acpi_display_output=video
See above.
+ acpi_early_pdc_eval [HW,ACPI] Evaluate processor _PDC methods
+ early. Needed on some platforms to properly
+ initialize the EC.
+
acpi_irq_balance [HW,ACPI]
ACPI will balance active IRQs
default in APIC mode
#define acpi_noirq 0 /* ACPI always enabled on IA64 */
#define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */
#define acpi_strict 1 /* no ACPI spec workarounds on IA64 */
+#define acpi_ht 0 /* no HT-only mode on IA64 */
#endif
#define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */
static inline void disable_acpi(void) { }
relevant until we have real hardware to play with... */
#define ELF_PLATFORM NULL
-#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+#define SET_PERSONALITY(ex) \
+ set_personality((current->personality & ~PER_MASK) | PER_LINUX)
+
#define elf_read_implies_exec(ex, executable_stack) \
((executable_stack!=EXSTACK_DISABLE_X) && ((ex).e_flags & EF_IA_64_LINUX_EXECUTABLE_STACK) != 0)
struct pt_regs *regs = child->thread.uregs;
regs->sr |= SR_SSTEP; /* auto-resetting upon exception */
+
+ set_tsk_thread_flag(child, TIF_SINGLESTEP);
}
void user_disable_single_step(struct task_struct *child)
struct pt_regs *regs = child->thread.uregs;
regs->sr &= ~SR_SSTEP;
+
+ clear_tsk_thread_flag(child, TIF_SINGLESTEP);
}
static int genregs_get(struct task_struct *target,
asmlinkage void do_syscall_trace_leave(struct pt_regs *regs)
{
+ int step;
+
if (unlikely(current->audit_context))
audit_syscall_exit(AUDITSC_RESULT(regs->regs[9]),
regs->regs[9]);
if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
trace_sys_exit(regs, regs->regs[9]);
- if (test_thread_flag(TIF_SYSCALL_TRACE))
- tracehook_report_syscall_exit(regs, 0);
+ step = test_thread_flag(TIF_SINGLESTEP);
+ if (step || test_thread_flag(TIF_SYSCALL_TRACE))
+ tracehook_report_syscall_exit(regs, step);
}
/* Called with interrupts disabled */
* clear the TS_RESTORE_SIGMASK flag.
*/
current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
- tracehook_signal_handler(signr, &info, &ka, regs, 0);
+
+ tracehook_signal_handler(signr, &info, &ka, regs,
+ test_thread_flag(TIF_SINGLESTEP));
return 1;
}
}
}
#define ELF_PLAT_INIT(_r, load_addr) \
-do { \
- elf_common_init(¤t->thread, _r, 0); \
- clear_thread_flag(TIF_IA32); \
-} while (0)
+ elf_common_init(¤t->thread, _r, 0)
#define COMPAT_ELF_PLAT_INIT(regs, load_addr) \
elf_common_init(¤t->thread, regs, __USER_DS)
DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"),
},
},
- {
- .callback = force_acpi_ht,
- .ident = "ASUS P2B-DS",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
- DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"),
- },
- },
{
.callback = force_acpi_ht,
.ident = "ASUS CUR-DLS",
/* Make sure to be in 32bit mode */
set_thread_flag(TIF_IA32);
+ current->personality |= force_personality32;
/* Prepare the first "return" to user space */
current_thread_info()->status |= TS_COMPAT;
struct platform_device *dd;
id = dock_station_count;
+ memset(&ds, 0, sizeof(ds));
dd = platform_device_register_data(NULL, "dock", id, &ds, sizeof(ds));
if (IS_ERR(dd))
return PTR_ERR(dd);
DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"),
DMI_MATCH(DMI_BIOS_VERSION,"SHE845M0.86C.0013.D.0302131307")},
(void *)2},
+ { set_max_cstate, "Pavilion zv5000", {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME,"Pavilion zv5000 (DS502A#ABA)")},
+ (void *)1},
+ { set_max_cstate, "Asus L8400B", {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME,"L8400B series Notebook PC")},
+ (void *)1},
{},
};
return status;
}
+static int early_pdc_done;
+
void acpi_processor_set_pdc(acpi_handle handle)
{
struct acpi_object_list *obj_list;
if (arch_has_acpi_pdc() == false)
return;
+ if (early_pdc_done)
+ return;
+
obj_list = acpi_processor_alloc_pdc();
if (!obj_list)
return;
return 0;
}
+static int param_early_pdc_optin(char *s)
+{
+ early_pdc_optin = 1;
+ return 1;
+}
+__setup("acpi_early_pdc_eval", param_early_pdc_optin);
+
static struct dmi_system_id __cpuinitdata early_pdc_optin_table[] = {
{
set_early_pdc_optin, "HP Envy", {
acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
ACPI_UINT32_MAX,
early_init_pdc, NULL, NULL, NULL);
+
+ early_pdc_done = 1;
}
if (child)
*child = device;
- return 0;
+
+ if (device)
+ return 0;
+ else
+ return -ENODEV;
}
+/*
+ * acpi_bus_add and acpi_bus_start
+ *
+ * scan a given ACPI tree and (probably recently hot-plugged)
+ * create and add or starts found devices.
+ *
+ * If no devices were found -ENODEV is returned which does not
+ * mean that this is a real error, there just have been no suitable
+ * ACPI objects in the table trunk from which the kernel could create
+ * a device and add/start an appropriate driver.
