drivers/net/wireless/iwlwifi/iwl-3945.c

   1 /******************************************************************************
   2  *
   3  * Copyright(c) 2003 - 2010 Intel Corporation. All rights reserved.
   4  *
   5  * This program is free software; you can redistribute it and/or modify it
   6  * under the terms of version 2 of the GNU General Public License as
   7  * published by the Free Software Foundation.
   8  *
   9  * This program is distributed in the hope that it will be useful, but WITHOUT
  10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  12  * more details.
  13  *
  14  * You should have received a copy of the GNU General Public License along with
  15  * this program; if not, write to the Free Software Foundation, Inc.,
  16  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  17  *
  18  * The full GNU General Public License is included in this distribution in the
  19  * file called LICENSE.
  20  *
  21  * Contact Information:
  22  *  Intel Linux Wireless <ilw@linux.intel.com>
  23  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  24  *
  25  *****************************************************************************/
  26
  27 #include <linux/kernel.h>
  28 #include <linux/module.h>
  29 #include <linux/init.h>
  30 #include <linux/slab.h>
  31 #include <linux/pci.h>
  32 #include <linux/dma-mapping.h>
  33 #include <linux/delay.h>
  34 #include <linux/sched.h>
  35 #include <linux/skbuff.h>
  36 #include <linux/netdevice.h>
  37 #include <linux/wireless.h>
  38 #include <linux/firmware.h>
  39 #include <linux/etherdevice.h>
  40 #include <asm/unaligned.h>
  41 #include <net/mac80211.h>
  42
  43 #include "iwl-fh.h"
  44 #include "iwl-3945-fh.h"
  45 #include "iwl-commands.h"
  46 #include "iwl-sta.h"
  47 #include "iwl-3945.h"
  48 #include "iwl-eeprom.h"
  49 #include "iwl-core.h"
  50 #include "iwl-helpers.h"
  51 #include "iwl-led.h"
  52 #include "iwl-3945-led.h"
  53 #include "iwl-3945-debugfs.h"
  54
  55 #define IWL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np)    \
  56         [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP,   \
  57                                     IWL_RATE_##r##M_IEEE,   \
  58                                     IWL_RATE_##ip##M_INDEX, \
  59                                     IWL_RATE_##in##M_INDEX, \
  60                                     IWL_RATE_##rp##M_INDEX, \
  61                                     IWL_RATE_##rn##M_INDEX, \
  62                                     IWL_RATE_##pp##M_INDEX, \
  63                                     IWL_RATE_##np##M_INDEX, \
  64                                     IWL_RATE_##r##M_INDEX_TABLE, \
  65                                     IWL_RATE_##ip##M_INDEX_TABLE }
  66
  67 /*
  68  * Parameter order:
  69  *   rate, prev rate, next rate, prev tgg rate, next tgg rate
  70  *
  71  * If there isn't a valid next or previous rate then INV is used which
  72  * maps to IWL_RATE_INVALID
  73  *
  74  */
  75 const struct iwl3945_rate_info iwl3945_rates[IWL_RATE_COUNT_3945] = {
  76         IWL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2),    /*  1mbps */
  77         IWL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5),          /*  2mbps */
  78         IWL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11),        /*5.5mbps */
  79         IWL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18),      /* 11mbps */
  80         IWL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11),        /*  6mbps */
  81         IWL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11),       /*  9mbps */
  82         IWL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18),   /* 12mbps */
  83         IWL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24),   /* 18mbps */
  84         IWL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36),   /* 24mbps */
  85         IWL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48),   /* 36mbps */
  86         IWL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54),   /* 48mbps */
  87         IWL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV),/* 54mbps */
  88 };
  89
  90 /* 1 = enable the iwl3945_disable_events() function */
  91 #define IWL_EVT_DISABLE (0)
  92 #define IWL_EVT_DISABLE_SIZE (1532/32)
  93
  94 /**
  95  * iwl3945_disable_events - Disable selected events in uCode event log
  96  *
  97  * Disable an event by writing "1"s into "disable"
  98  *   bitmap in SRAM.  Bit position corresponds to Event # (id/type).
  99  *   Default values of 0 enable uCode events to be logged.
 100  * Use for only special debugging.  This function is just a placeholder as-is,
 101  *   you'll need to provide the special bits! ...
 102  *   ... and set IWL_EVT_DISABLE to 1. */
 103 void iwl3945_disable_events(struct iwl_priv *priv)
 104 {
 105         int i;
 106         u32 base;               /* SRAM address of event log header */
 107         u32 disable_ptr;        /* SRAM address of event-disable bitmap array */
 108         u32 array_size;         /* # of u32 entries in array */
 109         u32 evt_disable[IWL_EVT_DISABLE_SIZE] = {
 110                 0x00000000,     /*   31 -    0  Event id numbers */
 111                 0x00000000,     /*   63 -   32 */
 112                 0x00000000,     /*   95 -   64 */
 113                 0x00000000,     /*  127 -   96 */
 114                 0x00000000,     /*  159 -  128 */
 115                 0x00000000,     /*  191 -  160 */
 116                 0x00000000,     /*  223 -  192 */
 117                 0x00000000,     /*  255 -  224 */
 118                 0x00000000,     /*  287 -  256 */
 119                 0x00000000,     /*  319 -  288 */
 120                 0x00000000,     /*  351 -  320 */
 121                 0x00000000,     /*  383 -  352 */
 122                 0x00000000,     /*  415 -  384 */
 123                 0x00000000,     /*  447 -  416 */
 124                 0x00000000,     /*  479 -  448 */
 125                 0x00000000,     /*  511 -  480 */
 126                 0x00000000,     /*  543 -  512 */
 127                 0x00000000,     /*  575 -  544 */
 128                 0x00000000,     /*  607 -  576 */
 129                 0x00000000,     /*  639 -  608 */
 130                 0x00000000,     /*  671 -  640 */
 131                 0x00000000,     /*  703 -  672 */
 132                 0x00000000,     /*  735 -  704 */
 133                 0x00000000,     /*  767 -  736 */
 134                 0x00000000,     /*  799 -  768 */
 135                 0x00000000,     /*  831 -  800 */
 136                 0x00000000,     /*  863 -  832 */
 137                 0x00000000,     /*  895 -  864 */
 138                 0x00000000,     /*  927 -  896 */
 139                 0x00000000,     /*  959 -  928 */
 140                 0x00000000,     /*  991 -  960 */
 141                 0x00000000,     /* 1023 -  992 */
 142                 0x00000000,     /* 1055 - 1024 */
 143                 0x00000000,     /* 1087 - 1056 */
 144                 0x00000000,     /* 1119 - 1088 */
 145                 0x00000000,     /* 1151 - 1120 */
 146                 0x00000000,     /* 1183 - 1152 */
 147                 0x00000000,     /* 1215 - 1184 */
 148                 0x00000000,     /* 1247 - 1216 */
 149                 0x00000000,     /* 1279 - 1248 */
 150                 0x00000000,     /* 1311 - 1280 */
 151                 0x00000000,     /* 1343 - 1312 */
 152                 0x00000000,     /* 1375 - 1344 */
 153                 0x00000000,     /* 1407 - 1376 */
 154                 0x00000000,     /* 1439 - 1408 */
 155                 0x00000000,     /* 1471 - 1440 */
 156                 0x00000000,     /* 1503 - 1472 */
 157         };
 158
 159         base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
 160         if (!iwl3945_hw_valid_rtc_data_addr(base)) {
 161                 IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base);
 162                 return;
 163         }
 164
 165         disable_ptr = iwl_read_targ_mem(priv, base + (4 * sizeof(u32)));
 166         array_size = iwl_read_targ_mem(priv, base + (5 * sizeof(u32)));
 167
 168         if (IWL_EVT_DISABLE && (array_size == IWL_EVT_DISABLE_SIZE)) {
 169                 IWL_DEBUG_INFO(priv, "Disabling selected uCode log events at 0x%x\n",
 170                                disable_ptr);
 171                 for (i = 0; i < IWL_EVT_DISABLE_SIZE; i++)
 172                         iwl_write_targ_mem(priv,
 173                                            disable_ptr + (i * sizeof(u32)),
 174                                            evt_disable[i]);
 175
 176         } else {
 177                 IWL_DEBUG_INFO(priv, "Selected uCode log events may be disabled\n");
 178                 IWL_DEBUG_INFO(priv, "  by writing \"1\"s into disable bitmap\n");
 179                 IWL_DEBUG_INFO(priv, "  in SRAM at 0x%x, size %d u32s\n",
 180                                disable_ptr, array_size);
 181         }
 182
 183 }
 184
 185 static int iwl3945_hwrate_to_plcp_idx(u8 plcp)
 186 {
 187         int idx;
 188
 189         for (idx = 0; idx < IWL_RATE_COUNT_3945; idx++)
 190                 if (iwl3945_rates[idx].plcp == plcp)
 191                         return idx;
 192         return -1;
 193 }
 194
 195 #ifdef CONFIG_IWLWIFI_DEBUG
 196 #define TX_STATUS_ENTRY(x) case TX_3945_STATUS_FAIL_ ## x: return #x
 197
 198 static const char *iwl3945_get_tx_fail_reason(u32 status)
 199 {
 200         switch (status & TX_STATUS_MSK) {
 201         case TX_3945_STATUS_SUCCESS:
 202                 return "SUCCESS";
 203                 TX_STATUS_ENTRY(SHORT_LIMIT);
 204                 TX_STATUS_ENTRY(LONG_LIMIT);
 205                 TX_STATUS_ENTRY(FIFO_UNDERRUN);
 206                 TX_STATUS_ENTRY(MGMNT_ABORT);
 207                 TX_STATUS_ENTRY(NEXT_FRAG);
 208                 TX_STATUS_ENTRY(LIFE_EXPIRE);
 209                 TX_STATUS_ENTRY(DEST_PS);
 210                 TX_STATUS_ENTRY(ABORTED);
 211                 TX_STATUS_ENTRY(BT_RETRY);
 212                 TX_STATUS_ENTRY(STA_INVALID);
 213                 TX_STATUS_ENTRY(FRAG_DROPPED);
 214                 TX_STATUS_ENTRY(TID_DISABLE);
 215                 TX_STATUS_ENTRY(FRAME_FLUSHED);
 216                 TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL);
 217                 TX_STATUS_ENTRY(TX_LOCKED);
 218                 TX_STATUS_ENTRY(NO_BEACON_ON_RADAR);
 219         }
 220
 221         return "UNKNOWN";
 222 }
 223 #else
 224 static inline const char *iwl3945_get_tx_fail_reason(u32 status)
 225 {
 226         return "";
 227 }
 228 #endif
 229
 230 /*
 231  * get ieee prev rate from rate scale table.
 232  * for A and B mode we need to overright prev
 233  * value
 234  */
 235 int iwl3945_rs_next_rate(struct iwl_priv *priv, int rate)
 236 {
 237         int next_rate = iwl3945_get_prev_ieee_rate(rate);
 238
 239         switch (priv->band) {
 240         case IEEE80211_BAND_5GHZ:
 241                 if (rate == IWL_RATE_12M_INDEX)
 242                         next_rate = IWL_RATE_9M_INDEX;
 243                 else if (rate == IWL_RATE_6M_INDEX)
 244                         next_rate = IWL_RATE_6M_INDEX;
 245                 break;
 246         case IEEE80211_BAND_2GHZ:
 247                 if (!(priv->_3945.sta_supp_rates & IWL_OFDM_RATES_MASK) &&
 248                     iwl_is_associated(priv)) {
 249                         if (rate == IWL_RATE_11M_INDEX)
 250                                 next_rate = IWL_RATE_5M_INDEX;
 251                 }
 252                 break;
 253
 254         default:
 255                 break;
 256         }
 257
 258         return next_rate;
 259 }
 260
 261
 262 /**
 263  * iwl3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd
 264  *
 265  * When FW advances 'R' index, all entries between old and new 'R' index
 266  * need to be reclaimed. As result, some free space forms. If there is
 267  * enough free space (> low mark), wake the stack that feeds us.
 268  */
 269 static void iwl3945_tx_queue_reclaim(struct iwl_priv *priv,
 270                                      int txq_id, int index)
 271 {
 272         struct iwl_tx_queue *txq = &priv->txq[txq_id];
 273         struct iwl_queue *q = &txq->q;
 274         struct iwl_tx_info *tx_info;
 275
 276         BUG_ON(txq_id == IWL_CMD_QUEUE_NUM);
 277
 278         for (index = iwl_queue_inc_wrap(index, q->n_bd); q->read_ptr != index;
 279                 q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd)) {
 280
 281                 tx_info = &txq->txb[txq->q.read_ptr];
 282                 ieee80211_tx_status_irqsafe(priv->hw, tx_info->skb);
 283                 tx_info->skb = NULL;
 284                 priv->cfg->ops->lib->txq_free_tfd(priv, txq);
 285         }
 286
 287         if (iwl_queue_space(q) > q->low_mark && (txq_id >= 0) &&
 288                         (txq_id != IWL_CMD_QUEUE_NUM) &&
 289                         priv->mac80211_registered)
 290                 iwl_wake_queue(priv, txq_id);
 291 }
 292
 293 /**
 294  * iwl3945_rx_reply_tx - Handle Tx response
 295  */
 296 static void iwl3945_rx_reply_tx(struct iwl_priv *priv,
 297                                 struct iwl_rx_mem_buffer *rxb)
 298 {
 299         struct iwl_rx_packet *pkt = rxb_addr(rxb);
 300         u16 sequence = le16_to_cpu(pkt->hdr.sequence);
 301         int txq_id = SEQ_TO_QUEUE(sequence);
 302         int index = SEQ_TO_INDEX(sequence);
 303         struct iwl_tx_queue *txq = &priv->txq[txq_id];
 304         struct ieee80211_tx_info *info;
 305         struct iwl3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
 306         u32  status = le32_to_cpu(tx_resp->status);
 307         int rate_idx;
 308         int fail;
 309
 310         if ((index >= txq->q.n_bd) || (iwl_queue_used(&txq->q, index) == 0)) {
 311                 IWL_ERR(priv, "Read index for DMA queue txq_id (%d) index %d "
 312                           "is out of range [0-%d] %d %d\n", txq_id,
 313                           index, txq->q.n_bd, txq->q.write_ptr,
 314                           txq->q.read_ptr);
 315                 return;
 316         }
 317
 318         info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb);
 319         ieee80211_tx_info_clear_status(info);
 320
 321         /* Fill the MRR chain with some info about on-chip retransmissions */
 322         rate_idx = iwl3945_hwrate_to_plcp_idx(tx_resp->rate);
 323         if (info->band == IEEE80211_BAND_5GHZ)
 324                 rate_idx -= IWL_FIRST_OFDM_RATE;
 325
 326         fail = tx_resp->failure_frame;
 327
 328         info->status.rates[0].idx = rate_idx;
 329         info->status.rates[0].count = fail + 1; /* add final attempt */
 330
 331         /* tx_status->rts_retry_count = tx_resp->failure_rts; */
 332         info->flags |= ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ?
 333                                 IEEE80211_TX_STAT_ACK : 0;
 334
 335         IWL_DEBUG_TX(priv, "Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n",
 336                         txq_id, iwl3945_get_tx_fail_reason(status), status,
 337                         tx_resp->rate, tx_resp->failure_frame);
 338
 339         IWL_DEBUG_TX_REPLY(priv, "Tx queue reclaim %d\n", index);
 340         iwl3945_tx_queue_reclaim(priv, txq_id, index);
 341
 342         if (iwl_check_bits(status, TX_ABORT_REQUIRED_MSK))
 343                 IWL_ERR(priv, "TODO:  Implement Tx ABORT REQUIRED!!!\n");
 344 }
 345
 346
 347
 348 /*****************************************************************************
 349  *
 350  * Intel PRO/Wireless 3945ABG/BG Network Connection
 351  *
 352  *  RX handler implementations
 353  *
 354  *****************************************************************************/
 355 #ifdef CONFIG_IWLWIFI_DEBUGFS
 356 /*
 357  *  based on the assumption of all statistics counter are in DWORD
 358  *  FIXME: This function is for debugging, do not deal with
 359  *  the case of counters roll-over.
 360  */
 361 static void iwl3945_accumulative_statistics(struct iwl_priv *priv,
 362                                             __le32 *stats)
 363 {
 364         int i;
 365         __le32 *prev_stats;
 366         u32 *accum_stats;
 367         u32 *delta, *max_delta;
 368
 369         prev_stats = (__le32 *)&priv->_3945.statistics;
 370         accum_stats = (u32 *)&priv->_3945.accum_statistics;
 371         delta = (u32 *)&priv->_3945.delta_statistics;
 372         max_delta = (u32 *)&priv->_3945.max_delta;
 373
 374         for (i = sizeof(__le32); i < sizeof(struct iwl3945_notif_statistics);
 375              i += sizeof(__le32), stats++, prev_stats++, delta++,
 376              max_delta++, accum_stats++) {
 377                 if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) {
 378                         *delta = (le32_to_cpu(*stats) -
 379                                 le32_to_cpu(*prev_stats));
 380                         *accum_stats += *delta;
 381                         if (*delta > *max_delta)
 382                                 *max_delta = *delta;
 383                 }
 384         }
 385
 386         /* reset accumulative statistics for "no-counter" type statistics */
 387         priv->_3945.accum_statistics.general.temperature =
 388                 priv->_3945.statistics.general.temperature;
 389         priv->_3945.accum_statistics.general.ttl_timestamp =
 390                 priv->_3945.statistics.general.ttl_timestamp;
 391 }
 392 #endif
 393
 394 /**
 395  * iwl3945_good_plcp_health - checks for plcp error.
 396  *
 397  * When the plcp error is exceeding the thresholds, reset the radio
 398  * to improve the throughput.
 399  */
 400 static bool iwl3945_good_plcp_health(struct iwl_priv *priv,
 401                                 struct iwl_rx_packet *pkt)
 402 {
 403         bool rc = true;
 404         struct iwl3945_notif_statistics current_stat;
 405         int combined_plcp_delta;
 406         unsigned int plcp_msec;
 407         unsigned long plcp_received_jiffies;
 408
 409         if (priv->cfg->plcp_delta_threshold ==
 410             IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE) {
 411                 IWL_DEBUG_RADIO(priv, "plcp_err check disabled\n");
 412                 return rc;
 413         }
 414         memcpy(&current_stat, pkt->u.raw, sizeof(struct
 415                         iwl3945_notif_statistics));
 416         /*
 417          * check for plcp_err and trigger radio reset if it exceeds
 418          * the plcp error threshold plcp_delta.
 419          */
 420         plcp_received_jiffies = jiffies;
 421         plcp_msec = jiffies_to_msecs((long) plcp_received_jiffies -
 422                                         (long) priv->plcp_jiffies);
 423         priv->plcp_jiffies = plcp_received_jiffies;
 424         /*
 425          * check to make sure plcp_msec is not 0 to prevent division
 426          * by zero.
 427          */
 428         if (plcp_msec) {
 429                 combined_plcp_delta =
 430                         (le32_to_cpu(current_stat.rx.ofdm.plcp_err) -
 431                         le32_to_cpu(priv->_3945.statistics.rx.ofdm.plcp_err));
 432
 433                 if ((combined_plcp_delta > 0) &&
 434                         ((combined_plcp_delta * 100) / plcp_msec) >
 435                         priv->cfg->plcp_delta_threshold) {
 436                         /*
 437                          * if plcp_err exceed the threshold, the following
 438                          * data is printed in csv format:
 439                          *    Text: plcp_err exceeded %d,
 440                          *    Received ofdm.plcp_err,
 441                          *    Current ofdm.plcp_err,
 442                          *    combined_plcp_delta,
 443                          *    plcp_msec
 444                          */
 445                         IWL_DEBUG_RADIO(priv, "plcp_err exceeded %u, "
 446                                 "%u, %d, %u mSecs\n",
 447                                 priv->cfg->plcp_delta_threshold,
 448                                 le32_to_cpu(current_stat.rx.ofdm.plcp_err),
 449                                 combined_plcp_delta, plcp_msec);
 450                         /*
 451                          * Reset the RF radio due to the high plcp
 452                          * error rate
 453                          */
 454                         rc = false;
 455                 }
 456         }
 457         return rc;
 458 }
 459
 460 void iwl3945_hw_rx_statistics(struct iwl_priv *priv,
 461                 struct iwl_rx_mem_buffer *rxb)
 462 {
 463         struct iwl_rx_packet *pkt = rxb_addr(rxb);
 464
 465         IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n",
 466                      (int)sizeof(struct iwl3945_notif_statistics),
 467                      le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
 468 #ifdef CONFIG_IWLWIFI_DEBUGFS
 469         iwl3945_accumulative_statistics(priv, (__le32 *)&pkt->u.raw);
 470 #endif
 471         iwl_recover_from_statistics(priv, pkt);
 472
 473         memcpy(&priv->_3945.statistics, pkt->u.raw, sizeof(priv->_3945.statistics));
 474 }
 475
 476 void iwl3945_reply_statistics(struct iwl_priv *priv,
 477                               struct iwl_rx_mem_buffer *rxb)
 478 {
 479         struct iwl_rx_packet *pkt = rxb_addr(rxb);
 480         __le32 *flag = (__le32 *)&pkt->u.raw;
 481
 482         if (le32_to_cpu(*flag) & UCODE_STATISTICS_CLEAR_MSK) {
 483 #ifdef CONFIG_IWLWIFI_DEBUGFS
 484                 memset(&priv->_3945.accum_statistics, 0,
 485                         sizeof(struct iwl3945_notif_statistics));
 486                 memset(&priv->_3945.delta_statistics, 0,
 487                         sizeof(struct iwl3945_notif_statistics));
 488                 memset(&priv->_3945.max_delta, 0,
 489                         sizeof(struct iwl3945_notif_statistics));
 490 #endif
 491                 IWL_DEBUG_RX(priv, "Statistics have been cleared\n");
 492         }
 493         iwl3945_hw_rx_statistics(priv, rxb);
 494 }
 495
 496
 497 /******************************************************************************
 498  *
 499  * Misc. internal state and helper functions
 500  *
 501  ******************************************************************************/
 502
 503 /* This is necessary only for a number of statistics, see the caller. */
 504 static int iwl3945_is_network_packet(struct iwl_priv *priv,
 505                 struct ieee80211_hdr *header)
 506 {
 507         /* Filter incoming packets to determine if they are targeted toward
 508          * this network, discarding packets coming from ourselves */
 509         switch (priv->iw_mode) {
 510         case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source    | BSSID */
 511                 /* packets to our IBSS update information */
 512                 return !compare_ether_addr(header->addr3, priv->bssid);
 513         case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */
 514                 /* packets to our IBSS update information */
 515                 return !compare_ether_addr(header->addr2, priv->bssid);
 516         default:
 517                 return 1;
 518         }
 519 }
 520
 521 static void iwl3945_pass_packet_to_mac80211(struct iwl_priv *priv,
 522                                    struct iwl_rx_mem_buffer *rxb,
 523                                    struct ieee80211_rx_status *stats)
 524 {
 525         struct iwl_rx_packet *pkt = rxb_addr(rxb);
 526         struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
 527         struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
 528         struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
 529         u16 len = le16_to_cpu(rx_hdr->len);
 530         struct sk_buff *skb;
 531         __le16 fc = hdr->frame_control;
 532
 533         /* We received data from the HW, so stop the watchdog */
 534         if (unlikely(len + IWL39_RX_FRAME_SIZE >
 535                      PAGE_SIZE << priv->hw_params.rx_page_order)) {
 536                 IWL_DEBUG_DROP(priv, "Corruption detected!\n");
 537                 return;
 538         }
 539
 540         /* We only process data packets if the interface is open */
 541         if (unlikely(!priv->is_open)) {
 542                 IWL_DEBUG_DROP_LIMIT(priv,
 543                         "Dropping packet while interface is not open.\n");
 544                 return;
 545         }
 546
 547         skb = dev_alloc_skb(128);
 548         if (!skb) {
 549                 IWL_ERR(priv, "dev_alloc_skb failed\n");
 550                 return;
 551         }
 552
 553         if (!iwl3945_mod_params.sw_crypto)
 554                 iwl_set_decrypted_flag(priv,
 555                                        (struct ieee80211_hdr *)rxb_addr(rxb),
 556                                        le32_to_cpu(rx_end->status), stats);
 557
 558         skb_add_rx_frag(skb, 0, rxb->page,
 559                         (void *)rx_hdr->payload - (void *)pkt, len);
 560
 561         iwl_update_stats(priv, false, fc, len);
 562         memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
 563
 564         ieee80211_rx(priv->hw, skb);
 565         priv->alloc_rxb_page--;
 566         rxb->page = NULL;
 567 }
 568
 569 #define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
 570
 571 static void iwl3945_rx_reply_rx(struct iwl_priv *priv,
 572                                 struct iwl_rx_mem_buffer *rxb)
 573 {
 574         struct ieee80211_hdr *header;
 575         struct ieee80211_rx_status rx_status;
 576         struct iwl_rx_packet *pkt = rxb_addr(rxb);
 577         struct iwl3945_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt);
 578         struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
 579         struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
 580         u16 rx_stats_sig_avg __maybe_unused = le16_to_cpu(rx_stats->sig_avg);
 581         u16 rx_stats_noise_diff __maybe_unused = le16_to_cpu(rx_stats->noise_diff);
 582         u8 network_packet;
 583
 584         rx_status.flag = 0;
 585         rx_status.mactime = le64_to_cpu(rx_end->timestamp);
 586         rx_status.freq =
 587                 ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr->channel));
 588         rx_status.band = (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
 589                                 IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
 590
 591         rx_status.rate_idx = iwl3945_hwrate_to_plcp_idx(rx_hdr->rate);
 592         if (rx_status.band == IEEE80211_BAND_5GHZ)
 593                 rx_status.rate_idx -= IWL_FIRST_OFDM_RATE;
 594
 595         rx_status.antenna = (le16_to_cpu(rx_hdr->phy_flags) &
 596                                         RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4;
 597
 598         /* set the preamble flag if appropriate */
 599         if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
 600                 rx_status.flag |= RX_FLAG_SHORTPRE;
 601
 602         if ((unlikely(rx_stats->phy_count > 20))) {
 603                 IWL_DEBUG_DROP(priv, "dsp size out of range [0,20]: %d/n",
 604                                 rx_stats->phy_count);
 605                 return;
 606         }
 607
 608         if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR)
 609             || !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
 610                 IWL_DEBUG_RX(priv, "Bad CRC or FIFO: 0x%08X.\n", rx_end->status);
 611                 return;
 612         }
 613
 614
 615
 616         /* Convert 3945's rssi indicator to dBm */
 617         rx_status.signal = rx_stats->rssi - IWL39_RSSI_OFFSET;
 618
 619         IWL_DEBUG_STATS(priv, "Rssi %d sig_avg %d noise_diff %d\n",
 620                         rx_status.signal, rx_stats_sig_avg,
 621                         rx_stats_noise_diff);
 622
 623         header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
 624
 625         network_packet = iwl3945_is_network_packet(priv, header);
 626
 627         IWL_DEBUG_STATS_LIMIT(priv, "[%c] %d RSSI:%d Signal:%u, Rate:%u\n",
 628                               network_packet ? '*' : ' ',
 629                               le16_to_cpu(rx_hdr->channel),
 630                               rx_status.signal, rx_status.signal,
 631                               rx_status.rate_idx);
 632
 633         iwl_dbg_log_rx_data_frame(priv, le16_to_cpu(rx_hdr->len), header);
 634
 635         if (network_packet) {
 636                 priv->_3945.last_beacon_time =
 637                         le32_to_cpu(rx_end->beacon_timestamp);
 638                 priv->_3945.last_tsf = le64_to_cpu(rx_end->timestamp);
 639                 priv->_3945.last_rx_rssi = rx_status.signal;
 640         }
 641
 642         iwl3945_pass_packet_to_mac80211(priv, rxb, &rx_status);
 643 }
 644
 645 int iwl3945_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv,
 646                                      struct iwl_tx_queue *txq,
 647                                      dma_addr_t addr, u16 len, u8 reset, u8 pad)
 648 {
 649         int count;
 650         struct iwl_queue *q;
 651         struct iwl3945_tfd *tfd, *tfd_tmp;
 652
 653         q = &txq->q;
 654         tfd_tmp = (struct iwl3945_tfd *)txq->tfds;
 655         tfd = &tfd_tmp[q->write_ptr];
 656
 657         if (reset)
 658                 memset(tfd, 0, sizeof(*tfd));
 659
 660         count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
 661
 662         if ((count >= NUM_TFD_CHUNKS) || (count < 0)) {
 663                 IWL_ERR(priv, "Error can not send more than %d chunks\n",
 664                           NUM_TFD_CHUNKS);
 665                 return -EINVAL;
 666         }
 667
 668         tfd->tbs[count].addr = cpu_to_le32(addr);
 669         tfd->tbs[count].len = cpu_to_le32(len);
 670
 671         count++;
 672
 673         tfd->control_flags = cpu_to_le32(TFD_CTL_COUNT_SET(count) |
 674                                          TFD_CTL_PAD_SET(pad));
 675
 676         return 0;
 677 }
 678
 679 /**
 680  * iwl3945_hw_txq_free_tfd - Free one TFD, those at index [txq->q.read_ptr]
 681  *
 682  * Does NOT advance any indexes
 683  */
 684 void iwl3945_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq)
 685 {
 686         struct iwl3945_tfd *tfd_tmp = (struct iwl3945_tfd *)txq->tfds;
 687         int index = txq->q.read_ptr;
 688         struct iwl3945_tfd *tfd = &tfd_tmp[index];
 689         struct pci_dev *dev = priv->pci_dev;
 690         int i;
 691         int counter;
 692
 693         /* sanity check */
 694         counter = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
 695         if (counter > NUM_TFD_CHUNKS) {
 696                 IWL_ERR(priv, "Too many chunks: %i\n", counter);
 697                 /* @todo issue fatal error, it is quite serious situation */
 698                 return;
 699         }
 700
 701         /* Unmap tx_cmd */
 702         if (counter)
 703                 pci_unmap_single(dev,
 704                                 dma_unmap_addr(&txq->meta[index], mapping),
 705                                 dma_unmap_len(&txq->meta[index], len),
 706                                 PCI_DMA_TODEVICE);
 707
 708         /* unmap chunks if any */
 709
 710         for (i = 1; i < counter; i++)
 711                 pci_unmap_single(dev, le32_to_cpu(tfd->tbs[i].addr),
 712                          le32_to_cpu(tfd->tbs[i].len), PCI_DMA_TODEVICE);
 713
 714         /* free SKB */
 715         if (txq->txb) {
 716                 struct sk_buff *skb;
 717
 718                 skb = txq->txb[txq->q.read_ptr].skb;
 719
 720                 /* can be called from irqs-disabled context */
 721                 if (skb) {
 722                         dev_kfree_skb_any(skb);
 723                         txq->txb[txq->q.read_ptr].skb = NULL;
 724                 }
 725         }
 726 }
 727
 728 /**
 729  * iwl3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD:
 730  *
 731 */
 732 void iwl3945_hw_build_tx_cmd_rate(struct iwl_priv *priv,
 733                                   struct iwl_device_cmd *cmd,
 734                                   struct ieee80211_tx_info *info,
 735                                   struct ieee80211_hdr *hdr,
 736                                   int sta_id, int tx_id)
 737 {
 738         u16 hw_value = ieee80211_get_tx_rate(priv->hw, info)->hw_value;
 739         u16 rate_index = min(hw_value & 0xffff, IWL_RATE_COUNT_3945);
 740         u16 rate_mask;
 741         int rate;
 742         u8 rts_retry_limit;
 743         u8 data_retry_limit;
 744         __le32 tx_flags;
 745         __le16 fc = hdr->frame_control;
 746         struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
 747
 748         rate = iwl3945_rates[rate_index].plcp;
 749         tx_flags = tx_cmd->tx_flags;
 750
 751         /* We need to figure out how to get the sta->supp_rates while
 752          * in this running context */
 753         rate_mask = IWL_RATES_MASK;
 754
 755
 756         /* Set retry limit on DATA packets and Probe Responses*/
 757         if (ieee80211_is_probe_resp(fc))
 758                 data_retry_limit = 3;
 759         else
 760                 data_retry_limit = IWL_DEFAULT_TX_RETRY;
 761         tx_cmd->data_retry_limit = data_retry_limit;
 762
 763         if (tx_id >= IWL_CMD_QUEUE_NUM)
 764                 rts_retry_limit = 3;
 765         else
 766                 rts_retry_limit = 7;
 767
 768         if (data_retry_limit < rts_retry_limit)
 769                 rts_retry_limit = data_retry_limit;
 770         tx_cmd->rts_retry_limit = rts_retry_limit;
 771
 772         tx_cmd->rate = rate;
 773         tx_cmd->tx_flags = tx_flags;
 774
 775         /* OFDM */
 776         tx_cmd->supp_rates[0] =
 777            ((rate_mask & IWL_OFDM_RATES_MASK) >> IWL_FIRST_OFDM_RATE) & 0xFF;
 778
 779         /* CCK */
 780         tx_cmd->supp_rates[1] = (rate_mask & 0xF);
 781
 782         IWL_DEBUG_RATE(priv, "Tx sta id: %d, rate: %d (plcp), flags: 0x%4X "
 783                        "cck/ofdm mask: 0x%x/0x%x\n", sta_id,
 784                        tx_cmd->rate, le32_to_cpu(tx_cmd->tx_flags),
 785                        tx_cmd->supp_rates[1], tx_cmd->supp_rates[0]);
 786 }
 787
 788 static u8 iwl3945_sync_sta(struct iwl_priv *priv, int sta_id, u16 tx_rate)
 789 {
 790         unsigned long flags_spin;
 791         struct iwl_station_entry *station;
 792
 793         if (sta_id == IWL_INVALID_STATION)
 794                 return IWL_INVALID_STATION;
 795
 796         spin_lock_irqsave(&priv->sta_lock, flags_spin);
 797         station = &priv->stations[sta_id];
 798
 799         station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK;
 800         station->sta.rate_n_flags = cpu_to_le16(tx_rate);
 801         station->sta.mode = STA_CONTROL_MODIFY_MSK;
 802         iwl_send_add_sta(priv, &station->sta, CMD_ASYNC);
 803         spin_unlock_irqrestore(&priv->sta_lock, flags_spin);
 804
 805         IWL_DEBUG_RATE(priv, "SCALE sync station %d to rate %d\n",
 806                         sta_id, tx_rate);
 807         return sta_id;
 808 }
 809
 810 static int iwl3945_set_pwr_src(struct iwl_priv *priv, enum iwl_pwr_src src)
 811 {
 812         if (src == IWL_PWR_SRC_VAUX) {
 813                 if (pci_pme_capable(priv->pci_dev, PCI_D3cold)) {
 814                         iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
 815                                         APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
 816                                         ~APMG_PS_CTRL_MSK_PWR_SRC);
 817
 818                         iwl_poll_bit(priv, CSR_GPIO_IN,
 819                                      CSR_GPIO_IN_VAL_VAUX_PWR_SRC,
 820                                      CSR_GPIO_IN_BIT_AUX_POWER, 5000);
 821                 }
 822         } else {
 823                 iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG,
 824                                 APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
 825                                 ~APMG_PS_CTRL_MSK_PWR_SRC);
 826
 827                 iwl_poll_bit(priv, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC,
 828                              CSR_GPIO_IN_BIT_AUX_POWER, 5000);  /* uS */
 829         }
 830
 831         return 0;
 832 }
 833
 834 static int iwl3945_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
 835 {
 836         iwl_write_direct32(priv, FH39_RCSR_RBD_BASE(0), rxq->bd_dma);
 837         iwl_write_direct32(priv, FH39_RCSR_RPTR_ADDR(0), rxq->rb_stts_dma);
 838         iwl_write_direct32(priv, FH39_RCSR_WPTR(0), 0);
 839         iwl_write_direct32(priv, FH39_RCSR_CONFIG(0),
 840                 FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE |
 841                 FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE |
 842                 FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN |
 843                 FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 |
 844                 (RX_QUEUE_SIZE_LOG << FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE) |
 845                 FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST |
 846                 (1 << FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH) |
 847                 FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH);
 848
 849         /* fake read to flush all prev I/O */
 850         iwl_read_direct32(priv, FH39_RSSR_CTRL);
 851
 852         return 0;
 853 }
 854
 855 static int iwl3945_tx_reset(struct iwl_priv *priv)
 856 {
 857
 858         /* bypass mode */
 859         iwl_write_prph(priv, ALM_SCD_MODE_REG, 0x2);
 860
 861         /* RA 0 is active */
 862         iwl_write_prph(priv, ALM_SCD_ARASTAT_REG, 0x01);
 863
 864         /* all 6 fifo are active */
 865         iwl_write_prph(priv, ALM_SCD_TXFACT_REG, 0x3f);
 866
 867         iwl_write_prph(priv, ALM_SCD_SBYP_MODE_1_REG, 0x010000);
 868         iwl_write_prph(priv, ALM_SCD_SBYP_MODE_2_REG, 0x030002);
 869         iwl_write_prph(priv, ALM_SCD_TXF4MF_REG, 0x000004);
 870         iwl_write_prph(priv, ALM_SCD_TXF5MF_REG, 0x000005);
 871
 872         iwl_write_direct32(priv, FH39_TSSR_CBB_BASE,
 873                              priv->_3945.shared_phys);
 874
 875         iwl_write_direct32(priv, FH39_TSSR_MSG_CONFIG,
 876                 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON |
 877                 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON |
 878                 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B |
 879                 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON |
 880                 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON |
 881                 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH |
 882                 FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH);
 883
 884
 885         return 0;
 886 }
 887
 888 /**
 889  * iwl3945_txq_ctx_reset - Reset TX queue context
 890  *
 891  * Destroys all DMA structures and initialize them again
 892  */
 893 static int iwl3945_txq_ctx_reset(struct iwl_priv *priv)
 894 {
 895         int rc;
 896         int txq_id, slots_num;
 897
 898         iwl3945_hw_txq_ctx_free(priv);
 899
 900         /* allocate tx queue structure */
 901         rc = iwl_alloc_txq_mem(priv);
 902         if (rc)
 903                 return rc;
 904
 905         /* Tx CMD queue */
 906         rc = iwl3945_tx_reset(priv);
 907         if (rc)
 908                 goto error;
 909
 910         /* Tx queue(s) */
 911         for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) {
 912                 slots_num = (txq_id == IWL_CMD_QUEUE_NUM) ?
 913                                 TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS;
 914                 rc = iwl_tx_queue_init(priv, &priv->txq[txq_id], slots_num,
 915                                        txq_id);
 916                 if (rc) {
 917                         IWL_ERR(priv, "Tx %d queue init failed\n", txq_id);
 918                         goto error;
 919                 }
 920         }
 921
 922         return rc;
 923
 924  error:
 925         iwl3945_hw_txq_ctx_free(priv);
 926         return rc;
 927 }
 928
 929
 930 /*
 931  * Start up 3945's basic functionality after it has been reset
 932  * (e.g. after platform boot, or shutdown via iwl_apm_stop())
 933  * NOTE:  This does not load uCode nor start the embedded processor
 934  */
 935 static int iwl3945_apm_init(struct iwl_priv *priv)
 936 {
 937         int ret = iwl_apm_init(priv);
 938
 939         /* Clear APMG (NIC's internal power management) interrupts */
 940         iwl_write_prph(priv, APMG_RTC_INT_MSK_REG, 0x0);
 941         iwl_write_prph(priv, APMG_RTC_INT_STT_REG, 0xFFFFFFFF);
 942
 943         /* Reset radio chip */
 944         iwl_set_bits_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ);
 945         udelay(5);
 946         iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ);
 947
 948         return ret;
 949 }
 950
 951 static void iwl3945_nic_config(struct iwl_priv *priv)
 952 {
 953         struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
 954         unsigned long flags;
 955         u8 rev_id = 0;
 956
 957         spin_lock_irqsave(&priv->lock, flags);
 958
 959         /* Determine HW type */
 960         pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &rev_id);
 961
 962         IWL_DEBUG_INFO(priv, "HW Revision ID = 0x%X\n", rev_id);
 963
 964         if (rev_id & PCI_CFG_REV_ID_BIT_RTP)
 965                 IWL_DEBUG_INFO(priv, "RTP type\n");
 966         else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) {
 967                 IWL_DEBUG_INFO(priv, "3945 RADIO-MB type\n");
 968                 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 969                             CSR39_HW_IF_CONFIG_REG_BIT_3945_MB);
 970         } else {
 971                 IWL_DEBUG_INFO(priv, "3945 RADIO-MM type\n");
 972                 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 973                             CSR39_HW_IF_CONFIG_REG_BIT_3945_MM);
 974         }
 975
 976         if (EEPROM_SKU_CAP_OP_MODE_MRC == eeprom->sku_cap) {
 977                 IWL_DEBUG_INFO(priv, "SKU OP mode is mrc\n");
 978                 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 979                             CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC);
 980         } else
 981                 IWL_DEBUG_INFO(priv, "SKU OP mode is basic\n");
 982
 983         if ((eeprom->board_revision & 0xF0) == 0xD0) {
 984                 IWL_DEBUG_INFO(priv, "3945ABG revision is 0x%X\n",
 985                                eeprom->board_revision);
 986                 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 987                             CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
 988         } else {
 989                 IWL_DEBUG_INFO(priv, "3945ABG revision is 0x%X\n",
 990                                eeprom->board_revision);
 991                 iwl_clear_bit(priv, CSR_HW_IF_CONFIG_REG,
 992                               CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
 993         }
 994
 995         if (eeprom->almgor_m_version <= 1) {
 996                 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 997                             CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A);
 998                 IWL_DEBUG_INFO(priv, "Card M type A version is 0x%X\n",
 999                                eeprom->almgor_m_version);
1000         } else {
1001                 IWL_DEBUG_INFO(priv, "Card M type B version is 0x%X\n",
1002                                eeprom->almgor_m_version);
1003                 iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
1004                             CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B);
1005         }
1006         spin_unlock_irqrestore(&priv->lock, flags);
1007
1008         if (eeprom->sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE)
1009                 IWL_DEBUG_RF_KILL(priv, "SW RF KILL supported in EEPROM.\n");
1010
1011         if (eeprom->sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE)
1012                 IWL_DEBUG_RF_KILL(priv, "HW RF KILL supported in EEPROM.\n");
1013 }
1014
1015 int iwl3945_hw_nic_init(struct iwl_priv *priv)
1016 {
1017         int rc;
1018         unsigned long flags;
1019         struct iwl_rx_queue *rxq = &priv->rxq;
1020
1021         spin_lock_irqsave(&priv->lock, flags);
1022         priv->cfg->ops->lib->apm_ops.init(priv);
1023         spin_unlock_irqrestore(&priv->lock, flags);
1024
1025         rc = priv->cfg->ops->lib->apm_ops.set_pwr_src(priv, IWL_PWR_SRC_VMAIN);
1026         if (rc)
1027                 return rc;
1028
1029         priv->cfg->ops->lib->apm_ops.config(priv);
1030
1031         /* Allocate the RX queue, or reset if it is already allocated */
1032         if (!rxq->bd) {
1033                 rc = iwl_rx_queue_alloc(priv);
1034                 if (rc) {
1035                         IWL_ERR(priv, "Unable to initialize Rx queue\n");
1036                         return -ENOMEM;
1037                 }
1038         } else
1039                 iwl3945_rx_queue_reset(priv, rxq);
1040
1041         iwl3945_rx_replenish(priv);
1042
1043         iwl3945_rx_init(priv, rxq);
1044
1045
1046         /* Look at using this instead:
1047         rxq->need_update = 1;
1048         iwl_rx_queue_update_write_ptr(priv, rxq);
1049         */
1050
1051         iwl_write_direct32(priv, FH39_RCSR_WPTR(0), rxq->write & ~7);
1052
1053         rc = iwl3945_txq_ctx_reset(priv);
1054         if (rc)
1055                 return rc;
1056
1057         set_bit(STATUS_INIT, &priv->status);
1058
1059         return 0;
1060 }
1061
1062 /**
1063  * iwl3945_hw_txq_ctx_free - Free TXQ Context
1064  *
1065  * Destroy all TX DMA queues and structures
1066  */
1067 void iwl3945_hw_txq_ctx_free(struct iwl_priv *priv)
1068 {
1069         int txq_id;
1070
1071         /* Tx queues */
1072         if (priv->txq)
1073                 for (txq_id = 0; txq_id < priv->hw_params.max_txq_num;
1074                      txq_id++)
1075                         if (txq_id == IWL_CMD_QUEUE_NUM)
1076                                 iwl_cmd_queue_free(priv);
1077                         else
1078                                 iwl_tx_queue_free(priv, txq_id);
1079
1080         /* free tx queue structure */
1081         iwl_free_txq_mem(priv);
1082 }
1083
1084 void iwl3945_hw_txq_ctx_stop(struct iwl_priv *priv)
1085 {
1086         int txq_id;
1087
1088         /* stop SCD */
1089         iwl_write_prph(priv, ALM_SCD_MODE_REG, 0);
1090         iwl_write_prph(priv, ALM_SCD_TXFACT_REG, 0);
1091
1092         /* reset TFD queues */
1093         for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) {
1094                 iwl_write_direct32(priv, FH39_TCSR_CONFIG(txq_id), 0x0);
1095                 iwl_poll_direct_bit(priv, FH39_TSSR_TX_STATUS,
1096                                 FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id),
1097                                 1000);
1098         }
1099
1100         iwl3945_hw_txq_ctx_free(priv);
1101 }
1102
1103 /**
1104  * iwl3945_hw_reg_adjust_power_by_temp
1105  * return index delta into power gain settings table
1106 */
1107 static int iwl3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading)
1108 {
1109         return (new_reading - old_reading) * (-11) / 100;
1110 }
1111
1112 /**
1113  * iwl3945_hw_reg_temp_out_of_range - Keep temperature in sane range
1114  */
1115 static inline int iwl3945_hw_reg_temp_out_of_range(int temperature)
1116 {
1117         return ((temperature < -260) || (temperature > 25)) ? 1 : 0;
1118 }
1119
1120 int iwl3945_hw_get_temperature(struct iwl_priv *priv)
1121 {
1122         return iwl_read32(priv, CSR_UCODE_DRV_GP2);
1123 }
1124
1125 /**
1126  * iwl3945_hw_reg_txpower_get_temperature
1127  * get the current temperature by reading from NIC
1128 */
1129 static int iwl3945_hw_reg_txpower_get_temperature(struct iwl_priv *priv)
1130 {
1131         struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
1132         int temperature;
1133
1134         temperature = iwl3945_hw_get_temperature(priv);
1135
1136         /* driver's okay range is -260 to +25.
1137          *   human readable okay range is 0 to +285 */
1138         IWL_DEBUG_INFO(priv, "Temperature: %d\n", temperature + IWL_TEMP_CONVERT);
1139
1140         /* handle insane temp reading */
1141         if (iwl3945_hw_reg_temp_out_of_range(temperature)) {
1142                 IWL_ERR(priv, "Error bad temperature value  %d\n", temperature);
1143
1144                 /* if really really hot(?),
1145                  *   substitute the 3rd band/group's temp measured at factory */
1146                 if (priv->last_temperature > 100)
1147                         temperature = eeprom->groups[2].temperature;
1148                 else /* else use most recent "sane" value from driver */
1149                         temperature = priv->last_temperature;
1150         }
1151
1152         return temperature;     /* raw, not "human readable" */
1153 }
1154
1155 /* Adjust Txpower only if temperature variance is greater than threshold.
1156  *
1157  * Both are lower than older versions' 9 degrees */
1158 #define IWL_TEMPERATURE_LIMIT_TIMER   6
1159
1160 /**
1161  * is_temp_calib_needed - determines if new calibration is needed
1162  *
1163  * records new temperature in tx_mgr->temperature.
1164  * replaces tx_mgr->last_temperature *only* if calib needed
1165  *    (assumes caller will actually do the calibration!). */
1166 static int is_temp_calib_needed(struct iwl_priv *priv)
1167 {
1168         int temp_diff;
1169
1170         priv->temperature = iwl3945_hw_reg_txpower_get_temperature(priv);
1171         temp_diff = priv->temperature - priv->last_temperature;
1172
1173         /* get absolute value */
1174         if (temp_diff < 0) {
1175                 IWL_DEBUG_POWER(priv, "Getting cooler, delta %d,\n", temp_diff);
1176                 temp_diff = -temp_diff;
1177         } else if (temp_diff == 0)
1178                 IWL_DEBUG_POWER(priv, "Same temp,\n");
1179         else
1180                 IWL_DEBUG_POWER(priv, "Getting warmer, delta %d,\n", temp_diff);
1181
1182         /* if we don't need calibration, *don't* update last_temperature */
1183         if (temp_diff < IWL_TEMPERATURE_LIMIT_TIMER) {
1184                 IWL_DEBUG_POWER(priv, "Timed thermal calib not needed\n");
1185                 return 0;
1186         }
1187
1188         IWL_DEBUG_POWER(priv, "Timed thermal calib needed\n");
1189
1190         /* assume that caller will actually do calib ...
1191          *   update the "last temperature" value */
1192         priv->last_temperature = priv->temperature;
1193         return 1;
1194 }
1195
1196 #define IWL_MAX_GAIN_ENTRIES 78
1197 #define IWL_CCK_FROM_OFDM_POWER_DIFF  -5
1198 #define IWL_CCK_FROM_OFDM_INDEX_DIFF (10)
1199
1200 /* radio and DSP power table, each step is 1/2 dB.
1201  * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */
1202 static struct iwl3945_tx_power power_gain_table[2][IWL_MAX_GAIN_ENTRIES] = {
1203         {
1204          {251, 127},            /* 2.4 GHz, highest power */
1205          {251, 127},
1206          {251, 127},
1207          {251, 127},
1208          {251, 125},
1209          {251, 110},
1210          {251, 105},
1211          {251, 98},
1212          {187, 125},
1213          {187, 115},
1214          {187, 108},
1215          {187, 99},
1216          {243, 119},
1217          {243, 111},
1218          {243, 105},
1219          {243, 97},
1220          {243, 92},
1221          {211, 106},
1222          {211, 100},
1223          {179, 120},
1224          {179, 113},
1225          {179, 107},
1226          {147, 125},
1227          {147, 119},
1228          {147, 112},
1229          {147, 106},
1230          {147, 101},
1231          {147, 97},
1232          {147, 91},
1233          {115, 107},
1234          {235, 121},
1235          {235, 115},
1236          {235, 109},
1237          {203, 127},
1238          {203, 121},
1239          {203, 115},
1240          {203, 108},
1241          {203, 102},
1242          {203, 96},
1243          {203, 92},
1244          {171, 110},
1245          {171, 104},
1246          {171, 98},
1247          {139, 116},
1248          {227, 125},
1249          {227, 119},
1250          {227, 113},
1251          {227, 107},
1252          {227, 101},
1253          {227, 96},
1254          {195, 113},
1255          {195, 106},
1256          {195, 102},
1257          {195, 95},
1258          {163, 113},
1259          {163, 106},
1260          {163, 102},
1261          {163, 95},
1262          {131, 113},
1263          {131, 106},
1264          {131, 102},
1265          {131, 95},
1266          {99, 113},
1267          {99, 106},
1268          {99, 102},
1269          {99, 95},
1270          {67, 113},
1271          {67, 106},
1272          {67, 102},
1273          {67, 95},
1274          {35, 113},
1275          {35, 106},
1276          {35, 102},
1277          {35, 95},
1278          {3, 113},
1279          {3, 106},
1280          {3, 102},
1281          {3, 95} },             /* 2.4 GHz, lowest power */
1282         {
1283          {251, 127},            /* 5.x GHz, highest power */
1284          {251, 120},
1285          {251, 114},
1286          {219, 119},
1287          {219, 101},
1288          {187, 113},
1289          {187, 102},
1290          {155, 114},
1291          {155, 103},
1292          {123, 117},
1293          {123, 107},
1294          {123, 99},
1295          {123, 92},
1296          {91, 108},
1297          {59, 125},
1298          {59, 118},
1299          {59, 109},
1300          {59, 102},
1301          {59, 96},
1302          {59, 90},
1303          {27, 104},
1304          {27, 98},
1305          {27, 92},
1306          {115, 118},
1307          {115, 111},
1308          {115, 104},
1309          {83, 126},
1310          {83, 121},
1311          {83, 113},
1312          {83, 105},
1313          {83, 99},
1314          {51, 118},
1315          {51, 111},
1316          {51, 104},
1317          {51, 98},
1318          {19, 116},
1319          {19, 109},
1320          {19, 102},
1321          {19, 98},
1322          {19, 93},
1323          {171, 113},
1324          {171, 107},
1325          {171, 99},
1326          {139, 120},
1327          {139, 113},
1328          {139, 107},
1329          {139, 99},
1330          {107, 120},
1331          {107, 113},
1332          {107, 107},
1333          {107, 99},
1334          {75, 120},
1335          {75, 113},
1336          {75, 107},
1337          {75, 99},
1338          {43, 120},
1339          {43, 113},
1340          {43, 107},
1341          {43, 99},
1342          {11, 120},
1343          {11, 113},
1344          {11, 107},
1345          {11, 99},
1346          {131, 107},
1347          {131, 99},
1348          {99, 120},
1349          {99, 113},
1350          {99, 107},
1351          {99, 99},
1352          {67, 120},
1353          {67, 113},
1354          {67, 107},
1355          {67, 99},
1356          {35, 120},
1357          {35, 113},
1358          {35, 107},
1359          {35, 99},
1360          {3, 120} }             /* 5.x GHz, lowest power */
1361 };
1362
1363 static inline u8 iwl3945_hw_reg_fix_power_index(int index)
1364 {
1365         if (index < 0)
1366                 return 0;
1367         if (index >= IWL_MAX_GAIN_ENTRIES)
1368                 return IWL_MAX_GAIN_ENTRIES - 1;
1369         return (u8) index;
1370 }
1371
1372 /* Kick off thermal recalibration check every 60 seconds */
1373 #define REG_RECALIB_PERIOD (60)
1374
1375 /**
1376  * iwl3945_hw_reg_set_scan_power - Set Tx power for scan probe requests
1377  *
1378  * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK)
1379  * or 6 Mbit (OFDM) rates.
1380  */
1381 static void iwl3945_hw_reg_set_scan_power(struct iwl_priv *priv, u32 scan_tbl_index,
1382                                s32 rate_index, const s8 *clip_pwrs,
1383                                struct iwl_channel_info *ch_info,
1384                                int band_index)
1385 {
1386         struct iwl3945_scan_power_info *scan_power_info;
1387         s8 power;
1388         u8 power_index;
1389
1390         scan_power_info = &ch_info->scan_pwr_info[scan_tbl_index];
1391
1392         /* use this channel group's 6Mbit clipping/saturation pwr,
1393          *   but cap at regulatory scan power restriction (set during init
1394          *   based on eeprom channel data) for this channel.  */
1395         power = min(ch_info->scan_power, clip_pwrs[IWL_RATE_6M_INDEX_TABLE]);
1396
1397         /* further limit to user's max power preference.
1398          * FIXME:  Other spectrum management power limitations do not
1399          *   seem to apply?? */
1400         power = min(power, priv->tx_power_user_lmt);
1401         scan_power_info->requested_power = power;
1402
1403         /* find difference between new scan *power* and current "normal"
1404          *   Tx *power* for 6Mb.  Use this difference (x2) to adjust the
1405          *   current "normal" temperature-compensated Tx power *index* for
1406          *   this rate (1Mb or 6Mb) to yield new temp-compensated scan power
1407          *   *index*. */
1408         power_index = ch_info->power_info[rate_index].power_table_index
1409             - (power - ch_info->power_info
1410                [IWL_RATE_6M_INDEX_TABLE].requested_power) * 2;
1411
1412         /* store reference index that we use when adjusting *all* scan
1413          *   powers.  So we can accommodate user (all channel) or spectrum
1414          *   management (single channel) power changes "between" temperature
1415          *   feedback compensation procedures.
