#include "../rt_config.h"
UCHAR CipherSuiteWpaNoneTkip[] = {
- 0x00, 0x50, 0xf2, 0x01, // oui
- 0x01, 0x00, // Version
- 0x00, 0x50, 0xf2, 0x02, // Multicast
- 0x01, 0x00, // Number of unicast
- 0x00, 0x50, 0xf2, 0x02, // unicast
- 0x01, 0x00, // number of authentication method
- 0x00, 0x50, 0xf2, 0x00 // authentication
+ 0x00, 0x50, 0xf2, 0x01, /* oui */
+ 0x01, 0x00, /* Version */
+ 0x00, 0x50, 0xf2, 0x02, /* Multicast */
+ 0x01, 0x00, /* Number of unicast */
+ 0x00, 0x50, 0xf2, 0x02, /* unicast */
+ 0x01, 0x00, /* number of authentication method */
+ 0x00, 0x50, 0xf2, 0x00 /* authentication */
};
UCHAR CipherSuiteWpaNoneTkipLen =
(sizeof(CipherSuiteWpaNoneTkip) / sizeof(UCHAR));
UCHAR CipherSuiteWpaNoneAes[] = {
- 0x00, 0x50, 0xf2, 0x01, // oui
- 0x01, 0x00, // Version
- 0x00, 0x50, 0xf2, 0x04, // Multicast
- 0x01, 0x00, // Number of unicast
- 0x00, 0x50, 0xf2, 0x04, // unicast
- 0x01, 0x00, // number of authentication method
- 0x00, 0x50, 0xf2, 0x00 // authentication
+ 0x00, 0x50, 0xf2, 0x01, /* oui */
+ 0x01, 0x00, /* Version */
+ 0x00, 0x50, 0xf2, 0x04, /* Multicast */
+ 0x01, 0x00, /* Number of unicast */
+ 0x00, 0x50, 0xf2, 0x04, /* unicast */
+ 0x01, 0x00, /* number of authentication method */
+ 0x00, 0x50, 0xf2, 0x00 /* authentication */
};
UCHAR CipherSuiteWpaNoneAesLen =
(sizeof(CipherSuiteWpaNoneAes) / sizeof(UCHAR));
-// The following MACRO is called after 1. starting an new IBSS, 2. succesfully JOIN an IBSS,
-// or 3. succesfully ASSOCIATE to a BSS, 4. successfully RE_ASSOCIATE to a BSS
-// All settings successfuly negotiated furing MLME state machines become final settings
-// and are copied to pAd->StaActive
+/* The following MACRO is called after 1. starting an new IBSS, 2. succesfully JOIN an IBSS, */
+/* or 3. succesfully ASSOCIATE to a BSS, 4. successfully RE_ASSOCIATE to a BSS */
+/* All settings successfuly negotiated furing MLME state machines become final settings */
+/* and are copied to pAd->StaActive */
#define COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd) \
{ \
NdisZeroMemory((_pAd)->CommonCfg.Ssid, MAX_LEN_OF_SSID); \
VOID MlmeCntlInit(IN PRTMP_ADAPTER pAd,
IN STATE_MACHINE * S, OUT STATE_MACHINE_FUNC Trans[])
{
- // Control state machine differs from other state machines, the interface
- // follows the standard interface
+ /* Control state machine differs from other state machines, the interface */
+ /* follows the standard interface */
pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
}
CntlWaitJoinProc(pAd, Elem);
break;
- // CNTL_WAIT_REASSOC is the only state in CNTL machine that does
- // not triggered directly or indirectly by "RTMPSetInformation(OID_xxx)".
- // Therefore not protected by NDIS's "only one outstanding OID request"
- // rule. Which means NDIS may SET OID in the middle of ROAMing attempts.
- // Current approach is to block new SET request at RTMPSetInformation()
- // when CntlMachine.CurrState is not CNTL_IDLE
+ /* CNTL_WAIT_REASSOC is the only state in CNTL machine that does */
+ /* not triggered directly or indirectly by "RTMPSetInformation(OID_xxx)". */
+ /* Therefore not protected by NDIS's "only one outstanding OID request" */
+ /* rule. Which means NDIS may SET OID in the middle of ROAMing attempts. */
+ /* Current approach is to block new SET request at RTMPSetInformation() */
+ /* when CntlMachine.CurrState is not CNTL_IDLE */
case CNTL_WAIT_REASSOC:
CntlWaitReassocProc(pAd, Elem);
break;
case CNTL_WAIT_OID_LIST_SCAN:
if (Elem->MsgType == MT2_SCAN_CONF) {
- // Resume TxRing after SCANING complete. We hope the out-of-service time
- // won't be too long to let upper layer time-out the waiting frames
+ /* Resume TxRing after SCANING complete. We hope the out-of-service time */
+ /* won't be too long to let upper layer time-out the waiting frames */
RTMPResumeMsduTransmission(pAd);
pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
- //
- // Set LED status to previous status.
- //
+ /* */
+ /* Set LED status to previous status. */
+ /* */
if (pAd->bLedOnScanning) {
pAd->bLedOnScanning = FALSE;
RTMPSetLED(pAd, pAd->LedStatus);
}
break;
#ifdef RTMP_MAC_USB
- //
- // This state is for that we want to connect to an AP but
- // it didn't find on BSS List table. So we need to scan the air first,
- // after that we can try to connect to the desired AP if available.
- //
+ /* */
+ /* This state is for that we want to connect to an AP but */
+ /* it didn't find on BSS List table. So we need to scan the air first, */
+ /* after that we can try to connect to the desired AP if available. */
+ /* */
case CNTL_WAIT_SCAN_FOR_CONNECT:
if (Elem->MsgType == MT2_SCAN_CONF) {
- // Resume TxRing after SCANING complete. We hope the out-of-service time
- // won't be too long to let upper layer time-out the waiting frames
+ /* Resume TxRing after SCANING complete. We hope the out-of-service time */
+ /* won't be too long to let upper layer time-out the waiting frames */
RTMPResumeMsduTransmission(pAd);
#ifdef CCX_SUPPORT
if (pAd->StaCfg.CCXReqType != MSRN_TYPE_UNUSED) {
- // Cisco scan request is finished, prepare beacon report
+ /* Cisco scan request is finished, prepare beacon report */
MlmeEnqueue(pAd, AIRONET_STATE_MACHINE,
MT2_AIRONET_SCAN_DONE, 0, NULL);
}
-#endif // CCX_SUPPORT //
+#endif /* CCX_SUPPORT // */
pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
- //
- // Check if we can connect to.
- //
+ /* */
+ /* Check if we can connect to. */
+ /* */
BssTableSsidSort(pAd, &pAd->MlmeAux.SsidBssTab,
(CHAR *) pAd->MlmeAux.
AutoReconnectSsid,
}
}
break;
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
default:
DBGPRINT_ERR(("!ERROR! CNTL - Illegal message type(=%ld)",
Elem->MsgType));
if (pAd->StaCfg.WpaSupplicantUP !=
WPA_SUPPLICANT_ENABLE_WITH_WEB_UI) {
- // Set the AutoReconnectSsid to prevent it reconnect to old SSID
- // Since calling this indicate user don't want to connect to that SSID anymore.
+ /* Set the AutoReconnectSsid to prevent it reconnect to old SSID */
+ /* Since calling this indicate user don't want to connect to that SSID anymore. */
pAd->MlmeAux.AutoReconnectSsidLen = 32;
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid,
pAd->MlmeAux.AutoReconnectSsidLen);
ULONG BssIdx = BSS_NOT_FOUND;
BSS_ENTRY CurrBss;
- // record current BSS if network is connected.
- // 2003-2-13 do not include current IBSS if this is the only STA in this IBSS.
+ /* record current BSS if network is connected. */
+ /* 2003-2-13 do not include current IBSS if this is the only STA in this IBSS. */
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)) {
BssIdx =
BssSsidTableSearch(&pAd->ScanTab, pAd->CommonCfg.Bssid,
sizeof(BSS_ENTRY));
}
}
- // clean up previous SCAN result, add current BSS back to table if any
+ /* clean up previous SCAN result, add current BSS back to table if any */
BssTableInit(&pAd->ScanTab);
if (BssIdx != BSS_NOT_FOUND) {
- // DDK Note: If the NIC is associated with a particular BSSID and SSID
- // that are not contained in the list of BSSIDs generated by this scan, the
- // BSSID description of the currently associated BSSID and SSID should be
- // appended to the list of BSSIDs in the NIC's database.