+ */
+
int
acpi_bus_add(struct acpi_device **child,
struct acpi_device *parent, acpi_handle handle, int type)
memset(&ops, 0, sizeof(ops));
ops.acpi_op_add = 1;
- acpi_bus_scan(handle, &ops, child);
- return 0;
+ return acpi_bus_scan(handle, &ops, child);
}
EXPORT_SYMBOL(acpi_bus_add);
{
struct acpi_bus_ops ops;
+ if (!device)
+ return -EINVAL;
+
memset(&ops, 0, sizeof(ops));
ops.acpi_op_start = 1;
- acpi_bus_scan(device->handle, &ops, NULL);
- return 0;
+ return acpi_bus_scan(device->handle, &ops, NULL);
}
EXPORT_SYMBOL(acpi_bus_start);
unsigned long table_end;
acpi_size tbl_size;
- if (acpi_disabled)
+ if (acpi_disabled && !acpi_ht)
return -ENODEV;
if (!handler)
struct acpi_table_header *table = NULL;
acpi_size tbl_size;
- if (acpi_disabled)
+ if (acpi_disabled && !acpi_ht)
return -ENODEV;
if (!handler)
else
pr_debug("class '%s' does not have a release() function, "
"be careful\n", class->name);
+
+ kfree(cp);
}
static struct sysfs_ops class_sysfs_ops = {
static struct kmem_cache *fwnet_packet_task_cache;
+static void fwnet_free_ptask(struct fwnet_packet_task *ptask)
+{
+ dev_kfree_skb_any(ptask->skb);
+ kmem_cache_free(fwnet_packet_task_cache, ptask);
+}
+
static int fwnet_send_packet(struct fwnet_packet_task *ptask);
static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
{
- struct fwnet_device *dev;
+ struct fwnet_device *dev = ptask->dev;
unsigned long flags;
-
- dev = ptask->dev;
+ bool free;
spin_lock_irqsave(&dev->lock, flags);
- list_del(&ptask->pt_link);
- spin_unlock_irqrestore(&dev->lock, flags);
- ptask->outstanding_pkts--; /* FIXME access inside lock */
+ ptask->outstanding_pkts--;
+
+ /* Check whether we or the networking TX soft-IRQ is last user. */
+ free = (ptask->outstanding_pkts == 0 && !list_empty(&ptask->pt_link));
+
+ if (ptask->outstanding_pkts == 0)
+ list_del(&ptask->pt_link);
+
+ spin_unlock_irqrestore(&dev->lock, flags);
if (ptask->outstanding_pkts > 0) {
u16 dg_size;
ptask->max_payload = skb->len + RFC2374_FRAG_HDR_SIZE;
}
fwnet_send_packet(ptask);
- } else {
- dev_kfree_skb_any(ptask->skb);
- kmem_cache_free(fwnet_packet_task_cache, ptask);
}
+
+ if (free)
+ fwnet_free_ptask(ptask);
}
static void fwnet_write_complete(struct fw_card *card, int rcode,
unsigned tx_len;
struct rfc2734_header *bufhdr;
unsigned long flags;
+ bool free;
dev = ptask->dev;
tx_len = ptask->max_payload;
generation, SCODE_100, 0ULL, ptask->skb->data,
tx_len + 8, fwnet_write_complete, ptask);
- /* FIXME race? */
spin_lock_irqsave(&dev->lock, flags);
- list_add_tail(&ptask->pt_link, &dev->broadcasted_list);
+
+ /* If the AT tasklet already ran, we may be last user. */
+ free = (ptask->outstanding_pkts == 0 && list_empty(&ptask->pt_link));
+ if (!free)
+ list_add_tail(&ptask->pt_link, &dev->broadcasted_list);
+
spin_unlock_irqrestore(&dev->lock, flags);
- return 0;
+ goto out;
}
fw_send_request(dev->card, &ptask->transaction,
ptask->generation, ptask->speed, ptask->fifo_addr,
ptask->skb->data, tx_len, fwnet_write_complete, ptask);
- /* FIXME race? */
spin_lock_irqsave(&dev->lock, flags);
- list_add_tail(&ptask->pt_link, &dev->sent_list);
+
+ /* If the AT tasklet already ran, we may be last user. */
+ free = (ptask->outstanding_pkts == 0 && list_empty(&ptask->pt_link));
+ if (!free)
+ list_add_tail(&ptask->pt_link, &dev->sent_list);
+
spin_unlock_irqrestore(&dev->lock, flags);
dev->netdev->trans_start = jiffies;
+ out:
+ if (free)
+ fwnet_free_ptask(ptask);
return 0;
}
spin_unlock_irqrestore(&dev->lock, flags);
ptask->max_payload = max_payload;
+ INIT_LIST_HEAD(&ptask->pt_link);
+
fwnet_send_packet(ptask);
return NETDEV_TX_OK;
u32 payload_index, payload_end_index, next_page_index;
int page, end_page, i, length, offset;
- /*
- * FIXME: Cycle lost behavior should be configurable: lose
- * packet, retransmit or terminate..
- */
-
p = packet;
payload_index = payload;
if (!p->skip) {
d[0].control = cpu_to_le16(DESCRIPTOR_KEY_IMMEDIATE);
d[0].req_count = cpu_to_le16(8);
+ /*
+ * Link the skip address to this descriptor itself. This causes
+ * a context to skip a cycle whenever lost cycles or FIFO
+ * overruns occur, without dropping the data. The application
+ * should then decide whether this is an error condition or not.
+ * FIXME: Make the context's cycle-lost behaviour configurable?
+ */
+ d[0].branch_address = cpu_to_le32(d_bus | z);
header = (__le32 *) &d[1];
header[0] = cpu_to_le32(IT_HEADER_SY(p->sy) |
wasted += alignment - tmp;
}
- if (entry->size >= size + wasted) {
+ if (entry->size >= size + wasted &&
+ (entry->start + wasted + size) <= end) {
if (!best_match)
return entry;
if (entry->size < best_size) {
#include <linux/module.h>
#include <linux/sched.h>
+#include <asm/unaligned.h>
#define ATOM_DEBUG
case ATOM_ARG_PS:
idx = U8(*ptr);
(*ptr)++;
- val = le32_to_cpu(ctx->ps[idx]);
+ /* get_unaligned_le32 avoids unaligned accesses from atombios
+ * tables, noticed on a DEC Alpha. */
+ val = get_unaligned_le32((u32 *)&ctx->ps[idx]);
if (print)
DEBUG("PS[0x%02X,0x%04X]", idx, val);
break;
atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
if (args.ucReplyStatus && !args.ucDataOutLen) {
- if (args.ucReplyStatus == 0x20 && retry_count < 10)
+ if (args.ucReplyStatus == 0x20 && retry_count++ < 10)
goto retry;
DRM_DEBUG("failed to get auxch %02x%02x %02x %02x 0x%02x %02x after %d retries\n",
req_bytes[1], req_bytes[0], req_bytes[2], req_bytes[3],
struct ttm_mem_reg *mem)
{
int i;
+ struct drm_mm_node *node = mem->mm_node;
+
+ if (node && placement->lpfn != 0 &&
+ (node->start < placement->fpfn ||
+ node->start + node->size > placement->lpfn))
+ return -1;
for (i = 0; i < placement->num_placement; i++) {
if ((placement->placement[i] & mem->placement &
{
int r = 0;
size_t dummy = 0;
- int overhead_size =
- sizeof(struct dm_ulog_request *) + sizeof(struct cn_msg);
+ int overhead_size = sizeof(struct dm_ulog_request) + sizeof(struct cn_msg);
struct dm_ulog_request *tfr = prealloced_ulog_tfr;
struct receiving_pkg pkg;
+ /*
+ * Given the space needed to hold the 'struct cn_msg' and
+ * 'struct dm_ulog_request' - do we have enough payload
+ * space remaining?
