drivers/infiniband/hw/ipath/ipath_intr.c

   1 /*
   2  * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
   3  * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
   4  *
   5  * This software is available to you under a choice of one of two
   6  * licenses.  You may choose to be licensed under the terms of the GNU
   7  * General Public License (GPL) Version 2, available from the file
   8  * COPYING in the main directory of this source tree, or the
   9  * OpenIB.org BSD license below:
  10  *
  11  *     Redistribution and use in source and binary forms, with or
  12  *     without modification, are permitted provided that the following
  13  *     conditions are met:
  14  *
  15  *      - Redistributions of source code must retain the above
  16  *        copyright notice, this list of conditions and the following
  17  *        disclaimer.
  18  *
  19  *      - Redistributions in binary form must reproduce the above
  20  *        copyright notice, this list of conditions and the following
  21  *        disclaimer in the documentation and/or other materials
  22  *        provided with the distribution.
  23  *
  24  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  25  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
  26  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  27  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
  28  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
  29  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
  30  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  31  * SOFTWARE.
  32  */
  33
  34 #include <linux/pci.h>
  35
  36 #include "ipath_kernel.h"
  37 #include "ipath_verbs.h"
  38 #include "ipath_common.h"
  39
  40 /*
  41  * clear (write) a pio buffer, to clear a parity error.   This routine
  42  * should only be called when in freeze mode, and the buffer should be
  43  * canceled afterwards.
  44  */
  45 static void ipath_clrpiobuf(struct ipath_devdata *dd, u32 pnum)
  46 {
  47         u32 __iomem *pbuf;
  48         u32 dwcnt; /* dword count to write */
  49         if (pnum < dd->ipath_piobcnt2k) {
  50                 pbuf = (u32 __iomem *) (dd->ipath_pio2kbase + pnum *
  51                         dd->ipath_palign);
  52                 dwcnt = dd->ipath_piosize2k >> 2;
  53         }
  54         else {
  55                 pbuf = (u32 __iomem *) (dd->ipath_pio4kbase +
  56                         (pnum - dd->ipath_piobcnt2k) * dd->ipath_4kalign);
  57                 dwcnt = dd->ipath_piosize4k >> 2;
  58         }
  59         dev_info(&dd->pcidev->dev,
  60                 "Rewrite PIO buffer %u, to recover from parity error\n",
  61                 pnum);
  62         *pbuf = dwcnt+1; /* no flush required, since already in freeze */
  63         while(--dwcnt)
  64                 *pbuf++ = 0;
  65 }
  66
  67 /*
  68  * Called when we might have an error that is specific to a particular
  69  * PIO buffer, and may need to cancel that buffer, so it can be re-used.
  70  * If rewrite is true, and bits are set in the sendbufferror registers,
  71  * we'll write to the buffer, for error recovery on parity errors.
  72  */
  73 void ipath_disarm_senderrbufs(struct ipath_devdata *dd, int rewrite)
  74 {
  75         u32 piobcnt;
  76         unsigned long sbuf[4];
  77         /*
  78          * it's possible that sendbuffererror could have bits set; might
  79          * have already done this as a result of hardware error handling
  80          */
  81         piobcnt = dd->ipath_piobcnt2k + dd->ipath_piobcnt4k;
  82         /* read these before writing errorclear */
  83         sbuf[0] = ipath_read_kreg64(
  84                 dd, dd->ipath_kregs->kr_sendbuffererror);
  85         sbuf[1] = ipath_read_kreg64(
  86                 dd, dd->ipath_kregs->kr_sendbuffererror + 1);
  87         if (piobcnt > 128) {
  88                 sbuf[2] = ipath_read_kreg64(
  89                         dd, dd->ipath_kregs->kr_sendbuffererror + 2);
  90                 sbuf[3] = ipath_read_kreg64(
  91                         dd, dd->ipath_kregs->kr_sendbuffererror + 3);
  92         }
  93
  94         if (sbuf[0] || sbuf[1] || (piobcnt > 128 && (sbuf[2] || sbuf[3]))) {
  95                 int i;
  96                 if (ipath_debug & (__IPATH_PKTDBG|__IPATH_DBG) &&
  97                         dd->ipath_lastcancel > jiffies) {
  98                         __IPATH_DBG_WHICH(__IPATH_PKTDBG|__IPATH_DBG,
  99                                           "SendbufErrs %lx %lx", sbuf[0],
 100                                           sbuf[1]);
 101                         if (ipath_debug & __IPATH_PKTDBG && piobcnt > 128)
 102                                 printk(" %lx %lx ", sbuf[2], sbuf[3]);
 103                         printk("\n");
 104                 }
 105
 106                 for (i = 0; i < piobcnt; i++)
 107                         if (test_bit(i, sbuf)) {
 108                                 if (rewrite)
 109                                         ipath_clrpiobuf(dd, i);
 110                                 ipath_disarm_piobufs(dd, i, 1);
 111                         }
 112                 /* ignore armlaunch errs for a bit */
 113                 dd->ipath_lastcancel = jiffies+3;
 114         }
 115 }
 116
 117
 118 /* These are all rcv-related errors which we want to count for stats */
 119 #define E_SUM_PKTERRS \
 120         (INFINIPATH_E_RHDRLEN | INFINIPATH_E_RBADTID | \
 121          INFINIPATH_E_RBADVERSION | INFINIPATH_E_RHDR | \
 122          INFINIPATH_E_RLONGPKTLEN | INFINIPATH_E_RSHORTPKTLEN | \
 123          INFINIPATH_E_RMAXPKTLEN | INFINIPATH_E_RMINPKTLEN | \
 124          INFINIPATH_E_RFORMATERR | INFINIPATH_E_RUNSUPVL | \
 125          INFINIPATH_E_RUNEXPCHAR | INFINIPATH_E_REBP)
 126
 127 /* These are all send-related errors which we want to count for stats */
 128 #define E_SUM_ERRS \
 129         (INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SUNEXPERRPKTNUM | \
 130          INFINIPATH_E_SDROPPEDDATAPKT | INFINIPATH_E_SDROPPEDSMPPKT | \
 131          INFINIPATH_E_SMAXPKTLEN | INFINIPATH_E_SUNSUPVL | \
 132          INFINIPATH_E_SMINPKTLEN | INFINIPATH_E_SPKTLEN | \
 133          INFINIPATH_E_INVALIDADDR)
 134
 135 /*
 136  * these are errors that can occur when the link changes state while
 137  * a packet is being sent or received.  This doesn't cover things
 138  * like EBP or VCRC that can be the result of a sending having the
 139  * link change state, so we receive a "known bad" packet.
