned int id) { return 0; }
+static inline int omap_st_is_enabled(unsigned int id) { return 0; }
+#endif
+
#endif
#define OMAP44XX_MCPDM_L3_BASE 0x49032000
#define OMAP44XX_MAILBOX_BASE (L4_44XX_BASE + 0xF4000)
+#define OMAP44XX_HSUSB_OTG_BASE (L4_44XX_BASE + 0xAB000)
#endif /* __ASM_ARCH_OMAP44XX_H */
#ifndef __ASM_ARCH_OMAP_USB_H
#define __ASM_ARCH_OMAP_USB_H
+#include <linux/usb/musb.h>
#include <plat/board.h>
#define OMAP3_HS_USB_PORTS 3
#define UDC_BASE OMAP2_UDC_BASE
#define OMAP_OHCI_BASE OMAP2_OHCI_BASE
-extern void usb_musb_init(void);
+struct omap_musb_board_data {
+ u8 interface_type;
+ u8 mode;
+ u8 power;
+};
+
+enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
+
+extern void usb_musb_init(struct omap_musb_board_data *board_data);
extern void usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata);
return XLATE(p, L3_34XX_PHYS, L3_34XX_VIRT);
if (BETWEEN(p, L4_34XX_PHYS, L4_34XX_SIZE))
return XLATE(p, L4_34XX_PHYS, L4_34XX_VIRT);
- if (BETWEEN(p, L4_WK_34XX_PHYS, L4_WK_34XX_SIZE))
- return XLATE(p, L4_WK_34XX_PHYS, L4_WK_34XX_VIRT);
if (BETWEEN(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_SIZE))
return XLATE(p, OMAP34XX_GPMC_PHYS, OMAP34XX_GPMC_VIRT);
if (BETWEEN(p, OMAP343X_SMS_PHYS, OMAP343X_SMS_SIZE))
return XLATE(p, L3_44XX_PHYS, L3_44XX_VIRT);
if (BETWEEN(p, L4_44XX_PHYS, L4_44XX_SIZE))
return XLATE(p, L4_44XX_PHYS, L4_44XX_VIRT);
- if (BETWEEN(p, L4_WK_44XX_PHYS, L4_WK_44XX_SIZE))
- return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT);
if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE))
return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT);
if (BETWEEN(p, OMAP44XX_EMIF1_PHYS, OMAP44XX_EMIF1_SIZE))
#include <plat/mailbox.h>
+static struct workqueue_struct *mboxd;
static struct omap_mbox *mboxes;
static DEFINE_RWLOCK(mboxes_lock);
/* no more messages in the fifo. clear IRQ source. */
ack_mbox_irq(mbox, IRQ_RX);
nomem:
- schedule_work(&mbox->rxq->work);
+ queue_work(mboxd, &mbox->rxq->work);
}
static irqreturn_t mbox_interrupt(int irq, void *p)
static int __init omap_mbox_init(void)
{
+ mboxd = create_workqueue("mboxd");
+ if (!mboxd)
+ return -ENOMEM;
+
return 0;
}
module_init(omap_mbox_init);
static void __exit omap_mbox_exit(void)
{
+ destroy_workqueue(mboxd);
}
module_exit(omap_mbox_exit);
#include <plat/dma.h>
#include <plat/mcbsp.h>
+#include "../mach-omap2/cm-regbits-34xx.h"
+
struct omap_mcbsp **mcbsp_ptr;
int omap_mcbsp_count, omap_mcbsp_cache_size;
}
}
+#ifdef CONFIG_ARCH_OMAP3
+void omap_mcbsp_st_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val)
+{
+ __raw_writel(val, mcbsp->st_data->io_base_st + reg);
+}
+
+int omap_mcbsp_st_read(struct omap_mcbsp *mcbsp, u16 reg)
+{
+ return __raw_readl(mcbsp->st_data->io_base_st + reg);
+}
+#endif
+
#define MCBSP_READ(mcbsp, reg) \
omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 0)
#define MCBSP_WRITE(mcbsp, reg, val) \
#define omap_mcbsp_check_valid_id(id) (id < omap_mcbsp_count)
#define id_to_mcbsp_ptr(id) mcbsp_ptr[id];
+#define MCBSP_ST_READ(mcbsp, reg) \
+ omap_mcbsp_st_read(mcbsp, OMAP_ST_REG_##reg)
+#define MCBSP_ST_WRITE(mcbsp, reg, val) \
+ omap_mcbsp_st_write(mcbsp, OMAP_ST_REG_##reg, val)
+
static void omap_mcbsp_dump_reg(u8 id)
{
struct omap_mcbsp *mcbsp = id_to_mcbsp_ptr(id);
EXPORT_SYMBOL(omap_mcbsp_config);
#ifdef CONFIG_ARCH_OMAP3
+static void omap_st_on(struct omap_mcbsp *mcbsp)
+{
+ unsigned int w;
+
+ /*
+ * Sidetone uses McBSP ICLK - which must not idle when sidetones
+ * are enabled or sidetones start sounding ugly.