+ */
if (data_size > (DM_ULOG_PREALLOCED_SIZE - overhead_size)) {
DMINFO("Size of tfr exceeds preallocated size");
return -EINVAL;
*/
mutex_lock(&dm_ulog_lock);
- memset(tfr, 0, DM_ULOG_PREALLOCED_SIZE - overhead_size);
+ memset(tfr, 0, DM_ULOG_PREALLOCED_SIZE - sizeof(struct cn_msg));
memcpy(tfr->uuid, uuid, DM_UUID_LEN);
tfr->luid = luid;
tfr->seq = dm_ulog_seq++;
/*
* Dispatch io.
*/
- if (unlikely(ms->log_failure)) {
+ if (unlikely(ms->log_failure) && errors_handled(ms)) {
spin_lock_irq(&ms->lock);
bio_list_merge(&ms->failures, &sync);
spin_unlock_irq(&ms->lock);
spin_lock_irq(&rh->region_lock);
if (success)
list_add(®->list, ®->rh->recovered_regions);
- else {
- reg->state = DM_RH_NOSYNC;
+ else
list_add(®->list, ®->rh->failed_recovered_regions);
- }
+
spin_unlock_irq(&rh->region_lock);
rh->wakeup_workers(rh->context);
* Issue the synchronous I/O from a different thread
* to avoid generic_make_request recursion.
*/
- INIT_WORK(&req.work, do_metadata);
+ INIT_WORK_ON_STACK(&req.work, do_metadata);
queue_work(ps->metadata_wq, &req.work);
flush_workqueue(ps->metadata_wq);
}
stripes = simple_strtoul(argv[0], &end, 10);
- if (*end) {
+ if (!stripes || *end) {
ti->error = "Invalid stripe count";
return -EINVAL;
}
.show = dm_attr_show,
};
-/*
- * The sysfs structure is embedded in md struct, nothing to do here
- */
-static void dm_sysfs_release(struct kobject *kobj)
-{
-}
-
/*
* dm kobject is embedded in mapped_device structure
* no need to define release function here
static struct kobj_type dm_ktype = {
.sysfs_ops = &dm_sysfs_ops,
.default_attrs = dm_attrs,
- .release = dm_sysfs_release
};
/*
return BLKPREP_OK;
}
-static void map_request(struct dm_target *ti, struct request *clone,
- struct mapped_device *md)
+/*
+ * Returns:
+ * 0 : the request has been processed (not requeued)
+ * !0 : the request has been requeued
+ */
+static int map_request(struct dm_target *ti, struct request *clone,
+ struct mapped_device *md)
{
- int r;
+ int r, requeued = 0;
struct dm_rq_target_io *tio = clone->end_io_data;
/*
case DM_MAPIO_REQUEUE:
/* The target wants to requeue the I/O */
dm_requeue_unmapped_request(clone);
+ requeued = 1;
break;
default:
if (r > 0) {
dm_kill_unmapped_request(clone, r);
break;
}
+
+ return requeued;
}
/*
atomic_inc(&md->pending[rq_data_dir(clone)]);
spin_unlock(q->queue_lock);
- map_request(ti, clone, md);
+ if (map_request(ti, clone, md))
+ goto requeued;
+
spin_lock_irq(q->queue_lock);
}
goto out;
+requeued:
+ spin_lock_irq(q->queue_lock);
+
plug_and_out:
if (!elv_queue_empty(q))
/* Some requests still remain, retry later */
req_hdr->opcode = opcode;
req_hdr->subsystem = subsystem;
req_hdr->request_length = cpu_to_le32(cmd_len - sizeof(*req_hdr));
+ req_hdr->version = 0;
}
static void be_cmd_page_addrs_prepare(struct phys_addr *pages, u32 max_pages,
u32 fctrl_reg;
u32 rmcs_reg;
u32 reg;
+ u32 link_speed = 0;
+ bool link_up;
#ifdef CONFIG_DCB
if (hw->fc.requested_mode == ixgbe_fc_pfc)
goto out;
#endif /* CONFIG_DCB */
+ /*
+ * On 82598 having Rx FC on causes resets while doing 1G
+ * so if it's on turn it off once we know link_speed. For
+ * more details see 82598 Specification update.
+ */
+ hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+ if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) {
+ switch (hw->fc.requested_mode) {
+ case ixgbe_fc_full:
+ hw->fc.requested_mode = ixgbe_fc_tx_pause;
+ break;
+ case ixgbe_fc_rx_pause:
+ hw->fc.requested_mode = ixgbe_fc_none;
+ break;
+ default:
+ /* no change */
+ break;
+ }
+ }
+
/* Negotiate the fc mode to use */
ret_val = ixgbe_fc_autoneg(hw);
if (ret_val)
if (err)
goto err_sw_init;
+ /* Make it possible the adapter to be woken up via WOL */
+ if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0);
+
/*
* If there is a fan on this device and it has failed log the
* failure.
fail2:
efx_fini_struct(efx);
fail1:
+ WARN_ON(rc > 0);
EFX_LOG(efx, "initialisation failed. rc=%d\n", rc);
free_netdev(net_dev);
return rc;
falcon_board(efx)->type->init_phy(efx);
- return rc;
+ return 0;
fail:
EFX_ERR(efx, "PHY reset timed out\n");
/**
* tx_srv - transmit interrupt service
* @vptr; Velocity
- * @status:
*
* Scan the queues looking for transmitted packets that
* we can complete and clean up. Update any statistics as
* necessary/
*/
-static int velocity_tx_srv(struct velocity_info *vptr, u32 status)
+static int velocity_tx_srv(struct velocity_info *vptr)
{
struct tx_desc *td;
int qnum;
/**
* velocity_rx_srv - service RX interrupt
* @vptr: velocity
- * @status: adapter status (unused)
*
* Walk the receive ring of the velocity adapter and remove
* any received packets from the receive queue. Hand the ring
* slots back to the adapter for reuse.
