arch/powerpc/platforms/85xx/mpc85xx_mds.c

   1 /*
   2  * Copyright (C) Freescale Semicondutor, Inc. 2006-2010. All rights reserved.
   3  *
   4  * Author: Andy Fleming <afleming@freescale.com>
   5  *
   6  * Based on 83xx/mpc8360e_pb.c by:
   7  *         Li Yang <LeoLi@freescale.com>
   8  *         Yin Olivia <Hong-hua.Yin@freescale.com>
   9  *
  10  * Description:
  11  * MPC85xx MDS board specific routines.
  12  *
  13  * This program is free software; you can redistribute  it and/or modify it
  14  * under  the terms of  the GNU General  Public License as published by the
  15  * Free Software Foundation;  either version 2 of the  License, or (at your
  16  * option) any later version.
  17  */
  18
  19 #include <linux/stddef.h>
  20 #include <linux/kernel.h>
  21 #include <linux/init.h>
  22 #include <linux/errno.h>
  23 #include <linux/reboot.h>
  24 #include <linux/pci.h>
  25 #include <linux/kdev_t.h>
  26 #include <linux/major.h>
  27 #include <linux/console.h>
  28 #include <linux/delay.h>
  29 #include <linux/seq_file.h>
  30 #include <linux/initrd.h>
  31 #include <linux/module.h>
  32 #include <linux/fsl_devices.h>
  33 #include <linux/of_platform.h>
  34 #include <linux/of_device.h>
  35 #include <linux/phy.h>
  36 #include <linux/memblock.h>
  37
  38 #include <asm/system.h>
  39 #include <asm/atomic.h>
  40 #include <asm/time.h>
  41 #include <asm/io.h>
  42 #include <asm/machdep.h>
  43 #include <asm/pci-bridge.h>
  44 #include <asm/irq.h>
  45 #include <mm/mmu_decl.h>
  46 #include <asm/prom.h>
  47 #include <asm/udbg.h>
  48 #include <sysdev/fsl_soc.h>
  49 #include <sysdev/fsl_pci.h>
  50 #include <sysdev/simple_gpio.h>
  51 #include <asm/qe.h>
  52 #include <asm/qe_ic.h>
  53 #include <asm/mpic.h>
  54 #include <asm/swiotlb.h>
  55
  56 #undef DEBUG
  57 #ifdef DEBUG
  58 #define DBG(fmt...) udbg_printf(fmt)
  59 #else
  60 #define DBG(fmt...)
  61 #endif
  62
  63 #define MV88E1111_SCR   0x10
  64 #define MV88E1111_SCR_125CLK    0x0010
  65 static int mpc8568_fixup_125_clock(struct phy_device *phydev)
  66 {
  67         int scr;
  68         int err;
  69
  70         /* Workaround for the 125 CLK Toggle */
  71         scr = phy_read(phydev, MV88E1111_SCR);
  72
  73         if (scr < 0)
  74                 return scr;
  75
  76         err = phy_write(phydev, MV88E1111_SCR, scr & ~(MV88E1111_SCR_125CLK));
  77
  78         if (err)
  79                 return err;
  80
  81         err = phy_write(phydev, MII_BMCR, BMCR_RESET);
  82
  83         if (err)
  84                 return err;
  85
  86         scr = phy_read(phydev, MV88E1111_SCR);
  87
  88         if (scr < 0)
  89                 return scr;
  90
  91         err = phy_write(phydev, MV88E1111_SCR, scr | 0x0008);
  92
  93         return err;
  94 }
  95
  96 static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
  97 {
  98         int temp;
  99         int err;
 100
 101         /* Errata */
 102         err = phy_write(phydev,29, 0x0006);
 103
 104         if (err)
 105                 return err;
 106
 107         temp = phy_read(phydev, 30);
 108
 109         if (temp < 0)
 110                 return temp;
 111
 112         temp = (temp & (~0x8000)) | 0x4000;
 113         err = phy_write(phydev,30, temp);
 114
 115         if (err)
 116                 return err;
 117