+ */
+ w = cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
+ w &= ~(1 << (mcbsp->id - 2));
+ cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
+
+ /* Enable McBSP Sidetone */
+ w = MCBSP_READ(mcbsp, SSELCR);
+ MCBSP_WRITE(mcbsp, SSELCR, w | SIDETONEEN);
+
+ w = MCBSP_ST_READ(mcbsp, SYSCONFIG);
+ MCBSP_ST_WRITE(mcbsp, SYSCONFIG, w & ~(ST_AUTOIDLE));
+
+ /* Enable Sidetone from Sidetone Core */
+ w = MCBSP_ST_READ(mcbsp, SSELCR);
+ MCBSP_ST_WRITE(mcbsp, SSELCR, w | ST_SIDETONEEN);
+}
+
+static void omap_st_off(struct omap_mcbsp *mcbsp)
+{
+ unsigned int w;
+
+ w = MCBSP_ST_READ(mcbsp, SSELCR);
+ MCBSP_ST_WRITE(mcbsp, SSELCR, w & ~(ST_SIDETONEEN));
+
+ w = MCBSP_ST_READ(mcbsp, SYSCONFIG);
+ MCBSP_ST_WRITE(mcbsp, SYSCONFIG, w | ST_AUTOIDLE);
+
+ w = MCBSP_READ(mcbsp, SSELCR);
+ MCBSP_WRITE(mcbsp, SSELCR, w & ~(SIDETONEEN));
+
+ w = cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
+ w |= 1 << (mcbsp->id - 2);
+ cm_write_mod_reg(w, OMAP3430_PER_MOD, CM_AUTOIDLE);
+}
+
+static void omap_st_fir_write(struct omap_mcbsp *mcbsp, s16 *fir)
+{
+ u16 val, i;
+
+ val = MCBSP_ST_READ(mcbsp, SYSCONFIG);
+ MCBSP_ST_WRITE(mcbsp, SYSCONFIG, val & ~(ST_AUTOIDLE));
+
+ val = MCBSP_ST_READ(mcbsp, SSELCR);
+
+ if (val & ST_COEFFWREN)
+ MCBSP_ST_WRITE(mcbsp, SSELCR, val & ~(ST_COEFFWREN));
+
+ MCBSP_ST_WRITE(mcbsp, SSELCR, val | ST_COEFFWREN);
+
+ for (i = 0; i < 128; i++)
+ MCBSP_ST_WRITE(mcbsp, SFIRCR, fir[i]);
+
+ i = 0;
+
+ val = MCBSP_ST_READ(mcbsp, SSELCR);
+ while (!(val & ST_COEFFWRDONE) && (++i < 1000))
+ val = MCBSP_ST_READ(mcbsp, SSELCR);
+
+ MCBSP_ST_WRITE(mcbsp, SSELCR, val & ~(ST_COEFFWREN));
+
+ if (i == 1000)
+ dev_err(mcbsp->dev, "McBSP FIR load error!\n");
+}
+
+static void omap_st_chgain(struct omap_mcbsp *mcbsp)
+{
+ u16 w;
+ struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
+
+ w = MCBSP_ST_READ(mcbsp, SYSCONFIG);
+ MCBSP_ST_WRITE(mcbsp, SYSCONFIG, w & ~(ST_AUTOIDLE));
+
+ w = MCBSP_ST_READ(mcbsp, SSELCR);
+
+ MCBSP_ST_WRITE(mcbsp, SGAINCR, ST_CH0GAIN(st_data->ch0gain) | \
+ ST_CH1GAIN(st_data->ch1gain));
+}
+
+int omap_st_set_chgain(unsigned int id, int channel, s16 chgain)
+{
+ struct omap_mcbsp *mcbsp;
+ struct omap_mcbsp_st_data *st_data;
+ int ret = 0;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+
+ mcbsp = id_to_mcbsp_ptr(id);
+ st_data = mcbsp->st_data;
+
+ if (!st_data)
+ return -ENOENT;
+
+ spin_lock_irq(&mcbsp->lock);
+ if (channel == 0)
+ st_data->ch0gain = chgain;
+ else if (channel == 1)
+ st_data->ch1gain = chgain;
+ else
+ ret = -EINVAL;
+
+ if (st_data->enabled)
+ omap_st_chgain(mcbsp);
+ spin_unlock_irq(&mcbsp->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(omap_st_set_chgain);
+
+int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain)
+{
+ struct omap_mcbsp *mcbsp;
+ struct omap_mcbsp_st_data *st_data;
