]> bbs.cooldavid.org Git - net-next-2.6.git/blame - drivers/net/wan/wanxl.c
git://bbs.cooldavid.org / net-next-2.6.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
[PATCH] irq-flags: drivers/net: Use the new IRQF_ constants
[net-next-2.6.git] / drivers / net / wan / wanxl.c
CommitLineData
1da177e4
LT		 1/*
2 * wanXL serial card driver for Linux
3 * host part
4 *
5 * Copyright (C) 2003 Krzysztof Halasa <khc@pm.waw.pl>
6 *
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of version 2 of the GNU General Public License
9 * as published by the Free Software Foundation.
10 *
11 * Status:
12 * - Only DTE (external clock) support with NRZ and NRZI encodings
13 * - wanXL100 will require minor driver modifications, no access to hw
14 */
15
16#include <linux/module.h>
17#include <linux/kernel.h>
18#include <linux/slab.h>
19#include <linux/sched.h>
20#include <linux/types.h>
21#include <linux/fcntl.h>
22#include <linux/string.h>
23#include <linux/errno.h>
24#include <linux/init.h>
25#include <linux/ioport.h>
26#include <linux/netdevice.h>
27#include <linux/hdlc.h>
28#include <linux/pci.h>
1e7f0bd8 29#include <linux/dma-mapping.h>
164006da 30#include <linux/delay.h>
1da177e4 31#include <asm/io.h>
1da177e4
LT		 32
33#include "wanxl.h"
34
35static const char* version = "wanXL serial card driver version: 0.48";
36
37#define PLX_CTL_RESET 0x40000000 /* adapter reset */
38
39#undef DEBUG_PKT
40#undef DEBUG_PCI
41
42/* MAILBOX #1 - PUTS COMMANDS */
43#define MBX1_CMD_ABORTJ 0x85000000 /* Abort and Jump */
44#ifdef __LITTLE_ENDIAN
45#define MBX1_CMD_BSWAP 0x8C000001 /* little-endian Byte Swap Mode */
46#else
47#define MBX1_CMD_BSWAP 0x8C000000 /* big-endian Byte Swap Mode */
48#endif
49
50/* MAILBOX #2 - DRAM SIZE */
51#define MBX2_MEMSZ_MASK 0xFFFF0000 /* PUTS Memory Size Register mask */
52
53
54typedef struct {
55 struct net_device *dev;
56 struct card_t *card;
57 spinlock_t lock; /* for wanxl_xmit */
58 int node; /* physical port #0 - 3 */
59 unsigned int clock_type;
60 int tx_in, tx_out;
61 struct sk_buff *tx_skbs[TX_BUFFERS];
62}port_t;
63
64
65typedef struct {
66 desc_t rx_descs[RX_QUEUE_LENGTH];
67 port_status_t port_status[4];
68}card_status_t;
69
70
71typedef struct card_t {
72 int n_ports; /* 1, 2 or 4 ports */
73 u8 irq;
74
75 u8 __iomem *plx; /* PLX PCI9060 virtual base address */
76 struct pci_dev *pdev; /* for pci_name(pdev) */
77 int rx_in;
78 struct sk_buff *rx_skbs[RX_QUEUE_LENGTH];
79 card_status_t *status; /* shared between host and card */
80 dma_addr_t status_address;
81 port_t ports[0]; /* 1 - 4 port_t structures follow */
82}card_t;
83
84
85
86static inline port_t* dev_to_port(struct net_device *dev)
87{
88 return (port_t *)dev_to_hdlc(dev)->priv;
89}
90
91
92static inline port_status_t* get_status(port_t *port)
93{
94 return &port->card->status->port_status[port->node];
95}
96
97
98#ifdef DEBUG_PCI
99static inline dma_addr_t pci_map_single_debug(struct pci_dev *pdev, void *ptr,
100 size_t size, int direction)
101{
102 dma_addr_t addr = pci_map_single(pdev, ptr, size, direction);
103 if (addr + size > 0x100000000LL)
104 printk(KERN_CRIT "wanXL %s: pci_map_single() returned memory"
105 " at 0x%LX!\n", pci_name(pdev),
106 (unsigned long long)addr);
107 return addr;
108}
109
110#undef pci_map_single
111#define pci_map_single pci_map_single_debug
112#endif
113
114
115/* Cable and/or personality module change interrupt service */