 140  */
 141 #define E_SUM_LINK_PKTERRS \
 142         (INFINIPATH_E_SDROPPEDDATAPKT | INFINIPATH_E_SDROPPEDSMPPKT | \
 143          INFINIPATH_E_SMINPKTLEN | INFINIPATH_E_SPKTLEN | \
 144          INFINIPATH_E_RSHORTPKTLEN | INFINIPATH_E_RMINPKTLEN | \
 145          INFINIPATH_E_RUNEXPCHAR)
 146
 147 static u64 handle_e_sum_errs(struct ipath_devdata *dd, ipath_err_t errs)
 148 {
 149         u64 ignore_this_time = 0;
 150
 151         ipath_disarm_senderrbufs(dd, 0);
 152         if ((errs & E_SUM_LINK_PKTERRS) &&
 153             !(dd->ipath_flags & IPATH_LINKACTIVE)) {
 154                 /*
 155                  * This can happen when SMA is trying to bring the link
 156                  * up, but the IB link changes state at the "wrong" time.
 157                  * The IB logic then complains that the packet isn't
 158                  * valid.  We don't want to confuse people, so we just
 159                  * don't print them, except at debug
 160                  */
 161                 ipath_dbg("Ignoring packet errors %llx, because link not "
 162                           "ACTIVE\n", (unsigned long long) errs);
 163                 ignore_this_time = errs & E_SUM_LINK_PKTERRS;
 164         }
 165
 166         return ignore_this_time;
 167 }
 168
 169 /* generic hw error messages... */
 170 #define INFINIPATH_HWE_TXEMEMPARITYERR_MSG(a) \
 171         { \
 172                 .mask = ( INFINIPATH_HWE_TXEMEMPARITYERR_##a <<    \
 173                           INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT ),   \
 174                 .msg = "TXE " #a " Memory Parity"            \
 175         }
 176 #define INFINIPATH_HWE_RXEMEMPARITYERR_MSG(a) \
 177         { \
 178                 .mask = ( INFINIPATH_HWE_RXEMEMPARITYERR_##a <<    \
 179                           INFINIPATH_HWE_RXEMEMPARITYERR_SHIFT ),   \
 180                 .msg = "RXE " #a " Memory Parity"            \
 181         }
 182
 183 static const struct ipath_hwerror_msgs ipath_generic_hwerror_msgs[] = {
 184         INFINIPATH_HWE_MSG(IBCBUSFRSPCPARITYERR, "IPATH2IB Parity"),
 185         INFINIPATH_HWE_MSG(IBCBUSTOSPCPARITYERR, "IB2IPATH Parity"),
 186
 187         INFINIPATH_HWE_TXEMEMPARITYERR_MSG(PIOBUF),
 188         INFINIPATH_HWE_TXEMEMPARITYERR_MSG(PIOPBC),
 189         INFINIPATH_HWE_TXEMEMPARITYERR_MSG(PIOLAUNCHFIFO),
 190
 191         INFINIPATH_HWE_RXEMEMPARITYERR_MSG(RCVBUF),
 192         INFINIPATH_HWE_RXEMEMPARITYERR_MSG(LOOKUPQ),
 193         INFINIPATH_HWE_RXEMEMPARITYERR_MSG(EAGERTID),
 194         INFINIPATH_HWE_RXEMEMPARITYERR_MSG(EXPTID),
 195         INFINIPATH_HWE_RXEMEMPARITYERR_MSG(FLAGBUF),
 196         INFINIPATH_HWE_RXEMEMPARITYERR_MSG(DATAINFO),
 197         INFINIPATH_HWE_RXEMEMPARITYERR_MSG(HDRINFO),
 198 };
 199
 200 /**
 201  * ipath_format_hwmsg - format a single hwerror message
 202  * @msg message buffer
 203  * @msgl length of message buffer
 204  * @hwmsg message to add to message buffer
 205  */
 206 static void ipath_format_hwmsg(char *msg, size_t msgl, const char *hwmsg)
 207 {
 208         strlcat(msg, "[", msgl);
 209         strlcat(msg, hwmsg, msgl);
 210         strlcat(msg, "]", msgl);
 211 }
 212
 213 /**
 214  * ipath_format_hwerrors - format hardware error messages for display
 215  * @hwerrs hardware errors bit vector
 216  * @hwerrmsgs hardware error descriptions
 217  * @nhwerrmsgs number of hwerrmsgs
 218  * @msg message buffer
 219  * @msgl message buffer length
 220  */
 221 void ipath_format_hwerrors(u64 hwerrs,
 222                            const struct ipath_hwerror_msgs *hwerrmsgs,
 223                            size_t nhwerrmsgs,
 224                            char *msg, size_t msgl)
 225 {
 226         int i;
 227         const int glen =
 228             sizeof(ipath_generic_hwerror_msgs) /
 229             sizeof(ipath_generic_hwerror_msgs[0]);
 230
 231         for (i=0; i<glen; i++) {
 232                 if (hwerrs & ipath_generic_hwerror_msgs[i].mask) {
 233                         ipath_format_hwmsg(msg, msgl,
 234                                            ipath_generic_hwerror_msgs[i].msg);
 235                 }
 236         }
 237
 238         for (i=0; i<nhwerrmsgs; i++) {
 239                 if (hwerrs & hwerrmsgs[i].mask) {
 240                         ipath_format_hwmsg(msg, msgl, hwerrmsgs[i].msg);
 241                 }
 242         }
 243 }
 244
 245 /* return the strings for the most common link states */
 246 static char *ib_linkstate(u32 linkstate)
 247 {
 248         char *ret;
 249
 250         switch (linkstate) {
 251         case IPATH_IBSTATE_INIT:
 252                 ret = "Init";
 253                 break;
 254         case IPATH_IBSTATE_ARM:
 255                 ret = "Arm";
 256                 break;
 257         case IPATH_IBSTATE_ACTIVE:
 258                 ret = "Active";
 259                 break;
 260         default:
 261                 ret = "Down";
 262         }
 263
 264         return ret;
 265 }
 266
 267 static void handle_e_ibstatuschanged(struct ipath_devdata *dd,
 268                                      ipath_err_t errs, int noprint)
 269 {
 270         u64 val;
 271         u32 ltstate, lstate;
 272
 273         /*
 274          * even if diags are enabled, we want to notice LINKINIT, etc.