- // To ensure this, we append this BSS as the first entry in SCAN result
+ /* DDK Note: If the NIC is associated with a particular BSSID and SSID */
+ /* that are not contained in the list of BSSIDs generated by this scan, the */
+ /* BSSID description of the currently associated BSSID and SSID should be */
+ /* appended to the list of BSSIDs in the NIC's database. */
+ /* To ensure this, we append this BSS as the first entry in SCAN result */
NdisMoveMemory(&pAd->ScanTab.BssEntry[0], &CurrBss,
sizeof(BSS_ENTRY));
pAd->ScanTab.BssNr = 1;
MLME_DISASSOC_REQ_STRUCT DisassocReq;
ULONG Now;
- // Step 1. record the desired user settings to MlmeAux
+ /* Step 1. record the desired user settings to MlmeAux */
NdisZeroMemory(pAd->MlmeAux.Ssid, MAX_LEN_OF_SSID);
NdisMoveMemory(pAd->MlmeAux.Ssid, pOidSsid->Ssid, pOidSsid->SsidLength);
pAd->MlmeAux.SsidLen = (UCHAR) pOidSsid->SsidLength;
pAd->StaCfg.bAutoConnectByBssid = FALSE;
- //
- // Update Reconnect Ssid, that user desired to connect.
- //
+ /* */
+ /* Update Reconnect Ssid, that user desired to connect. */
+ /* */
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, MAX_LEN_OF_SSID);
NdisMoveMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.Ssid,
pAd->MlmeAux.SsidLen);
pAd->MlmeAux.AutoReconnectSsidLen = pAd->MlmeAux.SsidLen;
- // step 2. find all matching BSS in the lastest SCAN result (inBssTab)
- // & log them into MlmeAux.SsidBssTab for later-on iteration. Sort by RSSI order
+ /* step 2. find all matching BSS in the lastest SCAN result (inBssTab) */
+ /* & log them into MlmeAux.SsidBssTab for later-on iteration. Sort by RSSI order */
BssTableSsidSort(pAd, &pAd->MlmeAux.SsidBssTab,
(PCHAR) pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen);
pAd->CommonCfg.SsidLen)
&& MAC_ADDR_EQUAL(pAd->CommonCfg.Bssid,
pAd->MlmeAux.SsidBssTab.BssEntry[0].Bssid)) {
- // Case 1. already connected with an AP who has the desired SSID
- // with highest RSSI
+ /* Case 1. already connected with an AP who has the desired SSID */
+ /* with highest RSSI */
- // Add checking Mode "LEAP" for CCX 1.0
+ /* Add checking Mode "LEAP" for CCX 1.0 */
if (((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
(pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
(pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
(pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
) &&
(pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED)) {
- // case 1.1 For WPA, WPA-PSK, if the 1x port is not secured, we have to redo
- // connection process
+ /* case 1.1 For WPA, WPA-PSK, if the 1x port is not secured, we have to redo */
+ /* connection process */
DBGPRINT(RT_DEBUG_TRACE,
("CntlOidSsidProc():CNTL - disassociate with current AP...\n"));
DisassocParmFill(pAd, &DisassocReq,
&DisassocReq);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC;
} else if (pAd->bConfigChanged == TRUE) {
- // case 1.2 Important Config has changed, we have to reconnect to the same AP
+ /* case 1.2 Important Config has changed, we have to reconnect to the same AP */
DBGPRINT(RT_DEBUG_TRACE,
("CntlOidSsidProc():CNTL - disassociate with current AP Because config changed...\n"));
DisassocParmFill(pAd, &DisassocReq,
&DisassocReq);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC;
} else {
- // case 1.3. already connected to the SSID with highest RSSI.
+ /* case 1.3. already connected to the SSID with highest RSSI. */
DBGPRINT(RT_DEBUG_TRACE,
("CntlOidSsidProc():CNTL - already with this BSSID. ignore this SET_SSID request\n"));
- //
- // (HCT 12.1) 1c_wlan_mediaevents required
- // media connect events are indicated when associating with the same AP
- //
+ /* */
+ /* (HCT 12.1) 1c_wlan_mediaevents required */
+ /* media connect events are indicated when associating with the same AP */
+ /* */
if (INFRA_ON(pAd)) {
- //
- // Since MediaState already is NdisMediaStateConnected
- // We just indicate the connect event again to meet the WHQL required.
- //
+ /* */
+ /* Since MediaState already is NdisMediaStateConnected */
+ /* We just indicate the connect event again to meet the WHQL required. */
+ /* */
pAd->IndicateMediaState =
NdisMediaStateConnected;
RTMP_IndicateMediaState(pAd);
- pAd->ExtraInfo = GENERAL_LINK_UP; // Update extra information to link is up
+ pAd->ExtraInfo = GENERAL_LINK_UP; /* Update extra information to link is up */
}
pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
0);
}
} else if (INFRA_ON(pAd)) {
- //
- // For RT61
- // [88888] OID_802_11_SSID should have returned NDTEST_WEP_AP2(Returned: )
- // RT61 may lost SSID, and not connect to NDTEST_WEP_AP2 and will connect to NDTEST_WEP_AP2 by Autoreconnect
- // But media status is connected, so the SSID not report correctly.
- //
+ /* */
+ /* For RT61 */
+ /* [88888] OID_802_11_SSID should have returned NDTEST_WEP_AP2(Returned: ) */
+ /* RT61 may lost SSID, and not connect to NDTEST_WEP_AP2 and will connect to NDTEST_WEP_AP2 by Autoreconnect */
+ /* But media status is connected, so the SSID not report correctly. */
+ /* */
if (!SSID_EQUAL
(pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen,
pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen)) {
- //
- // Different SSID means not Roaming case, so we let LinkDown() to Indicate a disconnect event.
- //
+ /* */
+ /* Different SSID means not Roaming case, so we let LinkDown() to Indicate a disconnect event. */
+ /* */
pAd->MlmeAux.CurrReqIsFromNdis = TRUE;
}
- // case 2. active INFRA association existent
- // roaming is done within miniport driver, nothing to do with configuration
- // utility. so upon a new SET(OID_802_11_SSID) is received, we just
- // disassociate with the current associated AP,
- // then perform a new association with this new SSID, no matter the
- // new/old SSID are the same or not.
+ /* case 2. active INFRA association existent */
+ /* roaming is done within miniport driver, nothing to do with configuration */
+ /* utility. so upon a new SET(OID_802_11_SSID) is received, we just */
+ /* disassociate with the current associated AP, */
+ /* then perform a new association with this new SSID, no matter the */
+ /* new/old SSID are the same or not. */
DBGPRINT(RT_DEBUG_TRACE,
("CntlOidSsidProc():CNTL - disassociate with current AP...\n"));
DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid,
sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
pAd->Mlme.CntlMachine.CurrState =
CNTL_WAIT_OID_LIST_SCAN;
- // Reset Missed scan number
+ /* Reset Missed scan number */
pAd->StaCfg.LastScanTime = Now;
} else {
pAd->MlmeAux.BssIdx = 0;
MLME_DISASSOC_REQ_STRUCT DisassocReq;
MLME_JOIN_REQ_STRUCT JoinReq;
- // record user desired settings
+ /* record user desired settings */
COPY_MAC_ADDR(pAd->MlmeAux.Bssid, pOidBssid);
pAd->MlmeAux.BssType = pAd->StaCfg.BssType;
- // find the desired BSS in the latest SCAN result table
+ /* find the desired BSS in the latest SCAN result table */
BssIdx = BssTableSearch(&pAd->ScanTab, pOidBssid, pAd->MlmeAux.Channel);
if (BssIdx == BSS_NOT_FOUND) {
MLME_SCAN_REQ_STRUCT ScanReq;
DBGPRINT(RT_DEBUG_TRACE,
("CNTL - BSSID not found. reply NDIS_STATUS_NOT_ACCEPTED\n"));
- //pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
+ /*pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; */
DBGPRINT(RT_DEBUG_TRACE,
("CNTL - BSSID not found. start a new scan\n"));
MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ,
sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;
- // Reset Missed scan number
+ /* Reset Missed scan number */
NdisGetSystemUpTime(&pAd->StaCfg.LastScanTime);
return;
}
- //
- // Update Reconnect Ssid, that user desired to connect.
- //
+ /* */
+ /* Update Reconnect Ssid, that user desired to connect. */
+ /* */
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, MAX_LEN_OF_SSID);
pAd->MlmeAux.AutoReconnectSsidLen =
pAd->ScanTab.BssEntry[BssIdx].SsidLen;
pAd->ScanTab.BssEntry[BssIdx].Ssid,
pAd->ScanTab.BssEntry[BssIdx].SsidLen);
- // copy the matched BSS entry from ScanTab to MlmeAux.SsidBssTab. Why?
