[net-next-2.6.git] / include / linux / serial.h

/*
 * include/linux/serial.h
 *
 * Copyright (C) 1992 by Theodore Ts'o.
 * 
 * Redistribution of this file is permitted under the terms of the GNU 
 * Public License (GPL)
 */

#ifndef _LINUX_SERIAL_H
#define _LINUX_SERIAL_H

#include <linux/types.h>

#ifdef __KERNEL__
#include <asm/page.h>

/*
 * Counters of the input lines (CTS, DSR, RI, CD) interrupts
 */

struct async_icount {
	__u32	cts, dsr, rng, dcd, tx, rx;
	__u32	frame, parity, overrun, brk;
	__u32	buf_overrun;
};

/*
 * The size of the serial xmit buffer is 1 page, or 4096 bytes
 */
#define SERIAL_XMIT_SIZE PAGE_SIZE

#endif

struct serial_struct {
	int	type;
	int	line;
	unsigned int	port;
	int	irq;
	int	flags;
	int	xmit_fifo_size;
	int	custom_divisor;
	int	baud_base;
	unsigned short	close_delay;
	char	io_type;
	char	reserved_char[1];
	int	hub6;
	unsigned short	closing_wait; /* time to wait before closing */
	unsigned short	closing_wait2; /* no longer used... */
	unsigned char	*iomem_base;
	unsigned short	iomem_reg_shift;
	unsigned int	port_high;
	unsigned long	iomap_base;	/* cookie passed into ioremap */
};

/*
 * For the close wait times, 0 means wait forever for serial port to
 * flush its output.  65535 means don't wait at all.
 */
#define ASYNC_CLOSING_WAIT_INF	0
#define ASYNC_CLOSING_WAIT_NONE	65535

/*
 * These are the supported serial types.
 */
#define PORT_UNKNOWN	0
#define PORT_8250	1
#define PORT_16450	2
#define PORT_16550	3
#define PORT_16550A	4
#define PORT_CIRRUS     5	/* usurped by cyclades.c */
#define PORT_16650	6
#define PORT_16650V2	7
#define PORT_16750	8
#define PORT_STARTECH	9	/* usurped by cyclades.c */
#define PORT_16C950	10	/* Oxford Semiconductor */
#define PORT_16654	11
#define PORT_16850	12
#define PORT_RSA	13	/* RSA-DV II/S card */
#define PORT_MAX	13

#define SERIAL_IO_PORT	0
#define SERIAL_IO_HUB6	1
#define SERIAL_IO_MEM	2

struct serial_uart_config {
	char	*name;
	int	dfl_xmit_fifo_size;
	int	flags;
};

#define UART_CLEAR_FIFO		0x01
#define UART_USE_FIFO		0x02
#define UART_STARTECH		0x04
#define UART_NATSEMI		0x08

/*
 * Definitions for async_struct (and serial_struct) flags field
 *
 * Define ASYNCB_* for convenient use with {test,set,clear}_bit.
 */
#define ASYNCB_HUP_NOTIFY	 0 /* Notify getty on hangups and closes
				    * on the callout port */
#define ASYNCB_FOURPORT		 1 /* Set OU1, OUT2 per AST Fourport settings */
#define ASYNCB_SAK		 2 /* Secure Attention Key (Orange book) */
#define ASYNCB_SPLIT_TERMIOS	 3 /* Separate termios for dialin/callout */
#define ASYNCB_SPD_HI		 4 /* Use 56000 instead of 38400 bps */
#define ASYNCB_SPD_VHI		 5 /* Use 115200 instead of 38400 bps */
#define ASYNCB_SKIP_TEST	 6 /* Skip UART test during autoconfiguration */
#define ASYNCB_AUTO_IRQ		 7 /* Do automatic IRQ during
				    * autoconfiguration */
#define ASYNCB_SESSION_LOCKOUT	 8 /* Lock out cua opens based on session */
#define ASYNCB_PGRP_LOCKOUT	 9 /* Lock out cua opens based on pgrp */
#define ASYNCB_CALLOUT_NOHUP	10 /* Don't do hangups for cua device */
#define ASYNCB_HARDPPS_CD	11 /* Call hardpps when CD goes high  */
#define ASYNCB_SPD_SHI		12 /* Use 230400 instead of 38400 bps */
#define ASYNCB_LOW_LATENCY	13 /* Request low latency behaviour */
#define ASYNCB_BUGGY_UART	14 /* This is a buggy UART, skip some safety
				    * checks.  Note: can be dangerous! */
#define ASYNCB_AUTOPROBE	15 /* Port was autoprobed by PCI or PNP code */
#define ASYNCB_LAST_USER	15

