ISAPNP ISA PnP code is enabled.
ISDN Appropriate ISDN support is enabled.
JOY Appropriate joystick support is enabled.
+ KGDB Kernel debugger support is enabled.
KVM Kernel Virtual Machine support is enabled.
LIBATA Libata driver is enabled
LP Printer support is enabled.
acpi= [HW,ACPI,X86]
Advanced Configuration and Power Interface
- Format: { force | off | ht | strict | noirq | rsdt }
+ Format: { force | off | strict | noirq | rsdt }
force -- enable ACPI if default was off
off -- disable ACPI if default was on
noirq -- do not use ACPI for IRQ routing
- ht -- run only enough ACPI to enable Hyper Threading
strict -- Be less tolerant of platforms that are not
strictly ACPI specification compliant.
rsdt -- prefer RSDT over (default) XSDT
no: ACPI OperationRegions are not marked as reserved,
no further checks are performed.
- ad1848= [HW,OSS]
- Format: <io>,<irq>,<dma>,<dma2>,<type>
-
add_efi_memmap [EFI; X86] Include EFI memory map in
kernel's map of available physical RAM.
advansys= [HW,SCSI]
See header of drivers/scsi/advansys.c.
- advwdt= [HW,WDT] Advantech WDT
- Format: <iostart>,<iostop>
-
- aedsp16= [HW,OSS] Audio Excel DSP 16
- Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq>
- See also header of sound/oss/aedsp16.c.
-
agp= [AGP]
{ off | try_unsupported }
off: disable AGP support
aic79xx= [HW,SCSI]
See Documentation/scsi/aic79xx.txt.
+ ALSA [HW,ALSA]
+ See Documentation/sound/alsa/alsa-parameters.txt
+
alignment= [KNL,ARM]
Allow the default userspace alignment fault handler
behaviour to be specified. Bit 0 enables warnings,
Disable PIN 1 of APIC timer
Can be useful to work around chipset bugs.
- dmasound= [HW,OSS] Sound subsystem buffers
-
dma_debug=off If the kernel is compiled with DMA_API_DEBUG support,
this option disables the debugging code at boot.
The VGA output is eventually overwritten by the real
console.
+ ekgdboc= [X86,KGDB] Allow early kernel console debugging
+ ekgdboc=kbd
+
+ This is desgined to be used in conjunction with
+ the boot argument: earlyprintk=vga
+
eata= [HW,SCSI]
edd= [EDD]
Default value is 0.
Value can be changed at runtime via /selinux/enforce.
+ erst_disable [ACPI]
+ Disable Error Record Serialization Table (ERST)
+ support.
+
ether= [HW,NET] Ethernet cards parameters
This option is obsoleted by the "netdev=" option, which
has equivalent usage. See its documentation for details.
- eurwdt= [HW,WDT] Eurotech CPU-1220/1410 onboard watchdog.
- Format: <io>[,<irq>]
-
failslab=
fail_page_alloc=
fail_make_request=[KNL]
hd= [EIDE] (E)IDE hard drive subsystem geometry
Format: <cyl>,<head>,<sect>
+ hest_disable [ACPI]
+ Disable Hardware Error Source Table (HEST) support;
+ corresponding firmware-first mode error processing
+ logic will be disabled.
+
highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact
size of <nn>. This works even on boxes that have no
highmem otherwise. This also works to reduce highmem
use the HighMem zone if it exists, and the Normal
zone if it does not.
- kgdboc= [HW] kgdb over consoles.
- Requires a tty driver that supports console polling.
- (only serial supported for now)
- Format: <serial_device>[,baud]
+ kgdbdbgp= [KGDB,HW] kgdb over EHCI usb debug port.
+ Format: <Controller#>[,poll interval]
+ The controller # is the number of the ehci usb debug
+ port as it is probed via PCI. The poll interval is
+ optional and is the number seconds in between
+ each poll cycle to the debug port in case you need
+ the functionality for interrupting the kernel with
+ gdb or control-c on the dbgp connection. When
+ not using this parameter you use sysrq-g to break into
+ the kernel debugger.
+
+ kgdboc= [KGDB,HW] kgdb over consoles.
+ Requires a tty driver that supports console polling,
+ or a supported polling keyboard driver (non-usb).
+ Serial only format: <serial_device>[,baud]
+ keyboard only format: kbd
+ keyboard and serial format: kbd,<serial_device>[,baud]
+
+ kgdbwait [KGDB] Stop kernel execution and enter the
+ kernel debugger at the earliest opportunity.
kmac= [MIPS] korina ethernet MAC address.
Configure the RouterBoard 532 series on-chip
* nohrst, nosrst, norst: suppress hard, soft
and both resets.
+ * dump_id: dump IDENTIFY data.
+
If there are multiple matching configurations changing
the same attribute, the last one is used.
that the amount of memory usable for all allocations
is not too small.
- mpu401= [HW,OSS]
- Format: <io>,<irq>
-
MTD_Partition= [MTD]
Format: <name>,<region-number>,<size>,<offset>
For example, to override I2C bus2:
omap_mux=i2c2_scl.i2c2_scl=0x100,i2c2_sda.i2c2_sda=0x100
- opl3= [HW,OSS]
- Format: <io>
-
oprofile.timer= [HW]
Use timer interrupt instead of performance counters
perfmon on Intel CPUs instead of the
CPU specific event set.
+ OSS [HW,OSS]
+ See Documentation/sound/oss/oss-parameters.txt
+
osst= [HW,SCSI] SCSI Tape Driver
Format: <buffer_size>,<write_threshold>
See also Documentation/scsi/st.txt.
Currently this function knows 686a and 8231 chips.
Format: [spp|ps2|epp|ecp|ecpepp]
- pas2= [HW,OSS] Format:
- <io>,<irq>,<dma>,<dma16>,<sb_io>,<sb_irq>,<sb_dma>,<sb_dma16>
-
pas16= [HW,SCSI]
See header of drivers/scsi/pas16.c.
[HW,MOUSE] Controls Logitech smartscroll autorepeat.
0 = disabled, 1 = enabled (default).
- pss= [HW,OSS] Personal Sound System (ECHO ESC614)
- Format:
- <io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq>
-
pt. [PARIDE]
See Documentation/blockdev/paride.txt.
sched_debug [KNL] Enables verbose scheduler debug messages.
- sc1200wdt= [HW,WDT] SC1200 WDT (watchdog) driver
- Format: <io>[,<timeout>[,<isapnp>]]
-
scsi_debug_*= [SCSI]
See drivers/scsi/scsi_debug.c.
1: Fast pin select (default)
2: ATC IRMode
- snd-ad1816a= [HW,ALSA]
-
- snd-ad1848= [HW,ALSA]
-
- snd-ali5451= [HW,ALSA]
-
- snd-als100= [HW,ALSA]
-
- snd-als4000= [HW,ALSA]
-
- snd-azt2320= [HW,ALSA]
-
- snd-cmi8330= [HW,ALSA]
-
- snd-cmipci= [HW,ALSA]
-
- snd-cs4231= [HW,ALSA]
-
- snd-cs4232= [HW,ALSA]
-
- snd-cs4236= [HW,ALSA]
-
- snd-cs4281= [HW,ALSA]
-
- snd-cs46xx= [HW,ALSA]
-
- snd-dt019x= [HW,ALSA]
-
- snd-dummy= [HW,ALSA]
-
- snd-emu10k1= [HW,ALSA]
-
- snd-ens1370= [HW,ALSA]
-
- snd-ens1371= [HW,ALSA]
-
- snd-es968= [HW,ALSA]
-
- snd-es1688= [HW,ALSA]
-