116static inline void wanxl_cable_intr(port_t *port)
117{
118 u32 value = get_status(port)->cable;
119 int valid = 1;
120 const char *cable, *pm, *dte = "", *dsr = "", *dcd = "";
121
122 switch(value & 0x7) {
123 case STATUS_CABLE_V35: cable = "V.35"; break;
124 case STATUS_CABLE_X21: cable = "X.21"; break;
125 case STATUS_CABLE_V24: cable = "V.24"; break;
126 case STATUS_CABLE_EIA530: cable = "EIA530"; break;
127 case STATUS_CABLE_NONE: cable = "no"; break;
128 default: cable = "invalid";
129 }
130
131 switch((value >> STATUS_CABLE_PM_SHIFT) & 0x7) {
132 case STATUS_CABLE_V35: pm = "V.35"; break;
133 case STATUS_CABLE_X21: pm = "X.21"; break;
134 case STATUS_CABLE_V24: pm = "V.24"; break;
135 case STATUS_CABLE_EIA530: pm = "EIA530"; break;
136 case STATUS_CABLE_NONE: pm = "no personality"; valid = 0; break;
137 default: pm = "invalid personality"; valid = 0;
138 }
139
140 if (valid) {
141 if ((value & 7) == ((value >> STATUS_CABLE_PM_SHIFT) & 7)) {
142 dsr = (value & STATUS_CABLE_DSR) ? ", DSR ON" :
143 ", DSR off";
144 dcd = (value & STATUS_CABLE_DCD) ? ", carrier ON" :
145 ", carrier off";
146 }
147 dte = (value & STATUS_CABLE_DCE) ? " DCE" : " DTE";
148 }
149 printk(KERN_INFO "%s: %s%s module, %s cable%s%s\n",
150 port->dev->name, pm, dte, cable, dsr, dcd);
151
152 hdlc_set_carrier(value & STATUS_CABLE_DCD, port->dev);
153}
154
155
156
157/* Transmit complete interrupt service */
158static inline void wanxl_tx_intr(port_t *port)
159{
160 struct net_device *dev = port->dev;
161 struct net_device_stats *stats = hdlc_stats(dev);
162 while (1) {
163 desc_t *desc = &get_status(port)->tx_descs[port->tx_in];
164 struct sk_buff *skb = port->tx_skbs[port->tx_in];
165
166 switch (desc->stat) {
167 case PACKET_FULL:
168 case PACKET_EMPTY:
169 netif_wake_queue(dev);
170 return;
171
172 case PACKET_UNDERRUN:
173 stats->tx_errors++;
174 stats->tx_fifo_errors++;
175 break;
176
177 default:
178 stats->tx_packets++;
179 stats->tx_bytes += skb->len;
180 }
181 desc->stat = PACKET_EMPTY; /* Free descriptor */
182 pci_unmap_single(port->card->pdev, desc->address, skb->len,
183 PCI_DMA_TODEVICE);
184 dev_kfree_skb_irq(skb);
185 port->tx_in = (port->tx_in + 1) % TX_BUFFERS;
186 }
187}
188
189
190
191/* Receive complete interrupt service */
192static inline void wanxl_rx_intr(card_t *card)
193{
194 desc_t *desc;
195 while (desc = &card->status->rx_descs[card->rx_in],
196 desc->stat != PACKET_EMPTY) {
197 if ((desc->stat & PACKET_PORT_MASK) > card->n_ports)
198 printk(KERN_CRIT "wanXL %s: received packet for"
199 " nonexistent port\n", pci_name(card->pdev));
200 else {
201 struct sk_buff *skb = card->rx_skbs[card->rx_in];
202 port_t *port = &card->ports[desc->stat &
203 PACKET_PORT_MASK];
204 struct net_device *dev = port->dev;
205 struct net_device_stats *stats = hdlc_stats(dev);
206
207 if (!skb)
208 stats->rx_dropped++;
209 else {
210 pci_unmap_single(card->pdev, desc->address,
211 BUFFER_LENGTH,
212 PCI_DMA_FROMDEVICE);
213 skb_put(skb, desc->length);
214
215#ifdef DEBUG_PKT
216 printk(KERN_DEBUG "%s RX(%i):", dev->name,
217 skb->len);
218 debug_frame(skb);
219#endif
220 stats->rx_packets++;
221 stats->rx_bytes += skb->len;
222 dev->last_rx = jiffies;
223 skb->protocol = hdlc_type_trans(skb, dev);
224 netif_rx(skb);
225 skb = NULL;
226 }
227
228 if (!skb) {
229 skb = dev_alloc_skb(BUFFER_LENGTH);
230 desc->address = skb ?
231 pci_map_single(card->pdev, skb->data,
232 BUFFER_LENGTH,
233 PCI_DMA_FROMDEVICE) : 0;
234 card->rx_skbs[card->rx_in] = skb;
235 }
236 }
237 desc->stat = PACKET_EMPTY; /* Free descriptor */
238 card->rx_in = (card->rx_in + 1) % RX_QUEUE_LENGTH;
239 }
240}
241
242
243
244static irqreturn_t wanxl_intr(int irq, void* dev_id, struct pt_regs *regs)
245{
246 card_t *card = dev_id;
247 int i;
248 u32 stat;
249 int handled = 0;
250
251
252 while((stat = readl(card->plx + PLX_DOORBELL_FROM_CARD)) != 0) {
253 handled = 1;
254 writel(stat, card->plx + PLX_DOORBELL_FROM_CARD);
255
256 for (i = 0; i < card->n_ports; i++) {
257 if (stat & (1 << (DOORBELL_FROM_CARD_TX_0 + i)))
258 wanxl_tx_intr(&card->ports[i]);
259 if (stat & (1 << (DOORBELL_FROM_CARD_CABLE_0 + i)))
260 wanxl_cable_intr(&card->ports[i]);
261 }
262 if (stat & (1 << DOORBELL_FROM_CARD_RX))
263 wanxl_rx_intr(card);
264 }
265
266 return IRQ_RETVAL(handled);
267}
268
269
270
271static int wanxl_xmit(struct sk_buff *skb, struct net_device *dev)
272{
273 port_t *port = dev_to_port(dev);
274 desc_t *desc;
275
276 spin_lock(&port->lock);
277
278 desc = &get_status(port)->tx_descs[port->tx_out];
279 if (desc->stat != PACKET_EMPTY) {
280 /* should never happen - previous xmit should stop queue */
281#ifdef DEBUG_PKT
282 printk(KERN_DEBUG "%s: transmitter buffer full\n", dev->name);
283#endif
284 netif_stop_queue(dev);
285 spin_unlock_irq(&port->lock);
286 return 1; /* request packet to be queued */
287 }
288
289#ifdef DEBUG_PKT
290 printk(KERN_DEBUG "%s TX(%i):", dev->name, skb->len);
291 debug_frame(skb);
292#endif
293
294 port->tx_skbs[port->tx_out] = skb;
295 desc->address = pci_map_single(port->card->pdev, skb->data, skb->len,
296 PCI_DMA_TODEVICE);
297 desc->length = skb->len;
298 desc->stat = PACKET_FULL;
299 writel(1 << (DOORBELL_TO_CARD_TX_0 + port->node),
300 port->card->plx + PLX_DOORBELL_TO_CARD);
301 dev->trans_start = jiffies;
302
303 port->tx_out = (port->tx_out + 1) % TX_BUFFERS;
304
305 if (get_status(port)->tx_descs[port->tx_out].stat != PACKET_EMPTY) {
306 netif_stop_queue(dev);
307#ifdef DEBUG_PKT
308 printk(KERN_DEBUG "%s: transmitter buffer full\n", dev->name);
309#endif
310 }
311
312 spin_unlock(&port->lock);
313 return 0;
314}
315
316
317
318static int wanxl_attach(struct net_device *dev, unsigned short encoding,
319 unsigned short parity)
320{
321 port_t *port = dev_to_port(dev);
322
323 if (encoding != ENCODING_NRZ &&
324 encoding != ENCODING_NRZI)
325 return -EINVAL;
326
327 if (parity != PARITY_NONE &&
328 parity != PARITY_CRC32_PR1_CCITT &&
329 parity != PARITY_CRC16_PR1_CCITT &&
330 parity != PARITY_CRC32_PR0_CCITT &&
331 parity != PARITY_CRC16_PR0_CCITT)
332 return -EINVAL;
333
334 get_status(port)->encoding = encoding;
335 get_status(port)->parity = parity;
336 return 0;
337}
338
339
340
341static int wanxl_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
342{
343 const size_t size = sizeof(sync_serial_settings);
