--- /dev/null
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
+ *
+ * License terms:GNU General Public License (GPL) version 2
+ *
+ * Keypad controller driver for the SKE (Scroll Key Encoder) module used in
+ * the Nomadik 8815 and Ux500 platforms.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+
+#include <plat/ske.h>
+
+/* SKE_CR bits */
+#define SKE_KPMLT (0x1 << 6)
+#define SKE_KPCN (0x7 << 3)
+#define SKE_KPASEN (0x1 << 2)
+#define SKE_KPASON (0x1 << 7)
+
+/* SKE_IMSC bits */
+#define SKE_KPIMA (0x1 << 2)
+
+/* SKE_ICR bits */
+#define SKE_KPICS (0x1 << 3)
+#define SKE_KPICA (0x1 << 2)
+
+/* SKE_RIS bits */
+#define SKE_KPRISA (0x1 << 2)
+
+#define SKE_KEYPAD_ROW_SHIFT 3
+#define SKE_KPD_KEYMAP_SIZE (8 * 8)
+
+/* keypad auto scan registers */
+#define SKE_ASR0 0x20
+#define SKE_ASR1 0x24
+#define SKE_ASR2 0x28
+#define SKE_ASR3 0x2C
+
+#define SKE_NUM_ASRX_REGISTERS (4)
+
+/**
+ * struct ske_keypad - data structure used by keypad driver
+ * @irq: irq no
+ * @reg_base: ske regsiters base address
+ * @input: pointer to input device object
+ * @board: keypad platform device
+ * @keymap: matrix scan code table for keycodes
+ * @clk: clock structure pointer
+ */
+struct ske_keypad {
+ int irq;
+ void __iomem *reg_base;
+ struct input_dev *input;
+ const struct ske_keypad_platform_data *board;
+ unsigned short keymap[SKE_KPD_KEYMAP_SIZE];
+ struct clk *clk;
+ spinlock_t ske_keypad_lock;
+};
+
+static void ske_keypad_set_bits(struct ske_keypad *keypad, u16 addr,
+ u8 mask, u8 data)
+{
+ u32 ret;
+
+ spin_lock(&keypad->ske_keypad_lock);
+
+ ret = readl(keypad->reg_base + addr);
+ ret &= ~mask;
+ ret |= data;
+ writel(ret, keypad->reg_base + addr);
+
+ spin_unlock(&keypad->ske_keypad_lock);
+}
+
+/*
+ * ske_keypad_chip_init: init keypad controller configuration
+ *
+ * Enable Multi key press detection, auto scan mode
+ */
+static int __devinit ske_keypad_chip_init(struct ske_keypad *keypad)
+{
+ u32 value;
+ int timeout = 50;
+
+ /* check SKE_RIS to be 0 */
+ while ((readl(keypad->reg_base + SKE_RIS) != 0x00000000) && timeout--)
+ cpu_relax();
+
+ if (!timeout)
+ return -EINVAL;
+
+ /*
+ * set debounce value
+ * keypad dbounce is configured in DBCR[15:8]
+ * dbounce value in steps of 32/32.768 ms
+ */
+ spin_lock(&keypad->ske_keypad_lock);
+ value = readl(keypad->reg_base + SKE_DBCR);
+ value = value & 0xff;
+ value |= ((keypad->board->debounce_ms * 32000)/32768) << 8;
+ writel(value, keypad->reg_base + SKE_DBCR);
+ spin_unlock(&keypad->ske_keypad_lock);
+
+ /* enable multi key detection */
+ ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPMLT);
+
+ /*
+ * set up the number of columns
+ * KPCN[5:3] defines no. of keypad columns to be auto scanned
+ */
+ value = (keypad->board->kcol - 1) << 3;
+ ske_keypad_set_bits(keypad, SKE_CR, SKE_KPCN, value);
+
+ /* clear keypad interrupt for auto(and pending SW) scans */
+ ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA | SKE_KPICS);
+
+ /* un-mask keypad interrupts */
+ ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
+
+ /* enable automatic scan */
+ ske_keypad_set_bits(keypad, SKE_CR, 0x0, SKE_KPASEN);
+
+ return 0;
+}
+
+static void ske_keypad_read_data(struct ske_keypad *keypad)
+{
+ struct input_dev *input = keypad->input;
+ u16 status;
+ int col = 0, row = 0, code;
+ int ske_asr, ske_ris, key_pressed, i;
+
+ /*
+ * Read the auto scan registers
+ *
+ * Each SKE_ASRx (x=0 to x=3) contains two row values.
