#include <asm/oplib.h>
#include <asm/prom.h>
#include <asm/pcic.h>
+#include <asm/timex.h>
#include <asm/timer.h>
#include <asm/uaccess.h>
#include <asm/irq_regs.h>
volatile int pcic_speculative;
volatile int pcic_trapped;
-static void pci_do_gettimeofday(struct timeval *tv);
-static int pci_do_settimeofday(struct timespec *tv);
#define CONFIG_CMD(bus, device_fn, where) (0x80000000 | (((unsigned int)bus) << 16) | (((unsigned int)device_fn) << 8) | (where & ~3))
#define USECS_PER_JIFFY 10000 /* We have 100HZ "standard" timer for sparc */
#define TICK_TIMER_LIMIT ((100*1000000/4)/100)
+u32 pci_gettimeoffset(void)
+{
+ /*
+ * We divide all by 100
+ * to have microsecond resolution and to avoid overflow
+ */
+ unsigned long count =
+ readl(pcic0.pcic_regs+PCI_SYS_COUNTER) & ~PCI_SYS_COUNTER_OVERFLOW;
+ count = ((count/100)*USECS_PER_JIFFY) / (TICK_TIMER_LIMIT/100);
+ return count * 1000;
+}
+
+
void __init pci_time_init(void)
{
struct linux_pcic *pcic = &pcic0;
unsigned long v;
int timer_irq, irq;
- /* A hack until do_gettimeofday prototype is moved to arch specific headers
- and btfixupped. Patch do_gettimeofday with ba pci_do_gettimeofday; nop */
- ((unsigned int *)do_gettimeofday)[0] =
- 0x10800000 | ((((unsigned long)pci_do_gettimeofday -
- (unsigned long)do_gettimeofday) >> 2) & 0x003fffff);
- ((unsigned int *)do_gettimeofday)[1] = 0x01000000;
- BTFIXUPSET_CALL(bus_do_settimeofday, pci_do_settimeofday, BTFIXUPCALL_NORM);
+ do_arch_gettimeoffset = pci_gettimeoffset;
+
btfixup();
writel (TICK_TIMER_LIMIT, pcic->pcic_regs+PCI_SYS_LIMIT);
local_irq_enable();
}
-static inline unsigned long do_gettimeoffset(void)
-{
- /*
- * We divide all by 100
- * to have microsecond resolution and to avoid overflow
- */
- unsigned long count =
- readl(pcic0.pcic_regs+PCI_SYS_COUNTER) & ~PCI_SYS_COUNTER_OVERFLOW;
- count = ((count/100)*USECS_PER_JIFFY) / (TICK_TIMER_LIMIT/100);
- return count;
-}
-
-static void pci_do_gettimeofday(struct timeval *tv)
-{
- unsigned long flags;
- unsigned long seq;
- unsigned long usec, sec;
- unsigned long max_ntp_tick = tick_usec - tickadj;
-
- do {
- seq = read_seqbegin_irqsave(&xtime_lock, flags);
- usec = do_gettimeoffset();
-
- /*
- * If time_adjust is negative then NTP is slowing the clock
- * so make sure not to go into next possible interval.
- * Better to lose some accuracy than have time go backwards..
- */
- if (unlikely(time_adjust < 0))
- usec = min(usec, max_ntp_tick);
-
- sec = xtime.tv_sec;
- usec += (xtime.tv_nsec / 1000);
- } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
- while (usec >= 1000000) {
- usec -= 1000000;
- sec++;
- }
-
- tv->tv_sec = sec;
- tv->tv_usec = usec;
-}
-
-static int pci_do_settimeofday(struct timespec *tv)
-{
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- /*
- * This is revolting. We need to set "xtime" correctly. However, the
- * value in this location is the value at the most recent update of
- * wall time. Discover what correction gettimeofday() would have
- * made, and then undo it!
- */
- tv->tv_nsec -= 1000 * do_gettimeoffset();
- while (tv->tv_nsec < 0) {
- tv->tv_nsec += NSEC_PER_SEC;
- tv->tv_sec--;
- }
-
- wall_to_monotonic.tv_sec += xtime.tv_sec - tv->tv_sec;
- wall_to_monotonic.tv_nsec += xtime.tv_nsec - tv->tv_nsec;
-
- if (wall_to_monotonic.tv_nsec > NSEC_PER_SEC) {
- wall_to_monotonic.tv_nsec -= NSEC_PER_SEC;
- wall_to_monotonic.tv_sec++;
- }
- if (wall_to_monotonic.tv_nsec < 0) {
- wall_to_monotonic.tv_nsec += NSEC_PER_SEC;
- wall_to_monotonic.tv_sec--;
- }
-
- xtime.tv_sec = tv->tv_sec;
- xtime.tv_nsec = tv->tv_nsec;
- ntp_clear();
- return 0;
-}
#if 0
static void watchdog_reset() {
#include <linux/platform_device.h>
#include <asm/oplib.h>
+#include <asm/timex.h>
#include <asm/timer.h>
#include <asm/system.h>
#include <asm/irq.h>
EXPORT_SYMBOL(rtc_lock);
static int set_rtc_mmss(unsigned long);
-static int sbus_do_settimeofday(struct timespec *tv);
unsigned long profile_pc(struct pt_regs *regs)
{
__volatile__ unsigned int *master_l10_counter;
+u32 (*do_arch_gettimeoffset)(void);
+
/*
* timer_interrupt() needs to keep up the real-time clock,
* as well as call the "do_timer()" routine every clocktick
{
return of_register_driver(&clock_driver, &of_platform_bus_type);
}
-
/* Must be after subsys_initcall() so that busses are probed. Must
* be before device_initcall() because things like the RTC driver
* need to see the clock registers.
*/
fs_initcall(clock_init);
-static void __init sbus_time_init(void)
-{
-
- BTFIXUPSET_CALL(bus_do_settimeofday, sbus_do_settimeofday, BTFIXUPCALL_NORM);
- btfixup();
-
- sparc_init_timers(timer_interrupt);
-}
-
-void __init time_init(void)
-{
-#ifdef CONFIG_PCI
- extern void pci_time_init(void);
- if (pcic_present()) {
- pci_time_init();
- return;
- }
-#endif
- sbus_time_init();
-}
-static inline unsigned long do_gettimeoffset(void)
+u32 sbus_do_gettimeoffset(void)
{
unsigned long val = *master_l10_counter;
unsigned long usec = (val >> 10) & 0x1fffff;
if (val & 0x80000000)
usec += 1000000 / HZ;
- return usec;
+ return usec * 1000;
}
-/* Ok, my cute asm atomicity trick doesn't work anymore.
- * There are just too many variables that need to be protected
- * now (both members of xtime, et al.)
- */
-void do_gettimeofday(struct timeval *tv)
-{
- unsigned long flags;
- unsigned long seq;
- unsigned long usec, sec;
- unsigned long max_ntp_tick = tick_usec - tickadj;
-
- do {
- seq = read_seqbegin_irqsave(&xtime_lock, flags);
- usec = do_gettimeoffset();
-
- /*
- * If time_adjust is negative then NTP is slowing the clock
- * so make sure not to go into next possible interval.
- * Better to lose some accuracy than have time go backwards..
- */
- if (unlikely(time_adjust < 0))
- usec = min(usec, max_ntp_tick);
-
- sec = xtime.tv_sec;
- usec += (xtime.tv_nsec / 1000);
- } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
- while (usec >= 1000000) {
- usec -= 1000000;
- sec++;
- }
- tv->tv_sec = sec;
- tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
+u32 arch_gettimeoffset(void)
{
- int ret;
-
- write_seqlock_irq(&xtime_lock);
- ret = bus_do_settimeofday(tv);
- write_sequnlock_irq(&xtime_lock);
- clock_was_set();
- return ret;
+ if (unlikely(!do_arch_gettimeoffset))
+ return 0;
+ return do_arch_gettimeoffset();
}
-EXPORT_SYMBOL(do_settimeofday);
-
-static int sbus_do_settimeofday(struct timespec *tv)
+static void __init sbus_time_init(void)
{
- time_t wtm_sec, sec = tv->tv_sec;
- long wtm_nsec, nsec = tv->tv_nsec;
+ do_arch_gettimeoffset = sbus_do_gettimeoffset;
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- /*
- * This is revolting. We need to set "xtime" correctly. However, the
- * value in this location is the value at the most recent update of
- * wall time. Discover what correction gettimeofday() would have
- * made, and then undo it!
- */
- nsec -= 1000 * do_gettimeoffset();
-
- wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
- wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
+ btfixup();
- set_normalized_timespec(&xtime, sec, nsec);
- set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
+ sparc_init_timers(timer_interrupt);
+}
- ntp_clear();
- return 0;
+void __init time_init(void)
+{
+#ifdef CONFIG_PCI
+ extern void pci_time_init(void);
+ if (pcic_present()) {
+ pci_time_init();
+ return;
+ }
+#endif
+ sbus_time_init();
}
+
static int set_rtc_mmss(unsigned long secs)
{
struct rtc_device *rtc = rtc_class_open("rtc0");
git://bbs.cooldavid.org / net-next-2.6.git / commitdiff