1416          * don't force fit this reference index into gain table; it may be a
1417          *   negative number.  This will help avoid errors when we're at
1418          *   the lower bounds (highest gains, for warmest temperatures)
1419          *   of the table. */
1420
1421         /* don't exceed table bounds for "real" setting */
1422         power_index = iwl3945_hw_reg_fix_power_index(power_index);
1423
1424         scan_power_info->power_table_index = power_index;
1425         scan_power_info->tpc.tx_gain =
1426             power_gain_table[band_index][power_index].tx_gain;
1427         scan_power_info->tpc.dsp_atten =
1428             power_gain_table[band_index][power_index].dsp_atten;
1429 }
1430
1431 /**
1432  * iwl3945_send_tx_power - fill in Tx Power command with gain settings
1433  *
1434  * Configures power settings for all rates for the current channel,
1435  * using values from channel info struct, and send to NIC
1436  */
1437 static int iwl3945_send_tx_power(struct iwl_priv *priv)
1438 {
1439         int rate_idx, i;
1440         const struct iwl_channel_info *ch_info = NULL;
1441         struct iwl3945_txpowertable_cmd txpower = {
1442                 .channel = priv->active_rxon.channel,
1443         };
1444
1445         txpower.band = (priv->band == IEEE80211_BAND_5GHZ) ? 0 : 1;
1446         ch_info = iwl_get_channel_info(priv,
1447                                        priv->band,
1448                                        le16_to_cpu(priv->active_rxon.channel));
1449         if (!ch_info) {
1450                 IWL_ERR(priv,
1451                         "Failed to get channel info for channel %d [%d]\n",
1452                         le16_to_cpu(priv->active_rxon.channel), priv->band);
1453                 return -EINVAL;
1454         }
1455
1456         if (!is_channel_valid(ch_info)) {
1457                 IWL_DEBUG_POWER(priv, "Not calling TX_PWR_TABLE_CMD on "
1458                                 "non-Tx channel.\n");
1459                 return 0;
1460         }
1461
1462         /* fill cmd with power settings for all rates for current channel */
1463         /* Fill OFDM rate */
1464         for (rate_idx = IWL_FIRST_OFDM_RATE, i = 0;
1465              rate_idx <= IWL39_LAST_OFDM_RATE; rate_idx++, i++) {
1466
1467                 txpower.power[i].tpc = ch_info->power_info[i].tpc;
1468                 txpower.power[i].rate = iwl3945_rates[rate_idx].plcp;
1469
1470                 IWL_DEBUG_POWER(priv, "ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
1471                                 le16_to_cpu(txpower.channel),
1472                                 txpower.band,
1473                                 txpower.power[i].tpc.tx_gain,
1474                                 txpower.power[i].tpc.dsp_atten,
1475                                 txpower.power[i].rate);
1476         }
1477         /* Fill CCK rates */
1478         for (rate_idx = IWL_FIRST_CCK_RATE;
1479              rate_idx <= IWL_LAST_CCK_RATE; rate_idx++, i++) {
1480                 txpower.power[i].tpc = ch_info->power_info[i].tpc;
1481                 txpower.power[i].rate = iwl3945_rates[rate_idx].plcp;
1482
1483                 IWL_DEBUG_POWER(priv, "ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
1484                                 le16_to_cpu(txpower.channel),
1485                                 txpower.band,
1486                                 txpower.power[i].tpc.tx_gain,
1487                                 txpower.power[i].tpc.dsp_atten,
1488                                 txpower.power[i].rate);
1489         }
1490
1491         return iwl_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD,
1492                                 sizeof(struct iwl3945_txpowertable_cmd),
1493                                 &txpower);
1494
1495 }
1496
1497 /**
1498  * iwl3945_hw_reg_set_new_power - Configures power tables at new levels
1499  * @ch_info: Channel to update.  Uses power_info.requested_power.
1500  *
1501  * Replace requested_power and base_power_index ch_info fields for
1502  * one channel.
1503  *
1504  * Called if user or spectrum management changes power preferences.
1505  * Takes into account h/w and modulation limitations (clip power).
1506  *
1507  * This does *not* send anything to NIC, just sets up ch_info for one channel.
1508  *
1509  * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to
1510  *       properly fill out the scan powers, and actual h/w gain settings,
1511  *       and send changes to NIC
1512  */
1513 static int iwl3945_hw_reg_set_new_power(struct iwl_priv *priv,
1514                              struct iwl_channel_info *ch_info)
1515 {
1516         struct iwl3945_channel_power_info *power_info;
1517         int power_changed = 0;
1518         int i;
1519         const s8 *clip_pwrs;
1520         int power;
1521
1522         /* Get this chnlgrp's rate-to-max/clip-powers table */
1523         clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers;
1524
1525         /* Get this channel's rate-to-current-power settings table */
1526         power_info = ch_info->power_info;
1527
1528         /* update OFDM Txpower settings */
1529         for (i = IWL_RATE_6M_INDEX_TABLE; i <= IWL_RATE_54M_INDEX_TABLE;
1530              i++, ++power_info) {
1531                 int delta_idx;
1532
1533                 /* limit new power to be no more than h/w capability */
1534                 power = min(ch_info->curr_txpow, clip_pwrs[i]);
1535                 if (power == power_info->requested_power)
1536                         continue;
1537
1538                 /* find difference between old and new requested powers,
1539                  *    update base (non-temp-compensated) power index */
1540                 delta_idx = (power - power_info->requested_power) * 2;
1541                 power_info->base_power_index -= delta_idx;
1542
1543                 /* save new requested power value */
1544                 power_info->requested_power = power;
1545
1546                 power_changed = 1;
1547         }
1548
1549         /* update CCK Txpower settings, based on OFDM 12M setting ...
1550          *    ... all CCK power settings for a given channel are the *same*. */
1551         if (power_changed) {
1552                 power =
1553                     ch_info->power_info[IWL_RATE_12M_INDEX_TABLE].
1554                     requested_power + IWL_CCK_FROM_OFDM_POWER_DIFF;
1555
1556                 /* do all CCK rates' iwl3945_channel_power_info structures */
1557                 for (i = IWL_RATE_1M_INDEX_TABLE; i <= IWL_RATE_11M_INDEX_TABLE; i++) {
1558                         power_info->requested_power = power;
1559                         power_info->base_power_index =
1560                             ch_info->power_info[IWL_RATE_12M_INDEX_TABLE].
1561                             base_power_index + IWL_CCK_FROM_OFDM_INDEX_DIFF;
1562                         ++power_info;
1563                 }
1564         }
1565
1566         return 0;
1567 }
1568
1569 /**
1570  * iwl3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel
1571  *
1572  * NOTE: Returned power limit may be less (but not more) than requested,
1573  *       based strictly on regulatory (eeprom and spectrum mgt) limitations
1574  *       (no consideration for h/w clipping limitations).
1575  */
1576 static int iwl3945_hw_reg_get_ch_txpower_limit(struct iwl_channel_info *ch_info)
1577 {
1578         s8 max_power;
1579
1580 #if 0
1581         /* if we're using TGd limits, use lower of TGd or EEPROM */
1582         if (ch_info->tgd_data.max_power != 0)
1583                 max_power = min(ch_info->tgd_data.max_power,
1584                                 ch_info->eeprom.max_power_avg);
1585
1586         /* else just use EEPROM limits */
1587         else
1588 #endif
1589                 max_power = ch_info->eeprom.max_power_avg;
1590
1591         return min(max_power, ch_info->max_power_avg);
1592 }
1593
1594 /**
1595  * iwl3945_hw_reg_comp_txpower_temp - Compensate for temperature
1596  *
1597  * Compensate txpower settings of *all* channels for temperature.
1598  * This only accounts for the difference between current temperature
1599  *   and the factory calibration temperatures, and bases the new settings
1600  *   on the channel's base_power_index.
1601  *
1602  * If RxOn is "associated", this sends the new Txpower to NIC!
1603  */
1604 static int iwl3945_hw_reg_comp_txpower_temp(struct iwl_priv *priv)
1605 {
1606         struct iwl_channel_info *ch_info = NULL;
1607         struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
1608         int delta_index;
1609         const s8 *clip_pwrs; /* array of h/w max power levels for each rate */
1610         u8 a_band;
1611         u8 rate_index;
1612         u8 scan_tbl_index;
1613         u8 i;
1614         int ref_temp;
1615         int temperature = priv->temperature;
1616
1617         if (priv->disable_tx_power_cal ||
1618             test_bit(STATUS_SCANNING, &priv->status)) {
1619                 /* do not perform tx power calibration */
1620                 return 0;
1621         }
1622         /* set up new Tx power info for each and every channel, 2.4 and 5.x */
1623         for (i = 0; i < priv->channel_count; i++) {
1624                 ch_info = &priv->channel_info[i];
1625                 a_band = is_channel_a_band(ch_info);
1626
1627                 /* Get this chnlgrp's factory calibration temperature */
1628                 ref_temp = (s16)eeprom->groups[ch_info->group_index].
1629                     temperature;
1630
1631                 /* get power index adjustment based on current and factory
1632                  * temps */
1633                 delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature,
1634                                                               ref_temp);
1635
1636                 /* set tx power value for all rates, OFDM and CCK */
1637                 for (rate_index = 0; rate_index < IWL_RATE_COUNT;
1638                      rate_index++) {
1639                         int power_idx =
1640                             ch_info->power_info[rate_index].base_power_index;
1641
1642                         /* temperature compensate */
1643                         power_idx += delta_index;
1644
1645                         /* stay within table range */
1646                         power_idx = iwl3945_hw_reg_fix_power_index(power_idx);
1647                         ch_info->power_info[rate_index].
1648                             power_table_index = (u8) power_idx;
1649                         ch_info->power_info[rate_index].tpc =
1650                             power_gain_table[a_band][power_idx];
1651                 }
1652
1653                 /* Get this chnlgrp's rate-to-max/clip-powers table */
1654                 clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers;
1655
1656                 /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
1657                 for (scan_tbl_index = 0;
1658                      scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) {
1659                         s32 actual_index = (scan_tbl_index == 0) ?
1660                             IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE;
1661                         iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index,
1662                                            actual_index, clip_pwrs,
1663                                            ch_info, a_band);
1664                 }
1665         }
1666
1667         /* send Txpower command for current channel to ucode */
1668         return priv->cfg->ops->lib->send_tx_power(priv);
1669 }
1670
1671 int iwl3945_hw_reg_set_txpower(struct iwl_priv *priv, s8 power)
1672 {
1673         struct iwl_channel_info *ch_info;
1674         s8 max_power;
1675         u8 a_band;
1676         u8 i;
1677
1678         if (priv->tx_power_user_lmt == power) {
1679                 IWL_DEBUG_POWER(priv, "Requested Tx power same as current "
1680                                 "limit: %ddBm.\n", power);
1681                 return 0;
1682         }
1683
1684         IWL_DEBUG_POWER(priv, "Setting upper limit clamp to %ddBm.\n", power);
1685         priv->tx_power_user_lmt = power;
1686
1687         /* set up new Tx powers for each and every channel, 2.4 and 5.x */
1688
1689         for (i = 0; i < priv->channel_count; i++) {
1690                 ch_info = &priv->channel_info[i];
1691                 a_band = is_channel_a_band(ch_info);
1692
1693                 /* find minimum power of all user and regulatory constraints
1694                  *    (does not consider h/w clipping limitations) */
1695                 max_power = iwl3945_hw_reg_get_ch_txpower_limit(ch_info);
1696                 max_power = min(power, max_power);
1697                 if (max_power != ch_info->curr_txpow) {
1698                         ch_info->curr_txpow = max_power;
1699
1700                         /* this considers the h/w clipping limitations */
1701                         iwl3945_hw_reg_set_new_power(priv, ch_info);
1702                 }
1703         }
1704
1705         /* update txpower settings for all channels,
1706          *   send to NIC if associated. */
1707         is_temp_calib_needed(priv);
1708         iwl3945_hw_reg_comp_txpower_temp(priv);
1709
1710         return 0;
1711 }
1712
1713 static int iwl3945_send_rxon_assoc(struct iwl_priv *priv)
1714 {
1715         int rc = 0;
1716         struct iwl_rx_packet *pkt;
1717         struct iwl3945_rxon_assoc_cmd rxon_assoc;
1718         struct iwl_host_cmd cmd = {
1719                 .id = REPLY_RXON_ASSOC,
1720                 .len = sizeof(rxon_assoc),
1721                 .flags = CMD_WANT_SKB,
1722                 .data = &rxon_assoc,
1723         };
1724         const struct iwl_rxon_cmd *rxon1 = &priv->staging_rxon;
1725         const struct iwl_rxon_cmd *rxon2 = &priv->active_rxon;
1726
1727         if ((rxon1->flags == rxon2->flags) &&
1728             (rxon1->filter_flags == rxon2->filter_flags) &&
1729             (rxon1->cck_basic_rates == rxon2->cck_basic_rates) &&
1730             (rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates)) {
1731                 IWL_DEBUG_INFO(priv, "Using current RXON_ASSOC.  Not resending.\n");
1732                 return 0;
1733         }
1734
1735         rxon_assoc.flags = priv->staging_rxon.flags;
1736         rxon_assoc.filter_flags = priv->staging_rxon.filter_flags;
1737         rxon_assoc.ofdm_basic_rates = priv->staging_rxon.ofdm_basic_rates;
1738         rxon_assoc.cck_basic_rates = priv->staging_rxon.cck_basic_rates;
1739         rxon_assoc.reserved = 0;
1740
1741         rc = iwl_send_cmd_sync(priv, &cmd);
1742         if (rc)
1743                 return rc;
1744
1745         pkt = (struct iwl_rx_packet *)cmd.reply_page;
1746         if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
1747                 IWL_ERR(priv, "Bad return from REPLY_RXON_ASSOC command\n");
1748                 rc = -EIO;
1749         }
1750
1751         iwl_free_pages(priv, cmd.reply_page);
1752
1753         return rc;
1754 }
1755
1756 /**
1757  * iwl3945_commit_rxon - commit staging_rxon to hardware
1758  *
1759  * The RXON command in staging_rxon is committed to the hardware and
1760  * the active_rxon structure is updated with the new data.  This
1761  * function correctly transitions out of the RXON_ASSOC_MSK state if
1762  * a HW tune is required based on the RXON structure changes.
