#include <linux/if_arp.h>
#include <linux/ioport.h>
#include <linux/skbuff.h>
-#include <linux/ethtool.h>
#include <linux/ieee80211.h>
-#include <pcmcia/cs_types.h>
-#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
static struct net_device_stats *ray_get_stats(struct net_device *dev);
static int ray_dev_init(struct net_device *dev);
-static const struct ethtool_ops netdev_ethtool_ops;
-
static int ray_open(struct net_device *dev);
static netdev_tx_t ray_dev_start_xmit(struct sk_buff *skb,
struct net_device *dev);
*/
static char *phy_addr = NULL;
-
-/* A struct pcmcia_device structure has fields for most things that are needed
- to keep track of a socket, but there will usually be some device
- specific information that also needs to be kept track of. The
- 'priv' pointer in a struct pcmcia_device structure can be used to point to
- a device-specific private data structure, like this.
-*/
static unsigned int ray_mem_speed = 500;
/* WARNING: THIS DRIVER IS NOT CAPABLE OF HANDLING MULTIPLE DEVICES! */
.ndo_validate_addr = eth_validate_addr,
};
-/*=============================================================================
- ray_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-=============================================================================*/
static int ray_probe(struct pcmcia_device *p_dev)
{
ray_dev_t *local;
local->finder = p_dev;
/* The io structure describes IO port mapping. None used here */
- p_dev->io.NumPorts1 = 0;
- p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
- p_dev->io.IOAddrLines = 5;
+ p_dev->resource[0]->end = 0;
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
/* General socket configuration */
- p_dev->conf.Attributes = CONF_ENABLE_IRQ;
- p_dev->conf.IntType = INT_MEMORY_AND_IO;
- p_dev->conf.ConfigIndex = 1;
+ p_dev->config_flags |= CONF_ENABLE_IRQ;
+ p_dev->config_index = 1;
p_dev->priv = dev;
/* Raylink entries in the device structure */
dev->netdev_ops = &ray_netdev_ops;
- SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
dev->wireless_handlers = &ray_handler_def;
#ifdef WIRELESS_SPY
local->wireless_data.spy_data = &local->spy_data;
return -ENOMEM;
} /* ray_attach */
-/*=============================================================================
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-=============================================================================*/
static void ray_detach(struct pcmcia_device *link)
{
struct net_device *dev;
dev_dbg(&link->dev, "ray_cs ray_detach ending\n");
} /* ray_detach */
-/*=============================================================================
- ray_config() is run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-=============================================================================*/
#define MAX_TUPLE_SIZE 128
static int ray_config(struct pcmcia_device *link)
{
int ret = 0;
int i;
- win_req_t req;
- memreq_t mem;
struct net_device *dev = (struct net_device *)link->priv;
ray_dev_t *local = netdev_priv(dev);
goto failed;
dev->irq = link->irq;
- /* This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping.
- */
- ret = pcmcia_request_configuration(link, &link->conf);
+ ret = pcmcia_enable_device(link);
if (ret)
goto failed;
/*** Set up 32k window for shared memory (transmit and control) ************/
- req.Attributes =
- WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT;
- req.Base = 0;
- req.Size = 0x8000;
- req.AccessSpeed = ray_mem_speed;
- ret = pcmcia_request_window(link, &req, &link->win);
+ link->resource[2]->flags |= WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT;
+ link->resource[2]->start = 0;
+ link->resource[2]->end = 0x8000;
+ ret = pcmcia_request_window(link, link->resource[2], ray_mem_speed);
if (ret)
goto failed;
- mem.CardOffset = 0x0000;
- mem.Page = 0;
- ret = pcmcia_map_mem_page(link, link->win, &mem);
+ ret = pcmcia_map_mem_page(link, link->resource[2], 0);
if (ret)
goto failed;
- local->sram = ioremap(req.Base, req.Size);
+ local->sram = ioremap(link->resource[2]->start,
+ resource_size(link->resource[2]));
/*** Set up 16k window for shared memory (receive buffer) ***************/
- req.Attributes =
+ link->resource[3]->flags |=
WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT;
- req.Base = 0;
- req.Size = 0x4000;
- req.AccessSpeed = ray_mem_speed;
- ret = pcmcia_request_window(link, &req, &local->rmem_handle);
+ link->resource[3]->start = 0;
+ link->resource[3]->end = 0x4000;
+ ret = pcmcia_request_window(link, link->resource[3], ray_mem_speed);
if (ret)
goto failed;
- mem.CardOffset = 0x8000;
