drivers/mtd/onenand/onenand_base.c

   1 /*
   2  *  linux/drivers/mtd/onenand/onenand_base.c
   3  *
   4  *  Copyright (C) 2005-2007 Samsung Electronics
   5  *  Kyungmin Park <kyungmin.park@samsung.com>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2 as
   9  * published by the Free Software Foundation.
  10  */
  11
  12 #include <linux/kernel.h>
  13 #include <linux/module.h>
  14 #include <linux/init.h>
  15 #include <linux/sched.h>
  16 #include <linux/interrupt.h>
  17 #include <linux/jiffies.h>
  18 #include <linux/mtd/mtd.h>
  19 #include <linux/mtd/onenand.h>
  20 #include <linux/mtd/partitions.h>
  21
  22 #include <asm/io.h>
  23
  24 /**
  25  * onenand_oob_64 - oob info for large (2KB) page
  26  */
  27 static struct nand_ecclayout onenand_oob_64 = {
  28         .eccbytes       = 20,
  29         .eccpos         = {
  30                 8, 9, 10, 11, 12,
  31                 24, 25, 26, 27, 28,
  32                 40, 41, 42, 43, 44,
  33                 56, 57, 58, 59, 60,
  34                 },
  35         .oobfree        = {
  36                 {2, 3}, {14, 2}, {18, 3}, {30, 2},
  37                 {34, 3}, {46, 2}, {50, 3}, {62, 2}
  38         }
  39 };
  40
  41 /**
  42  * onenand_oob_32 - oob info for middle (1KB) page
  43  */
  44 static struct nand_ecclayout onenand_oob_32 = {
  45         .eccbytes       = 10,
  46         .eccpos         = {
  47                 8, 9, 10, 11, 12,
  48                 24, 25, 26, 27, 28,
  49                 },
  50         .oobfree        = { {2, 3}, {14, 2}, {18, 3}, {30, 2} }
  51 };
  52
  53 static const unsigned char ffchars[] = {
  54         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
  55         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 16 */
  56         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
  57         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 32 */
  58         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
  59         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 48 */
  60         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
  61         0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 64 */
  62 };
  63
  64 /**
  65  * onenand_readw - [OneNAND Interface] Read OneNAND register
  66  * @param addr          address to read
  67  *
  68  * Read OneNAND register
  69  */
  70 static unsigned short onenand_readw(void __iomem *addr)
  71 {
  72         return readw(addr);
  73 }
  74
  75 /**
  76  * onenand_writew - [OneNAND Interface] Write OneNAND register with value
  77  * @param value         value to write
  78  * @param addr          address to write
  79  *
  80  * Write OneNAND register with value
  81  */
  82 static void onenand_writew(unsigned short value, void __iomem *addr)
  83 {
  84         writew(value, addr);
  85 }
  86
  87 /**
  88  * onenand_block_address - [DEFAULT] Get block address
  89  * @param this          onenand chip data structure
  90  * @param block         the block
  91  * @return              translated block address if DDP, otherwise same
  92  *
  93  * Setup Start Address 1 Register (F100h)
  94  */
  95 static int onenand_block_address(struct onenand_chip *this, int block)
  96 {
  97         /* Device Flash Core select, NAND Flash Block Address */
  98         if (block & this->density_mask)
  99                 return ONENAND_DDP_CHIP1 | (block ^ this->density_mask);
 100
 101         return block;
 102 }
 103
 104 /**
 105  * onenand_bufferram_address - [DEFAULT] Get bufferram address
 106  * @param this          onenand chip data structure
 107  * @param block         the block
 108  * @return              set DBS value if DDP, otherwise 0
 109  *
 110  * Setup Start Address 2 Register (F101h) for DDP
 111  */
 112 static int onenand_bufferram_address(struct onenand_chip *this, int block)
 113 {
 114         /* Device BufferRAM Select */
 115         if (block & this->density_mask)
 116                 return ONENAND_DDP_CHIP1;
 117
 118         return ONENAND_DDP_CHIP0;
 119 }
 120
 121 /**
 122  * onenand_page_address - [DEFAULT] Get page address
 123  * @param page          the page address
 124  * @param sector        the sector address
 125  * @return              combined page and sector address
 126  *
 127  * Setup Start Address 8 Register (F107h)
 128  */
 129 static int onenand_page_address(int page, int sector)
 130 {
 131         /* Flash Page Address, Flash Sector Address */
 132         int fpa, fsa;
 133
 134         fpa = page & ONENAND_FPA_MASK;
 135         fsa = sector & ONENAND_FSA_MASK;
 136
 137         return ((fpa << ONENAND_FPA_SHIFT) | fsa);
 138 }
 139
 140 /**
 141  * onenand_buffer_address - [DEFAULT] Get buffer address
 142  * @param dataram1      DataRAM index
 143  * @param sectors       the sector address
 144  * @param count         the number of sectors
 145  * @return              the start buffer value
 146  *
 147  * Setup Start Buffer Register (F200h)
 148  */
 149 static int onenand_buffer_address(int dataram1, int sectors, int count)
 150 {
 151         int bsa, bsc;
 152
 153         /* BufferRAM Sector Address */
 154         bsa = sectors & ONENAND_BSA_MASK;
 155
 156         if (dataram1)
 157                 bsa |= ONENAND_BSA_DATARAM1;    /* DataRAM1 */
 158         else
 159                 bsa |= ONENAND_BSA_DATARAM0;    /* DataRAM0 */
 160
 161         /* BufferRAM Sector Count */
 162         bsc = count & ONENAND_BSC_MASK;
 163
 164         return ((bsa << ONENAND_BSA_SHIFT) | bsc);
 165 }
 166
 167 /**
 168  * onenand_command - [DEFAULT] Send command to OneNAND device
 169  * @param mtd           MTD device structure
 170  * @param cmd           the command to be sent
 171  * @param addr          offset to read from or write to
 172  * @param len           number of bytes to read or write
 173  *
 174  * Send command to OneNAND device. This function is used for middle/large page
 175  * devices (1KB/2KB Bytes per page)
 176  */
 177 static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t len)
 178 {
 179         struct onenand_chip *this = mtd->priv;
 180         int value, readcmd = 0, block_cmd = 0;
 181         int block, page;
 182
 183         /* Address translation */
 184         switch (cmd) {
 185         case ONENAND_CMD_UNLOCK:
 186         case ONENAND_CMD_LOCK:
 187         case ONENAND_CMD_LOCK_TIGHT:
 188         case ONENAND_CMD_UNLOCK_ALL:
 189                 block = -1;
 190                 page = -1;
 191                 break;
 192
 193         case ONENAND_CMD_ERASE:
 194         case ONENAND_CMD_BUFFERRAM:
 195         case ONENAND_CMD_OTP_ACCESS:
 196                 block_cmd = 1;
 197                 block = (int) (addr >> this->erase_shift);
 198                 page = -1;
 199                 break;
 200
 201         default:
 202                 block = (int) (addr >> this->erase_shift);
 203                 page = (int) (addr >> this->page_shift);
 204                 page &= this->page_mask;
 205                 break;
 206         }
 207
 208         /* NOTE: The setting order of the registers is very important! */
 209         if (cmd == ONENAND_CMD_BUFFERRAM) {
 210                 /* Select DataRAM for DDP */
 211                 value = onenand_bufferram_address(this, block);
 212                 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
 213
 214                 /* Switch to the next data buffer */
 215                 ONENAND_SET_NEXT_BUFFERRAM(this);
 216
 217                 return 0;
 218         }
 219
 220         if (block != -1) {
 221                 /* Write 'DFS, FBA' of Flash */
 222                 value = onenand_block_address(this, block);
 223                 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
 224
 225                 if (block_cmd) {
 226                         /* Select DataRAM for DDP */
 227                         value = onenand_bufferram_address(this, block);
 228                         this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
 229                 }
 230         }
 231
 232         if (page != -1) {
 233                 /* Now we use page size operation */
 234                 int sectors = 4, count = 4;
 235                 int dataram;
 236
 237                 switch (cmd) {
 238                 case ONENAND_CMD_READ:
 239                 case ONENAND_CMD_READOOB:
 240                         dataram = ONENAND_SET_NEXT_BUFFERRAM(this);
 241                         readcmd = 1;
 242                         break;
 243
 244                 default:
 245                         dataram = ONENAND_CURRENT_BUFFERRAM(this);
 246                         break;
 247                 }
 248
 249                 /* Write 'FPA, FSA' of Flash */
 250                 value = onenand_page_address(page, sectors);
 251                 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS8);
 252
 253                 /* Write 'BSA, BSC' of DataRAM */
 254                 value = onenand_buffer_address(dataram, sectors, count);
 255                 this->write_word(value, this->base + ONENAND_REG_START_BUFFER);
 256
 257                 if (readcmd) {
 258                         /* Select DataRAM for DDP */
 259                         value = onenand_bufferram_address(this, block);
 260                         this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
 261                 }
 262         }
 263
 264         /* Interrupt clear */
 265         this->write_word(ONENAND_INT_CLEAR, this->base + ONENAND_REG_INTERRUPT);
 266
 267         /* Write command */
 268         this->write_word(cmd, this->base + ONENAND_REG_COMMAND);
 269
 270         return 0;
 271 }
 272
 273 /**
 274  * onenand_wait - [DEFAULT] wait until the command is done
 275  * @param mtd           MTD device structure
 276  * @param state         state to select the max. timeout value
 277  *
 278  * Wait for command done. This applies to all OneNAND command
 279  * Read can take up to 30us, erase up to 2ms and program up to 350us
 280  * according to general OneNAND specs
 281  */
 282 static int onenand_wait(struct mtd_info *mtd, int state)
 283 {
 284         struct onenand_chip * this = mtd->priv;
 285         unsigned long timeout;
 286         unsigned int flags = ONENAND_INT_MASTER;
 287         unsigned int interrupt = 0;
 288         unsigned int ctrl;
 289
 290         /* The 20 msec is enough */
 291         timeout = jiffies + msecs_to_jiffies(20);
 292         while (time_before(jiffies, timeout)) {
 293                 interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
 294
 295                 if (interrupt & flags)
 296                         break;
 297
 298                 if (state != FL_READING)
 299                         cond_resched();
 300         }
 301         /* To get correct interrupt status in timeout case */
 302         interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT);
 303
 304         ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS);
 305
 306         if (ctrl & ONENAND_CTRL_ERROR) {
 307                 DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: controller error = 0x%04x\n", ctrl);
 308                 if (ctrl & ONENAND_CTRL_LOCK)
 309                         DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: it's locked error.\n");
 310                 return ctrl;
 311         }
 312
 313         if (interrupt & ONENAND_INT_READ) {
 314                 int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS);
 315                 if (ecc) {
 316                         DEBUG(MTD_DEBUG_LEVEL0, "onenand_wait: ECC error = 0x%04x\n", ecc);
 317                         if (ecc & ONENAND_ECC_2BIT_ALL) {
 318                                 mtd->ecc_stats.failed++;
 319                                 return ecc;
 320                         } else if (ecc & ONENAND_ECC_1BIT_ALL)
 321                                 mtd->ecc_stats.corrected++;
 322                 }
 323         } else if (state == FL_READING) {
 324                 printk(KERN_ERR "onenand_wait: read timeout! ctrl=0x%04x intr=0x%04x\n", ctrl, interrupt);
 325                 return -EIO;
 326         }
 327
 328         return 0;
 329 }
 330
 331 /*
 332  * onenand_interrupt - [DEFAULT] onenand interrupt handler
 333  * @param irq           onenand interrupt number
 334  * @param dev_id        interrupt data
 335  *
 336  * complete the work
 337  */
 338 static irqreturn_t onenand_interrupt(int irq, void *data)
 339 {
 340         struct onenand_chip *this = (struct onenand_chip *) data;
 341
 342         /* To handle shared interrupt */
 343         if (!this->complete.done)
 344                 complete(&this->complete);
 345
 346         return IRQ_HANDLED;
 347 }
 348
 349 /*
 350  * onenand_interrupt_wait - [DEFAULT] wait until the command is done
 351  * @param mtd           MTD device structure
 352  * @param state         state to select the max. timeout value
 353  *
 354  * Wait for command done.