1763  */
1764 static int iwl3945_commit_rxon(struct iwl_priv *priv)
1765 {
1766         /* cast away the const for active_rxon in this function */
1767         struct iwl3945_rxon_cmd *active_rxon = (void *)&priv->active_rxon;
1768         struct iwl3945_rxon_cmd *staging_rxon = (void *)&priv->staging_rxon;
1769         int rc = 0;
1770         bool new_assoc =
1771                 !!(priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK);
1772
1773         if (!iwl_is_alive(priv))
1774                 return -1;
1775
1776         /* always get timestamp with Rx frame */
1777         staging_rxon->flags |= RXON_FLG_TSF2HOST_MSK;
1778
1779         /* select antenna */
1780         staging_rxon->flags &=
1781             ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK);
1782         staging_rxon->flags |= iwl3945_get_antenna_flags(priv);
1783
1784         rc = iwl_check_rxon_cmd(priv);
1785         if (rc) {
1786                 IWL_ERR(priv, "Invalid RXON configuration.  Not committing.\n");
1787                 return -EINVAL;
1788         }
1789
1790         /* If we don't need to send a full RXON, we can use
1791          * iwl3945_rxon_assoc_cmd which is used to reconfigure filter
1792          * and other flags for the current radio configuration. */
1793         if (!iwl_full_rxon_required(priv)) {
1794                 rc = iwl_send_rxon_assoc(priv);
1795                 if (rc) {
1796                         IWL_ERR(priv, "Error setting RXON_ASSOC "
1797                                   "configuration (%d).\n", rc);
1798                         return rc;
1799                 }
1800
1801                 memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
1802
1803                 return 0;
1804         }
1805
1806         /* If we are currently associated and the new config requires
1807          * an RXON_ASSOC and the new config wants the associated mask enabled,
1808          * we must clear the associated from the active configuration
1809          * before we apply the new config */
1810         if (iwl_is_associated(priv) && new_assoc) {
1811                 IWL_DEBUG_INFO(priv, "Toggling associated bit on current RXON\n");
1812                 active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
1813
1814                 /*
1815                  * reserved4 and 5 could have been filled by the iwlcore code.
1816                  * Let's clear them before pushing to the 3945.
1817                  */
1818                 active_rxon->reserved4 = 0;
1819                 active_rxon->reserved5 = 0;
1820                 rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
1821                                       sizeof(struct iwl3945_rxon_cmd),
1822                                       &priv->active_rxon);
1823
1824                 /* If the mask clearing failed then we set
1825                  * active_rxon back to what it was previously */
1826                 if (rc) {
1827                         active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
1828                         IWL_ERR(priv, "Error clearing ASSOC_MSK on current "
1829                                   "configuration (%d).\n", rc);
1830                         return rc;
1831                 }
1832                 iwl_clear_ucode_stations(priv);
1833                 iwl_restore_stations(priv);
1834         }
1835
1836         IWL_DEBUG_INFO(priv, "Sending RXON\n"
1837                        "* with%s RXON_FILTER_ASSOC_MSK\n"
1838                        "* channel = %d\n"
1839                        "* bssid = %pM\n",
1840                        (new_assoc ? "" : "out"),
1841                        le16_to_cpu(staging_rxon->channel),
1842                        staging_rxon->bssid_addr);
1843
1844         /*
1845          * reserved4 and 5 could have been filled by the iwlcore code.
1846          * Let's clear them before pushing to the 3945.
1847          */
1848         staging_rxon->reserved4 = 0;
1849         staging_rxon->reserved5 = 0;
1850
1851         iwl_set_rxon_hwcrypto(priv, !iwl3945_mod_params.sw_crypto);
1852
1853         /* Apply the new configuration */
1854         rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
1855                               sizeof(struct iwl3945_rxon_cmd),
1856                               staging_rxon);
1857         if (rc) {
1858                 IWL_ERR(priv, "Error setting new configuration (%d).\n", rc);
1859                 return rc;
1860         }
1861
1862         memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
1863
1864         if (!new_assoc) {
1865                 iwl_clear_ucode_stations(priv);
1866                 iwl_restore_stations(priv);
1867         }
1868
1869         /* If we issue a new RXON command which required a tune then we must
1870          * send a new TXPOWER command or we won't be able to Tx any frames */
1871         rc = priv->cfg->ops->lib->send_tx_power(priv);
1872         if (rc) {
1873                 IWL_ERR(priv, "Error setting Tx power (%d).\n", rc);
1874                 return rc;
1875         }
1876
1877         /* Init the hardware's rate fallback order based on the band */
1878         rc = iwl3945_init_hw_rate_table(priv);
1879         if (rc) {
1880                 IWL_ERR(priv, "Error setting HW rate table: %02X\n", rc);
1881                 return -EIO;
1882         }
1883
1884         return 0;
1885 }
1886
1887 /**
1888  * iwl3945_reg_txpower_periodic -  called when time to check our temperature.
1889  *
1890  * -- reset periodic timer
1891  * -- see if temp has changed enough to warrant re-calibration ... if so:
1892  *     -- correct coeffs for temp (can reset temp timer)
1893  *     -- save this temp as "last",
1894  *     -- send new set of gain settings to NIC
1895  * NOTE:  This should continue working, even when we're not associated,
1896  *   so we can keep our internal table of scan powers current. */
1897 void iwl3945_reg_txpower_periodic(struct iwl_priv *priv)
1898 {
1899         /* This will kick in the "brute force"
1900          * iwl3945_hw_reg_comp_txpower_temp() below */
1901         if (!is_temp_calib_needed(priv))
1902                 goto reschedule;
1903
1904         /* Set up a new set of temp-adjusted TxPowers, send to NIC.
1905          * This is based *only* on current temperature,
1906          * ignoring any previous power measurements */
1907         iwl3945_hw_reg_comp_txpower_temp(priv);
1908
1909  reschedule:
1910         queue_delayed_work(priv->workqueue,
1911                            &priv->_3945.thermal_periodic, REG_RECALIB_PERIOD * HZ);
1912 }
1913
1914 static void iwl3945_bg_reg_txpower_periodic(struct work_struct *work)
1915 {
1916         struct iwl_priv *priv = container_of(work, struct iwl_priv,
1917                                              _3945.thermal_periodic.work);
1918
1919         if (test_bit(STATUS_EXIT_PENDING, &priv->status))
1920                 return;
1921
1922         mutex_lock(&priv->mutex);
1923         iwl3945_reg_txpower_periodic(priv);
1924         mutex_unlock(&priv->mutex);
1925 }
1926
1927 /**
1928  * iwl3945_hw_reg_get_ch_grp_index - find the channel-group index (0-4)
1929  *                                 for the channel.
1930  *
1931  * This function is used when initializing channel-info structs.
1932  *
1933  * NOTE: These channel groups do *NOT* match the bands above!
1934  *       These channel groups are based on factory-tested channels;
1935  *       on A-band, EEPROM's "group frequency" entries represent the top
1936  *       channel in each group 1-4.  Group 5 All B/G channels are in group 0.
1937  */
1938 static u16 iwl3945_hw_reg_get_ch_grp_index(struct iwl_priv *priv,
1939                                        const struct iwl_channel_info *ch_info)
1940 {
1941         struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
1942         struct iwl3945_eeprom_txpower_group *ch_grp = &eeprom->groups[0];
1943         u8 group;
1944         u16 group_index = 0;    /* based on factory calib frequencies */
1945         u8 grp_channel;
1946
1947         /* Find the group index for the channel ... don't use index 1(?) */
1948         if (is_channel_a_band(ch_info)) {
1949                 for (group = 1; group < 5; group++) {
1950                         grp_channel = ch_grp[group].group_channel;
1951                         if (ch_info->channel <= grp_channel) {
1952                                 group_index = group;
1953                                 break;
1954                         }
1955                 }
1956                 /* group 4 has a few channels *above* its factory cal freq */
1957                 if (group == 5)
1958                         group_index = 4;
1959         } else
1960                 group_index = 0;        /* 2.4 GHz, group 0 */
1961
1962         IWL_DEBUG_POWER(priv, "Chnl %d mapped to grp %d\n", ch_info->channel,
1963                         group_index);
1964         return group_index;
1965 }
1966
1967 /**
1968  * iwl3945_hw_reg_get_matched_power_index - Interpolate to get nominal index
1969  *
1970  * Interpolate to get nominal (i.e. at factory calibration temperature) index
1971  *   into radio/DSP gain settings table for requested power.
1972  */
1973 static int iwl3945_hw_reg_get_matched_power_index(struct iwl_priv *priv,
1974                                        s8 requested_power,
1975                                        s32 setting_index, s32 *new_index)
1976 {
1977         const struct iwl3945_eeprom_txpower_group *chnl_grp = NULL;
1978         struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
1979         s32 index0, index1;
1980         s32 power = 2 * requested_power;
1981         s32 i;
1982         const struct iwl3945_eeprom_txpower_sample *samples;
1983         s32 gains0, gains1;
1984         s32 res;
1985         s32 denominator;
1986
1987         chnl_grp = &eeprom->groups[setting_index];
1988         samples = chnl_grp->samples;
1989         for (i = 0; i < 5; i++) {
1990                 if (power == samples[i].power) {
1991                         *new_index = samples[i].gain_index;
1992                         return 0;
1993                 }
1994         }
1995
1996         if (power > samples[1].power) {
1997                 index0 = 0;
1998                 index1 = 1;
1999         } else if (power > samples[2].power) {
2000                 index0 = 1;
2001                 index1 = 2;
2002         } else if (power > samples[3].power) {
2003                 index0 = 2;
2004                 index1 = 3;
2005         } else {
2006                 index0 = 3;
2007                 index1 = 4;
2008         }
2009
2010         denominator = (s32) samples[index1].power - (s32) samples[index0].power;
2011         if (denominator == 0)
2012                 return -EINVAL;
2013         gains0 = (s32) samples[index0].gain_index * (1 << 19);
2014         gains1 = (s32) samples[index1].gain_index * (1 << 19);
2015         res = gains0 + (gains1 - gains0) *
2016             ((s32) power - (s32) samples[index0].power) / denominator +
2017             (1 << 18);
2018         *new_index = res >> 19;
2019         return 0;
2020 }
2021
2022 static void iwl3945_hw_reg_init_channel_groups(struct iwl_priv *priv)
2023 {
2024         u32 i;
2025         s32 rate_index;
2026         struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
2027         const struct iwl3945_eeprom_txpower_group *group;
2028
2029         IWL_DEBUG_POWER(priv, "Initializing factory calib info from EEPROM\n");
2030
2031         for (i = 0; i < IWL_NUM_TX_CALIB_GROUPS; i++) {
2032                 s8 *clip_pwrs;  /* table of power levels for each rate */
2033                 s8 satur_pwr;   /* saturation power for each chnl group */
2034                 group = &eeprom->groups[i];
2035
2036                 /* sanity check on factory saturation power value */
2037                 if (group->saturation_power < 40) {
2038                         IWL_WARN(priv, "Error: saturation power is %d, "
2039                                     "less than minimum expected 40\n",
2040                                     group->saturation_power);
2041                         return;
2042                 }
2043
2044                 /*
2045                  * Derive requested power levels for each rate, based on
2046                  *   hardware capabilities (saturation power for band).
2047                  * Basic value is 3dB down from saturation, with further
2048                  *   power reductions for highest 3 data rates.  These
2049                  *   backoffs provide headroom for high rate modulation
2050                  *   power peaks, without too much distortion (clipping).
2051                  */
2052                 /* we'll fill in this array with h/w max power levels */
2053                 clip_pwrs = (s8 *) priv->_3945.clip_groups[i].clip_powers;
2054
2055                 /* divide factory saturation power by 2 to find -3dB level */
2056                 satur_pwr = (s8) (group->saturation_power >> 1);
2057
2058                 /* fill in channel group's nominal powers for each rate */
2059                 for (rate_index = 0;
2060                      rate_index < IWL_RATE_COUNT_3945; rate_index++, clip_pwrs++) {
2061                         switch (rate_index) {
2062                         case IWL_RATE_36M_INDEX_TABLE:
2063                                 if (i == 0)     /* B/G */
2064                                         *clip_pwrs = satur_pwr;
2065                                 else    /* A */
2066                                         *clip_pwrs = satur_pwr - 5;
2067                                 break;
2068                         case IWL_RATE_48M_INDEX_TABLE:
2069                                 if (i == 0)
2070                                         *clip_pwrs = satur_pwr - 7;
2071                                 else
2072                                         *clip_pwrs = satur_pwr - 10;
2073                                 break;
2074                         case IWL_RATE_54M_INDEX_TABLE:
2075                                 if (i == 0)
2076                                         *clip_pwrs = satur_pwr - 9;
2077                                 else
2078                                         *clip_pwrs = satur_pwr - 12;
2079                                 break;
2080                         default:
2081                                 *clip_pwrs = satur_pwr;
2082                                 break;
2083                         }
2084                 }
2085         }
2086 }
2087
2088 /**
2089  * iwl3945_txpower_set_from_eeprom - Set channel power info based on EEPROM
2090  *
2091  * Second pass (during init) to set up priv->channel_info
2092  *
2093  * Set up Tx-power settings in our channel info database for each VALID
2094  * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values
2095  * and current temperature.
2096  *
2097  * Since this is based on current temperature (at init time), these values may
2098  * not be valid for very long, but it gives us a starting/default point,
2099  * and allows us to active (i.e. using Tx) scan.
2100  *
2101  * This does *not* write values to NIC, just sets up our internal table.
2102  */
2103 int iwl3945_txpower_set_from_eeprom(struct iwl_priv *priv)
2104 {
2105         struct iwl_channel_info *ch_info = NULL;
2106         struct iwl3945_channel_power_info *pwr_info;
2107         struct iwl3945_eeprom *eeprom = (struct iwl3945_eeprom *)priv->eeprom;
2108         int delta_index;
2109         u8 rate_index;
2110         u8 scan_tbl_index;
2111         const s8 *clip_pwrs;    /* array of power levels for each rate */
2112         u8 gain, dsp_atten;
2113         s8 power;
2114         u8 pwr_index, base_pwr_index, a_band;
2115         u8 i;
2116         int temperature;
2117
2118         /* save temperature reference,
2119          *   so we can determine next time to calibrate */
2120         temperature = iwl3945_hw_reg_txpower_get_temperature(priv);
2121         priv->last_temperature = temperature;
2122
2123         iwl3945_hw_reg_init_channel_groups(priv);
2124
2125         /* initialize Tx power info for each and every channel, 2.4 and 5.x */
2126         for (i = 0, ch_info = priv->channel_info; i < priv->channel_count;
2127              i++, ch_info++) {
2128                 a_band = is_channel_a_band(ch_info);
2129                 if (!is_channel_valid(ch_info))
2130                         continue;
2131
2132                 /* find this channel's channel group (*not* "band") index */
2133                 ch_info->group_index =
2134                         iwl3945_hw_reg_get_ch_grp_index(priv, ch_info);
2135
2136                 /* Get this chnlgrp's rate->max/clip-powers table */
2137                 clip_pwrs = priv->_3945.clip_groups[ch_info->group_index].clip_powers;
2138
2139                 /* calculate power index *adjustment* value according to
2140                  *  diff between current temperature and factory temperature */
2141                 delta_index = iwl3945_hw_reg_adjust_power_by_temp(temperature,
2142                                 eeprom->groups[ch_info->group_index].