+ int ret = 0;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+
+ mcbsp = id_to_mcbsp_ptr(id);
+ st_data = mcbsp->st_data;
+
+ if (!st_data)
+ return -ENOENT;
+
+ spin_lock_irq(&mcbsp->lock);
+ if (channel == 0)
+ *chgain = st_data->ch0gain;
+ else if (channel == 1)
+ *chgain = st_data->ch1gain;
+ else
+ ret = -EINVAL;
+ spin_unlock_irq(&mcbsp->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(omap_st_get_chgain);
+
+static int omap_st_start(struct omap_mcbsp *mcbsp)
+{
+ struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
+
+ if (st_data && st_data->enabled && !st_data->running) {
+ omap_st_fir_write(mcbsp, st_data->taps);
+ omap_st_chgain(mcbsp);
+
+ if (!mcbsp->free) {
+ omap_st_on(mcbsp);
+ st_data->running = 1;
+ }
+ }
+
+ return 0;
+}
+
+int omap_st_enable(unsigned int id)
+{
+ struct omap_mcbsp *mcbsp;
+ struct omap_mcbsp_st_data *st_data;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+
+ mcbsp = id_to_mcbsp_ptr(id);
+ st_data = mcbsp->st_data;
+
+ if (!st_data)
+ return -ENODEV;
+
+ spin_lock_irq(&mcbsp->lock);
+ st_data->enabled = 1;
+ omap_st_start(mcbsp);
+ spin_unlock_irq(&mcbsp->lock);
+
+ return 0;
+}
+EXPORT_SYMBOL(omap_st_enable);
+
+static int omap_st_stop(struct omap_mcbsp *mcbsp)
+{
+ struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
+
+ if (st_data && st_data->running) {
+ if (!mcbsp->free) {
+ omap_st_off(mcbsp);
+ st_data->running = 0;
+ }
+ }
+
+ return 0;
+}
+
+int omap_st_disable(unsigned int id)
+{
+ struct omap_mcbsp *mcbsp;
+ struct omap_mcbsp_st_data *st_data;
+ int ret = 0;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+
+ mcbsp = id_to_mcbsp_ptr(id);
+ st_data = mcbsp->st_data;
+
+ if (!st_data)
+ return -ENODEV;
+
+ spin_lock_irq(&mcbsp->lock);
+ omap_st_stop(mcbsp);
+ st_data->enabled = 0;
+ spin_unlock_irq(&mcbsp->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL(omap_st_disable);
+
+int omap_st_is_enabled(unsigned int id)
+{
+ struct omap_mcbsp *mcbsp;
+ struct omap_mcbsp_st_data *st_data;
+
+ if (!omap_mcbsp_check_valid_id(id)) {
+ printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1);
+ return -ENODEV;
+ }
+
+ mcbsp = id_to_mcbsp_ptr(id);
+ st_data = mcbsp->st_data;
+
+ if (!st_data)
+ return -ENODEV;
+
+
+ return st_data->enabled;
+}
+EXPORT_SYMBOL(omap_st_is_enabled);
+
/*
* omap_mcbsp_set_tx_threshold configures how to deal
* with transmit threshold. the threshold value and handler can be
#else
static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp) {}
static inline void omap34xx_mcbsp_free(struct omap_mcbsp *mcbsp) {}
+static inline void omap_st_start(struct omap_mcbsp *mcbsp) {}
+static inline void omap_st_stop(struct omap_mcbsp *mcbsp) {}
#endif
/*
}
mcbsp = id_to_mcbsp_ptr(id);
+ if (cpu_is_omap34xx())
+ omap_st_start(mcbsp);
+