 355  */
 356 static int onenand_interrupt_wait(struct mtd_info *mtd, int state)
 357 {
 358         struct onenand_chip *this = mtd->priv;
 359
 360         wait_for_completion(&this->complete);
 361
 362         return onenand_wait(mtd, state);
 363 }
 364
 365 /*
 366  * onenand_try_interrupt_wait - [DEFAULT] try interrupt wait
 367  * @param mtd           MTD device structure
 368  * @param state         state to select the max. timeout value
 369  *
 370  * Try interrupt based wait (It is used one-time)
 371  */
 372 static int onenand_try_interrupt_wait(struct mtd_info *mtd, int state)
 373 {
 374         struct onenand_chip *this = mtd->priv;
 375         unsigned long remain, timeout;
 376
 377         /* We use interrupt wait first */
 378         this->wait = onenand_interrupt_wait;
 379
 380         timeout = msecs_to_jiffies(100);
 381         remain = wait_for_completion_timeout(&this->complete, timeout);
 382         if (!remain) {
 383                 printk(KERN_INFO "OneNAND: There's no interrupt. "
 384                                 "We use the normal wait\n");
 385
 386                 /* Release the irq */
 387                 free_irq(this->irq, this);
 388
 389                 this->wait = onenand_wait;
 390         }
 391
 392         return onenand_wait(mtd, state);
 393 }
 394
 395 /*
 396  * onenand_setup_wait - [OneNAND Interface] setup onenand wait method
 397  * @param mtd           MTD device structure
 398  *
 399  * There's two method to wait onenand work
 400  * 1. polling - read interrupt status register
 401  * 2. interrupt - use the kernel interrupt method
 402  */
 403 static void onenand_setup_wait(struct mtd_info *mtd)
 404 {
 405         struct onenand_chip *this = mtd->priv;
 406         int syscfg;
 407
 408         init_completion(&this->complete);
 409
 410         if (this->irq <= 0) {
 411                 this->wait = onenand_wait;
 412                 return;
 413         }
 414
 415         if (request_irq(this->irq, &onenand_interrupt,
 416                                 IRQF_SHARED, "onenand", this)) {
 417                 /* If we can't get irq, use the normal wait */
 418                 this->wait = onenand_wait;
 419                 return;
 420         }
 421
 422         /* Enable interrupt */
 423         syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
 424         syscfg |= ONENAND_SYS_CFG1_IOBE;
 425         this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
 426
 427         this->wait = onenand_try_interrupt_wait;
 428 }
 429
 430 /**
 431  * onenand_bufferram_offset - [DEFAULT] BufferRAM offset
 432  * @param mtd           MTD data structure
 433  * @param area          BufferRAM area
 434  * @return              offset given area
 435  *
 436  * Return BufferRAM offset given area
 437  */
 438 static inline int onenand_bufferram_offset(struct mtd_info *mtd, int area)
 439 {
 440         struct onenand_chip *this = mtd->priv;
 441
 442         if (ONENAND_CURRENT_BUFFERRAM(this)) {
 443                 if (area == ONENAND_DATARAM)
 444                         return mtd->writesize;
 445                 if (area == ONENAND_SPARERAM)
 446                         return mtd->oobsize;
 447         }
 448
 449         return 0;
 450 }
 451
 452 /**
 453  * onenand_read_bufferram - [OneNAND Interface] Read the bufferram area
 454  * @param mtd           MTD data structure
 455  * @param area          BufferRAM area
 456  * @param buffer        the databuffer to put/get data
 457  * @param offset        offset to read from or write to
 458  * @param count         number of bytes to read/write
 459  *
 460  * Read the BufferRAM area
 461  */
 462 static int onenand_read_bufferram(struct mtd_info *mtd, int area,
 463                 unsigned char *buffer, int offset, size_t count)
 464 {
 465         struct onenand_chip *this = mtd->priv;
 466         void __iomem *bufferram;
 467
 468         bufferram = this->base + area;
 469
 470         bufferram += onenand_bufferram_offset(mtd, area);
 471
 472         if (ONENAND_CHECK_BYTE_ACCESS(count)) {
 473                 unsigned short word;
 474
 475                 /* Align with word(16-bit) size */
 476                 count--;
 477
 478                 /* Read word and save byte */
 479                 word = this->read_word(bufferram + offset + count);
 480                 buffer[count] = (word & 0xff);
 481         }
 482
 483         memcpy(buffer, bufferram + offset, count);
 484
 485         return 0;
 486 }
 487
 488 /**
 489  * onenand_sync_read_bufferram - [OneNAND Interface] Read the bufferram area with Sync. Burst mode
 490  * @param mtd           MTD data structure
 491  * @param area          BufferRAM area
 492  * @param buffer        the databuffer to put/get data
 493  * @param offset        offset to read from or write to
 494  * @param count         number of bytes to read/write
 495  *
 496  * Read the BufferRAM area with Sync. Burst Mode
 497  */
 498 static int onenand_sync_read_bufferram(struct mtd_info *mtd, int area,
 499                 unsigned char *buffer, int offset, size_t count)
 500 {
 501         struct onenand_chip *this = mtd->priv;
 502         void __iomem *bufferram;
 503
 504         bufferram = this->base + area;
 505
 506         bufferram += onenand_bufferram_offset(mtd, area);
 507
 508         this->mmcontrol(mtd, ONENAND_SYS_CFG1_SYNC_READ);
 509
 510         if (ONENAND_CHECK_BYTE_ACCESS(count)) {
 511                 unsigned short word;
 512
 513                 /* Align with word(16-bit) size */
 514                 count--;
 515
 516                 /* Read word and save byte */
 517                 word = this->read_word(bufferram + offset + count);
 518                 buffer[count] = (word & 0xff);
 519         }
 520
 521         memcpy(buffer, bufferram + offset, count);
 522
 523         this->mmcontrol(mtd, 0);
 524
 525         return 0;
 526 }
 527
 528 /**
 529  * onenand_write_bufferram - [OneNAND Interface] Write the bufferram area
 530  * @param mtd           MTD data structure
 531  * @param area          BufferRAM area
 532  * @param buffer        the databuffer to put/get data
 533  * @param offset        offset to read from or write to
 534  * @param count         number of bytes to read/write
 535  *
 536  * Write the BufferRAM area
 537  */
 538 static int onenand_write_bufferram(struct mtd_info *mtd, int area,
 539                 const unsigned char *buffer, int offset, size_t count)
 540 {
 541         struct onenand_chip *this = mtd->priv;
 542         void __iomem *bufferram;
 543
 544         bufferram = this->base + area;
 545
 546         bufferram += onenand_bufferram_offset(mtd, area);
 547
 548         if (ONENAND_CHECK_BYTE_ACCESS(count)) {
 549                 unsigned short word;
 550                 int byte_offset;
 551
 552                 /* Align with word(16-bit) size */
 553                 count--;
 554
 555                 /* Calculate byte access offset */
 556                 byte_offset = offset + count;
 557
 558                 /* Read word and save byte */
 559                 word = this->read_word(bufferram + byte_offset);
 560                 word = (word & ~0xff) | buffer[count];
 561                 this->write_word(word, bufferram + byte_offset);
 562         }
 563
 564         memcpy(bufferram + offset, buffer, count);
 565
 566         return 0;
 567 }
 568
 569 /**
 570  * onenand_check_bufferram - [GENERIC] Check BufferRAM information
 571  * @param mtd           MTD data structure
 572  * @param addr          address to check
 573  * @return              1 if there are valid data, otherwise 0
 574  *
 575  * Check bufferram if there is data we required
 576  */
 577 static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr)
 578 {
 579         struct onenand_chip *this = mtd->priv;
 580         int block, page;
 581         int i;
 582
 583         block = (int) (addr >> this->erase_shift);
 584         page = (int) (addr >> this->page_shift) & this->page_mask;
 585
 586         i = ONENAND_CURRENT_BUFFERRAM(this);
 587
 588         /* Is there valid data? */
 589         if (this->bufferram[i].block == block &&
 590             this->bufferram[i].page == page &&
 591             this->bufferram[i].valid)
 592                 return 1;
 593
 594         return 0;
 595 }
 596
 597 /**
 598  * onenand_update_bufferram - [GENERIC] Update BufferRAM information
 599  * @param mtd           MTD data structure
 600  * @param addr          address to update
 601  * @param valid         valid flag
 602  *
 603  * Update BufferRAM information
 604  */
 605 static int onenand_update_bufferram(struct mtd_info *mtd, loff_t addr,
 606                 int valid)
 607 {
 608         struct onenand_chip *this = mtd->priv;
 609         int block, page;
 610         int i;
 611
 612         block = (int) (addr >> this->erase_shift);
 613         page = (int) (addr >> this->page_shift) & this->page_mask;
 614
 615         /* Invalidate BufferRAM */
 616         for (i = 0; i < MAX_BUFFERRAM; i++) {
 617                 if (this->bufferram[i].block == block &&
 618                     this->bufferram[i].page == page)
 619                         this->bufferram[i].valid = 0;
 620         }
 621
 622         /* Update BufferRAM */
 623         i = ONENAND_CURRENT_BUFFERRAM(this);
 624         this->bufferram[i].block = block;
 625         this->bufferram[i].page = page;
 626         this->bufferram[i].valid = valid;
 627
 628         return 0;
 629 }
 630
 631 /**
 632  * onenand_get_device - [GENERIC] Get chip for selected access
 633  * @param mtd           MTD device structure
 634  * @param new_state     the state which is requested
 635  *
 636  * Get the device and lock it for exclusive access
 637  */
 638 static int onenand_get_device(struct mtd_info *mtd, int new_state)
 639 {
 640         struct onenand_chip *this = mtd->priv;
 641         DECLARE_WAITQUEUE(wait, current);
 642
 643         /*