*/
-static int velocity_rx_srv(struct velocity_info *vptr, int status,
- int budget_left)
+static int velocity_rx_srv(struct velocity_info *vptr, int budget_left)
{
struct net_device_stats *stats = &vptr->dev->stats;
int rd_curr = vptr->rx.curr;
struct velocity_info *vptr = container_of(napi,
struct velocity_info, napi);
unsigned int rx_done;
- u32 isr_status;
-
- spin_lock(&vptr->lock);
- isr_status = mac_read_isr(vptr->mac_regs);
-
- /* Ack the interrupt */
- mac_write_isr(vptr->mac_regs, isr_status);
- if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
- velocity_error(vptr, isr_status);
+ unsigned long flags;
+ spin_lock_irqsave(&vptr->lock, flags);
/*
* Do rx and tx twice for performance (taken from the VIA
* out-of-tree driver).
*/
- rx_done = velocity_rx_srv(vptr, isr_status, budget / 2);
- velocity_tx_srv(vptr, isr_status);
- rx_done += velocity_rx_srv(vptr, isr_status, budget - rx_done);
- velocity_tx_srv(vptr, isr_status);
-
- spin_unlock(&vptr->lock);
+ rx_done = velocity_rx_srv(vptr, budget / 2);
+ velocity_tx_srv(vptr);
+ rx_done += velocity_rx_srv(vptr, budget - rx_done);
+ velocity_tx_srv(vptr);
/* If budget not fully consumed, exit the polling mode */
if (rx_done < budget) {
napi_complete(napi);
mac_enable_int(vptr->mac_regs);
}
+ spin_unlock_irqrestore(&vptr->lock, flags);
return rx_done;
}
return IRQ_NONE;
}
+ /* Ack the interrupt */
+ mac_write_isr(vptr->mac_regs, isr_status);
+
if (likely(napi_schedule_prep(&vptr->napi))) {
mac_disable_int(vptr->mac_regs);
__napi_schedule(&vptr->napi);
}
+
+ if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
+ velocity_error(vptr, isr_status);
+
spin_unlock(&vptr->lock);
return IRQ_HANDLED;
velocity_init_registers(vptr, VELOCITY_INIT_WOL);
mac_disable_int(vptr->mac_regs);
- velocity_tx_srv(vptr, 0);
+ velocity_tx_srv(vptr);
for (i = 0; i < vptr->tx.numq; i++) {
if (vptr->tx.used[i])
{
struct velocity_info *vptr = netdev_priv(dev);
int max_us = 0x3f * 64;
+ unsigned long flags;
/* 6 bits of */
if (ecmd->tx_coalesce_usecs > max_us)
ecmd->tx_coalesce_usecs);
/* Setup the interrupt suppression and queue timers */
+ spin_lock_irqsave(&vptr->lock, flags);
mac_disable_int(vptr->mac_regs);
setup_adaptive_interrupts(vptr);
setup_queue_timers(vptr);
mac_write_int_mask(vptr->int_mask, vptr->mac_regs);
mac_clear_isr(vptr->mac_regs);
mac_enable_int(vptr->mac_regs);
+ spin_unlock_irqrestore(&vptr->lock, flags);
return 0;
}
bf->bf_frmlen -= padsize;
}
- if (conf_is_ht(&hw->conf) && !is_pae(skb))
+ if (conf_is_ht(&hw->conf))
bf->bf_state.bf_type |= BUF_HT;
bf->bf_flags = setup_tx_flags(sc, skb, txctl->txq);
goto tx_done;
}
- if (tx_info->flags & IEEE80211_TX_CTL_AMPDU) {
+ if ((tx_info->flags & IEEE80211_TX_CTL_AMPDU) && !is_pae(skb)) {
/*
* Try aggregation if it's a unicast data frame
* and the destination is HT capable.
#define B43_MMIO_TSF_2 0x636 /* core rev < 3 only */
#define B43_MMIO_TSF_3 0x638 /* core rev < 3 only */
#define B43_MMIO_RNG 0x65A
+#define B43_MMIO_IFSSLOT 0x684 /* Interframe slot time */
#define B43_MMIO_IFSCTL 0x688 /* Interframe space control */
#define B43_MMIO_IFSCTL_USE_EDCF 0x0004
#define B43_MMIO_POWERUP_DELAY 0x6A8
static void b43_set_slot_time(struct b43_wldev *dev, u16 slot_time)
{
/* slot_time is in usec. */
- if (dev->phy.type != B43_PHYTYPE_G)
+ /* This test used to exit for all but a G PHY. */
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ)
return;
- b43_write16(dev, 0x684, 510 + slot_time);
- b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time);
+ b43_write16(dev, B43_MMIO_IFSSLOT, 510 + slot_time);
+ /* Shared memory location 0x0010 is the slot time and should be
+ * set to slot_time; however, this register is initially 0 and changing
+ * the value adversely affects the transmit rate for BCM4311
+ * devices. Until this behavior is unterstood, delete this step
+ *
+ * b43_shm_write16(dev, B43_SHM_SHARED, 0x0010, slot_time);
+ */
}
static void b43_short_slot_timing_enable(struct b43_wldev *dev)
if ((le16_to_cpu(priv->staging_rxon.channel) != ch))
priv->staging_rxon.flags = 0;
+ iwl_set_rxon_ht(priv, ht_conf);
iwl_set_rxon_channel(priv, conf->channel);
iwl_set_flags_for_band(priv, conf->channel->band);
if (ieee80211_is_mgmt(fc) ||
ieee80211_has_protected(fc) ||
ieee80211_has_morefrags(fc) ||
- le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)
+ le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG ||
+ (ieee80211_is_data_qos(fc) &&
+ *ieee80211_get_qos_ctl(hdr) &
+ IEEE80211_QOS_CONTROL_A_MSDU_PRESENT))
ret = skb_linearize(skb);
else
ret = __pskb_pull_tail(skb, min_t(u16, IWL_LINK_HDR_MAX, len)) ?
