]> bbs.cooldavid.org Git - net-next-2.6.git/blame - drivers/serial/serial_cs.c
git://bbs.cooldavid.org / net-next-2.6.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
pcnet_cs: add new id (TOSHIBA Modem/LAN Card)
[net-next-2.6.git] / drivers / serial / serial_cs.c
CommitLineData
1da177e4
LT		 1/*======================================================================
2
3 A driver for PCMCIA serial devices
4
5 serial_cs.c 1.134 2002/05/04 05:48:53
6
7 The contents of this file are subject to the Mozilla Public
8 License Version 1.1 (the "License"); you may not use this file
9 except in compliance with the License. You may obtain a copy of
10 the License at http://www.mozilla.org/MPL/
11
12 Software distributed under the License is distributed on an "AS
13 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
14 implied. See the License for the specific language governing
15 rights and limitations under the License.
16
17 The initial developer of the original code is David A. Hinds
18 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
19 are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
20
21 Alternatively, the contents of this file may be used under the
22 terms of the GNU General Public License version 2 (the "GPL"), in which
23 case the provisions of the GPL are applicable instead of the
24 above. If you wish to allow the use of your version of this file
25 only under the terms of the GPL and not to allow others to use
26 your version of this file under the MPL, indicate your decision
27 by deleting the provisions above and replace them with the notice
28 and other provisions required by the GPL. If you do not delete
29 the provisions above, a recipient may use your version of this
30 file under either the MPL or the GPL.
31
32======================================================================*/
33
34#include <linux/module.h>
35#include <linux/moduleparam.h>
36#include <linux/kernel.h>
37#include <linux/init.h>
1da177e4
LT		 38#include <linux/ptrace.h>
39#include <linux/slab.h>
40#include <linux/string.h>
41#include <linux/timer.h>
42#include <linux/serial_core.h>
30bac7aa 43#include <linux/delay.h>
1da177e4
LT		 44#include <linux/major.h>
45#include <asm/io.h>
46#include <asm/system.h>
47
1da177e4
LT		 48#include <pcmcia/cs_types.h>
49#include <pcmcia/cs.h>
50#include <pcmcia/cistpl.h>
51#include <pcmcia/ciscode.h>
52#include <pcmcia/ds.h>
53#include <pcmcia/cisreg.h>
54
55#include "8250.h"
56
1da177e4
LT		 57
58/*====================================================================*/
59
60/* Parameters that can be set with 'insmod' */
61
62/* Enable the speaker? */
63static int do_sound = 1;
64/* Skip strict UART tests? */
65static int buggy_uart;
66
67module_param(do_sound, int, 0444);
68module_param(buggy_uart, int, 0444);
69
70/*====================================================================*/
71
72/* Table of multi-port card ID's */
73
1fbbac4b 74struct serial_quirk {
a8244b56
RK		 75 unsigned int manfid;
76 unsigned int prodid;
1da177e4 77 int multi; /* 1 = multifunction, > 1 = # ports */
efd92dfa 78 void (*config)(struct pcmcia_device *);
f3d10688 79 void (*setup)(struct pcmcia_device *, struct uart_port *);
7ef057fa 80 void (*wakeup)(struct pcmcia_device *);
eee3a883 81 int (*post)(struct pcmcia_device *);
1da177e4
LT		 82};
83
eee3a883
RK		 84struct serial_info {
85 struct pcmcia_device *p_dev;
86 int ndev;
87 int multi;
88 int slave;
89 int manfid;
90 int prodid;
91 int c950ctrl;
eee3a883
RK		 92 int line[4];
93 const struct serial_quirk *quirk;
94};
95
96struct serial_cfg_mem {
97 tuple_t tuple;
98 cisparse_t parse;
99 u_char buf[256];
100};
101
f3d10688
RK		 102/*
103 * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6"
104 * manfid 0x0160, 0x0104
105 * This card appears to have a 14.7456MHz clock.
106 */
6f4567c8
TM		 107/* Generic Modem: MD55x (GPRS/EDGE) have
108 * Elan VPU16551 UART with 14.7456MHz oscillator
109 * manfid 0x015D, 0x4C45
110 */
f3d10688
RK		 111static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port)
112{
113 port->uartclk = 14745600;
114}
115
eee3a883
RK		 116static int quirk_post_ibm(struct pcmcia_device *link)
117{
118 conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
9ec0bf41
DB		 119 int ret;
120
121 ret = pcmcia_access_configuration_register(link, &reg);
122 if (ret)
123 goto failed;
eee3a883 124
eee3a883
RK		 125 reg.Action = CS_WRITE;
126 reg.Value = reg.Value | 1;
9ec0bf41
DB		 127 ret = pcmcia_access_configuration_register(link, &reg);
128 if (ret)
129 goto failed;
eee3a883
RK		 130 return 0;
131
9ec0bf41 132 failed:
eee3a883
RK		 133 return -ENODEV;
134}
135
20f13049
RK		 136/*
137 * Nokia cards are not really multiport cards. Shouldn't this
138 * be handled by setting the quirk entry .multi = 0 | 1 ?
139 */
140static void quirk_config_nokia(struct pcmcia_device *link)
141{
142 struct serial_info *info = link->priv;
143
144 if (info->multi > 1)
145 info->multi = 1;
146}
147
7ef057fa
RK		 148static void quirk_wakeup_oxsemi(struct pcmcia_device *link)
149{
150 struct serial_info *info = link->priv;
151
18c576f9
PM		 152 if (info->c950ctrl)
153 outb(12, info->c950ctrl + 1);
7ef057fa
RK		 154}
155
156/* request_region? oxsemi branch does no request_region too... */
157/*
158 * This sequence is needed to properly initialize MC45 attached to OXCF950.
159 * I tried decreasing these msleep()s, but it worked properly (survived
160 * 1000 stop/start operations) with these timeouts (or bigger).
161 */
162static void quirk_wakeup_possio_gcc(struct pcmcia_device *link)
163{
164 struct serial_info *info = link->priv;
165 unsigned int ctrl = info->c950ctrl;
166
167 outb(0xA, ctrl + 1);
168 msleep(100);
169 outb(0xE, ctrl + 1);
170 msleep(300);
171 outb(0xC, ctrl + 1);
172 msleep(100);
173 outb(0xE, ctrl + 1);
174 msleep(200);
175 outb(0xF, ctrl + 1);
176 msleep(100);
177 outb(0xE, ctrl + 1);
178 msleep(100);
179 outb(0xC, ctrl + 1);
180}
181
efd92dfa
RK		 182/*
183 * Socket Dual IO: this enables irq's for second port
184 */
185static void quirk_config_socket(struct pcmcia_device *link)
186{
187 struct serial_info *info = link->priv;
188
189 if (info->multi) {
190 link->conf.Present |= PRESENT_EXT_STATUS;
191 link->conf.ExtStatus = ESR_REQ_ATTN_ENA;
192 }
193}
194
1fbbac4b
RK		 195static const struct serial_quirk quirks[] = {
196 {
f3d10688
RK		 197 .manfid = 0x0160,
198 .prodid = 0x0104,
199 .multi = -1,
200 .setup = quirk_setup_brainboxes_0104,
6f4567c8
TM		 201 }, {
202 .manfid = 0x015D,
203 .prodid = 0x4C45,
204 .multi = -1,
205 .setup = quirk_setup_brainboxes_0104,
f3d10688 206 }, {
eee3a883
RK		 207 .manfid = MANFID_IBM,
208 .prodid = ~0,
209 .multi = -1,
210 .post = quirk_post_ibm,
7ef057fa
RK		 211 }, {
212 .manfid = MANFID_INTEL,
213 .prodid = PRODID_INTEL_DUAL_RS232,
214 .multi = 2,
215 }, {
216 .manfid = MANFID_NATINST,
217 .prodid = PRODID_NATINST_QUAD_RS232,
218 .multi = 4,