 644          * Grab the lock and see if the device is available
 645          */
 646         while (1) {
 647                 spin_lock(&this->chip_lock);
 648                 if (this->state == FL_READY) {
 649                         this->state = new_state;
 650                         spin_unlock(&this->chip_lock);
 651                         break;
 652                 }
 653                 if (new_state == FL_PM_SUSPENDED) {
 654                         spin_unlock(&this->chip_lock);
 655                         return (this->state == FL_PM_SUSPENDED) ? 0 : -EAGAIN;
 656                 }
 657                 set_current_state(TASK_UNINTERRUPTIBLE);
 658                 add_wait_queue(&this->wq, &wait);
 659                 spin_unlock(&this->chip_lock);
 660                 schedule();
 661                 remove_wait_queue(&this->wq, &wait);
 662         }
 663
 664         return 0;
 665 }
 666
 667 /**
 668  * onenand_release_device - [GENERIC] release chip
 669  * @param mtd           MTD device structure
 670  *
 671  * Deselect, release chip lock and wake up anyone waiting on the device
 672  */
 673 static void onenand_release_device(struct mtd_info *mtd)
 674 {
 675         struct onenand_chip *this = mtd->priv;
 676
 677         /* Release the chip */
 678         spin_lock(&this->chip_lock);
 679         this->state = FL_READY;
 680         wake_up(&this->wq);
 681         spin_unlock(&this->chip_lock);
 682 }
 683
 684 /**
 685  * onenand_read - [MTD Interface] Read data from flash
 686  * @param mtd           MTD device structure
 687  * @param from          offset to read from
 688  * @param len           number of bytes to read
 689  * @param retlen        pointer to variable to store the number of read bytes
 690  * @param buf           the databuffer to put data
 691  *
 692  * Read with ecc
 693 */
 694 static int onenand_read(struct mtd_info *mtd, loff_t from, size_t len,
 695         size_t *retlen, u_char *buf)
 696 {
 697         struct onenand_chip *this = mtd->priv;
 698         struct mtd_ecc_stats stats;
 699         int read = 0, column;
 700         int thislen;
 701         int ret = 0, boundary = 0;
 702
 703         DEBUG(MTD_DEBUG_LEVEL3, "onenand_read: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
 704
 705         /* Do not allow reads past end of device */
 706         if ((from + len) > mtd->size) {
 707                 DEBUG(MTD_DEBUG_LEVEL0, "onenand_read: Attempt read beyond end of device\n");
 708                 *retlen = 0;
 709                 return -EINVAL;
 710         }
 711
 712         /* Grab the lock and see if the device is available */
 713         onenand_get_device(mtd, FL_READING);
 714
 715         stats = mtd->ecc_stats;
 716
 717         /* Read-while-load method */
 718
 719         /* Do first load to bufferRAM */
 720         if (read < len) {
 721                 if (!onenand_check_bufferram(mtd, from)) {
 722                         this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize);
 723                         ret = this->wait(mtd, FL_READING);
 724                         onenand_update_bufferram(mtd, from, !ret);
 725                 }
 726         }
 727
 728         thislen = min_t(int, mtd->writesize, len - read);
 729         column = from & (mtd->writesize - 1);
 730         if (column + thislen > mtd->writesize)
 731                 thislen = mtd->writesize - column;
 732
 733         while (!ret) {
 734                 /* If there is more to load then start next load */
 735                 from += thislen;
 736                 if (read + thislen < len) {
 737                         this->command(mtd, ONENAND_CMD_READ, from, mtd->writesize);
 738                         /*
 739                          * Chip boundary handling in DDP
 740                          * Now we issued chip 1 read and pointed chip 1
 741                          * bufferam so we have to point chip 0 bufferam.
 742                          */
 743                         if (ONENAND_IS_DDP(this) &&
 744                             unlikely(from == (this->chipsize >> 1))) {
 745                                 this->write_word(ONENAND_DDP_CHIP0, this->base + ONENAND_REG_START_ADDRESS2);
 746                                 boundary = 1;
 747                         } else
 748                                 boundary = 0;
 749                         ONENAND_SET_PREV_BUFFERRAM(this);
 750                 }
 751                 /* While load is going, read from last bufferRAM */
 752                 this->read_bufferram(mtd, ONENAND_DATARAM, buf, column, thislen);
 753                 /* See if we are done */
 754                 read += thislen;
 755                 if (read == len)
 756                         break;
 757                 /* Set up for next read from bufferRAM */
 758                 if (unlikely(boundary))
 759                         this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2);
 760                 ONENAND_SET_NEXT_BUFFERRAM(this);
 761                 buf += thislen;
 762                 thislen = min_t(int, mtd->writesize, len - read);
 763                 column = 0;
 764                 cond_resched();
 765                 /* Now wait for load */
 766                 ret = this->wait(mtd, FL_READING);
 767                 onenand_update_bufferram(mtd, from, !ret);
 768         }
 769
 770         /* Deselect and wake up anyone waiting on the device */
 771         onenand_release_device(mtd);
 772
 773         /*
 774          * Return success, if no ECC failures, else -EBADMSG
 775          * fs driver will take care of that, because
 776          * retlen == desired len and result == -EBADMSG
 777          */
 778         *retlen = read;
 779
 780         if (mtd->ecc_stats.failed - stats.failed)
 781                 return -EBADMSG;
 782
 783         if (ret)
 784                 return ret;
 785
 786         return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
 787 }
 788
 789 /**
 790  * onenand_do_read_oob - [MTD Interface] OneNAND read out-of-band
 791  * @param mtd           MTD device structure
 792  * @param from          offset to read from
 793  * @param len           number of bytes to read
 794  * @param retlen        pointer to variable to store the number of read bytes
 795  * @param buf           the databuffer to put data
 796  *
 797  * OneNAND read out-of-band data from the spare area
 798  */
 799 int onenand_do_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
 800                         size_t *retlen, u_char *buf)
 801 {
 802         struct onenand_chip *this = mtd->priv;
 803         int read = 0, thislen, column;
 804         int ret = 0;
 805
 806         DEBUG(MTD_DEBUG_LEVEL3, "onenand_read_oob: from = 0x%08x, len = %i\n", (unsigned int) from, (int) len);
 807
 808         /* Initialize return length value */
 809         *retlen = 0;
 810
 811         /* Do not allow reads past end of device */
 812         if (unlikely((from + len) > mtd->size)) {
 813                 DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_oob: Attempt read beyond end of device\n");
 814                 return -EINVAL;
 815         }
 816
 817         /* Grab the lock and see if the device is available */
 818         onenand_get_device(mtd, FL_READING);
 819
 820         column = from & (mtd->oobsize - 1);
 821
 822         while (read < len) {
 823                 cond_resched();
 824
 825                 thislen = mtd->oobsize - column;
 826                 thislen = min_t(int, thislen, len);
 827
 828                 this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize);
 829
 830                 onenand_update_bufferram(mtd, from, 0);
 831
 832                 ret = this->wait(mtd, FL_READING);
 833                 /* First copy data and check return value for ECC handling */
 834
 835                 this->read_bufferram(mtd, ONENAND_SPARERAM, buf, column, thislen);
 836
 837                 if (ret) {
 838                         DEBUG(MTD_DEBUG_LEVEL0, "onenand_read_oob: read failed = 0x%x\n", ret);
 839                         goto out;
 840                 }
 841
 842                 read += thislen;
 843
 844                 if (read == len)
 845                         break;
 846
 847                 buf += thislen;
 848
 849                 /* Read more? */
 850                 if (read < len) {
 851                         /* Page size */
 852                         from += mtd->writesize;
 853                         column = 0;
 854                 }
 855         }
 856
 857 out:
 858         /* Deselect and wake up anyone waiting on the device */
 859         onenand_release_device(mtd);
 860
 861         *retlen = read;
 862         return ret;
 863 }
 864
 865 /**
 866  * onenand_read_oob - [MTD Interface] NAND write data and/or out-of-band
 867  * @mtd:        MTD device structure
 868  * @from:       offset to read from
 869  * @ops:        oob operation description structure
 870  */
 871 static int onenand_read_oob(struct mtd_info *mtd, loff_t from,
 872                             struct mtd_oob_ops *ops)
 873 {
 874         BUG_ON(ops->mode != MTD_OOB_PLACE);
 875
 876         return onenand_do_read_oob(mtd, from + ops->ooboffs, ops->ooblen,
 877                                    &ops->oobretlen, ops->oobbuf);
 878 }
 879
 880 #ifdef CONFIG_MTD_ONENAND_VERIFY_WRITE
 881 /**
 882  * onenand_verify_oob - [GENERIC] verify the oob contents after a write
 883  * @param mtd           MTD device structure
 884  * @param buf           the databuffer to verify
 885  * @param to            offset to read from
 886  * @param len           number of bytes to read and compare
 887  *
 888  */
 889 static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to, int len)
 890 {
 891         struct onenand_chip *this = mtd->priv;
 892         char *readp = this->page_buf;
 893         int column = to & (mtd->oobsize - 1);
 894         int status, i;
 895
 896         this->command(mtd, ONENAND_CMD_READOOB, to, mtd->oobsize);