 275          * We just don't want to change the LED state, or
 276          * dd->ipath_kregs->kr_ibcctrl
 277          */
 278         val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_ibcstatus);
 279         lstate = val & IPATH_IBSTATE_MASK;
 280
 281         /*
 282          * this is confusing enough when it happens that I want to always put it
 283          * on the console and in the logs.  If it was a requested state change,
 284          * we'll have already cleared the flags, so we won't print this warning
 285          */
 286         if ((lstate != IPATH_IBSTATE_ARM && lstate != IPATH_IBSTATE_ACTIVE)
 287                 && (dd->ipath_flags & (IPATH_LINKARMED | IPATH_LINKACTIVE))) {
 288                 dev_info(&dd->pcidev->dev, "Link state changed from %s to %s\n",
 289                                  (dd->ipath_flags & IPATH_LINKARMED) ? "ARM" : "ACTIVE",
 290                                  ib_linkstate(lstate));
 291                 /*
 292                  * Flush all queued sends when link went to DOWN or INIT,
 293                  * to be sure that they don't block SMA and other MAD packets
 294                  */
 295                 ipath_cancel_sends(dd);
 296         }
 297         else if (lstate == IPATH_IBSTATE_INIT || lstate == IPATH_IBSTATE_ARM ||
 298             lstate == IPATH_IBSTATE_ACTIVE) {
 299                 /*
 300                  * only print at SMA if there is a change, debug if not
 301                  * (sometimes we want to know that, usually not).
 302                  */
 303                 if (lstate == ((unsigned) dd->ipath_lastibcstat
 304                                & IPATH_IBSTATE_MASK)) {
 305                         ipath_dbg("Status change intr but no change (%s)\n",
 306                                   ib_linkstate(lstate));
 307                 }
 308                 else
 309                         ipath_cdbg(VERBOSE, "Unit %u link state %s, last "
 310                                    "was %s\n", dd->ipath_unit,
 311                                    ib_linkstate(lstate),
 312                                    ib_linkstate((unsigned)
 313                                                 dd->ipath_lastibcstat
 314                                                 & IPATH_IBSTATE_MASK));
 315         }
 316         else {
 317                 lstate = dd->ipath_lastibcstat & IPATH_IBSTATE_MASK;
 318                 if (lstate == IPATH_IBSTATE_INIT ||
 319                     lstate == IPATH_IBSTATE_ARM ||
 320                     lstate == IPATH_IBSTATE_ACTIVE)
 321                         ipath_cdbg(VERBOSE, "Unit %u link state down"
 322                                    " (state 0x%x), from %s\n",
 323                                    dd->ipath_unit,
 324                                    (u32)val & IPATH_IBSTATE_MASK,
 325                                    ib_linkstate(lstate));
 326                 else
 327                         ipath_cdbg(VERBOSE, "Unit %u link state changed "
 328                                    "to 0x%x from down (%x)\n",
 329                                    dd->ipath_unit, (u32) val, lstate);
 330         }
 331         ltstate = (val >> INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT) &
 332                 INFINIPATH_IBCS_LINKTRAININGSTATE_MASK;
 333         lstate = (val >> INFINIPATH_IBCS_LINKSTATE_SHIFT) &
 334                 INFINIPATH_IBCS_LINKSTATE_MASK;
 335
 336         if (ltstate == INFINIPATH_IBCS_LT_STATE_POLLACTIVE ||
 337             ltstate == INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
 338                 u32 last_ltstate;
 339
 340                 /*
 341                  * Ignore cycling back and forth from Polling.Active
 342                  * to Polling.Quiet while waiting for the other end of
 343                  * the link to come up. We will cycle back and forth
 344                  * between them if no cable is plugged in,
 345                  * the other device is powered off or disabled, etc.
 346                  */
 347                 last_ltstate = (dd->ipath_lastibcstat >>
 348                                 INFINIPATH_IBCS_LINKTRAININGSTATE_SHIFT)
 349                         & INFINIPATH_IBCS_LINKTRAININGSTATE_MASK;
 350                 if (last_ltstate == INFINIPATH_IBCS_LT_STATE_POLLACTIVE
 351                     || last_ltstate ==
 352                     INFINIPATH_IBCS_LT_STATE_POLLQUIET) {
 353                         if (dd->ipath_ibpollcnt > 40) {
 354                                 dd->ipath_flags |= IPATH_NOCABLE;
 355                                 *dd->ipath_statusp |=
 356                                         IPATH_STATUS_IB_NOCABLE;
 357                         } else
 358                                 dd->ipath_ibpollcnt++;
 359                         goto skip_ibchange;
 360                 }
 361         }
 362         dd->ipath_ibpollcnt = 0;        /* some state other than 2 or 3 */
 363         ipath_stats.sps_iblink++;
 364         if (ltstate != INFINIPATH_IBCS_LT_STATE_LINKUP) {
 365                 dd->ipath_flags |= IPATH_LINKDOWN;
 366                 dd->ipath_flags &= ~(IPATH_LINKUNK | IPATH_LINKINIT
 367                                      | IPATH_LINKACTIVE |
 368                                      IPATH_LINKARMED);
 369                 *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
 370                 dd->ipath_lli_counter = 0;
 371                 if (!noprint) {
 372                         if (((dd->ipath_lastibcstat >>
 373                               INFINIPATH_IBCS_LINKSTATE_SHIFT) &
 374                              INFINIPATH_IBCS_LINKSTATE_MASK)
 375                             == INFINIPATH_IBCS_L_STATE_ACTIVE)
 376                                 /* if from up to down be more vocal */
 377                                 ipath_cdbg(VERBOSE,
 378                                            "Unit %u link now down (%s)\n",
 379                                            dd->ipath_unit,
 380                                            ipath_ibcstatus_str[ltstate]);
 381                         else
 382                                 ipath_cdbg(VERBOSE, "Unit %u link is "
 383                                            "down (%s)\n", dd->ipath_unit,
 384                                            ipath_ibcstatus_str[ltstate]);
 385                 }
 386
 387                 dd->ipath_f_setextled(dd, lstate, ltstate);
 388         } else if ((val & IPATH_IBSTATE_MASK) == IPATH_IBSTATE_ACTIVE) {
 389                 dd->ipath_flags |= IPATH_LINKACTIVE;
 390                 dd->ipath_flags &=
 391                         ~(IPATH_LINKUNK | IPATH_LINKINIT | IPATH_LINKDOWN |
 392                           IPATH_LINKARMED | IPATH_NOCABLE);
 393                 *dd->ipath_statusp &= ~IPATH_STATUS_IB_NOCABLE;
 394                 *dd->ipath_statusp |=
 395                         IPATH_STATUS_IB_READY | IPATH_STATUS_IB_CONF;
 396                 dd->ipath_f_setextled(dd, lstate, ltstate);
 397         } else if ((val & IPATH_IBSTATE_MASK) == IPATH_IBSTATE_INIT) {
 398                 /*
 399                  * set INIT and DOWN.  Down is checked by most of the other
 400                  * code, but INIT is useful to know in a few places.
 401                  */
 402                 dd->ipath_flags |= IPATH_LINKINIT | IPATH_LINKDOWN;
 403                 dd->ipath_flags &=
 404                         ~(IPATH_LINKUNK | IPATH_LINKACTIVE | IPATH_LINKARMED
 405                           | IPATH_NOCABLE);
 406                 *dd->ipath_statusp &= ~(IPATH_STATUS_IB_NOCABLE
 407                                         | IPATH_STATUS_IB_READY);
 408                 dd->ipath_f_setextled(dd, lstate, ltstate);
 409         } else if ((val & IPATH_IBSTATE_MASK) == IPATH_IBSTATE_ARM) {
 410                 dd->ipath_flags |= IPATH_LINKARMED;
 411                 dd->ipath_flags &=
 412                         ~(IPATH_LINKUNK | IPATH_LINKDOWN | IPATH_LINKINIT |
 413                           IPATH_LINKACTIVE | IPATH_NOCABLE);
 414                 *dd->ipath_statusp &= ~(IPATH_STATUS_IB_NOCABLE
 415                                         | IPATH_STATUS_IB_READY);
 416                 dd->ipath_f_setextled(dd, lstate, ltstate);
 417         } else {
 418                 if (!noprint)
 419                         ipath_dbg("IBstatuschange unit %u: %s (%x)\n",
 420                                   dd->ipath_unit,
 421                                   ipath_ibcstatus_str[ltstate], ltstate);
 422         }
 423 skip_ibchange:
 424         dd->ipath_lastibcstat = val;
 425 }
 426
 427 static void handle_supp_msgs(struct ipath_devdata *dd,
 428                              unsigned supp_msgs, char msg[512])
 429 {
 430         /*
 431          * Print the message unless it's ibc status change only, which
 432          * happens so often we never want to count it.
 433          */
 434         if (dd->ipath_lasterror & ~INFINIPATH_E_IBSTATUSCHANGED) {
 435                 int iserr;
 436                 iserr = ipath_decode_err(msg, sizeof msg,
 437                                 dd->ipath_lasterror &
 438                                 ~INFINIPATH_E_IBSTATUSCHANGED);
 439                 if (dd->ipath_lasterror &
 440                         ~(INFINIPATH_E_RRCVEGRFULL |
 441                         INFINIPATH_E_RRCVHDRFULL | INFINIPATH_E_PKTERRS))
 442                         ipath_dev_err(dd, "Suppressed %u messages for "
 443                                       "fast-repeating errors (%s) (%llx)\n",
 444                                       supp_msgs, msg,
 445                                       (unsigned long long)
 446                                       dd->ipath_lasterror);
 447                 else {
 448                         /*
 449                          * rcvegrfull and rcvhdrqfull are "normal", for some
 450                          * types of processes (mostly benchmarks) that send
 451                          * huge numbers of messages, while not processing
 452                          * them. So only complain about these at debug
 453                          * level.
 454                          */
 455                         if (iserr)
 456                                 ipath_dbg("Suppressed %u messages for %s\n",
 457                                           supp_msgs, msg);
 458                         else
 459                                 ipath_cdbg(ERRPKT,
 460                                         "Suppressed %u messages for %s\n",
 461                                           supp_msgs, msg);
 462                 }
 463         }
 464 }
 465
 466 static unsigned handle_frequent_errors(struct ipath_devdata *dd,
 467                                        ipath_err_t errs, char msg[512],
 468                                        int *noprint)
 469 {
 470         unsigned long nc;
 471         static unsigned long nextmsg_time;
 472         static unsigned nmsgs, supp_msgs;
 473
 474         /*
 475          * Throttle back "fast" messages to no more than 10 per 5 seconds.
 476          * This isn't perfect, but it's a reasonable heuristic. If we get
 477          * more than 10, give a 6x longer delay.
 478          */
 479         nc = jiffies;
 480         if (nmsgs > 10) {
 481                 if (time_before(nc, nextmsg_time)) {
 482                         *noprint = 1;
 483                         if (!supp_msgs++)
 484                                 nextmsg_time = nc + HZ * 3;
 485                 }
 486                 else if (supp_msgs) {
 487                         handle_supp_msgs(dd, supp_msgs, msg);
 488                         supp_msgs = 0;
 489                         nmsgs = 0;
 490                 }
 491         }
 492         else if (!nmsgs++ || time_after(nc, nextmsg_time))
 493                 nextmsg_time = nc + HZ / 2;
 494
 495         return supp_msgs;
 496 }
 497
 498 static int handle_errors(struct ipath_devdata *dd, ipath_err_t errs)
 499 {
 500         char msg[512];
 501         u64 ignore_this_time = 0;
 502         int i, iserr = 0;
 503         int chkerrpkts = 0, noprint = 0;
 504         unsigned supp_msgs;
 505         int log_idx;
 506
 507         supp_msgs = handle_frequent_errors(dd, errs, msg, &noprint);
 508
 509         /*
 510          * don't report errors that are masked (includes those always
 511          * ignored)
 512          */
 513         errs &= ~dd->ipath_maskederrs;
 514
 515         /* do these first, they are most important */
 516         if (errs & INFINIPATH_E_HARDWARE) {
 517                 /* reuse same msg buf */
 518                 dd->ipath_f_handle_hwerrors(dd, msg, sizeof msg);
 519         } else {
 520                 u64 mask;
 521                 for (log_idx = 0; log_idx < IPATH_EEP_LOG_CNT; ++log_idx) {
 522                         mask = dd->ipath_eep_st_masks[log_idx].errs_to_log;
 523                         if (errs & mask)
 524                                 ipath_inc_eeprom_err(dd, log_idx, 1);
 525                 }
 526         }
 527
 528         if (!noprint && (errs & ~dd->ipath_e_bitsextant))
 529                 ipath_dev_err(dd, "error interrupt with unknown errors "
 530                               "%llx set\n", (unsigned long long)
 531                               (errs & ~dd->ipath_e_bitsextant));
 532
 533         if (errs & E_SUM_ERRS)
 534                 ignore_this_time = handle_e_sum_errs(dd, errs);
 535         else if ((errs & E_SUM_LINK_PKTERRS) &&
 536             !(dd->ipath_flags & IPATH_LINKACTIVE)) {
 537                 /*
 538                  * This can happen when SMA is trying to bring the link
 539                  * up, but the IB link changes state at the "wrong" time.