- // Because we need this entry to become the JOIN target in later on SYNC state machine
+ /* copy the matched BSS entry from ScanTab to MlmeAux.SsidBssTab. Why? */
+ /* Because we need this entry to become the JOIN target in later on SYNC state machine */
pAd->MlmeAux.BssIdx = 0;
pAd->MlmeAux.SsidBssTab.BssNr = 1;
NdisMoveMemory(&pAd->MlmeAux.SsidBssTab.BssEntry[0],
&pAd->ScanTab.BssEntry[BssIdx], sizeof(BSS_ENTRY));
- // Add SSID into MlmeAux for site surey joining hidden SSID
+ /* Add SSID into MlmeAux for site surey joining hidden SSID */
pAd->MlmeAux.SsidLen = pAd->ScanTab.BssEntry[BssIdx].SsidLen;
NdisMoveMemory(pAd->MlmeAux.Ssid, pAd->ScanTab.BssEntry[BssIdx].Ssid,
pAd->MlmeAux.SsidLen);
{
if (INFRA_ON(pAd)) {
- // disassoc from current AP first
+ /* disassoc from current AP first */
DBGPRINT(RT_DEBUG_TRACE,
("CNTL - disassociate with current AP ...\n"));
DisassocParmFill(pAd, &DisassocReq,
DBGPRINT(RT_DEBUG_TRACE,
("NDIS_STATUS_MEDIA_DISCONNECT Event C!\n"));
}
- // Change the wepstatus to original wepstatus
+ /* Change the wepstatus to original wepstatus */
pAd->StaCfg.WepStatus = pAd->StaCfg.OrigWepStatus;
pAd->StaCfg.PairCipher = pAd->StaCfg.OrigWepStatus;
pAd->StaCfg.GroupCipher = pAd->StaCfg.OrigWepStatus;
- // Check cipher suite, AP must have more secured cipher than station setting
- // Set the Pairwise and Group cipher to match the intended AP setting
- // We can only connect to AP with less secured cipher setting
+ /* Check cipher suite, AP must have more secured cipher than station setting */
+ /* Set the Pairwise and Group cipher to match the intended AP setting */
+ /* We can only connect to AP with less secured cipher setting */
if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA)
|| (pAd->StaCfg.AuthMode ==
Ndis802_11AuthModeWPAPSK)) {
pAd->StaCfg.PairCipher =
pAd->ScanTab.BssEntry[BssIdx].WPA.
PairCipherAux;
- else // There is no PairCipher Aux, downgrade our capability to TKIP
+ else /* There is no PairCipher Aux, downgrade our capability to TKIP */
pAd->StaCfg.PairCipher =
Ndis802_11Encryption2Enabled;
} else
pAd->StaCfg.PairCipher =
pAd->ScanTab.BssEntry[BssIdx].WPA2.
PairCipherAux;
- else // There is no PairCipher Aux, downgrade our capability to TKIP
+ else /* There is no PairCipher Aux, downgrade our capability to TKIP */
pAd->StaCfg.PairCipher =
Ndis802_11Encryption2Enabled;
- // RSN capability
+ /* RSN capability */
pAd->StaCfg.RsnCapability =
pAd->ScanTab.BssEntry[BssIdx].WPA2.
RsnCapability;
}
- // Set Mix cipher flag
+ /* Set Mix cipher flag */
pAd->StaCfg.bMixCipher =
(pAd->StaCfg.PairCipher ==
pAd->StaCfg.GroupCipher) ? FALSE : TRUE;
// If mix cipher, re-build RSNIE
RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, 0);
} */
- // No active association, join the BSS immediately
+ /* No active association, join the BSS immediately */
DBGPRINT(RT_DEBUG_TRACE,
("CNTL - joining %02x:%02x:%02x:%02x:%02x:%02x ...\n",
pOidBssid[0], pOidBssid[1], pOidBssid[2],
}
}
-// Roaming is the only external request triggering CNTL state machine
-// despite of other "SET OID" operation. All "SET OID" related oerations
-// happen in sequence, because no other SET OID will be sent to this device
-// until the the previous SET operation is complete (successful o failed).
-// So, how do we quarantee this ROAMING request won't corrupt other "SET OID"?
-// or been corrupted by other "SET OID"?
-//
-// IRQL = DISPATCH_LEVEL
+/* Roaming is the only external request triggering CNTL state machine */
+/* despite of other "SET OID" operation. All "SET OID" related oerations */
+/* happen in sequence, because no other SET OID will be sent to this device */
+/* until the the previous SET operation is complete (successful o failed). */
+/* So, how do we quarantee this ROAMING request won't corrupt other "SET OID"? */
+/* or been corrupted by other "SET OID"? */
+/* */
+/* IRQL = DISPATCH_LEVEL */
VOID CntlMlmeRoamingProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
{
UCHAR BBPValue = 0;
DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Roaming in MlmeAux.RoamTab...\n"));
{
- //Let BBP register at 20MHz to do (fast) roaming.
+ /*Let BBP register at 20MHz to do (fast) roaming. */
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
BBPValue &= (~0x18);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
LinkDown(pAd, FALSE);
- // case 1. no matching BSS, and user wants ADHOC, so we just start a new one
+ /* case 1. no matching BSS, and user wants ADHOC, so we just start a new one */
if ((pAd->MlmeAux.SsidBssTab.BssNr == 0)
&& (pAd->StaCfg.BssType == BSS_ADHOC)) {
DBGPRINT(RT_DEBUG_TRACE,
sizeof(MLME_START_REQ_STRUCT), &StartReq);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_START;
}
- // case 2. try each matched BSS
+ /* case 2. try each matched BSS */
else {
pAd->MlmeAux.BssIdx = 0;
if (Elem->MsgType == MT2_JOIN_CONF) {
NdisMoveMemory(&Reason, Elem->Msg, sizeof(USHORT));
if (Reason == MLME_SUCCESS) {
- // 1. joined an IBSS, we are pretty much done here
+ /* 1. joined an IBSS, we are pretty much done here */
if (pAd->MlmeAux.BssType == BSS_ADHOC) {
- //
- // 5G bands rules of Japan:
- // Ad hoc must be disabled in W53(ch52,56,60,64) channels.
- //
+ /* */
+ /* 5G bands rules of Japan: */
+ /* Ad hoc must be disabled in W53(ch52,56,60,64) channels. */
+ /* */
if ((pAd->CommonCfg.bIEEE80211H == 1) &&
RadarChannelCheck(pAd,
pAd->CommonCfg.Channel)
NdisMediaStateConnected;
pAd->ExtraInfo = GENERAL_LINK_UP;
}
- // 2. joined a new INFRA network, start from authentication
+ /* 2. joined a new INFRA network, start from authentication */
else {
{
- // either Ndis802_11AuthModeShared or Ndis802_11AuthModeAutoSwitch, try shared key first
+ /* either Ndis802_11AuthModeShared or Ndis802_11AuthModeAutoSwitch, try shared key first */
if ((pAd->StaCfg.AuthMode ==
Ndis802_11AuthModeShared)
|| (pAd->StaCfg.AuthMode ==
CNTL_WAIT_AUTH;
}
} else {
- // 3. failed, try next BSS
+ /* 3. failed, try next BSS */
pAd->MlmeAux.BssIdx++;
IterateOnBssTab(pAd);
}
if (Elem->MsgType == MT2_START_CONF) {
NdisMoveMemory(&Result, Elem->Msg, sizeof(USHORT));
if (Result == MLME_SUCCESS) {
- //
- // 5G bands rules of Japan:
- // Ad hoc must be disabled in W53(ch52,56,60,64) channels.
- //
+ /* */
+ /* 5G bands rules of Japan: */
+ /* Ad hoc must be disabled in W53(ch52,56,60,64) channels. */
+ /* */
if ((pAd->CommonCfg.bIEEE80211H == 1) &&
RadarChannelCheck(pAd, pAd->CommonCfg.Channel)
) {
}
LinkUp(pAd, BSS_ADHOC);
pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
- // Before send beacon, driver need do radar detection
+ /* Before send beacon, driver need do radar detection */
if ((pAd->CommonCfg.Channel > 14)
&& (pAd->CommonCfg.bIEEE80211H == 1)
&& RadarChannelCheck(pAd, pAd->CommonCfg.Channel)) {
CNTL_WAIT_ASSOC;
}
} else {
- // This fail may because of the AP already keep us in its MAC table without
- // ageing-out. The previous authentication attempt must have let it remove us.
- // so try Authentication again may help. For D-Link DWL-900AP+ compatibility.