 897         onenand_update_bufferram(mtd, to, 0);
 898         status = this->wait(mtd, FL_READING);
 899         if (status)
 900                 return status;
 901
 902         this->read_bufferram(mtd, ONENAND_SPARERAM, readp, column, len);
 903
 904         for(i = 0; i < len; i++)
 905                 if (buf[i] != 0xFF && buf[i] != readp[i])
 906                         return -EBADMSG;
 907
 908         return 0;
 909 }
 910
 911 /**
 912  * onenand_verify_page - [GENERIC] verify the chip contents after a write
 913  * @param mtd           MTD device structure
 914  * @param buf           the databuffer to verify
 915  *
 916  * Check DataRAM area directly
 917  */
 918 static int onenand_verify_page(struct mtd_info *mtd, u_char *buf, loff_t addr)
 919 {
 920         struct onenand_chip *this = mtd->priv;
 921         void __iomem *dataram0, *dataram1;
 922         int ret = 0;
 923
 924         /* In partial page write, just skip it */
 925         if ((addr & (mtd->writesize - 1)) != 0)
 926                 return 0;
 927
 928         this->command(mtd, ONENAND_CMD_READ, addr, mtd->writesize);
 929
 930         ret = this->wait(mtd, FL_READING);
 931         if (ret)
 932                 return ret;
 933
 934         onenand_update_bufferram(mtd, addr, 1);
 935
 936         /* Check, if the two dataram areas are same */
 937         dataram0 = this->base + ONENAND_DATARAM;
 938         dataram1 = dataram0 + mtd->writesize;
 939
 940         if (memcmp(dataram0, dataram1, mtd->writesize))
 941                 return -EBADMSG;
 942
 943         return 0;
 944 }
 945 #else
 946 #define onenand_verify_page(...)        (0)
 947 #define onenand_verify_oob(...)         (0)
 948 #endif
 949
 950 #define NOTALIGNED(x)   ((x & (this->subpagesize - 1)) != 0)
 951
 952 /**
 953  * onenand_write - [MTD Interface] write buffer to FLASH
 954  * @param mtd           MTD device structure
 955  * @param to            offset to write to
 956  * @param len           number of bytes to write
 957  * @param retlen        pointer to variable to store the number of written bytes
 958  * @param buf           the data to write
 959  *
 960  * Write with ECC
 961  */
 962 static int onenand_write(struct mtd_info *mtd, loff_t to, size_t len,
 963         size_t *retlen, const u_char *buf)
 964 {
 965         struct onenand_chip *this = mtd->priv;
 966         int written = 0;
 967         int ret = 0;
 968         int column, subpage;
 969
 970         DEBUG(MTD_DEBUG_LEVEL3, "onenand_write: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
 971
 972         /* Initialize retlen, in case of early exit */
 973         *retlen = 0;
 974
 975         /* Do not allow writes past end of device */
 976         if (unlikely((to + len) > mtd->size)) {
 977                 DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: Attempt write to past end of device\n");
 978                 return -EINVAL;
 979         }
 980
 981         /* Reject writes, which are not page aligned */
 982         if (unlikely(NOTALIGNED(to)) || unlikely(NOTALIGNED(len))) {
 983                 DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: Attempt to write not page aligned data\n");
 984                 return -EINVAL;
 985         }
 986
 987         column = to & (mtd->writesize - 1);
 988         subpage = column || (len & (mtd->writesize - 1));
 989
 990         /* Grab the lock and see if the device is available */
 991         onenand_get_device(mtd, FL_WRITING);
 992
 993         /* Loop until all data write */
 994         while (written < len) {
 995                 int bytes = mtd->writesize;
 996                 int thislen = min_t(int, bytes, len - written);
 997                 u_char *wbuf = (u_char *) buf;
 998
 999                 cond_resched();
1000
1001                 this->command(mtd, ONENAND_CMD_BUFFERRAM, to, bytes);
1002
1003                 /* Partial page write */
1004                 if (subpage) {
1005                         bytes = min_t(int, bytes - column, (int) len);
1006                         memset(this->page_buf, 0xff, mtd->writesize);
1007                         memcpy(this->page_buf + column, buf, bytes);
1008                         wbuf = this->page_buf;
1009                         /* Even though partial write, we need page size */
1010                         thislen = mtd->writesize;
1011                 }
1012
1013                 this->write_bufferram(mtd, ONENAND_DATARAM, wbuf, 0, thislen);
1014                 this->write_bufferram(mtd, ONENAND_SPARERAM, ffchars, 0, mtd->oobsize);
1015
1016                 this->command(mtd, ONENAND_CMD_PROG, to, mtd->writesize);
1017
1018                 /* In partial page write we don't update bufferram */
1019                 onenand_update_bufferram(mtd, to, !subpage);
1020
1021                 ret = this->wait(mtd, FL_WRITING);
1022                 if (ret) {
1023                         DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: write filaed %d\n", ret);
1024                         break;
1025                 }
1026
1027                 /* Only check verify write turn on */
1028                 ret = onenand_verify_page(mtd, (u_char *) wbuf, to);
1029                 if (ret) {
1030                         DEBUG(MTD_DEBUG_LEVEL0, "onenand_write: verify failed %d\n", ret);
1031                         break;
1032                 }
1033
1034                 written += thislen;
1035
1036                 if (written == len)
1037                         break;
1038
1039                 column = 0;
1040                 to += thislen;
1041                 buf += thislen;
1042         }
1043
1044         /* Deselect and wake up anyone waiting on the device */
1045         onenand_release_device(mtd);
1046
1047         *retlen = written;
1048
1049         return ret;
1050 }
1051
1052 /**
1053  * onenand_do_write_oob - [Internal] OneNAND write out-of-band
1054  * @param mtd           MTD device structure
1055  * @param to            offset to write to
1056  * @param len           number of bytes to write
1057  * @param retlen        pointer to variable to store the number of written bytes
1058  * @param buf           the data to write
1059  *
1060  * OneNAND write out-of-band
1061  */
1062 static int onenand_do_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
1063                                 size_t *retlen, const u_char *buf)
1064 {
1065         struct onenand_chip *this = mtd->priv;
1066         int column, ret = 0;
1067         int written = 0;
1068
1069         DEBUG(MTD_DEBUG_LEVEL3, "onenand_write_oob: to = 0x%08x, len = %i\n", (unsigned int) to, (int) len);
1070
1071         /* Initialize retlen, in case of early exit */
1072         *retlen = 0;
1073
1074         /* Do not allow writes past end of device */
1075         if (unlikely((to + len) > mtd->size)) {
1076                 DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: Attempt write to past end of device\n");
1077                 return -EINVAL;
1078         }
1079
1080         /* Grab the lock and see if the device is available */
1081         onenand_get_device(mtd, FL_WRITING);
1082
1083         /* Loop until all data write */
1084         while (written < len) {
1085                 int thislen = min_t(int, mtd->oobsize, len - written);
1086
1087                 cond_resched();
1088
1089                 column = to & (mtd->oobsize - 1);
1090
1091                 this->command(mtd, ONENAND_CMD_BUFFERRAM, to, mtd->oobsize);
1092
1093                 /* We send data to spare ram with oobsize
1094                  * to prevent byte access */
1095                 memset(this->page_buf, 0xff, mtd->oobsize);
1096                 memcpy(this->page_buf + column, buf, thislen);
1097                 this->write_bufferram(mtd, ONENAND_SPARERAM, this->page_buf, 0, mtd->oobsize);
1098
1099                 this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize);
1100
1101                 onenand_update_bufferram(mtd, to, 0);
1102
1103                 ret = this->wait(mtd, FL_WRITING);
1104                 if (ret) {
1105                         DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: write filaed %d\n", ret);
1106                         goto out;
1107                 }
1108
1109                 ret = onenand_verify_oob(mtd, buf, to, thislen);
1110                 if (ret) {
1111                         DEBUG(MTD_DEBUG_LEVEL0, "onenand_write_oob: verify failed %d\n", ret);
1112                         goto out;
1113                 }
1114
1115                 written += thislen;
1116
1117                 if (written == len)
1118                         break;
1119
1120                 to += thislen;
1121                 buf += thislen;
1122         }
1123
1124 out:
1125         /* Deselect and wake up anyone waiting on the device */
1126         onenand_release_device(mtd);
1127
1128         *retlen = written;
1129
1130         return ret;
1131 }
1132
1133 /**
1134  * onenand_write_oob - [MTD Interface] NAND write data and/or out-of-band
1135  * @mtd:        MTD device structure
1136  * @from:       offset to read from
1137  * @ops:        oob operation description structure
1138  */
1139 static int onenand_write_oob(struct mtd_info *mtd, loff_t to,
1140                              struct mtd_oob_ops *ops)
1141 {
1142         BUG_ON(ops->mode != MTD_OOB_PLACE);
1143
1144         return onenand_do_write_oob(mtd, to + ops->ooboffs, ops->ooblen,
1145                                     &ops->oobretlen, ops->oobbuf);
1146 }
1147
1148 /**
1149  * onenand_block_checkbad - [GENERIC] Check if a block is marked bad
1150  * @param mtd           MTD device structure
1151  * @param ofs           offset from device start
1152  * @param getchip       0, if the chip is already selected
1153  * @param allowbbt      1, if its allowed to access the bbt area
1154  *
1155  * Check, if the block is bad. Either by reading the bad block table or
1156  * calling of the scan function.
