#include <asm/blackfin.h>
#include <asm/cplbinit.h>
#include <asm/div64.h>
+#include <asm/cpu.h>
#include <asm/fixed_code.h>
#include <asm/early_printk.h>
-static DEFINE_PER_CPU(struct cpu, cpu_devices);
-
u16 _bfin_swrst;
EXPORT_SYMBOL(_bfin_swrst);
static struct bfin_memmap_entry *overlap_list[BFIN_MEMMAP_MAX] __initdata;
static struct bfin_memmap_entry new_map[BFIN_MEMMAP_MAX] __initdata;
-void __init bfin_cache_init(void)
-{
+DEFINE_PER_CPU(struct blackfin_cpudata, cpu_data);
+
#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
- generate_cplb_tables();
+void __init generate_cplb_tables(void)
+{
+ unsigned int cpu;
+
+ /* Generate per-CPU I&D CPLB tables */
+ for (cpu = 0; cpu < num_possible_cpus(); ++cpu)
+ generate_cplb_tables_cpu(cpu);
+}
#endif
+void __cpuinit bfin_setup_caches(unsigned int cpu)
+{
#ifdef CONFIG_BFIN_ICACHE
- bfin_icache_init();
- printk(KERN_INFO "Instruction Cache Enabled\n");
+#ifdef CONFIG_MPU
+ bfin_icache_init(icplb_tbl[cpu]);
+#else
+ bfin_icache_init(icplb_tables[cpu]);
+#endif
#endif
#ifdef CONFIG_BFIN_DCACHE
- bfin_dcache_init();
- printk(KERN_INFO "Data Cache Enabled"
+#ifdef CONFIG_MPU
+ bfin_dcache_init(dcplb_tbl[cpu]);
+#else
+ bfin_dcache_init(dcplb_tables[cpu]);
+#endif
+#endif
+
+ /*
+ * In cache coherence emulation mode, we need to have the
+ * D-cache enabled before running any atomic operation which
+ * might invove cache invalidation (i.e. spinlock, rwlock).
+ * So printk's are deferred until then.
+ */
+#ifdef CONFIG_BFIN_ICACHE
+ printk(KERN_INFO "Instruction Cache Enabled for CPU%u\n", cpu);
+#endif
+#ifdef CONFIG_BFIN_DCACHE
+ printk(KERN_INFO "Data Cache Enabled for CPU%u"
# if defined CONFIG_BFIN_WB
" (write-back)"
# elif defined CONFIG_BFIN_WT
" (write-through)"
# endif
- "\n");
+ "\n", cpu);
#endif
}
+void __cpuinit bfin_setup_cpudata(unsigned int cpu)
+{
+ struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, cpu);
+
+ cpudata->idle = current;
+ cpudata->loops_per_jiffy = loops_per_jiffy;
+ cpudata->cclk = get_cclk();
+ cpudata->imemctl = bfin_read_IMEM_CONTROL();
+ cpudata->dmemctl = bfin_read_DMEM_CONTROL();
+}
+
+void __init bfin_cache_init(void)
+{
+#if defined(CONFIG_BFIN_DCACHE) || defined(CONFIG_BFIN_ICACHE)
+ generate_cplb_tables();
+#endif
+ bfin_setup_caches(0);
+}
+
void __init bfin_relocate_l1_mem(void)
{
unsigned long l1_code_length;
/* record all known change-points (starting and ending addresses),
omitting those that are for empty memory regions */
chgidx = 0;
- for (i = 0; i < old_nr; i++) {
+ for (i = 0; i < old_nr; i++) {
if (map[i].size != 0) {
change_point[chgidx]->addr = map[i].addr;
change_point[chgidx++]->pentry = &map[i];
change_point[chgidx++]->pentry = &map[i];
}
}
- chg_nr = chgidx; /* true number of change-points */
+ chg_nr = chgidx; /* true number of change-points */
/* sort change-point list by memory addresses (low -> high) */
still_changing = 1;
- while (still_changing) {
+ while (still_changing) {
still_changing = 0;
- for (i = 1; i < chg_nr; i++) {
+ for (i = 1; i < chg_nr; i++) {
/* if <current_addr> > <last_addr>, swap */
/* or, if current=<start_addr> & last=<end_addr>, swap */
if ((change_point[i]->addr < change_point[i-1]->addr) ||
}
/* create a new memmap, removing overlaps */
- overlap_entries = 0; /* number of entries in the overlap table */
- new_entry = 0; /* index for creating new memmap entries */
- last_type = 0; /* start with undefined memory type */
- last_addr = 0; /* start with 0 as last starting address */
+ overlap_entries = 0; /* number of entries in the overlap table */
+ new_entry = 0; /* index for creating new memmap entries */
+ last_type = 0; /* start with undefined memory type */
+ last_addr = 0; /* start with 0 as last starting address */
/* loop through change-points, determining affect on the new memmap */
for (chgidx = 0; chgidx < chg_nr; chgidx++) {
/* keep track of all overlapping memmap entries */
if (overlap_list[i]->type > current_type)
current_type = overlap_list[i]->type;
/* continue building up new memmap based on this information */
- if (current_type != last_type) {
+ if (current_type != last_type) {
if (last_type != 0) {
new_map[new_entry].size =
change_point[chgidx]->addr - last_addr;
/* move forward only if the new size was non-zero */
if (new_map[new_entry].size != 0)
if (++new_entry >= BFIN_MEMMAP_MAX)
- break; /* no more space left for new entries */
+ break; /* no more space left for new entries */
}
if (current_type != 0) {
new_map[new_entry].addr = change_point[chgidx]->addr;
last_type = current_type;
}
}
- new_nr = new_entry; /* retain count for new entries */
+ new_nr = new_entry; /* retain count for new entries */
- /* copy new mapping into original location */
+ /* copy new mapping into original location */
memcpy(map, new_map, new_nr*sizeof(struct bfin_memmap_entry));
*pnr_map = new_nr;
* - "memmap=XXX[KkmM][@][$]XXX[KkmM]" defines a memory region
* @ from <start> to <start>+<mem>, type RAM
* $ from <start> to <start>+<mem>, type RESERVED
- *
*/
static __init void parse_cmdline_early(char *cmdline_p)
{
if (*to != ' ') {
if (*to == '$'
|| *(to + 1) == '$')
- reserved_mem_dcache_on =
- 1;
+ reserved_mem_dcache_on = 1;
if (*to == '#'
|| *(to + 1) == '#')
- reserved_mem_icache_on =
- 1;
+ reserved_mem_icache_on = 1;
}
}
} else if (!memcmp(to, "earlyprintk=", 12)) {
* [_ramend - DMA_UNCACHED_REGION,
* _ramend]: uncached DMA region
* [_ramend, physical_mem_end]: memory not managed by kernel
- *
*/
-static __init void memory_setup(void)
+static __init void memory_setup(void)
{
#ifdef CONFIG_MTD_UCLINUX
unsigned long mtd_phys = 0;
memory_end = _ramend - DMA_UNCACHED_REGION;
#ifdef CONFIG_MPU
- /* Round up to multiple of 4MB. */
+ /* Round up to multiple of 4MB */
memory_start = (_ramstart + 0x3fffff) & ~0x3fffff;
#else
memory_start = PAGE_ALIGN(_ramstart);
end_pfn = memory_end >> PAGE_SHIFT;
/*
- * give all the memory to the bootmap allocator, tell it to put the
+ * give all the memory to the bootmap allocator, tell it to put the
* boot mem_map at the start of memory.
*/
bootmap_size = init_bootmem_node(NODE_DATA(0),
bfin_write_SWRST(_bfin_swrst | DOUBLE_FAULT);
#endif
+#ifdef CONFIG_SMP
+ if (_bfin_swrst & SWRST_DBL_FAULT_A) {
+#else
if (_bfin_swrst & RESET_DOUBLE) {
+#endif
printk(KERN_EMERG "Recovering from DOUBLE FAULT event\n");
#ifdef CONFIG_DEBUG_DOUBLEFAULT
/* We assume the crashing kernel, and the current symbol table match */
printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
- cclk / 1000000, sclk / 1000000);
+ cclk / 1000000, sclk / 1000000);
if (ANOMALY_05000273 && (cclk >> 1) <= sclk)
printk("\n\n\nANOMALY_05000273: CCLK must be >= 2*SCLK !!!\n\n\n");
BUG_ON((char *)&safe_user_instruction - (char *)&fixed_code_start
!= SAFE_USER_INSTRUCTION - FIXED_CODE_START);
+#ifdef CONFIG_SMP
+ platform_init_cpus();