+ /* This fail may because of the AP already keep us in its MAC table without */
+ /* ageing-out. The previous authentication attempt must have let it remove us. */
+ /* so try Authentication again may help. For D-Link DWL-900AP+ compatibility. */
DBGPRINT(RT_DEBUG_TRACE,
("CNTL - AUTH FAIL, try again...\n"));
Ndis802_11AuthModeShared)
|| (pAd->StaCfg.AuthMode ==
Ndis802_11AuthModeAutoSwitch)) {
- // either Ndis802_11AuthModeShared or Ndis802_11AuthModeAutoSwitch, try shared key first
+ /* either Ndis802_11AuthModeShared or Ndis802_11AuthModeAutoSwitch, try shared key first */
AuthParmFill(pAd, &AuthReq,
pAd->MlmeAux.Bssid,
AUTH_MODE_KEY);
pAd->Mlme.CntlMachine.CurrState =
CNTL_WAIT_AUTH2;
} else {
- // not success, try next BSS
+ /* not success, try next BSS */
DBGPRINT(RT_DEBUG_TRACE,
("CNTL - AUTH FAIL, give up; try next BSS\n"));
- pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; //???????
+ pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; /*??????? */
pAd->MlmeAux.BssIdx++;
IterateOnBssTab(pAd);
}
("CNTL - Association successful on BSS #%ld\n",
pAd->MlmeAux.BssIdx));
} else {
- // not success, try next BSS
+ /* not success, try next BSS */
DBGPRINT(RT_DEBUG_TRACE,
("CNTL - Association fails on BSS #%ld\n",
pAd->MlmeAux.BssIdx));
if (Elem->MsgType == MT2_REASSOC_CONF) {
NdisMoveMemory(&Result, Elem->Msg, sizeof(USHORT));
if (Result == MLME_SUCCESS) {
- // send wireless event - for association
+ /* send wireless event - for association */
if (pAd->CommonCfg.bWirelessEvent)
RTMPSendWirelessEvent(pAd, IW_ASSOC_EVENT_FLAG,
pAd->MacTab.
Content[BSSID_WCID].Addr,
BSS0, 0);
- //
- // NDIS requires a new Link UP indication but no Link Down for RE-ASSOC
- //
+ /* */
+ /* NDIS requires a new Link UP indication but no Link Down for RE-ASSOC */
+ /* */
LinkUp(pAd, BSS_INFRA);
pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
("CNTL - Re-assocition successful on BSS #%ld\n",
pAd->MlmeAux.RoamIdx));
} else {
- // reassoc failed, try to pick next BSS in the BSS Table
+ /* reassoc failed, try to pick next BSS in the BSS Table */
DBGPRINT(RT_DEBUG_TRACE,
("CNTL - Re-assocition fails on BSS #%ld\n",
pAd->MlmeAux.RoamIdx));
#define AC2_DEF_TXOP 94
#define AC3_DEF_TXOP 47
- // Turn on QOs if use HT rate.
+ /* Turn on QOs if use HT rate. */
if (pAd->CommonCfg.APEdcaParm.bValid == FALSE) {
pAd->CommonCfg.APEdcaParm.bValid = TRUE;
pAd->CommonCfg.APEdcaParm.Aifsn[0] = 3;
UCHAR Value = 0, idx = 0, HashIdx = 0;
MAC_TABLE_ENTRY *pEntry = NULL, *pCurrEntry = NULL;
- // Init ChannelQuality to prevent DEAD_CQI at initial LinkUp
+ /* Init ChannelQuality to prevent DEAD_CQI at initial LinkUp */
pAd->Mlme.ChannelQuality = 50;
pEntry = MacTableLookup(pAd, pAd->CommonCfg.Bssid);
pEntry = &pAd->MacTab.Content[BSSID_WCID];
- //
- // ASSOC - DisassocTimeoutAction
- // CNTL - Dis-associate successful
- // !!! LINK DOWN !!!
- // [88888] OID_802_11_SSID should have returned NDTEST_WEP_AP2(Returned: )
- //
- // To prevent DisassocTimeoutAction to call Link down after we link up,
- // cancel the DisassocTimer no matter what it start or not.
- //
+ /* */
+ /* ASSOC - DisassocTimeoutAction */
+ /* CNTL - Dis-associate successful */
+ /* !!! LINK DOWN !!! */
+ /* [88888] OID_802_11_SSID should have returned NDTEST_WEP_AP2(Returned: ) */
+ /* */
+ /* To prevent DisassocTimeoutAction to call Link down after we link up, */
+ /* cancel the DisassocTimer no matter what it start or not. */
+ /* */
RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer, &Cancelled);
COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(pAd);
COPY_HTSETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(pAd);
#ifdef RTMP_MAC_PCI
- // Before power save before link up function, We will force use 1R.
- // So after link up, check Rx antenna # again.
+ /* Before power save before link up function, We will force use 1R. */
+ /* So after link up, check Rx antenna # again. */
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
if (pAd->Antenna.field.RxPath == 3) {
Value |= (0x10);
}
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
pAd->StaCfg.BBPR3 = Value;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
if (BssType == BSS_ADHOC) {
OPSTATUS_SET_FLAG(pAd, fOP_STATUS_ADHOC_ON);
DBGPRINT(RT_DEBUG_TRACE, ("!!!Infra LINK UP !!! \n"));
}
- // 3*3
- // reset Tx beamforming bit
+ /* 3*3 */
+ /* reset Tx beamforming bit */
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value);
Value &= (~0x01);
Value |= pAd->CommonCfg.RegTransmitSetting.field.TxBF;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value);
- // Change to AP channel
+ /* Change to AP channel */
if ((pAd->CommonCfg.CentralChannel > pAd->CommonCfg.Channel)
&& (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40)) {
- // Must using 40MHz.
+ /* Must using 40MHz. */
pAd->CommonCfg.BBPCurrentBW = BW_40;
AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
Value |= 0x10;
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value);
- // RX : control channel at lower
+ /* RX : control channel at lower */
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
Value &= (~0x20);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
#ifdef RTMP_MAC_PCI
pAd->StaCfg.BBPR3 = Value;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data);
Data &= 0xfffffffe;
} else if ((pAd->CommonCfg.CentralChannel < pAd->CommonCfg.Channel)
&& (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth ==
BW_40)) {
- // Must using 40MHz.
+ /* Must using 40MHz. */
pAd->CommonCfg.BBPCurrentBW = BW_40;
AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
#ifdef RTMP_MAC_PCI
pAd->StaCfg.BBPR3 = Value;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
if (pAd->MACVersion == 0x28600100) {
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x1A);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
#ifdef RTMP_MAC_PCI
pAd->StaCfg.BBPR3 = Value;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
if (pAd->MACVersion == 0x28600100) {
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16);
RTMPSetAGCInitValue(pAd, pAd->CommonCfg.BBPCurrentBW);
- //
- // Save BBP_R66 value, it will be used in RTUSBResumeMsduTransmission
- //
+ /* */
+ /* Save BBP_R66 value, it will be used in RTUSBResumeMsduTransmission */
+ /* */
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66,
&pAd->BbpTuning.R66CurrentValue);
AsicSetSlotTime(pAd, TRUE);
AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
- // Call this for RTS protectionfor legacy rate, we will always enable RTS threshold, but normally it will not hit
+ /* Call this for RTS protectionfor legacy rate, we will always enable RTS threshold, but normally it will not hit */
AsicUpdateProtect(pAd, 0, (OFDMSETPROTECT | CCKSETPROTECT), TRUE,
FALSE);
if ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE)) {
- // Update HT protectionfor based on AP's operating mode.
+ /* Update HT protectionfor based on AP's operating mode. */
if (pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent == 1) {
AsicUpdateProtect(pAd,
pAd->MlmeAux.AddHtInfo.AddHtInfo2.
NdisZeroMemory(&pAd->DrsCounters, sizeof(COUNTER_DRS));
NdisGetSystemUpTime(&Now);
- pAd->StaCfg.LastBeaconRxTime = Now; // last RX timestamp
+ pAd->StaCfg.LastBeaconRxTime = Now; /* last RX timestamp */
if ((pAd->CommonCfg.TxPreamble != Rt802_11PreambleLong) &&
CAP_IS_SHORT_PREAMBLE_ON(pAd->StaActive.CapabilityInfo)) {
if ((pAd->CommonCfg.Channel > 14)
&& (pAd->CommonCfg.bIEEE80211H == 1)
&& RadarChannelCheck(pAd, pAd->CommonCfg.Channel)) {
- ; //Do nothing
+ ; /*Do nothing */
} else {
AsicEnableIbssSync(pAd);
}
- // In ad hoc mode, use MAC table from index 1.
- // p.s ASIC use all 0xff as termination of WCID table search.To prevent it's 0xff-ff-ff-ff-ff-ff, Write 0 here.
+ /* In ad hoc mode, use MAC table from index 1. */
+ /* p.s ASIC use all 0xff as termination of WCID table search.To prevent it's 0xff-ff-ff-ff-ff-ff, Write 0 here. */
RTMP_IO_WRITE32(pAd, MAC_WCID_BASE, 0x00);
RTMP_IO_WRITE32(pAd, 0x1808, 0x00);
- // If WEP is enabled, add key material and cipherAlg into Asic
- // Fill in Shared Key Table(offset: 0x6c00) and Shared Key Mode(offset: 0x7000)
+ /* If WEP is enabled, add key material and cipherAlg into Asic */
+ /* Fill in Shared Key Table(offset: 0x6c00) and Shared Key Mode(offset: 0x7000) */
if (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled) {
PUCHAR Key;
Key = pAd->SharedKey[BSS0][idx].Key;
if (pAd->SharedKey[BSS0][idx].KeyLen > 0) {
- // Set key material and cipherAlg to Asic
+ /* Set key material and cipherAlg to Asic */
AsicAddSharedKeyEntry(pAd, BSS0, idx,
CipherAlg, Key,
NULL, NULL);
if (idx == pAd->StaCfg.DefaultKeyId) {
- // Update WCID attribute table and IVEIV table for this group key table
+ /* Update WCID attribute table and IVEIV table for this group key table */
RTMPAddWcidAttributeEntry(pAd,
BSS0,
idx,
}
}
- // If WPANone is enabled, add key material and cipherAlg into Asic
- // Fill in Shared Key Table(offset: 0x6c00) and Shared Key Mode(offset: 0x7000)
+ /* If WPANone is enabled, add key material and cipherAlg into Asic */
+ /* Fill in Shared Key Table(offset: 0x6c00) and Shared Key Mode(offset: 0x7000) */
else if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone) {
- pAd->StaCfg.DefaultKeyId = 0; // always be zero
+ pAd->StaCfg.DefaultKeyId = 0; /* always be zero */
NdisZeroMemory(&pAd->SharedKey[BSS0][0],
sizeof(CIPHER_KEY));
&pAd->StaCfg.PMK[16],
LEN_TKIP_TXMICK);
}
- // Decide its ChiperAlg
+ /* Decide its ChiperAlg */
if (pAd->StaCfg.PairCipher ==
Ndis802_11Encryption2Enabled)
pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_TKIP;
pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_AES;
}
- // Set key material and cipherAlg to Asic
+ /* Set key material and cipherAlg to Asic */
AsicAddSharedKeyEntry(pAd,
BSS0,
0,
pAd->SharedKey[BSS0][0].TxMic,
pAd->SharedKey[BSS0][0].RxMic);
- // Update WCID attribute table and IVEIV table for this group key table
+ /* Update WCID attribute table and IVEIV table for this group key table */
RTMPAddWcidAttributeEntry(pAd, BSS0, 0,
pAd->SharedKey[BSS0][0].
CipherAlg, NULL);
}
- } else // BSS_INFRA
+ } else /* BSS_INFRA */
{
- // Check the new SSID with last SSID
+ /* Check the new SSID with last SSID */
while (Cancelled == TRUE) {
if (pAd->CommonCfg.LastSsidLen ==
pAd->CommonCfg.SsidLen) {
(pAd->CommonCfg.LastSsid,
pAd->CommonCfg.Ssid,
pAd->CommonCfg.LastSsidLen) == 0) {
- // Link to the old one no linkdown is required.
+ /* Link to the old one no linkdown is required. */
break;
}
}
- // Send link down event before set to link up
+ /* Send link down event before set to link up */
pAd->IndicateMediaState = NdisMediaStateDisconnected;
RTMP_IndicateMediaState(pAd);
pAd->ExtraInfo = GENERAL_LINK_DOWN;
break;
}
- //
- // On WPA mode, Remove All Keys if not connect to the last BSSID
- // Key will be set after 4-way handshake.
- //
+ /* */
+ /* On WPA mode, Remove All Keys if not connect to the last BSSID */
+ /* Key will be set after 4-way handshake. */
+ /* */
if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) {
ULONG IV;
- // Remove all WPA keys
+ /* Remove all WPA keys */
RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
RTMPWPARemoveAllKeys(pAd);
pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
pAd->StaCfg.PrivacyFilter =
Ndis802_11PrivFilter8021xWEP;
- // Fixed connection failed with Range Maximizer - 515 AP (Marvell Chip) when security is WPAPSK/TKIP
- // If IV related values are too large in GroupMsg2, AP would ignore this message.
+ /* Fixed connection failed with Range Maximizer - 515 AP (Marvell Chip) when security is WPAPSK/TKIP */
+ /* If IV related values are too large in GroupMsg2, AP would ignore this message. */
IV = 1;
IV |= (pAd->StaCfg.DefaultKeyId << 30);
AsicUpdateWCIDIVEIV(pAd, BSSID_WCID, IV, 0);
}
- // NOTE:
- // the decision of using "short slot time" or not may change dynamically due to
- // new STA association to the AP. so we have to decide that upon parsing BEACON, not here
+ /* NOTE: */
+ /* the decision of using "short slot time" or not may change dynamically due to */
+ /* new STA association to the AP. so we have to decide that upon parsing BEACON, not here */
- // NOTE:
- // the decision to use "RTC/CTS" or "CTS-to-self" protection or not may change dynamically
- // due to new STA association to the AP. so we have to decide that upon parsing BEACON, not here
+ /* NOTE: */
+ /* the decision to use "RTC/CTS" or "CTS-to-self" protection or not may change dynamically */
+ /* due to new STA association to the AP. so we have to decide that upon parsing BEACON, not here */
ComposePsPoll(pAd);
ComposeNullFrame(pAd);
AsicEnableBssSync(pAd);
- // Add BSSID to WCID search table
+ /* Add BSSID to WCID search table */
AsicUpdateRxWCIDTable(pAd, BSSID_WCID, pAd->CommonCfg.Bssid);
- // If WEP is enabled, add paiewise and shared key
+ /* If WEP is enabled, add paiewise and shared key */
if (((pAd->StaCfg.WpaSupplicantUP) &&
(pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled) &&
(pAd->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)) ||
Key = pAd->SharedKey[BSS0][idx].Key;
if (pAd->SharedKey[BSS0][idx].KeyLen > 0) {
- // Set key material and cipherAlg to Asic
+ /* Set key material and cipherAlg to Asic */
AsicAddSharedKeyEntry(pAd, BSS0, idx,
CipherAlg, Key,
NULL, NULL);
if (idx == pAd->StaCfg.DefaultKeyId) {
- // Assign group key info
+ /* Assign group key info */
RTMPAddWcidAttributeEntry(pAd,
BSS0,
idx,
NULL);
pEntry->Aid = BSSID_WCID;
- // Assign pairwise key info
+ /* Assign pairwise key info */
RTMPAddWcidAttributeEntry(pAd,
BSS0,
idx,
}
}
}
- // only INFRASTRUCTURE mode need to indicate connectivity immediately; ADHOC mode
- // should wait until at least 2 active nodes in this BSSID.
+ /* only INFRASTRUCTURE mode need to indicate connectivity immediately; ADHOC mode */
+ /* should wait until at least 2 active nodes in this BSSID. */
OPSTATUS_SET_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
- // For GUI ++
+ /* For GUI ++ */
if (pAd->StaCfg.AuthMode < Ndis802_11AuthModeWPA) {
pAd->IndicateMediaState = NdisMediaStateConnected;
pAd->ExtraInfo = GENERAL_LINK_UP;
RTMPSetTimer(&pAd->Mlme.LinkDownTimer,
LINK_DOWN_TIMEOUT);
}
- // --
+ /* -- */
- // Add BSSID in my MAC Table.
+ /* Add BSSID in my MAC Table. */
NdisAcquireSpinLock(&pAd->MacTabLock);
- // add this MAC entry into HASH table
+ /* add this MAC entry into HASH table */
if (pEntry) {
HashIdx = MAC_ADDR_HASH_INDEX(pAd->CommonCfg.Bssid);
if (pAd->MacTab.Hash[HashIdx] == NULL) {
MAC_ADDR_LEN);
pEntry->Aid = BSSID_WCID;
pEntry->pAd = pAd;
- pEntry->ValidAsCLI = TRUE; //Although this is bssid..still set ValidAsCl
- pAd->MacTab.Size = 1; // infra mode always set MACtab size =1.
