+/* LCD power controller */
+static void smdkc100_lcd_power_set(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ /* backlight */
+ gpio_direction_output(S5PC100_GPD(0), power);
+
+ if (power) {
+ /* module reset */
+ gpio_direction_output(S5PC100_GPH0(6), 1);
+ mdelay(100);
+ gpio_direction_output(S5PC100_GPH0(6), 0);
+ mdelay(10);
+ gpio_direction_output(S5PC100_GPH0(6), 1);
+ mdelay(10);
+ }
+}
+
+static struct plat_lcd_data smdkc100_lcd_power_data = {
+ .set_power = smdkc100_lcd_power_set,
+};
+
+static struct platform_device smdkc100_lcd_powerdev = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &smdkc100_lcd_power_data,
+};
+
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdkc100_fb_win0 = {
+ /* this is to ensure we use win0 */
+ .win_mode = {
+ .refresh = 70,
+ .pixclock = (8+13+3+800)*(7+5+1+480),
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+};
+
+static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = {
+ .win[0] = &smdkc100_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .setup_gpio = s5pc100_fb_gpio_setup_24bpp,
+};
+