]> bbs.cooldavid.org Git - net-next-2.6.git/blob - scripts/Makefile.build
ftrace/x86: Add support for C version of recordmcount
[net-next-2.6.git] / scripts / Makefile.build
1 # ==========================================================================
2 # Building
3 # ==========================================================================
4
5 src := $(obj)
6
7 PHONY := __build
8 __build:
9
10 # Init all relevant variables used in kbuild files so
11 # 1) they have correct type
12 # 2) they do not inherit any value from the environment
13 obj-y :=
14 obj-m :=
15 lib-y :=
16 lib-m :=
17 always :=
18 targets :=
19 subdir-y :=
20 subdir-m :=
21 EXTRA_AFLAGS   :=
22 EXTRA_CFLAGS   :=
23 EXTRA_CPPFLAGS :=
24 EXTRA_LDFLAGS  :=
25 asflags-y  :=
26 ccflags-y  :=
27 cppflags-y :=
28 ldflags-y  :=
29
30 subdir-asflags-y :=
31 subdir-ccflags-y :=
32
33 # Read auto.conf if it exists, otherwise ignore
34 -include include/config/auto.conf
35
36 include scripts/Kbuild.include
37
38 # For backward compatibility check that these variables do not change
39 save-cflags := $(CFLAGS)
40
41 # The filename Kbuild has precedence over Makefile
42 kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
43 kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile)
44 include $(kbuild-file)
45
46 # If the save-* variables changed error out
47 ifeq ($(KBUILD_NOPEDANTIC),)
48         ifneq ("$(save-cflags)","$(CFLAGS)")
49                 $(error CFLAGS was changed in "$(kbuild-file)". Fix it to use EXTRA_CFLAGS)
50         endif
51 endif
52 include scripts/Makefile.lib
53
54 ifdef host-progs
55 ifneq ($(hostprogs-y),$(host-progs))
56 $(warning kbuild: $(obj)/Makefile - Usage of host-progs is deprecated. Please replace with hostprogs-y!)
57 hostprogs-y += $(host-progs)
58 endif
59 endif
60
61 # Do not include host rules unless needed
62 ifneq ($(hostprogs-y)$(hostprogs-m),)
63 include scripts/Makefile.host
64 endif
65
66 ifneq ($(KBUILD_SRC),)
67 # Create output directory if not already present
68 _dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
69
70 # Create directories for object files if directory does not exist
71 # Needed when obj-y := dir/file.o syntax is used
72 _dummy := $(foreach d,$(obj-dirs), $(shell [ -d $(d) ] || mkdir -p $(d)))
73 endif
74
75 ifndef obj
76 $(warning kbuild: Makefile.build is included improperly)
77 endif
78
79 # ===========================================================================
80
81 ifneq ($(strip $(lib-y) $(lib-m) $(lib-n) $(lib-)),)
82 lib-target := $(obj)/lib.a
83 endif
84
85 ifneq ($(strip $(obj-y) $(obj-m) $(obj-n) $(obj-) $(subdir-m) $(lib-target)),)
86 builtin-target := $(obj)/built-in.o
87 endif
88
89 modorder-target := $(obj)/modules.order
90
91 # We keep a list of all modules in $(MODVERDIR)
92
93 __build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
94          $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \
95          $(subdir-ym) $(always)
96         @:
97
98 # Linus' kernel sanity checking tool
99 ifneq ($(KBUILD_CHECKSRC),0)
100   ifeq ($(KBUILD_CHECKSRC),2)
101     quiet_cmd_force_checksrc = CHECK   $<
102           cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
103   else
104       quiet_cmd_checksrc     = CHECK   $<
105             cmd_checksrc     = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
106   endif
107 endif
108
109 # Do section mismatch analysis for each module/built-in.o
110 ifdef CONFIG_DEBUG_SECTION_MISMATCH
111   cmd_secanalysis = ; scripts/mod/modpost $@
112 endif
113
114 # Compile C sources (.c)
115 # ---------------------------------------------------------------------------
116
117 # Default is built-in, unless we know otherwise
118 modkern_cflags =                                          \
119         $(if $(part-of-module),                           \
120                 $(KBUILD_CFLAGS_MODULE) $(CFLAGS_MODULE), \
121                 $(KBUILD_CFLAGS_KERNEL) $(CFLAGS_KERNEL))
122 quiet_modtag := $(empty)   $(empty)
123
124 $(real-objs-m)        : part-of-module := y
125 $(real-objs-m:.o=.i)  : part-of-module := y
126 $(real-objs-m:.o=.s)  : part-of-module := y
127 $(real-objs-m:.o=.lst): part-of-module := y
128
129 $(real-objs-m)        : quiet_modtag := [M]
130 $(real-objs-m:.o=.i)  : quiet_modtag := [M]
131 $(real-objs-m:.o=.s)  : quiet_modtag := [M]
132 $(real-objs-m:.o=.lst): quiet_modtag := [M]
133
134 $(obj-m)              : quiet_modtag := [M]
135
136 # Default for not multi-part modules
137 modname = $(basetarget)
138
139 $(multi-objs-m)         : modname = $(modname-multi)
140 $(multi-objs-m:.o=.i)   : modname = $(modname-multi)
141 $(multi-objs-m:.o=.s)   : modname = $(modname-multi)
142 $(multi-objs-m:.o=.lst) : modname = $(modname-multi)
143 $(multi-objs-y)         : modname = $(modname-multi)
144 $(multi-objs-y:.o=.i)   : modname = $(modname-multi)
145 $(multi-objs-y:.o=.s)   : modname = $(modname-multi)
146 $(multi-objs-y:.o=.lst) : modname = $(modname-multi)
147
148 quiet_cmd_cc_s_c = CC $(quiet_modtag)  $@
149 cmd_cc_s_c       = $(CC) $(c_flags) -fverbose-asm -S -o $@ $<
150
151 $(obj)/%.s: $(src)/%.c FORCE
152         $(call if_changed_dep,cc_s_c)
153
154 quiet_cmd_cc_i_c = CPP $(quiet_modtag) $@
155 cmd_cc_i_c       = $(CPP) $(c_flags)   -o $@ $<
156
157 $(obj)/%.i: $(src)/%.c FORCE
158         $(call if_changed_dep,cc_i_c)
159
160 cmd_gensymtypes =                                                           \
161     $(CPP) -D__GENKSYMS__ $(c_flags) $< |                                   \
162     $(GENKSYMS) $(if $(1), -T $(2)) -a $(ARCH)                              \
163      $(if $(KBUILD_PRESERVE),-p)                                            \
164      -r $(firstword $(wildcard $(2:.symtypes=.symref) /dev/null))
165
166 quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
167 cmd_cc_symtypes_c =                                                         \
168     set -e;                                                                 \
169     $(call cmd_gensymtypes,true,$@) >/dev/null;                             \
170     test -s $@ || rm -f $@
171
172 $(obj)/%.symtypes : $(src)/%.c FORCE
173         $(call cmd,cc_symtypes_c)
174
175 # C (.c) files
176 # The C file is compiled and updated dependency information is generated.
177 # (See cmd_cc_o_c + relevant part of rule_cc_o_c)
178
179 quiet_cmd_cc_o_c = CC $(quiet_modtag)  $@
180
181 ifndef CONFIG_MODVERSIONS
182 cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
183
184 else
185 # When module versioning is enabled the following steps are executed:
186 # o compile a .tmp_<file>.o from <file>.c
187 # o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does
188 #   not export symbols, we just rename .tmp_<file>.o to <file>.o and
189 #   are done.
190 # o otherwise, we calculate symbol versions using the good old
191 #   genksyms on the preprocessed source and postprocess them in a way
192 #   that they are usable as a linker script
193 # o generate <file>.o from .tmp_<file>.o using the linker to
194 #   replace the unresolved symbols __crc_exported_symbol with
195 #   the actual value of the checksum generated by genksyms
196
197 cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $<
198 cmd_modversions =                                                               \
199         if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then             \
200                 $(call cmd_gensymtypes,$(KBUILD_SYMTYPES),$(@:.o=.symtypes))    \
201                     > $(@D)/.tmp_$(@F:.o=.ver);                                 \
202                                                                                 \
203                 $(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F)                      \
204                         -T $(@D)/.tmp_$(@F:.o=.ver);                            \
205                 rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver);                \
206         else                                                                    \
207                 mv -f $(@D)/.tmp_$(@F) $@;                                      \
208         fi;
209 endif
210
211 ifdef CONFIG_FTRACE_MCOUNT_RECORD
212 ifdef BUILD_C_RECORDMCOUNT
213 cmd_record_mcount = $(srctree)/scripts/recordmcount "$(@)";
214 else
215 cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH)" \
216         "$(if $(CONFIG_CPU_BIG_ENDIAN),big,little)" \
217         "$(if $(CONFIG_64BIT),64,32)" \
218         "$(OBJDUMP)" "$(OBJCOPY)" "$(CC)" "$(LD)" "$(NM)" "$(RM)" "$(MV)" \
219         "$(if $(part-of-module),1,0)" "$(@)";
220 endif
221 endif
222
223 define rule_cc_o_c
224         $(call echo-cmd,checksrc) $(cmd_checksrc)                         \
225         $(call echo-cmd,cc_o_c) $(cmd_cc_o_c);                            \
226         $(cmd_modversions)                                                \
227         $(call echo-cmd,record_mcount)                                    \
228         $(cmd_record_mcount)                                              \
229         scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' >    \
230                                                       $(dot-target).tmp;  \
231         rm -f $(depfile);                                                 \
232         mv -f $(dot-target).tmp $(dot-target).cmd
233 endef
234
235 # Built-in and composite module parts
236 $(obj)/%.o: $(src)/%.c FORCE
237         $(call cmd,force_checksrc)
238         $(call if_changed_rule,cc_o_c)
239
240 # Single-part modules are special since we need to mark them in $(MODVERDIR)
241
242 $(single-used-m): $(obj)/%.o: $(src)/%.c FORCE
243         $(call cmd,force_checksrc)
244         $(call if_changed_rule,cc_o_c)
245         @{ echo $(@:.o=.ko); echo $@; } > $(MODVERDIR)/$(@F:.o=.mod)
246
247 quiet_cmd_cc_lst_c = MKLST   $@
248       cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \
249                      $(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \
250                                      System.map $(OBJDUMP) > $@
251
252 $(obj)/%.lst: $(src)/%.c FORCE
253         $(call if_changed_dep,cc_lst_c)
254
255 # Compile assembler sources (.S)
256 # ---------------------------------------------------------------------------
257
258 modkern_aflags := $(KBUILD_AFLAGS_KERNEL) $(AFLAGS_KERNEL)
259
260 $(real-objs-m)      : modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
261 $(real-objs-m:.o=.s): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
262
263 quiet_cmd_as_s_S = CPP $(quiet_modtag) $@
264 cmd_as_s_S       = $(CPP) $(a_flags)   -o $@ $< 
265
266 $(obj)/%.s: $(src)/%.S FORCE
267         $(call if_changed_dep,as_s_S)
268
269 quiet_cmd_as_o_S = AS $(quiet_modtag)  $@
270 cmd_as_o_S       = $(CC) $(a_flags) -c -o $@ $<
271
272 $(obj)/%.o: $(src)/%.S FORCE
273         $(call if_changed_dep,as_o_S)
274
275 targets += $(real-objs-y) $(real-objs-m) $(lib-y)
276 targets += $(extra-y) $(MAKECMDGOALS) $(always)
277
278 # Linker scripts preprocessor (.lds.S -> .lds)