- snd-es18xx= [HW,ALSA]
-
- snd-es1938= [HW,ALSA]
-
- snd-es1968= [HW,ALSA]
-
- snd-fm801= [HW,ALSA]
-
- snd-gusclassic= [HW,ALSA]
-
- snd-gusextreme= [HW,ALSA]
-
- snd-gusmax= [HW,ALSA]
-
- snd-hdsp= [HW,ALSA]
-
- snd-ice1712= [HW,ALSA]
-
- snd-intel8x0= [HW,ALSA]
-
- snd-interwave= [HW,ALSA]
-
- snd-interwave-stb=
- [HW,ALSA]
-
- snd-korg1212= [HW,ALSA]
-
- snd-maestro3= [HW,ALSA]
-
- snd-mpu401= [HW,ALSA]
-
- snd-mtpav= [HW,ALSA]
-
- snd-nm256= [HW,ALSA]
-
- snd-opl3sa2= [HW,ALSA]
-
- snd-opti92x-ad1848=
- [HW,ALSA]
-
- snd-opti92x-cs4231=
- [HW,ALSA]
-
- snd-opti93x= [HW,ALSA]
-
- snd-pmac= [HW,ALSA]
-
- snd-rme32= [HW,ALSA]
-
- snd-rme96= [HW,ALSA]
-
- snd-rme9652= [HW,ALSA]
-
- snd-sb8= [HW,ALSA]
-
- snd-sb16= [HW,ALSA]
-
- snd-sbawe= [HW,ALSA]
-
- snd-serial= [HW,ALSA]
-
- snd-sgalaxy= [HW,ALSA]
-
- snd-sonicvibes= [HW,ALSA]
-
- snd-sun-amd7930=
- [HW,ALSA]
-
- snd-sun-cs4231= [HW,ALSA]
-
- snd-trident= [HW,ALSA]
-
- snd-usb-audio= [HW,ALSA,USB]
-
- snd-via82xx= [HW,ALSA]
-
- snd-virmidi= [HW,ALSA]
-
- snd-wavefront= [HW,ALSA]
-
- snd-ymfpci= [HW,ALSA]
-
softlockup_panic=
[KNL] Should the soft-lockup detector generate panics.
spia_pedr=
spia_peddr=
- sscape= [HW,OSS]
- Format: <io>,<irq>,<dma>,<mpu_io>,<mpu_irq>
-
st= [HW,SCSI] SCSI tape parameters (buffers, etc.)
See Documentation/scsi/st.txt.
to facilitate early boot debugging.
See also Documentation/trace/events.txt
- trix= [HW,OSS] MediaTrix AudioTrix Pro
- Format:
- <io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
-
tsc= Disable clocksource-must-verify flag for TSC.
Format: <string>
[x86] reliable: mark tsc clocksource as reliable, this
u14-34f= [HW,SCSI] UltraStor 14F/34F SCSI host adapter
See header of drivers/scsi/u14-34f.c.
- uart401= [HW,OSS]
- Format: <io>,<irq>
-
- uart6850= [HW,OSS]
- Format: <io>,<irq>
-
uhash_entries= [KNL,NET]
Set number of hash buckets for UDP/UDP-Lite connections
overridden by individual drivers. 0 will hide
cursors, 1 will display them.
- waveartist= [HW,OSS]
- Format: <io>,<irq>,<dma>,<dma2>
-
wd33c93= [HW,SCSI]
See header of drivers/scsi/wd33c93.c.
wd7000= [HW,SCSI]
See header of drivers/scsi/wd7000.c.
- wdt= [WDT] Watchdog
- See Documentation/watchdog/wdt.txt.
+ watchdog timers [HW,WDT] For information on watchdog timers,
+ see Documentation/watchdog/watchdog-parameters.txt
+ or other driver-specific files in the
+ Documentation/watchdog/ directory.
x2apic_phys [X86-64,APIC] Use x2apic physical mode instead of
default x2apic cluster mode on platforms
TODO:
- Add documentation for ALSA options.
Add more DRM drivers.