344 sync_serial_settings line;
345 port_t *port = dev_to_port(dev);
346
347 if (cmd != SIOCWANDEV)
348 return hdlc_ioctl(dev, ifr, cmd);
349
350 switch (ifr->ifr_settings.type) {
351 case IF_GET_IFACE:
352 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
353 if (ifr->ifr_settings.size < size) {
354 ifr->ifr_settings.size = size; /* data size wanted */
355 return -ENOBUFS;
356 }
357 line.clock_type = get_status(port)->clocking;
358 line.clock_rate = 0;
359 line.loopback = 0;
360
361 if (copy_to_user(ifr->ifr_settings.ifs_ifsu.sync, &line, size))
362 return -EFAULT;
363 return 0;
364
365 case IF_IFACE_SYNC_SERIAL:
366 if (!capable(CAP_NET_ADMIN))
367 return -EPERM;
368 if (dev->flags & IFF_UP)
369 return -EBUSY;
370
371 if (copy_from_user(&line, ifr->ifr_settings.ifs_ifsu.sync,
372 size))
373 return -EFAULT;
374
375 if (line.clock_type != CLOCK_EXT &&
376 line.clock_type != CLOCK_TXFROMRX)
377 return -EINVAL; /* No such clock setting */
378
379 if (line.loopback != 0)
380 return -EINVAL;
381
382 get_status(port)->clocking = line.clock_type;
383 return 0;
384
385 default:
386 return hdlc_ioctl(dev, ifr, cmd);
387 }
388}
389
390
391
392static int wanxl_open(struct net_device *dev)
393{
394 port_t *port = dev_to_port(dev);
395 u8 __iomem *dbr = port->card->plx + PLX_DOORBELL_TO_CARD;
396 unsigned long timeout;
397 int i;
398
399 if (get_status(port)->open) {
400 printk(KERN_ERR "%s: port already open\n", dev->name);
401 return -EIO;
402 }
403 if ((i = hdlc_open(dev)) != 0)
404 return i;
405
406 port->tx_in = port->tx_out = 0;
407 for (i = 0; i < TX_BUFFERS; i++)
408 get_status(port)->tx_descs[i].stat = PACKET_EMPTY;
409 /* signal the card */
410 writel(1 << (DOORBELL_TO_CARD_OPEN_0 + port->node), dbr);
411
412 timeout = jiffies + HZ;
413 do
414 if (get_status(port)->open) {
415 netif_start_queue(dev);
416 return 0;
417 }
418 while (time_after(timeout, jiffies));
419
420 printk(KERN_ERR "%s: unable to open port\n", dev->name);
421 /* ask the card to close the port, should it be still alive */
422 writel(1 << (DOORBELL_TO_CARD_CLOSE_0 + port->node), dbr);
423 return -EFAULT;
424}
425
426
427
428static int wanxl_close(struct net_device *dev)
429{
430 port_t *port = dev_to_port(dev);
431 unsigned long timeout;
432 int i;
433
434 hdlc_close(dev);
435 /* signal the card */
436 writel(1 << (DOORBELL_TO_CARD_CLOSE_0 + port->node),
437 port->card->plx + PLX_DOORBELL_TO_CARD);
438
439 timeout = jiffies + HZ;
440 do
441 if (!get_status(port)->open)
442 break;
443 while (time_after(timeout, jiffies));
444
445 if (get_status(port)->open)
446 printk(KERN_ERR "%s: unable to close port\n", dev->name);
447
448 netif_stop_queue(dev);
449
450 for (i = 0; i < TX_BUFFERS; i++) {
451 desc_t *desc = &get_status(port)->tx_descs[i];
452
453 if (desc->stat != PACKET_EMPTY) {
454 desc->stat = PACKET_EMPTY;
455 pci_unmap_single(port->card->pdev, desc->address,
456 port->tx_skbs[i]->len,
457 PCI_DMA_TODEVICE);
458 dev_kfree_skb(port->tx_skbs[i]);
459 }
460 }
461 return 0;
462}
463
464
465
466static struct net_device_stats *wanxl_get_stats(struct net_device *dev)
467{
468 struct net_device_stats *stats = hdlc_stats(dev);
469 port_t *port = dev_to_port(dev);
470
471 stats->rx_over_errors = get_status(port)->rx_overruns;
472 stats->rx_frame_errors = get_status(port)->rx_frame_errors;
473 stats->rx_errors = stats->rx_over_errors + stats->rx_frame_errors;
474 return stats;
475}
476
477
478
479static int wanxl_puts_command(card_t *card, u32 cmd)
480{
481 unsigned long timeout = jiffies + 5 * HZ;
482
483 writel(cmd, card->plx + PLX_MAILBOX_1);
484 do {
485 if (readl(card->plx + PLX_MAILBOX_1) == 0)
486 return 0;
487
488 schedule();
489 }while (time_after(timeout, jiffies));
490
491 return -1;
492}
493
494
495
496static void wanxl_reset(card_t *card)
497{
498 u32 old_value = readl(card->plx + PLX_CONTROL) & ~PLX_CTL_RESET;
499
500 writel(0x80, card->plx + PLX_MAILBOX_0);
501 writel(old_value | PLX_CTL_RESET, card->plx + PLX_CONTROL);
502 readl(card->plx + PLX_CONTROL); /* wait for posted write */
503 udelay(1);
504 writel(old_value, card->plx + PLX_CONTROL);
505 readl(card->plx + PLX_CONTROL); /* wait for posted write */
506}
507
508
509
510static void wanxl_pci_remove_one(struct pci_dev *pdev)
511{
512 card_t *card = pci_get_drvdata(pdev);
513 int i;
514
515 for (i = 0; i < card->n_ports; i++) {
516 unregister_hdlc_device(card->ports[i].dev);
517 free_netdev(card->ports[i].dev);
518 }
519
520 /* unregister and free all host resources */
521 if (card->irq)
522 free_irq(card->irq, card);
523
524 wanxl_reset(card);
525
526 for (i = 0; i < RX_QUEUE_LENGTH; i++)
527 if (card->rx_skbs[i]) {
528 pci_unmap_single(card->pdev,
529 card->status->rx_descs[i].address,
530 BUFFER_LENGTH, PCI_DMA_FROMDEVICE);
531 dev_kfree_skb(card->rx_skbs[i]);
532 }
533
534 if (card->plx)
535 iounmap(card->plx);
536
537 if (card->status)
538 pci_free_consistent(pdev, sizeof(card_status_t),
539 card->status, card->status_address);
540
541 pci_release_regions(pdev);
542 pci_disable_device(pdev);
543 pci_set_drvdata(pdev, NULL);
544 kfree(card);
545}
546
547
548#include "wanxlfw.inc"
549
550static int __devinit wanxl_pci_init_one(struct pci_dev *pdev,
551 const struct pci_device_id *ent)
552{
553 card_t *card;
554 u32 ramsize, stat;
555 unsigned long timeout;
556 u32 plx_phy; /* PLX PCI base address */
557 u32 mem_phy; /* memory PCI base addr */
558 u8 __iomem *mem; /* memory virtual base addr */
559 int i, ports, alloc_size;
560
561#ifndef MODULE
562 static int printed_version;
563 if (!printed_version) {
564 printed_version++;
565 printk(KERN_INFO "%s\n", version);
566 }
567#endif
568
569 i = pci_enable_device(pdev);
570 if (i)
571 return i;
572
573 /* QUICC can only access first 256 MB of host RAM directly,
574 but PLX9060 DMA does 32-bits for actual packet data transfers */
575
576 /* FIXME when PCI/DMA subsystems are fixed.
577 We set both dma_mask and consistent_dma_mask to 28 bits
578 and pray pci_alloc_consistent() will use this info. It should
579 work on most platforms */
910638ae
MG		 580 if (pci_set_consistent_dma_mask(pdev, DMA_28BIT_MASK) ||
581 pci_set_dma_mask(pdev, DMA_28BIT_MASK)) {
1da177e4
LT		 582 printk(KERN_ERR "wanXL: No usable DMA configuration\n");
583 return -EIO;
584 }
585
586 i = pci_request_regions(pdev, "wanXL");
587 if (i) {
588 pci_disable_device(pdev);
589 return i;
590 }
591
592 switch (pdev->device) {
593 case PCI_DEVICE_ID_SBE_WANXL100: ports = 1; break;
594 case PCI_DEVICE_ID_SBE_WANXL200: ports = 2; break;
595 default: ports = 4;
596 }
597
598 alloc_size = sizeof(card_t) + ports * sizeof(port_t);
599 card = kmalloc(alloc_size, GFP_KERNEL);
600 if (card == NULL) {
601 printk(KERN_ERR "wanXL %s: unable to allocate memory\n",
602 pci_name(pdev));
603 pci_release_regions(pdev);
604 pci_disable_device(pdev);
605 return -ENOBUFS;
606 }
607 memset(card, 0, alloc_size);
608
609 pci_set_drvdata(pdev, card);
610 card->pdev = pdev;
611
612 card->status = pci_alloc_consistent(pdev, sizeof(card_status_t),
613 &card->status_address);
614 if (card->status == NULL) {
615 wanxl_pci_remove_one(pdev);
616 return -ENOBUFS;
617 }
618
619#ifdef DEBUG_PCI
620 printk(KERN_DEBUG "wanXL %s: pci_alloc_consistent() returned memory"
621 " at 0x%LX\n", pci_name(pdev),
622 (unsigned long long)card->status_address);
623#endif
624
625 /* FIXME when PCI/DMA subsystems are fixed.
626 We set both dma_mask and consistent_dma_mask back to 32 bits
627 to indicate the card can do 32-bit DMA addressing */
1e7f0bd8
DP		 628 if (pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK) ||
629 pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
1da177e4
LT		 630 printk(KERN_ERR "wanXL: No usable DMA configuration\n");
631 wanxl_pci_remove_one(pdev);
632 return -EIO;
633 }
634
635 /* set up PLX mapping */
636 plx_phy = pci_resource_start(pdev, 0);
4446065a 637
1da177e4 638 card->plx = ioremap_nocache(plx_phy, 0x70);
4446065a
KH		 639 if (!card->plx) {
640 printk(KERN_ERR "wanxl: ioremap() failed\n");
641 wanxl_pci_remove_one(pdev);
642 return -EFAULT;
643 }
1da177e4
LT		 644
645#if RESET_WHILE_LOADING
646 wanxl_reset(card);
647#endif
648
649 timeout = jiffies + 20 * HZ;
650 while ((stat = readl(card->plx + PLX_MAILBOX_0)) != 0) {
651 if (time_before(timeout, jiffies)) {
652 printk(KERN_WARNING "wanXL %s: timeout waiting for"
653 " PUTS to complete\n", pci_name(pdev));
654 wanxl_pci_remove_one(pdev);
655 return -ENODEV;
656 }
657
658 switch(stat & 0xC0) {
659 case 0x00: /* hmm - PUTS completed with non-zero code? */
660 case 0x80: /* PUTS still testing the hardware */
661 break;
662
663 default:
664 printk(KERN_WARNING "wanXL %s: PUTS test 0x%X"
665 " failed\n", pci_name(pdev), stat & 0x30);
666 wanxl_pci_remove_one(pdev);
667 return -ENODEV;
668 }
669
670 schedule();
671 }
672
673 /* get on-board memory size (PUTS detects no more than 4 MB) */
674 ramsize = readl(card->plx + PLX_MAILBOX_2) & MBX2_MEMSZ_MASK;
675
676 /* set up on-board RAM mapping */
677 mem_phy = pci_resource_start(pdev, 2);
678
679
680 /* sanity check the board's reported memory size */
681 if (ramsize < BUFFERS_ADDR +
682 (TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports) {
683 printk(KERN_WARNING "wanXL %s: no enough on-board RAM"
684 " (%u bytes detected, %u bytes required)\n",
685 pci_name(pdev), ramsize, BUFFERS_ADDR +
686 (TX_BUFFERS + RX_BUFFERS) * BUFFER_LENGTH * ports);
687 wanxl_pci_remove_one(pdev);
688 return -ENODEV;
689 }
690
691 if (wanxl_puts_command(card, MBX1_CMD_BSWAP)) {
692 printk(KERN_WARNING "wanXL %s: unable to Set Byte Swap"
693 " Mode\n", pci_name(pdev));
694 wanxl_pci_remove_one(pdev);
695 return -ENODEV;
696 }
697
698 for (i = 0; i < RX_QUEUE_LENGTH; i++) {
699 struct sk_buff *skb = dev_alloc_skb(BUFFER_LENGTH);
700 card->rx_skbs[i] = skb;
701 if (skb)
702 card->status->rx_descs[i].address =
703 pci_map_single(card->pdev, skb->data,
704 BUFFER_LENGTH,
705 PCI_DMA_FROMDEVICE);
706 }
707
708 mem = ioremap_nocache(mem_phy, PDM_OFFSET + sizeof(firmware));
4446065a
KH		 709 if (!mem) {
710 printk(KERN_ERR "wanxl: ioremap() failed\n");
711 wanxl_pci_remove_one(pdev);
712 return -EFAULT;
713 }
714
1da177e4
LT		 715 for (i = 0; i < sizeof(firmware); i += 4)
716 writel(htonl(*(u32*)(firmware + i)), mem + PDM_OFFSET + i);
717
718 for (i = 0; i < ports; i++)
719 writel(card->status_address +
720 (void *)&card->status->port_status[i] -
721 (void *)card->status, mem + PDM_OFFSET + 4 + i * 4);
722 writel(card->status_address, mem + PDM_OFFSET + 20);
723 writel(PDM_OFFSET, mem);
724 iounmap(mem);
725
726 writel(0, card->plx + PLX_MAILBOX_5);
727
728 if (wanxl_puts_command(card, MBX1_CMD_ABORTJ)) {
729 printk(KERN_WARNING "wanXL %s: unable to Abort and Jump\n",
730 pci_name(pdev));
731 wanxl_pci_remove_one(pdev);
732 return -ENODEV;
733 }
734
735 stat = 0;
736 timeout = jiffies + 5 * HZ;
737 do {
738 if ((stat = readl(card->plx + PLX_MAILBOX_5)) != 0)
739 break;
740 schedule();
741 }while (time_after(timeout, jiffies));
742
743 if (!stat) {
744 printk(KERN_WARNING "wanXL %s: timeout while initializing card"
745 "firmware\n", pci_name(pdev));
746 wanxl_pci_remove_one(pdev);
747 return -ENODEV;
748 }
749
750#if DETECT_RAM
751 ramsize = stat;
752#endif
753
754 printk(KERN_INFO "wanXL %s: at 0x%X, %u KB of RAM at 0x%X, irq %u\n",
755 pci_name(pdev), plx_phy, ramsize / 1024, mem_phy, pdev->irq);
756
