cs5535: move the DIVIL MSR definition into linux/cs5535.h

[net-next-2.6.git] / arch / x86 / include / asm / geode.h

diff --git a/arch/x86/include/asm/geode.h b/arch/x86/include/asm/geode.h
index ad3c2ed7548185f7c9891236e078bb98c62cb67c..976b3f11c00977783616c3ba8b258cecb4bd3393 100644 (file)
--- a/arch/x86/include/asm/geode.h
+++ b/arch/x86/include/asm/geode.h
@@ -12,6 +12,7 @@
 
 #include <asm/processor.h>
 #include <linux/io.h>
+#include <linux/cs5535.h>
 
 /* Generic southbridge functions */
 
@@ -44,18 +45,6 @@ extern int geode_get_dev_base(unsigned int dev);
 #define MSR_LBAR_ACPI          0x5140000E
 #define MSR_LBAR_PMS           0x5140000F
 
-#define MSR_DIVIL_SOFT_RESET   0x51400017
-
-#define MSR_PIC_YSEL_LOW       0x51400020
-#define MSR_PIC_YSEL_HIGH      0x51400021
-#define MSR_PIC_ZSEL_LOW       0x51400022
-#define MSR_PIC_ZSEL_HIGH      0x51400023
-#define MSR_PIC_IRQM_LPC       0x51400025
-
-#define MSR_MFGPT_IRQ          0x51400028
-#define MSR_MFGPT_NR           0x51400029
-#define MSR_MFGPT_SETUP                0x5140002B
-
 #define MSR_LX_SPARE_MSR       0x80000011      /* DC-specific */
 
 #define MSR_GX_GLD_MSR_CONFIG  0xC0002001
@@ -115,33 +104,6 @@ extern int geode_get_dev_base(unsigned int dev);
 #define VSA_VR_MEM_SIZE                0x0200
 #define AMD_VSA_SIG            0x4132  /* signature is ascii 'VSA2' */
 #define GSW_VSA_SIG            0x534d  /* General Software signature */
-/* GPIO */
-
-#define GPIO_OUTPUT_VAL                0x00
-#define GPIO_OUTPUT_ENABLE     0x04
-#define GPIO_OUTPUT_OPEN_DRAIN 0x08
-#define GPIO_OUTPUT_INVERT     0x0C
-#define GPIO_OUTPUT_AUX1       0x10
-#define GPIO_OUTPUT_AUX2       0x14
-#define GPIO_PULL_UP           0x18
-#define GPIO_PULL_DOWN         0x1C
-#define GPIO_INPUT_ENABLE      0x20
-#define GPIO_INPUT_INVERT      0x24
-#define GPIO_INPUT_FILTER      0x28
-#define GPIO_INPUT_EVENT_COUNT 0x2C
-#define GPIO_READ_BACK         0x30
-#define GPIO_INPUT_AUX1                0x34
-#define GPIO_EVENTS_ENABLE     0x38
-#define GPIO_LOCK_ENABLE       0x3C
-#define GPIO_POSITIVE_EDGE_EN  0x40
-#define GPIO_NEGATIVE_EDGE_EN  0x44
-#define GPIO_POSITIVE_EDGE_STS 0x48
-#define GPIO_NEGATIVE_EDGE_STS 0x4C
-
-#define GPIO_MAP_X             0xE0
-#define GPIO_MAP_Y             0xE4
-#define GPIO_MAP_Z             0xE8
-#define GPIO_MAP_W             0xEC
 
 static inline u32 geode_gpio(unsigned int nr)
 {
@@ -195,36 +157,6 @@ static inline int geode_has_vsa2(void)
 }
 #endif
 
-/* MFGPTs */
-
-#define MFGPT_MAX_TIMERS       8
-#define MFGPT_TIMER_ANY                (-1)
-
-#define MFGPT_DOMAIN_WORKING   1
-#define MFGPT_DOMAIN_STANDBY   2
-#define MFGPT_DOMAIN_ANY       (MFGPT_DOMAIN_WORKING | MFGPT_DOMAIN_STANDBY)
-
-#define MFGPT_CMP1             0
-#define MFGPT_CMP2             1
-
-#define MFGPT_EVENT_IRQ                0
-#define MFGPT_EVENT_NMI                1
-#define MFGPT_EVENT_RESET      3
-
-#define MFGPT_REG_CMP1         0
-#define MFGPT_REG_CMP2         2
-#define MFGPT_REG_COUNTER      4
-#define MFGPT_REG_SETUP                6
-
-#define MFGPT_SETUP_CNTEN      (1 << 15)
-#define MFGPT_SETUP_CMP2       (1 << 14)
-#define MFGPT_SETUP_CMP1       (1 << 13)
-#define MFGPT_SETUP_SETUP      (1 << 12)
-#define MFGPT_SETUP_STOPEN     (1 << 11)
-#define MFGPT_SETUP_EXTEN      (1 << 10)
-#define MFGPT_SETUP_REVEN      (1 << 5)
-#define MFGPT_SETUP_CLKSEL     (1 << 4)
-
 static inline void geode_mfgpt_write(int timer, u16 reg, u16 value)
 {
        u32 base = geode_get_dev_base(GEODE_DEV_MFGPT);