/* Internal flags used only by kernel */
#define ASYNCB_INITIALIZED	31 /* Serial port was initialized */
#define ASYNCB_SUSPENDED	30 /* Serial port is suspended */
#define ASYNCB_NORMAL_ACTIVE	29 /* Normal device is active */
#define ASYNCB_BOOT_AUTOCONF	28 /* Autoconfigure port on bootup */
#define ASYNCB_CLOSING		27 /* Serial port is closing */
#define ASYNCB_CTS_FLOW		26 /* Do CTS flow control */
#define ASYNCB_CHECK_CD		25 /* i.e., CLOCAL */
#define ASYNCB_SHARE_IRQ	24 /* for multifunction cards, no longer used */
#define ASYNCB_CONS_FLOW	23 /* flow control for console  */
#define ASYNCB_BOOT_ONLYMCA	22 /* Probe only if MCA bus */
#define ASYNCB_FIRST_KERNEL	22

#define ASYNC_HUP_NOTIFY	(1U << ASYNCB_HUP_NOTIFY)
#define ASYNC_SUSPENDED		(1U << ASYNCB_SUSPENDED)
#define ASYNC_FOURPORT		(1U << ASYNCB_FOURPORT)
#define ASYNC_SAK		(1U << ASYNCB_SAK)
#define ASYNC_SPLIT_TERMIOS	(1U << ASYNCB_SPLIT_TERMIOS)
#define ASYNC_SPD_HI		(1U << ASYNCB_SPD_HI)
#define ASYNC_SPD_VHI		(1U << ASYNCB_SPD_VHI)
#define ASYNC_SKIP_TEST		(1U << ASYNCB_SKIP_TEST)
#define ASYNC_AUTO_IRQ		(1U << ASYNCB_AUTO_IRQ)
#define ASYNC_SESSION_LOCKOUT	(1U << ASYNCB_SESSION_LOCKOUT)
#define ASYNC_PGRP_LOCKOUT	(1U << ASYNCB_PGRP_LOCKOUT)
#define ASYNC_CALLOUT_NOHUP	(1U << ASYNCB_CALLOUT_NOHUP)
#define ASYNC_HARDPPS_CD	(1U << ASYNCB_HARDPPS_CD)
#define ASYNC_SPD_SHI		(1U << ASYNCB_SPD_SHI)
#define ASYNC_LOW_LATENCY	(1U << ASYNCB_LOW_LATENCY)
#define ASYNC_BUGGY_UART	(1U << ASYNCB_BUGGY_UART)
#define ASYNC_AUTOPROBE		(1U << ASYNCB_AUTOPROBE)

#define ASYNC_FLAGS		((1U << (ASYNCB_LAST_USER + 1)) - 1)
#define ASYNC_USR_MASK		(ASYNC_SPD_HI|ASYNC_SPD_VHI| \
		ASYNC_CALLOUT_NOHUP|ASYNC_SPD_SHI|ASYNC_LOW_LATENCY)
#define ASYNC_SPD_CUST		(ASYNC_SPD_HI|ASYNC_SPD_VHI)
#define ASYNC_SPD_WARP		(ASYNC_SPD_HI|ASYNC_SPD_SHI)
#define ASYNC_SPD_MASK		(ASYNC_SPD_HI|ASYNC_SPD_VHI|ASYNC_SPD_SHI)

#define ASYNC_INITIALIZED	(1U << ASYNCB_INITIALIZED)
#define ASYNC_NORMAL_ACTIVE	(1U << ASYNCB_NORMAL_ACTIVE)
#define ASYNC_BOOT_AUTOCONF	(1U << ASYNCB_BOOT_AUTOCONF)
#define ASYNC_CLOSING		(1U << ASYNCB_CLOSING)
#define ASYNC_CTS_FLOW		(1U << ASYNCB_CTS_FLOW)
#define ASYNC_CHECK_CD		(1U << ASYNCB_CHECK_CD)
#define ASYNC_SHARE_IRQ		(1U << ASYNCB_SHARE_IRQ)
#define ASYNC_CONS_FLOW		(1U << ASYNCB_CONS_FLOW)
#define ASYNC_BOOT_ONLYMCA	(1U << ASYNCB_BOOT_ONLYMCA)
#define ASYNC_INTERNAL_FLAGS	(~((1U << ASYNCB_FIRST_KERNEL) - 1))

/*
 * Multiport serial configuration structure --- external structure
 */
struct serial_multiport_struct {
	int		irq;
	int		port1;
	unsigned char	mask1, match1;
	int		port2;
	unsigned char	mask2, match2;
	int		port3;
	unsigned char	mask3, match3;
	int		port4;
	unsigned char	mask4, match4;
	int		port_monitor;
	int	reserved[32];
};

/*
 * Serial input interrupt line counters -- external structure
 * Four lines can interrupt: CTS, DSR, RI, DCD
 */
struct serial_icounter_struct {
	int cts, dsr, rng, dcd;
	int rx, tx;
	int frame, overrun, parity, brk;
	int buf_overrun;
	int reserved[9];
};

/*
 * Serial interface for controlling RS485 settings on chips with suitable
 * support. Set with TIOCSRS485 and get with TIOCGRS485 if supported by your
 * platform. The set function returns the new state, with any unsupported bits
 * reverted appropriately.
 */

struct serial_rs485 {
	__u32	flags;			/* RS485 feature flags */
#define SER_RS485_ENABLED		(1 << 0)
#define SER_RS485_RTS_ON_SEND		(1 << 1)
#define SER_RS485_RTS_AFTER_SEND	(1 << 2)
#define SER_RS485_RTS_BEFORE_SEND	(1 << 3)
	__u32	delay_rts_before_send;	/* Milliseconds */
	__u32	delay_rts_after_send;	/* Milliseconds */
	__u32	padding[5];		/* Memory is cheap, new structs
					   are a royal PITA .. */
};

#ifdef __KERNEL__
#include <linux/compiler.h>

#endif /* __KERNEL__ */
#endif /* _LINUX_SERIAL_H */
Commit	Line	Data
1da177e4 LT	1	/*
	2	* include/linux/serial.h
	3	*
	4	* Copyright (C) 1992 by Theodore Ts'o.
	5	*
	6	* Redistribution of this file is permitted under the terms of the GNU
	7	* Public License (GPL)
	8	*/
	9
	10	#ifndef _LINUX_SERIAL_H
	11	#define _LINUX_SERIAL_H
	12
4e57b681	13	#include <linux/types.h>
60c20fb8 AW	14
60c20fb8 AW	15	#ifdef __KERNEL__
1da177e4 LT	16	#include <asm/page.h>
	17
	18	/*
	19	* Counters of the input lines (CTS, DSR, RI, CD) interrupts
	20	*/
	21
	22	struct async_icount {
	23	__u32 cts, dsr, rng, dcd, tx, rx;
	24	__u32 frame, parity, overrun, brk;
	25	__u32 buf_overrun;
	26	};
	27
	28	/*
	29	* The size of the serial xmit buffer is 1 page, or 4096 bytes
	30	*/
	31	#define SERIAL_XMIT_SIZE PAGE_SIZE
	32
	33	#endif
	34
	35	struct serial_struct {
	36	int type;
	37	int line;
	38	unsigned int port;
	39	int irq;
	40	int flags;
	41	int xmit_fifo_size;
	42	int custom_divisor;
	43	int baud_base;
	44	unsigned short close_delay;
	45	char io_type;
	46	char reserved_char[1];
	47	int hub6;
	48	unsigned short closing_wait; /* time to wait before closing */
	49	unsigned short closing_wait2; /* no longer used... */
	50	unsigned char *iomem_base;
	51	unsigned short iomem_reg_shift;
	52	unsigned int port_high;
	53	unsigned long iomap_base; /* cookie passed into ioremap */
	54	};
	55
	56	/*
	57	* For the close wait times, 0 means wait forever for serial port to
	58	* flush its output. 65535 means don't wait at all.
	59	*/
	60	#define ASYNC_CLOSING_WAIT_INF 0
	61	#define ASYNC_CLOSING_WAIT_NONE 65535
	62
	63	/*
	64	* These are the supported serial types.
	65	*/
	66	#define PORT_UNKNOWN 0
	67	#define PORT_8250 1
	68	#define PORT_16450 2
	69	#define PORT_16550 3
	70	#define PORT_16550A 4
	71	#define PORT_CIRRUS 5 /* usurped by cyclades.c */
	72	#define PORT_16650 6
	73	#define PORT_16650V2 7
	74	#define PORT_16750 8
	75	#define PORT_STARTECH 9 /* usurped by cyclades.c */
	76	#define PORT_16C950 10 /* Oxford Semiconductor */
	77	#define PORT_16654 11
	78	#define PORT_16850 12
	79	#define PORT_RSA 13 /* RSA-DV II/S card */
71cad055	80	#define PORT_MAX 13
1da177e4 LT	81
	82	#define SERIAL_IO_PORT 0
	83	#define SERIAL_IO_HUB6 1
	84	#define SERIAL_IO_MEM 2
	85
	86	struct serial_uart_config {
	87	char *name;
	88	int dfl_xmit_fifo_size;
	89	int flags;
	90	};
	91
	92	#define UART_CLEAR_FIFO 0x01
	93	#define UART_USE_FIFO 0x02
	94	#define UART_STARTECH 0x04
	95	#define UART_NATSEMI 0x08
	96
	97	/*
	98	* Definitions for async_struct (and serial_struct) flags field
70beaed2 JS	99	*
70beaed2 JS	100	* Define ASYNCB_* for convenient use with {test,set,clear}_bit.
1da177e4	101	*/
70beaed2 JS	102	#define ASYNCB_HUP_NOTIFY 0 /* Notify getty on hangups and closes
	103	* on the callout port */
	104	#define ASYNCB_FOURPORT 1 /* Set OU1, OUT2 per AST Fourport settings */
	105	#define ASYNCB_SAK 2 /* Secure Attention Key (Orange book) */
	106	#define ASYNCB_SPLIT_TERMIOS 3 /* Separate termios for dialin/callout */
	107	#define ASYNCB_SPD_HI 4 /* Use 56000 instead of 38400 bps */
	108	#define ASYNCB_SPD_VHI 5 /* Use 115200 instead of 38400 bps */
	109	#define ASYNCB_SKIP_TEST 6 /* Skip UART test during autoconfiguration */
	110	#define ASYNCB_AUTO_IRQ 7 /* Do automatic IRQ during
	111	* autoconfiguration */
	112	#define ASYNCB_SESSION_LOCKOUT 8 /* Lock out cua opens based on session */
	113	#define ASYNCB_PGRP_LOCKOUT 9 /* Lock out cua opens based on pgrp */
	114	#define ASYNCB_CALLOUT_NOHUP 10 /* Don't do hangups for cua device */
	115	#define ASYNCB_HARDPPS_CD 11 /* Call hardpps when CD goes high */
	116	#define ASYNCB_SPD_SHI 12 /* Use 230400 instead of 38400 bps */
	117	#define ASYNCB_LOW_LATENCY 13 /* Request low latency behaviour */
	118	#define ASYNCB_BUGGY_UART 14 /* This is a buggy UART, skip some safety
	119	* checks. Note: can be dangerous! */
	120	#define ASYNCB_AUTOPROBE 15 /* Port was autoprobed by PCI or PNP code */
	121	#define ASYNCB_LAST_USER 15
	122
	123	/* Internal flags used only by kernel */
	124	#define ASYNCB_INITIALIZED 31 /* Serial port was initialized */
ccce6deb	125	#define ASYNCB_SUSPENDED 30 /* Serial port is suspended */
70beaed2 JS	126	#define ASYNCB_NORMAL_ACTIVE 29 /* Normal device is active */
	127	#define ASYNCB_BOOT_AUTOCONF 28 /* Autoconfigure port on bootup */
	128	#define ASYNCB_CLOSING 27 /* Serial port is closing */
	129	#define ASYNCB_CTS_FLOW 26 /* Do CTS flow control */
	130	#define ASYNCB_CHECK_CD 25 /* i.e., CLOCAL */
	131	#define ASYNCB_SHARE_IRQ 24 /* for multifunction cards, no longer used */
	132	#define ASYNCB_CONS_FLOW 23 /* flow control for console */
	133	#define ASYNCB_BOOT_ONLYMCA 22 /* Probe only if MCA bus */
	134	#define ASYNCB_FIRST_KERNEL 22
	135
	136	#define ASYNC_HUP_NOTIFY (1U << ASYNCB_HUP_NOTIFY)
ccce6deb	137	#define ASYNC_SUSPENDED (1U << ASYNCB_SUSPENDED)
70beaed2 JS	138	#define ASYNC_FOURPORT (1U << ASYNCB_FOURPORT)
	139	#define ASYNC_SAK (1U << ASYNCB_SAK)
	140	#define ASYNC_SPLIT_TERMIOS (1U << ASYNCB_SPLIT_TERMIOS)
	141	#define ASYNC_SPD_HI (1U << ASYNCB_SPD_HI)
	142	#define ASYNC_SPD_VHI (1U << ASYNCB_SPD_VHI)
	143	#define ASYNC_SKIP_TEST (1U << ASYNCB_SKIP_TEST)
	144	#define ASYNC_AUTO_IRQ (1U << ASYNCB_AUTO_IRQ)
	145	#define ASYNC_SESSION_LOCKOUT (1U << ASYNCB_SESSION_LOCKOUT)
	146	#define ASYNC_PGRP_LOCKOUT (1U << ASYNCB_PGRP_LOCKOUT)
	147	#define ASYNC_CALLOUT_NOHUP (1U << ASYNCB_CALLOUT_NOHUP)
	148	#define ASYNC_HARDPPS_CD (1U << ASYNCB_HARDPPS_CD)
	149	#define ASYNC_SPD_SHI (1U << ASYNCB_SPD_SHI)
	150	#define ASYNC_LOW_LATENCY (1U << ASYNCB_LOW_LATENCY)
	151	#define ASYNC_BUGGY_UART (1U << ASYNCB_BUGGY_UART)
	152	#define ASYNC_AUTOPROBE (1U << ASYNCB_AUTOPROBE)
	153
93e3d582	154	#define ASYNC_FLAGS ((1U << (ASYNCB_LAST_USER + 1)) - 1)
70beaed2 JS	155	#define ASYNC_USR_MASK (ASYNC_SPD_HI\|ASYNC_SPD_VHI\| \
	156	ASYNC_CALLOUT_NOHUP\|ASYNC_SPD_SHI\|ASYNC_LOW_LATENCY)
	157	#define ASYNC_SPD_CUST (ASYNC_SPD_HI\|ASYNC_SPD_VHI)
	158	#define ASYNC_SPD_WARP (ASYNC_SPD_HI\|ASYNC_SPD_SHI)
	159	#define ASYNC_SPD_MASK (ASYNC_SPD_HI\|ASYNC_SPD_VHI\|ASYNC_SPD_SHI)
	160
	161	#define ASYNC_INITIALIZED (1U << ASYNCB_INITIALIZED)
	162	#define ASYNC_NORMAL_ACTIVE (1U << ASYNCB_NORMAL_ACTIVE)
	163	#define ASYNC_BOOT_AUTOCONF (1U << ASYNCB_BOOT_AUTOCONF)
	164	#define ASYNC_CLOSING (1U << ASYNCB_CLOSING)
	165	#define ASYNC_CTS_FLOW (1U << ASYNCB_CTS_FLOW)
	166	#define ASYNC_CHECK_CD (1U << ASYNCB_CHECK_CD)
	167	#define ASYNC_SHARE_IRQ (1U << ASYNCB_SHARE_IRQ)
	168	#define ASYNC_CONS_FLOW (1U << ASYNCB_CONS_FLOW)
	169	#define ASYNC_BOOT_ONLYMCA (1U << ASYNCB_BOOT_ONLYMCA)
	170	#define ASYNC_INTERNAL_FLAGS (~((1U << ASYNCB_FIRST_KERNEL) - 1))
1da177e4 LT	171
	172	/*
	173	* Multiport serial configuration structure --- external structure
	174	*/
	175	struct serial_multiport_struct {
	176	int irq;
	177	int port1;
	178	unsigned char mask1, match1;
	179	int port2;
	180	unsigned char mask2, match2;
	181	int port3;
	182	unsigned char mask3, match3;
	183	int port4;
	184	unsigned char mask4, match4;
	185	int port_monitor;
	186	int reserved[32];
	187	};
	188
	189	/*
	190	* Serial input interrupt line counters -- external structure
	191	* Four lines can interrupt: CTS, DSR, RI, DCD
	192	*/
	193	struct serial_icounter_struct {
	194	int cts, dsr, rng, dcd;
	195	int rx, tx;
	196	int frame, overrun, parity, brk;
	197	int buf_overrun;
	198	int reserved[9];
	199	};
	200
c26c56c0 AC	201	/*
	202	* Serial interface for controlling RS485 settings on chips with suitable
	203	* support. Set with TIOCSRS485 and get with TIOCGRS485 if supported by your
	204	* platform. The set function returns the new state, with any unsupported bits
	205	* reverted appropriately.
	206	*/
	207
	208	struct serial_rs485 {
	209	__u32 flags; /* RS485 feature flags */
	210	#define SER_RS485_ENABLED (1 << 0)
	211	#define SER_RS485_RTS_ON_SEND (1 << 1)
	212	#define SER_RS485_RTS_AFTER_SEND (1 << 2)
1b633184	213	#define SER_RS485_RTS_BEFORE_SEND (1 << 3)
c26c56c0	214	__u32 delay_rts_before_send; /* Milliseconds */
1b633184 CS	215	__u32 delay_rts_after_send; /* Milliseconds */
1b633184 CS	216	__u32 padding[5]; /* Memory is cheap, new structs
c26c56c0 AC	217	are a royal PITA .. */
c26c56c0 AC	218	};
1da177e4 LT	219
1da177e4 LT	220	#ifdef __KERNEL__
661f83a6 RK	221	#include <linux/compiler.h>
661f83a6 RK	222
1da177e4 LT	223	#endif /* __KERNEL__ */
1da177e4 LT	224	#endif /* _LINUX_SERIAL_H */