mcbsp->rx_word_length = (MCBSP_READ_CACHE(mcbsp, RCR1) >> 5) & 0x7;
mcbsp->tx_word_length = (MCBSP_READ_CACHE(mcbsp, XCR1) >> 5) & 0x7;
w = MCBSP_READ_CACHE(mcbsp, SPCR2);
MCBSP_WRITE(mcbsp, SPCR2, w & ~(1 << 6));
}
+
+ if (cpu_is_omap34xx())
+ omap_st_stop(mcbsp);
}
EXPORT_SYMBOL(omap_mcbsp_stop);
static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store);
+static ssize_t st_taps_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+ struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
+ ssize_t status = 0;
+ int i;
+
+ spin_lock_irq(&mcbsp->lock);
+ for (i = 0; i < st_data->nr_taps; i++)
+ status += sprintf(&buf[status], (i ? ", %d" : "%d"),
+ st_data->taps[i]);
+ if (i)
+ status += sprintf(&buf[status], "\n");
+ spin_unlock_irq(&mcbsp->lock);
+
+ return status;
+}
+
+static ssize_t st_taps_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct omap_mcbsp *mcbsp = dev_get_drvdata(dev);
+ struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
+ int val, tmp, status, i = 0;
+
+ spin_lock_irq(&mcbsp->lock);
+ memset(st_data->taps, 0, sizeof(st_data->taps));
+ st_data->nr_taps = 0;
+
+ do {
+ status = sscanf(buf, "%d%n", &val, &tmp);
+ if (status < 0 || status == 0) {
+ size = -EINVAL;
+ goto out;
+ }
+ if (val < -32768 || val > 32767) {
+ size = -EINVAL;
+ goto out;
+ }
+ st_data->taps[i++] = val;
+ buf += tmp;
+ if (*buf != ',')
+ break;
+ buf++;
+ } while (1);
+
+ st_data->nr_taps = i;
+
+out:
+ spin_unlock_irq(&mcbsp->lock);
+
+ return size;
+}
+
+static DEVICE_ATTR(st_taps, 0644, st_taps_show, st_taps_store);
+
static const struct attribute *additional_attrs[] = {
&dev_attr_max_tx_thres.attr,
&dev_attr_max_rx_thres.attr,
sysfs_remove_group(&dev->kobj, &additional_attr_group);
}
+static const struct attribute *sidetone_attrs[] = {
+ &dev_attr_st_taps.attr,
+ NULL,
+};
+
+static const struct attribute_group sidetone_attr_group = {
+ .attrs = (struct attribute **)sidetone_attrs,
+};
+
+int __devinit omap_st_add(struct omap_mcbsp *mcbsp)
+{
+ struct omap_mcbsp_platform_data *pdata = mcbsp->pdata;
+ struct omap_mcbsp_st_data *st_data;
+ int err;
+
+ st_data = kzalloc(sizeof(*mcbsp->st_data), GFP_KERNEL);
+ if (!st_data) {
+ err = -ENOMEM;
+ goto err1;
+ }
+
+ st_data->io_base_st = ioremap(pdata->phys_base_st, SZ_4K);
+ if (!st_data->io_base_st) {
+ err = -ENOMEM;
+ goto err2;
+ }
+
+ err = sysfs_create_group(&mcbsp->dev->kobj, &sidetone_attr_group);
+ if (err)
+ goto err3;
+
+ mcbsp->st_data = st_data;
+ return 0;
+
+err3:
+ iounmap(st_data->io_base_st);
+err2:
+ kfree(st_data);
+err1:
+ return err;
+
+}
+
+static void __devexit omap_st_remove(struct omap_mcbsp *mcbsp)
+{
+ struct omap_mcbsp_st_data *st_data = mcbsp->st_data;
+
+ if (st_data) {
+ sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group);
+ iounmap(st_data->io_base_st);
+ kfree(st_data);
+ }
+}
+