+ pEntry->ValidAsCLI = TRUE; /*Although this is bssid..still set ValidAsCl */
+ pAd->MacTab.Size = 1; /* infra mode always set MACtab size =1. */
pEntry->Sst = SST_ASSOC;
pEntry->AuthState = SST_ASSOC;
pEntry->AuthMode = pAd->StaCfg.AuthMode;
pAd->CommonCfg.BACapability.word,
pAd->MacTab.Content[BSSID_WCID].ClientStatusFlags));
- // Set LED
+ /* Set LED */
RTMPSetLED(pAd, LED_LINK_UP);
pAd->Mlme.PeriodicRound = 0;
pAd->Mlme.OneSecPeriodicRound = 0;
- pAd->bConfigChanged = FALSE; // Reset config flag
- pAd->ExtraInfo = GENERAL_LINK_UP; // Update extra information to link is up
+ pAd->bConfigChanged = FALSE; /* Reset config flag */
+ pAd->ExtraInfo = GENERAL_LINK_UP; /* Update extra information to link is up */
- // Set asic auto fall back
+ /* Set asic auto fall back */
{
PUCHAR pTable;
UCHAR TableSize = 0;
|| (pEntry->HTPhyMode.field.MCS == 32))
pEntry->HTPhyMode.field.STBC = STBC_NONE;
- // If the legacy mode is set, overwrite the transmit setting of this entry.
+ /* If the legacy mode is set, overwrite the transmit setting of this entry. */
if (pEntry->HTPhyMode.field.MODE <= MODE_OFDM)
RTMPUpdateLegacyTxSetting((UCHAR) pAd->StaCfg.
DesiredTransmitSetting.field.
pEntry->bAutoTxRateSwitch = TRUE;
NdisReleaseSpinLock(&pAd->MacTabLock);
- // Let Link Status Page display first initial rate.
+ /* Let Link Status Page display first initial rate. */
pAd->LastTxRate = (USHORT) (pEntry->HTPhyMode.word);
- // Select DAC according to HT or Legacy
+ /* Select DAC according to HT or Legacy */
if (pAd->StaActive.SupportedPhyInfo.MCSSet[0] != 0x00) {
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &Value);
Value &= (~0x18);
if (pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) {
} else if (pEntry->MaxRAmpduFactor == 0) {
- // If HT AP doesn't support MaxRAmpduFactor = 1, we need to set max PSDU to 0.
- // Because our Init value is 1 at MACRegTable.
+ /* If HT AP doesn't support MaxRAmpduFactor = 1, we need to set max PSDU to 0. */
+ /* Because our Init value is 1 at MACRegTable. */
RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, 0x0fff);
}
- // Patch for Marvel AP to gain high throughput
- // Need to set as following,
- // 1. Set txop in register-EDCA_AC0_CFG as 0x60
- // 2. Set EnTXWriteBackDDONE in register-WPDMA_GLO_CFG as zero
- // 3. PBF_MAX_PCNT as 0x1F3FBF9F
- // 4. kick per two packets when dequeue
- //
- // Txop can only be modified when RDG is off, WMM is disable and TxBurst is enable
- //
- // if 1. Legacy AP WMM on, or 2. 11n AP, AMPDU disable. Force turn off burst no matter what bEnableTxBurst is.
+ /* Patch for Marvel AP to gain high throughput */
+ /* Need to set as following, */
+ /* 1. Set txop in register-EDCA_AC0_CFG as 0x60 */
+ /* 2. Set EnTXWriteBackDDONE in register-WPDMA_GLO_CFG as zero */
+ /* 3. PBF_MAX_PCNT as 0x1F3FBF9F */
+ /* 4. kick per two packets when dequeue */
+ /* */
+ /* Txop can only be modified when RDG is off, WMM is disable and TxBurst is enable */
+ /* */
+ /* if 1. Legacy AP WMM on, or 2. 11n AP, AMPDU disable. Force turn off burst no matter what bEnableTxBurst is. */
if (!((pAd->CommonCfg.RxStream == 1) && (pAd->CommonCfg.TxStream == 1))
&& (pAd->StaCfg.bForceTxBurst == FALSE)
&&
DBGPRINT(RT_DEBUG_TRACE, ("Txburst 3\n"));
}
- // Re-check to turn on TX burst or not.
+ /* Re-check to turn on TX burst or not. */
if ((pAd->CommonCfg.IOTestParm.bLastAtheros == TRUE)
&& ((STA_WEP_ON(pAd)) || (STA_TKIP_ON(pAd)))) {
pAd->CommonCfg.IOTestParm.bNextDisableRxBA = TRUE;
if (pAd->CommonCfg.bEnableTxBurst) {
UINT32 MACValue = 0;
- // Force disable TXOP value in this case. The same action in MLMEUpdateProtect too.
- // I didn't change PBF_MAX_PCNT setting.
+ /* Force disable TXOP value in this case. The same action in MLMEUpdateProtect too. */
+ /* I didn't change PBF_MAX_PCNT setting. */
RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &MACValue);
MACValue &= 0xFFFFFF00;
RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, MACValue);
DBGPRINT(RT_DEBUG_TRACE,
("!!!pAd->bNextDisableRxBA= %d \n",
pAd->CommonCfg.IOTestParm.bNextDisableRxBA));
- // BSSID add in one MAC entry too. Because in Tx, ASIC need to check Cipher and IV/EIV, BAbitmap
- // Pther information in MACTab.Content[BSSID_WCID] is not necessary for driver.
- // Note: As STA, The MACTab.Content[BSSID_WCID]. PairwiseKey and Shared Key for BSS0 are the same.
+ /* BSSID add in one MAC entry too. Because in Tx, ASIC need to check Cipher and IV/EIV, BAbitmap */
+ /* Pther information in MACTab.Content[BSSID_WCID] is not necessary for driver. */
+ /* Note: As STA, The MACTab.Content[BSSID_WCID]. PairwiseKey and Shared Key for BSS0 are the same. */
if (pAd->StaCfg.WepStatus <= Ndis802_11WEPDisabled) {
if (pAd->StaCfg.WpaSupplicantUP &&
pEntry->PortSecured = pAd->StaCfg.PortSecured;
NdisReleaseSpinLock(&pAd->MacTabLock);
- //
- // Patch Atheros AP TX will breakdown issue.
- // AP Model: DLink DWL-8200AP
- //
+ /* */
+ /* Patch Atheros AP TX will breakdown issue. */
+ /* AP Model: DLink DWL-8200AP */
+ /* */
if (INFRA_ON(pAd) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)
&& STA_TKIP_ON(pAd)) {
RTMP_IO_WRITE32(pAd, RX_PARSER_CFG, 0x01);
{
UCHAR i, ByteValue = 0;
- // Do nothing if monitor mode is on
+ /* Do nothing if monitor mode is on */
if (MONITOR_ON(pAd))
return;
RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW);
- //Comment the codes, beasue the line 2291 call the same function.
- //RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled);
- // Not allow go to sleep within linkdown function.
+ /*Comment the codes, beasue the line 2291 call the same function. */
+ /*RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled); */
+ /* Not allow go to sleep within linkdown function. */
RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
if (pAd->CommonCfg.bWirelessEvent) {
}
pAd->bPCIclkOff = FALSE;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)
|| RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND)
}
#ifdef RTMP_MAC_PCI
pAd->bPCIclkOff = FALSE;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
- if (ADHOC_ON(pAd)) // Adhoc mode link down
+ if (ADHOC_ON(pAd)) /* Adhoc mode link down */
{
DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN 1!!!\n"));
pAd->CommonCfg.Channel);
DBGPRINT(RT_DEBUG_TRACE,
("!!! MacTab.Size=%d !!!\n", pAd->MacTab.Size));
- } else // Infra structure mode
+ } else /* Infra structure mode */
{
DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN 2!!!\n"));
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_INFRA_ON);
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
- // Saved last SSID for linkup comparison
+ /* Saved last SSID for linkup comparison */
pAd->CommonCfg.LastSsidLen = pAd->CommonCfg.SsidLen;
NdisMoveMemory(pAd->CommonCfg.LastSsid, pAd->CommonCfg.Ssid,
pAd->CommonCfg.LastSsidLen);
("NDIS_STATUS_MEDIA_DISCONNECT Event A!\n"));
pAd->MlmeAux.CurrReqIsFromNdis = FALSE;
} else {
- //
- // If disassociation request is from NDIS, then we don't need to delete BSSID from entry.
- // Otherwise lost beacon or receive De-Authentication from AP,
- // then we should delete BSSID from BssTable.
- // If we don't delete from entry, roaming will fail.