 540                  * The IB logic then complains that the packet isn't
 541                  * valid.  We don't want to confuse people, so we just
 542                  * don't print them, except at debug
 543                  */
 544                 ipath_dbg("Ignoring packet errors %llx, because link not "
 545                           "ACTIVE\n", (unsigned long long) errs);
 546                 ignore_this_time = errs & E_SUM_LINK_PKTERRS;
 547         }
 548
 549         if (supp_msgs == 250000) {
 550                 int s_iserr;
 551                 /*
 552                  * It's not entirely reasonable assuming that the errors set
 553                  * in the last clear period are all responsible for the
 554                  * problem, but the alternative is to assume it's the only
 555                  * ones on this particular interrupt, which also isn't great
 556                  */
 557                 dd->ipath_maskederrs |= dd->ipath_lasterror | errs;
 558                 ipath_write_kreg(dd, dd->ipath_kregs->kr_errormask,
 559                                  ~dd->ipath_maskederrs);
 560                 s_iserr = ipath_decode_err(msg, sizeof msg,
 561                                  (dd->ipath_maskederrs & ~dd->
 562                                   ipath_ignorederrs));
 563
 564                 if ((dd->ipath_maskederrs & ~dd->ipath_ignorederrs) &
 565                         ~(INFINIPATH_E_RRCVEGRFULL |
 566                         INFINIPATH_E_RRCVHDRFULL | INFINIPATH_E_PKTERRS))
 567                         ipath_dev_err(dd, "Temporarily disabling "
 568                             "error(s) %llx reporting; too frequent (%s)\n",
 569                                 (unsigned long long) (dd->ipath_maskederrs &
 570                                 ~dd->ipath_ignorederrs), msg);
 571                 else {
 572                         /*
 573                          * rcvegrfull and rcvhdrqfull are "normal",
 574                          * for some types of processes (mostly benchmarks)
 575                          * that send huge numbers of messages, while not
 576                          * processing them.  So only complain about
 577                          * these at debug level.
 578                          */
 579                         if (s_iserr)
 580                                 ipath_dbg("Temporarily disabling reporting "
 581                                     "too frequent queue full errors (%s)\n",
 582                                     msg);
 583                         else
 584                                 ipath_cdbg(ERRPKT,
 585                                     "Temporarily disabling reporting too"
 586                                     " frequent packet errors (%s)\n",
 587                                     msg);
 588                 }
 589
 590                 /*
 591                  * Re-enable the masked errors after around 3 minutes.  in
 592                  * ipath_get_faststats().  If we have a series of fast
 593                  * repeating but different errors, the interval will keep
 594                  * stretching out, but that's OK, as that's pretty
 595                  * catastrophic.
 596                  */
 597                 dd->ipath_unmasktime = jiffies + HZ * 180;
 598         }
 599
 600         ipath_write_kreg(dd, dd->ipath_kregs->kr_errorclear, errs);
 601         if (ignore_this_time)
 602                 errs &= ~ignore_this_time;
 603         if (errs & ~dd->ipath_lasterror) {
 604                 errs &= ~dd->ipath_lasterror;
 605                 /* never suppress duplicate hwerrors or ibstatuschange */
 606                 dd->ipath_lasterror |= errs &
 607                         ~(INFINIPATH_E_HARDWARE |
 608                           INFINIPATH_E_IBSTATUSCHANGED);
 609         }
 610
 611         /* likely due to cancel, so suppress */
 612         if ((errs & (INFINIPATH_E_SPKTLEN | INFINIPATH_E_SPIOARMLAUNCH)) &&
 613                 dd->ipath_lastcancel > jiffies) {
 614                 ipath_dbg("Suppressed armlaunch/spktlen after error send cancel\n");
 615                 errs &= ~(INFINIPATH_E_SPIOARMLAUNCH | INFINIPATH_E_SPKTLEN);
 616         }
 617
 618         if (!errs)
 619                 return 0;
 620
 621         if (!noprint)
 622                 /*
 623                  * the ones we mask off are handled specially below or above
 624                  */
 625                 ipath_decode_err(msg, sizeof msg,
 626                                  errs & ~(INFINIPATH_E_IBSTATUSCHANGED |
 627                                           INFINIPATH_E_RRCVEGRFULL |
 628                                           INFINIPATH_E_RRCVHDRFULL |
 629                                           INFINIPATH_E_HARDWARE));
 630         else
 631                 /* so we don't need if (!noprint) at strlcat's below */
 632                 *msg = 0;
 633
 634         if (errs & E_SUM_PKTERRS) {
 635                 ipath_stats.sps_pkterrs++;
 636                 chkerrpkts = 1;
 637         }
 638         if (errs & E_SUM_ERRS)
 639                 ipath_stats.sps_errs++;
 640
 641         if (errs & (INFINIPATH_E_RICRC | INFINIPATH_E_RVCRC)) {
 642                 ipath_stats.sps_crcerrs++;
 643                 chkerrpkts = 1;
 644         }
 645         iserr = errs & ~(E_SUM_PKTERRS | INFINIPATH_E_PKTERRS);
 646
 647
 648         /*
 649          * We don't want to print these two as they happen, or we can make
 650          * the situation even worse, because it takes so long to print
 651          * messages to serial consoles.  Kernel ports get printed from
 652          * fast_stats, no more than every 5 seconds, user ports get printed
 653          * on close
 654          */
 655         if (errs & INFINIPATH_E_RRCVHDRFULL) {
 656                 u32 hd, tl;
 657                 ipath_stats.sps_hdrqfull++;
 658                 for (i = 0; i < dd->ipath_cfgports; i++) {
 659                         struct ipath_portdata *pd = dd->ipath_pd[i];
 660                         if (i == 0) {
 661                                 hd = dd->ipath_port0head;
 662                                 tl = (u32) le64_to_cpu(
 663                                         *dd->ipath_hdrqtailptr);
 664                         } else if (pd && pd->port_cnt &&
 665                                    pd->port_rcvhdrtail_kvaddr) {
 666                                 /*
 667                                  * don't report same point multiple times,
 668                                  * except kernel
 669                                  */
 670                                 tl = *(u64 *) pd->port_rcvhdrtail_kvaddr;
 671                                 if (tl == dd->ipath_lastrcvhdrqtails[i])
 672                                         continue;
 673                                 hd = ipath_read_ureg32(dd, ur_rcvhdrhead,
 674                                                        i);
 675                         } else
 676                                 continue;
 677                         if (hd == (tl + 1) ||
 678                             (!hd && tl == dd->ipath_hdrqlast)) {
 679                                 if (i == 0)
 680                                         chkerrpkts = 1;
 681                                 dd->ipath_lastrcvhdrqtails[i] = tl;
 682                                 pd->port_hdrqfull++;
 683                                 if (test_bit(IPATH_PORT_WAITING_OVERFLOW,
 684                                              &pd->port_flag)) {
 685                                         clear_bit(
 686                                           IPATH_PORT_WAITING_OVERFLOW,
 687                                           &pd->port_flag);
 688                                         set_bit(
 689                                           IPATH_PORT_WAITING_OVERFLOW,
 690                                           &pd->int_flag);
 691                                         wake_up_interruptible(
 692                                           &pd->port_wait);
 693                                 }
 694                         }
 695                 }
 696         }
 697         if (errs & INFINIPATH_E_RRCVEGRFULL) {
 698                 /*
 699                  * since this is of less importance and not likely to
 700                  * happen without also getting hdrfull, only count
 701                  * occurrences; don't check each port (or even the kernel
 702                  * vs user)
 703                  */
 704                 ipath_stats.sps_etidfull++;
 705                 if (dd->ipath_port0head !=
 706                     (u32) le64_to_cpu(*dd->ipath_hdrqtailptr))
 707                         chkerrpkts = 1;
 708         }
 709
 710         /*
 711          * do this before IBSTATUSCHANGED, in case both bits set in a single
 712          * interrupt; we want the STATUSCHANGE to "win", so we do our
 713          * internal copy of state machine correctly
 714          */
 715         if (errs & INFINIPATH_E_RIBLOSTLINK) {
 716                 /*
 717                  * force through block below
 718                  */
 719                 errs |= INFINIPATH_E_IBSTATUSCHANGED;
 720                 ipath_stats.sps_iblink++;
 721                 dd->ipath_flags |= IPATH_LINKDOWN;
 722                 dd->ipath_flags &= ~(IPATH_LINKUNK | IPATH_LINKINIT
 723                                      | IPATH_LINKARMED | IPATH_LINKACTIVE);
 724                 *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
 725                 if (!noprint) {
 726                         u64 st = ipath_read_kreg64(
 727                                 dd, dd->ipath_kregs->kr_ibcstatus);
 728
 729                         ipath_dbg("Lost link, link now down (%s)\n",
 730                                   ipath_ibcstatus_str[st & 0xf]);
 731                 }
 732         }
 733         if (errs & INFINIPATH_E_IBSTATUSCHANGED)
 734                 handle_e_ibstatuschanged(dd, errs, noprint);
 735
 736         if (errs & INFINIPATH_E_RESET) {
 737                 if (!noprint)
 738                         ipath_dev_err(dd, "Got reset, requires re-init "
 739                                       "(unload and reload driver)\n");
 740                 dd->ipath_flags &= ~IPATH_INITTED;      /* needs re-init */
 741                 /* mark as having had error */
 742                 *dd->ipath_statusp |= IPATH_STATUS_HWERROR;
 743                 *dd->ipath_statusp &= ~IPATH_STATUS_IB_CONF;
 744         }
 745
 746         if (!noprint && *msg) {
 747                 if (iserr)
 748                         ipath_dev_err(dd, "%s error\n", msg);
 749                 else
 750                         dev_info(&dd->pcidev->dev, "%s packet problems\n",
 751                                 msg);
 752         }
 753         if (dd->ipath_state_wanted & dd->ipath_flags) {
 754                 ipath_cdbg(VERBOSE, "driver wanted state %x, iflags now %x, "
 755                            "waking\n", dd->ipath_state_wanted,
 756                            dd->ipath_flags);
 757                 wake_up_interruptible(&ipath_state_wait);
 758         }
 759
 760         return chkerrpkts;
 761 }
 762
 763 /* this is separate to allow for better optimization of ipath_intr() */
 764
 765 static void ipath_bad_intr(struct ipath_devdata *dd, u32 * unexpectp)
 766 {
 767         /*
 768          * sometimes happen during driver init and unload, don't want
 769          * to process any interrupts at that point
 770          */
 771
 772         /* this is just a bandaid, not a fix, if something goes badly
 773          * wrong */
 774         if (++*unexpectp > 100) {
 775                 if (++*unexpectp > 105) {
 776                         /*
 777                          * ok, we must be taking somebody else's interrupts,
 778                          * due to a messed up mptable and/or PIRQ table, so
 779                          * unregister the interrupt.  We've seen this during
 780                          * linuxbios development work, and it may happen in
 781                          * the future again.
 782                          */
 783                         if (dd->pcidev && dd->ipath_irq) {
 784                                 ipath_dev_err(dd, "Now %u unexpected "
 785                                               "interrupts, unregistering "
 786                                               "interrupt handler\n",
 787                                               *unexpectp);
 788                                 ipath_dbg("free_irq of irq %d\n",
 789                                           dd->ipath_irq);
 790                                 dd->ipath_f_free_irq(dd);
 791                         }
 792                 }
 793                 if (ipath_read_kreg32(dd, dd->ipath_kregs->kr_intmask)) {
 794                         ipath_dev_err(dd, "%u unexpected interrupts, "
 795                                       "disabling interrupts completely\n",
 796                                       *unexpectp);
 797                         /*
 798                          * disable all interrupts, something is very wrong
 799                          */
 800                         ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask,
 801                                          0ULL);
 802                 }
 803         } else if (*unexpectp > 1)
 804                 ipath_dbg("Interrupt when not ready, should not happen, "
 805                           "ignoring\n");
 806 }
 807
 808 static void ipath_bad_regread(struct ipath_devdata *dd)
 809 {
 810         static int allbits;
 811
 812         /* separate routine, for better optimization of ipath_intr() */
 813
 814         /*
 815          * We print the message and disable interrupts, in hope of
 816          * having a better chance of debugging the problem.
 817          */
 818         ipath_dev_err(dd,
 819                       "Read of interrupt status failed (all bits set)\n");
 820         if (allbits++) {
 821                 /* disable all interrupts, something is very wrong */
 822                 ipath_write_kreg(dd, dd->ipath_kregs->kr_intmask, 0ULL);
 823                 if (allbits == 2) {
 824                         ipath_dev_err(dd, "Still bad interrupt status, "
 825                                       "unregistering interrupt\n");
 826                         dd->ipath_f_free_irq(dd);
 827                 } else if (allbits > 2) {
 828                         if ((allbits % 10000) == 0)
 829                                 printk(".");
 830                 } else
 831                         ipath_dev_err(dd, "Disabling interrupts, "
 832                                       "multiple errors\n");
 833         }
 834 }
 835
 836 static void handle_port_pioavail(struct ipath_devdata *dd)
 837 {
 838         u32 i;
 839         /*
 840          * start from port 1, since for now port 0  is never using
 841          * wait_event for PIO
 842          */
 843         for (i = 1; dd->ipath_portpiowait && i < dd->ipath_cfgports; i++) {
 844                 struct ipath_portdata *pd = dd->ipath_pd[i];
 845
 846                 if (pd && pd->port_cnt &&
 847                     dd->ipath_portpiowait & (1U << i)) {
 848                         clear_bit(i, &dd->ipath_portpiowait);
 849                         if (test_bit(IPATH_PORT_WAITING_PIO,
 850                                      &pd->port_flag)) {
 851                                 clear_bit(IPATH_PORT_WAITING_PIO,
 852                                           &pd->port_flag);
 853                                 wake_up_interruptible(&pd->port_wait);
 854                         }
 855                 }
 856         }
 857 }
 858
 859 static void handle_layer_pioavail(struct ipath_devdata *dd)
 860 {
 861         int ret;
 862
 863         ret = ipath_ib_piobufavail(dd->verbs_dev);
 864         if (ret > 0)
 865                 goto set;
 866
 867         return;
 868 set:
 869         set_bit(IPATH_S_PIOINTBUFAVAIL, &dd->ipath_sendctrl);
 870         ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
 871                          dd->ipath_sendctrl);
 872 }
 873
 874 /*
 875  * Handle receive interrupts for user ports; this means a user
 876  * process was waiting for a packet to arrive, and didn't want
 877  * to poll
 878  */
 879 static void handle_urcv(struct ipath_devdata *dd, u32 istat)
 880 {
 881         u64 portr;
 882         int i;
 883         int rcvdint = 0;
 884
 885         portr = ((istat >> INFINIPATH_I_RCVAVAIL_SHIFT) &
 886                  dd->ipath_i_rcvavail_mask)
 887                 | ((istat >> INFINIPATH_I_RCVURG_SHIFT) &
 888                    dd->ipath_i_rcvurg_mask);
 889         for (i = 1; i < dd->ipath_cfgports; i++) {
 890                 struct ipath_portdata *pd = dd->ipath_pd[i];
 891                 if (portr & (1 << i) && pd && pd->port_cnt) {
 892                         if (test_bit(IPATH_PORT_WAITING_RCV,
 893                                      &pd->port_flag)) {
 894                                 clear_bit(IPATH_PORT_WAITING_RCV,
 895                                           &pd->port_flag);
 896                                 set_bit(IPATH_PORT_WAITING_RCV,
 897                                         &pd->int_flag);
 898                                 clear_bit(i + INFINIPATH_R_INTRAVAIL_SHIFT,
 899                                           &dd->ipath_rcvctrl);
 900                                 wake_up_interruptible(&pd->port_wait);
 901                                 rcvdint = 1;
 902                         } else if (test_bit(IPATH_PORT_WAITING_URG,
 903                                             &pd->port_flag)) {
 904                                 clear_bit(IPATH_PORT_WAITING_URG,
 905                                           &pd->port_flag);
 906                                 set_bit(IPATH_PORT_WAITING_URG,
 907                                         &pd->int_flag);
 908                                 wake_up_interruptible(&pd->port_wait);
 909                         }
 910                 }
 911         }
 912         if (rcvdint) {
 913                 /* only want to take one interrupt, so turn off the rcv
 914                  * interrupt for all the ports that we did the wakeup on
 915                  * (but never for kernel port)
 916                  */
 917                 ipath_write_kreg(dd, dd->ipath_kregs->kr_rcvctrl,
 918                                  dd->ipath_rcvctrl);
 919         }
 920 }
 921
 922 irqreturn_t ipath_intr(int irq, void *data)
 923 {
 924         struct ipath_devdata *dd = data;
 925         u32 istat, chk0rcv = 0;
 926         ipath_err_t estat = 0;
 927         irqreturn_t ret;
 928         u32 oldhead, curtail;
 929         static unsigned unexpected = 0;
 930         static const u32 port0rbits = (1U<<INFINIPATH_I_RCVAVAIL_SHIFT) |
 931                  (1U<<INFINIPATH_I_RCVURG_SHIFT);
 932
 933         ipath_stats.sps_ints++;
 934
 935         if (!(dd->ipath_flags & IPATH_PRESENT)) {
 936                 /*
 937                  * This return value is not great, but we do not want the
 938                  * interrupt core code to remove our interrupt handler
 939                  * because we don't appear to be handling an interrupt
 940                  * during a chip reset.
 941                  */
 942                 return IRQ_HANDLED;
 943         }
 944
 945         /*
 946          * this needs to be flags&initted, not statusp, so we keep
 947          * taking interrupts even after link goes down, etc.
 948          * Also, we *must* clear the interrupt at some point, or we won't
 949          * take it again, which can be real bad for errors, etc...
 950          */
 951
 952         if (!(dd->ipath_flags & IPATH_INITTED)) {
 953                 ipath_bad_intr(dd, &unexpected);
 954                 ret = IRQ_NONE;
 955                 goto bail;
 956         }
 957
 958         /*
 959          * We try to avoid reading the interrupt status register, since
 960          * that's a PIO read, and stalls the processor for up to about
 961          * ~0.25 usec. The idea is that if we processed a port0 packet,
 962          * we blindly clear the  port 0 receive interrupt bits, and nothing
 963          * else, then return.  If other interrupts are pending, the chip
 964          * will re-interrupt us as soon as we write the intclear register.
 965          * We then won't process any more kernel packets (if not the 2nd
 966          * time, then the 3rd or 4th) and we'll then handle the other
 967          * interrupts.   We clear the interrupts first so that we don't
 968          * lose intr for later packets that arrive while we are processing.
 969          */
 970         oldhead = dd->ipath_port0head;
 971         curtail = (u32)le64_to_cpu(*dd->ipath_hdrqtailptr);
 972         if (oldhead != curtail) {
 973                 if (dd->ipath_flags & IPATH_GPIO_INTR) {
 974                         ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_clear,
 975                                          (u64) (1 << IPATH_GPIO_PORT0_BIT));
 976                         istat = port0rbits | INFINIPATH_I_GPIO;
 977                 }
 978                 else
 979                         istat = port0rbits;
 980                 ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, istat);
 981                 ipath_kreceive(dd);
 982                 if (oldhead != dd->ipath_port0head) {
 983                         ipath_stats.sps_fastrcvint++;
 984                         goto done;
 985                 }
 986         }
 987
 988         istat = ipath_read_kreg32(dd, dd->ipath_kregs->kr_intstatus);
 989
 990         if (unlikely(!istat)) {
 991                 ipath_stats.sps_nullintr++;
 992                 ret = IRQ_NONE; /* not our interrupt, or already handled */
 993                 goto bail;
 994         }
 995         if (unlikely(istat == -1)) {
 996                 ipath_bad_regread(dd);
 997                 /* don't know if it was our interrupt or not */
 998                 ret = IRQ_NONE;
 999                 goto bail;
1000         }
1001
1002         if (unexpected)
1003                 unexpected = 0;
1004
1005         if (unlikely(istat & ~dd->ipath_i_bitsextant))
1006                 ipath_dev_err(dd,
1007                               "interrupt with unknown interrupts %x set\n",
1008                               istat & (u32) ~ dd->ipath_i_bitsextant);
1009         else
1010                 ipath_cdbg(VERBOSE, "intr stat=0x%x\n", istat);
1011
1012         if (unlikely(istat & INFINIPATH_I_ERROR)) {
1013                 ipath_stats.sps_errints++;
1014                 estat = ipath_read_kreg64(dd,
1015                                           dd->ipath_kregs->kr_errorstatus);
1016                 if (!estat)
1017                         dev_info(&dd->pcidev->dev, "error interrupt (%x), "
1018                                  "but no error bits set!\n", istat);
1019                 else if (estat == -1LL)
1020                         /*
1021                          * should we try clearing all, or hope next read
1022                          * works?
1023                          */
1024                         ipath_dev_err(dd, "Read of error status failed "
1025                                       "(all bits set); ignoring\n");
1026                 else
1027                         if (handle_errors(dd, estat))
1028                                 /* force calling ipath_kreceive() */
1029                                 chk0rcv = 1;
1030         }
1031
1032         if (istat & INFINIPATH_I_GPIO) {
1033                 /*
1034                  * GPIO interrupts fall in two broad classes:
1035                  * GPIO_2 indicates (on some HT4xx boards) that a packet
1036                  *        has arrived for Port 0. Checking for this
1037                  *        is controlled by flag IPATH_GPIO_INTR.
1038                  * GPIO_3..5 on IBA6120 Rev2 chips indicate errors
1039                  *        that we need to count. Checking for this
1040                  *        is controlled by flag IPATH_GPIO_ERRINTRS.
1041                  */
1042                 u32 gpiostatus;
1043                 u32 to_clear = 0;
1044
1045                 gpiostatus = ipath_read_kreg32(
1046                         dd, dd->ipath_kregs->kr_gpio_status);
1047                 /* First the error-counter case.
1048                  */
1049                 if ((gpiostatus & IPATH_GPIO_ERRINTR_MASK) &&
1050                     (dd->ipath_flags & IPATH_GPIO_ERRINTRS)) {
1051                         /* want to clear the bits we see asserted. */
1052                         to_clear |= (gpiostatus & IPATH_GPIO_ERRINTR_MASK);
1053
1054                         /*
1055                          * Count appropriately, clear bits out of our copy,
1056                          * as they have been "handled".
1057                          */
1058                         if (gpiostatus & (1 << IPATH_GPIO_RXUVL_BIT)) {
1059                                 ipath_dbg("FlowCtl on UnsupVL\n");
1060                                 dd->ipath_rxfc_unsupvl_errs++;
1061                         }
1062                         if (gpiostatus & (1 << IPATH_GPIO_OVRUN_BIT)) {
1063                                 ipath_dbg("Overrun Threshold exceeded\n");
1064                                 dd->ipath_overrun_thresh_errs++;
1065                         }
1066                         if (gpiostatus & (1 << IPATH_GPIO_LLI_BIT)) {
1067                                 ipath_dbg("Local Link Integrity error\n");
1068                                 dd->ipath_lli_errs++;
1069                         }
1070                         gpiostatus &= ~IPATH_GPIO_ERRINTR_MASK;
1071                 }
1072                 /* Now the Port0 Receive case */
1073                 if ((gpiostatus & (1 << IPATH_GPIO_PORT0_BIT)) &&
1074                     (dd->ipath_flags & IPATH_GPIO_INTR)) {
1075                         /*
1076                          * GPIO status bit 2 is set, and we expected it.
1077                          * clear it and indicate in p0bits.
1078                          * This probably only happens if a Port0 pkt
1079                          * arrives at _just_ the wrong time, and we
1080                          * handle that by seting chk0rcv;
1081                          */
1082                         to_clear |= (1 << IPATH_GPIO_PORT0_BIT);
1083                         gpiostatus &= ~(1 << IPATH_GPIO_PORT0_BIT);
1084                         chk0rcv = 1;
1085                 }
1086                 if (gpiostatus) {
1087                         /*
1088                          * Some unexpected bits remain. If they could have
1089                          * caused the interrupt, complain and clear.
1090                          * MEA: this is almost certainly non-ideal.
1091                          * we should look into auto-disable of unexpected
1092                          * GPIO interrupts, possibly on a "three strikes"
1093                          * basis.
1094                          */
1095                         const u32 mask = (u32) dd->ipath_gpio_mask;
1096
1097                         if (mask & gpiostatus) {
1098                                 ipath_dbg("Unexpected GPIO IRQ bits %x\n",
1099                                   gpiostatus & mask);
1100                                 to_clear |= (gpiostatus & mask);
1101                         }
1102                 }
1103                 if (to_clear) {
1104                         ipath_write_kreg(dd, dd->ipath_kregs->kr_gpio_clear,
1105                                         (u64) to_clear);
1106                 }
1107         }
1108         chk0rcv |= istat & port0rbits;
1109
1110         /*
1111          * Clear the interrupt bits we found set, unless they are receive
1112          * related, in which case we already cleared them above, and don't
1113          * want to clear them again, because we might lose an interrupt.
1114          * Clear it early, so we "know" know the chip will have seen this by
1115          * the time we process the queue, and will re-interrupt if necessary.
1116          * The processor itself won't take the interrupt again until we return.
1117          */
1118         ipath_write_kreg(dd, dd->ipath_kregs->kr_intclear, istat);
1119
1120         /*
1121          * handle port0 receive  before checking for pio buffers available,
1122          * since receives can overflow; piobuf waiters can afford a few
1123          * extra cycles, since they were waiting anyway, and user's waiting
1124          * for receive are at the bottom.
1125          */
1126         if (chk0rcv) {
1127                 ipath_kreceive(dd);
1128                 istat &= ~port0rbits;
1129         }
1130
1131         if (istat & ((dd->ipath_i_rcvavail_mask <<
1132                       INFINIPATH_I_RCVAVAIL_SHIFT)
1133                      | (dd->ipath_i_rcvurg_mask <<
1134                         INFINIPATH_I_RCVURG_SHIFT)))
1135                 handle_urcv(dd, istat);
1136
1137         if (istat & INFINIPATH_I_SPIOBUFAVAIL) {
1138                 clear_bit(IPATH_S_PIOINTBUFAVAIL, &dd->ipath_sendctrl);
1139                 ipath_write_kreg(dd, dd->ipath_kregs->kr_sendctrl,
1140                                  dd->ipath_sendctrl);
1141
1142                 if (dd->ipath_portpiowait)
1143                         handle_port_pioavail(dd);
1144
1145                 handle_layer_pioavail(dd);
1146         }
1147
1148 done:
1149         ret = IRQ_HANDLED;
1150
1151 bail:
1152         return ret;
1153 }