static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp)
{
mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT;
if (omap_additional_add(mcbsp->dev))
dev_warn(mcbsp->dev,
"Unable to create additional controls\n");
+
+ if (mcbsp->id == 2 || mcbsp->id == 3)
+ if (omap_st_add(mcbsp))
+ dev_warn(mcbsp->dev,
+ "Unable to create sidetone controls\n");
+
} else {
mcbsp->max_tx_thres = -EINVAL;
mcbsp->max_rx_thres = -EINVAL;
static inline void __devexit omap34xx_device_exit(struct omap_mcbsp *mcbsp)
{
- if (cpu_is_omap34xx())
+ if (cpu_is_omap34xx()) {
omap_additional_remove(mcbsp->dev);
+
+ if (mcbsp->id == 2 || mcbsp->id == 3)
+ omap_st_remove(mcbsp);
+ }
}
#else
static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) {}
/* MUSB configuration-specific details */
struct musb_hdrc_config *config;
+
+ /* Architecture specific board data */
+ void *board_data;
};
/* for board-specific init logic */
extern int otg_set_transceiver(struct otg_transceiver *);
+#if defined(CONFIG_NOP_USB_XCEIV) || defined(CONFIG_NOP_USB_XCEIV_MODULE)
/* sometimes transceivers are accessed only through e.g. ULPI */
extern void usb_nop_xceiv_register(void);
extern void usb_nop_xceiv_unregister(void);
+#else
+static inline void usb_nop_xceiv_register(void)
+{
+}
+
+static inline void usb_nop_xceiv_unregister(void)
+{
+}
+#endif
/* helpers for direct access thru low-level io interface */
static inline int otg_io_read(struct otg_transceiver *otg, u32 reg)
#define OMAP_MCBSP_RATES (SNDRV_PCM_RATE_8000_96000)
+#define OMAP_MCBSP_SOC_SINGLE_S16_EXT(xname, xmin, xmax, \
+ xhandler_get, xhandler_put) \
+{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
+ .info = omap_mcbsp_st_info_volsw, \
+ .get = xhandler_get, .put = xhandler_put, \
+ .private_value = (unsigned long) &(struct soc_mixer_control) \
+ {.min = xmin, .max = xmax} }
+
struct omap_mcbsp_data {
unsigned int bus_id;
struct omap_mcbsp_reg_cfg regs;
EXPORT_SYMBOL_GPL(omap_mcbsp_dai);
+int omap_mcbsp_st_info_volsw(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ int max = mc->max;
+ int min = mc->min;
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 1;
+ uinfo->value.integer.min = min;
+ uinfo->value.integer.max = max;
+ return 0;
+}
+
+#define OMAP_MCBSP_ST_SET_CHANNEL_VOLUME(id, channel) \
+static int \
+omap_mcbsp##id##_set_st_ch##channel##_volume(struct snd_kcontrol *kc, \
+ struct snd_ctl_elem_value *uc) \
+{ \
+ struct soc_mixer_control *mc = \
+ (struct soc_mixer_control *)kc->private_value; \
+ int max = mc->max; \
+ int min = mc->min; \
+ int val = uc->value.integer.value[0]; \
+ \
+ if (val < min || val > max) \
+ return -EINVAL; \
+ \
+ /* OMAP McBSP implementation uses index values 0..4 */ \
+ return omap_st_set_chgain((id)-1, channel, val); \
+}
+
+#define OMAP_MCBSP_ST_GET_CHANNEL_VOLUME(id, channel) \