757 /* Allocate IRQ */
1fb9df5d 758 if (request_irq(pdev->irq, wanxl_intr, IRQF_SHARED, "wanXL", card)) {
1da177e4
LT		 759 printk(KERN_WARNING "wanXL %s: could not allocate IRQ%i.\n",
760 pci_name(pdev), pdev->irq);
761 wanxl_pci_remove_one(pdev);
762 return -EBUSY;
763 }
764 card->irq = pdev->irq;
765
766 for (i = 0; i < ports; i++) {
767 hdlc_device *hdlc;
768 port_t *port = &card->ports[i];
769 struct net_device *dev = alloc_hdlcdev(port);
770 if (!dev) {
771 printk(KERN_ERR "wanXL %s: unable to allocate"
772 " memory\n", pci_name(pdev));
773 wanxl_pci_remove_one(pdev);
774 return -ENOMEM;
775 }
776
777 port->dev = dev;
778 hdlc = dev_to_hdlc(dev);
779 spin_lock_init(&port->lock);
780 SET_MODULE_OWNER(dev);
781 dev->tx_queue_len = 50;
782 dev->do_ioctl = wanxl_ioctl;
783 dev->open = wanxl_open;
784 dev->stop = wanxl_close;
785 hdlc->attach = wanxl_attach;
786 hdlc->xmit = wanxl_xmit;
787 dev->get_stats = wanxl_get_stats;
788 port->card = card;
789 port->node = i;
790 get_status(port)->clocking = CLOCK_EXT;
791 if (register_hdlc_device(dev)) {
792 printk(KERN_ERR "wanXL %s: unable to register hdlc"
793 " device\n", pci_name(pdev));
794 free_netdev(dev);
795 wanxl_pci_remove_one(pdev);
796 return -ENOBUFS;
797 }
798 card->n_ports++;
799 }
800
801 printk(KERN_INFO "wanXL %s: port", pci_name(pdev));
802 for (i = 0; i < ports; i++)
803 printk("%s #%i: %s", i ? "," : "", i,
804 card->ports[i].dev->name);
805 printk("\n");
806
807 for (i = 0; i < ports; i++)
808 wanxl_cable_intr(&card->ports[i]); /* get carrier status etc.*/
809
810 return 0;
811}
812
813static struct pci_device_id wanxl_pci_tbl[] __devinitdata = {
814 { PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL100, PCI_ANY_ID,
815 PCI_ANY_ID, 0, 0, 0 },
816 { PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL200, PCI_ANY_ID,
817 PCI_ANY_ID, 0, 0, 0 },
818 { PCI_VENDOR_ID_SBE, PCI_DEVICE_ID_SBE_WANXL400, PCI_ANY_ID,
819 PCI_ANY_ID, 0, 0, 0 },
820 { 0, }
821};
822
823
824static struct pci_driver wanxl_pci_driver = {
825 .name = "wanXL",
826 .id_table = wanxl_pci_tbl,
827 .probe = wanxl_pci_init_one,
828 .remove = wanxl_pci_remove_one,
829};
830
831
832static int __init wanxl_init_module(void)
833{
834#ifdef MODULE
835 printk(KERN_INFO "%s\n", version);
836#endif
837 return pci_module_init(&wanxl_pci_driver);
838}
839
840static void __exit wanxl_cleanup_module(void)
841{
842 pci_unregister_driver(&wanxl_pci_driver);
843}
844
845
846MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
847MODULE_DESCRIPTION("SBE Inc. wanXL serial port driver");
848MODULE_LICENSE("GPL v2");
849MODULE_DEVICE_TABLE(pci, wanxl_pci_tbl);
850
851module_init(wanxl_init_module);
852module_exit(wanxl_cleanup_module);
Clone of davem's net-next-2.6 tree