+ * lower byte contains row value for column 2*x,
+ * upper byte contains row value for column 2*x + 1
+ */
+ for (i = 0; i < SKE_NUM_ASRX_REGISTERS; i++) {
+ ske_asr = readl(keypad->reg_base + SKE_ASR0 + (4 * i));
+ if (!ske_asr)
+ continue;
+
+ /* now that ASRx is zero, find out the column x and row y*/
+ if (ske_asr & 0xff) {
+ col = i * 2;
+ status = ske_asr & 0xff;
+ } else {
+ col = (i * 2) + 1;
+ status = (ske_asr & 0xff00) >> 8;
+ }
+
+ /* find out the row */
+ row = __ffs(status);
+
+ code = MATRIX_SCAN_CODE(row, col, SKE_KEYPAD_ROW_SHIFT);
+ ske_ris = readl(keypad->reg_base + SKE_RIS);
+ key_pressed = ske_ris & SKE_KPRISA;
+
+ input_event(input, EV_MSC, MSC_SCAN, code);
+ input_report_key(input, keypad->keymap[code], key_pressed);
+ input_sync(input);
+ }
+}
+
+static irqreturn_t ske_keypad_irq(int irq, void *dev_id)
+{
+ struct ske_keypad *keypad = dev_id;
+ int retries = 20;
+
+ /* disable auto scan interrupt; mask the interrupt generated */
+ ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0);
+ ske_keypad_set_bits(keypad, SKE_ICR, 0x0, SKE_KPICA);
+
+ while ((readl(keypad->reg_base + SKE_CR) & SKE_KPASON) && --retries)
+ msleep(5);
+
+ if (retries) {
+ /* SKEx registers are stable and can be read */
+ ske_keypad_read_data(keypad);
+ }
+
+ /* enable auto scan interrupts */
+ ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit ske_keypad_probe(struct platform_device *pdev)
+{
+ const struct ske_keypad_platform_data *plat = pdev->dev.platform_data;
+ struct ske_keypad *keypad;
+ struct input_dev *input;
+ struct resource *res;
+ int irq;
+ int error;
+
+ if (!plat) {
+ dev_err(&pdev->dev, "invalid keypad platform data\n");
+ return -EINVAL;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "failed to get keypad irq\n");
+ return -EINVAL;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "missing platform resources\n");
+ return -EINVAL;
+ }
+
+ keypad = kzalloc(sizeof(struct ske_keypad), GFP_KERNEL);
+ input = input_allocate_device();
+ if (!keypad || !input) {
+ dev_err(&pdev->dev, "failed to allocate keypad memory\n");
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ keypad->irq = irq;
+ keypad->board = plat;
+ keypad->input = input;
+ spin_lock_init(&keypad->ske_keypad_lock);
+
+ if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+ dev_err(&pdev->dev, "failed to request I/O memory\n");
+ error = -EBUSY;
+ goto err_free_mem;
+ }
+
+ keypad->reg_base = ioremap(res->start, resource_size(res));
+ if (!keypad->reg_base) {
+ dev_err(&pdev->dev, "failed to remap I/O memory\n");
+ error = -ENXIO;
+ goto err_free_mem_region;
+ }
+
+ keypad->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(keypad->clk)) {
+ dev_err(&pdev->dev, "failed to get clk\n");
+ error = PTR_ERR(keypad->clk);
+ goto err_iounmap;
+ }
+
+ input->id.bustype = BUS_HOST;
+ input->name = "ux500-ske-keypad";
+ input->dev.parent = &pdev->dev;
+
+ input->keycode = keypad->keymap;
+ input->keycodesize = sizeof(keypad->keymap[0]);
+ input->keycodemax = ARRAY_SIZE(keypad->keymap);
+
+ input_set_capability(input, EV_MSC, MSC_SCAN);
+
+ __set_bit(EV_KEY, input->evbit);
+ if (!plat->no_autorepeat)
+ __set_bit(EV_REP, input->evbit);
+
+ matrix_keypad_build_keymap(plat->keymap_data, SKE_KEYPAD_ROW_SHIFT,
