]> bbs.cooldavid.org Git - net-next-2.6.git/blame - drivers/serial/serial_cs.c
git://bbs.cooldavid.org / net-next-2.6.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
[net-next-2.6.git] / drivers / serial / serial_cs.c
CommitLineData
1da177e4
LT		 1/*======================================================================
2
3 A driver for PCMCIA serial devices
4
5 serial_cs.c 1.134 2002/05/04 05:48:53
6
7 The contents of this file are subject to the Mozilla Public
8 License Version 1.1 (the "License"); you may not use this file
9 except in compliance with the License. You may obtain a copy of
10 the License at http://www.mozilla.org/MPL/
11
12 Software distributed under the License is distributed on an "AS
13 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
14 implied. See the License for the specific language governing
15 rights and limitations under the License.
16
17 The initial developer of the original code is David A. Hinds
18 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
19 are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
20
21 Alternatively, the contents of this file may be used under the
22 terms of the GNU General Public License version 2 (the "GPL"), in which
23 case the provisions of the GPL are applicable instead of the
24 above. If you wish to allow the use of your version of this file
25 only under the terms of the GPL and not to allow others to use
26 your version of this file under the MPL, indicate your decision
27 by deleting the provisions above and replace them with the notice
28 and other provisions required by the GPL. If you do not delete
29 the provisions above, a recipient may use your version of this
30 file under either the MPL or the GPL.
31
32======================================================================*/
33
34#include <linux/module.h>
35#include <linux/moduleparam.h>
36#include <linux/kernel.h>
37#include <linux/init.h>
1da177e4
LT		 38#include <linux/ptrace.h>
39#include <linux/slab.h>
40#include <linux/string.h>
41#include <linux/timer.h>
42#include <linux/serial_core.h>
30bac7aa 43#include <linux/delay.h>
1da177e4
LT		 44#include <linux/major.h>
45#include <asm/io.h>
46#include <asm/system.h>
47
1da177e4
LT		 48#include <pcmcia/cs.h>
49#include <pcmcia/cistpl.h>
50#include <pcmcia/ciscode.h>
51#include <pcmcia/ds.h>
52#include <pcmcia/cisreg.h>
53
54#include "8250.h"
55
1da177e4
LT		 56
57/*====================================================================*/
58
59/* Parameters that can be set with 'insmod' */
60
61/* Enable the speaker? */
62static int do_sound = 1;
63/* Skip strict UART tests? */
64static int buggy_uart;
65
66module_param(do_sound, int, 0444);
67module_param(buggy_uart, int, 0444);
68
69/*====================================================================*/
70
71/* Table of multi-port card ID's */
72
1fbbac4b 73struct serial_quirk {
a8244b56
RK		 74 unsigned int manfid;
75 unsigned int prodid;
1da177e4 76 int multi; /* 1 = multifunction, > 1 = # ports */
efd92dfa 77 void (*config)(struct pcmcia_device *);
f3d10688 78 void (*setup)(struct pcmcia_device *, struct uart_port *);
7ef057fa 79 void (*wakeup)(struct pcmcia_device *);
eee3a883 80 int (*post)(struct pcmcia_device *);
1da177e4
LT		 81};
82
eee3a883
RK		 83struct serial_info {
84 struct pcmcia_device *p_dev;
85 int ndev;
86 int multi;
87 int slave;
88 int manfid;
89 int prodid;
90 int c950ctrl;
eee3a883
RK		 91 int line[4];
92 const struct serial_quirk *quirk;
93};
94
95struct serial_cfg_mem {
96 tuple_t tuple;
97 cisparse_t parse;
98 u_char buf[256];
99};
100
f3d10688
RK		 101/*
102 * vers_1 5.0, "Brain Boxes", "2-Port RS232 card", "r6"
103 * manfid 0x0160, 0x0104
104 * This card appears to have a 14.7456MHz clock.
105 */
6f4567c8
TM		 106/* Generic Modem: MD55x (GPRS/EDGE) have
107 * Elan VPU16551 UART with 14.7456MHz oscillator
108 * manfid 0x015D, 0x4C45
109 */
f3d10688
RK		 110static void quirk_setup_brainboxes_0104(struct pcmcia_device *link, struct uart_port *port)
111{
112 port->uartclk = 14745600;
113}
114
eee3a883
RK		 115static int quirk_post_ibm(struct pcmcia_device *link)
116{
1d5cc192 117 u8 val;
9ec0bf41
DB		 118 int ret;
119
1d5cc192 120 ret = pcmcia_read_config_byte(link, 0x800, &val);
9ec0bf41
DB		 121 if (ret)
122 goto failed;
eee3a883 123
1d5cc192 124 ret = pcmcia_write_config_byte(link, 0x800, val | 1);
9ec0bf41
DB		 125 if (ret)
126 goto failed;
eee3a883
RK		 127 return 0;
128
9ec0bf41 129 failed:
eee3a883
RK		 130 return -ENODEV;
131}
132
20f13049
RK		 133/*
134 * Nokia cards are not really multiport cards. Shouldn't this
135 * be handled by setting the quirk entry .multi = 0 | 1 ?
136 */
137static void quirk_config_nokia(struct pcmcia_device *link)
138{
139 struct serial_info *info = link->priv;
140
141 if (info->multi > 1)
142 info->multi = 1;
143}
144
7ef057fa
RK		 145static void quirk_wakeup_oxsemi(struct pcmcia_device *link)
146{
147 struct serial_info *info = link->priv;
148
18c576f9
PM		 149 if (info->c950ctrl)
150 outb(12, info->c950ctrl + 1);
7ef057fa
RK		 151}
152
153/* request_region? oxsemi branch does no request_region too... */
154/*
155 * This sequence is needed to properly initialize MC45 attached to OXCF950.
156 * I tried decreasing these msleep()s, but it worked properly (survived
157 * 1000 stop/start operations) with these timeouts (or bigger).
158 */
159static void quirk_wakeup_possio_gcc(struct pcmcia_device *link)
160{
161 struct serial_info *info = link->priv;
162 unsigned int ctrl = info->c950ctrl;
163
164 outb(0xA, ctrl + 1);
165 msleep(100);
166 outb(0xE, ctrl + 1);
167 msleep(300);
168 outb(0xC, ctrl + 1);
169 msleep(100);
170 outb(0xE, ctrl + 1);
171 msleep(200);
172 outb(0xF, ctrl + 1);
173 msleep(100);
174 outb(0xE, ctrl + 1);
175 msleep(100);
176 outb(0xC, ctrl + 1);
177}
178
efd92dfa
RK		 179/*
180 * Socket Dual IO: this enables irq's for second port
181 */
182static void quirk_config_socket(struct pcmcia_device *link)
183{
184 struct serial_info *info = link->priv;
185
186 if (info->multi) {
187 link->conf.Present |= PRESENT_EXT_STATUS;
188 link->conf.ExtStatus = ESR_REQ_ATTN_ENA;
189 }
190}
191
1fbbac4b
RK		 192static const struct serial_quirk quirks[] = {
193 {
f3d10688
RK		 194 .manfid = 0x0160,
195 .prodid = 0x0104,
196 .multi = -1,
197 .setup = quirk_setup_brainboxes_0104,
6f4567c8
TM		 198 }, {
199 .manfid = 0x015D,
200 .prodid = 0x4C45,
201 .multi = -1,
202 .setup = quirk_setup_brainboxes_0104,
f3d10688 203 }, {
eee3a883
RK		 204 .manfid = MANFID_IBM,
205 .prodid = ~0,
206 .multi = -1,
207 .post = quirk_post_ibm,
7ef057fa
RK		 208 }, {
209 .manfid = MANFID_INTEL,
210 .prodid = PRODID_INTEL_DUAL_RS232,
211 .multi = 2,
212 }, {
213 .manfid = MANFID_NATINST,
214 .prodid = PRODID_NATINST_QUAD_RS232,
215 .multi = 4,
20f13049
RK		 216 }, {
217 .manfid = MANFID_NOKIA,
218 .prodid = ~0,
219 .multi = -1,
220 .config = quirk_config_nokia,
eee3a883 221 }, {
1fbbac4b
RK		 222 .manfid = MANFID_OMEGA,
223 .prodid = PRODID_OMEGA_QSP_100,
224 .multi = 4,
7ef057fa
RK		 225 }, {
226 .manfid = MANFID_OXSEMI,
227 .prodid = ~0,
228 .multi = -1,
229 .wakeup = quirk_wakeup_oxsemi,
230 }, {
231 .manfid = MANFID_POSSIO,
232 .prodid = PRODID_POSSIO_GCC,
233 .multi = -1,
234 .wakeup = quirk_wakeup_possio_gcc,
1fbbac4b
RK		 235 }, {
236 .manfid = MANFID_QUATECH,
237 .prodid = PRODID_QUATECH_DUAL_RS232,
238 .multi = 2,
239 }, {
240 .manfid = MANFID_QUATECH,
241 .prodid = PRODID_QUATECH_DUAL_RS232_D1,
242 .multi = 2,
bb289bc4
SO		 243 }, {
244 .manfid = MANFID_QUATECH,
245 .prodid = PRODID_QUATECH_DUAL_RS232_G,
246 .multi = 2,
1fbbac4b
RK		 247 }, {
248 .manfid = MANFID_QUATECH,
249 .prodid = PRODID_QUATECH_QUAD_RS232,
250 .multi = 4,
251 }, {
252 .manfid = MANFID_SOCKET,
253 .prodid = PRODID_SOCKET_DUAL_RS232,
254 .multi = 2,
efd92dfa
RK		 255 .config = quirk_config_socket,
256 }, {
257 .manfid = MANFID_SOCKET,
258 .prodid = ~0,
259 .multi = -1,
260 .config = quirk_config_socket,
1fbbac4b 261 }
1da177e4 262};
1da177e4 263
16f31113 264
15b99ac1 265static int serial_config(struct pcmcia_device * link);
1da177e4 266
1da177e4 267
1da177e4
LT		 268/*======================================================================
269
270 After a card is removed, serial_remove() will unregister
271 the serial device(s), and release the PCMCIA configuration.
272
273======================================================================*/
274
fba395ee 275static void serial_remove(struct pcmcia_device *link)
1da177e4
LT		 276{
277 struct serial_info *info = link->priv;
278 int i;
279
9ec0bf41 280 dev_dbg(&link->dev, "serial_release\n");
1da177e4
LT		 281
282 /*
283 * Recheck to see if the device is still configured.
284 */
e2d40963
DB		 285 for (i = 0; i < info->ndev; i++)
286 serial8250_unregister_port(info->line[i]);
1da177e4 287
e2d40963
DB		 288 if (!info->slave)
289 pcmcia_disable_device(link);
1da177e4
LT		 290}
291
fba395ee 292static int serial_suspend(struct pcmcia_device *link)
1da177e4 293{
e2d40963
DB		 294 struct serial_info *info = link->priv;
295 int i;
1da177e4 296
e2d40963
DB		 297 for (i = 0; i < info->ndev; i++)
298 serial8250_suspend_port(info->line[i]);
98e4c28b
DB		 299
300 return 0;
1da177e4
LT		 301}
302
fba395ee 303static int serial_resume(struct pcmcia_device *link)
1da177e4 304{
fe59d537
RK		 305 struct serial_info *info = link->priv;
306 int i;
1da177e4 307
fe59d537
RK		 308 for (i = 0; i < info->ndev; i++)
309 serial8250_resume_port(info->line[i]);
7ef057fa 310
fe59d537
RK		 311 if (info->quirk && info->quirk->wakeup)
312 info->quirk->wakeup(link);
98e4c28b
DB		 313
314 return 0;
1da177e4
LT		 315}
316
317/*======================================================================
318
319 serial_attach() creates an "instance" of the driver, allocating
320 local data structures for one device. The device is registered
321 with Card Services.
322
323======================================================================*/
324
fba395ee 325static int serial_probe(struct pcmcia_device *link)
1da177e4
LT		 326{
327 struct serial_info *info;
1da177e4 328
9ec0bf41 329 dev_dbg(&link->dev, "serial_attach()\n");
1da177e4
LT		 330
331 /* Create new serial device */
8f31bb39 332 info = kzalloc(sizeof (*info), GFP_KERNEL);
1da177e4 333 if (!info)
f8cfa618 334 return -ENOMEM;
fba395ee 335 info->p_dev = link;
1da177e4
LT		 336 link->priv = info;
337
1da177e4
LT		 338 link->conf.Attributes = CONF_ENABLE_IRQ;
339 if (do_sound) {
340 link->conf.Attributes |= CONF_ENABLE_SPKR;
341 link->conf.Status = CCSR_AUDIO_ENA;
342 }
343 link->conf.IntType = INT_MEMORY_AND_IO;
344
15b99ac1 345 return serial_config(link);
1da177e4
LT		 346}
347
348/*======================================================================
349
350 This deletes a driver "instance". The device is de-registered
351 with Card Services. If it has been released, all local data
352 structures are freed. Otherwise, the structures will be freed
353 when the device is released.
354
355======================================================================*/
356
fba395ee 357static void serial_detach(struct pcmcia_device *link)
1da177e4
LT		 358{
359 struct serial_info *info = link->priv;
1da177e4 360
9ec0bf41 361 dev_dbg(&link->dev, "serial_detach\n");
1da177e4 362
1da177e4
LT		 363 /*
364 * Ensure any outstanding scheduled tasks are completed.
365 */
366 flush_scheduled_work();
367
368 /*
369 * Ensure that the ports have been released.
370 */
371 serial_remove(link);
372
b4635811 373 /* free bits */
1da177e4
LT		 374 kfree(info);
375}
376
377/*====================================================================*/
378
fba395ee 379static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
906da809 380 unsigned int iobase, int irq)
1da177e4
LT		 381{
382 struct uart_port port;
383 int line;
384
385 memset(&port, 0, sizeof (struct uart_port));
386 port.iobase = iobase;
387 port.irq = irq;
388 port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
389 port.uartclk = 1843200;
dd2e5a15 390 port.dev = &handle->dev;
1da177e4
LT		 391 if (buggy_uart)
392 port.flags |= UPF_BUGGY_UART;
f3d10688
RK		 393
394 if (info->quirk && info->quirk->setup)
395 info->quirk->setup(handle, &port);
396
1da177e4
LT		 397 line = serial8250_register_port(&port);
398 if (line < 0) {
399 printk(KERN_NOTICE "serial_cs: serial8250_register_port() at "
400 "0x%04lx, irq %d failed\n", (u_long)iobase, irq);
401 return -EINVAL;
402 }
403
404 info->line[info->ndev] = line;
1da177e4
LT		 405 info->ndev++;
406
407 return 0;
408}
409
410/*====================================================================*/
411
c494bc6c
DB		 412static int pfc_config(struct pcmcia_device *p_dev)
413{
414 unsigned int port = 0;
415 struct serial_info *info = p_dev->priv;
416
417 if ((p_dev->resource[1]->end != 0) &&
418 (resource_size(p_dev->resource[1]) == 8)) {
419 port = p_dev->resource[1]->start;
420 info->slave = 1;
421 } else if ((info->manfid == MANFID_OSITECH) &&
422 (resource_size(p_dev->resource[0]) == 0x40)) {
423 port = p_dev->resource[0]->start + 0x28;
424 info->slave = 1;
425 }
426 if (info->slave)
427 return setup_serial(p_dev, info, port, p_dev->irq);
428
429 dev_warn(&p_dev->dev, "no usable port range found, giving up\n");
430 return -ENODEV;
431}
432
84e2d340
DB		 433static int simple_config_check(struct pcmcia_device *p_dev,
434 cistpl_cftable_entry_t *cf,
8e2fc39d 435 cistpl_cftable_entry_t *dflt,
ad913c11 436 unsigned int vcc,
84e2d340 437 void *priv_data)
1da177e4 438{
84e2d340
DB		 439 static const int size_table[2] = { 8, 16 };
440 int *try = priv_data;
441
442 if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
443 p_dev->conf.Vpp =
444 cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
445
90abdc3b
DB		 446 p_dev->io_lines = ((*try & 0x1) == 0) ?
447 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
448
84e2d340
DB		 449 if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)])
450 && (cf->io.win[0].base != 0)) {
90abdc3b
DB		 451 p_dev->resource[0]->start = cf->io.win[0].base;
452 if (!pcmcia_request_io(p_dev))
84e2d340
DB		 453 return 0;
454 }
455 return -EINVAL;
1da177e4
LT		 456}
457
84e2d340
DB		 458static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
459 cistpl_cftable_entry_t *cf,
8e2fc39d 460 cistpl_cftable_entry_t *dflt,
ad913c11 461 unsigned int vcc,
84e2d340
DB		 462 void *priv_data)
463{
464 static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
465 int j;
466
467 if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
84e2d340 468 for (j = 0; j < 5; j++) {
90abdc3b
DB		 469 p_dev->resource[0]->start = base[j];
470 p_dev->io_lines = base[j] ? 16 : 3;
471 if (!pcmcia_request_io(p_dev))
84e2d340
DB		 472 return 0;
473 }
474 }
475 return -ENODEV;
476}
1da177e4 477
fba395ee 478static int simple_config(struct pcmcia_device *link)
1da177e4 479{
1da177e4 480 struct serial_info *info = link->priv;
ef313e36 481 int i = -ENODEV, try;
16f31113 482
c494bc6c
DB		 483 link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
484 link->resource[0]->end = 8;
1da177e4 485
84e2d340
DB		 486 /* First pass: look for a config entry that looks normal.
487 * Two tries: without IO aliases, then with aliases */
488 for (try = 0; try < 4; try++)
489 if (!pcmcia_loop_config(link, simple_config_check, &try))
490 goto found_port;
491
1da177e4
LT		 492 /* Second pass: try to find an entry that isn't picky about
493 its base address, then try to grab any standard serial port
494 address, and finally try to get any free port. */
84e2d340
DB		 495 if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
496 goto found_port;
1da177e4 497
c494bc6c 498 dev_warn(&link->dev, "no usable port range found, giving up\n");
84e2d340 499 return -1;
1da177e4 500
84e2d340 501found_port:
1da177e4
LT		 502 if (info->multi && (info->manfid == MANFID_3COM))
503 link->conf.ConfigIndex &= ~(0x08);
efd92dfa
RK		 504
505 /*
506 * Apply any configuration quirks.
507 */
508 if (info->quirk && info->quirk->config)
509 info->quirk->config(link);
510
fba395ee 511 i = pcmcia_request_configuration(link, &link->conf);
9ec0bf41 512 if (i != 0)
1da177e4 513 return -1;
9a017a91 514 return setup_serial(link, info, link->resource[0]->start, link->irq);
1da177e4
LT		 515}
516
84e2d340
DB		 517static int multi_config_check(struct pcmcia_device *p_dev,
518 cistpl_cftable_entry_t *cf,
8e2fc39d 519 cistpl_cftable_entry_t *dflt,
ad913c11 520 unsigned int vcc,
84e2d340 521 void *priv_data)
1da177e4 522{
84e2d340
DB		 523 int *base2 = priv_data;
524
525 /* The quad port cards have bad CIS's, so just look for a
526 window larger than 8 ports and assume it will be right */
527 if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
90abdc3b
DB		 528 p_dev->resource[0]->start = cf->io.win[0].base;
529 p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
530 if (!pcmcia_request_io(p_dev)) {
9a017a91 531 *base2 = p_dev->resource[0]->start + 8;
84e2d340
DB		 532 return 0;
533 }
534 }
535 return -ENODEV;
536}
16f31113 537
84e2d340
DB		 538static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
539 cistpl_cftable_entry_t *cf,
8e2fc39d 540 cistpl_cftable_entry_t *dflt,
ad913c11 541 unsigned int vcc,
84e2d340
DB		 542 void *priv_data)
543{
544 int *base2 = priv_data;
545
546 if (cf->io.nwin == 2) {
90abdc3b
DB		 547 p_dev->resource[0]->start = cf->io.win[0].base;
548 p_dev->resource[1]->start = cf->io.win[1].base;
549 p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK;
550 if (!pcmcia_request_io(p_dev)) {
9a017a91 551 *base2 = p_dev->resource[1]->start;
84e2d340
DB		 552 return 0;
553 }
554 }
555 return -ENODEV;
556}
1da177e4 557
84e2d340
DB		 558static int multi_config(struct pcmcia_device *link)
559{
560 struct serial_info *info = link->priv;
561 int i, base2 = 0;
1da177e4
LT		 562
563 /* First, look for a generic full-sized window */
c494bc6c 564 link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
90abdc3b 565 link->resource[0]->end = info->multi * 8;
84e2d340
DB		 566 if (pcmcia_loop_config(link, multi_config_check, &base2)) {
567 /* If that didn't work, look for two windows */
90abdc3b 568 link->resource[0]->end = link->resource[1]->end = 8;
1da177e4 569 info->multi = 2;
84e2d340
DB		 570 if (pcmcia_loop_config(link, multi_config_check_notpicky,
571 &base2)) {
c494bc6c 572 dev_warn(&link->dev, "no usable port range "
84e2d340
DB		 573 "found, giving up\n");
574 return -ENODEV;
1da177e4
LT		 575 }
576 }
577
eb14120f 578 if (!link->irq)
c494bc6c 579 dev_warn(&link->dev, "no usable IRQ found, continuing...\n");
efd92dfa
RK		 580
581 /*
582 * Apply any configuration quirks.
583 */
584 if (info->quirk && info->quirk->config)
585 info->quirk->config(link);
586
fba395ee 587 i = pcmcia_request_configuration(link, &link->conf);
9ec0bf41 588 if (i != 0)
84e2d340 589 return -ENODEV;
1da177e4
LT		 590
591 /* The Oxford Semiconductor OXCF950 cards are in fact single-port:
30bac7aa
PV		 592 * 8 registers are for the UART, the others are extra registers.
593 * Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too.
594 */
595 if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO &&
596 info->prodid == PRODID_POSSIO_GCC)) {
597 int err;
598
84e2d340
DB		 599 if (link->conf.ConfigIndex == 1 ||
600 link->conf.ConfigIndex == 3) {
30bac7aa 601 err = setup_serial(link, info, base2,
eb14120f 602 link->irq);
9a017a91 603 base2 = link->resource[0]->start;;
1da177e4 604 } else {
9a017a91 605 err = setup_serial(link, info, link->resource[0]->start,
eb14120f 606 link->irq);
1da177e4 607 }
30bac7aa 608 info->c950ctrl = base2;
7ef057fa
RK		 609
610 /*
611 * FIXME: We really should wake up the port prior to
612 * handing it over to the serial layer.
613 */
614 if (info->quirk && info->quirk->wakeup)
615 info->quirk->wakeup(link);
616
84e2d340 617 return 0;
1da177e4
LT		 618 }
619
9a017a91 620 setup_serial(link, info, link->resource[0]->start, link->irq);
1da177e4 621 for (i = 0; i < info->multi - 1; i++)
fba395ee 622 setup_serial(link, info, base2 + (8 * i),
eb14120f 623 link->irq);
84e2d340 624 return 0;
1da177e4
LT		 625}
626
6ae3b84d
DB		 627static int serial_check_for_multi(struct pcmcia_device *p_dev,
628 cistpl_cftable_entry_t *cf,
629 cistpl_cftable_entry_t *dflt,
630 unsigned int vcc,
631 void *priv_data)
632{
633 struct serial_info *info = p_dev->priv;
634
635 if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
636 info->multi = cf->io.win[0].len >> 3;
637
638 if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
639 (cf->io.win[1].len == 8))
640 info->multi = 2;
641
642 return 0; /* break */
643}
644
645
1da177e4
LT		 646/*======================================================================
647
648 serial_config() is scheduled to run after a CARD_INSERTION event
649 is received, to configure the PCMCIA socket, and to make the
650 serial device available to the system.
651
652======================================================================*/
653
15b99ac1 654static int serial_config(struct pcmcia_device * link)
1da177e4 655{
1da177e4 656 struct serial_info *info = link->priv;
6ae3b84d 657 int i;
16f31113 658
9ec0bf41 659 dev_dbg(&link->dev, "serial_config\n");
f0a3a153 660
1da177e4 661 /* Is this a compliant multifunction card? */
6ae3b84d 662 info->multi = (link->socket->functions > 1);
1da177e4
LT		 663
664 /* Is this a multiport card? */
efd50585
DB		 665 info->manfid = link->manf_id;
666 info->prodid = link->card_id;
667
668 for (i = 0; i < ARRAY_SIZE(quirks); i++)
669 if ((quirks[i].manfid == ~0 ||
670 quirks[i].manfid == info->manfid) &&
671 (quirks[i].prodid == ~0 ||
672 quirks[i].prodid == info->prodid)) {
673 info->quirk = &quirks[i];
674 break;
675 }
1da177e4
LT		 676
677 /* Another check for dual-serial cards: look for either serial or
678 multifunction cards that ask for appropriate IO port ranges */
1da177e4 679 if ((info->multi == 0) &&
efd50585 680 (link->has_func_id) &&
c494bc6c 681 (link->socket->pcmcia_pfc == 0) &&
efd50585 682 ((link->func_id == CISTPL_FUNCID_MULTI) ||
6ae3b84d
DB		 683 (link->func_id == CISTPL_FUNCID_SERIAL)))
684 pcmcia_loop_config(link, serial_check_for_multi, info);
1da177e4 685
1fbbac4b
RK		 686 /*
687 * Apply any multi-port quirk.
688 */
689 if (info->quirk && info->quirk->multi != -1)
690 info->multi = info->quirk->multi;
691
c494bc6c
DB		 692 dev_info(&link->dev,
693 "trying to set up [0x%04x:0x%04x] (pfc: %d, multi: %d, quirk: %p)\n",
694 link->manf_id, link->card_id,
695 link->socket->pcmcia_pfc, info->multi, info->quirk);
696 if (link->socket->pcmcia_pfc)
697 i = pfc_config(link);
698 else if (info->multi > 1)
a78621bb 699 i = multi_config(link);
1da177e4 700 else
a78621bb 701 i = simple_config(link);
1da177e4 702
a78621bb 703 if (i || info->ndev == 0)
1da177e4
LT		 704 goto failed;
705
eee3a883
RK		 706 /*
707 * Apply any post-init quirk. FIXME: This should really happen
708 * before we register the port, since it might already be in use.
709 */
710 if (info->quirk && info->quirk->post)
711 if (info->quirk->post(link))
712 goto failed;
1da177e4 713
15b99ac1 714 return 0;
1da177e4 715
f0a3a153 716failed:
c494bc6c 717 dev_warn(&link->dev, "failed to initialize\n");
1da177e4 718 serial_remove(link);
15b99ac1 719 return -ENODEV;
1da177e4
LT		 720}
721
325aa29f
DB		 722static struct pcmcia_device_id serial_ids[] = {
723 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
724 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
725 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a),
99ec88f3
AK		 726 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
727 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
325aa29f
DB		 728 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15),
729 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501),
730 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a),
731 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a),
732 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341),
733 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab),
734 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081),
735 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101),
736 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab),
737 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
738 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
739 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
740 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
741 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
742 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
743 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
744 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
745 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
d277ad0e 746 PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
1546a713 747 PCMCIA_PFC_DEVICE_PROD_ID12(1, "ATKK", "LM33-PCM-T", 0xba9eb7e2, 0x077c174e),
325aa29f
DB		 748 PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
749 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
750 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
751 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
752 PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
753 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
40738f3f
K		 754 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MICRO RESEARCH", "COMBO-L/M-336", 0xb2ced065, 0x3ced0555),
755 PCMCIA_PFC_DEVICE_PROD_ID12(1, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
d277ad0e
K		 756 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
757 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
325aa29f
DB		 758 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
759 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
760 PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
d277ad0e 761 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
33d7959a 762 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0e01),
40738f3f
K		 763 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x0a05),
764 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0032, 0x1101),
325aa29f
DB		 765 PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
766 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
767 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
768 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020),
769 PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
770 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c),
771 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
772 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
773 PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77),
774 PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
775 PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301),
1de9cedf 776 PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276),
325aa29f
DB		 777 PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039),
778 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006),
99ec88f3
AK		 779 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x0101), /* TDK DF2814 */
780 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x100a), /* Xircom CM-56G */
781 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x3e0a), /* TDK DF5660 */
325aa29f 782 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a),
99ec88f3 783 PCMCIA_DEVICE_MANF_CARD(0x0107, 0x0002), /* USRobotics 14,400 */
325aa29f
DB		 784 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50),
785 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51),
786 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52),
787 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53),
788 PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180),
99ec88f3
AK		 789 PCMCIA_DEVICE_MANF_CARD(0x0115, 0x3330), /* USRobotics/SUN 14,400 */
790 PCMCIA_DEVICE_MANF_CARD(0x0124, 0x0100), /* Nokia DTP-2 ver II */
791 PCMCIA_DEVICE_MANF_CARD(0x0134, 0x5600), /* LASAT COMMUNICATIONS A/S */
325aa29f
DB		 792 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e),
793 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b),
794 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
795 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
796 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
99ec88f3
AK		 797 PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0006), /* Psion 56K+Fax */
798 PCMCIA_DEVICE_MANF_CARD(0x0200, 0x0001), /* MultiMobile */
325aa29f
DB		 799 PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
800 PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef),
801 PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef),
802 PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef),
803 PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0),
1de9cedf 804 PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e),
325aa29f
DB		 805 PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a),
806 PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02),
807 PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa),
808 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76),
809 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95),
810 PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
811 PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
99ec88f3 812 PCMCIA_DEVICE_PROD_ID12("IBM", "ISDN/56K/GSM", 0xb569a6e5, 0xfee5297b),
325aa29f 813 PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
d277ad0e 814 PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
99ec88f3 815 PCMCIA_DEVICE_PROD_ID12("Intertex", "IX34-PCMCIA", 0xf8a097e3, 0x97880447),
325aa29f
DB		 816 PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
817 PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
818 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
819 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
820 PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a),
99ec88f3 821 PCMCIA_DEVICE_PROD_ID12("Option International", "V34bis GSM/PSTN Data/Fax Modem", 0x9d7cd6f5, 0x5cb8bf41),
325aa29f
DB		 822 PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab),
823 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
bb289bc4 824 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "Dual RS-232 Serial Port PC Card", 0xc4420b35, 0x031a380d),
99ec88f3
AK		 825 PCMCIA_DEVICE_PROD_ID12("Telia", "SurfinBird 560P/A+", 0xe2cdd5e, 0xc9314b38),
826 PCMCIA_DEVICE_PROD_ID1("Smart Serial Port", 0x2d8ce292),
531afd64
KK		 827 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "cis/PCMLM28.cis"),
828 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "cis/PCMLM28.cis"),
829 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
830 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
831 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
8b1d920f 832 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
bf6fda63
KK		 833 PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
834 PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
f0a3a153 835 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
bf6fda63 836 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "cis/DP83903.cis"),
f0a3a153
KK		 837 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "cis/3CXEM556.cis"),
838 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "cis/3CXEM556.cis"),
63ca2d74 839 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC850", 0xd85f6206, 0x42a2c018, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC850 3G Network Adapter R1 */
abe88069 840 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC860", 0xd85f6206, 0x698f93db, "cis/SW_8xx_SER.cis"), /* Sierra Wireless AC860 3G Network Adapter R1 */
63ca2d74
KK		 841 PCMCIA_DEVICE_CIS_PROD_ID12("Sierra Wireless", "AC710/AC750", 0xd85f6206, 0x761b11e0, "cis/SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
842 PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
843 PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "cis/SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
531afd64 844 PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "cis/MT5634ZLX.cis"),
bf6fda63
KK		 845 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-2", 0x96913a85, 0x27ab5437, "cis/COMpad2.cis"),
846 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "cis/COMpad4.cis"),
847 PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "cis/COMpad2.cis"),
531afd64 848 PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "cis/RS-COM-2P.cis"),
abe88069 849 PCMCIA_DEVICE_CIS_MANF_CARD(0x0013, 0x0000, "cis/GLOBETROTTER.cis"),
44e5e33e
TO		 850 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100 1.00.",0x19ca78af,0xf964f42b),
851 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL100",0x19ca78af,0x71d98e83),
852 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232 1.00.",0x19ca78af,0x69fb7490),
853 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c1997.","SERIAL CARD: SL232",0x19ca78af,0xb6bc0235),
854 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232",0x63f2e0bd,0xb9e175d3),
855 PCMCIA_DEVICE_PROD_ID12("ELAN DIGITAL SYSTEMS LTD, c2000.","SERIAL CARD: CF232-5",0x63f2e0bd,0xfce33442),
856 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232",0x3beb8cf2,0x171e7190),
857 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF232-5",0x3beb8cf2,0x20da4262),
858 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF428",0x3beb8cf2,0xea5dd57d),
859 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: CF500",0x3beb8cf2,0xd77255fa),
860 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: IC232",0x3beb8cf2,0x6a709903),
861 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: SL232",0x3beb8cf2,0x18430676),
862 PCMCIA_DEVICE_PROD_ID12("Elan","Serial Port: XL232",0x3beb8cf2,0x6f933767),
863 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
864 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
865 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
866 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
867 PCMCIA_MFC_DEVICE_PROD_ID12(0,"Elan","Serial+Parallel Port: SP230",0x3beb8cf2,0xdb9e58bc),
868 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: CF332",0x3beb8cf2,0x16dc1ba7),
869 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL332",0x3beb8cf2,0x19816c41),
870 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL385",0x3beb8cf2,0x64112029),
871 PCMCIA_MFC_DEVICE_PROD_ID12(1,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
872 PCMCIA_MFC_DEVICE_PROD_ID12(2,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
873 PCMCIA_MFC_DEVICE_PROD_ID12(3,"Elan","Serial Port: SL432",0x3beb8cf2,0x1cce7ac4),
9d9b7ad7 874 PCMCIA_DEVICE_MANF_CARD(0x0279, 0x950b),
325aa29f
DB		 875 /* too generic */
876 /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
877 /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */
878 PCMCIA_DEVICE_FUNC_ID(2),
879 PCMCIA_DEVICE_NULL,
880};
881MODULE_DEVICE_TABLE(pcmcia, serial_ids);
882
abe88069
KK		 883MODULE_FIRMWARE("cis/PCMLM28.cis");
884MODULE_FIRMWARE("cis/DP83903.cis");
885MODULE_FIRMWARE("cis/3CCFEM556.cis");
886MODULE_FIRMWARE("cis/3CXEM556.cis");
887MODULE_FIRMWARE("cis/SW_8xx_SER.cis");
888MODULE_FIRMWARE("cis/SW_7xx_SER.cis");
889MODULE_FIRMWARE("cis/SW_555_SER.cis");
890MODULE_FIRMWARE("cis/MT5634ZLX.cis");
891MODULE_FIRMWARE("cis/COMpad2.cis");
892MODULE_FIRMWARE("cis/COMpad4.cis");
893MODULE_FIRMWARE("cis/RS-COM-2P.cis");
894
1da177e4
LT		 895static struct pcmcia_driver serial_cs_driver = {
896 .owner = THIS_MODULE,
897 .drv = {
898 .name = "serial_cs",
899 },
f8cfa618 900 .probe = serial_probe,
cc3b4866 901 .remove = serial_detach,
325aa29f 902 .id_table = serial_ids,
98e4c28b
DB		 903 .suspend = serial_suspend,
904 .resume = serial_resume,
1da177e4
LT		 905};
906
907static int __init init_serial_cs(void)
908{
909 return pcmcia_register_driver(&serial_cs_driver);
910}
911
912static void __exit exit_serial_cs(void)
913{
914 pcmcia_unregister_driver(&serial_cs_driver);
1da177e4
LT		 915}
916
917module_init(init_serial_cs);
918module_exit(exit_serial_cs);
919
920MODULE_LICENSE("GPL");
Clone of davem's net-next-2.6 tree