* Copyright (C) 2005-2007 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
*
+ * Credits:
+ * Adrian Hunter <ext-adrian.hunter@nokia.com>:
+ * auto-placement support, read-while load support, various fixes
+ * Copyright (C) Nokia Corporation, 2007
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
int n = ed - st;
memcpy(buf, oob_buf + st, n);
buf += n;
- }
+ } else
+ break;
}
return 0;
}
/**
* onenand_read_oob - [MTD Interface] NAND write data and/or out-of-band
- * @mtd: MTD device structure
- * @from: offset to read from
- * @ops: oob operation description structure
+ * @param mtd: MTD device structure
+ * @param from: offset to read from
+ * @param ops: oob operation description structure
*/
static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
* onenand_bbt_read_oob - [MTD Interface] OneNAND read out-of-band for bbt scan
* @param mtd MTD device structure
* @param from offset to read from
- * @param @ops oob operation description structure
+ * @param ops oob operation description structure
*
* OneNAND read out-of-band data from the spare area for bbt scan
*/
static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to)
{
struct onenand_chip *this = mtd->priv;
- char *readp = this->page_buf + mtd->writesize;
+ char oobbuf[64];
int status, i;
this->command(mtd, ONENAND_CMD_READOOB, to, mtd->oobsize);
if (status)
return status;
- this->read_bufferram(mtd, ONENAND_SPARERAM, readp, 0, mtd->oobsize);
- for(i = 0; i < mtd->oobsize; i++)
- if (buf[i] != 0xFF && buf[i] != readp[i])
+ this->read_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
+ for (i = 0; i < mtd->oobsize; i++)
+ if (buf[i] != 0xFF && buf[i] != oobbuf[i])
return -EBADMSG;
return 0;
int n = ed - st;
memcpy(oob_buf + st, buf, n);
buf += n;
- }
+ } else
+ break;
}
return 0;
}
struct onenand_chip *this = mtd->priv;
int column, ret = 0, oobsize;
int written = 0;
+ u_char *oobbuf;
DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
}
/* For compatibility with NAND: Do not allow write past end of page */
- if (column + len > oobsize) {
+ if (unlikely(column + len > oobsize)) {
printk(KERN_ERR "onenand_write_oob: "
"Attempt to write past end of page\n");
return -EINVAL;
/* Grab the lock and see if the device is available */
onenand_get_device(mtd, FL_WRITING);
+ oobbuf = this->page_buf + mtd->writesize;
+
/* Loop until all data write */
while (written < len) {
int thislen = min_t(int, oobsize, len - written);
/* We send data to spare ram with oobsize
* to prevent byte access */
- memset(this->page_buf, 0xff, mtd->oobsize);
+ memset(oobbuf, 0xff, mtd->oobsize);
if (mode == MTD_OOB_AUTO)
- onenand_fill_auto_oob(mtd, this->page_buf, buf, column, thislen);
+ onenand_fill_auto_oob(mtd, oobbuf, buf, column, thislen);
else
- memcpy(this->page_buf + column, buf, thislen);
- this->write_bufferram(mtd, ONENAND_SPARERAM, this->page_buf, 0, mtd->oobsize);
+ memcpy(oobbuf + column, buf, thislen);
+ this->write_bufferram(mtd, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize);
this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
break;
}
- ret = onenand_verify_oob(mtd, this->page_buf, to);
+ ret = onenand_verify_oob(mtd, oobbuf, to);
if (ret) {
printk(KERN_ERR "onenand_write_oob: verify failed %d\n", ret);
break;
/**
* onenand_write_oob - [MTD Interface] NAND write data and/or out-of-band
- * @mtd: MTD device structure
- * @from: offset to read from
- * @ops: oob operation description structure
+ * @param mtd: MTD device structure
+ * @param to: offset to write
+ * @param ops: oob operation description structure
*/
static int onenand_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
* @param mtd MTD device structure
* @param ofs offset relative to mtd start
* @param len number of bytes to lock or unlock
+ * @param cmd lock or unlock command
*
* Lock or unlock one or more blocks
*/
}
/**
- * onenand_print_device_info - Print device ID
+ * onenand_print_device_info - Print device & version ID
* @param device device ID
+ * @param version version ID
*
- * Print device ID
+ * Print device & version ID
*/
static void onenand_print_device_info(int device, int version)
{
for (i = 0; this->ecclayout->oobfree[i].length; i++)
this->ecclayout->oobavail +=
this->ecclayout->oobfree[i].length;
+ mtd->oobavail = this->ecclayout->oobavail;
mtd->ecclayout = this->ecclayout;