+ input->keycode, input->keybit);
+
+ clk_enable(keypad->clk);
+
+ /* go through board initialization helpers */
+ if (keypad->board->init)
+ keypad->board->init();
+
+ error = ske_keypad_chip_init(keypad);
+ if (error) {
+ dev_err(&pdev->dev, "unable to init keypad hardware\n");
+ goto err_clk_disable;
+ }
+
+ error = request_threaded_irq(keypad->irq, NULL, ske_keypad_irq,
+ IRQF_ONESHOT, "ske-keypad", keypad);
+ if (error) {
+ dev_err(&pdev->dev, "allocate irq %d failed\n", keypad->irq);
+ goto err_clk_disable;
+ }
+
+ error = input_register_device(input);
+ if (error) {
+ dev_err(&pdev->dev,
+ "unable to register input device: %d\n", error);
+ goto err_free_irq;
+ }
+
+ if (plat->wakeup_enable)
+ device_init_wakeup(&pdev->dev, true);
+
+ platform_set_drvdata(pdev, keypad);
+
+ return 0;
+
+err_free_irq:
+ free_irq(keypad->irq, keypad);
+err_clk_disable:
+ clk_disable(keypad->clk);
+ clk_put(keypad->clk);
+err_iounmap:
+ iounmap(keypad->reg_base);
+err_free_mem_region:
+ release_mem_region(res->start, resource_size(res));
+err_free_mem:
+ input_free_device(input);
+ kfree(keypad);
+ return error;
+}
+
+static int __devexit ske_keypad_remove(struct platform_device *pdev)
+{
+ struct ske_keypad *keypad = platform_get_drvdata(pdev);
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ free_irq(keypad->irq, keypad);
+
+ input_unregister_device(keypad->input);
+
+ clk_disable(keypad->clk);
+ clk_put(keypad->clk);
+
+ if (keypad->board->exit)
+ keypad->board->exit();
+
+ iounmap(keypad->reg_base);
+ release_mem_region(res->start, resource_size(res));
+ kfree(keypad);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ske_keypad_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ske_keypad *keypad = platform_get_drvdata(pdev);
+ int irq = platform_get_irq(pdev, 0);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(irq);
+ else
+ ske_keypad_set_bits(keypad, SKE_IMSC, ~SKE_KPIMA, 0x0);
+
+ return 0;
+}
+
+static int ske_keypad_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct ske_keypad *keypad = platform_get_drvdata(pdev);
+ int irq = platform_get_irq(pdev, 0);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(irq);
+ else
+ ske_keypad_set_bits(keypad, SKE_IMSC, 0x0, SKE_KPIMA);
+
+ return 0;
+}
+
+static const struct dev_pm_ops ske_keypad_dev_pm_ops = {
+ .suspend = ske_keypad_suspend,
+ .resume = ske_keypad_resume,
+};
+#endif
+
+struct platform_driver ske_keypad_driver = {
+ .driver = {
+ .name = "nmk-ske-keypad",
+ .owner = THIS_MODULE,
+#ifdef CONFIG_PM
+ .pm = &ske_keypad_dev_pm_ops,
+#endif
+ },
+ .probe = ske_keypad_probe,
+ .remove = __devexit_p(ske_keypad_remove),
+};
+
+static int __init ske_keypad_init(void)
+{
+ return platform_driver_probe(&ske_keypad_driver, ske_keypad_probe);
+}
+module_init(ske_keypad_init);
+
+static void __exit ske_keypad_exit(void)
+{
+ platform_driver_unregister(&ske_keypad_driver);
+}
+module_exit(ske_keypad_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Naveen Kumar <naveen.gaddipati@stericsson.com> / Sundar Iyer <sundar.iyer@stericsson.com>");
+MODULE_DESCRIPTION("Nomadik Scroll-Key-Encoder Keypad Driver");
+MODULE_ALIAS("platform:nomadik-ske-keypad");
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff