2 Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
3 <http://rt2x00.serialmonkey.com>
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
23 Abstract: rt2x00 generic device routines.
26 #include <linux/kernel.h>
27 #include <linux/module.h>
30 #include "rt2x00lib.h"
33 * Radio control handlers.
35 int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
40 * Don't enable the radio twice.
41 * And check if the hardware button has been disabled.
43 if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
47 * Initialize all data queues.
49 rt2x00queue_init_queues(rt2x00dev);
55 rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_ON);
59 rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_ON);
61 rt2x00leds_led_radio(rt2x00dev, true);
62 rt2x00led_led_activity(rt2x00dev, true);
64 set_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags);
69 rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
72 * Start the TX queues.
74 ieee80211_wake_queues(rt2x00dev->hw);
79 void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
81 if (!test_and_clear_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
85 * Stop the TX queues in mac80211.
87 ieee80211_stop_queues(rt2x00dev->hw);
88 rt2x00queue_stop_queues(rt2x00dev);
93 rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
98 rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_OFF);
99 rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_OFF);
100 rt2x00led_led_activity(rt2x00dev, false);
101 rt2x00leds_led_radio(rt2x00dev, false);
104 void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state)
107 * When we are disabling the RX, we should also stop the link tuner.
109 if (state == STATE_RADIO_RX_OFF)
110 rt2x00link_stop_tuner(rt2x00dev);
112 rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
115 * When we are enabling the RX, we should also start the link tuner.
117 if (state == STATE_RADIO_RX_ON)
118 rt2x00link_start_tuner(rt2x00dev);
121 static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac,
122 struct ieee80211_vif *vif)
124 struct rt2x00_dev *rt2x00dev = data;
125 struct rt2x00_intf *intf = vif_to_intf(vif);
129 * Copy all data we need during this action under the protection
130 * of a spinlock. Otherwise race conditions might occur which results
131 * into an invalid configuration.
133 spin_lock(&intf->lock);
135 delayed_flags = intf->delayed_flags;
136 intf->delayed_flags = 0;
138 spin_unlock(&intf->lock);
141 * It is possible the radio was disabled while the work had been
142 * scheduled. If that happens we should return here immediately,
143 * note that in the spinlock protected area above the delayed_flags
144 * have been cleared correctly.
146 if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
149 if (delayed_flags & DELAYED_UPDATE_BEACON)
150 rt2x00queue_update_beacon(rt2x00dev, vif, true);
153 static void rt2x00lib_intf_scheduled(struct work_struct *work)
155 struct rt2x00_dev *rt2x00dev =
156 container_of(work, struct rt2x00_dev, intf_work);
159 * Iterate over each interface and perform the
160 * requested configurations.
162 ieee80211_iterate_active_interfaces(rt2x00dev->hw,
163 rt2x00lib_intf_scheduled_iter,
168 * Interrupt context handlers.
170 static void rt2x00lib_beacondone_iter(void *data, u8 *mac,
171 struct ieee80211_vif *vif)
173 struct rt2x00_intf *intf = vif_to_intf(vif);
175 if (vif->type != NL80211_IFTYPE_AP &&
176 vif->type != NL80211_IFTYPE_ADHOC &&
177 vif->type != NL80211_IFTYPE_MESH_POINT &&
178 vif->type != NL80211_IFTYPE_WDS)
181 spin_lock(&intf->lock);
182 intf->delayed_flags |= DELAYED_UPDATE_BEACON;
183 spin_unlock(&intf->lock);
186 void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)
188 if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
191 ieee80211_iterate_active_interfaces_atomic(rt2x00dev->hw,
192 rt2x00lib_beacondone_iter,
195 ieee80211_queue_work(rt2x00dev->hw, &rt2x00dev->intf_work);
197 EXPORT_SYMBOL_GPL(rt2x00lib_beacondone);
199 void rt2x00lib_txdone(struct queue_entry *entry,
200 struct txdone_entry_desc *txdesc)
202 struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
203 struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb);
204 struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
205 enum data_queue_qid qid = skb_get_queue_mapping(entry->skb);
206 unsigned int header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
207 u8 rate_idx, rate_flags, retry_rates;
208 u8 skbdesc_flags = skbdesc->flags;
215 rt2x00queue_unmap_skb(rt2x00dev, entry->skb);
218 * Remove L2 padding which was added during
220 if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags))
221 rt2x00queue_remove_l2pad(entry->skb, header_length);
224 * If the IV/EIV data was stripped from the frame before it was
225 * passed to the hardware, we should now reinsert it again because
226 * mac80211 will expect the the same data to be present it the
227 * frame as it was passed to us.
229 if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags))
230 rt2x00crypto_tx_insert_iv(entry->skb, header_length);
233 * Send frame to debugfs immediately, after this call is completed
234 * we are going to overwrite the skb->cb array.
236 rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry->skb);
239 * Determine if the frame has been successfully transmitted.
242 test_bit(TXDONE_SUCCESS, &txdesc->flags) ||
243 test_bit(TXDONE_UNKNOWN, &txdesc->flags) ||
244 test_bit(TXDONE_FALLBACK, &txdesc->flags);
247 * Update TX statistics.
249 rt2x00dev->link.qual.tx_success += success;
250 rt2x00dev->link.qual.tx_failed += !success;
252 rate_idx = skbdesc->tx_rate_idx;
253 rate_flags = skbdesc->tx_rate_flags;
254 retry_rates = test_bit(TXDONE_FALLBACK, &txdesc->flags) ?
255 (txdesc->retry + 1) : 1;
258 * Initialize TX status
260 memset(&tx_info->status, 0, sizeof(tx_info->status));
261 tx_info->status.ack_signal = 0;
264 * Frame was send with retries, hardware tried
265 * different rates to send out the frame, at each
266 * retry it lowered the rate 1 step.
268 for (i = 0; i < retry_rates && i < IEEE80211_TX_MAX_RATES; i++) {
269 tx_info->status.rates[i].idx = rate_idx - i;
270 tx_info->status.rates[i].flags = rate_flags;
271 tx_info->status.rates[i].count = 1;
273 if (i < (IEEE80211_TX_MAX_RATES - 1))
274 tx_info->status.rates[i].idx = -1; /* terminate */
276 if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) {
278 tx_info->flags |= IEEE80211_TX_STAT_ACK;
280 rt2x00dev->low_level_stats.dot11ACKFailureCount++;
283 if (rate_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
285 rt2x00dev->low_level_stats.dot11RTSSuccessCount++;
287 rt2x00dev->low_level_stats.dot11RTSFailureCount++;
291 * Only send the status report to mac80211 when it's a frame
292 * that originated in mac80211. If this was a extra frame coming
293 * through a mac80211 library call (RTS/CTS) then we should not
294 * send the status report back.
296 if (!(skbdesc_flags & SKBDESC_NOT_MAC80211))
297 ieee80211_tx_status_irqsafe(rt2x00dev->hw, entry->skb);
299 dev_kfree_skb_irq(entry->skb);
302 * Make this entry available for reuse.
307 rt2x00dev->ops->lib->clear_entry(entry);
309 clear_bit(ENTRY_OWNER_DEVICE_DATA, &entry->flags);
310 rt2x00queue_index_inc(entry->queue, Q_INDEX_DONE);
313 * If the data queue was below the threshold before the txdone
314 * handler we must make sure the packet queue in the mac80211 stack
315 * is reenabled when the txdone handler has finished.
317 if (!rt2x00queue_threshold(entry->queue))
318 ieee80211_wake_queue(rt2x00dev->hw, qid);
320 EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
322 static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev,
323 struct rxdone_entry_desc *rxdesc)
325 struct ieee80211_supported_band *sband;
326 const struct rt2x00_rate *rate;
332 * For non-HT rates the MCS value needs to contain the
333 * actually used rate modulation (CCK or OFDM).
335 if (rxdesc->dev_flags & RXDONE_SIGNAL_MCS)
336 signal = RATE_MCS(rxdesc->rate_mode, rxdesc->signal);
338 signal = rxdesc->signal;
340 type = (rxdesc->dev_flags & RXDONE_SIGNAL_MASK);
342 sband = &rt2x00dev->bands[rt2x00dev->curr_band];
343 for (i = 0; i < sband->n_bitrates; i++) {
344 rate = rt2x00_get_rate(sband->bitrates[i].hw_value);
346 if (((type == RXDONE_SIGNAL_PLCP) &&
347 (rate->plcp == signal)) ||
348 ((type == RXDONE_SIGNAL_BITRATE) &&
349 (rate->bitrate == signal)) ||
350 ((type == RXDONE_SIGNAL_MCS) &&
351 (rate->mcs == signal))) {
356 WARNING(rt2x00dev, "Frame received with unrecognized signal, "
357 "signal=0x%.4x, type=%d.\n", signal, type);
361 void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev,
362 struct queue_entry *entry)
364 struct rxdone_entry_desc rxdesc;
366 struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status;
367 unsigned int header_length;
370 * Allocate a new sk_buffer. If no new buffer available, drop the
371 * received frame and reuse the existing buffer.
373 skb = rt2x00queue_alloc_rxskb(rt2x00dev, entry);
380 rt2x00queue_unmap_skb(rt2x00dev, entry->skb);
383 * Extract the RXD details.
385 memset(&rxdesc, 0, sizeof(rxdesc));
386 rt2x00dev->ops->lib->fill_rxdone(entry, &rxdesc);
389 * The data behind the ieee80211 header must be
390 * aligned on a 4 byte boundary.
392 header_length = ieee80211_get_hdrlen_from_skb(entry->skb);
395 * Hardware might have stripped the IV/EIV/ICV data,
396 * in that case it is possible that the data was
397 * provided seperately (through hardware descriptor)
398 * in which case we should reinsert the data into the frame.
400 if ((rxdesc.dev_flags & RXDONE_CRYPTO_IV) &&
401 (rxdesc.flags & RX_FLAG_IV_STRIPPED))
402 rt2x00crypto_rx_insert_iv(entry->skb, header_length,
404 else if (header_length &&
405 (rxdesc.size > header_length) &&
406 (rxdesc.dev_flags & RXDONE_L2PAD))
407 rt2x00queue_remove_l2pad(entry->skb, header_length);
409 rt2x00queue_align_payload(entry->skb, header_length);
411 /* Trim buffer to correct size */
412 skb_trim(entry->skb, rxdesc.size);
415 * Check if the frame was received using HT. In that case,
416 * the rate is the MCS index and should be passed to mac80211
417 * directly. Otherwise we need to translate the signal to
418 * the correct bitrate index.
420 if (rxdesc.rate_mode == RATE_MODE_CCK ||
421 rxdesc.rate_mode == RATE_MODE_OFDM) {
422 rate_idx = rt2x00lib_rxdone_read_signal(rt2x00dev, &rxdesc);
424 rxdesc.flags |= RX_FLAG_HT;
425 rate_idx = rxdesc.signal;
429 * Update extra components
431 rt2x00link_update_stats(rt2x00dev, entry->skb, &rxdesc);
432 rt2x00debug_update_crypto(rt2x00dev, &rxdesc);
434 rx_status->mactime = rxdesc.timestamp;
435 rx_status->rate_idx = rate_idx;
436 rx_status->signal = rxdesc.rssi;
437 rx_status->flag = rxdesc.flags;
438 rx_status->antenna = rt2x00dev->link.ant.active.rx;
441 * Send frame to mac80211 & debugfs.
442 * mac80211 will clean up the skb structure.
444 rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb);
445 memcpy(IEEE80211_SKB_RXCB(entry->skb), rx_status, sizeof(*rx_status));
446 ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb);
449 * Replace the skb with the freshly allocated one.
454 rt2x00dev->ops->lib->clear_entry(entry);
456 rt2x00queue_index_inc(entry->queue, Q_INDEX);
458 EXPORT_SYMBOL_GPL(rt2x00lib_rxdone);
461 * Driver initialization handlers.
463 const struct rt2x00_rate rt2x00_supported_rates[12] = {
465 .flags = DEV_RATE_CCK,
469 .mcs = RATE_MCS(RATE_MODE_CCK, 0),
472 .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
476 .mcs = RATE_MCS(RATE_MODE_CCK, 1),
479 .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
483 .mcs = RATE_MCS(RATE_MODE_CCK, 2),
486 .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE,
490 .mcs = RATE_MCS(RATE_MODE_CCK, 3),
493 .flags = DEV_RATE_OFDM,
497 .mcs = RATE_MCS(RATE_MODE_OFDM, 0),
500 .flags = DEV_RATE_OFDM,
504 .mcs = RATE_MCS(RATE_MODE_OFDM, 1),
507 .flags = DEV_RATE_OFDM,
511 .mcs = RATE_MCS(RATE_MODE_OFDM, 2),
514 .flags = DEV_RATE_OFDM,
518 .mcs = RATE_MCS(RATE_MODE_OFDM, 3),
521 .flags = DEV_RATE_OFDM,
525 .mcs = RATE_MCS(RATE_MODE_OFDM, 4),
528 .flags = DEV_RATE_OFDM,
532 .mcs = RATE_MCS(RATE_MODE_OFDM, 5),
535 .flags = DEV_RATE_OFDM,
539 .mcs = RATE_MCS(RATE_MODE_OFDM, 6),
542 .flags = DEV_RATE_OFDM,
546 .mcs = RATE_MCS(RATE_MODE_OFDM, 7),
550 static void rt2x00lib_channel(struct ieee80211_channel *entry,
551 const int channel, const int tx_power,
554 entry->center_freq = ieee80211_channel_to_frequency(channel);
555 entry->hw_value = value;
556 entry->max_power = tx_power;
557 entry->max_antenna_gain = 0xff;
560 static void rt2x00lib_rate(struct ieee80211_rate *entry,
561 const u16 index, const struct rt2x00_rate *rate)
564 entry->bitrate = rate->bitrate;
565 entry->hw_value =index;
566 entry->hw_value_short = index;
568 if (rate->flags & DEV_RATE_SHORT_PREAMBLE)
569 entry->flags |= IEEE80211_RATE_SHORT_PREAMBLE;
572 static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
573 struct hw_mode_spec *spec)
575 struct ieee80211_hw *hw = rt2x00dev->hw;
576 struct ieee80211_channel *channels;
577 struct ieee80211_rate *rates;
578 unsigned int num_rates;
582 if (spec->supported_rates & SUPPORT_RATE_CCK)
584 if (spec->supported_rates & SUPPORT_RATE_OFDM)
587 channels = kzalloc(sizeof(*channels) * spec->num_channels, GFP_KERNEL);
591 rates = kzalloc(sizeof(*rates) * num_rates, GFP_KERNEL);
593 goto exit_free_channels;
596 * Initialize Rate list.
598 for (i = 0; i < num_rates; i++)
599 rt2x00lib_rate(&rates[i], i, rt2x00_get_rate(i));
602 * Initialize Channel list.
604 for (i = 0; i < spec->num_channels; i++) {
605 rt2x00lib_channel(&channels[i],
606 spec->channels[i].channel,
607 spec->channels_info[i].tx_power1, i);
611 * Intitialize 802.11b, 802.11g
615 if (spec->supported_bands & SUPPORT_BAND_2GHZ) {
616 rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_channels = 14;
617 rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_bitrates = num_rates;
618 rt2x00dev->bands[IEEE80211_BAND_2GHZ].channels = channels;
619 rt2x00dev->bands[IEEE80211_BAND_2GHZ].bitrates = rates;
620 hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
621 &rt2x00dev->bands[IEEE80211_BAND_2GHZ];
622 memcpy(&rt2x00dev->bands[IEEE80211_BAND_2GHZ].ht_cap,
623 &spec->ht, sizeof(spec->ht));
627 * Intitialize 802.11a
629 * Channels: OFDM, UNII, HiperLAN2.
631 if (spec->supported_bands & SUPPORT_BAND_5GHZ) {
632 rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_channels =
633 spec->num_channels - 14;
634 rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_bitrates =
636 rt2x00dev->bands[IEEE80211_BAND_5GHZ].channels = &channels[14];
637 rt2x00dev->bands[IEEE80211_BAND_5GHZ].bitrates = &rates[4];
638 hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
639 &rt2x00dev->bands[IEEE80211_BAND_5GHZ];
640 memcpy(&rt2x00dev->bands[IEEE80211_BAND_5GHZ].ht_cap,
641 &spec->ht, sizeof(spec->ht));
648 ERROR(rt2x00dev, "Allocation ieee80211 modes failed.\n");
652 static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev)
654 if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags))
655 ieee80211_unregister_hw(rt2x00dev->hw);
657 if (likely(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ])) {
658 kfree(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
659 kfree(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->bitrates);
660 rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
661 rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
664 kfree(rt2x00dev->spec.channels_info);
667 static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
669 struct hw_mode_spec *spec = &rt2x00dev->spec;
672 if (test_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags))
676 * Initialize HW modes.
678 status = rt2x00lib_probe_hw_modes(rt2x00dev, spec);
683 * Initialize HW fields.
685 rt2x00dev->hw->queues = rt2x00dev->ops->tx_queues;
688 * Initialize extra TX headroom required.
690 rt2x00dev->hw->extra_tx_headroom =
691 max_t(unsigned int, IEEE80211_TX_STATUS_HEADROOM,
692 rt2x00dev->ops->extra_tx_headroom);
695 * Take TX headroom required for alignment into account.
697 if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags))
698 rt2x00dev->hw->extra_tx_headroom += RT2X00_L2PAD_SIZE;
699 else if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags))
700 rt2x00dev->hw->extra_tx_headroom += RT2X00_ALIGN_SIZE;
705 status = ieee80211_register_hw(rt2x00dev->hw);
709 set_bit(DEVICE_STATE_REGISTERED_HW, &rt2x00dev->flags);
715 * Initialization/uninitialization handlers.
717 static void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev)
719 if (!test_and_clear_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags))
723 * Unregister extra components.
725 rt2x00rfkill_unregister(rt2x00dev);
728 * Allow the HW to uninitialize.
730 rt2x00dev->ops->lib->uninitialize(rt2x00dev);
733 * Free allocated queue entries.
735 rt2x00queue_uninitialize(rt2x00dev);
738 static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev)
742 if (test_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags))
746 * Allocate all queue entries.
748 status = rt2x00queue_initialize(rt2x00dev);
753 * Initialize the device.
755 status = rt2x00dev->ops->lib->initialize(rt2x00dev);
757 rt2x00queue_uninitialize(rt2x00dev);
761 set_bit(DEVICE_STATE_INITIALIZED, &rt2x00dev->flags);
764 * Register the extra components.
766 rt2x00rfkill_register(rt2x00dev);
771 int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
775 if (test_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
779 * If this is the first interface which is added,
780 * we should load the firmware now.
782 retval = rt2x00lib_load_firmware(rt2x00dev);
787 * Initialize the device.
789 retval = rt2x00lib_initialize(rt2x00dev);
793 rt2x00dev->intf_ap_count = 0;
794 rt2x00dev->intf_sta_count = 0;
795 rt2x00dev->intf_associated = 0;
797 /* Enable the radio */
798 retval = rt2x00lib_enable_radio(rt2x00dev);
800 rt2x00queue_uninitialize(rt2x00dev);
804 set_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags);
809 void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev)
811 if (!test_and_clear_bit(DEVICE_STATE_STARTED, &rt2x00dev->flags))
815 * Perhaps we can add something smarter here,
816 * but for now just disabling the radio should do.
818 rt2x00lib_disable_radio(rt2x00dev);
820 rt2x00dev->intf_ap_count = 0;
821 rt2x00dev->intf_sta_count = 0;
822 rt2x00dev->intf_associated = 0;
826 * driver allocation handlers.
828 int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
830 int retval = -ENOMEM;
832 mutex_init(&rt2x00dev->csr_mutex);
834 set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
837 * Make room for rt2x00_intf inside the per-interface
838 * structure ieee80211_vif.
840 rt2x00dev->hw->vif_data_size = sizeof(struct rt2x00_intf);
843 * Determine which operating modes are supported, all modes
844 * which require beaconing, depend on the availability of
847 rt2x00dev->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
848 if (rt2x00dev->ops->bcn->entry_num > 0)
849 rt2x00dev->hw->wiphy->interface_modes |=
850 BIT(NL80211_IFTYPE_ADHOC) |
851 BIT(NL80211_IFTYPE_AP) |
852 BIT(NL80211_IFTYPE_MESH_POINT) |
853 BIT(NL80211_IFTYPE_WDS);
856 * Let the driver probe the device to detect the capabilities.
858 retval = rt2x00dev->ops->lib->probe_hw(rt2x00dev);
860 ERROR(rt2x00dev, "Failed to allocate device.\n");
865 * Initialize configuration work.
867 INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
870 * Allocate queue array.
872 retval = rt2x00queue_allocate(rt2x00dev);
877 * Initialize ieee80211 structure.
879 retval = rt2x00lib_probe_hw(rt2x00dev);
881 ERROR(rt2x00dev, "Failed to initialize hw.\n");
886 * Register extra components.
888 rt2x00link_register(rt2x00dev);
889 rt2x00leds_register(rt2x00dev);
890 rt2x00debug_register(rt2x00dev);
895 rt2x00lib_remove_dev(rt2x00dev);
899 EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev);
901 void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
903 clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
908 rt2x00lib_disable_radio(rt2x00dev);
913 cancel_work_sync(&rt2x00dev->intf_work);
916 * Uninitialize device.
918 rt2x00lib_uninitialize(rt2x00dev);
921 * Free extra components
923 rt2x00debug_deregister(rt2x00dev);
924 rt2x00leds_unregister(rt2x00dev);
927 * Free ieee80211_hw memory.
929 rt2x00lib_remove_hw(rt2x00dev);
932 * Free firmware image.
934 rt2x00lib_free_firmware(rt2x00dev);
937 * Free queue structures.
939 rt2x00queue_free(rt2x00dev);
941 EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev);
944 * Device state handlers
947 int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state)
949 NOTICE(rt2x00dev, "Going to sleep.\n");
952 * Prevent mac80211 from accessing driver while suspended.
954 if (!test_and_clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
958 * Cleanup as much as possible.
960 rt2x00lib_uninitialize(rt2x00dev);
963 * Suspend/disable extra components.
965 rt2x00leds_suspend(rt2x00dev);
966 rt2x00debug_deregister(rt2x00dev);
969 * Set device mode to sleep for power management,
970 * on some hardware this call seems to consistently fail.
971 * From the specifications it is hard to tell why it fails,
972 * and if this is a "bad thing".
973 * Overall it is safe to just ignore the failure and
974 * continue suspending. The only downside is that the
975 * device will not be in optimal power save mode, but with
976 * the radio and the other components already disabled the
977 * device is as good as disabled.
979 if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP))
980 WARNING(rt2x00dev, "Device failed to enter sleep state, "
981 "continue suspending.\n");
985 EXPORT_SYMBOL_GPL(rt2x00lib_suspend);
987 int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
989 NOTICE(rt2x00dev, "Waking up.\n");
992 * Restore/enable extra components.
994 rt2x00debug_register(rt2x00dev);
995 rt2x00leds_resume(rt2x00dev);
998 * We are ready again to receive requests from mac80211.
1000 set_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
1004 EXPORT_SYMBOL_GPL(rt2x00lib_resume);
1005 #endif /* CONFIG_PM */
1008 * rt2x00lib module information.
1010 MODULE_AUTHOR(DRV_PROJECT);
1011 MODULE_VERSION(DRV_VERSION);
1012 MODULE_DESCRIPTION("rt2x00 library");
1013 MODULE_LICENSE("GPL");