2143                                 temperature);
2144
2145                 IWL_DEBUG_POWER(priv, "Delta index for channel %d: %d [%d]\n",
2146                                 ch_info->channel, delta_index, temperature +
2147                                 IWL_TEMP_CONVERT);
2148
2149                 /* set tx power value for all OFDM rates */
2150                 for (rate_index = 0; rate_index < IWL_OFDM_RATES;
2151                      rate_index++) {
2152                         s32 uninitialized_var(power_idx);
2153                         int rc;
2154
2155                         /* use channel group's clip-power table,
2156                          *   but don't exceed channel's max power */
2157                         s8 pwr = min(ch_info->max_power_avg,
2158                                      clip_pwrs[rate_index]);
2159
2160                         pwr_info = &ch_info->power_info[rate_index];
2161
2162                         /* get base (i.e. at factory-measured temperature)
2163                          *    power table index for this rate's power */
2164                         rc = iwl3945_hw_reg_get_matched_power_index(priv, pwr,
2165                                                          ch_info->group_index,
2166                                                          &power_idx);
2167                         if (rc) {
2168                                 IWL_ERR(priv, "Invalid power index\n");
2169                                 return rc;
2170                         }
2171                         pwr_info->base_power_index = (u8) power_idx;
2172
2173                         /* temperature compensate */
2174                         power_idx += delta_index;
2175
2176                         /* stay within range of gain table */
2177                         power_idx = iwl3945_hw_reg_fix_power_index(power_idx);
2178
2179                         /* fill 1 OFDM rate's iwl3945_channel_power_info struct */
2180                         pwr_info->requested_power = pwr;
2181                         pwr_info->power_table_index = (u8) power_idx;
2182                         pwr_info->tpc.tx_gain =
2183                             power_gain_table[a_band][power_idx].tx_gain;
2184                         pwr_info->tpc.dsp_atten =
2185                             power_gain_table[a_band][power_idx].dsp_atten;
2186                 }
2187
2188                 /* set tx power for CCK rates, based on OFDM 12 Mbit settings*/
2189                 pwr_info = &ch_info->power_info[IWL_RATE_12M_INDEX_TABLE];
2190                 power = pwr_info->requested_power +
2191                         IWL_CCK_FROM_OFDM_POWER_DIFF;
2192                 pwr_index = pwr_info->power_table_index +
2193                         IWL_CCK_FROM_OFDM_INDEX_DIFF;
2194                 base_pwr_index = pwr_info->base_power_index +
2195                         IWL_CCK_FROM_OFDM_INDEX_DIFF;
2196
2197                 /* stay within table range */
2198                 pwr_index = iwl3945_hw_reg_fix_power_index(pwr_index);
2199                 gain = power_gain_table[a_band][pwr_index].tx_gain;
2200                 dsp_atten = power_gain_table[a_band][pwr_index].dsp_atten;
2201
2202                 /* fill each CCK rate's iwl3945_channel_power_info structure
2203                  * NOTE:  All CCK-rate Txpwrs are the same for a given chnl!
2204                  * NOTE:  CCK rates start at end of OFDM rates! */
2205                 for (rate_index = 0;
2206                      rate_index < IWL_CCK_RATES; rate_index++) {
2207                         pwr_info = &ch_info->power_info[rate_index+IWL_OFDM_RATES];
2208                         pwr_info->requested_power = power;
2209                         pwr_info->power_table_index = pwr_index;
2210                         pwr_info->base_power_index = base_pwr_index;
2211                         pwr_info->tpc.tx_gain = gain;
2212                         pwr_info->tpc.dsp_atten = dsp_atten;
2213                 }
2214
2215                 /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
2216                 for (scan_tbl_index = 0;
2217                      scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) {
2218                         s32 actual_index = (scan_tbl_index == 0) ?
2219                                 IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE;
2220                         iwl3945_hw_reg_set_scan_power(priv, scan_tbl_index,
2221                                 actual_index, clip_pwrs, ch_info, a_band);
2222                 }
2223         }
2224
2225         return 0;
2226 }
2227
2228 int iwl3945_hw_rxq_stop(struct iwl_priv *priv)
2229 {
2230         int rc;
2231
2232         iwl_write_direct32(priv, FH39_RCSR_CONFIG(0), 0);
2233         rc = iwl_poll_direct_bit(priv, FH39_RSSR_STATUS,
2234                         FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
2235         if (rc < 0)
2236                 IWL_ERR(priv, "Can't stop Rx DMA.\n");
2237
2238         return 0;
2239 }
2240
2241 int iwl3945_hw_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq)
2242 {
2243         int txq_id = txq->q.id;
2244
2245         struct iwl3945_shared *shared_data = priv->_3945.shared_virt;
2246
2247         shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32)txq->q.dma_addr);
2248
2249         iwl_write_direct32(priv, FH39_CBCC_CTRL(txq_id), 0);
2250         iwl_write_direct32(priv, FH39_CBCC_BASE(txq_id), 0);
2251
2252         iwl_write_direct32(priv, FH39_TCSR_CONFIG(txq_id),
2253                 FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT |
2254                 FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF |
2255                 FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD |
2256                 FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL |
2257                 FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE);
2258
2259         /* fake read to flush all prev. writes */
2260         iwl_read32(priv, FH39_TSSR_CBB_BASE);
2261
2262         return 0;
2263 }
2264
2265 /*
2266  * HCMD utils
2267  */
2268 static u16 iwl3945_get_hcmd_size(u8 cmd_id, u16 len)
2269 {
2270         switch (cmd_id) {
2271         case REPLY_RXON:
2272                 return sizeof(struct iwl3945_rxon_cmd);
2273         case POWER_TABLE_CMD:
2274                 return sizeof(struct iwl3945_powertable_cmd);
2275         default:
2276                 return len;
2277         }
2278 }
2279
2280
2281 static u16 iwl3945_build_addsta_hcmd(const struct iwl_addsta_cmd *cmd, u8 *data)
2282 {
2283         struct iwl3945_addsta_cmd *addsta = (struct iwl3945_addsta_cmd *)data;
2284         addsta->mode = cmd->mode;
2285         memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
2286         memcpy(&addsta->key, &cmd->key, sizeof(struct iwl4965_keyinfo));
2287         addsta->station_flags = cmd->station_flags;
2288         addsta->station_flags_msk = cmd->station_flags_msk;
2289         addsta->tid_disable_tx = cpu_to_le16(0);
2290         addsta->rate_n_flags = cmd->rate_n_flags;
2291         addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
2292         addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
2293         addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
2294
2295         return (u16)sizeof(struct iwl3945_addsta_cmd);
2296 }
2297
2298 static int iwl3945_manage_ibss_station(struct iwl_priv *priv,
2299                                        struct ieee80211_vif *vif, bool add)
2300 {
2301         struct iwl_vif_priv *vif_priv = (void *)vif->drv_priv;
2302         int ret;
2303
2304         if (add) {
2305                 ret = iwl_add_bssid_station(priv, vif->bss_conf.bssid, false,
2306                                             &vif_priv->ibss_bssid_sta_id);
2307                 if (ret)
2308                         return ret;
2309
2310                 iwl3945_sync_sta(priv, vif_priv->ibss_bssid_sta_id,
2311                                  (priv->band == IEEE80211_BAND_5GHZ) ?
2312                                  IWL_RATE_6M_PLCP : IWL_RATE_1M_PLCP);
2313                 iwl3945_rate_scale_init(priv->hw, vif_priv->ibss_bssid_sta_id);
2314
2315                 return 0;
2316         }
2317
2318         return iwl_remove_station(priv, vif_priv->ibss_bssid_sta_id,
2319                                   vif->bss_conf.bssid);
2320 }
2321
2322 /**
2323  * iwl3945_init_hw_rate_table - Initialize the hardware rate fallback table
2324  */
2325 int iwl3945_init_hw_rate_table(struct iwl_priv *priv)
2326 {
2327         int rc, i, index, prev_index;
2328         struct iwl3945_rate_scaling_cmd rate_cmd = {
2329                 .reserved = {0, 0, 0},
2330         };
2331         struct iwl3945_rate_scaling_info *table = rate_cmd.table;
2332
2333         for (i = 0; i < ARRAY_SIZE(iwl3945_rates); i++) {
2334                 index = iwl3945_rates[i].table_rs_index;
2335
2336                 table[index].rate_n_flags =
2337                         iwl3945_hw_set_rate_n_flags(iwl3945_rates[i].plcp, 0);
2338                 table[index].try_cnt = priv->retry_rate;
2339                 prev_index = iwl3945_get_prev_ieee_rate(i);
2340                 table[index].next_rate_index =
2341                                 iwl3945_rates[prev_index].table_rs_index;
2342         }
2343
2344         switch (priv->band) {
2345         case IEEE80211_BAND_5GHZ:
2346                 IWL_DEBUG_RATE(priv, "Select A mode rate scale\n");
2347                 /* If one of the following CCK rates is used,
2348                  * have it fall back to the 6M OFDM rate */
2349                 for (i = IWL_RATE_1M_INDEX_TABLE;
2350                         i <= IWL_RATE_11M_INDEX_TABLE; i++)
2351                         table[i].next_rate_index =
2352                           iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index;
2353
2354                 /* Don't fall back to CCK rates */
2355                 table[IWL_RATE_12M_INDEX_TABLE].next_rate_index =
2356                                                 IWL_RATE_9M_INDEX_TABLE;
2357
2358                 /* Don't drop out of OFDM rates */
2359                 table[IWL_RATE_6M_INDEX_TABLE].next_rate_index =
2360                     iwl3945_rates[IWL_FIRST_OFDM_RATE].table_rs_index;
2361                 break;
2362
2363         case IEEE80211_BAND_2GHZ:
2364                 IWL_DEBUG_RATE(priv, "Select B/G mode rate scale\n");
2365                 /* If an OFDM rate is used, have it fall back to the
2366                  * 1M CCK rates */
2367
2368                 if (!(priv->_3945.sta_supp_rates & IWL_OFDM_RATES_MASK) &&
2369                     iwl_is_associated(priv)) {
2370
2371                         index = IWL_FIRST_CCK_RATE;
2372                         for (i = IWL_RATE_6M_INDEX_TABLE;
2373                              i <= IWL_RATE_54M_INDEX_TABLE; i++)
2374                                 table[i].next_rate_index =
2375                                         iwl3945_rates[index].table_rs_index;
2376
2377                         index = IWL_RATE_11M_INDEX_TABLE;
2378                         /* CCK shouldn't fall back to OFDM... */
2379                         table[index].next_rate_index = IWL_RATE_5M_INDEX_TABLE;
2380                 }
2381                 break;
2382
2383         default:
2384                 WARN_ON(1);
2385                 break;
2386         }
2387
2388         /* Update the rate scaling for control frame Tx */
2389         rate_cmd.table_id = 0;
2390         rc = iwl_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd),
2391                               &rate_cmd);
2392         if (rc)
2393                 return rc;
2394
2395         /* Update the rate scaling for data frame Tx */
2396         rate_cmd.table_id = 1;
2397         return iwl_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd),
2398                                 &rate_cmd);
2399 }
2400
2401 /* Called when initializing driver */
2402 int iwl3945_hw_set_hw_params(struct iwl_priv *priv)
2403 {
2404         memset((void *)&priv->hw_params, 0,
2405                sizeof(struct iwl_hw_params));
2406
2407         priv->_3945.shared_virt =
2408                 dma_alloc_coherent(&priv->pci_dev->dev,
2409                                    sizeof(struct iwl3945_shared),
2410                                    &priv->_3945.shared_phys, GFP_KERNEL);
2411         if (!priv->_3945.shared_virt) {
2412                 IWL_ERR(priv, "failed to allocate pci memory\n");
2413                 return -ENOMEM;
2414         }
2415
2416         /* Assign number of Usable TX queues */
2417         priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
2418
2419         priv->hw_params.tfd_size = sizeof(struct iwl3945_tfd);
2420         priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_3K);
2421         priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
2422         priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
2423         priv->hw_params.max_stations = IWL3945_STATION_COUNT;
2424         priv->hw_params.bcast_sta_id = IWL3945_BROADCAST_ID;
2425
2426         priv->hw_params.rx_wrt_ptr_reg = FH39_RSCSR_CHNL0_WPTR;
2427         priv->hw_params.max_beacon_itrvl = IWL39_MAX_UCODE_BEACON_INTERVAL;
2428         priv->hw_params.beacon_time_tsf_bits = IWL3945_EXT_BEACON_TIME_POS;
2429
2430         return 0;
2431 }
2432
2433 unsigned int iwl3945_hw_get_beacon_cmd(struct iwl_priv *priv,
2434                           struct iwl3945_frame *frame, u8 rate)
2435 {
2436         struct iwl3945_tx_beacon_cmd *tx_beacon_cmd;
2437         unsigned int frame_size;
2438
2439         tx_beacon_cmd = (struct iwl3945_tx_beacon_cmd *)&frame->u;
2440         memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
2441
2442         tx_beacon_cmd->tx.sta_id = priv->hw_params.bcast_sta_id;
2443         tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
2444
2445         frame_size = iwl3945_fill_beacon_frame(priv,
2446                                 tx_beacon_cmd->frame,
2447                                 sizeof(frame->u) - sizeof(*tx_beacon_cmd));
2448
2449         BUG_ON(frame_size > MAX_MPDU_SIZE);
2450         tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
2451
2452         tx_beacon_cmd->tx.rate = rate;
2453         tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK |
2454                                       TX_CMD_FLG_TSF_MSK);
2455
2456         /* supp_rates[0] == OFDM start at IWL_FIRST_OFDM_RATE*/
2457         tx_beacon_cmd->tx.supp_rates[0] =
2458                 (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF;
2459
2460         tx_beacon_cmd->tx.supp_rates[1] =
2461                 (IWL_CCK_BASIC_RATES_MASK & 0xF);
2462
2463         return sizeof(struct iwl3945_tx_beacon_cmd) + frame_size;
2464 }
2465
2466 void iwl3945_hw_rx_handler_setup(struct iwl_priv *priv)
2467 {
2468         priv->rx_handlers[REPLY_TX] = iwl3945_rx_reply_tx;
2469         priv->rx_handlers[REPLY_3945_RX] = iwl3945_rx_reply_rx;
2470 }
2471
2472 void iwl3945_hw_setup_deferred_work(struct iwl_priv *priv)
2473 {
2474         INIT_DELAYED_WORK(&priv->_3945.thermal_periodic,
2475                           iwl3945_bg_reg_txpower_periodic);
2476 }
2477
2478 void iwl3945_hw_cancel_deferred_work(struct iwl_priv *priv)
2479 {
2480         cancel_delayed_work(&priv->_3945.thermal_periodic);
2481 }
2482
2483 /* check contents of special bootstrap uCode SRAM */
2484 static int iwl3945_verify_bsm(struct iwl_priv *priv)
2485  {
2486         __le32 *image = priv->ucode_boot.v_addr;
2487         u32 len = priv->ucode_boot.len;
2488         u32 reg;
2489         u32 val;
2490
2491         IWL_DEBUG_INFO(priv, "Begin verify bsm\n");
2492
2493         /* verify BSM SRAM contents */
2494         val = iwl_read_prph(priv, BSM_WR_DWCOUNT_REG);
2495         for (reg = BSM_SRAM_LOWER_BOUND;
2496              reg < BSM_SRAM_LOWER_BOUND + len;
2497              reg += sizeof(u32), image++) {
2498                 val = iwl_read_prph(priv, reg);
2499                 if (val != le32_to_cpu(*image)) {
2500                         IWL_ERR(priv, "BSM uCode verification failed at "
2501                                   "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
2502                                   BSM_SRAM_LOWER_BOUND,
2503                                   reg - BSM_SRAM_LOWER_BOUND, len,
2504                                   val, le32_to_cpu(*image));
2505                         return -EIO;
2506                 }
2507         }
2508
2509         IWL_DEBUG_INFO(priv, "BSM bootstrap uCode image OK\n");
2510
2511         return 0;
2512 }
2513
2514
2515 /******************************************************************************
2516  *
2517  * EEPROM related functions
2518  *
2519  ******************************************************************************/
2520
2521 /*
2522  * Clear the OWNER_MSK, to establish driver (instead of uCode running on
2523  * embedded controller) as EEPROM reader; each read is a series of pulses
2524  * to/from the EEPROM chip, not a single event, so even reads could conflict
2525  * if they weren't arbitrated by some ownership mechanism.  Here, the driver
2526  * simply claims ownership, which should be safe when this function is called
2527  * (i.e. before loading uCode!).