}
bss->bss = kzalloc(bss_len, GFP_KERNEL);
- if (!bss) {
+ if (!bss->bss) {
kfree(bss);
IWM_ERR(iwm, "Couldn't allocate bss\n");
return -ENOMEM;
/* Sitecom */
{USB_DEVICE(0x0df6, 0x000d), .driver_info = DEVICE_RTL8187},
{USB_DEVICE(0x0df6, 0x0028), .driver_info = DEVICE_RTL8187B},
+ {USB_DEVICE(0x0df6, 0x0029), .driver_info = DEVICE_RTL8187B},
/* Sphairon Access Systems GmbH */
{USB_DEVICE(0x114B, 0x0150), .driver_info = DEVICE_RTL8187},
/* Dick Smith Electronics */
-ret_val);
goto acpiphp_bus_add_out;
}
- /*
- * try to start anyway. We could have failed to add
- * simply because this bus had previously been added
- * on another add. Don't bother with the return value
- * we just keep going.
- */
ret_val = acpi_bus_start(device);
acpiphp_bus_add_out:
case TPACPI_THERMAL_ACPI_TMP07:
case TPACPI_THERMAL_ACPI_UPDT:
sysfs_remove_group(&tpacpi_sensors_pdev->dev.kobj,
- &thermal_temp_input16_group);
+ &thermal_temp_input8_group);
break;
case TPACPI_THERMAL_NONE:
default:
#define PASS_LIMIT 256
+#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
+
+
/*
* We default to IRQ0 for the "no irq" hack. Some
* machine types want others as well - they're free
up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
spin_unlock_irqrestore(&up->port.lock, flags);
- return lsr & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+ return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0;
}
static unsigned int serial8250_get_mctrl(struct uart_port *port)
spin_unlock_irqrestore(&up->port.lock, flags);
}
-#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
-
/*
* Wait for transmitter & holding register to empty
*/
#endif
break;
case SSB_BUSTYPE_SDIO:
-#ifdef CONFIG_SSB_SDIO
- sdev->irq = bus->host_sdio->dev.irq;
+#ifdef CONFIG_SSB_SDIOHOST
dev->parent = &bus->host_sdio->dev;
#endif
break;
void __user *addr = as->userurb;
unsigned int i;
- if (as->userbuffer)
+ if (as->userbuffer && urb->actual_length)
if (copy_to_user(as->userbuffer, urb->transfer_buffer,
- urb->transfer_buffer_length))
+ urb->actual_length))
goto err_out;
if (put_user(as->status, &userurb->status))
goto err_out;
}
}
- free_async(as);
-
if (put_user(addr, (void __user * __user *)arg))
return -EFAULT;
return 0;
err_out:
- free_async(as);
return -EFAULT;
}
static int proc_reapurb(struct dev_state *ps, void __user *arg)
{
struct async *as = reap_as(ps);
- if (as)
- return processcompl(as, (void __user * __user *)arg);
+ if (as) {
+ int retval = processcompl(as, (void __user * __user *)arg);
+ free_async(as);
+ return retval;
+ }
if (signal_pending(current))
return -EINTR;
return -EIO;
static int proc_reapurbnonblock(struct dev_state *ps, void __user *arg)
{
+ int retval;
struct async *as;
- if (!(as = async_getcompleted(ps)))
- return -EAGAIN;
- return processcompl(as, (void __user * __user *)arg);
+ as = async_getcompleted(ps);
+ retval = -EAGAIN;
+ if (as) {
+ retval = processcompl(as, (void __user * __user *)arg);
+ free_async(as);
+ }
+ return retval;
}
#ifdef CONFIG_COMPAT
void __user *addr = as->userurb;
unsigned int i;
- if (as->userbuffer)
+ if (as->userbuffer && urb->actual_length)
if (copy_to_user(as->userbuffer, urb->transfer_buffer,
- urb->transfer_buffer_length))
+ urb->actual_length))
return -EFAULT;
if (put_user(as->status, &userurb->status))
return -EFAULT;
}
}
- free_async(as);
if (put_user(ptr_to_compat(addr), (u32 __user *)arg))
return -EFAULT;
return 0;
static int proc_reapurb_compat(struct dev_state *ps, void __user *arg)
{
struct async *as = reap_as(ps);
- if (as)
- return processcompl_compat(as, (void __user * __user *)arg);
+ if (as) {
+ int retval = processcompl_compat(as, (void __user * __user *)arg);
+ free_async(as);
+ return retval;
+ }
if (signal_pending(current))
return -EINTR;
return -EIO;
static int proc_reapurbnonblock_compat(struct dev_state *ps, void __user *arg)
{
+ int retval;
struct async *as;
- if (!(as = async_getcompleted(ps)))
- return -EAGAIN;
- return processcompl_compat(as, (void __user * __user *)arg);
+ retval = -EAGAIN;
+ as = async_getcompleted(ps);
+ if (as) {
+ retval = processcompl_compat(as, (void __user * __user *)arg);
+ free_async(as);
+ }
+ return retval;
}
* b15: bmType (0 == data)
*/
len = skb->len;
- put_unaligned_le16((len & 0x3FFF) | BIT(14), skb_push(skb, 2));
+ put_unaligned_le16(len & 0x3FFF, skb_push(skb, 2));
/* add a zero-length EEM packet, if needed */
if (padlen)
}
/* validate CRC */
- crc = get_unaligned_le32(skb->data + len - ETH_FCS_LEN);
if (header & BIT(14)) {
crc = get_unaligned_le32(skb->data + len
- ETH_FCS_LEN);
#if defined USB_ETH_RNDIS
# undef USB_ETH_RNDIS
#endif
-#ifdef CONFIG_USB_ETH_RNDIS
+#ifdef CONFIG_USB_G_MULTI_RNDIS
# define USB_ETH_RNDIS y
#endif
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/err.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
hsotg->gadget.dev.driver = NULL;
return ret;
}
+EXPORT_SYMBOL(usb_gadget_register_driver);
int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
{
if (hostpc_reg) {
u32 t3;
+ spin_unlock_irq(&ehci->lock);
msleep(5);/* 5ms for HCD enter low pwr mode */
+ spin_lock_irq(&ehci->lock);
t3 = ehci_readl(ehci, hostpc_reg);
ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg);
t3 = ehci_readl(ehci, hostpc_reg);
if ((temp & PORT_PE) == 0
|| (temp & PORT_RESET) != 0)
goto error;
- ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
+
/* After above check the port must be connected.
* Set appropriate bit thus could put phy into low power
* mode if we have hostpc feature
*/
+ temp &= ~PORT_WKCONN_E;
+ temp |= PORT_WKDISC_E | PORT_WKOC_E;
+ ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
if (hostpc_reg) {
- temp &= ~PORT_WKCONN_E;
- temp |= (PORT_WKDISC_E | PORT_WKOC_E);
- ehci_writel(ehci, temp | PORT_SUSPEND,
- status_reg);
+ spin_unlock_irqrestore(&ehci->lock, flags);
msleep(5);/* 5ms for HCD enter low pwr mode */
+ spin_lock_irqsave(&ehci->lock, flags);
temp1 = ehci_readl(ehci, hostpc_reg);
ehci_writel(ehci, temp1 | HOSTPC_PHCD,
hostpc_reg);
if (ep->td_base)
cpm_muram_free(cpm_muram_offset(ep->td_base));
- if (ep->conf_frame_Q) {
+ if (kfifo_initialized(&ep->conf_frame_Q)) {
size = cq_howmany(&ep->conf_frame_Q);
for (; size; size--) {
struct packet *pkt = cq_get(&ep->conf_frame_Q);
cq_delete(&ep->conf_frame_Q);
}
- if (ep->empty_frame_Q) {
+ if (kfifo_initialized(&ep->empty_frame_Q)) {
size = cq_howmany(&ep->empty_frame_Q);
for (; size; size--) {
struct packet *pkt = cq_get(&ep->empty_frame_Q);
cq_delete(&ep->empty_frame_Q);
}
- if (ep->dummy_packets_Q) {
+ if (kfifo_initialized(&ep->dummy_packets_Q)) {
size = cq_howmany(&ep->dummy_packets_Q);
for (; size; size--) {
u8 *buff = cq_get(&ep->dummy_packets_Q);
{ USB_DEVICE(0x0711, 0x0902) },
{ USB_DEVICE(0x0711, 0x0903) },
{ USB_DEVICE(0x0711, 0x0918) },
+ { USB_DEVICE(0x0711, 0x0920) },
{ USB_DEVICE(0x182d, 0x021c) },
{ USB_DEVICE(0x182d, 0x0269) },
{ }
config USB_ULPI
bool "Generic ULPI Transceiver Driver"
depends on ARM
+ select USB_OTG_UTILS
help
Enable this to support ULPI connected USB OTG transceivers which
are likely found on embedded boards.
* Version Information
*/
#define DRIVER_VERSION "v1.5.0"
-#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>"
+#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr"
#define DRIVER_DESC "USB FTDI Serial Converters Driver"
static int debug;
+/*
+ * Device ID not listed? Test via module params product/vendor or
+ * /sys/bus/usb/ftdi_sio/new_id, then send patch/report!
+ */
static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
/*
- * Due to many user requests for multiple ELV devices we enable
- * them by default.
+ * ELV devices:
*/
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) },
{ USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) },
{ USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) },
{ USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
+ { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
/* www.candapter.com Ewert Energy Systems CANdapter device */
#define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */
+#define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */
+
/* OOCDlink by Joern Kaipf <joernk@web.de>
* (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */
#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
/*
* ELV USB devices submitted by Christian Abt of ELV (www.elv.de).
* All of these devices use FTDI's vendor ID (0x0403).
+ * Further IDs taken from ELV Windows .inf file.
*
* The previously included PID for the UO 100 module was incorrect.
* In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58).
*
* Armin Laeuger originally sent the PID for the UM 100 module.
*/
+#define FTDI_ELV_USR_PID 0xE000 /* ELV Universal-Sound-Recorder */
+#define FTDI_ELV_MSM1_PID 0xE001 /* ELV Mini-Sound-Modul */
+#define FTDI_ELV_KL100_PID 0xE002 /* ELV Kfz-Leistungsmesser KL 100 */
+#define FTDI_ELV_WS550_PID 0xE004 /* WS 550 */
+#define FTDI_ELV_EC3000_PID 0xE006 /* ENERGY CONTROL 3000 USB */
+#define FTDI_ELV_WS888_PID 0xE008 /* WS 888 */
+#define FTDI_ELV_TWS550_PID 0xE009 /* Technoline WS 550 */
+#define FTDI_ELV_FEM_PID 0xE00A /* Funk Energie Monitor */
#define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */
#define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */
#define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */
+#define FTDI_ELV_UMS100_PID 0xE0EB /* ELV USB Master-Slave Schaltsteckdose UMS 100 */
+#define FTDI_ELV_TFD128_PID 0xE0EC /* ELV Temperatur-Feuchte-Datenlogger TFD 128 */
+#define FTDI_ELV_FM3RX_PID 0xE0ED /* ELV Messwertuebertragung FM3 RX */
+#define FTDI_ELV_WS777_PID 0xE0EE /* Conrad WS 777 */
#define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */
#define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */
#define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */
#define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */
#define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */
#define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */
+#define FTDI_ELV_UTP8_PID 0xE0F5 /* ELV UTP 8 */
#define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */
+#define FTDI_ELV_WS444PC_PID 0xE0F7 /* Conrad WS 444 PC */
#define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */
#define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */
#define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */
#define PAPOUCH_VID 0x5050 /* Vendor ID */
#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */
#define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */
+#define PAPOUCH_AD4USB_PID 0x8003 /* AD4USB Measurement Module */
/*
* Marvell SheevaPlug
{ USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
+ { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */
{ }
};
UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133,
"Microtech",
"USB-SCSI-DB25",
- US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init,
+ US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init,
US_FL_SCM_MULT_TARG ),
UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100,
inode->i_ino, orig_offset);
BUG_ON(ret);
}
- fi = btrfs_item_ptr(leaf, path->slots[0],
- struct btrfs_file_extent_item);
if (del_nr == 0) {
+ fi = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_file_extent_item);
btrfs_set_file_extent_type(leaf, fi,
BTRFS_FILE_EXTENT_REG);
btrfs_mark_buffer_dirty(leaf);
} else {
+ fi = btrfs_item_ptr(leaf, del_slot - 1,
+ struct btrfs_file_extent_item);
btrfs_set_file_extent_type(leaf, fi,
BTRFS_FILE_EXTENT_REG);
btrfs_set_file_extent_num_bytes(leaf, fi,
data->res.fattr = &data->fattr;
data->res.eof = 0;
data->res.count = bytes;
+ nfs_fattr_init(&data->fattr);
msg.rpc_argp = &data->args;
msg.rpc_resp = &data->res;
data->res.count = 0;
data->res.fattr = &data->fattr;
data->res.verf = &data->verf;
+ nfs_fattr_init(&data->fattr);
NFS_PROTO(data->inode)->commit_setup(data, &msg);
data->res.fattr = &data->fattr;
data->res.count = bytes;
data->res.verf = &data->verf;
+ nfs_fattr_init(&data->fattr);
task_setup_data.task = &data->task;
task_setup_data.callback_data = data;
args.objectid = key->on_disk_key.k_objectid;
args.dirid = key->on_disk_key.k_dir_id;
+ reiserfs_write_unlock(s);
inode = iget5_locked(s, key->on_disk_key.k_objectid,
reiserfs_find_actor, reiserfs_init_locked_inode,
(void *)(&args));
+ reiserfs_write_lock(s);
if (!inode)
return ERR_PTR(-ENOMEM);
if (!sd_attrs)
return -ENOMEM;
sd->s_iattr = sd_attrs;
- } else {
- /* attributes were changed at least once in past */
- iattrs = &sd_attrs->ia_iattr;
-
- if (ia_valid & ATTR_UID)
- iattrs->ia_uid = iattr->ia_uid;
- if (ia_valid & ATTR_GID)
- iattrs->ia_gid = iattr->ia_gid;
- if (ia_valid & ATTR_ATIME)
- iattrs->ia_atime = iattr->ia_atime;
- if (ia_valid & ATTR_MTIME)
- iattrs->ia_mtime = iattr->ia_mtime;
- if (ia_valid & ATTR_CTIME)
- iattrs->ia_ctime = iattr->ia_ctime;
- if (ia_valid & ATTR_MODE) {
- umode_t mode = iattr->ia_mode;
- iattrs->ia_mode = sd->s_mode = mode;
- }
+ }
+ /* attributes were changed at least once in past */
+ iattrs = &sd_attrs->ia_iattr;
+
+ if (ia_valid & ATTR_UID)
+ iattrs->ia_uid = iattr->ia_uid;
+ if (ia_valid & ATTR_GID)
+ iattrs->ia_gid = iattr->ia_gid;
+ if (ia_valid & ATTR_ATIME)
+ iattrs->ia_atime = iattr->ia_atime;
+ if (ia_valid & ATTR_MTIME)
+ iattrs->ia_mtime = iattr->ia_mtime;
+ if (ia_valid & ATTR_CTIME)
+ iattrs->ia_ctime = iattr->ia_ctime;
+ if (ia_valid & ATTR_MODE) {
+ umode_t mode = iattr->ia_mode;
+ iattrs->ia_mode = sd->s_mode = mode;
}
return 0;
}
return bp->attr.bp_type;
}
-static inline int hw_breakpoint_len(struct perf_event *bp)
+static inline unsigned long hw_breakpoint_len(struct perf_event *bp)
{
return bp->attr.bp_len;
}
*/
static inline bool kfifo_initialized(struct kfifo *fifo)
{
- return fifo->buffer != 0;
+ return fifo->buffer != NULL;
}
/**
__u32 wakeup_watermark; /* bytes before wakeup */
};
- __u32 __reserved_2;
-
- __u64 bp_addr;
__u32 bp_type;
- __u32 bp_len;
+ __u64 bp_addr;
+ __u64 bp_len;
};
/*
int modify_user_hw_breakpoint(struct perf_event *bp, struct perf_event_attr *attr)
{
u64 old_addr = bp->attr.bp_addr;
+ u64 old_len = bp->attr.bp_len;
int old_type = bp->attr.bp_type;
- int old_len = bp->attr.bp_len;
int err = 0;
perf_event_disable(bp);
buffer = kmalloc(size, gfp_mask);
if (!buffer) {
- _kfifo_init(fifo, 0, 0);
+ _kfifo_init(fifo, NULL, 0);
return -ENOMEM;
}
void kfifo_free(struct kfifo *fifo)
{
kfree(fifo->buffer);
+ _kfifo_init(fifo, NULL, 0);
}
EXPORT_SYMBOL(kfifo_free);
if (attr->type >= PERF_TYPE_MAX)
return -EINVAL;
- if (attr->__reserved_1 || attr->__reserved_2)
+ if (attr->__reserved_1)
return -EINVAL;
if (attr->sample_type & ~(PERF_SAMPLE_MAX-1))
*/
/*
- * The trampoline is called when the hrtimer expires. If this is
- * called from the hrtimer interrupt then we schedule the tasklet as
- * the timer callback function expects to run in softirq context. If
- * it's called in softirq context anyway (i.e. high resolution timers
- * disabled) then the hrtimer callback is called right away.
+ * The trampoline is called when the hrtimer expires. It schedules a tasklet
+ * to run __tasklet_hrtimer_trampoline() which in turn will call the intended
+ * hrtimer callback, but from softirq context.
*/
static enum hrtimer_restart __hrtimer_tasklet_trampoline(struct hrtimer *timer)
{
struct tasklet_hrtimer *ttimer =
container_of(timer, struct tasklet_hrtimer, timer);
- if (hrtimer_is_hres_active(timer)) {
- tasklet_hi_schedule(&ttimer->tasklet);
- return HRTIMER_NORESTART;
- }
- return ttimer->function(timer);
+ tasklet_hi_schedule(&ttimer->tasklet);
+ return HRTIMER_NORESTART;
}
/*
return -EINVAL;
}
/* an address specified */
- ret = strict_strtoul(&argv[0][2], 0, (unsigned long *)&addr);
+ ret = strict_strtoul(&argv[1][0], 0, (unsigned long *)&addr);
if (ret) {
pr_info("Failed to parse address.\n");
return ret;
unsigned long val, flags;
char buf[64];
int ret;
+ int cpu;
if (count >= sizeof(buf))
return -EINVAL;
return ret;
local_irq_save(flags);
+
+ /*
+ * In case we trace inside arch_spin_lock() or after (NMI),
+ * we will cause circular lock, so we also need to increase
+ * the percpu trace_active here.
+ */
+ cpu = smp_processor_id();
+ per_cpu(trace_active, cpu)++;
+
arch_spin_lock(&max_stack_lock);
*ptr = val;
arch_spin_unlock(&max_stack_lock);
+
+ per_cpu(trace_active, cpu)--;
local_irq_restore(flags);
return count;
static void *t_start(struct seq_file *m, loff_t *pos)
{
+ int cpu;
+
local_irq_disable();
+
+ cpu = smp_processor_id();
+ per_cpu(trace_active, cpu)++;
+
arch_spin_lock(&max_stack_lock);
if (*pos == 0)
static void t_stop(struct seq_file *m, void *p)
{
+ int cpu;
+
arch_spin_unlock(&max_stack_lock);
+
+ cpu = smp_processor_id();
+ per_cpu(trace_active, cpu)--;
+
local_irq_enable();
}
case ETHTOOL_GPERMADDR:
case ETHTOOL_GUFO:
case ETHTOOL_GGSO:
+ case ETHTOOL_GGRO:
case ETHTOOL_GFLAGS:
case ETHTOOL_GPFLAGS:
case ETHTOOL_GRXFH:
break;
case IGMP_HOST_MEMBERSHIP_REPORT:
case IGMPV2_HOST_MEMBERSHIP_REPORT:
- case IGMPV3_HOST_MEMBERSHIP_REPORT:
/* Is it our report looped back? */
if (skb_rtable(skb)->fl.iif == 0)
break;
in_dev_put(in_dev);
return pim_rcv_v1(skb);
#endif
+ case IGMPV3_HOST_MEMBERSHIP_REPORT:
case IGMP_DVMRP:
case IGMP_TRACE:
case IGMP_HOST_LEAVE_MESSAGE:
if (x->props.mode == XFRM_MODE_TUNNEL) {
err = ipcomp_tunnel_attach(x);
if (err)
- goto error_tunnel;
+ goto out;
}
err = 0;
out:
return err;
-
-error_tunnel:
- ipcomp_destroy(x);
- goto out;
}
static const struct xfrm_type ipcomp_type = {
/* tcp_ack considers this ACK as duplicate
* and does not calculate rtt.
- * Fix it at least with timestamps.
+ * Force it here.
*/
- if (tp->rx_opt.saw_tstamp &&
- tp->rx_opt.rcv_tsecr && !tp->srtt)
- tcp_ack_saw_tstamp(sk, 0);
+ tcp_ack_update_rtt(sk, 0, 0);
if (tp->rx_opt.tstamp_ok)
tp->advmss -= TCPOLEN_TSTAMP_ALIGNED;
if (x->props.mode == XFRM_MODE_TUNNEL) {
err = ipcomp6_tunnel_attach(x);
if (err)
- goto error_tunnel;
+ goto out;
}
err = 0;
out:
return err;
-error_tunnel:
- ipcomp_destroy(x);
-
- goto out;
}
static const struct xfrm_type ipcomp6_type =
}
if (pos[1] != 0 &&
(pos[1] != ifibss->ssid_len ||
- !memcmp(pos + 2, ifibss->ssid, ifibss->ssid_len))) {
+ memcmp(pos + 2, ifibss->ssid, ifibss->ssid_len))) {
/* Ignore ProbeReq for foreign SSID */
return;
}
info->control.rates[i].count = 1;
}
+ if (sdata->local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL)
+ return;
+
if (sta && sdata->force_unicast_rateidx > -1) {
info->control.rates[0].idx = sdata->force_unicast_rateidx;
} else {
if (local->scan_req)
return -EBUSY;
+ if (req != local->int_scan_req &&
+ sdata->vif.type == NL80211_IFTYPE_STATION &&
+ !list_empty(&ifmgd->work_list)) {
+ /* actually wait for the work it's doing to finish/time out */
+ set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request);
+ local->scan_req = req;
+ local->scan_sdata = sdata;
+ return 0;
+ }
+
if (local->ops->hw_scan) {
u8 *ies;
local->scan_req = req;
local->scan_sdata = sdata;
- if (req != local->int_scan_req &&
- sdata->vif.type == NL80211_IFTYPE_STATION &&
- !list_empty(&ifmgd->work_list)) {
- /* actually wait for the work it's doing to finish/time out */
- set_bit(IEEE80211_STA_REQ_SCAN, &ifmgd->request);
- return 0;
- }
-
if (local->ops->hw_scan)
__set_bit(SCAN_HW_SCANNING, &local->scanning);
else
int err = -ENOMEM;
struct xfrm_state *x = xfrm_state_alloc(net);
if (!x)
- goto error;
+ goto out;
memcpy(&x->id, &orig->id, sizeof(x->id));
memcpy(&x->sel, &orig->sel, sizeof(x->sel));
return x;
error:
+ xfrm_state_put(x);
+out:
if (errp)
*errp = err;
- if (x) {
- kfree(x->aalg);
- kfree(x->ealg);
- kfree(x->calg);
- kfree(x->encap);
- kfree(x->coaddr);
- }
- kfree(x);
return NULL;
}
*/
static struct snd_pci_quirk msi_black_list[] __devinitdata = {
SND_PCI_QUIRK(0x1043, 0x81f2, "ASUS", 0), /* Athlon64 X2 + nvidia */
- SND_PCI_QUIRK(0x1043, 0x829c, "ASUS", 0), /* nvidia */
+ SND_PCI_QUIRK(0x1043, 0x81f6, "ASUS", 0), /* nvidia */
{}
};
fprintf(stdout, "\t[w] toggle display weighted/count[E]r. \t(%d)\n", display_weighted ? 1 : 0);
fprintf(stdout,
- "\t[K] hide kernel_symbols symbols. \t(%s)\n",
+ "\t[K] hide kernel_symbols symbols. \t(%s)\n",
hide_kernel_symbols ? "yes" : "no");
fprintf(stdout,
"\t[U] hide user symbols. \t(%s)\n",
al->thread = self;
al->addr = addr;
- if (cpumode & PERF_RECORD_MISC_KERNEL) {
+ if (cpumode == PERF_RECORD_MISC_KERNEL) {
al->level = 'k';
mg = &session->kmaps;
- } else if (cpumode & PERF_RECORD_MISC_USER)
+ } else if (cpumode == PERF_RECORD_MISC_USER)
al->level = '.';
else {
al->level = 'H';
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff