3 menu "Intel PXA2xx/PXA3xx Implementations"
5 comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
8 bool "Intel DBPXA250 Development Platform (aka Lubbock)"
11 select PXA_HAVE_BOARD_IRQS
14 bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
17 select PXA_HAVE_BOARD_IRQS
24 select PXA_HAVE_BOARD_IRQS
26 config MACH_ZYLONITE300
27 bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
32 config MACH_ZYLONITE320
33 bool "PXA3xx Development Platform (aka Zylonite) PXA320"
38 bool "PXA3xx Form Factor Platform (aka Littleton)"
45 bool "PXA930 Evaluation Board (aka TavorEVB)"
50 bool "PXA930 Handheld Platform (aka SAAR)"
54 comment "Third Party Dev Platforms (sorted by vendor name)"
57 bool "Accelent Xscale IDP"
61 bool "Arcom/Eurotech VIPER SBC"
66 select PXA_HAVE_BOARD_IRQS
67 select PXA_HAVE_ISA_IRQS
70 config MACH_ARCOM_ZEUS
71 bool "Arcom/Eurotech ZEUS SBC"
74 select PXA_HAVE_BOARD_IRQS
75 select PXA_HAVE_ISA_IRQS
79 bool "Balloon 3 board"
82 select PXA_HAVE_BOARD_IRQS
85 bool "Enable Cogent CSB726 System On a Module"
89 Say Y here if you intend to run this kernel on a Cogent
90 CSB726 System On Module.
93 bool "Enable support for CSB701 baseboard"
94 depends on MACH_CSB726
97 bool "CompuLab CM-X255/CM-X270 modules"
104 bool "CompuLab EM-x270 platform"
108 bool "CompuLab eXeda platform"
112 bool "CompuLab CM-X300 modules"
119 bool "Gumstix XScale 255 boards"
122 Say Y here if you intend to run this kernel on
123 Basix, Connex, ws-200ax, ws-400ax systems
126 prompt "Gumstix Carrier/Expansion Board"
127 depends on ARCH_GUMSTIX
129 config GUMSTIX_AM200EPD
130 bool "Enable AM200EPD board support"
132 config GUMSTIX_AM300EPD
133 bool "Enable AM300EPD board support"
137 config MACH_INTELMOTE2
138 bool "Intel Mote 2 Platform"
141 select PXA_HAVE_BOARD_IRQS
143 config MACH_STARGATE2
144 bool "Intel Stargate 2 Platform"
147 select PXA_HAVE_BOARD_IRQS
150 bool "Iskratel Electronics XCEP"
153 select MTD_PARTITIONS
155 select MTD_CFI_INTELEXT
161 PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
162 Tuned for usage in Libera instruments for particle accelerators.
165 bool "PXA based Keith und Koep Trizeps DIMM-Modules"
168 bool "Keith und Koep Trizeps4 DIMM-Module"
169 depends on TRIZEPS_PXA
170 select TRIZEPS_PCMCIA
173 config MACH_TRIZEPS4WL
174 bool "Keith und Koep Trizeps4-WL DIMM-Module"
175 depends on TRIZEPS_PXA
176 select TRIZEPS_PCMCIA
181 prompt "Select base board for Trizeps module"
182 depends on TRIZEPS_PXA
184 config MACH_TRIZEPS_CONXS
185 bool "ConXS Eval Board"
187 config MACH_TRIZEPS_UCONXS
188 bool "uConXS Eval Board"
190 config MACH_TRIZEPS_ANY
198 Generic option for Arcom Viper/Zeus PCMCIA
200 config TRIZEPS_PCMCIA
203 Enable PCMCIA support for Trizeps modules
205 config MACH_LOGICPD_PXA270
206 bool "LogicPD PXA270 Card Engine Development Platform"
209 select PXA_HAVE_BOARD_IRQS
212 bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
216 select PXA_HAVE_BOARD_IRQS
218 config MACH_PCM990_BASEBOARD
219 bool "PHYTEC PCM-990 development board"
221 depends on MACH_PCM027
224 prompt "display on pcm990"
225 depends on MACH_PCM990_BASEBOARD
227 config PCM990_DISPLAY_SHARP
228 bool "sharp lq084v1dg21 stn display"
230 config PCM990_DISPLAY_NEC
231 bool "nec nl6448bc20_18d tft display"
233 config PCM990_DISPLAY_NONE
239 bool "Toradex Colibri PXA270"
242 config MACH_COLIBRI300
243 bool "Toradex Colibri PXA300/310"
248 config MACH_COLIBRI320
249 bool "Toradex Colibri PXA320"
253 comment "End-user Products (sorted by vendor name)"
256 bool "HP iPAQ hx4700"
261 select PXA_HAVE_BOARD_IRQS
268 bool "HTC Himalaya Support"
273 bool "Enable HTC Magician Support"
278 select PXA_HAVE_BOARD_IRQS
281 bool "Mitac Mio A701 Support"
287 Say Y here if you intend to run this kernel on a
288 MIO A701. Currently there is only basic support
292 bool "Motorola EZX Platform"
296 select PXA_HAVE_BOARD_IRQS
299 bool "Motorola EZX A780"
304 bool "Motorola EZX E680"
308 config MACH_EZX_A1200
309 bool "Motorola EZX A1200"
314 bool "Motorola EZX A910"
319 bool "Motorola EZX E6"
324 bool "Motorola EZX E2"
329 bool "Nec Mobilepro 900/c"
333 bool "PXA based Palm PDAs"
337 bool "Palm Tungsten|E2"
339 depends on ARCH_PXA_PALM
342 Say Y here if you intend to run this kernel on a Palm Tungsten|E2
346 bool "Palm Tungsten|C"
348 depends on ARCH_PXA_PALM
351 Say Y here if you intend to run this kernel on a Palm Tungsten|C
355 bool "Palm Tungsten|T5"
357 depends on ARCH_PXA_PALM
361 Say Y here if you intend to run this kernel on a Palm Tungsten|T5
367 depends on ARCH_PXA_PALM
371 Say Y here if you intend to run this kernel on a Palm T|X
377 depends on ARCH_PXA_PALM
381 Say Y here if you intend to run this kernel on Palm Zire 72
385 bool "Palm LifeDrive"
387 depends on ARCH_PXA_PALM
391 Say Y here if you intend to run this kernel on a Palm LifeDrive
396 depends on ARCH_PXA_PALM
399 bool "Palm Centro 685 (GSM)"
401 depends on ARCH_PXA_PALM
406 Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
412 depends on ARCH_PXA_PALM
417 Say Y here if you intend to run this kernel on Palm Treo 680
420 config MACH_RAUMFELD_RC
421 bool "Raumfeld Controller"
426 config MACH_RAUMFELD_CONNECTOR
427 bool "Raumfeld Connector"
432 config MACH_RAUMFELD_SPEAKER
433 bool "Raumfeld Speaker"
439 bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
443 Say Y here if you intend to run this kernel on a
444 Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
445 SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
446 SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
453 config CORGI_SSP_DEPRECATED
457 This option will include corgi_ssp.c and corgi_lcd.c
458 that corgi_ts.c and other legacy drivers (corgi_bl.c
459 and sharpsl_pm.c) may depend on.
462 bool "Enable Sharp SL-5600 (Poodle) Support"
463 depends on PXA_SHARPSL
467 select PXA_HAVE_BOARD_IRQS
470 bool "Enable Sharp SL-C700 (Corgi) Support"
471 depends on PXA_SHARPSL
473 select PXA_SHARP_C7xx
476 bool "Enable Sharp SL-C750 (Shepherd) Support"
477 depends on PXA_SHARPSL
479 select PXA_SHARP_C7xx
482 bool "Enable Sharp SL-C760 (Husky) Support"
483 depends on PXA_SHARPSL
485 select PXA_SHARP_C7xx
488 bool "Enable Sharp SL-1000 (Akita) Support"
489 depends on PXA_SHARPSL
491 select PXA_SHARP_Cxx00
497 bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
498 depends on PXA_SHARPSL
500 select PXA_SHARP_Cxx00
503 bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
504 depends on PXA_SHARPSL
506 select PXA_SHARP_Cxx00
509 bool "Enable Sharp SL-6000x (Tosa) Support"
510 depends on PXA_SHARPSL
512 select PXA_HAVE_BOARD_IRQS
514 config ARCH_PXA_ESERIES
515 bool "PXA based Toshiba e-series PDAs"
517 select PXA_HAVE_BOARD_IRQS
522 depends on ARCH_PXA_ESERIES
524 Say Y here if you intend to run this kernel on a Toshiba
530 depends on ARCH_PXA_ESERIES
532 Say Y here if you intend to run this kernel on a Toshiba
538 depends on ARCH_PXA_ESERIES
541 Say Y here if you intend to run this kernel on a Toshiba
547 depends on ARCH_PXA_ESERIES
550 Say Y here if you intend to run this kernel on a Toshiba
556 depends on ARCH_PXA_ESERIES
558 Say Y here if you intend to run this kernel on a Toshiba
564 depends on ARCH_PXA_ESERIES
567 Say Y here if you intend to run this kernel on a Toshiba
576 Select code specific to PXA21x/25x/26x variants
582 Select code specific to PXA27x variants
588 Select code specific to PXA26x (codename Dalhart)
594 Select code specific to PXA3xx variants
600 PXA300 (codename Monahans-L)
606 PXA310 (codename Monahans-LV)
612 PXA320 (codename Monahans-P)
618 PXA930 (codename Tavor-P)
624 PXA935 (codename Tavor-P65)
630 PXA950 (codename Tavor-PV2)
632 config PXA_SHARP_C7xx
637 Enable support for all Sharp C7xx models
639 config PXA_SHARP_Cxx00
644 Enable common support for Sharp Cxx00 models
649 Enable support for PXA2xx SSP ports
652 tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
656 This is a simple driver that is able to control
657 the state of built in bluetooth chip on tosa.
659 config PXA_HAVE_BOARD_IRQS
662 config PXA_HAVE_ISA_IRQS