2528  */
2529 static int iwl3945_eeprom_acquire_semaphore(struct iwl_priv *priv)
2530 {
2531         _iwl_clear_bit(priv, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK);
2532         return 0;
2533 }
2534
2535
2536 static void iwl3945_eeprom_release_semaphore(struct iwl_priv *priv)
2537 {
2538         return;
2539 }
2540
2541  /**
2542   * iwl3945_load_bsm - Load bootstrap instructions
2543   *
2544   * BSM operation:
2545   *
2546   * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
2547   * in special SRAM that does not power down during RFKILL.  When powering back
2548   * up after power-saving sleeps (or during initial uCode load), the BSM loads
2549   * the bootstrap program into the on-board processor, and starts it.
2550   *
2551   * The bootstrap program loads (via DMA) instructions and data for a new
2552   * program from host DRAM locations indicated by the host driver in the
2553   * BSM_DRAM_* registers.  Once the new program is loaded, it starts
2554   * automatically.
2555   *
2556   * When initializing the NIC, the host driver points the BSM to the
2557   * "initialize" uCode image.  This uCode sets up some internal data, then
2558   * notifies host via "initialize alive" that it is complete.
2559   *
2560   * The host then replaces the BSM_DRAM_* pointer values to point to the
2561   * normal runtime uCode instructions and a backup uCode data cache buffer
2562   * (filled initially with starting data values for the on-board processor),
2563   * then triggers the "initialize" uCode to load and launch the runtime uCode,
2564   * which begins normal operation.
2565   *
2566   * When doing a power-save shutdown, runtime uCode saves data SRAM into
2567   * the backup data cache in DRAM before SRAM is powered down.
2568   *
2569   * When powering back up, the BSM loads the bootstrap program.  This reloads
2570   * the runtime uCode instructions and the backup data cache into SRAM,
2571   * and re-launches the runtime uCode from where it left off.
2572   */
2573 static int iwl3945_load_bsm(struct iwl_priv *priv)
2574 {
2575         __le32 *image = priv->ucode_boot.v_addr;
2576         u32 len = priv->ucode_boot.len;
2577         dma_addr_t pinst;
2578         dma_addr_t pdata;
2579         u32 inst_len;
2580         u32 data_len;
2581         int rc;
2582         int i;
2583         u32 done;
2584         u32 reg_offset;
2585
2586         IWL_DEBUG_INFO(priv, "Begin load bsm\n");
2587
2588         /* make sure bootstrap program is no larger than BSM's SRAM size */
2589         if (len > IWL39_MAX_BSM_SIZE)
2590                 return -EINVAL;
2591
2592         /* Tell bootstrap uCode where to find the "Initialize" uCode
2593         *   in host DRAM ... host DRAM physical address bits 31:0 for 3945.
2594         * NOTE:  iwl3945_initialize_alive_start() will replace these values,
2595         *        after the "initialize" uCode has run, to point to
2596         *        runtime/protocol instructions and backup data cache. */
2597         pinst = priv->ucode_init.p_addr;
2598         pdata = priv->ucode_init_data.p_addr;
2599         inst_len = priv->ucode_init.len;
2600         data_len = priv->ucode_init_data.len;
2601
2602         iwl_write_prph(priv, BSM_DRAM_INST_PTR_REG, pinst);
2603         iwl_write_prph(priv, BSM_DRAM_DATA_PTR_REG, pdata);
2604         iwl_write_prph(priv, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
2605         iwl_write_prph(priv, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
2606
2607         /* Fill BSM memory with bootstrap instructions */
2608         for (reg_offset = BSM_SRAM_LOWER_BOUND;
2609              reg_offset < BSM_SRAM_LOWER_BOUND + len;
2610              reg_offset += sizeof(u32), image++)
2611                 _iwl_write_prph(priv, reg_offset,
2612                                           le32_to_cpu(*image));
2613
2614         rc = iwl3945_verify_bsm(priv);
2615         if (rc)
2616                 return rc;
2617
2618         /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
2619         iwl_write_prph(priv, BSM_WR_MEM_SRC_REG, 0x0);
2620         iwl_write_prph(priv, BSM_WR_MEM_DST_REG,
2621                                  IWL39_RTC_INST_LOWER_BOUND);
2622         iwl_write_prph(priv, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
2623
2624         /* Load bootstrap code into instruction SRAM now,
2625          *   to prepare to load "initialize" uCode */
2626         iwl_write_prph(priv, BSM_WR_CTRL_REG,
2627                 BSM_WR_CTRL_REG_BIT_START);
2628
2629         /* Wait for load of bootstrap uCode to finish */
2630         for (i = 0; i < 100; i++) {
2631                 done = iwl_read_prph(priv, BSM_WR_CTRL_REG);
2632                 if (!(done & BSM_WR_CTRL_REG_BIT_START))
2633                         break;
2634                 udelay(10);
2635         }
2636         if (i < 100)
2637                 IWL_DEBUG_INFO(priv, "BSM write complete, poll %d iterations\n", i);
2638         else {
2639                 IWL_ERR(priv, "BSM write did not complete!\n");
2640                 return -EIO;
2641         }
2642
2643         /* Enable future boot loads whenever power management unit triggers it
2644          *   (e.g. when powering back up after power-save shutdown) */
2645         iwl_write_prph(priv, BSM_WR_CTRL_REG,
2646                 BSM_WR_CTRL_REG_BIT_START_EN);
2647
2648         return 0;
2649 }
2650
2651 static struct iwl_hcmd_ops iwl3945_hcmd = {
2652         .rxon_assoc = iwl3945_send_rxon_assoc,
2653         .commit_rxon = iwl3945_commit_rxon,
2654         .send_bt_config = iwl_send_bt_config,
2655 };
2656
2657 static struct iwl_lib_ops iwl3945_lib = {
2658         .txq_attach_buf_to_tfd = iwl3945_hw_txq_attach_buf_to_tfd,
2659         .txq_free_tfd = iwl3945_hw_txq_free_tfd,
2660         .txq_init = iwl3945_hw_tx_queue_init,
2661         .load_ucode = iwl3945_load_bsm,
2662         .dump_nic_event_log = iwl3945_dump_nic_event_log,
2663         .dump_nic_error_log = iwl3945_dump_nic_error_log,
2664         .apm_ops = {
2665                 .init = iwl3945_apm_init,
2666                 .stop = iwl_apm_stop,
2667                 .config = iwl3945_nic_config,
2668                 .set_pwr_src = iwl3945_set_pwr_src,
2669         },
2670         .eeprom_ops = {
2671                 .regulatory_bands = {
2672                         EEPROM_REGULATORY_BAND_1_CHANNELS,
2673                         EEPROM_REGULATORY_BAND_2_CHANNELS,
2674                         EEPROM_REGULATORY_BAND_3_CHANNELS,
2675                         EEPROM_REGULATORY_BAND_4_CHANNELS,
2676                         EEPROM_REGULATORY_BAND_5_CHANNELS,
2677                         EEPROM_REGULATORY_BAND_NO_HT40,
2678                         EEPROM_REGULATORY_BAND_NO_HT40,
2679                 },
2680                 .verify_signature  = iwlcore_eeprom_verify_signature,
2681                 .acquire_semaphore = iwl3945_eeprom_acquire_semaphore,
2682                 .release_semaphore = iwl3945_eeprom_release_semaphore,
2683                 .query_addr = iwlcore_eeprom_query_addr,
2684         },
2685         .send_tx_power  = iwl3945_send_tx_power,
2686         .is_valid_rtc_data_addr = iwl3945_hw_valid_rtc_data_addr,
2687         .post_associate = iwl3945_post_associate,
2688         .isr = iwl_isr_legacy,
2689         .config_ap = iwl3945_config_ap,
2690         .manage_ibss_station = iwl3945_manage_ibss_station,
2691         .recover_from_tx_stall = iwl_bg_monitor_recover,
2692         .check_plcp_health = iwl3945_good_plcp_health,
2693
2694         .debugfs_ops = {
2695                 .rx_stats_read = iwl3945_ucode_rx_stats_read,
2696                 .tx_stats_read = iwl3945_ucode_tx_stats_read,
2697                 .general_stats_read = iwl3945_ucode_general_stats_read,
2698         },
2699 };
2700
2701 static struct iwl_hcmd_utils_ops iwl3945_hcmd_utils = {
2702         .get_hcmd_size = iwl3945_get_hcmd_size,
2703         .build_addsta_hcmd = iwl3945_build_addsta_hcmd,
2704         .tx_cmd_protection = iwlcore_tx_cmd_protection,
2705         .request_scan = iwl3945_request_scan,
2706 };
2707
2708 static const struct iwl_ops iwl3945_ops = {
2709         .lib = &iwl3945_lib,
2710         .hcmd = &iwl3945_hcmd,
2711         .utils = &iwl3945_hcmd_utils,
2712         .led = &iwl3945_led_ops,
2713 };
2714
2715 static struct iwl_cfg iwl3945_bg_cfg = {
2716         .name = "3945BG",
2717         .fw_name_pre = IWL3945_FW_PRE,
2718         .ucode_api_max = IWL3945_UCODE_API_MAX,
2719         .ucode_api_min = IWL3945_UCODE_API_MIN,
2720         .sku = IWL_SKU_G,
2721         .eeprom_size = IWL3945_EEPROM_IMG_SIZE,
2722         .eeprom_ver = EEPROM_3945_EEPROM_VERSION,
2723         .ops = &iwl3945_ops,
2724         .num_of_queues = IWL39_NUM_QUEUES,
2725         .mod_params = &iwl3945_mod_params,
2726         .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL,
2727         .set_l0s = false,
2728         .use_bsm = true,
2729         .use_isr_legacy = true,
2730         .ht_greenfield_support = false,
2731         .led_compensation = 64,
2732         .broken_powersave = true,
2733         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
2734         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
2735         .max_event_log_size = 512,
2736         .tx_power_by_driver = true,
2737 };
2738
2739 static struct iwl_cfg iwl3945_abg_cfg = {
2740         .name = "3945ABG",
2741         .fw_name_pre = IWL3945_FW_PRE,
2742         .ucode_api_max = IWL3945_UCODE_API_MAX,
2743         .ucode_api_min = IWL3945_UCODE_API_MIN,
2744         .sku = IWL_SKU_A|IWL_SKU_G,
2745         .eeprom_size = IWL3945_EEPROM_IMG_SIZE,
2746         .eeprom_ver = EEPROM_3945_EEPROM_VERSION,
2747         .ops = &iwl3945_ops,
2748         .num_of_queues = IWL39_NUM_QUEUES,
2749         .mod_params = &iwl3945_mod_params,
2750         .use_isr_legacy = true,
2751         .ht_greenfield_support = false,
2752         .led_compensation = 64,
2753         .broken_powersave = true,
2754         .plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF,
2755         .monitor_recover_period = IWL_DEF_MONITORING_PERIOD,
2756         .max_event_log_size = 512,
2757         .tx_power_by_driver = true,
2758 };
2759
2760 DEFINE_PCI_DEVICE_TABLE(iwl3945_hw_card_ids) = {
2761         {IWL_PCI_DEVICE(0x4222, 0x1005, iwl3945_bg_cfg)},
2762         {IWL_PCI_DEVICE(0x4222, 0x1034, iwl3945_bg_cfg)},
2763         {IWL_PCI_DEVICE(0x4222, 0x1044, iwl3945_bg_cfg)},
2764         {IWL_PCI_DEVICE(0x4227, 0x1014, iwl3945_bg_cfg)},
2765         {IWL_PCI_DEVICE(0x4222, PCI_ANY_ID, iwl3945_abg_cfg)},
2766         {IWL_PCI_DEVICE(0x4227, PCI_ANY_ID, iwl3945_abg_cfg)},
2767         {0}
2768 };
2769
2770 MODULE_DEVICE_TABLE(pci, iwl3945_hw_card_ids);