- //
+ /* */
+ /* If disassociation request is from NDIS, then we don't need to delete BSSID from entry. */
+ /* Otherwise lost beacon or receive De-Authentication from AP, */
+ /* then we should delete BSSID from BssTable. */
+ /* If we don't delete from entry, roaming will fail. */
+ /* */
BssTableDeleteEntry(&pAd->ScanTab, pAd->CommonCfg.Bssid,
pAd->CommonCfg.Channel);
}
- // restore back to -
- // 1. long slot (20 us) or short slot (9 us) time
- // 2. turn on/off RTS/CTS and/or CTS-to-self protection
- // 3. short preamble
+ /* restore back to - */
+ /* 1. long slot (20 us) or short slot (9 us) time */
+ /* 2. turn on/off RTS/CTS and/or CTS-to-self protection */
+ /* 3. short preamble */
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_BG_PROTECTION_INUSED);
}
pAd->MacTab.Content[i].Addr);
}
- AsicSetSlotTime(pAd, TRUE); //FALSE);
+ AsicSetSlotTime(pAd, TRUE); /*FALSE); */
AsicSetEdcaParm(pAd, NULL);
- // Set LED
+ /* Set LED */
RTMPSetLED(pAd, LED_LINK_DOWN);
pAd->LedIndicatorStrength = 0xF0;
- RTMPSetSignalLED(pAd, -100); // Force signal strength Led to be turned off, firmware is not done it.
+ RTMPSetSignalLED(pAd, -100); /* Force signal strength Led to be turned off, firmware is not done it. */
AsicDisableSync(pAd);
pAd->Mlme.OneSecPeriodicRound = 0;
if (pAd->StaCfg.BssType == BSS_INFRA) {
- // Remove StaCfg Information after link down
+ /* Remove StaCfg Information after link down */
NdisZeroMemory(pAd->CommonCfg.Bssid, MAC_ADDR_LEN);
NdisZeroMemory(pAd->CommonCfg.Ssid, MAX_LEN_OF_SSID);
pAd->CommonCfg.SsidLen = 0;
pAd->MlmeAux.HtCapabilityLen = 0;
pAd->MlmeAux.NewExtChannelOffset = 0xff;
- // Reset WPA-PSK state. Only reset when supplicant enabled
+ /* Reset WPA-PSK state. Only reset when supplicant enabled */
if (pAd->StaCfg.WpaState != SS_NOTUSE) {
pAd->StaCfg.WpaState = SS_START;
- // Clear Replay counter
+ /* Clear Replay counter */
NdisZeroMemory(pAd->StaCfg.ReplayCounter, 8);
}
- //
- // if link down come from AP, we need to remove all WPA keys on WPA mode.
- // otherwise will cause 4-way handshaking failed, since the WPA key not empty.
- //
+ /* */
+ /* if link down come from AP, we need to remove all WPA keys on WPA mode. */
+ /* otherwise will cause 4-way handshaking failed, since the WPA key not empty. */
+ /* */
if ((IsReqFromAP) && (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)) {
- // Remove all WPA keys
+ /* Remove all WPA keys */
RTMPWPARemoveAllKeys(pAd);
}
- // 802.1x port control
+ /* 802.1x port control */
- // Prevent clear PortSecured here with static WEP
- // NetworkManger set security policy first then set SSID to connect AP.
+ /* Prevent clear PortSecured here with static WEP */
+ /* NetworkManger set security policy first then set SSID to connect AP. */
if (pAd->StaCfg.WpaSupplicantUP &&
(pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled) &&
(pAd->StaCfg.IEEE8021X == FALSE)) {
pAd->StaCfg.MicErrCnt = 0;
pAd->IndicateMediaState = NdisMediaStateDisconnected;
- // Update extra information to link is up
+ /* Update extra information to link is up */
pAd->ExtraInfo = GENERAL_LINK_DOWN;
pAd->StaActive.SupportedPhyInfo.bHtEnable = FALSE;
#ifdef RTMP_MAC_USB
pAd->bUsbTxBulkAggre = FALSE;
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
- // Clean association information
+ /* Clean association information */
NdisZeroMemory(&pAd->StaCfg.AssocInfo,
sizeof(NDIS_802_11_ASSOCIATION_INFORMATION));
pAd->StaCfg.AssocInfo.Length =
pAd->StaCfg.ReqVarIELen = 0;
pAd->StaCfg.ResVarIELen = 0;
- //
- // Reset RSSI value after link down
- //
+ /* */
+ /* Reset RSSI value after link down */
+ /* */
pAd->StaCfg.RssiSample.AvgRssi0 = 0;
pAd->StaCfg.RssiSample.AvgRssi0X8 = 0;
pAd->StaCfg.RssiSample.AvgRssi1 = 0;
pAd->StaCfg.RssiSample.AvgRssi2 = 0;
pAd->StaCfg.RssiSample.AvgRssi2X8 = 0;
- // Restore MlmeRate
+ /* Restore MlmeRate */
pAd->CommonCfg.MlmeRate = pAd->CommonCfg.BasicMlmeRate;
pAd->CommonCfg.RtsRate = pAd->CommonCfg.BasicMlmeRate;
- //
- // After Link down, reset piggy-back setting in ASIC. Disable RDG.
- //
+ /* */
+ /* After Link down, reset piggy-back setting in ASIC. Disable RDG. */
+ /* */
if (pAd->CommonCfg.BBPCurrentBW == BW_40) {
pAd->CommonCfg.BBPCurrentBW = BW_20;
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &ByteValue);
ByteValue &= (~0x18);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, ByteValue);
}
- // Reset DAC
+ /* Reset DAC */
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &ByteValue);
ByteValue &= (~0x18);
if (pAd->Antenna.field.TxPath == 2) {
pAd->CommonCfg.BACapability.word = pAd->CommonCfg.REGBACapability.word;
- // Restore all settings in the following.
+ /* Restore all settings in the following. */
AsicUpdateProtect(pAd, 0,
(ALLN_SETPROTECT | CCKSETPROTECT | OFDMSETPROTECT),
TRUE, FALSE);
RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, 0x1fff);
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
-// Allow go to sleep after linkdown steps.
+/* Allow go to sleep after linkdown steps. */
RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
RtmpOSWrielessEventSend(pAd, SIOCGIWAP, -1, NULL, NULL, 0);
&& (pAd->Antenna.field.RxPath > 1 || pAd->Antenna.field.TxPath > 1)) {
RTMP_ASIC_MMPS_DISABLE(pAd);
}
-#endif // RT30xx //
+#endif /* RT30xx // */
}
/*
MLME_JOIN_REQ_STRUCT JoinReq;
ULONG BssIdx;
- // Change the wepstatus to original wepstatus
+ /* Change the wepstatus to original wepstatus */
pAd->StaCfg.WepStatus = pAd->StaCfg.OrigWepStatus;
pAd->StaCfg.PairCipher = pAd->StaCfg.OrigWepStatus;
pAd->StaCfg.GroupCipher = pAd->StaCfg.OrigWepStatus;
BssIdx = pAd->MlmeAux.BssIdx;
if (BssIdx < pAd->MlmeAux.SsidBssTab.BssNr) {
- // Check cipher suite, AP must have more secured cipher than station setting
- // Set the Pairwise and Group cipher to match the intended AP setting
- // We can only connect to AP with less secured cipher setting
+ /* Check cipher suite, AP must have more secured cipher than station setting */
+ /* Set the Pairwise and Group cipher to match the intended AP setting */
+ /* We can only connect to AP with less secured cipher setting */
if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA)
|| (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK)) {
pAd->StaCfg.GroupCipher =
pAd->StaCfg.PairCipher =
pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].
WPA.PairCipherAux;
- else // There is no PairCipher Aux, downgrade our capability to TKIP
+ else /* There is no PairCipher Aux, downgrade our capability to TKIP */
pAd->StaCfg.PairCipher =
Ndis802_11Encryption2Enabled;
} else if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2)
pAd->StaCfg.PairCipher =
pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].
WPA2.PairCipherAux;
- else // There is no PairCipher Aux, downgrade our capability to TKIP
+ else /* There is no PairCipher Aux, downgrade our capability to TKIP */
pAd->StaCfg.PairCipher =
Ndis802_11Encryption2Enabled;
- // RSN capability
+ /* RSN capability */
pAd->StaCfg.RsnCapability =
pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA2.