- mem.Page = 0;
- ret = pcmcia_map_mem_page(link, local->rmem_handle, &mem);
+ ret = pcmcia_map_mem_page(link, link->resource[3], 0x8000);
if (ret)
goto failed;
- local->rmem = ioremap(req.Base, req.Size);
+ local->rmem = ioremap(link->resource[3]->start,
+ resource_size(link->resource[3]));
/*** Set up window for attribute memory ***********************************/
- req.Attributes =
+ link->resource[4]->flags |=
WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM | WIN_ENABLE | WIN_USE_WAIT;
- req.Base = 0;
- req.Size = 0x1000;
- req.AccessSpeed = ray_mem_speed;
- ret = pcmcia_request_window(link, &req, &local->amem_handle);
+ link->resource[4]->start = 0;
+ link->resource[4]->end = 0x1000;
+ ret = pcmcia_request_window(link, link->resource[4], ray_mem_speed);
if (ret)
goto failed;
- mem.CardOffset = 0x0000;
- mem.Page = 0;
- ret = pcmcia_map_mem_page(link, local->amem_handle, &mem);
+ ret = pcmcia_map_mem_page(link, link->resource[4], 0);
if (ret)
goto failed;
- local->amem = ioremap(req.Base, req.Size);
+ local->amem = ioremap(link->resource[4]->start,
+ resource_size(link->resource[4]));
dev_dbg(&link->dev, "ray_config sram=%p\n", local->sram);
dev_dbg(&link->dev, "ray_config rmem=%p\n", local->rmem);
/* Start kernel timer to wait for dl startup to complete. */
local->timer.expires = jiffies + HZ / 2;
local->timer.data = (long)local;
- local->timer.function = &verify_dl_startup;
+ local->timer.function = verify_dl_startup;
add_timer(&local->timer);
dev_dbg(&link->dev,
"ray_cs dl_startup_params started timer for verify_dl_startup\n");
local->card_status = CARD_DOING_ACQ;
}
-/*============================================================================
- After a card is removed, ray_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-=============================================================================*/
+
static void ray_release(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
ray_dev_t *local = netdev_priv(dev);
- int i;
dev_dbg(&link->dev, "ray_release\n");
iounmap(local->sram);
iounmap(local->rmem);
iounmap(local->amem);
- /* Do bother checking to see if these succeed or not */
- i = pcmcia_release_window(link, local->amem_handle);
- if (i != 0)
- dev_dbg(&link->dev, "ReleaseWindow(local->amem) ret = %x\n", i);
- i = pcmcia_release_window(link, local->rmem_handle);
- if (i != 0)
- dev_dbg(&link->dev, "ReleaseWindow(local->rmem) ret = %x\n", i);
pcmcia_disable_device(link);
dev_dbg(&link->dev, "ray_release ending\n");
}
} /* end encapsulate_frame */
-/*===========================================================================*/
-
-static void netdev_get_drvinfo(struct net_device *dev,
- struct ethtool_drvinfo *info)
-{
- strcpy(info->driver, "ray_cs");
-}
-
-static const struct ethtool_ops netdev_ethtool_ops = {
- .get_drvinfo = netdev_get_drvinfo,
-};
-
/*====================================================================*/
/*------------------------------------------------------------------*/
dev_dbg(&link->dev,
"ray_cs interrupt network \"%s\" start failed\n",
local->sparm.b4.a_current_ess_id);
- local->timer.function = &start_net;
+ local->timer.function = start_net;
} else {
dev_dbg(&link->dev,
"ray_cs interrupt network \"%s\" join failed\n",
local->sparm.b4.a_current_ess_id);
- local->timer.function = &join_net;
+ local->timer.function = join_net;
}
add_timer(&local->timer);
}
del_timer(&local->timer);
if (build_auth_frame(local, local->bss_id, OPEN_AUTH_REQUEST)) {
- local->timer.function = &join_net;
+ local->timer.function = join_net;
} else {
- local->timer.function = &authenticate_timeout;
+ local->timer.function = authenticate_timeout;
}
local->timer.expires = jiffies + HZ * 2;
local->timer.data = (long)local;
del_timer(&local->timer);
local->timer.expires = jiffies + HZ * 2;
local->timer.data = (long)local;
- local->timer.function = &join_net;
+ local->timer.function = join_net;
add_timer(&local->timer);
local->card_status = CARD_ASSOC_FAILED;
return;
static const struct file_operations ray_cs_essid_proc_fops = {
.owner = THIS_MODULE,
.write = ray_cs_essid_proc_write,
+ .llseek = noop_llseek,
};
static ssize_t int_proc_write(struct file *file, const char __user *buffer,
static const struct file_operations int_proc_fops = {
.owner = THIS_MODULE,
.write = int_proc_write,
+ .llseek = noop_llseek,
};
#endif
static struct pcmcia_driver ray_driver = {
.owner = THIS_MODULE,
- .drv = {
- .name = "ray_cs",
- },
+ .name = "ray_cs",
.probe = ray_probe,
.remove = ray_detach,
.id_table = ray_ids,
git://bbs.cooldavid.org / net-next-2.6.git / blobdiff