]> bbs.cooldavid.org Git - net-next-2.6.git/blob - drivers/net/stmmac/dwmac1000_dma.c
stmmac: rework normal and enhanced descriptors
[net-next-2.6.git] / drivers / net / stmmac / dwmac1000_dma.c
1 /*******************************************************************************
2   This is the driver for the GMAC on-chip Ethernet controller for ST SoCs.
3   DWC Ether MAC 10/100/1000 Universal version 3.41a  has been used for
4   developing this code.
5
6   This contains the functions to handle the dma.
7
8   Copyright (C) 2007-2009  STMicroelectronics Ltd
9
10   This program is free software; you can redistribute it and/or modify it
11   under the terms and conditions of the GNU General Public License,
12   version 2, as published by the Free Software Foundation.
13
14   This program is distributed in the hope it will be useful, but WITHOUT
15   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
16   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
17   more details.
18
19   You should have received a copy of the GNU General Public License along with
20   this program; if not, write to the Free Software Foundation, Inc.,
21   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
22
23   The full GNU General Public License is included in this distribution in
24   the file called "COPYING".
25
26   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
27 *******************************************************************************/
28
29 #include "dwmac1000.h"
30 #include "dwmac_dma.h"
31
32 static int dwmac1000_dma_init(unsigned long ioaddr, int pbl, u32 dma_tx,
33                               u32 dma_rx)
34 {
35         u32 value = readl(ioaddr + DMA_BUS_MODE);
36         /* DMA SW reset */
37         value |= DMA_BUS_MODE_SFT_RESET;
38         writel(value, ioaddr + DMA_BUS_MODE);
39         do {} while ((readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET));
40
41         value = /* DMA_BUS_MODE_FB | */ DMA_BUS_MODE_4PBL |
42             ((pbl << DMA_BUS_MODE_PBL_SHIFT) |
43              (pbl << DMA_BUS_MODE_RPBL_SHIFT));
44
45 #ifdef CONFIG_STMMAC_DA
46         value |= DMA_BUS_MODE_DA;       /* Rx has priority over tx */
47 #endif
48         writel(value, ioaddr + DMA_BUS_MODE);
49
50         /* Mask interrupts by writing to CSR7 */
51         writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
52
53         /* The base address of the RX/TX descriptor lists must be written into
54          * DMA CSR3 and CSR4, respectively. */
55         writel(dma_tx, ioaddr + DMA_TX_BASE_ADDR);
56         writel(dma_rx, ioaddr + DMA_RCV_BASE_ADDR);
57
58         return 0;
59 }
60
61 /* Transmit FIFO flush operation */
62 static void dwmac1000_flush_tx_fifo(unsigned long ioaddr)
63 {
64         u32 csr6 = readl(ioaddr + DMA_CONTROL);
65         writel((csr6 | DMA_CONTROL_FTF), ioaddr + DMA_CONTROL);
66
67         do {} while ((readl(ioaddr + DMA_CONTROL) & DMA_CONTROL_FTF));
68 }
69
70 static void dwmac1000_dma_operation_mode(unsigned long ioaddr, int txmode,
71                                     int rxmode)
72 {
73         u32 csr6 = readl(ioaddr + DMA_CONTROL);
74
75         if (txmode == SF_DMA_MODE) {
76                 CHIP_DBG(KERN_DEBUG "GMAC: enable TX store and forward mode\n");
77                 /* Transmit COE type 2 cannot be done in cut-through mode. */
78                 csr6 |= DMA_CONTROL_TSF;
79                 /* Operating on second frame increase the performance
80                  * especially when transmit store-and-forward is used.*/
81                 csr6 |= DMA_CONTROL_OSF;
82         } else {
83                 CHIP_DBG(KERN_DEBUG "GMAC: disabling TX store and forward mode"
84                               " (threshold = %d)\n", txmode);
85                 csr6 &= ~DMA_CONTROL_TSF;
86                 csr6 &= DMA_CONTROL_TC_TX_MASK;
87                 /* Set the transmit threshold */
88                 if (txmode <= 32)
89                         csr6 |= DMA_CONTROL_TTC_32;
90                 else if (txmode <= 64)
91                         csr6 |= DMA_CONTROL_TTC_64;
92                 else if (txmode <= 128)
93                         csr6 |= DMA_CONTROL_TTC_128;
94                 else if (txmode <= 192)
95                         csr6 |= DMA_CONTROL_TTC_192;
96                 else
97                         csr6 |= DMA_CONTROL_TTC_256;
98         }
99
100         if (rxmode == SF_DMA_MODE) {
101                 CHIP_DBG(KERN_DEBUG "GMAC: enable RX store and forward mode\n");
102                 csr6 |= DMA_CONTROL_RSF;
103         } else {
104                 CHIP_DBG(KERN_DEBUG "GMAC: disabling RX store and forward mode"
105                               " (threshold = %d)\n", rxmode);
106                 csr6 &= ~DMA_CONTROL_RSF;
107                 csr6 &= DMA_CONTROL_TC_RX_MASK;
108                 if (rxmode <= 32)
109                         csr6 |= DMA_CONTROL_RTC_32;
110                 else if (rxmode <= 64)
111                         csr6 |= DMA_CONTROL_RTC_64;
112                 else if (rxmode <= 96)
113                         csr6 |= DMA_CONTROL_RTC_96;
114                 else
115                         csr6 |= DMA_CONTROL_RTC_128;
116         }
117
118         writel(csr6, ioaddr + DMA_CONTROL);
119         return;
120 }
121
122 /* Not yet implemented --- no RMON module */
123 static void dwmac1000_dma_diagnostic_fr(void *data,
124                   struct stmmac_extra_stats *x, unsigned long ioaddr)
125 {
126         return;
127 }
128
129 static void dwmac1000_dump_dma_regs(unsigned long ioaddr)
130 {
131         int i;
132         pr_info(" DMA registers\n");
133         for (i = 0; i < 22; i++) {
134                 if ((i < 9) || (i > 17)) {
135                         int offset = i * 4;
136                         pr_err("\t Reg No. %d (offset 0x%x): 0x%08x\n", i,
137                                (DMA_BUS_MODE + offset),
138                                readl(ioaddr + DMA_BUS_MODE + offset));
139                 }
140         }
141         return;
142 }
143
144 struct stmmac_dma_ops dwmac1000_dma_ops = {
145         .init = dwmac1000_dma_init,
146         .dump_regs = dwmac1000_dump_dma_regs,
147         .dma_mode = dwmac1000_dma_operation_mode,
148         .dma_diagnostic_fr = dwmac1000_dma_diagnostic_fr,
149         .enable_dma_transmission = dwmac_enable_dma_transmission,
150         .enable_dma_irq = dwmac_enable_dma_irq,
151         .disable_dma_irq = dwmac_disable_dma_irq,
152         .start_tx = dwmac_dma_start_tx,
153         .stop_tx = dwmac_dma_stop_tx,
154         .start_rx = dwmac_dma_start_rx,
155         .stop_rx = dwmac_dma_stop_rx,
156         .dma_interrupt = dwmac_dma_interrupt,
157 };