+#endif
init_exception_vectors();
- bfin_cache_init();
+ bfin_cache_init(); /* Initialize caches for the boot CPU */
}
static int __init topology_init(void)
{
- int cpu;
+ unsigned int cpu;
+ /* Record CPU-private information for the boot processor. */
+ bfin_setup_cpudata(0);
for_each_possible_cpu(cpu) {
- struct cpu *c = &per_cpu(cpu_devices, cpu);
-
- register_cpu(c, cpu);
+ register_cpu(&per_cpu(cpu_data, cpu).cpu, cpu);
}
return 0;
char *cpu, *mmu, *fpu, *vendor, *cache;
uint32_t revid;
- u_long cclk = 0, sclk = 0;
+ u_long sclk = 0;
u_int icache_size = BFIN_ICACHESIZE / 1024, dcache_size = 0, dsup_banks = 0;
+ struct blackfin_cpudata *cpudata = &per_cpu(cpu_data, *(unsigned int *)v);
cpu = CPU;
mmu = "none";
fpu = "none";
revid = bfin_revid();
- cclk = get_cclk();
sclk = get_sclk();
switch (bfin_read_CHIPID() & CHIPID_MANUFACTURE) {
break;
}
- seq_printf(m, "processor\t: %d\n"
- "vendor_id\t: %s\n",
- *(unsigned int *)v,
- vendor);
+ seq_printf(m, "processor\t: %d\n" "vendor_id\t: %s\n",
+ *(unsigned int *)v, vendor);
if (CPUID == bfin_cpuid())
seq_printf(m, "cpu family\t: 0x%04x\n", CPUID);
seq_printf(m, "model name\t: ADSP-%s %lu(MHz CCLK) %lu(MHz SCLK) (%s)\n"
"stepping\t: %d\n",
- cpu, cclk/1000000, sclk/1000000,
+ cpu, cpudata->cclk/1000000, sclk/1000000,
#ifdef CONFIG_MPU
"mpu on",
#else
revid);
seq_printf(m, "cpu MHz\t\t: %lu.%03lu/%lu.%03lu\n",
- cclk/1000000, cclk%1000000,
+ cpudata->cclk/1000000, cpudata->cclk%1000000,
sclk/1000000, sclk%1000000);
seq_printf(m, "bogomips\t: %lu.%02lu\n"
"Calibration\t: %lu loops\n",
- (loops_per_jiffy * HZ) / 500000,
- ((loops_per_jiffy * HZ) / 5000) % 100,
- (loops_per_jiffy * HZ));
+ (cpudata->loops_per_jiffy * HZ) / 500000,
+ ((cpudata->loops_per_jiffy * HZ) / 5000) % 100,
+ (cpudata->loops_per_jiffy * HZ));
/* Check Cache configutation */
- switch (bfin_read_DMEM_CONTROL() & (1 << DMC0_P | 1 << DMC1_P)) {
+ switch (cpudata->dmemctl & (1 << DMC0_P | 1 << DMC1_P)) {
case ACACHE_BSRAM:
cache = "dbank-A/B\t: cache/sram";
dcache_size = 16;
}
/* Is it turned on? */
- if ((bfin_read_DMEM_CONTROL() & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE))
+ if ((cpudata->dmemctl & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE))
dcache_size = 0;
- if ((bfin_read_IMEM_CONTROL() & (IMC | ENICPLB)) != (IMC | ENICPLB))
+ if ((cpudata->imemctl & (IMC | ENICPLB)) != (IMC | ENICPLB))
icache_size = 0;
seq_printf(m, "cache size\t: %d KB(L1 icache) "
"dcache setup\t: %d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n",
dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS,
BFIN_DLINES);
+#ifdef __ARCH_SYNC_CORE_DCACHE
+ seq_printf(m,
+ "SMP Dcache Flushes\t: %lu\n\n",
+ per_cpu(cpu_data, *(unsigned int *)v).dcache_invld_count);
+#endif
#ifdef CONFIG_BFIN_ICACHE_LOCK
- switch ((bfin_read_IMEM_CONTROL() >> 3) & WAYALL_L) {
+ switch ((cpudata->imemctl >> 3) & WAYALL_L) {
case WAY0_L:
seq_printf(m, "Way0 Locked-Down\n");
break;
default:
seq_printf(m, "No Ways are locked\n");
}
+#endif
+ if (*(unsigned int *)v != NR_CPUS-1)
+ return 0;
+
+#if L2_LENGTH
+ seq_printf(m, "L2 SRAM\t\t: %dKB\n", L2_LENGTH/0x400);
#endif
seq_printf(m, "board name\t: %s\n", bfin_board_name);
seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n",
((int)memory_end - (int)_stext) >> 10,
_stext,
(void *)memory_end);
+ seq_printf(m, "\n");
return 0;
}
git://bbs.cooldavid.org / net-next-2.6.git / blobdiff