+static int \
+omap_mcbsp##id##_get_st_ch##channel##_volume(struct snd_kcontrol *kc, \
+ struct snd_ctl_elem_value *uc) \
+{ \
+ s16 chgain; \
+ \
+ if (omap_st_get_chgain((id)-1, channel, &chgain)) \
+ return -EAGAIN; \
+ \
+ uc->value.integer.value[0] = chgain; \
+ return 0; \
+}
+
+OMAP_MCBSP_ST_SET_CHANNEL_VOLUME(2, 0)
+OMAP_MCBSP_ST_SET_CHANNEL_VOLUME(2, 1)
+OMAP_MCBSP_ST_SET_CHANNEL_VOLUME(3, 0)
+OMAP_MCBSP_ST_SET_CHANNEL_VOLUME(3, 1)
+OMAP_MCBSP_ST_GET_CHANNEL_VOLUME(2, 0)
+OMAP_MCBSP_ST_GET_CHANNEL_VOLUME(2, 1)
+OMAP_MCBSP_ST_GET_CHANNEL_VOLUME(3, 0)
+OMAP_MCBSP_ST_GET_CHANNEL_VOLUME(3, 1)
+
+static int omap_mcbsp_st_put_mode(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ u8 value = ucontrol->value.integer.value[0];
+
+ if (value == omap_st_is_enabled(mc->reg))
+ return 0;
+
+ if (value)
+ omap_st_enable(mc->reg);
+ else
+ omap_st_disable(mc->reg);
+
+ return 1;
+}
+
+static int omap_mcbsp_st_get_mode(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+
+ ucontrol->value.integer.value[0] = omap_st_is_enabled(mc->reg);
+ return 0;
+}
+
+static const struct snd_kcontrol_new omap_mcbsp2_st_controls[] = {
+ SOC_SINGLE_EXT("McBSP2 Sidetone Switch", 1, 0, 1, 0,
+ omap_mcbsp_st_get_mode, omap_mcbsp_st_put_mode),
+ OMAP_MCBSP_SOC_SINGLE_S16_EXT("McBSP2 Sidetone Channel 0 Volume",
+ -32768, 32767,
+ omap_mcbsp2_get_st_ch0_volume,
+ omap_mcbsp2_set_st_ch0_volume),
+ OMAP_MCBSP_SOC_SINGLE_S16_EXT("McBSP2 Sidetone Channel 1 Volume",
+ -32768, 32767,
+ omap_mcbsp2_get_st_ch1_volume,
+ omap_mcbsp2_set_st_ch1_volume),
+};
+
+static const struct snd_kcontrol_new omap_mcbsp3_st_controls[] = {
+ SOC_SINGLE_EXT("McBSP3 Sidetone Switch", 2, 0, 1, 0,
+ omap_mcbsp_st_get_mode, omap_mcbsp_st_put_mode),
+ OMAP_MCBSP_SOC_SINGLE_S16_EXT("McBSP3 Sidetone Channel 0 Volume",
+ -32768, 32767,
+ omap_mcbsp3_get_st_ch0_volume,
+ omap_mcbsp3_set_st_ch0_volume),
+ OMAP_MCBSP_SOC_SINGLE_S16_EXT("McBSP3 Sidetone Channel 1 Volume",
+ -32768, 32767,
+ omap_mcbsp3_get_st_ch1_volume,
+ omap_mcbsp3_set_st_ch1_volume),
+};
+
+int omap_mcbsp_st_add_controls(struct snd_soc_codec *codec, int mcbsp_id)
+{
+ if (!cpu_is_omap34xx())
+ return -ENODEV;
+
+ switch (mcbsp_id) {
+ case 1: /* McBSP 2 */
+ return snd_soc_add_controls(codec, omap_mcbsp2_st_controls,
+ ARRAY_SIZE(omap_mcbsp2_st_controls));
+ case 2: /* McBSP 3 */
+ return snd_soc_add_controls(codec, omap_mcbsp3_st_controls,
+ ARRAY_SIZE(omap_mcbsp3_st_controls));
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(omap_mcbsp_st_add_controls);
+
static int __init snd_omap_mcbsp_init(void)
{
return snd_soc_register_dais(omap_mcbsp_dai,
extern struct snd_soc_dai omap_mcbsp_dai[NUM_LINKS];
+int omap_mcbsp_st_add_controls(struct snd_soc_codec *codec, int mcbsp_id);
+
#endif
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff