-/* Different command packet have dedicated message length and definition. */
-#define CMPK_RX_TX_FB_SIZE sizeof(cmpk_txfb_t) //20
-#define CMPK_TX_SET_CONFIG_SIZE sizeof(cmpk_set_cfg_t) //16
-#define CMPK_BOTH_QUERY_CONFIG_SIZE sizeof(cmpk_set_cfg_t) //16
-#define CMPK_RX_TX_STS_SIZE sizeof(cmpk_tx_status_t)//
-#define CMPK_RX_DBG_MSG_SIZE sizeof(cmpk_rx_dbginfo_t)//
-#define CMPK_TX_RAHIS_SIZE sizeof(cmpk_tx_rahis_t)
-
-/* 2008/05/08 amy For USB constant. */
-#define ISR_TxBcnOk BIT27 // Transmit Beacon OK
-#define ISR_TxBcnErr BIT26 // Transmit Beacon Error
-#define ISR_BcnTimerIntr BIT13 // Beacon Timer Interrupt
-
-/* Define element ID of command packet. */
-
-/*------------------------------Define structure----------------------------*/
-/* Define different command packet structure. */
-/* 1. RX side: TX feedback packet. */
-typedef struct tag_cmd_pkt_tx_feedback
-{
- // DWORD 0
- u8 element_id; /* Command packet type. */
- u8 length; /* Command packet length. */
- /* 2007/07/05 MH Change tx feedback info field. */
- /*------TX Feedback Info Field */
- u8 TID:4; /* */
- u8 fail_reason:3; /* */
- u8 tok:1; /* Transmit ok. */
- u8 reserve1:4; /* */
- u8 pkt_type:2; /* */
- u8 bandwidth:1; /* */
- u8 qos_pkt:1; /* */
-
- // DWORD 1
- u8 reserve2; /* */
- /*------TX Feedback Info Field */
- u8 retry_cnt; /* */
- u16 pkt_id; /* */
-
- // DWORD 3
- u16 seq_num; /* */
- u8 s_rate; /* Start rate. */
- u8 f_rate; /* Final rate. */
-
- // DWORD 4
- u8 s_rts_rate; /* */
- u8 f_rts_rate; /* */
- u16 pkt_length; /* */
-
- // DWORD 5
- u16 reserve3; /* */
- u16 duration; /* */
-}cmpk_txfb_t;
-
-/* 2. RX side: Interrupt status packet. It includes Beacon State,
- Beacon Timer Interrupt and other useful informations in MAC ISR Reg. */
-typedef struct tag_cmd_pkt_interrupt_status
-{
- u8 element_id; /* Command packet type. */
- u8 length; /* Command packet length. */
- u16 reserve;
- u32 interrupt_status; /* Interrupt Status. */
-}cmpk_intr_sta_t;
-
-
-/* 3. TX side: Set configuration packet. */
-typedef struct tag_cmd_pkt_set_configuration
-{
- u8 element_id; /* Command packet type. */
- u8 length; /* Command packet length. */
- u16 reserve1; /* */
- u8 cfg_reserve1:3;
- u8 cfg_size:2; /* Configuration info. */
- u8 cfg_type:2; /* Configuration info. */
- u8 cfg_action:1; /* Configuration info. */
- u8 cfg_reserve2; /* Configuration info. */
- u8 cfg_page:4; /* Configuration info. */
- u8 cfg_reserve3:4; /* Configuration info. */
- u8 cfg_offset; /* Configuration info. */
- u32 value; /* */
- u32 mask; /* */
-}cmpk_set_cfg_t;
-
-/* 4. Both side : TX/RX query configuraton packet. The query structure is the
- same as set configuration. */
-#define cmpk_query_cfg_t cmpk_set_cfg_t