drivers/net: Trim trailing whitespace

[net-next-2.6.git] / drivers / net / 3c523.c

diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c
index 5dfd97f0ba9ea1b7efc15b856ddf7e0006021a0d..3364eb4aff1e0ae9a53277a7553a0eab89fd11cc 100644 (file)
--- a/drivers/net/3c523.c
+++ b/drivers/net/3c523.c
@@ -83,7 +83,7 @@
        Stuart Adamson <stuart.adamson@compsoc.net>
    Nov 2001
    added support for ethtool (jgarzik)
-       
+
    $Header: /fsys2/home/chrisb/linux-1.3.59-MCA/drivers/net/RCS/3c523.c,v 1.1 1996/02/05 01:53:46 chrisb Exp chrisb $
  */
 
@@ -434,14 +434,14 @@ static int __init do_elmc_probe(struct net_device *dev)
 
                dev->irq=irq_table[(status & ELMC_STATUS_IRQ_SELECT) >> 6];
                dev->base_addr=csr_table[(status & ELMC_STATUS_CSR_SELECT) >> 1];
-               
+
                /*
                   If we're trying to match a specified irq or IO address,
                   we'll reject a match unless it's what we're looking for.
                   Also reject it if the card is already in use.
                 */
 
-               if ((irq && irq != dev->irq) || 
+               if ((irq && irq != dev->irq) ||
                    (base_addr && base_addr != dev->base_addr)) {
                        slot = mca_find_adapter(ELMC_MCA_ID, slot + 1);
                        continue;
@@ -540,7 +540,7 @@ static int __init do_elmc_probe(struct net_device *dev)
 
        /* dump all the assorted information */
        printk(KERN_INFO "%s: IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->name,
-              dev->irq, dev->if_port ? "ex" : "in", 
+              dev->irq, dev->if_port ? "ex" : "in",
               dev->mem_start, dev->mem_end - 1);
 
        /* The hardware address for the 3c523 is stored in the first six
@@ -564,7 +564,7 @@ static int __init do_elmc_probe(struct net_device *dev)
        dev->set_multicast_list = NULL;
 #endif
        dev->ethtool_ops = &netdev_ethtool_ops;
-       
+
        /* note that we haven't actually requested the IRQ from the kernel.
           That gets done in elmc_open().  I'm not sure that's such a good idea,
           but it works, so I'll go with it. */
@@ -583,7 +583,7 @@ err_out:
        release_region(dev->base_addr, ELMC_IO_EXTENT);
        return retval;
 }
- 
+
 static void cleanup_card(struct net_device *dev)
 {
        mca_set_adapter_procfn(((struct priv *) (dev->priv))->slot, NULL, NULL);
@@ -926,7 +926,7 @@ elmc_interrupt(int irq, void *dev_id, struct pt_regs *reg_ptr)
 
        p = (struct priv *) dev->priv;
 
-       while ((stat = p->scb->status & STAT_MASK)) 
+       while ((stat = p->scb->status & STAT_MASK))
        {
                p->scb->cmd = stat;
                elmc_attn586(); /* ack inter. */
@@ -1102,7 +1102,7 @@ static void startrecv586(struct net_device *dev)
 /******************************************************
  * timeout
  */
- 
+
 static void elmc_timeout(struct net_device *dev)
 {
        struct priv *p = (struct priv *) dev->priv;
@@ -1129,7 +1129,7 @@ static void elmc_timeout(struct net_device *dev)
                elmc_open(dev);
        }
 }
- 
+
 /******************************************************
  * send frame
  */
@@ -1146,7 +1146,7 @@ static int elmc_send_packet(struct sk_buff *skb, struct net_device *dev)
        netif_stop_queue(dev);
 
        len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN;
-       
+
        if (len != skb->len)
                memset((char *) p->xmit_cbuffs[p->xmit_count], 0, ETH_ZLEN);
        memcpy((char *) p->xmit_cbuffs[p->xmit_count], (char *) (skb->data), skb->len);
@@ -1177,7 +1177,7 @@ static int elmc_send_packet(struct sk_buff *skb, struct net_device *dev)
 #else
        next_nop = (p->nop_point + 1) & 0x1;
        p->xmit_buffs[0]->size = TBD_LAST | len;
-       
+
        p->xmit_cmds[0]->cmd_link = p->nop_cmds[next_nop]->cmd_link
            = make16((p->nop_cmds[next_nop]));
        p->xmit_cmds[0]->cmd_status = p->nop_cmds[next_nop]->cmd_status = 0;
@@ -1281,7 +1281,7 @@ int __init init_module(void)
 {
        int this_dev,found = 0;
 
-       /* Loop until we either can't find any more cards, or we have MAX_3C523_CARDS */        
+       /* Loop until we either can't find any more cards, or we have MAX_3C523_CARDS */
        for(this_dev=0; this_dev<MAX_3C523_CARDS; this_dev++) {
                struct net_device *dev = alloc_etherdev(sizeof(struct priv));
                if (!dev)