20f13049
RK		 219 }, {
220 .manfid = MANFID_NOKIA,
221 .prodid = ~0,
222 .multi = -1,
223 .config = quirk_config_nokia,
eee3a883 224 }, {
1fbbac4b
RK		 225 .manfid = MANFID_OMEGA,
226 .prodid = PRODID_OMEGA_QSP_100,
227 .multi = 4,
7ef057fa
RK		 228 }, {
229 .manfid = MANFID_OXSEMI,
230 .prodid = ~0,
231 .multi = -1,
232 .wakeup = quirk_wakeup_oxsemi,
233 }, {
234 .manfid = MANFID_POSSIO,
235 .prodid = PRODID_POSSIO_GCC,
236 .multi = -1,
237 .wakeup = quirk_wakeup_possio_gcc,
1fbbac4b
RK		 238 }, {
239 .manfid = MANFID_QUATECH,
240 .prodid = PRODID_QUATECH_DUAL_RS232,
241 .multi = 2,
242 }, {
243 .manfid = MANFID_QUATECH,
244 .prodid = PRODID_QUATECH_DUAL_RS232_D1,
245 .multi = 2,
bb289bc4
SO		 246 }, {
247 .manfid = MANFID_QUATECH,
248 .prodid = PRODID_QUATECH_DUAL_RS232_G,
249 .multi = 2,
1fbbac4b
RK		 250 }, {
251 .manfid = MANFID_QUATECH,
252 .prodid = PRODID_QUATECH_QUAD_RS232,
253 .multi = 4,
254 }, {
255 .manfid = MANFID_SOCKET,
256 .prodid = PRODID_SOCKET_DUAL_RS232,
257 .multi = 2,
efd92dfa
RK		 258 .config = quirk_config_socket,
259 }, {
260 .manfid = MANFID_SOCKET,
261 .prodid = ~0,
262 .multi = -1,
263 .config = quirk_config_socket,
1fbbac4b 264 }
1da177e4 265};
1da177e4 266
16f31113 267
15b99ac1 268static int serial_config(struct pcmcia_device * link);
1da177e4 269
1da177e4 270
1da177e4
LT		 271/*======================================================================
272
273 After a card is removed, serial_remove() will unregister
274 the serial device(s), and release the PCMCIA configuration.
275
276======================================================================*/
277
fba395ee 278static void serial_remove(struct pcmcia_device *link)
1da177e4
LT		 279{
280 struct serial_info *info = link->priv;
281 int i;
282
9ec0bf41 283 dev_dbg(&link->dev, "serial_release\n");
1da177e4
LT		 284
285 /*
286 * Recheck to see if the device is still configured.
287 */
e2d40963
DB		 288 for (i = 0; i < info->ndev; i++)
289 serial8250_unregister_port(info->line[i]);
1da177e4 290
e2d40963
DB		 291 if (!info->slave)
292 pcmcia_disable_device(link);
1da177e4
LT		 293}
294
fba395ee 295static int serial_suspend(struct pcmcia_device *link)
1da177e4 296{
e2d40963
DB		 297 struct serial_info *info = link->priv;
298 int i;
1da177e4 299
e2d40963
DB		 300 for (i = 0; i < info->ndev; i++)
301 serial8250_suspend_port(info->line[i]);
98e4c28b
DB		 302
303 return 0;
1da177e4
LT		 304}
305
fba395ee 306static int serial_resume(struct pcmcia_device *link)
1da177e4 307{
fe59d537
RK		 308 struct serial_info *info = link->priv;
309 int i;
1da177e4 310
fe59d537
RK		 311 for (i = 0; i < info->ndev; i++)
312 serial8250_resume_port(info->line[i]);
7ef057fa 313
fe59d537
RK		 314 if (info->quirk && info->quirk->wakeup)
315 info->quirk->wakeup(link);
98e4c28b
DB		 316
317 return 0;
1da177e4
LT		 318}
319
320/*======================================================================
321
322 serial_attach() creates an "instance" of the driver, allocating
323 local data structures for one device. The device is registered
324 with Card Services.
325
326======================================================================*/
327
fba395ee 328static int serial_probe(struct pcmcia_device *link)
1da177e4
LT		 329{
330 struct serial_info *info;
1da177e4 331
9ec0bf41 332 dev_dbg(&link->dev, "serial_attach()\n");
1da177e4
LT		 333
334 /* Create new serial device */
8f31bb39 335 info = kzalloc(sizeof (*info), GFP_KERNEL);
1da177e4 336 if (!info)
f8cfa618 337 return -ENOMEM;
fba395ee 338 info->p_dev = link;
1da177e4
LT		 339 link->priv = info;
340
341 link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
342 link->io.NumPorts1 = 8;
1da177e4
LT		 343 link->conf.Attributes = CONF_ENABLE_IRQ;
344 if (do_sound) {
345 link->conf.Attributes |= CONF_ENABLE_SPKR;
346 link->conf.Status = CCSR_AUDIO_ENA;
347 }
348 link->conf.IntType = INT_MEMORY_AND_IO;
349
15b99ac1 350 return serial_config(link);
1da177e4
LT		 351}
352
353/*======================================================================
354
355 This deletes a driver "instance". The device is de-registered
356 with Card Services. If it has been released, all local data
357 structures are freed. Otherwise, the structures will be freed
358 when the device is released.
359
360======================================================================*/
361
fba395ee 362static void serial_detach(struct pcmcia_device *link)
1da177e4
LT		 363{
364 struct serial_info *info = link->priv;
1da177e4 365
9ec0bf41 366 dev_dbg(&link->dev, "serial_detach\n");
1da177e4 367
1da177e4
LT		 368 /*
369 * Ensure any outstanding scheduled tasks are completed.
370 */
371 flush_scheduled_work();
372
373 /*
374 * Ensure that the ports have been released.
375 */
376 serial_remove(link);
377
b4635811 378 /* free bits */
1da177e4
LT		 379 kfree(info);
380}
381
382/*====================================================================*/
383
fba395ee 384static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
906da809 385 unsigned int iobase, int irq)
1da177e4
LT		 386{
387 struct uart_port port;
388 int line;
389
390 memset(&port, 0, sizeof (struct uart_port));
391 port.iobase = iobase;
392 port.irq = irq;
393 port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
394 port.uartclk = 1843200;
dd2e5a15 395 port.dev = &handle->dev;
1da177e4
LT		 396 if (buggy_uart)
397 port.flags |= UPF_BUGGY_UART;
f3d10688
RK		 398
399 if (info->quirk && info->quirk->setup)
400 info->quirk->setup(handle, &port);
401
1da177e4
LT		 402 line = serial8250_register_port(&port);
403 if (line < 0) {
404 printk(KERN_NOTICE "serial_cs: serial8250_register_port() at "
405 "0x%04lx, irq %d failed\n", (u_long)iobase, irq);
406 return -EINVAL;
407 }
408
409 info->line[info->ndev] = line;
1da177e4
LT		 410 info->ndev++;
411
412 return 0;
413}
414
415/*====================================================================*/
416
84e2d340
DB		 417static int simple_config_check(struct pcmcia_device *p_dev,
418 cistpl_cftable_entry_t *cf,
8e2fc39d 419 cistpl_cftable_entry_t *dflt,
ad913c11 420 unsigned int vcc,
84e2d340 421 void *priv_data)
1da177e4 422{
84e2d340
DB		 423 static const int size_table[2] = { 8, 16 };
424 int *try = priv_data;
425
426 if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
427 p_dev->conf.Vpp =
428 cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
429
430 if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)])
431 && (cf->io.win[0].base != 0)) {
84e2d340
DB		 432 p_dev->io.BasePort1 = cf->io.win[0].base;
433 p_dev->io.IOAddrLines = ((*try & 0x1) == 0) ?
434 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
435 if (!pcmcia_request_io(p_dev, &p_dev->io))
436 return 0;
437 }
438 return -EINVAL;
1da177e4
LT		 439}
440
84e2d340
DB		 441static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
442 cistpl_cftable_entry_t *cf,
8e2fc39d 443 cistpl_cftable_entry_t *dflt,
ad913c11 444 unsigned int vcc,
84e2d340
DB		 445 void *priv_data)
446{
447 static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
448 int j;
449
450 if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
84e2d340
DB		 451 for (j = 0; j < 5; j++) {
452 p_dev->io.BasePort1 = base[j];
453 p_dev->io.IOAddrLines = base[j] ? 16 : 3;
454 if (!pcmcia_request_io(p_dev, &p_dev->io))
455 return 0;
456 }
457 }
458 return -ENODEV;
459}
1da177e4 460
fba395ee 461static int simple_config(struct pcmcia_device *link)
1da177e4 462{
1da177e4 463 struct serial_info *info = link->priv;
ef313e36 464 int i = -ENODEV, try;
16f31113 465
1da177e4 466 /* If the card is already configured, look up the port and irq */
ef313e36 467 if (link->function_config) {
906da809 468 unsigned int port = 0;
ef313e36
DB		 469 if ((link->io.BasePort2 != 0) &&
470 (link->io.NumPorts2 == 8)) {
471 port = link->io.BasePort2;
1da177e4
LT		 472 info->slave = 1;
473 } else if ((info->manfid == MANFID_OSITECH) &&
ef313e36
DB		 474 (link->io.NumPorts1 == 0x40)) {
475 port = link->io.BasePort1 + 0x28;
1da177e4
LT		 476 info->slave = 1;
477 }
16f31113 478 if (info->slave) {
ef313e36 479 return setup_serial(link, info, port,
eb14120f 480 link->irq);
16f31113 481 }
1da177e4 482 }
1da177e4 483
84e2d340
DB		 484 /* First pass: look for a config entry that looks normal.
485 * Two tries: without IO aliases, then with aliases */
486 for (try = 0; try < 4; try++)
487 if (!pcmcia_loop_config(link, simple_config_check, &try))
488 goto found_port;
489
1da177e4
LT		 490 /* Second pass: try to find an entry that isn't picky about
491 its base address, then try to grab any standard serial port
492 address, and finally try to get any free port. */
84e2d340
DB		 493 if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
494 goto found_port;
1da177e4 495
84e2d340
DB		 496 printk(KERN_NOTICE
497 "serial_cs: no usable port range found, giving up\n");
84e2d340 498 return -1;
1da177e4 499
84e2d340 500found_port:
1da177e4
LT		 501 if (info->multi && (info->manfid == MANFID_3COM))
502 link->conf.ConfigIndex &= ~(0x08);
efd92dfa
RK		 503
504 /*
505 * Apply any configuration quirks.
506 */
507 if (info->quirk && info->quirk->config)
508 info->quirk->config(link);
509
fba395ee 510 i = pcmcia_request_configuration(link, &link->conf);
9ec0bf41 511 if (i != 0)
1da177e4 512 return -1;
eb14120f 513 return setup_serial(link, info, link->io.BasePort1, link->irq);
1da177e4
LT		 514}
515
84e2d340
DB		 516static int multi_config_check(struct pcmcia_device *p_dev,
517 cistpl_cftable_entry_t *cf,
8e2fc39d 518 cistpl_cftable_entry_t *dflt,
ad913c11 519 unsigned int vcc,
84e2d340 520 void *priv_data)
1da177e4 521{
84e2d340
DB		 522 int *base2 = priv_data;
523
524 /* The quad port cards have bad CIS's, so just look for a
525 window larger than 8 ports and assume it will be right */
526 if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
84e2d340
DB		 527 p_dev->io.BasePort1 = cf->io.win[0].base;
528 p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
529 if (!pcmcia_request_io(p_dev, &p_dev->io)) {
530 *base2 = p_dev->io.BasePort1 + 8;
531 return 0;
532 }
533 }
534 return -ENODEV;
535}
16f31113 536
84e2d340
DB		 537static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
538 cistpl_cftable_entry_t *cf,
8e2fc39d 539 cistpl_cftable_entry_t *dflt,
ad913c11 540 unsigned int vcc,
84e2d340
DB		 541 void *priv_data)
542{
543 int *base2 = priv_data;
544
545 if (cf->io.nwin == 2) {
84e2d340
DB		 546 p_dev->io.BasePort1 = cf->io.win[0].base;
547 p_dev->io.BasePort2 = cf->io.win[1].base;
548 p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
549 if (!pcmcia_request_io(p_dev, &p_dev->io)) {
550 *base2 = p_dev->io.BasePort2;
551 return 0;
552 }
553 }
554 return -ENODEV;
555}
1da177e4 556
84e2d340
DB		 557static int multi_config(struct pcmcia_device *link)
558{
559 struct serial_info *info = link->priv;
560 int i, base2 = 0;
1da177e4
LT		 561
562 /* First, look for a generic full-sized window */
563 link->io.NumPorts1 = info->multi * 8;
84e2d340
DB		 564 if (pcmcia_loop_config(link, multi_config_check, &base2)) {
565 /* If that didn't work, look for two windows */
1da177e4
LT		 566 link->io.NumPorts1 = link->io.NumPorts2 = 8;
567 info->multi = 2;
84e2d340
DB		 568 if (pcmcia_loop_config(link, multi_config_check_notpicky,
569 &base2)) {
570 printk(KERN_NOTICE "serial_cs: no usable port range"
571 "found, giving up\n");
572 return -ENODEV;
1da177e4
LT		 573 }
574 }
575
eb14120f
DB		 576 if (!link->irq)
577 dev_warn(&link->dev,
578 "serial_cs: no usable IRQ found, continuing...\n");
efd92dfa
RK		 579
580 /*
581 * Apply any configuration quirks.
582 */
583 if (info->quirk && info->quirk->config)
584 info->quirk->config(link);
585
fba395ee 586 i = pcmcia_request_configuration(link, &link->conf);
9ec0bf41 587 if (i != 0)
84e2d340 588 return -ENODEV;
1da177e4
LT		 589
590 /* The Oxford Semiconductor OXCF950 cards are in fact single-port:
30bac7aa
PV		 591 * 8 registers are for the UART, the others are extra registers.
592 * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too.
593 */
594 if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO &&
595 info->prodid == PRODID_POSSIO_GCC)) {
596 int err;
597
84e2d340
DB		 598 if (link->conf.ConfigIndex == 1 ||
599 link->conf.ConfigIndex == 3) {
30bac7aa 600 err = setup_serial(link, info, base2,
eb14120f 601 link->irq);
30bac7aa 602 base2 = link->io.BasePort1;
1da177e4 603 } else {
30bac7aa 604 err = setup_serial(link, info, link->io.BasePort1,
eb14120f 605 link->irq);
1da177e4 606 }
30bac7aa 607 info->c950ctrl = base2;
7ef057fa
RK		 608
609 /*
610 * FIXME: We really should wake up the port prior to
611 * handing it over to the serial layer.