RsnCapability;
}
- // Set Mix cipher flag
+ /* Set Mix cipher flag */
pAd->StaCfg.bMixCipher =
(pAd->StaCfg.PairCipher ==
pAd->StaCfg.GroupCipher) ? FALSE : TRUE;
MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_START_REQ,
sizeof(MLME_START_REQ_STRUCT), &StartReq);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_START;
- } else // no more BSS
+ } else /* no more BSS */
{
{
}
}
-// for re-association only
-// IRQL = DISPATCH_LEVEL
+/* for re-association only */
+/* IRQL = DISPATCH_LEVEL */
VOID IterateOnBssTab2(IN PRTMP_ADAPTER pAd)
{
MLME_REASSOC_REQ_STRUCT ReassocReq;
AsicSwitchChannel(pAd, pBss->Channel, FALSE);
AsicLockChannel(pAd, pBss->Channel);
- // reassociate message has the same structure as associate message
+ /* reassociate message has the same structure as associate message */
AssocParmFill(pAd, &ReassocReq, pBss->Bssid,
pBss->CapabilityInfo, ASSOC_TIMEOUT,
pAd->StaCfg.DefaultListenCount);
sizeof(MLME_REASSOC_REQ_STRUCT), &ReassocReq);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_REASSOC;
- } else // no more BSS
+ } else /* no more BSS */
{
{
COPY_MAC_ADDR(pAd->PsPollFrame.Ta, pAd->CurrentAddress);
}
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
VOID ComposeNullFrame(IN PRTMP_ADAPTER pAd)
{
NdisZeroMemory(&pAd->NullFrame, sizeof(HEADER_802_11));
COPY_MAC_ADDR(pAd->NullFrame.Addr2, pAd->CurrentAddress);
COPY_MAC_ADDR(pAd->NullFrame.Addr3, pAd->CommonCfg.Bssid);
}
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
#ifdef RTMP_MAC_USB
VOID MlmeCntlConfirm(IN PRTMP_ADAPTER pAd, IN ULONG MsgType, IN USHORT Msg)
{
RTMPMoveMemory(&pAd->PsPollContext.TransferBuffer->field.
WirelessPacket[TXWI_SIZE + TXINFO_SIZE],
&pAd->PsPollFrame, sizeof(PSPOLL_FRAME));
- // Append 4 extra zero bytes.
+ /* Append 4 extra zero bytes. */
pAd->PsPollContext.BulkOutSize =
TXINFO_SIZE + TXWI_SIZE + sizeof(PSPOLL_FRAME) + 4;
}
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
VOID ComposeNullFrame(IN PRTMP_ADAPTER pAd)
{
PTXINFO_STRUC pTxInfo;
pAd->NullContext.BulkOutSize =
TXINFO_SIZE + TXWI_SIZE + sizeof(pAd->NullFrame) + 4;
}
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
/*
==========================================================================
if ((pAd->CommonCfg.PhyMode == PHY_11B)
&& (pAd->CommonCfg.Channel <= 14)) {
- SupRate[0] = 0x82; // 1 mbps
- SupRate[1] = 0x84; // 2 mbps
- SupRate[2] = 0x8b; // 5.5 mbps
- SupRate[3] = 0x96; // 11 mbps
+ SupRate[0] = 0x82; /* 1 mbps */
+ SupRate[1] = 0x84; /* 2 mbps */
+ SupRate[2] = 0x8b; /* 5.5 mbps */
+ SupRate[3] = 0x96; /* 11 mbps */
SupRateLen = 4;
ExtRateLen = 0;
} else if (pAd->CommonCfg.Channel > 14) {
- SupRate[0] = 0x8C; // 6 mbps, in units of 0.5 Mbps, basic rate
- SupRate[1] = 0x12; // 9 mbps, in units of 0.5 Mbps
- SupRate[2] = 0x98; // 12 mbps, in units of 0.5 Mbps, basic rate
- SupRate[3] = 0x24; // 18 mbps, in units of 0.5 Mbps
- SupRate[4] = 0xb0; // 24 mbps, in units of 0.5 Mbps, basic rate
- SupRate[5] = 0x48; // 36 mbps, in units of 0.5 Mbps
- SupRate[6] = 0x60; // 48 mbps, in units of 0.5 Mbps
- SupRate[7] = 0x6c; // 54 mbps, in units of 0.5 Mbps
+ SupRate[0] = 0x8C; /* 6 mbps, in units of 0.5 Mbps, basic rate */
+ SupRate[1] = 0x12; /* 9 mbps, in units of 0.5 Mbps */
+ SupRate[2] = 0x98; /* 12 mbps, in units of 0.5 Mbps, basic rate */
+ SupRate[3] = 0x24; /* 18 mbps, in units of 0.5 Mbps */
+ SupRate[4] = 0xb0; /* 24 mbps, in units of 0.5 Mbps, basic rate */
+ SupRate[5] = 0x48; /* 36 mbps, in units of 0.5 Mbps */
+ SupRate[6] = 0x60; /* 48 mbps, in units of 0.5 Mbps */
+ SupRate[7] = 0x6c; /* 54 mbps, in units of 0.5 Mbps */
SupRateLen = 8;
ExtRateLen = 0;
- //
- // Also Update MlmeRate & RtsRate for G only & A only
- //
+ /* */
+ /* Also Update MlmeRate & RtsRate for G only & A only */
+ /* */
pAd->CommonCfg.MlmeRate = RATE_6;
pAd->CommonCfg.RtsRate = RATE_6;
pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MCS =
OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
} else {
- SupRate[0] = 0x82; // 1 mbps
- SupRate[1] = 0x84; // 2 mbps
- SupRate[2] = 0x8b; // 5.5 mbps
- SupRate[3] = 0x96; // 11 mbps
+ SupRate[0] = 0x82; /* 1 mbps */
+ SupRate[1] = 0x84; /* 2 mbps */
+ SupRate[2] = 0x8b; /* 5.5 mbps */
+ SupRate[3] = 0x96; /* 11 mbps */
SupRateLen = 4;
- ExtRate[0] = 0x0C; // 6 mbps, in units of 0.5 Mbps,
- ExtRate[1] = 0x12; // 9 mbps, in units of 0.5 Mbps
- ExtRate[2] = 0x18; // 12 mbps, in units of 0.5 Mbps,
- ExtRate[3] = 0x24; // 18 mbps, in units of 0.5 Mbps
- ExtRate[4] = 0x30; // 24 mbps, in units of 0.5 Mbps,
- ExtRate[5] = 0x48; // 36 mbps, in units of 0.5 Mbps
- ExtRate[6] = 0x60; // 48 mbps, in units of 0.5 Mbps
- ExtRate[7] = 0x6c; // 54 mbps, in units of 0.5 Mbps
+ ExtRate[0] = 0x0C; /* 6 mbps, in units of 0.5 Mbps, */
+ ExtRate[1] = 0x12; /* 9 mbps, in units of 0.5 Mbps */
+ ExtRate[2] = 0x18; /* 12 mbps, in units of 0.5 Mbps, */
+ ExtRate[3] = 0x24; /* 18 mbps, in units of 0.5 Mbps */
+ ExtRate[4] = 0x30; /* 24 mbps, in units of 0.5 Mbps, */
+ ExtRate[5] = 0x48; /* 36 mbps, in units of 0.5 Mbps */
+ ExtRate[6] = 0x60; /* 48 mbps, in units of 0.5 Mbps */
+ ExtRate[7] = 0x6c; /* 54 mbps, in units of 0.5 Mbps */
ExtRateLen = 8;
}
pAd->StaActive.ExtRateLen = ExtRateLen;
NdisMoveMemory(pAd->StaActive.ExtRate, ExtRate, ExtRateLen);
- // compose IBSS beacon frame
+ /* compose IBSS beacon frame */
MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR,
pAd->CommonCfg.Bssid);
Privacy = (pAd->StaCfg.WepStatus == Ndis802_11Encryption1Enabled)
1, &IbssIe,
1, &IbssLen, 2, &pAd->StaActive.AtimWin, END_OF_ARGS);
- // add ERP_IE and EXT_RAE IE of in 802.11g
+ /* add ERP_IE and EXT_RAE IE of in 802.11g */
if (ExtRateLen) {
ULONG tmp;
ExtRateLen, ExtRate, END_OF_ARGS);
FrameLen += tmp;
}
- // If adhoc secruity is set for WPA-None, append the cipher suite IE
+ /* If adhoc secruity is set for WPA-None, append the cipher suite IE */
if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone) {
ULONG tmp;
RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus,
ULONG TmpLen;
UCHAR HtLen, HtLen1;
- // add HT Capability IE
+ /* add HT Capability IE */
HtLen = sizeof(pAd->CommonCfg.HtCapability);
HtLen1 = sizeof(pAd->CommonCfg.AddHTInfo);
FrameLen += TmpLen;
}
- //beacon use reserved WCID 0xff
+ /*beacon use reserved WCID 0xff */
if (pAd->CommonCfg.Channel > 14) {
RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, TRUE, FALSE, FALSE,
TRUE, 0, 0xff, FrameLen, PID_MGMT, PID_BEACON,
RATE_1, IFS_HTTXOP, FALSE,
&pAd->CommonCfg.MlmeTransmit);
} else {
- // Set to use 1Mbps for Adhoc beacon.
+ /* Set to use 1Mbps for Adhoc beacon. */
HTTRANSMIT_SETTING Transmit;
Transmit.word = 0;
RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, TRUE, FALSE, FALSE,
git://bbs.cooldavid.org / net-next-2.6.git / blobdiff