1157  */
1158 static int onenand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt)
1159 {
1160         struct onenand_chip *this = mtd->priv;
1161         struct bbm_info *bbm = this->bbm;
1162
1163         /* Return info from the table */
1164         return bbm->isbad_bbt(mtd, ofs, allowbbt);
1165 }
1166
1167 /**
1168  * onenand_erase - [MTD Interface] erase block(s)
1169  * @param mtd           MTD device structure
1170  * @param instr         erase instruction
1171  *
1172  * Erase one ore more blocks
1173  */
1174 static int onenand_erase(struct mtd_info *mtd, struct erase_info *instr)
1175 {
1176         struct onenand_chip *this = mtd->priv;
1177         unsigned int block_size;
1178         loff_t addr;
1179         int len;
1180         int ret = 0;
1181
1182         DEBUG(MTD_DEBUG_LEVEL3, "onenand_erase: start = 0x%08x, len = %i\n", (unsigned int) instr->addr, (unsigned int) instr->len);
1183
1184         block_size = (1 << this->erase_shift);
1185
1186         /* Start address must align on block boundary */
1187         if (unlikely(instr->addr & (block_size - 1))) {
1188                 DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Unaligned address\n");
1189                 return -EINVAL;
1190         }
1191
1192         /* Length must align on block boundary */
1193         if (unlikely(instr->len & (block_size - 1))) {
1194                 DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Length not block aligned\n");
1195                 return -EINVAL;
1196         }
1197
1198         /* Do not allow erase past end of device */
1199         if (unlikely((instr->len + instr->addr) > mtd->size)) {
1200                 DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Erase past end of device\n");
1201                 return -EINVAL;
1202         }
1203
1204         instr->fail_addr = 0xffffffff;
1205
1206         /* Grab the lock and see if the device is available */
1207         onenand_get_device(mtd, FL_ERASING);
1208
1209         /* Loop throught the pages */
1210         len = instr->len;
1211         addr = instr->addr;
1212
1213         instr->state = MTD_ERASING;
1214
1215         while (len) {
1216                 cond_resched();
1217
1218                 /* Check if we have a bad block, we do not erase bad blocks */
1219                 if (onenand_block_checkbad(mtd, addr, 0, 0)) {
1220                         printk (KERN_WARNING "onenand_erase: attempt to erase a bad block at addr 0x%08x\n", (unsigned int) addr);
1221                         instr->state = MTD_ERASE_FAILED;
1222                         goto erase_exit;
1223                 }
1224
1225                 this->command(mtd, ONENAND_CMD_ERASE, addr, block_size);
1226
1227                 ret = this->wait(mtd, FL_ERASING);
1228                 /* Check, if it is write protected */
1229                 if (ret) {
1230                         DEBUG(MTD_DEBUG_LEVEL0, "onenand_erase: Failed erase, block %d\n", (unsigned) (addr >> this->erase_shift));
1231                         instr->state = MTD_ERASE_FAILED;
1232                         instr->fail_addr = addr;
1233                         goto erase_exit;
1234                 }
1235
1236                 len -= block_size;
1237                 addr += block_size;
1238         }
1239
1240         instr->state = MTD_ERASE_DONE;
1241
1242 erase_exit:
1243
1244         ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;
1245         /* Do call back function */
1246         if (!ret)
1247                 mtd_erase_callback(instr);
1248
1249         /* Deselect and wake up anyone waiting on the device */
1250         onenand_release_device(mtd);
1251
1252         return ret;
1253 }
1254
1255 /**
1256  * onenand_sync - [MTD Interface] sync
1257  * @param mtd           MTD device structure
1258  *
1259  * Sync is actually a wait for chip ready function
1260  */
1261 static void onenand_sync(struct mtd_info *mtd)
1262 {
1263         DEBUG(MTD_DEBUG_LEVEL3, "onenand_sync: called\n");
1264
1265         /* Grab the lock and see if the device is available */
1266         onenand_get_device(mtd, FL_SYNCING);
1267
1268         /* Release it and go back */
1269         onenand_release_device(mtd);
1270 }
1271
1272 /**
1273  * onenand_block_isbad - [MTD Interface] Check whether the block at the given offset is bad
1274  * @param mtd           MTD device structure
1275  * @param ofs           offset relative to mtd start
1276  *
1277  * Check whether the block is bad
1278  */
1279 static int onenand_block_isbad(struct mtd_info *mtd, loff_t ofs)
1280 {
1281         /* Check for invalid offset */
1282         if (ofs > mtd->size)
1283                 return -EINVAL;
1284
1285         return onenand_block_checkbad(mtd, ofs, 1, 0);
1286 }
1287
1288 /**
1289  * onenand_default_block_markbad - [DEFAULT] mark a block bad
1290  * @param mtd           MTD device structure
1291  * @param ofs           offset from device start
1292  *
1293  * This is the default implementation, which can be overridden by
1294  * a hardware specific driver.