612 */
613 if (info->quirk && info->quirk->wakeup)
614 info->quirk->wakeup(link);
615
84e2d340 616 return 0;
1da177e4
LT		 617 }
618
eb14120f 619 setup_serial(link, info, link->io.BasePort1, link->irq);
1da177e4 620 for (i = 0; i < info->multi - 1; i++)
fba395ee 621 setup_serial(link, info, base2 + (8 * i),
eb14120f 622 link->irq);
84e2d340 623 return 0;
1da177e4
LT		 624}
625
6ae3b84d
DB		 626static int serial_check_for_multi(struct pcmcia_device *p_dev,
627 cistpl_cftable_entry_t *cf,
628 cistpl_cftable_entry_t *dflt,
629 unsigned int vcc,
630 void *priv_data)
631{
632 struct serial_info *info = p_dev->priv;
633
634 if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
635 info->multi = cf->io.win[0].len >> 3;
636
637 if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
638 (cf->io.win[1].len == 8))
639 info->multi = 2;
640
641 return 0; /* break */
642}
643
644
1da177e4
LT		 645/*======================================================================
646
647 serial_config() is scheduled to run after a CARD_INSERTION event
648 is received, to configure the PCMCIA socket, and to make the
649 serial device available to the system.
650
651======================================================================*/
652
15b99ac1 653static int serial_config(struct pcmcia_device * link)
1da177e4 654{
1da177e4 655 struct serial_info *info = link->priv;
6ae3b84d 656 int i;
16f31113 657
9ec0bf41 658 dev_dbg(&link->dev, "serial_config\n");
f0a3a153 659
1da177e4 660 /* Is this a compliant multifunction card? */
6ae3b84d 661 info->multi = (link->socket->functions > 1);
1da177e4
LT		 662
663 /* Is this a multiport card? */
efd50585
DB		 664 info->manfid = link->manf_id;
665 info->prodid = link->card_id;
666
667 for (i = 0; i < ARRAY_SIZE(quirks); i++)
668 if ((quirks[i].manfid == ~0 ||
669 quirks[i].manfid == info->manfid) &&
670 (quirks[i].prodid == ~0 ||
671 quirks[i].prodid == info->prodid)) {
672 info->quirk = &quirks[i];
673 break;
674 }
1da177e4
LT		 675
676 /* Another check for dual-serial cards: look for either serial or
677 multifunction cards that ask for appropriate IO port ranges */
1da177e4 678 if ((info->multi == 0) &&
efd50585
DB		 679 (link->has_func_id) &&
680 ((link->func_id == CISTPL_FUNCID_MULTI) ||
6ae3b84d
DB		 681 (link->func_id == CISTPL_FUNCID_SERIAL)))
682 pcmcia_loop_config(link, serial_check_for_multi, info);
1da177e4 683
1fbbac4b
RK		 684 /*
685 * Apply any multi-port quirk.
686 */
687 if (info->quirk && info->quirk->multi != -1)
688 info->multi = info->quirk->multi;
689
1da177e4 690 if (info->multi > 1)
a78621bb 691 i = multi_config(link);
1da177e4 692 else
a78621bb 693 i = simple_config(link);
1da177e4 694
a78621bb 695 if (i || info->ndev == 0)
1da177e4
LT		 696 goto failed;
697
eee3a883
RK		 698 /*
699 * Apply any post-init quirk. FIXME: This should really happen
700 * before we register the port, since it might already be in use.
701 */
702 if (info->quirk && info->quirk->post)
703 if (info->quirk->post(link))
704 goto failed;
1da177e4 705
15b99ac1 706 return 0;
1da177e4 707
f0a3a153 708failed:
a78621bb 709 dev_warn(&link->dev, "serial_cs: failed to initialize\n");
1da177e4 710 serial_remove(link);
15b99ac1 711 return -ENODEV;
1da177e4
LT		 712}
713
325aa29f
DB		 714static struct pcmcia_device_id serial_ids[] = {
715 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
716 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
717 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a),
718 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15),
719 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501),
720 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a),
721 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a),
722 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341),
723 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab),
724 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081),
725 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101),
726 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab),
f4d7510d
JK		 727 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
728 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
325aa29f
DB		 729 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
730 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
731 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
732 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
733 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
734 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
735 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
736 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
737 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
d277ad0e 738 PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
1546a713 739 PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e),
325aa29f
DB		 740 PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
741 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
742 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
743 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
744 PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
745 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
40738f3f
K		 746 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
747 PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
d277ad0e
K		 748 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
749 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
325aa29f
DB		 750 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
751 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
752 PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
d277ad0e 753 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
33d7959a 754 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
40738f3f
K		 755 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
756 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
325aa29f
DB		 757 PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
758 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
759 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
760 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020),
761 PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
762 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c),
763 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
764 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
765 PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77),
766 PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
767 PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301),
1de9cedf 768 PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276),
325aa29f
DB		 769 PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039),
770 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006),
771 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a),
772 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50),
773 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51),
774 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52),
775 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53),
776 PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180),
777 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e),
778 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b),
779 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
780 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
781 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
782 PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
783 PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef),
784 PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef),
785 PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef),
786 PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0),
1de9cedf 787 PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e),
325aa29f
DB		 788 PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a),
789 PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02),
790 PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa),
791 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76),
792 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95),
793 PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
794 PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
795 PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
d277ad0e 796 PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
325aa29f
DB		 797 PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
798 PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
799 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
800 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
801 PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a),
802 PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab),
803 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
bb289bc4 804 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),
531afd64
KK		 805 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"),
806 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"),
807 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
808 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
809 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
8b1d920f 810 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
bf6fda63
KK		 811 PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
812 PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
f0a3a153 813 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
bf6fda63 814 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"),
f0a3a153
KK		 815 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
816 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
63ca2d74 817 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
abe88069 818 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */
63ca2d74
KK		 819 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
820 PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
821 PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
531afd64 822 PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
bf6fda63
KK		 823 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"),
824 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),
825 PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
531afd64 826 PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
abe88069 827 PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"),
44e5e33e
TO		 828 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b),
829 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83),
830 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490),
831 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235),
832 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3),
833 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442),
834 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190),
835 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262),
836 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d),
837 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa),
838 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903),
839 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676),
840 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767),
841 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
842 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
843 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
844 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
845 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc),
846 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
847 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
848 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
849 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
850 PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
851 PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
9d9b7ad7 852 PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b),
325aa29f
DB		 853 /* too generic */
854 /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
855 /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */
856 PCMCIA_DEVICE_FUNC_ID(2),
857 PCMCIA_DEVICE_NULL,
858};
859MODULE_DEVICE_TABLE(pcmcia, serial_ids);
860
abe88069
KK		 861MODULE_FIRMWARE("cis/PCMLM28.cis");
862MODULE_FIRMWARE("cis/DP83903.cis");
863MODULE_FIRMWARE("cis/3CCFEM556.cis");
864MODULE_FIRMWARE("cis/3CXEM556.cis");
865MODULE_FIRMWARE("cis/SW_8xx_SER.cis");
866MODULE_FIRMWARE("cis/SW_7xx_SER.cis");
867MODULE_FIRMWARE("cis/SW_555_SER.cis");
868MODULE_FIRMWARE("cis/MT5634ZLX.cis");
869MODULE_FIRMWARE("cis/COMpad2.cis");
870MODULE_FIRMWARE("cis/COMpad4.cis");
871MODULE_FIRMWARE("cis/RS-COM-2P.cis");
872
1da177e4
LT		 873static struct pcmcia_driver serial_cs_driver = {
874 .owner = THIS_MODULE,
875 .drv = {
876 .name = "serial_cs",
877 },
f8cfa618 878 .probe = serial_probe,
cc3b4866 879 .remove = serial_detach,
325aa29f 880 .id_table = serial_ids,
98e4c28b
DB		 881 .suspend = serial_suspend,
882 .resume = serial_resume,
1da177e4
LT		 883};
884
885static int __init init_serial_cs(void)
886{
887 return pcmcia_register_driver(&serial_cs_driver);
888}
889
890static void __exit exit_serial_cs(void)
891{
892 pcmcia_unregister_driver(&serial_cs_driver);
1da177e4
LT		 893}
894
895module_init(init_serial_cs);
896module_exit(exit_serial_cs);
897
898MODULE_LICENSE("GPL");
Clone of davem's net-next-2.6 tree