obj-y += irq_pyxis.o irq_i8259.o irq_srm.o
obj-y += err_ev6.o
-obj-y += es1888.o smc37c669.o smc37c93x.o ns87312.o gct.o
+obj-y += es1888.o smc37c669.o smc37c93x.o pc873xx.o gct.o
obj-y += srmcons.o
else
# Board support
obj-$(CONFIG_ALPHA_ALCOR) += sys_alcor.o irq_i8259.o irq_srm.o
obj-$(CONFIG_ALPHA_CABRIOLET) += sys_cabriolet.o irq_i8259.o irq_srm.o \
- ns87312.o
+ pc873xx.o
obj-$(CONFIG_ALPHA_EB164) += sys_cabriolet.o irq_i8259.o irq_srm.o \
- ns87312.o
+ pc873xx.o
obj-$(CONFIG_ALPHA_EB66P) += sys_cabriolet.o irq_i8259.o irq_srm.o \
- ns87312.o
+ pc873xx.o
obj-$(CONFIG_ALPHA_LX164) += sys_cabriolet.o irq_i8259.o irq_srm.o \
smc37c93x.o
obj-$(CONFIG_ALPHA_PC164) += sys_cabriolet.o irq_i8259.o irq_srm.o \
obj-$(CONFIG_ALPHA_RX164) += sys_rx164.o irq_i8259.o
obj-$(CONFIG_ALPHA_SABLE) += sys_sable.o
obj-$(CONFIG_ALPHA_LYNX) += sys_sable.o
-obj-$(CONFIG_ALPHA_BOOK1) += sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_AVANTI) += sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_NONAME) += sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_P2K) += sys_sio.o irq_i8259.o irq_srm.o ns87312.o
-obj-$(CONFIG_ALPHA_XL) += sys_sio.o irq_i8259.o irq_srm.o ns87312.o
+obj-$(CONFIG_ALPHA_BOOK1) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_AVANTI) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_NONAME) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_P2K) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
+obj-$(CONFIG_ALPHA_XL) += sys_sio.o irq_i8259.o irq_srm.o pc873xx.o
obj-$(CONFIG_ALPHA_SX164) += sys_sx164.o irq_pyxis.o irq_i8259.o \
irq_srm.o smc37c669.o
-obj-$(CONFIG_ALPHA_TAKARA) += sys_takara.o irq_i8259.o ns87312.o
+obj-$(CONFIG_ALPHA_TAKARA) += sys_takara.o irq_i8259.o pc873xx.o
obj-$(CONFIG_ALPHA_WILDFIRE) += sys_wildfire.o irq_i8259.o
# Error support
+++ /dev/null
-/*
- * linux/arch/alpha/kernel/ns87312.c
- */
-
-#include <linux/init.h>
-#include <asm/io.h>
-#include "proto.h"
-
-
-/*
- * The SRM console *disables* the IDE interface, this code ensures it's
- * enabled.
- *
- * This code bangs on a control register of the 87312 Super I/O chip
- * that implements parallel port/serial ports/IDE/FDI. Depending on
- * the motherboard, the Super I/O chip can be configured through a
- * pair of registers that are located either at I/O ports 0x26e/0x26f
- * or 0x398/0x399. Unfortunately, autodetecting which base address is
- * in use works only once (right after a reset). The Super I/O chip
- * has the additional quirk that configuration register data must be
- * written twice (I believe this is a safety feature to prevent
- * accidental modification---fun, isn't it?).