1295  */
1296 static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
1297 {
1298         struct onenand_chip *this = mtd->priv;
1299         struct bbm_info *bbm = this->bbm;
1300         u_char buf[2] = {0, 0};
1301         size_t retlen;
1302         int block;
1303
1304         /* Get block number */
1305         block = ((int) ofs) >> bbm->bbt_erase_shift;
1306         if (bbm->bbt)
1307                 bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1);
1308
1309         /* We write two bytes, so we dont have to mess with 16 bit access */
1310         ofs += mtd->oobsize + (bbm->badblockpos & ~0x01);
1311         return onenand_do_write_oob(mtd, ofs , 2, &retlen, buf);
1312 }
1313
1314 /**
1315  * onenand_block_markbad - [MTD Interface] Mark the block at the given offset as bad
1316  * @param mtd           MTD device structure
1317  * @param ofs           offset relative to mtd start
1318  *
1319  * Mark the block as bad
1320  */
1321 static int onenand_block_markbad(struct mtd_info *mtd, loff_t ofs)
1322 {
1323         struct onenand_chip *this = mtd->priv;
1324         int ret;
1325
1326         ret = onenand_block_isbad(mtd, ofs);
1327         if (ret) {
1328                 /* If it was bad already, return success and do nothing */
1329                 if (ret > 0)
1330                         return 0;
1331                 return ret;
1332         }
1333
1334         return this->block_markbad(mtd, ofs);
1335 }
1336
1337 /**
1338  * onenand_do_lock_cmd - [OneNAND Interface] Lock or unlock block(s)
1339  * @param mtd           MTD device structure
1340  * @param ofs           offset relative to mtd start
1341  * @param len           number of bytes to lock or unlock
1342  *
1343  * Lock or unlock one or more blocks
1344  */
1345 static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int cmd)
1346 {
1347         struct onenand_chip *this = mtd->priv;
1348         int start, end, block, value, status;
1349         int wp_status_mask;
1350
1351         start = ofs >> this->erase_shift;
1352         end = len >> this->erase_shift;
1353
1354         if (cmd == ONENAND_CMD_LOCK)
1355                 wp_status_mask = ONENAND_WP_LS;
1356         else
1357                 wp_status_mask = ONENAND_WP_US;
1358
1359         /* Continuous lock scheme */
1360         if (this->options & ONENAND_HAS_CONT_LOCK) {
1361                 /* Set start block address */
1362                 this->write_word(start, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
1363                 /* Set end block address */
1364                 this->write_word(start + end - 1, this->base + ONENAND_REG_END_BLOCK_ADDRESS);
1365                 /* Write lock command */
1366                 this->command(mtd, cmd, 0, 0);
1367
1368                 /* There's no return value */
1369                 this->wait(mtd, FL_LOCKING);
1370
1371                 /* Sanity check */
1372                 while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
1373                     & ONENAND_CTRL_ONGO)
1374                         continue;
1375
1376                 /* Check lock status */
1377                 status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
1378                 if (!(status & wp_status_mask))
1379                         printk(KERN_ERR "wp status = 0x%x\n", status);
1380
1381                 return 0;
1382         }
1383
1384         /* Block lock scheme */
1385         for (block = start; block < start + end; block++) {
1386                 /* Set block address */
1387                 value = onenand_block_address(this, block);
1388                 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
1389                 /* Select DataRAM for DDP */
1390                 value = onenand_bufferram_address(this, block);
1391                 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
1392                 /* Set start block address */
1393                 this->write_word(block, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
1394                 /* Write lock command */
1395                 this->command(mtd, cmd, 0, 0);
1396
1397                 /* There's no return value */
1398                 this->wait(mtd, FL_LOCKING);
1399
1400                 /* Sanity check */
1401                 while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
1402                     & ONENAND_CTRL_ONGO)
1403                         continue;
1404
1405                 /* Check lock status */
1406                 status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
1407                 if (!(status & wp_status_mask))
1408                         printk(KERN_ERR "block = %d, wp status = 0x%x\n", block, status);
1409         }
1410
1411         return 0;
1412 }
1413
1414 /**
1415  * onenand_lock - [MTD Interface] Lock block(s)
1416  * @param mtd           MTD device structure
1417  * @param ofs           offset relative to mtd start
1418  * @param len           number of bytes to unlock
1419  *
1420  * Lock one or more blocks
1421  */
1422 static int onenand_lock(struct mtd_info *mtd, loff_t ofs, size_t len)
1423 {
1424         return onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_LOCK);
1425 }
1426
1427 /**
1428  * onenand_unlock - [MTD Interface] Unlock block(s)
1429  * @param mtd           MTD device structure
1430  * @param ofs           offset relative to mtd start
1431  * @param len           number of bytes to unlock
1432  *
1433  * Unlock one or more blocks
1434  */
1435 static int onenand_unlock(struct mtd_info *mtd, loff_t ofs, size_t len)
1436 {
1437         return onenand_do_lock_cmd(mtd, ofs, len, ONENAND_CMD_UNLOCK);
1438 }
1439
1440 /**
1441  * onenand_check_lock_status - [OneNAND Interface] Check lock status
1442  * @param this          onenand chip data structure
1443  *
1444  * Check lock status
1445  */
1446 static void onenand_check_lock_status(struct onenand_chip *this)
1447 {
1448         unsigned int value, block, status;
1449         unsigned int end;
1450
1451         end = this->chipsize >> this->erase_shift;
1452         for (block = 0; block < end; block++) {
1453                 /* Set block address */
1454                 value = onenand_block_address(this, block);
1455                 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1);
1456                 /* Select DataRAM for DDP */
1457                 value = onenand_bufferram_address(this, block);
1458                 this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2);
1459                 /* Set start block address */
1460                 this->write_word(block, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
1461
1462                 /* Check lock status */
1463                 status = this->read_word(this->base + ONENAND_REG_WP_STATUS);
1464                 if (!(status & ONENAND_WP_US))
1465                         printk(KERN_ERR "block = %d, wp status = 0x%x\n", block, status);
1466         }
1467 }
1468
1469 /**
1470  * onenand_unlock_all - [OneNAND Interface] unlock all blocks
1471  * @param mtd           MTD device structure
1472  *
1473  * Unlock all blocks
1474  */
1475 static int onenand_unlock_all(struct mtd_info *mtd)
1476 {
1477         struct onenand_chip *this = mtd->priv;
1478
1479         if (this->options & ONENAND_HAS_UNLOCK_ALL) {
1480                 /* Set start block address */
1481                 this->write_word(0, this->base + ONENAND_REG_START_BLOCK_ADDRESS);
1482                 /* Write unlock command */
1483                 this->command(mtd, ONENAND_CMD_UNLOCK_ALL, 0, 0);
1484
1485                 /* There's no return value */
1486                 this->wait(mtd, FL_LOCKING);
1487
1488                 /* Sanity check */
1489                 while (this->read_word(this->base + ONENAND_REG_CTRL_STATUS)
1490                     & ONENAND_CTRL_ONGO)
1491                         continue;
1492
1493                 /* Workaround for all block unlock in DDP */
1494                 if (ONENAND_IS_DDP(this)) {
1495                         /* 1st block on another chip */
1496                         loff_t ofs = this->chipsize >> 1;
1497                         size_t len = mtd->erasesize;
1498
1499                         onenand_unlock(mtd, ofs, len);
1500                 }
1501
1502                 onenand_check_lock_status(this);
1503
1504                 return 0;
1505         }
1506
1507         onenand_unlock(mtd, 0x0, this->chipsize);
1508
1509         return 0;
1510 }
1511
1512 #ifdef CONFIG_MTD_ONENAND_OTP
1513
1514 /* Interal OTP operation */
1515 typedef int (*otp_op_t)(struct mtd_info *mtd, loff_t form, size_t len,
1516                 size_t *retlen, u_char *buf);
1517
1518 /**
1519  * do_otp_read - [DEFAULT] Read OTP block area
1520  * @param mtd           MTD device structure
1521  * @param from          The offset to read
1522  * @param len           number of bytes to read
1523  * @param retlen        pointer to variable to store the number of readbytes
1524  * @param buf           the databuffer to put/get data
1525  *
1526  * Read OTP block area.
1527  */
1528 static int do_otp_read(struct mtd_info *mtd, loff_t from, size_t len,
1529                 size_t *retlen, u_char *buf)
1530 {
1531         struct onenand_chip *this = mtd->priv;
1532         int ret;
1533
1534         /* Enter OTP access mode */
1535         this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
1536         this->wait(mtd, FL_OTPING);
1537
1538         ret = mtd->read(mtd, from, len, retlen, buf);
1539
1540         /* Exit OTP access mode */
1541         this->command(mtd, ONENAND_CMD_RESET, 0, 0);
1542         this->wait(mtd, FL_RESETING);
1543
1544         return ret;
1545 }
1546
1547 /**
1548  * do_otp_write - [DEFAULT] Write OTP block area
1549  * @param mtd           MTD device structure
1550  * @param from          The offset to write
1551  * @param len           number of bytes to write
1552  * @param retlen        pointer to variable to store the number of write bytes
1553  * @param buf           the databuffer to put/get data
1554  *
1555  * Write OTP block area.
1556  */
1557 static int do_otp_write(struct mtd_info *mtd, loff_t from, size_t len,
1558                 size_t *retlen, u_char *buf)
1559 {
1560         struct onenand_chip *this = mtd->priv;
1561         unsigned char *pbuf = buf;
1562         int ret;
1563
1564         /* Force buffer page aligned */
1565         if (len < mtd->writesize) {
1566                 memcpy(this->page_buf, buf, len);
1567                 memset(this->page_buf + len, 0xff, mtd->writesize - len);
1568                 pbuf = this->page_buf;
1569                 len = mtd->writesize;
1570         }
1571
1572         /* Enter OTP access mode */
1573         this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
1574         this->wait(mtd, FL_OTPING);
1575
1576         ret = mtd->write(mtd, from, len, retlen, pbuf);
1577
1578         /* Exit OTP access mode */
1579         this->command(mtd, ONENAND_CMD_RESET, 0, 0);
1580         this->wait(mtd, FL_RESETING);
1581
1582         return ret;
1583 }
1584
1585 /**
1586  * do_otp_lock - [DEFAULT] Lock OTP block area
1587  * @param mtd           MTD device structure
1588  * @param from          The offset to lock
1589  * @param len           number of bytes to lock
1590  * @param retlen        pointer to variable to store the number of lock bytes
1591  * @param buf           the databuffer to put/get data
1592  *
1593  * Lock OTP block area.
1594  */
1595 static int do_otp_lock(struct mtd_info *mtd, loff_t from, size_t len,
1596                 size_t *retlen, u_char *buf)
1597 {
1598         struct onenand_chip *this = mtd->priv;
1599         int ret;
1600
1601         /* Enter OTP access mode */
1602         this->command(mtd, ONENAND_CMD_OTP_ACCESS, 0, 0);
1603         this->wait(mtd, FL_OTPING);
1604
1605         ret = onenand_do_write_oob(mtd, from, len, retlen, buf);
1606
1607         /* Exit OTP access mode */
1608         this->command(mtd, ONENAND_CMD_RESET, 0, 0);
1609         this->wait(mtd, FL_RESETING);
1610
1611         return ret;
1612 }
1613
1614 /**
1615  * onenand_otp_walk - [DEFAULT] Handle OTP operation
1616  * @param mtd           MTD device structure
1617  * @param from          The offset to read/write
1618  * @param len           number of bytes to read/write
1619  * @param retlen        pointer to variable to store the number of read bytes
1620  * @param buf           the databuffer to put/get data
1621  * @param action        do given action
1622  * @param mode          specify user and factory
1623  *
1624  * Handle OTP operation.