 118         err = phy_write(phydev,29, 0x000a);
 119
 120         if (err)
 121                 return err;
 122
 123         temp = phy_read(phydev, 30);
 124
 125         if (temp < 0)
 126                 return temp;
 127
 128         temp = phy_read(phydev, 30);
 129
 130         if (temp < 0)
 131                 return temp;
 132
 133         temp &= ~0x0020;
 134
 135         err = phy_write(phydev,30,temp);
 136
 137         if (err)
 138                 return err;
 139
 140         /* Disable automatic MDI/MDIX selection */
 141         temp = phy_read(phydev, 16);
 142
 143         if (temp < 0)
 144                 return temp;
 145
 146         temp &= ~0x0060;
 147         err = phy_write(phydev,16,temp);
 148
 149         return err;
 150 }
 151
 152 /* ************************************************************************
 153  *
 154  * Setup the architecture
 155  *
 156  */
 157 #ifdef CONFIG_SMP
 158 extern void __init mpc85xx_smp_init(void);
 159 #endif
 160
 161 #ifdef CONFIG_QUICC_ENGINE
 162 static struct of_device_id mpc85xx_qe_ids[] __initdata = {
 163         { .type = "qe", },
 164         { .compatible = "fsl,qe", },
 165         { },
 166 };
 167
 168 static void __init mpc85xx_publish_qe_devices(void)
 169 {
 170         struct device_node *np;
 171
 172         np = of_find_compatible_node(NULL, NULL, "fsl,qe");
 173         if (!of_device_is_available(np)) {
 174                 of_node_put(np);
 175                 return;
 176         }
 177
 178         of_platform_bus_probe(NULL, mpc85xx_qe_ids, NULL);
 179 }
 180
 181 static void __init mpc85xx_mds_reset_ucc_phys(void)
 182 {
 183         struct device_node *np;
 184         static u8 __iomem *bcsr_regs;
 185
 186         /* Map BCSR area */
 187         np = of_find_node_by_name(NULL, "bcsr");
 188         if (!np)
 189                 return;
 190
 191         bcsr_regs = of_iomap(np, 0);
 192         of_node_put(np);
 193         if (!bcsr_regs)
 194                 return;
 195
 196         if (machine_is(mpc8568_mds)) {
 197 #define BCSR_UCC1_GETH_EN       (0x1 << 7)
 198 #define BCSR_UCC2_GETH_EN       (0x1 << 7)
 199 #define BCSR_UCC1_MODE_MSK      (0x3 << 4)
 200 #define BCSR_UCC2_MODE_MSK      (0x3 << 0)
 201
 202                 /* Turn off UCC1 & UCC2 */
 203                 clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
 204                 clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
 205
 206                 /* Mode is RGMII, all bits clear */
 207                 clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK |
 208                                          BCSR_UCC2_MODE_MSK);
 209
 210                 /* Turn UCC1 & UCC2 on */
 211                 setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
 212                 setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
 213         } else if (machine_is(mpc8569_mds)) {
 214 #define BCSR7_UCC12_GETHnRST    (0x1 << 2)
 215 #define BCSR8_UEM_MARVELL_RST   (0x1 << 1)
 216 #define BCSR_UCC_RGMII          (0x1 << 6)
 217 #define BCSR_UCC_RTBI           (0x1 << 5)
 218                 /*
 219                  * U-Boot mangles interrupt polarity for Marvell PHYs,
 220                  * so reset built-in and UEM Marvell PHYs, this puts
 221                  * the PHYs into their normal state.
 222                  */
 223                 clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
 224                 setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
 225
 226                 setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
 227                 clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
 228
 229                 for (np = NULL; (np = of_find_compatible_node(np,
 230                                                 "network",
 231                                                 "ucc_geth")) != NULL;) {
 232                         const unsigned int *prop;
 233                         int ucc_num;
 234
 235                         prop = of_get_property(np, "cell-index", NULL);
 236                         if (prop == NULL)
 237                                 continue;
 238
 239                         ucc_num = *prop - 1;
 240
 241                         prop = of_get_property(np, "phy-connection-type", NULL);
 242                         if (prop == NULL)
 243                                 continue;
 244
 245                         if (strcmp("rtbi", (const char *)prop) == 0)
 246                                 clrsetbits_8(&bcsr_regs[7 + ucc_num],
 247                                         BCSR_UCC_RGMII, BCSR_UCC_RTBI);
 248                 }
 249         } else if (machine_is(p1021_mds)) {
 250 #define BCSR11_ENET_MICRST     (0x1 << 5)
 251                 /* Reset Micrel PHY */
 252                 clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
 253                 setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
 254         }
 255
 256         iounmap(bcsr_regs);
 257 }
 258
 259 static void __init mpc85xx_mds_qe_init(void)
 260 {
 261         struct device_node *np;
 262
 263         np = of_find_compatible_node(NULL, NULL, "fsl,qe");
 264         if (!np) {
 265                 np = of_find_node_by_name(NULL, "qe");
 266                 if (!np)
 267                         return;
 268         }
 269
 270         if (!of_device_is_available(np)) {
 271                 of_node_put(np);
 272                 return;
 273         }
 274
 275         qe_reset();
 276         of_node_put(np);
 277
 278         np = of_find_node_by_name(NULL, "par_io");
 279         if (np) {
 280                 struct device_node *ucc;
 281
 282                 par_io_init(np);
 283                 of_node_put(np);
 284
 285                 for_each_node_by_name(ucc, "ucc")
 286                         par_io_of_config(ucc);
 287         }
 288
 289         mpc85xx_mds_reset_ucc_phys();
 290
 291         if (machine_is(p1021_mds)) {
 292 #define MPC85xx_PMUXCR_OFFSET           0x60
 293 #define MPC85xx_PMUXCR_QE0              0x00008000
 294 #define MPC85xx_PMUXCR_QE3              0x00001000
 295 #define MPC85xx_PMUXCR_QE9              0x00000040
 296 #define MPC85xx_PMUXCR_QE12             0x00000008
 297                 static __be32 __iomem *pmuxcr;
 298
 299                 np = of_find_node_by_name(NULL, "global-utilities");
 300
 301                 if (np) {
 302                         pmuxcr = of_iomap(np, 0) + MPC85xx_PMUXCR_OFFSET;
 303
 304                         if (!pmuxcr)
 305                                 printk(KERN_EMERG "Error: Alternate function"
 306                                         " signal multiplex control register not"
 307                                         " mapped!\n");
 308                         else
 309                         /* P1021 has pins muxed for QE and other functions. To
 310                          * enable QE UEC mode, we need to set bit QE0 for UCC1
 311                          * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
 312                          * and QE12 for QE MII management singals in PMUXCR
 313                          * register.
 314                          */
 315                                 setbits32(pmuxcr, MPC85xx_PMUXCR_QE0 |
 316                                                   MPC85xx_PMUXCR_QE3 |
 317                                                   MPC85xx_PMUXCR_QE9 |
 318                                                   MPC85xx_PMUXCR_QE12);
 319
 320                         of_node_put(np);
 321                 }
 322
 323         }
 324 }
 325
 326 static void __init mpc85xx_mds_qeic_init(void)
 327 {
 328         struct device_node *np;
 329
 330         np = of_find_compatible_node(NULL, NULL, "fsl,qe");
 331         if (!of_device_is_available(np)) {
 332                 of_node_put(np);
 333                 return;
 334         }
 335
 336         np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
 337         if (!np) {
 338                 np = of_find_node_by_type(NULL, "qeic");
 339                 if (!np)
 340                         return;
 341         }
 342
 343         if (machine_is(p1021_mds))
 344                 qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
 345                                 qe_ic_cascade_high_mpic);
 346         else
 347                 qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
 348         of_node_put(np);
 349 }
 350 #else
 351 static void __init mpc85xx_publish_qe_devices(void) { }
 352 static void __init mpc85xx_mds_qe_init(void) { }
 353 static void __init mpc85xx_mds_qeic_init(void) { }
 354 #endif  /* CONFIG_QUICC_ENGINE */
 355
 356 static void __init mpc85xx_mds_setup_arch(void)
 357 {
 358 #ifdef CONFIG_PCI
 359         struct pci_controller *hose;
 360 #endif
 361         dma_addr_t max = 0xffffffff;
 362
 363         if (ppc_md.progress)
 364                 ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
 365
 366 #ifdef CONFIG_PCI
 367         for_each_node_by_type(np, "pci") {
 368                 if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
 369                     of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
 370                         struct resource rsrc;
 371                         of_address_to_resource(np, 0, &rsrc);
 372                         if ((rsrc.start & 0xfffff) == 0x8000)
 373                                 fsl_add_bridge(np, 1);
 374                         else
 375                                 fsl_add_bridge(np, 0);
 376
 377                         hose = pci_find_hose_for_OF_device(np);
 378                         max = min(max, hose->dma_window_base_cur +
 379                                         hose->dma_window_size);
 380                 }
 381         }
 382 #endif
 383
 384 #ifdef CONFIG_SMP
 385         mpc85xx_smp_init();
 386 #endif
 387
 388         mpc85xx_mds_qe_init();
 389
 390 #ifdef CONFIG_SWIOTLB
 391         if (memblock_end_of_DRAM() > max) {
 392                 ppc_swiotlb_enable = 1;
 393                 set_pci_dma_ops(&swiotlb_dma_ops);
 394                 ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
 395         }
 396 #endif
 397 }
 398
 399
 400 static int __init board_fixups(void)
 401 {
 402         char phy_id[20];
 403         char *compstrs[2] = {"fsl,gianfar-mdio", "fsl,ucc-mdio"};
 404         struct device_node *mdio;
 405         struct resource res;
 406         int i;
 407
 408         for (i = 0; i < ARRAY_SIZE(compstrs); i++) {
 409                 mdio = of_find_compatible_node(NULL, NULL, compstrs[i]);
 410
 411                 of_address_to_resource(mdio, 0, &res);
 412                 snprintf(phy_id, sizeof(phy_id), "%llx:%02x",
 413                         (unsigned long long)res.start, 1);
 414
 415                 phy_register_fixup_for_id(phy_id, mpc8568_fixup_125_clock);
 416                 phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
 417
 418                 /* Register a workaround for errata */
 419                 snprintf(phy_id, sizeof(phy_id), "%llx:%02x",
 420                         (unsigned long long)res.start, 7);
 421                 phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
 422
 423                 of_node_put(mdio);
 424         }
 425
 426         return 0;
 427 }
 428 machine_arch_initcall(mpc8568_mds, board_fixups);
 429 machine_arch_initcall(mpc8569_mds, board_fixups);
 430
 431 static struct of_device_id mpc85xx_ids[] = {
 432         { .type = "soc", },
 433         { .compatible = "soc", },
 434         { .compatible = "simple-bus", },
 435         { .compatible = "gianfar", },
 436         { .compatible = "fsl,rapidio-delta", },
 437         { .compatible = "fsl,mpc8548-guts", },
 438         { .compatible = "gpio-leds", },
 439         {},
 440 };
 441
 442 static struct of_device_id p1021_ids[] = {
 443         { .type = "soc", },
 444         { .compatible = "soc", },
 445         { .compatible = "simple-bus", },
 446         { .compatible = "gianfar", },
 447         {},
 448 };
 449
 450 static int __init mpc85xx_publish_devices(void)
 451 {
 452         if (machine_is(mpc8568_mds))
 453                 simple_gpiochip_init("fsl,mpc8568mds-bcsr-gpio");
 454         if (machine_is(mpc8569_mds))
 455                 simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
 456
 457         of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
 458         mpc85xx_publish_qe_devices();
 459
 460         return 0;
 461 }
 462
 463 static int __init p1021_publish_devices(void)
 464 {
 465         of_platform_bus_probe(NULL, p1021_ids, NULL);
 466         mpc85xx_publish_qe_devices();
 467
 468         return 0;
 469 }
 470
 471 machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
 472 machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
 473 machine_device_initcall(p1021_mds, p1021_publish_devices);
 474
 475 machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier);
 476 machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier);
 477 machine_arch_initcall(p1021_mds, swiotlb_setup_bus_notifier);
 478
 479 static void __init mpc85xx_mds_pic_init(void)
 480 {
 481         struct mpic *mpic;
 482         struct resource r;
 483         struct device_node *np = NULL;
 484
 485         np = of_find_node_by_type(NULL, "open-pic");
 486         if (!np)
 487                 return;
 488
 489         if (of_address_to_resource(np, 0, &r)) {
 490                 printk(KERN_ERR "Failed to map mpic register space\n");
 491                 of_node_put(np);
 492                 return;
 493         }
 494
 495         mpic = mpic_alloc(np, r.start,
 496                         MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
 497                         MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
 498                         0, 256, " OpenPIC  ");
 499         BUG_ON(mpic == NULL);
 500         of_node_put(np);
 501
 502         mpic_init(mpic);
 503         mpc85xx_mds_qeic_init();
 504 }
 505
 506 static int __init mpc85xx_mds_probe(void)
 507 {
 508         unsigned long root = of_get_flat_dt_root();
 509
 510         return of_flat_dt_is_compatible(root, "MPC85xxMDS");
 511 }
 512
 513 define_machine(mpc8568_mds) {
 514         .name           = "MPC8568 MDS",
 515         .probe          = mpc85xx_mds_probe,
 516         .setup_arch     = mpc85xx_mds_setup_arch,
 517         .init_IRQ       = mpc85xx_mds_pic_init,
 518         .get_irq        = mpic_get_irq,
 519         .restart        = fsl_rstcr_restart,
 520         .calibrate_decr = generic_calibrate_decr,
 521         .progress       = udbg_progress,
 522 #ifdef CONFIG_PCI
 523         .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
 524 #endif
 525 };
 526
 527 static int __init mpc8569_mds_probe(void)
 528 {
 529         unsigned long root = of_get_flat_dt_root();
 530
 531         return of_flat_dt_is_compatible(root, "fsl,MPC8569EMDS");
 532 }
 533
 534 define_machine(mpc8569_mds) {
 535         .name           = "MPC8569 MDS",
 536         .probe          = mpc8569_mds_probe,
 537         .setup_arch     = mpc85xx_mds_setup_arch,
 538         .init_IRQ       = mpc85xx_mds_pic_init,
 539         .get_irq        = mpic_get_irq,
 540         .restart        = fsl_rstcr_restart,
 541         .calibrate_decr = generic_calibrate_decr,
 542         .progress       = udbg_progress,
 543 #ifdef CONFIG_PCI
 544         .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
 545 #endif
 546 };
 547
 548 static int __init p1021_mds_probe(void)
 549 {
 550         unsigned long root = of_get_flat_dt_root();
 551
 552         return of_flat_dt_is_compatible(root, "fsl,P1021MDS");
 553
 554 }
 555
 556 define_machine(p1021_mds) {
 557         .name           = "P1021 MDS",
 558         .probe          = p1021_mds_probe,
 559         .setup_arch     = mpc85xx_mds_setup_arch,
 560         .init_IRQ       = mpc85xx_mds_pic_init,
 561         .get_irq        = mpic_get_irq,
 562         .restart        = fsl_rstcr_restart,
 563         .calibrate_decr = generic_calibrate_decr,
 564         .progress       = udbg_progress,
 565 #ifdef CONFIG_PCI
 566         .pcibios_fixup_bus      = fsl_pcibios_fixup_bus,
 567 #endif
 568 };
 569