279 # ---------------------------------------------------------------------------
280 quiet_cmd_cpp_lds_S = LDS     $@
281       cmd_cpp_lds_S = $(CPP) $(cpp_flags) -P -C -U$(ARCH) \
282                              -D__ASSEMBLY__ -DLINKER_SCRIPT -o $@ $<
283
284 $(obj)/%.lds: $(src)/%.lds.S FORCE
285         $(call if_changed_dep,cpp_lds_S)
286
287 # Build the compiled-in targets
288 # ---------------------------------------------------------------------------
289
290 # To build objects in subdirs, we need to descend into the directories
291 $(sort $(subdir-obj-y)): $(subdir-ym) ;
292
293 #
294 # Rule to compile a set of .o files into one .o file
295 #
296 ifdef builtin-target
297 quiet_cmd_link_o_target = LD      $@
298 # If the list of objects to link is empty, just create an empty built-in.o
299 cmd_link_o_target = $(if $(strip $(obj-y)),\
300                       $(LD) $(ld_flags) -r -o $@ $(filter $(obj-y), $^) \
301                       $(cmd_secanalysis),\
302                       rm -f $@; $(AR) rcs $@)
303
304 $(builtin-target): $(obj-y) FORCE
305         $(call if_changed,link_o_target)
306
307 targets += $(builtin-target)
308 endif # builtin-target
309
310 #
311 # Rule to create modules.order file
312 #
313 # Create commands to either record .ko file or cat modules.order from
314 # a subdirectory
315 modorder-cmds =                                         \
316         $(foreach m, $(modorder),                       \
317                 $(if $(filter %/modules.order, $m),     \
318                         cat $m;, echo kernel/$m;))
319
320 $(modorder-target): $(subdir-ym) FORCE
321         $(Q)(cat /dev/null; $(modorder-cmds)) > $@
322
323 #
324 # Rule to compile a set of .o files into one .a file
325 #
326 ifdef lib-target
327 quiet_cmd_link_l_target = AR      $@
328 cmd_link_l_target = rm -f $@; $(AR) rcs $@ $(lib-y)
329
330 $(lib-target): $(lib-y) FORCE
331         $(call if_changed,link_l_target)
332
333 targets += $(lib-target)
334 endif
335
336 #
337 # Rule to link composite objects
338 #
339 #  Composite objects are specified in kbuild makefile as follows:
340 #    <composite-object>-objs := <list of .o files>
341 #  or
342 #    <composite-object>-y    := <list of .o files>
343 link_multi_deps =                     \
344 $(filter $(addprefix $(obj)/,         \
345 $($(subst $(obj)/,,$(@:.o=-objs)))    \
346 $($(subst $(obj)/,,$(@:.o=-y)))), $^)
347  
348 quiet_cmd_link_multi-y = LD      $@
349 cmd_link_multi-y = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps) $(cmd_secanalysis)
350
351 quiet_cmd_link_multi-m = LD [M]  $@
352 cmd_link_multi-m = $(cmd_link_multi-y)
353
354 # We would rather have a list of rules like
355 #       foo.o: $(foo-objs)
356 # but that's not so easy, so we rather make all composite objects depend
357 # on the set of all their parts
358 $(multi-used-y) : %.o: $(multi-objs-y) FORCE
359         $(call if_changed,link_multi-y)
360
361 $(multi-used-m) : %.o: $(multi-objs-m) FORCE
362         $(call if_changed,link_multi-m)
363         @{ echo $(@:.o=.ko); echo $(link_multi_deps); } > $(MODVERDIR)/$(@F:.o=.mod)
364
365 targets += $(multi-used-y) $(multi-used-m)
366
367
368 # Descending
369 # ---------------------------------------------------------------------------
370
371 PHONY += $(subdir-ym)
372 $(subdir-ym):
373         $(Q)$(MAKE) $(build)=$@
374
375 # Add FORCE to the prequisites of a target to force it to be always rebuilt.
376 # ---------------------------------------------------------------------------
377
378 PHONY += FORCE
379
380 FORCE:
381
382 # Read all saved command lines and dependencies for the $(targets) we
383 # may be building above, using $(if_changed{,_dep}). As an
384 # optimization, we don't need to read them if the target does not
385 # exist, we will rebuild anyway in that case.
386
387 targets := $(wildcard $(sort $(targets)))
388 cmd_files := $(wildcard $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
389
390 ifneq ($(cmd_files),)
391   include $(cmd_files)
392 endif
393
394
395 # Declare the contents of the .PHONY variable as phony.  We keep that
396 # information in a variable se we can use it in if_changed and friends.
397
398 .PHONY: $(PHONY)