1625  */
1626 static int onenand_otp_walk(struct mtd_info *mtd, loff_t from, size_t len,
1627                         size_t *retlen, u_char *buf,
1628                         otp_op_t action, int mode)
1629 {
1630         struct onenand_chip *this = mtd->priv;
1631         int otp_pages;
1632         int density;
1633         int ret = 0;
1634
1635         *retlen = 0;
1636
1637         density = this->device_id >> ONENAND_DEVICE_DENSITY_SHIFT;
1638         if (density < ONENAND_DEVICE_DENSITY_512Mb)
1639                 otp_pages = 20;
1640         else
1641                 otp_pages = 10;
1642
1643         if (mode == MTD_OTP_FACTORY) {
1644                 from += mtd->writesize * otp_pages;
1645                 otp_pages = 64 - otp_pages;
1646         }
1647
1648         /* Check User/Factory boundary */
1649         if (((mtd->writesize * otp_pages) - (from + len)) < 0)
1650                 return 0;
1651
1652         while (len > 0 && otp_pages > 0) {
1653                 if (!action) {  /* OTP Info functions */
1654                         struct otp_info *otpinfo;
1655
1656                         len -= sizeof(struct otp_info);
1657                         if (len <= 0)
1658                                 return -ENOSPC;
1659
1660                         otpinfo = (struct otp_info *) buf;
1661                         otpinfo->start = from;
1662                         otpinfo->length = mtd->writesize;
1663                         otpinfo->locked = 0;
1664
1665                         from += mtd->writesize;
1666                         buf += sizeof(struct otp_info);
1667                         *retlen += sizeof(struct otp_info);
1668                 } else {
1669                         size_t tmp_retlen;
1670                         int size = len;
1671
1672                         ret = action(mtd, from, len, &tmp_retlen, buf);
1673
1674                         buf += size;
1675                         len -= size;
1676                         *retlen += size;
1677
1678                         if (ret < 0)
1679                                 return ret;
1680                 }
1681                 otp_pages--;
1682         }
1683
1684         return 0;
1685 }
1686
1687 /**
1688  * onenand_get_fact_prot_info - [MTD Interface] Read factory OTP info
1689  * @param mtd           MTD device structure
1690  * @param buf           the databuffer to put/get data
1691  * @param len           number of bytes to read
1692  *
1693  * Read factory OTP info.
1694  */
1695 static int onenand_get_fact_prot_info(struct mtd_info *mtd,
1696                         struct otp_info *buf, size_t len)
1697 {
1698         size_t retlen;
1699         int ret;
1700
1701         ret = onenand_otp_walk(mtd, 0, len, &retlen, (u_char *) buf, NULL, MTD_OTP_FACTORY);
1702
1703         return ret ? : retlen;
1704 }
1705
1706 /**
1707  * onenand_read_fact_prot_reg - [MTD Interface] Read factory OTP area
1708  * @param mtd           MTD device structure
1709  * @param from          The offset to read
1710  * @param len           number of bytes to read
1711  * @param retlen        pointer to variable to store the number of read bytes
1712  * @param buf           the databuffer to put/get data
1713  *
1714  * Read factory OTP area.
1715  */
1716 static int onenand_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
1717                         size_t len, size_t *retlen, u_char *buf)
1718 {
1719         return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_read, MTD_OTP_FACTORY);
1720 }
1721
1722 /**
1723  * onenand_get_user_prot_info - [MTD Interface] Read user OTP info
1724  * @param mtd           MTD device structure
1725  * @param buf           the databuffer to put/get data
1726  * @param len           number of bytes to read
1727  *
1728  * Read user OTP info.
1729  */
1730 static int onenand_get_user_prot_info(struct mtd_info *mtd,
1731                         struct otp_info *buf, size_t len)
1732 {
1733         size_t retlen;
1734         int ret;
1735
1736         ret = onenand_otp_walk(mtd, 0, len, &retlen, (u_char *) buf, NULL, MTD_OTP_USER);
1737
1738         return ret ? : retlen;
1739 }
1740
1741 /**
1742  * onenand_read_user_prot_reg - [MTD Interface] Read user OTP area
1743  * @param mtd           MTD device structure
1744  * @param from          The offset to read
1745  * @param len           number of bytes to read
1746  * @param retlen        pointer to variable to store the number of read bytes
1747  * @param buf           the databuffer to put/get data
1748  *
1749  * Read user OTP area.
1750  */
1751 static int onenand_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
1752                         size_t len, size_t *retlen, u_char *buf)
1753 {
1754         return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_read, MTD_OTP_USER);
1755 }
1756
1757 /**
1758  * onenand_write_user_prot_reg - [MTD Interface] Write user OTP area
1759  * @param mtd           MTD device structure
1760  * @param from          The offset to write
1761  * @param len           number of bytes to write
1762  * @param retlen        pointer to variable to store the number of write bytes
1763  * @param buf           the databuffer to put/get data
1764  *
1765  * Write user OTP area.
1766  */
1767 static int onenand_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
1768                         size_t len, size_t *retlen, u_char *buf)
1769 {
1770         return onenand_otp_walk(mtd, from, len, retlen, buf, do_otp_write, MTD_OTP_USER);
1771 }
1772
1773 /**
1774  * onenand_lock_user_prot_reg - [MTD Interface] Lock user OTP area
1775  * @param mtd           MTD device structure
1776  * @param from          The offset to lock
1777  * @param len           number of bytes to unlock
1778  *
1779  * Write lock mark on spare area in page 0 in OTP block
1780  */
1781 static int onenand_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
1782                         size_t len)
1783 {
1784         unsigned char oob_buf[64];
1785         size_t retlen;
1786         int ret;
1787
1788         memset(oob_buf, 0xff, mtd->oobsize);
1789         /*
1790          * Note: OTP lock operation
1791          *       OTP block : 0xXXFC
1792          *       1st block : 0xXXF3 (If chip support)
1793          *       Both      : 0xXXF0 (If chip support)
1794          */
1795         oob_buf[ONENAND_OTP_LOCK_OFFSET] = 0xFC;
1796
1797         /*
1798          * Write lock mark to 8th word of sector0 of page0 of the spare0.
1799          * We write 16 bytes spare area instead of 2 bytes.
1800          */
1801         from = 0;
1802         len = 16;
1803
1804         ret = onenand_otp_walk(mtd, from, len, &retlen, oob_buf, do_otp_lock, MTD_OTP_USER);
1805
1806         return ret ? : retlen;
1807 }
1808 #endif  /* CONFIG_MTD_ONENAND_OTP */
1809
1810 /**
1811  * onenand_check_features - Check and set OneNAND features
1812  * @param mtd           MTD data structure
1813  *
1814  * Check and set OneNAND features
1815  * - lock scheme
1816  */
1817 static void onenand_check_features(struct mtd_info *mtd)
1818 {
1819         struct onenand_chip *this = mtd->priv;
1820         unsigned int density, process;
1821
1822         /* Lock scheme depends on density and process */
1823         density = this->device_id >> ONENAND_DEVICE_DENSITY_SHIFT;
1824         process = this->version_id >> ONENAND_VERSION_PROCESS_SHIFT;
1825
1826         /* Lock scheme */
1827         if (density >= ONENAND_DEVICE_DENSITY_1Gb) {
1828                 /* A-Die has all block unlock */
1829                 if (process) {
1830                         printk(KERN_DEBUG "Chip support all block unlock\n");
1831                         this->options |= ONENAND_HAS_UNLOCK_ALL;
1832                 }
1833         } else {
1834                 /* Some OneNAND has continues lock scheme */
1835                 if (!process) {
1836                         printk(KERN_DEBUG "Lock scheme is Continues Lock\n");
1837                         this->options |= ONENAND_HAS_CONT_LOCK;
1838                 }
1839         }
1840 }
1841
1842 /**
1843  * onenand_print_device_info - Print device ID
1844  * @param device        device ID
1845  *
1846  * Print device ID
1847  */
1848 static void onenand_print_device_info(int device, int version)
1849 {
1850         int vcc, demuxed, ddp, density;
1851
1852         vcc = device & ONENAND_DEVICE_VCC_MASK;
1853         demuxed = device & ONENAND_DEVICE_IS_DEMUX;
1854         ddp = device & ONENAND_DEVICE_IS_DDP;
1855         density = device >> ONENAND_DEVICE_DENSITY_SHIFT;
1856         printk(KERN_INFO "%sOneNAND%s %dMB %sV 16-bit (0x%02x)\n",
1857                 demuxed ? "" : "Muxed ",
1858                 ddp ? "(DDP)" : "",
1859                 (16 << density),
1860                 vcc ? "2.65/3.3" : "1.8",
1861                 device);
1862         printk(KERN_DEBUG "OneNAND version = 0x%04x\n", version);
1863 }
1864
1865 static const struct onenand_manufacturers onenand_manuf_ids[] = {
1866         {ONENAND_MFR_SAMSUNG, "Samsung"},
1867 };
1868
1869 /**
1870  * onenand_check_maf - Check manufacturer ID
1871  * @param manuf         manufacturer ID
1872  *
1873  * Check manufacturer ID
1874  */
1875 static int onenand_check_maf(int manuf)
1876 {
1877         int size = ARRAY_SIZE(onenand_manuf_ids);
1878         char *name;
1879         int i;
1880
1881         for (i = 0; i < size; i++)
1882                 if (manuf == onenand_manuf_ids[i].id)
1883                         break;
1884
1885         if (i < size)
1886                 name = onenand_manuf_ids[i].name;
1887         else
1888                 name = "Unknown";
1889
1890         printk(KERN_DEBUG "OneNAND Manufacturer: %s (0x%0x)\n", name, manuf);
1891
1892         return (i == size);
1893 }
1894
1895 /**
