Unit: millivolt
RW
+in[0-*]_lcrit Voltage critical min value.
+ Unit: millivolt
+ RW
+ If voltage drops to or below this limit, the system may
+ take drastic action such as power down or reset. At the very
+ least, it should report a fault.
+
in[0-*]_max Voltage max value.
Unit: millivolt
RW
+in[0-*]_crit Voltage critical max value.
+ Unit: millivolt
+ RW
+ If voltage reaches or exceeds this limit, the system may
+ take drastic action such as power down or reset. At the very
+ least, it should report a fault.
+
in[0-*]_input Voltage input value.
Unit: millivolt
RO
Unit: millidegree Celsius
RO
-temp[1-*]_crit Temperature critical value, typically greater than
+temp[1-*]_crit Temperature critical max value, typically greater than
corresponding temp_max values.
Unit: millidegree Celsius
RW
from the critical value.
RW
+temp[1-*]_lcrit Temperature critical min value, typically lower than
+ corresponding temp_min values.
+ Unit: millidegree Celsius
+ RW
+
temp[1-*]_offset
Temperature offset which is added to the temperature reading
by the chip.
* Currents *
************
-Note that no known chip provides current measurements as of writing,
-so this part is theoretical, so to say.
-
curr[1-*]_max Current max value
Unit: milliampere
RW
implementation.
in[0-*]_alarm
+curr[1-*]_alarm
fan[1-*]_alarm
temp[1-*]_alarm
Channel alarm
in[0-*]_min_alarm
in[0-*]_max_alarm
+curr[1-*]_min_alarm
+curr[1-*]_max_alarm
fan[1-*]_min_alarm
fan[1-*]_max_alarm
temp[1-*]_min_alarm
RW
in[0-*]_beep
+curr[1-*]_beep
fan[1-*]_beep
temp[1-*]_beep
Channel beep