]> bbs.cooldavid.org Git - net-next-2.6.git/blame - drivers/net/hp-plus.c
git://bbs.cooldavid.org / net-next-2.6.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
xps: Transmit Packet Steering
[net-next-2.6.git] / drivers / net / hp-plus.c
CommitLineData
1da177e4
LT		 1/* hp-plus.c: A HP PCLAN/plus ethernet driver for linux. */
2/*
3 Written 1994 by Donald Becker.
4
5 This driver is for the Hewlett Packard PC LAN (27***) plus ethercards.
6 These cards are sold under several model numbers, usually 2724*.
7
8 This software may be used and distributed according to the terms
9 of the GNU General Public License, incorporated herein by reference.
10
11 The author may be reached as becker@scyld.com, or C/O
12 Scyld Computing Corporation
13 410 Severn Ave., Suite 210
14 Annapolis MD 21403
15
16 As is often the case, a great deal of credit is owed to Russ Nelson.
17 The Crynwr packet driver was my primary source of HP-specific
18 programming information.
19*/
20
21static const char version[] =
22"hp-plus.c:v1.10 9/24/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
23
24#include <linux/module.h>
25
26#include <linux/string.h> /* Important -- this inlines word moves. */
27#include <linux/kernel.h>
28#include <linux/errno.h>
29#include <linux/ioport.h>
30#include <linux/netdevice.h>
31#include <linux/etherdevice.h>
32#include <linux/init.h>
33#include <linux/delay.h>
34
35#include <asm/system.h>
36#include <asm/io.h>
37
38#include "8390.h"
39
40#define DRV_NAME "hp-plus"
41
42/* A zero-terminated list of I/O addresses to be probed. */
43static unsigned int hpplus_portlist[] __initdata =
44{0x200, 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340, 0};
45
46/*
47 The HP EtherTwist chip implementation is a fairly routine DP8390
48 implementation. It allows both shared memory and programmed-I/O buffer
49 access, using a custom interface for both. The programmed-I/O mode is
50 entirely implemented in the HP EtherTwist chip, bypassing the problem
51 ridden built-in 8390 facilities used on NE2000 designs. The shared
52 memory mode is likewise special, with an offset register used to make
53 packets appear at the shared memory base. Both modes use a base and bounds
54 page register to hide the Rx ring buffer wrap -- a packet that spans the
55 end of physical buffer memory appears continuous to the driver. (c.f. the
56 3c503 and Cabletron E2100)
57
58 A special note: the internal buffer of the board is only 8 bits wide.
59 This lays several nasty traps for the unaware:
60 - the 8390 must be programmed for byte-wide operations
61 - all I/O and memory operations must work on whole words (the access
62 latches are serially preloaded and have no byte-swapping ability).
63
64 This board is laid out in I/O space much like the earlier HP boards:
65 the first 16 locations are for the board registers, and the second 16 are
66 for the 8390. The board is easy to identify, with both a dedicated 16 bit
67 ID register and a constant 0x530* value in the upper bits of the paging
68 register.
69*/
70
71#define HP_ID 0x00 /* ID register, always 0x4850. */
72#define HP_PAGING 0x02 /* Registers visible @ 8-f, see PageName. */
73#define HPP_OPTION 0x04 /* Bitmapped options, see HP_Option. */
74#define HPP_OUT_ADDR 0x08 /* I/O output location in Perf_Page. */
75#define HPP_IN_ADDR 0x0A /* I/O input location in Perf_Page. */
76#define HP_DATAPORT 0x0c /* I/O data transfer in Perf_Page. */
77#define NIC_OFFSET 0x10 /* Offset to the 8390 registers. */
78#define HP_IO_EXTENT 32
79
80#define HP_START_PG 0x00 /* First page of TX buffer */
81#define HP_STOP_PG 0x80 /* Last page +1 of RX ring */
82
83/* The register set selected in HP_PAGING. */
84enum PageName {
85 Perf_Page = 0, /* Normal operation. */
86 MAC_Page = 1, /* The ethernet address (+checksum). */
87 HW_Page = 2, /* EEPROM-loaded hardware parameters. */
88 LAN_Page = 4, /* Transceiver selection, testing, etc. */
89 ID_Page = 6 };
90
91/* The bit definitions for the HPP_OPTION register. */
92enum HP_Option {
93 NICReset = 1, ChipReset = 2, /* Active low, really UNreset. */
94 EnableIRQ = 4, FakeIntr = 8, BootROMEnb = 0x10, IOEnb = 0x20,
95 MemEnable = 0x40, ZeroWait = 0x80, MemDisable = 0x1000, };
96
97static int hpp_probe1(struct net_device *dev, int ioaddr);
98
99static void hpp_reset_8390(struct net_device *dev);
100static int hpp_open(struct net_device *dev);
101static int hpp_close(struct net_device *dev);
102static void hpp_mem_block_input(struct net_device *dev, int count,
103 struct sk_buff *skb, int ring_offset);
104static void hpp_mem_block_output(struct net_device *dev, int count,
105 const unsigned char *buf, int start_page);
106static void hpp_mem_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
107 int ring_page);
108static void hpp_io_block_input(struct net_device *dev, int count,
109 struct sk_buff *skb, int ring_offset);
110static void hpp_io_block_output(struct net_device *dev, int count,
111 const unsigned char *buf, int start_page);
112static void hpp_io_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
113 int ring_page);
114
6aa20a22 115
1da177e4
LT		 116/* Probe a list of addresses for an HP LAN+ adaptor.
117 This routine is almost boilerplate. */
118
119static int __init do_hpp_probe(struct net_device *dev)
120{
121 int i;
122 int base_addr = dev->base_addr;
123 int irq = dev->irq;
124
1da177e4
LT		 125 if (base_addr > 0x1ff) /* Check a single specified location. */
126 return hpp_probe1(dev, base_addr);
127 else if (base_addr != 0) /* Don't probe at all. */
128 return -ENXIO;
129
130 for (i = 0; hpplus_portlist[i]; i++) {
131 if (hpp_probe1(dev, hpplus_portlist[i]) == 0)
132 return 0;
133 dev->irq = irq;
134 }
135
136 return -ENODEV;
137}
138
1da177e4
LT		 139#ifndef MODULE
140struct net_device * __init hp_plus_probe(int unit)
141{
49f276be 142 struct net_device *dev = alloc_eip_netdev();
1da177e4
LT		 143 int err;
144
145 if (!dev)
146 return ERR_PTR(-ENOMEM);
147
148 sprintf(dev->name, "eth%d", unit);
149 netdev_boot_setup_check(dev);
150
151 err = do_hpp_probe(dev);
152 if (err)
153 goto out;
1da177e4 154 return dev;
1da177e4
LT		 155out:
156 free_netdev(dev);
157 return ERR_PTR(err);
158}
159#endif
160
d4a97d42
SH		 161static const struct net_device_ops hpp_netdev_ops = {
162 .ndo_open = hpp_open,
163 .ndo_stop = hpp_close,
5b9ab2ec
DM		 164 .ndo_start_xmit = eip_start_xmit,
165 .ndo_tx_timeout = eip_tx_timeout,
166 .ndo_get_stats = eip_get_stats,
167 .ndo_set_multicast_list = eip_set_multicast_list,
d4a97d42 168 .ndo_validate_addr = eth_validate_addr,
fe96aaa1 169 .ndo_set_mac_address = eth_mac_addr,
d4a97d42
SH		 170 .ndo_change_mtu = eth_change_mtu,
171#ifdef CONFIG_NET_POLL_CONTROLLER
5b9ab2ec 172 .ndo_poll_controller = eip_poll,
d4a97d42
SH		 173#endif
174};
175
176
1da177e4
LT		 177/* Do the interesting part of the probe at a single address. */
178static int __init hpp_probe1(struct net_device *dev, int ioaddr)
179{
180 int i, retval;
181 unsigned char checksum = 0;
182 const char name[] = "HP-PC-LAN+";
183 int mem_start;
184 static unsigned version_printed;
185
186 if (!request_region(ioaddr, HP_IO_EXTENT, DRV_NAME))
187 return -EBUSY;
188
189 /* Check for the HP+ signature, 50 48 0x 53. */
8e95a202
JP		 190 if (inw(ioaddr + HP_ID) != 0x4850 ||
191 (inw(ioaddr + HP_PAGING) & 0xfff0) != 0x5300) {
1da177e4
LT		 192 retval = -ENODEV;
193 goto out;
194 }
195
196 if (ei_debug && version_printed++ == 0)
197 printk(version);
198
0795af57 199 printk("%s: %s at %#3x, ", dev->name, name, ioaddr);
1da177e4
LT		 200
201 /* Retrieve and checksum the station address. */
202 outw(MAC_Page, ioaddr + HP_PAGING);
203
204 for(i = 0; i < ETHER_ADDR_LEN; i++) {
205 unsigned char inval = inb(ioaddr + 8 + i);
206 dev->dev_addr[i] = inval;
207 checksum += inval;
1da177e4
LT		 208 }
209 checksum += inb(ioaddr + 14);
210
e174961c 211 printk("%pM", dev->dev_addr);
0795af57 212
1da177e4
LT		 213 if (checksum != 0xff) {
214 printk(" bad checksum %2.2x.\n", checksum);
215 retval = -ENODEV;
216 goto out;
217 } else {
218 /* Point at the Software Configuration Flags. */
219 outw(ID_Page, ioaddr + HP_PAGING);
220 printk(" ID %4.4x", inw(ioaddr + 12));
221 }
222
223 /* Read the IRQ line. */
224 outw(HW_Page, ioaddr + HP_PAGING);
225 {
226 int irq = inb(ioaddr + 13) & 0x0f;
227 int option = inw(ioaddr + HPP_OPTION);
228
229 dev->irq = irq;
230 if (option & MemEnable) {
231 mem_start = inw(ioaddr + 9) << 8;
232 printk(", IRQ %d, memory address %#x.\n", irq, mem_start);
233 } else {
234 mem_start = 0;
235 printk(", IRQ %d, programmed-I/O mode.\n", irq);
236 }
237 }
238
239 /* Set the wrap registers for string I/O reads. */
240 outw((HP_START_PG + TX_PAGES/2) | ((HP_STOP_PG - 1) << 8), ioaddr + 14);
241
242 /* Set the base address to point to the NIC, not the "real" base! */
243 dev->base_addr = ioaddr + NIC_OFFSET;
244
d4a97d42 245 dev->netdev_ops = &hpp_netdev_ops;
1da177e4
LT		 246
247 ei_status.name = name;
248 ei_status.word16 = 0; /* Agggghhhhh! Debug time: 2 days! */
249 ei_status.tx_start_page = HP_START_PG;
250 ei_status.rx_start_page = HP_START_PG + TX_PAGES/2;
251 ei_status.stop_page = HP_STOP_PG;
252
253 ei_status.reset_8390 = &hpp_reset_8390;
254 ei_status.block_input = &hpp_io_block_input;
255 ei_status.block_output = &hpp_io_block_output;
256 ei_status.get_8390_hdr = &hpp_io_get_8390_hdr;
257
258 /* Check if the memory_enable flag is set in the option register. */
259 if (mem_start) {
260 ei_status.block_input = &hpp_mem_block_input;
261 ei_status.block_output = &hpp_mem_block_output;
262 ei_status.get_8390_hdr = &hpp_mem_get_8390_hdr;
263 dev->mem_start = mem_start;
b336cea3
AV		 264 ei_status.mem = ioremap(mem_start,
265 (HP_STOP_PG - HP_START_PG)*256);
266 if (!ei_status.mem) {
267 retval = -ENOMEM;
268 goto out;
269 }
1da177e4
LT		 270 ei_status.rmem_start = dev->mem_start + TX_PAGES/2*256;
271 dev->mem_end = ei_status.rmem_end
272 = dev->mem_start + (HP_STOP_PG - HP_START_PG)*256;
273 }
274
275 outw(Perf_Page, ioaddr + HP_PAGING);
f0084a36 276 NS8390p_init(dev, 0);
1da177e4
LT		 277 /* Leave the 8390 and HP chip reset. */
278 outw(inw(ioaddr + HPP_OPTION) & ~EnableIRQ, ioaddr + HPP_OPTION);
279
b1fc5505
HX		 280 retval = register_netdev(dev);
281 if (retval)
b336cea3 282 goto out1;
1da177e4 283 return 0;
b336cea3
AV		 284out1:
285 iounmap(ei_status.mem);
1da177e4
LT		 286out:
287 release_region(ioaddr, HP_IO_EXTENT);
288 return retval;
289}
290
291static int
292hpp_open(struct net_device *dev)
293{
294 int ioaddr = dev->base_addr - NIC_OFFSET;
295 int option_reg;
296 int retval;
297
49f276be 298 if ((retval = request_irq(dev->irq, eip_interrupt, 0, dev->name, dev))) {
1da177e4
LT		 299 return retval;
300 }
301
302 /* Reset the 8390 and HP chip. */
303 option_reg = inw(ioaddr + HPP_OPTION);
304 outw(option_reg & ~(NICReset + ChipReset), ioaddr + HPP_OPTION);
305 udelay(5);
306 /* Unreset the board and enable interrupts. */
307 outw(option_reg | (EnableIRQ + NICReset + ChipReset), ioaddr + HPP_OPTION);
308
309 /* Set the wrap registers for programmed-I/O operation. */
310 outw(HW_Page, ioaddr + HP_PAGING);
311 outw((HP_START_PG + TX_PAGES/2) | ((HP_STOP_PG - 1) << 8), ioaddr + 14);
312
313 /* Select the operational page. */
314 outw(Perf_Page, ioaddr + HP_PAGING);
315
d4a97d42 316 return eip_open(dev);
1da177e4
LT		 317}
318
319static int
320hpp_close(struct net_device *dev)
321{
322 int ioaddr = dev->base_addr - NIC_OFFSET;
323 int option_reg = inw(ioaddr + HPP_OPTION);
324
325 free_irq(dev->irq, dev);
49f276be 326 eip_close(dev);
1da177e4
LT		 327 outw((option_reg & ~EnableIRQ) | MemDisable | NICReset | ChipReset,
328 ioaddr + HPP_OPTION);
329
330 return 0;
331}
332
333static void
334hpp_reset_8390(struct net_device *dev)
335{
336 int ioaddr = dev->base_addr - NIC_OFFSET;
337 int option_reg = inw(ioaddr + HPP_OPTION);
338
339 if (ei_debug > 1) printk("resetting the 8390 time=%ld...", jiffies);
340
341 outw(option_reg & ~(NICReset + ChipReset), ioaddr + HPP_OPTION);
342 /* Pause a few cycles for the hardware reset to take place. */
343 udelay(5);
344 ei_status.txing = 0;
345 outw(option_reg | (EnableIRQ + NICReset + ChipReset), ioaddr + HPP_OPTION);
346
347 udelay(5);
348
349
350 if ((inb_p(ioaddr+NIC_OFFSET+EN0_ISR) & ENISR_RESET) == 0)
351 printk("%s: hp_reset_8390() did not complete.\n", dev->name);
352
353 if (ei_debug > 1) printk("8390 reset done (%ld).", jiffies);
1da177e4
LT		 354}
355
356/* The programmed-I/O version of reading the 4 byte 8390 specific header.
357 Note that transfer with the EtherTwist+ must be on word boundaries. */
358
359static void
360hpp_io_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
361{
362 int ioaddr = dev->base_addr - NIC_OFFSET;
363
364 outw((ring_page<<8), ioaddr + HPP_IN_ADDR);
365 insw(ioaddr + HP_DATAPORT, hdr, sizeof(struct e8390_pkt_hdr)>>1);
366}
367
368/* Block input and output, similar to the Crynwr packet driver. */
369
370static void
371hpp_io_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
372{
373 int ioaddr = dev->base_addr - NIC_OFFSET;
374 char *buf = skb->data;
375
376 outw(ring_offset, ioaddr + HPP_IN_ADDR);
377 insw(ioaddr + HP_DATAPORT, buf, count>>1);
378 if (count & 0x01)
379 buf[count-1] = inw(ioaddr + HP_DATAPORT);
380}
381
382/* The corresponding shared memory versions of the above 2 functions. */
383
384static void
385hpp_mem_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
386{
387 int ioaddr = dev->base_addr - NIC_OFFSET;
388 int option_reg = inw(ioaddr + HPP_OPTION);
389
390 outw((ring_page<<8), ioaddr + HPP_IN_ADDR);
391 outw(option_reg & ~(MemDisable + BootROMEnb), ioaddr + HPP_OPTION);
b336cea3 392 memcpy_fromio(hdr, ei_status.mem, sizeof(struct e8390_pkt_hdr));
1da177e4
LT		 393 outw(option_reg, ioaddr + HPP_OPTION);
394 hdr->count = (le16_to_cpu(hdr->count) + 3) & ~3; /* Round up allocation. */
395}
396
397static void
398hpp_mem_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset)
399{
400 int ioaddr = dev->base_addr - NIC_OFFSET;
401 int option_reg = inw(ioaddr + HPP_OPTION);
402
403 outw(ring_offset, ioaddr + HPP_IN_ADDR);
404
405 outw(option_reg & ~(MemDisable + BootROMEnb), ioaddr + HPP_OPTION);
406
407 /* Caution: this relies on get_8390_hdr() rounding up count!
408 Also note that we *can't* use eth_io_copy_and_sum() because
409 it will not always copy "count" bytes (e.g. padded IP). */
410
b336cea3 411 memcpy_fromio(skb->data, ei_status.mem, count);
1da177e4
LT		 412 outw(option_reg, ioaddr + HPP_OPTION);
413}
414
415/* A special note: we *must* always transfer >=16 bit words.
416 It's always safe to round up, so we do. */
417static void
418hpp_io_block_output(struct net_device *dev, int count,
419 const unsigned char *buf, int start_page)
420{
421 int ioaddr = dev->base_addr - NIC_OFFSET;
422 outw(start_page << 8, ioaddr + HPP_OUT_ADDR);
423 outsl(ioaddr + HP_DATAPORT, buf, (count+3)>>2);
1da177e4
LT		 424}
425
426static void
427hpp_mem_block_output(struct net_device *dev, int count,
428 const unsigned char *buf, int start_page)
429{
430 int ioaddr = dev->base_addr - NIC_OFFSET;
431 int option_reg = inw(ioaddr + HPP_OPTION);
432
433 outw(start_page << 8, ioaddr + HPP_OUT_ADDR);
434 outw(option_reg & ~(MemDisable + BootROMEnb), ioaddr + HPP_OPTION);
b336cea3 435 memcpy_toio(ei_status.mem, buf, (count + 3) & ~3);
1da177e4 436 outw(option_reg, ioaddr + HPP_OPTION);
1da177e4
LT		 437}
438
6aa20a22 439
1da177e4
LT		 440#ifdef MODULE
441#define MAX_HPP_CARDS 4 /* Max number of HPP cards per module */
442static struct net_device *dev_hpp[MAX_HPP_CARDS];
443static int io[MAX_HPP_CARDS];
444static int irq[MAX_HPP_CARDS];
445
446module_param_array(io, int, NULL, 0);
447module_param_array(irq, int, NULL, 0);
448MODULE_PARM_DESC(io, "I/O port address(es)");
449MODULE_PARM_DESC(irq, "IRQ number(s); ignored if properly detected");
450MODULE_DESCRIPTION("HP PC-LAN+ ISA ethernet driver");
451MODULE_LICENSE("GPL");
452
453/* This is set up so that only a single autoprobe takes place per call.
454ISA device autoprobes on a running machine are not recommended. */
29f9f6d2 455int __init
1da177e4
LT		 456init_module(void)
457{
458 struct net_device *dev;
459 int this_dev, found = 0;
460
461 for (this_dev = 0; this_dev < MAX_HPP_CARDS; this_dev++) {
462 if (io[this_dev] == 0) {
463 if (this_dev != 0) break; /* only autoprobe 1st one */
464 printk(KERN_NOTICE "hp-plus.c: Presently autoprobing (not recommended) for a single card.\n");
465 }
9b58027b 466 dev = alloc_eip_netdev();
1da177e4
LT		 467 if (!dev)
468 break;
469 dev->irq = irq[this_dev];
470 dev->base_addr = io[this_dev];
471 if (do_hpp_probe(dev) == 0) {
b1fc5505
HX		 472 dev_hpp[found++] = dev;
473 continue;
1da177e4
LT		 474 }
475 free_netdev(dev);
476 printk(KERN_WARNING "hp-plus.c: No HP-Plus card found (i/o = 0x%x).\n", io[this_dev]);
477 break;
478 }
479 if (found)
480 return 0;
481 return -ENXIO;
482}
483
64916f1e
DV		 484static void cleanup_card(struct net_device *dev)
485{
486 /* NB: hpp_close() handles free_irq */
b336cea3 487 iounmap(ei_status.mem);
64916f1e
DV		 488 release_region(dev->base_addr - NIC_OFFSET, HP_IO_EXTENT);
489}
490
afc8eb46 491void __exit
1da177e4
LT		 492cleanup_module(void)
493{
494 int this_dev;
495
496 for (this_dev = 0; this_dev < MAX_HPP_CARDS; this_dev++) {
497 struct net_device *dev = dev_hpp[this_dev];
498 if (dev) {
499 unregister_netdev(dev);
500 cleanup_card(dev);
501 free_netdev(dev);
502 }
503 }
504}
505#endif /* MODULE */
Clone of davem's net-next-2.6 tree