ARM: S5PV210: Add SDHCI devices for GONI board

This patch add support for SDHCI blocks on Samsung Goni board. The
following host controllers are defined:
1. Internal MoviNAND device (permanently wired to the controller)
2. Internal WiFI SDIO device (card is activated by power regualor)
3. External MMC/SD socket (card detection is provided by external
gpio interrupt)

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index a392748dffa08a5c637d5c4e05574811d67fcace..9b84abf1a82241dfb1c8257844d235288655288d 100644 (file)
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -74,8 +74,12 @@ config MACH_GONI
        select CPU_S5PV210
        select ARCH_SPARSEMEM_ENABLE
        select S5PV210_SETUP_FB_24BPP
+       select S5PV210_SETUP_SDHCI
        select S3C_DEV_FB
        select S5PC110_DEV_ONENAND
+       select S3C_DEV_HSMMC
+       select S3C_DEV_HSMMC1
+       select S3C_DEV_HSMMC2
        help
          Machine support for Samsung GONI board
          S5PC110(MCP) is one of package option of S5PV210

diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 7b18505e5171fce91ddae630c8b6a2a76b6d434e..a094b44a43e898d9814ffff8d6a209326345a4e3 100644 (file)
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -35,6 +35,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/fb.h>
+#include <plat/sdhci.h>
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define S5PV210_UCON_DEFAULT   (S3C2410_UCON_TXILEVEL |        \
@@ -420,12 +421,47 @@ static void __init goni_pmic_init(void)
        s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP);
 }
 
+/* MoviNAND */
+static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = {
+       .max_width              = 4,
+       .cd_type                = S3C_SDHCI_CD_PERMANENT,
+};
+
+/* Wireless LAN */
+static struct s3c_sdhci_platdata goni_hsmmc1_data __initdata = {
+       .max_width              = 4,
+       .cd_type                = S3C_SDHCI_CD_EXTERNAL,
+       /* ext_cd_{init,cleanup} callbacks will be added later */
+};
+
+/* External Flash */
+#define GONI_EXT_FLASH_EN      S5PV210_MP05(4)
+#define GONI_EXT_FLASH_CD      S5PV210_GPH3(4)
+static struct s3c_sdhci_platdata goni_hsmmc2_data __initdata = {
+       .max_width              = 4,
+       .cd_type                = S3C_SDHCI_CD_GPIO,
+       .ext_cd_gpio            = GONI_EXT_FLASH_CD,
+       .ext_cd_gpio_invert     = 1,
+};
+
+static void goni_setup_sdhci(void)
+{
+       gpio_request(GONI_EXT_FLASH_EN, "FLASH_EN");
+       gpio_direction_output(GONI_EXT_FLASH_EN, 1);
+
+       s3c_sdhci0_set_platdata(&goni_hsmmc0_data);
+       s3c_sdhci1_set_platdata(&goni_hsmmc1_data);
+       s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
+};
 
 static struct platform_device *goni_devices[] __initdata = {
        &s3c_device_fb,
        &s5pc110_device_onenand,
        &goni_i2c_gpio_pmic,
        &goni_device_gpiokeys,
+       &s3c_device_hsmmc0,
+       &s3c_device_hsmmc1,
+       &s3c_device_hsmmc2,
 };
 
 static void __init goni_map_io(void)
@@ -441,6 +477,9 @@ static void __init goni_machine_init(void)
        goni_pmic_init();
        i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
                        ARRAY_SIZE(i2c_gpio_pmic_devs));
+       /* SDHCI */
+       goni_setup_sdhci();
+
        /* FB */
        s3c_fb_set_platdata(&goni_lcd_pdata);