1896  * onenand_probe - [OneNAND Interface] Probe the OneNAND device
1897  * @param mtd           MTD device structure
1898  *
1899  * OneNAND detection method:
1900  *   Compare the the values from command with ones from register
1901  */
1902 static int onenand_probe(struct mtd_info *mtd)
1903 {
1904         struct onenand_chip *this = mtd->priv;
1905         int bram_maf_id, bram_dev_id, maf_id, dev_id, ver_id;
1906         int density;
1907         int syscfg;
1908
1909         /* Save system configuration 1 */
1910         syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
1911         /* Clear Sync. Burst Read mode to read BootRAM */
1912         this->write_word((syscfg & ~ONENAND_SYS_CFG1_SYNC_READ), this->base + ONENAND_REG_SYS_CFG1);
1913
1914         /* Send the command for reading device ID from BootRAM */
1915         this->write_word(ONENAND_CMD_READID, this->base + ONENAND_BOOTRAM);
1916
1917         /* Read manufacturer and device IDs from BootRAM */
1918         bram_maf_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x0);
1919         bram_dev_id = this->read_word(this->base + ONENAND_BOOTRAM + 0x2);
1920
1921         /* Reset OneNAND to read default register values */
1922         this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_BOOTRAM);
1923         /* Wait reset */
1924         this->wait(mtd, FL_RESETING);
1925
1926         /* Restore system configuration 1 */
1927         this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1);
1928
1929         /* Check manufacturer ID */
1930         if (onenand_check_maf(bram_maf_id))
1931                 return -ENXIO;
1932
1933         /* Read manufacturer and device IDs from Register */
1934         maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID);
1935         dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID);
1936         ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID);
1937
1938         /* Check OneNAND device */
1939         if (maf_id != bram_maf_id || dev_id != bram_dev_id)
1940                 return -ENXIO;
1941
1942         /* Flash device information */
1943         onenand_print_device_info(dev_id, ver_id);
1944         this->device_id = dev_id;
1945         this->version_id = ver_id;
1946
1947         density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT;
1948         this->chipsize = (16 << density) << 20;
1949         /* Set density mask. it is used for DDP */
1950         if (ONENAND_IS_DDP(this))
1951                 this->density_mask = (1 << (density + 6));
1952         else
1953                 this->density_mask = 0;
1954
1955         /* OneNAND page size & block size */
1956         /* The data buffer size is equal to page size */
1957         mtd->writesize = this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE);
1958         mtd->oobsize = mtd->writesize >> 5;
1959         /* Pagers per block is always 64 in OneNAND */
1960         mtd->erasesize = mtd->writesize << 6;
1961
1962         this->erase_shift = ffs(mtd->erasesize) - 1;
1963         this->page_shift = ffs(mtd->writesize) - 1;
1964         this->ppb_shift = (this->erase_shift - this->page_shift);
1965         this->page_mask = (mtd->erasesize / mtd->writesize) - 1;
1966
1967         /* REVIST: Multichip handling */
1968
1969         mtd->size = this->chipsize;
1970
1971         /* Check OneNAND features */
1972         onenand_check_features(mtd);
1973
1974         return 0;
1975 }
1976
1977 /**
1978  * onenand_suspend - [MTD Interface] Suspend the OneNAND flash
1979  * @param mtd           MTD device structure
1980  */
1981 static int onenand_suspend(struct mtd_info *mtd)
1982 {
1983         return onenand_get_device(mtd, FL_PM_SUSPENDED);
1984 }
1985
1986 /**
1987  * onenand_resume - [MTD Interface] Resume the OneNAND flash
1988  * @param mtd           MTD device structure
1989  */
1990 static void onenand_resume(struct mtd_info *mtd)
1991 {
1992         struct onenand_chip *this = mtd->priv;
1993
1994         if (this->state == FL_PM_SUSPENDED)
1995                 onenand_release_device(mtd);
1996         else
1997                 printk(KERN_ERR "resume() called for the chip which is not"
1998                                 "in suspended state\n");
1999 }
2000
2001 /**
2002  * onenand_scan - [OneNAND Interface] Scan for the OneNAND device
2003  * @param mtd           MTD device structure
2004  * @param maxchips      Number of chips to scan for
2005  *
2006  * This fills out all the not initialized function pointers
2007  * with the defaults.
2008  * The flash ID is read and the mtd/chip structures are
2009  * filled with the appropriate values.
2010  */
2011 int onenand_scan(struct mtd_info *mtd, int maxchips)
2012 {
2013         struct onenand_chip *this = mtd->priv;
2014
2015         if (!this->read_word)
2016                 this->read_word = onenand_readw;
2017         if (!this->write_word)
2018                 this->write_word = onenand_writew;
2019
2020         if (!this->command)
2021                 this->command = onenand_command;
2022         if (!this->wait)
2023                 onenand_setup_wait(mtd);
2024
2025         if (!this->read_bufferram)
2026                 this->read_bufferram = onenand_read_bufferram;
2027         if (!this->write_bufferram)
2028                 this->write_bufferram = onenand_write_bufferram;
2029
2030         if (!this->block_markbad)
2031                 this->block_markbad = onenand_default_block_markbad;
2032         if (!this->scan_bbt)
2033                 this->scan_bbt = onenand_default_bbt;
2034
2035         if (onenand_probe(mtd))
2036                 return -ENXIO;
2037
2038         /* Set Sync. Burst Read after probing */
2039         if (this->mmcontrol) {
2040                 printk(KERN_INFO "OneNAND Sync. Burst Read support\n");
2041                 this->read_bufferram = onenand_sync_read_bufferram;
2042         }
2043
2044         /* Allocate buffers, if necessary */
2045         if (!this->page_buf) {
2046                 size_t len;
2047                 len = mtd->writesize + mtd->oobsize;
2048                 this->page_buf = kmalloc(len, GFP_KERNEL);
2049                 if (!this->page_buf) {
2050                         printk(KERN_ERR "onenand_scan(): Can't allocate page_buf\n");
2051                         return -ENOMEM;
2052                 }
2053                 this->options |= ONENAND_PAGEBUF_ALLOC;
2054         }
2055
2056         this->state = FL_READY;
2057         init_waitqueue_head(&this->wq);
2058         spin_lock_init(&this->chip_lock);
2059
2060         /*
2061          * Allow subpage writes up to oobsize.
2062          */
2063         switch (mtd->oobsize) {
2064         case 64:
2065                 this->ecclayout = &onenand_oob_64;
2066                 mtd->subpage_sft = 2;
2067                 break;
2068
2069         case 32:
2070                 this->ecclayout = &onenand_oob_32;
2071                 mtd->subpage_sft = 1;
2072                 break;
2073
2074         default:
2075                 printk(KERN_WARNING "No OOB scheme defined for oobsize %d\n",
2076                         mtd->oobsize);
2077                 mtd->subpage_sft = 0;
2078                 /* To prevent kernel oops */
2079                 this->ecclayout = &onenand_oob_32;
2080                 break;
2081         }
2082
2083         this->subpagesize = mtd->writesize >> mtd->subpage_sft;
2084         mtd->ecclayout = this->ecclayout;
2085
2086         /* Fill in remaining MTD driver data */
2087         mtd->type = MTD_NANDFLASH;
2088         mtd->flags = MTD_CAP_NANDFLASH;
2089         mtd->ecctype = MTD_ECC_SW;
2090         mtd->erase = onenand_erase;
2091         mtd->point = NULL;
2092         mtd->unpoint = NULL;
2093         mtd->read = onenand_read;
2094         mtd->write = onenand_write;
2095         mtd->read_oob = onenand_read_oob;
2096         mtd->write_oob = onenand_write_oob;
2097 #ifdef CONFIG_MTD_ONENAND_OTP
2098         mtd->get_fact_prot_info = onenand_get_fact_prot_info;
2099         mtd->read_fact_prot_reg = onenand_read_fact_prot_reg;
2100         mtd->get_user_prot_info = onenand_get_user_prot_info;
2101         mtd->read_user_prot_reg = onenand_read_user_prot_reg;
2102         mtd->write_user_prot_reg = onenand_write_user_prot_reg;
2103         mtd->lock_user_prot_reg = onenand_lock_user_prot_reg;
2104 #endif
2105         mtd->sync = onenand_sync;
2106         mtd->lock = onenand_lock;
2107         mtd->unlock = onenand_unlock;
2108         mtd->suspend = onenand_suspend;
2109         mtd->resume = onenand_resume;
2110         mtd->block_isbad = onenand_block_isbad;
2111         mtd->block_markbad = onenand_block_markbad;
2112         mtd->owner = THIS_MODULE;
2113
2114         /* Unlock whole block */
2115         onenand_unlock_all(mtd);
2116
2117         return this->scan_bbt(mtd);
2118 }
2119
2120 /**
2121  * onenand_release - [OneNAND Interface] Free resources held by the OneNAND device
2122  * @param mtd           MTD device structure
2123  */
2124 void onenand_release(struct mtd_info *mtd)
2125 {
2126         struct onenand_chip *this = mtd->priv;
2127
2128 #ifdef CONFIG_MTD_PARTITIONS
2129         /* Deregister partitions */
2130         del_mtd_partitions (mtd);
2131 #endif
2132         /* Deregister the device */
2133         del_mtd_device (mtd);
2134
2135         /* Free bad block table memory, if allocated */
2136         if (this->bbm)
2137                 kfree(this->bbm);
2138         /* Buffer allocated by onenand_scan */
2139         if (this->options & ONENAND_PAGEBUF_ALLOC)
2140                 kfree(this->page_buf);
2141 }
2142
2143 EXPORT_SYMBOL_GPL(onenand_scan);
2144 EXPORT_SYMBOL_GPL(onenand_release);
2145
2146 MODULE_LICENSE("GPL");
2147 MODULE_AUTHOR("Kyungmin Park <kyungmin.park@samsung.com>");
2148 MODULE_DESCRIPTION("Generic OneNAND flash driver code");