- */
-
-void __init
-ns87312_enable_ide(long ide_base)
-{
- int data;
- unsigned long flags;
-
- local_irq_save(flags);
- outb(0, ide_base); /* set the index register for reg #0 */
- data = inb(ide_base+1); /* read the current contents */
- outb(0, ide_base); /* set the index register for reg #0 */
- outb(data | 0x40, ide_base+1); /* turn on IDE */
- outb(data | 0x40, ide_base+1); /* turn on IDE, really! */
- local_irq_restore(flags);
-}
--- /dev/null
+#include <linux/ioport.h>
+#include <asm/io.h>
+
+#include "pc873xx.h"
+
+static unsigned pc873xx_probelist[] = {0x398, 0x26e, 0};
+
+static char *pc873xx_names[] = {
+ "PC87303", "PC87306", "PC87312", "PC87332", "PC87334"
+};
+
+static unsigned int base, model;
+
+
+unsigned int __init pc873xx_get_base()
+{
+ return base;
+}
+
+char *__init pc873xx_get_model()
+{
+ return pc873xx_names[model];
+}
+
+static unsigned char __init pc873xx_read(unsigned int base, int reg)
+{
+ outb(reg, base);
+ return inb(base + 1);
+}
+
+static void __init pc873xx_write(unsigned int base, int reg, unsigned char data)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ outb(reg, base);
+ outb(data, base + 1);
+ outb(data, base + 1); /* Must be written twice */
+ local_irq_restore(flags);
+}
+
+int __init pc873xx_probe(void)
+{
+ int val, index = 0;
+
+ while ((base = pc873xx_probelist[index++])) {
+
+ if (request_region(base, 2, "Super IO PC873xx") == NULL)
+ continue;
+
+ val = pc873xx_read(base, REG_SID);
+ if ((val & 0xf0) == 0x10) {
+ model = PC87332;
+ break;
+ } else if ((val & 0xf8) == 0x70) {
+ model = PC87306;
+ break;
+ } else if ((val & 0xf8) == 0x50) {
+ model = PC87334;
+ break;
+ } else if ((val & 0xf8) == 0x40) {
+ model = PC87303;
+ break;
+ }
+
+ release_region(base, 2);
+ }
+
+ return (base == 0) ? -1 : 1;
+}
+
+void __init pc873xx_enable_epp19(void)
+{
+ unsigned char data;
+
+ printk(KERN_INFO "PC873xx enabling EPP v1.9\n");
+ data = pc873xx_read(base, REG_PCR);
+ pc873xx_write(base, REG_PCR, (data & 0xFC) | 0x02);
+}
+
+void __init pc873xx_enable_ide(void)
+{
+ unsigned char data;
+
+ printk(KERN_INFO "PC873xx enabling IDE interrupt\n");
+ data = pc873xx_read(base, REG_FER);
+ pc873xx_write(base, REG_FER, data | 0x40);
+}
--- /dev/null
+
+#ifndef _PC873xx_H_
+#define _PC873xx_H_
+
+/*
+ * Control Register Values
+ */
+#define REG_FER 0x00
+#define REG_FAR 0x01
+#define REG_PTR 0x02
+#define REG_FCR 0x03
+#define REG_PCR 0x04
+#define REG_KRR 0x05
+#define REG_PMC 0x06
+#define REG_TUP 0x07
+#define REG_SID 0x08
+#define REG_ASC 0x09
+#define REG_IRC 0x0e
+
+/*
+ * Model numbers
+ */
+#define PC87303 0
+#define PC87306 1
+#define PC87312 2
+#define PC87332 3
+#define PC87334 4
+
+int pc873xx_probe(void);
+unsigned int pc873xx_get_base(void);
+char *pc873xx_get_model(void);
+void pc873xx_enable_epp19(void);
+void pc873xx_enable_ide(void);
+
+#endif
#include "irq_impl.h"
#include "pci_impl.h"
#include "machvec_impl.h"
+#include "pc873xx.h"
#if defined(ALPHA_RESTORE_SRM_SETUP)
/* Save LCA configuration data as the console had it set up. */
common_init_pci();
sio_pci_route();
sio_fixup_irq_levels(sio_collect_irq_levels());
- ns87312_enable_ide(0x26e);
+
+ if (pc873xx_probe() == -1) {
+ printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
+ } else {
+ printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
+ pc873xx_get_model(), pc873xx_get_base());
+
+ /* Enabling things in the Super IO chip doesn't actually
+ * configure and enable things, the legacy drivers still
+ * need to do the actual configuration and enabling.
+ * This only unblocks them.
+ */
+
+#if !defined(CONFIG_ALPHA_AVANTI)
+ /* Don't bother on the Avanti family.
+ * None of them had on-board IDE.
+ */
+ pc873xx_enable_ide();
+#endif
+ pc873xx_enable_epp19();
+ }
}
static inline void __init
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff