if (WARN_ON(!tid_tx))
return -ENOENT;
+ if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) {
+ /* not even started yet! */
+ rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], NULL);
+ call_rcu(&tid_tx->rcu_head, kfree_tid_tx);
+ return 0;
+ }
+
#ifdef CONFIG_MAC80211_HT_DEBUG
printk(KERN_DEBUG "Tx BA session stop requested for %pM tid %u\n",
sta->sta.addr, tid);
__release(agg_queue);
}
+static void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
+{
+ struct tid_ampdu_tx *tid_tx = sta->ampdu_mlme.tid_tx[tid];
+ struct ieee80211_local *local = sta->local;
+ struct ieee80211_sub_if_data *sdata = sta->sdata;
+ u16 start_seq_num;
+ int ret;
+
+ /*
+ * While we're asking the driver about the aggregation,
+ * stop the AC queue so that we don't have to worry
+ * about frames that came in while we were doing that,
+ * which would require us to put them to the AC pending
+ * afterwards which just makes the code more complex.
+ */
+ ieee80211_stop_queue_agg(local, tid);
+
+ clear_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
+
+ /*
+ * This might be off by one due to a race that we can't
+ * really prevent here without synchronize_net() which
+ * can't be called now.
+ */
+ start_seq_num = sta->tid_seq[tid] >> 4;
+
+ ret = drv_ampdu_action(local, sdata, IEEE80211_AMPDU_TX_START,
+ &sta->sta, tid, &start_seq_num);
+ if (ret) {
+#ifdef CONFIG_MAC80211_HT_DEBUG
+ printk(KERN_DEBUG "BA request denied - HW unavailable for"
+ " tid %d\n", tid);
+#endif
+ rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], NULL);
+ ieee80211_wake_queue_agg(local, tid);
+ call_rcu(&tid_tx->rcu_head, kfree_tid_tx);
+ return;
+ }
+
+ /* we can take packets again now */
+ ieee80211_wake_queue_agg(local, tid);
+
+ /* activate the timer for the recipient's addBA response */
+ mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL);
+#ifdef CONFIG_MAC80211_HT_DEBUG
+ printk(KERN_DEBUG "activated addBA response timer on tid %d\n", tid);
+#endif
+
+ sta->ampdu_mlme.addba_req_num[tid]++;
+
+ /* send AddBA request */
+ ieee80211_send_addba_request(sdata, sta->sta.addr, tid,
+ tid_tx->dialog_token, start_seq_num,
+ 0x40, 5000);
+}
+
+void ieee80211_tx_ba_session_work(struct work_struct *work)
+{
+ struct sta_info *sta =
+ container_of(work, struct sta_info, ampdu_mlme.work);
+ struct tid_ampdu_tx *tid_tx;
+ int tid;
+
+ /*
+ * When this flag is set, new sessions should be
+ * blocked, and existing sessions will be torn
+ * down by the code that set the flag, so this
+ * need not run.
+ */
+ if (test_sta_flags(sta, WLAN_STA_BLOCK_BA))
+ return;
+
+ spin_lock_bh(&sta->lock);
+ for (tid = 0; tid < STA_TID_NUM; tid++) {
+ tid_tx = sta->ampdu_mlme.tid_tx[tid];
+ if (!tid_tx)
+ continue;
+
+ if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state))
+ ieee80211_tx_ba_session_handle_start(sta, tid);
+ else if (test_and_clear_bit(HT_AGG_STATE_WANT_STOP,
+ &tid_tx->state))
+ ___ieee80211_stop_tx_ba_session(sta, tid,
+ WLAN_BACK_INITIATOR);
+ }
+ spin_unlock_bh(&sta->lock);
+}
+
int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid)
{
struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
struct ieee80211_local *local = sdata->local;
struct tid_ampdu_tx *tid_tx;
int ret = 0;
- u16 start_seq_num;
trace_api_start_tx_ba_session(pubsta, tid);
goto err_unlock_sta;
}
- /*
- * While we're asking the driver about the aggregation,
- * stop the AC queue so that we don't have to worry
- * about frames that came in while we were doing that,
- * which would require us to put them to the AC pending
- * afterwards which just makes the code more complex.
- */
- ieee80211_stop_queue_agg(local, tid);
-
/* prepare A-MPDU MLME for Tx aggregation */
tid_tx = kzalloc(sizeof(struct tid_ampdu_tx), GFP_ATOMIC);
if (!tid_tx) {
tid);
#endif
ret = -ENOMEM;
- goto err_wake_queue;
+ goto err_unlock_sta;
}
skb_queue_head_init(&tid_tx->pending);
+ __set_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
/* Tx timer */
tid_tx->addba_resp_timer.function = sta_addba_resp_timer_expired;
tid_tx->addba_resp_timer.data = (unsigned long)&sta->timer_to_tid[tid];
init_timer(&tid_tx->addba_resp_timer);
- start_seq_num = sta->tid_seq[tid] >> 4;
-
- ret = drv_ampdu_action(local, sdata, IEEE80211_AMPDU_TX_START,
- pubsta, tid, &start_seq_num);
- if (ret) {
-#ifdef CONFIG_MAC80211_HT_DEBUG
- printk(KERN_DEBUG "BA request denied - HW unavailable for"
- " tid %d\n", tid);
-#endif /* CONFIG_MAC80211_HT_DEBUG */
- goto err_free;
- }
-
- rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], tid_tx);
-
- /* Driver vetoed or OKed, but we can take packets again now */
- ieee80211_wake_queue_agg(local, tid);
-
- /* activate the timer for the recipient's addBA response */
- tid_tx->addba_resp_timer.expires = jiffies + ADDBA_RESP_INTERVAL;
- add_timer(&tid_tx->addba_resp_timer);
-#ifdef CONFIG_MAC80211_HT_DEBUG
- printk(KERN_DEBUG "activated addBA response timer on tid %d\n", tid);
-#endif
-
- /* prepare tid data */
+ /* assign a dialog token */
sta->ampdu_mlme.dialog_token_allocator++;
tid_tx->dialog_token = sta->ampdu_mlme.dialog_token_allocator;
- tid_tx->ssn = start_seq_num;
-
- sta->ampdu_mlme.addba_req_num[tid]++;
- spin_unlock_bh(&sta->lock);
+ /* finally, assign it to the array */
+ rcu_assign_pointer(sta->ampdu_mlme.tid_tx[tid], tid_tx);
- /* send AddBA request */
- ieee80211_send_addba_request(sdata, pubsta->addr, tid,
- tid_tx->dialog_token, tid_tx->ssn,
- 0x40, 5000);
- return 0;
+ ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work);
- err_free:
- kfree(tid_tx);
- err_wake_queue:
- ieee80211_wake_queue_agg(local, tid);
+ /* this flow continues off the work */
err_unlock_sta:
spin_unlock_bh(&sta->lock);
return ret;
spin_lock_bh(&sta->lock);
tid_tx = sta->ampdu_mlme.tid_tx[tid];
- /* check if the TID is in aggregation */
- if (!tid_tx || !test_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state)) {
+ if (!tid_tx) {
ret = -ENOENT;
goto unlock;
}
struct sta_info *sta = container_of(pubsta, struct sta_info, sta);
struct ieee80211_sub_if_data *sdata = sta->sdata;
struct ieee80211_local *local = sdata->local;
+ struct tid_ampdu_tx *tid_tx;
+ int ret = 0;
trace_api_stop_tx_ba_session(pubsta, tid);
if (tid >= STA_TID_NUM)
return -EINVAL;
- return __ieee80211_stop_tx_ba_session(sta, tid, WLAN_BACK_INITIATOR);
+ spin_lock_bh(&sta->lock);
+ tid_tx = sta->ampdu_mlme.tid_tx[tid];
+
+ if (!tid_tx) {
+ ret = -ENOENT;
+ goto unlock;
+ }
+
+ if (test_bit(HT_AGG_STATE_STOPPING, &tid_tx->state)) {
+ /* already in progress stopping it */
+ ret = 0;
+ goto unlock;
+ }
+
+ set_bit(HT_AGG_STATE_WANT_STOP, &tid_tx->state);
+ ieee80211_queue_work(&local->hw, &sta->ampdu_mlme.work);
+
+ unlock:
+ spin_unlock_bh(&sta->lock);
+ return ret;
}
EXPORT_SYMBOL(ieee80211_stop_tx_ba_session);
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff