[net-next-2.6.git] / drivers / mfd / Kconfig

#
# Multifunction miscellaneous devices
#

menu "Multifunction device drivers"
	depends on HAS_IOMEM

config MFD_CORE
	tristate
	default n

config MFD_SM501
	tristate "Support for Silicon Motion SM501"
	 ---help---
	  This is the core driver for the Silicon Motion SM501 multimedia
	  companion chip. This device is a multifunction device which may
	  provide numerous interfaces including USB host controller, USB gadget,
	  asynchronous serial ports, audio functions, and a dual display video
	  interface. The device may be connected by PCI or local bus with
	  varying functions enabled.

config MFD_SM501_GPIO
	bool "Export GPIO via GPIO layer"
	depends on MFD_SM501 && GPIOLIB
	 ---help---
	 This option uses the gpio library layer to export the 64 GPIO
	 lines on the SM501. The platform data is used to supply the
	 base number for the first GPIO line to register.

config MFD_ASIC3
	bool "Support for Compaq ASIC3"
	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
	select MFD_CORE
	 ---help---
	  This driver supports the ASIC3 multifunction chip found on many
	  PDAs (mainly iPAQ and HTC based ones)

config MFD_SH_MOBILE_SDHI
	bool "Support for SuperH Mobile SDHI"
	depends on SUPERH
	select MFD_CORE
	 ---help---
	  This driver supports the SDHI hardware block found in many
	  SuperH Mobile SoCs.

config MFD_DM355EVM_MSP
	bool "DaVinci DM355 EVM microcontroller"
	depends on I2C && MACH_DAVINCI_DM355_EVM
	help
	  This driver supports the MSP430 microcontroller used on these
	  boards.  MSP430 firmware manages resets and power sequencing,
	  inputs from buttons and the IR remote, LEDs, an RTC, and more.

config HTC_EGPIO
	bool "HTC EGPIO support"
	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
	help
	    This driver supports the CPLD egpio chip present on
	    several HTC phones.  It provides basic support for input
	    pins, output pins, and irqs.

config HTC_PASIC3
	tristate "HTC PASIC3 LED/DS1WM chip support"
	select MFD_CORE
	help
	  This core driver provides register access for the LED/DS1WM
	  chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
	  HTC Magician devices, respectively. Actual functionality is
	  handled by the leds-pasic3 and ds1wm drivers.

config UCB1400_CORE
	tristate "Philips UCB1400 Core driver"
	depends on AC97_BUS
	depends on GPIOLIB
	help
	  This enables support for the Philips UCB1400 core functions.
	  The UCB1400 is an AC97 audio codec.

	  To compile this driver as a module, choose M here: the
	  module will be called ucb1400_core.

config TPS65010
	tristate "TPS6501x Power Management chips"
	depends on I2C && GPIOLIB
	default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
	help
	  If you say yes here you get support for the TPS6501x series of
	  Power Management chips.  These include voltage regulators,
	  lithium ion/polymer battery charging, and other features that
	  are often used in portable devices like cell phones and cameras.

	  This driver can also be built as a module.  If so, the module
	  will be called tps65010.

config MENELAUS
	bool "Texas Instruments TWL92330/Menelaus PM chip"
	depends on I2C=y && ARCH_OMAP2
	help
	  If you say yes here you get support for the Texas Instruments
	  TWL92330/Menelaus Power Management chip. This include voltage
	  regulators, Dual slot memory card transceivers, real-time clock
	  and other features that are often used in portable devices like
	  cell phones and PDAs.

config TWL4030_CORE
	bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
	depends on I2C=y && GENERIC_HARDIRQS
	help
	  Say yes here if you have TWL4030 / TWL6030 family chip on your board.
	  This core driver provides register access and IRQ handling
	  facilities, and registers devices for the various functions
	  so that function-specific drivers can bind to them.

	  These multi-function chips are found on many OMAP2 and OMAP3
	  boards, providing power management, RTC, GPIO, keypad, a
	  high speed USB OTG transceiver, an audio codec (on most
	  versions) and many other features.

config TWL4030_POWER
	bool "Support power resources on TWL4030 family chips"
	depends on TWL4030_CORE && ARM
	help
	  Say yes here if you want to use the power resources on the
	  TWL4030 family chips.  Most of these resources are regulators,
	  which have a separate driver; some are control signals, such
	  as clock request handshaking.

	  This driver uses board-specific data to initialize the resources
	  and load scripts controling which resources are switched off/on
	  or reset when a sleep, wakeup or warm reset event occurs.

config TWL4030_CODEC
	bool
	depends on TWL4030_CORE
	select MFD_CORE
	default n

config MFD_TMIO
	bool
	default n

config MFD_T7L66XB
	bool "Support Toshiba T7L66XB"
	depends on ARM && HAVE_CLK
	select MFD_CORE
	select MFD_TMIO
	help
	  Support for Toshiba Mobile IO Controller T7L66XB

config MFD_TC6387XB
	bool "Support Toshiba TC6387XB"
	depends on ARM && HAVE_CLK
	select MFD_CORE
	select MFD_TMIO
	help
	  Support for Toshiba Mobile IO Controller TC6387XB

config MFD_TC6393XB
	bool "Support Toshiba TC6393XB"
	depends on GPIOLIB && ARM
	select MFD_CORE
	select MFD_TMIO
	help
	  Support for Toshiba Mobile IO Controller TC6393XB

config PMIC_DA903X
	bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
	depends on I2C=y
	help
	  Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
	  ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
	  usually found on PXA processors-based platforms. This includes
	  the I2C driver and the core APIs _only_, you have to select
	  individual components like LCD backlight, voltage regulators,
	  LEDs and battery-charger under the corresponding menus.

config PMIC_ADP5520
	bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
	depends on I2C=y
	help
	  Say yes here to add support for Analog Devices AD5520 and ADP5501,
	  Multifunction Power Management IC. This includes
	  the I2C driver and the core APIs _only_, you have to select
	  individual components like LCD backlight, LEDs, GPIOs and Kepad
	  under the corresponding menus.

config MFD_WM8400
	tristate "Support Wolfson Microelectronics WM8400"
	select MFD_CORE
	depends on I2C
	help
	  Support for the Wolfson Microelecronics WM8400 PMIC and audio
	  CODEC.  This driver provides common support for accessing
	  the device, additional drivers must be enabled in order to use
	  the functionality of the device.

config MFD_WM831X
	bool "Support Wolfson Microelectronics WM831x/2x PMICs"
	select MFD_CORE
	depends on I2C=y
	help
	  Support for the Wolfson Microelecronics WM831x and WM832x PMICs.
	  This driver provides common support for accessing the device,
	  additional drivers must be enabled in order to use the
	  functionality of the device.

config MFD_WM8350
	bool

config MFD_WM8350_CONFIG_MODE_0
	bool
	depends on MFD_WM8350

config MFD_WM8350_CONFIG_MODE_1
	bool
	depends on MFD_WM8350

config MFD_WM8350_CONFIG_MODE_2
	bool
	depends on MFD_WM8350

config MFD_WM8350_CONFIG_MODE_3
	bool
	depends on MFD_WM8350

config MFD_WM8351_CONFIG_MODE_0
	bool
	depends on MFD_WM8350

config MFD_WM8351_CONFIG_MODE_1
	bool
	depends on MFD_WM8350

config MFD_WM8351_CONFIG_MODE_2
	bool
	depends on MFD_WM8350

config MFD_WM8351_CONFIG_MODE_3
	bool
	depends on MFD_WM8350

config MFD_WM8352_CONFIG_MODE_0
	bool
	depends on MFD_WM8350

config MFD_WM8352_CONFIG_MODE_1
	bool
	depends on MFD_WM8350

config MFD_WM8352_CONFIG_MODE_2
	bool
	depends on MFD_WM8350

config MFD_WM8352_CONFIG_MODE_3
	bool
	depends on MFD_WM8350

config MFD_WM8350_I2C
	bool "Support Wolfson Microelectronics WM8350 with I2C"
	select MFD_WM8350
	depends on I2C=y
	help
	  The WM8350 is an integrated audio and power management
	  subsystem with watchdog and RTC functionality for embedded
	  systems.  This option enables core support for the WM8350 with
	  I2C as the control interface.  Additional options must be
	  selected to enable support for the functionality of the chip.

config MFD_PCF50633
	tristate "Support for NXP PCF50633"
	depends on I2C
	help
	  Say yes here if you have NXP PCF50633 chip on your board.
	  This core driver provides register access and IRQ handling
	  facilities, and registers devices for the various functions
	  so that function-specific drivers can bind to them.

config MFD_MC13783
	tristate "Support Freescale MC13783"
	depends on SPI_MASTER
	select MFD_CORE
	help
	  Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
	  This driver provides common support for accessing  the device,
	  additional drivers must be enabled in order to use the
	  functionality of the device.

config PCF50633_ADC
	tristate "Support for NXP PCF50633 ADC"
	depends on MFD_PCF50633
	help
	 Say yes here if you want to include support for ADC in the
	 NXP PCF50633 chip.

config PCF50633_GPIO
	tristate "Support for NXP PCF50633 GPIO"
	depends on MFD_PCF50633
	help
	 Say yes here if you want to include support GPIO for pins on
	 the PCF50633 chip.

config AB3100_CORE
	tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
	depends on I2C
	default y if ARCH_U300
	help
	  Select this to enable the AB3100 Mixed Signal IC core
	  functionality. This connects to a AB3100 on the I2C bus
	  and expose a number of symbols needed for dependent devices
	  to read and write registers and subscribe to events from
	  this multi-functional IC. This is needed to use other features
	  of the AB3100 such as battery-backed RTC, charging control,
	  LEDs, vibrator, system power and temperature, power management
	  and ALSA sound.

config AB3100_OTP
	tristate "ST-Ericsson AB3100 OTP functions"
	depends on AB3100_CORE
	default y if AB3100_CORE
	help
	  Select this to enable the AB3100 Mixed Signal IC OTP (one-time
	  programmable memory) support. This exposes a sysfs file to read
	  out OTP values.

config EZX_PCAP
	bool "PCAP Support"
	depends on GENERIC_HARDIRQS && SPI_MASTER
	help
	  This enables the PCAP ASIC present on EZX Phones. This is
	  needed for MMC, TouchScreen, Sound, USB, etc..

config MFD_88PM8607
	bool "Support Marvell 88PM8607"
	depends on I2C=y
	select MFD_CORE
	help
	  This supports for Marvell 88PM8607 Power Management IC. This includes
	  the I2C driver and the core APIs _only_, you have to select
	  individual components like voltage regulators, RTC and
	  battery-charger under the corresponding menus.

config AB4500_CORE
	tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip"
	depends on SPI
	help
	  Select this option to enable access to AB4500 power management
	  chip. This connects to U8500 on the SSP/SPI bus and exports
	  read/write functions for the devices to get access to this chip.
	  This chip embeds various other multimedia funtionalities as well.

config MFD_TIMBERDALE
	tristate "Support for the Timberdale FPGA"
	select MFD_CORE
	depends on PCI && GPIOLIB
	---help---
	This is the core driver for the timberdale FPGA. This device is a
	multifunction device which exposes numerous platform devices.

	The timberdale FPGA can be found on the Intel Atom development board
	for in-vehicle infontainment, called Russellville.
endmenu

menu "Multimedia Capabilities Port drivers"
	depends on ARCH_SA1100

config MCP
	tristate

# Interface drivers
config MCP_SA11X0
	tristate "Support SA11x0 MCP interface"
	depends on ARCH_SA1100
	select MCP

# Chip drivers
config MCP_UCB1200
	tristate "Support for UCB1200 / UCB1300"
	depends on MCP

config MCP_UCB1200_TS
	tristate "Touchscreen interface support"
	depends on MCP_UCB1200 && INPUT

endmenu
Commit	Line	Data
a4e137ab RK	1	#
	2	# Multifunction miscellaneous devices
	3	#
	4
b6d6454f	5	menu "Multifunction device drivers"
e25df120	6	depends on HAS_IOMEM
b6d6454f	7
aa613de6 DES	8	config MFD_CORE
	9	tristate
	10	default n
	11
b6d6454f BD	12	config MFD_SM501
	13	tristate "Support for Silicon Motion SM501"
	14	---help---
	15	This is the core driver for the Silicon Motion SM501 multimedia
	16	companion chip. This device is a multifunction device which may
01dd2fbf ML	17	provide numerous interfaces including USB host controller, USB gadget,
01dd2fbf ML	18	asynchronous serial ports, audio functions, and a dual display video
b6d6454f BD	19	interface. The device may be connected by PCI or local bus with
	20	varying functions enabled.
	21
f61be273 BD	22	config MFD_SM501_GPIO
f61be273 BD	23	bool "Export GPIO via GPIO layer"
2eedd604	24	depends on MFD_SM501 && GPIOLIB
f61be273 BD	25	---help---
	26	This option uses the gpio library layer to export the 64 GPIO
	27	lines on the SM501. The platform data is used to supply the
	28	base number for the first GPIO line to register.
	29
fa9ff4b1 SO	30	config MFD_ASIC3
fa9ff4b1 SO	31	bool "Support for Compaq ASIC3"
2eedd604	32	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
9461f65a	33	select MFD_CORE
fa9ff4b1 SO	34	---help---
	35	This driver supports the ASIC3 multifunction chip found on many
	36	PDAs (mainly iPAQ and HTC based ones)
	37
a87d5638 MD	38	config MFD_SH_MOBILE_SDHI
	39	bool "Support for SuperH Mobile SDHI"
	40	depends on SUPERH
	41	select MFD_CORE
	42	---help---
	43	This driver supports the SDHI hardware block found in many
	44	SuperH Mobile SoCs.
	45
0931a4c6 DB	46	config MFD_DM355EVM_MSP
	47	bool "DaVinci DM355 EVM microcontroller"
	48	depends on I2C && MACH_DAVINCI_DM355_EVM
	49	help
	50	This driver supports the MSP430 microcontroller used on these
	51	boards. MSP430 firmware manages resets and power sequencing,
	52	inputs from buttons and the IR remote, LEDs, an RTC, and more.
	53
a1635b8f PZ	54	config HTC_EGPIO
a1635b8f PZ	55	bool "HTC EGPIO support"
7444a72e	56	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
a1635b8f PZ	57	help
	58	This driver supports the CPLD egpio chip present on
	59	several HTC phones. It provides basic support for input
	60	pins, output pins, and irqs.
	61
5dc3339a PZ	62	config HTC_PASIC3
5dc3339a PZ	63	tristate "HTC PASIC3 LED/DS1WM chip support"
0254a8f4	64	select MFD_CORE
5dc3339a PZ	65	help
	66	This core driver provides register access for the LED/DS1WM
	67	chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
	68	HTC Magician devices, respectively. Actual functionality is
	69	handled by the leds-pasic3 and ds1wm drivers.
	70
d9105c2b MV	71	config UCB1400_CORE
d9105c2b MV	72	tristate "Philips UCB1400 Core driver"
e4831802	73	depends on AC97_BUS
5a49a540	74	depends on GPIOLIB
d9105c2b MV	75	help
	76	This enables support for the Philips UCB1400 core functions.
	77	The UCB1400 is an AC97 audio codec.
	78
	79	To compile this driver as a module, choose M here: the
	80	module will be called ucb1400_core.
	81
87c13493 DB	82	config TPS65010
	83	tristate "TPS6501x Power Management chips"
	84	depends on I2C && GPIOLIB
	85	default y if MACH_OMAP_H2 \|\| MACH_OMAP_H3 \|\| MACH_OMAP_OSK
	86	help
	87	If you say yes here you get support for the TPS6501x series of
	88	Power Management chips. These include voltage regulators,
	89	lithium ion/polymer battery charging, and other features that
	90	are often used in portable devices like cell phones and cameras.
	91
	92	This driver can also be built as a module. If so, the module
	93	will be called tps65010.
	94
88e75cc3 DB	95	config MENELAUS
88e75cc3 DB	96	bool "Texas Instruments TWL92330/Menelaus PM chip"
088ef950	97	depends on I2C=y && ARCH_OMAP2
88e75cc3 DB	98	help
	99	If you say yes here you get support for the Texas Instruments
	100	TWL92330/Menelaus Power Management chip. This include voltage
692105b8	101	regulators, Dual slot memory card transceivers, real-time clock
88e75cc3 DB	102	and other features that are often used in portable devices like
	103	cell phones and PDAs.
	104
a603a7fa	105	config TWL4030_CORE
e8deb28c	106	bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
67460a7c	107	depends on I2C=y && GENERIC_HARDIRQS
a603a7fa	108	help
e8deb28c	109	Say yes here if you have TWL4030 / TWL6030 family chip on your board.
a603a7fa DB	110	This core driver provides register access and IRQ handling
	111	facilities, and registers devices for the various functions
	112	so that function-specific drivers can bind to them.
	113
	114	These multi-function chips are found on many OMAP2 and OMAP3
	115	boards, providing power management, RTC, GPIO, keypad, a
	116	high speed USB OTG transceiver, an audio codec (on most
	117	versions) and many other features.
	118
ebf0bd36 AK	119	config TWL4030_POWER
	120	bool "Support power resources on TWL4030 family chips"
	121	depends on TWL4030_CORE && ARM
	122	help
	123	Say yes here if you want to use the power resources on the
	124	TWL4030 family chips. Most of these resources are regulators,
	125	which have a separate driver; some are control signals, such
	126	as clock request handshaking.
	127
	128	This driver uses board-specific data to initialize the resources
	129	and load scripts controling which resources are switched off/on
	130	or reset when a sleep, wakeup or warm reset event occurs.
	131
0b83ddeb PU	132	config TWL4030_CODEC
	133	bool
	134	depends on TWL4030_CORE
	135	select MFD_CORE
	136	default n
	137
1c2c30ac SO	138	config MFD_TMIO
	139	bool
	140	default n
	141
1f192015 IM	142	config MFD_T7L66XB
1f192015 IM	143	bool "Support Toshiba T7L66XB"
9ca68233	144	depends on ARM && HAVE_CLK
1f192015	145	select MFD_CORE
1c2c30ac	146	select MFD_TMIO
1f192015 IM	147	help
	148	Support for Toshiba Mobile IO Controller T7L66XB
	149
cbdfb426 IM	150	config MFD_TC6387XB
cbdfb426 IM	151	bool "Support Toshiba TC6387XB"
9ca68233	152	depends on ARM && HAVE_CLK
cbdfb426	153	select MFD_CORE
1c2c30ac	154	select MFD_TMIO
cbdfb426 IM	155	help
	156	Support for Toshiba Mobile IO Controller TC6387XB
	157
d6315949 DES	158	config MFD_TC6393XB
d6315949 DES	159	bool "Support Toshiba TC6393XB"
8d25b36b	160	depends on GPIOLIB && ARM
f024ff10	161	select MFD_CORE
1c2c30ac	162	select MFD_TMIO
d6315949 DES	163	help
	164	Support for Toshiba Mobile IO Controller TC6393XB
	165
8e2eaabf SO	166	config PMIC_DA903X
	167	bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
	168	depends on I2C=y
	169	help
	170	Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
	171	ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
	172	usually found on PXA processors-based platforms. This includes
	173	the I2C driver and the core APIs _only_, you have to select
	174	individual components like LCD backlight, voltage regulators,
	175	LEDs and battery-charger under the corresponding menus.
a5736e0b MH	176
	177	config PMIC_ADP5520
	178	bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
	179	depends on I2C=y
	180	help
	181	Say yes here to add support for Analog Devices AD5520 and ADP5501,
	182	Multifunction Power Management IC. This includes
	183	the I2C driver and the core APIs _only_, you have to select
	184	individual components like LCD backlight, LEDs, GPIOs and Kepad
	185	under the corresponding menus.
8e2eaabf	186
1d9f9f04 MB	187	config MFD_WM8400
1d9f9f04 MB	188	tristate "Support Wolfson Microelectronics WM8400"
b8380c1a	189	select MFD_CORE
9c366452	190	depends on I2C
1d9f9f04 MB	191	help
1d9f9f04 MB	192	Support for the Wolfson Microelecronics WM8400 PMIC and audio
9e5aca58	193	CODEC. This driver provides common support for accessing
1d9f9f04 MB	194	the device, additional drivers must be enabled in order to use
	195	the functionality of the device.
	196
b11062b9	197	config MFD_WM831X
6e40173d	198	bool "Support Wolfson Microelectronics WM831x/2x PMICs"
b11062b9	199	select MFD_CORE
01253503	200	depends on I2C=y
b11062b9	201	help
d4e0a89e MB	202	Support for the Wolfson Microelecronics WM831x and WM832x PMICs.
d4e0a89e MB	203	This driver provides common support for accessing the device,
b11062b9 MB	204	additional drivers must be enabled in order to use the
	205	functionality of the device.
	206
89b4012b	207	config MFD_WM8350
ecf926bc	208	bool
89b4012b MB	209
	210	config MFD_WM8350_CONFIG_MODE_0
	211	bool
	212	depends on MFD_WM8350
	213
	214	config MFD_WM8350_CONFIG_MODE_1
	215	bool
	216	depends on MFD_WM8350
	217
	218	config MFD_WM8350_CONFIG_MODE_2
	219	bool
	220	depends on MFD_WM8350
	221
	222	config MFD_WM8350_CONFIG_MODE_3
	223	bool
	224	depends on MFD_WM8350
	225
ca23f8c1 MB	226	config MFD_WM8351_CONFIG_MODE_0
	227	bool
	228	depends on MFD_WM8350
	229
	230	config MFD_WM8351_CONFIG_MODE_1
	231	bool
	232	depends on MFD_WM8350
	233
	234	config MFD_WM8351_CONFIG_MODE_2
	235	bool
	236	depends on MFD_WM8350
	237
	238	config MFD_WM8351_CONFIG_MODE_3
	239	bool
	240	depends on MFD_WM8350
	241
96920630 MB	242	config MFD_WM8352_CONFIG_MODE_0
	243	bool
	244	depends on MFD_WM8350
	245
	246	config MFD_WM8352_CONFIG_MODE_1
	247	bool
	248	depends on MFD_WM8350
	249
	250	config MFD_WM8352_CONFIG_MODE_2
	251	bool
	252	depends on MFD_WM8350
	253
	254	config MFD_WM8352_CONFIG_MODE_3
	255	bool
	256	depends on MFD_WM8350
	257
c661a0b9	258	config MFD_WM8350_I2C
ecf926bc	259	bool "Support Wolfson Microelectronics WM8350 with I2C"
c661a0b9	260	select MFD_WM8350
ecf926bc	261	depends on I2C=y
c661a0b9 MB	262	help
	263	The WM8350 is an integrated audio and power management
	264	subsystem with watchdog and RTC functionality for embedded
	265	systems. This option enables core support for the WM8350 with
	266	I2C as the control interface. Additional options must be
	267	selected to enable support for the functionality of the chip.
	268
f52046b1 BR	269	config MFD_PCF50633
	270	tristate "Support for NXP PCF50633"
	271	depends on I2C
	272	help
	273	Say yes here if you have NXP PCF50633 chip on your board.
	274	This core driver provides register access and IRQ handling
	275	facilities, and registers devices for the various functions
	276	so that function-specific drivers can bind to them.
	277
8238addc SH	278	config MFD_MC13783
	279	tristate "Support Freescale MC13783"
	280	depends on SPI_MASTER
	281	select MFD_CORE
	282	help
	283	Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
	284	This driver provides common support for accessing the device,
	285	additional drivers must be enabled in order to use the
	286	functionality of the device.
	287
08c3e06a BR	288	config PCF50633_ADC
	289	tristate "Support for NXP PCF50633 ADC"
	290	depends on MFD_PCF50633
	291	help
	292	Say yes here if you want to include support for ADC in the
	293	NXP PCF50633 chip.
	294
6a3d119b BR	295	config PCF50633_GPIO
	296	tristate "Support for NXP PCF50633 GPIO"
	297	depends on MFD_PCF50633
	298	help
	299	Say yes here if you want to include support GPIO for pins on
	300	the PCF50633 chip.
	301
14fa5691 LW	302	config AB3100_CORE
	303	tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
	304	depends on I2C
	305	default y if ARCH_U300
	306	help
	307	Select this to enable the AB3100 Mixed Signal IC core
	308	functionality. This connects to a AB3100 on the I2C bus
	309	and expose a number of symbols needed for dependent devices
	310	to read and write registers and subscribe to events from
	311	this multi-functional IC. This is needed to use other features
	312	of the AB3100 such as battery-backed RTC, charging control,
	313	LEDs, vibrator, system power and temperature, power management
	314	and ALSA sound.
	315
12992dd8 LW	316	config AB3100_OTP
	317	tristate "ST-Ericsson AB3100 OTP functions"
	318	depends on AB3100_CORE
	319	default y if AB3100_CORE
	320	help
	321	Select this to enable the AB3100 Mixed Signal IC OTP (one-time
	322	programmable memory) support. This exposes a sysfs file to read
	323	out OTP values.
	324
13a09f93 DR	325	config EZX_PCAP
	326	bool "PCAP Support"
	327	depends on GENERIC_HARDIRQS && SPI_MASTER
	328	help
	329	This enables the PCAP ASIC present on EZX Phones. This is
	330	needed for MMC, TouchScreen, Sound, USB, etc..
	331
4107da2a HZ	332	config MFD_88PM8607
4107da2a HZ	333	bool "Support Marvell 88PM8607"
15e0ff7a	334	depends on I2C=y
4107da2a HZ	335	select MFD_CORE
	336	help
	337	This supports for Marvell 88PM8607 Power Management IC. This includes
	338	the I2C driver and the core APIs _only_, you have to select
	339	individual components like voltage regulators, RTC and
	340	battery-charger under the corresponding menus.
	341
0c41839e SK	342	config AB4500_CORE
	343	tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip"
	344	depends on SPI
0c41839e SK	345	help
	346	Select this option to enable access to AB4500 power management
	347	chip. This connects to U8500 on the SSP/SPI bus and exports
	348	read/write functions for the devices to get access to this chip.
	349	This chip embeds various other multimedia funtionalities as well.
	350
8edbede9 RR	351	config MFD_TIMBERDALE
	352	tristate "Support for the Timberdale FPGA"
	353	select MFD_CORE
546e29b6	354	depends on PCI && GPIOLIB
8edbede9 RR	355	---help---
	356	This is the core driver for the timberdale FPGA. This device is a
	357	multifunction device which exposes numerous platform devices.
	358
	359	The timberdale FPGA can be found on the Intel Atom development board
	360	for in-vehicle infontainment, called Russellville.
b6d6454f BD	361	endmenu
b6d6454f BD	362
a4e137ab	363	menu "Multimedia Capabilities Port drivers"
f751d50f	364	depends on ARCH_SA1100
a4e137ab RK	365
	366	config MCP
	367	tristate
	368
5e742ad6 RK	369	# Interface drivers
	370	config MCP_SA11X0
	371	tristate "Support SA11x0 MCP interface"
	372	depends on ARCH_SA1100
	373	select MCP
	374
05c45ca9 RK	375	# Chip drivers
	376	config MCP_UCB1200
	377	tristate "Support for UCB1200 / UCB1300"
	378	depends on MCP
	379
acb45439 RK	380	config MCP_UCB1200_TS
	381	tristate "Touchscreen interface support"
	382	depends on MCP_UCB1200 && INPUT
	383
a4e137ab	384	endmenu