[net-next-2.6.git] / drivers / input / touchscreen / Kconfig

#
# Touchscreen driver configuration
#
menuconfig INPUT_TOUCHSCREEN
	bool "Touchscreens"
	help
	  Say Y here, and a list of supported touchscreens will be displayed.
	  This option doesn't affect the kernel.

	  If unsure, say Y.

if INPUT_TOUCHSCREEN

config TOUCHSCREEN_ADS7846
	tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
	depends on SPI_MASTER
	depends on HWMON = n || HWMON
	help
	  Say Y here if you have a touchscreen interface using the
	  ADS7846/TSC2046 or ADS7843 controller, and your board-specific
	  setup code includes that in its table of SPI devices.

	  If HWMON is selected, and the driver is told the reference voltage
	  on your board, you will also get hwmon interfaces for the voltage
	  (and on ads7846/tsc2046, temperature) sensors of this chip.

	  If unsure, say N (but it's safe to say "Y").

	  To compile this driver as a module, choose M here: the
	  module will be called ads7846.

config TOUCHSCREEN_AD7877
	tristate "AD7877 based touchscreens"
	depends on SPI_MASTER
	help
	  Say Y here if you have a touchscreen interface using the
	  AD7877 controller, and your board-specific initialization
	  code includes that in its table of SPI devices.

	  If unsure, say N (but it's safe to say "Y").

	  To compile this driver as a module, choose M here: the
	  module will be called ad7877.

config TOUCHSCREEN_AD7879_I2C
	tristate "AD7879 based touchscreens: AD7879-1 I2C Interface"
	depends on I2C
	select TOUCHSCREEN_AD7879
	help
	  Say Y here if you have a touchscreen interface using the
	  AD7879-1 controller, and your board-specific initialization
	  code includes that in its table of I2C devices.

	  If unsure, say N (but it's safe to say "Y").

	  To compile this driver as a module, choose M here: the
	  module will be called ad7879.

config TOUCHSCREEN_AD7879_SPI
	tristate "AD7879 based touchscreens: AD7879 SPI Interface"
	depends on SPI_MASTER && TOUCHSCREEN_AD7879_I2C = n
	select TOUCHSCREEN_AD7879
	help
	  Say Y here if you have a touchscreen interface using the
	  AD7879 controller, and your board-specific initialization
	  code includes that in its table of SPI devices.

	  If unsure, say N (but it's safe to say "Y").

	  To compile this driver as a module, choose M here: the
	  module will be called ad7879.

config TOUCHSCREEN_AD7879
	tristate
	default n

config TOUCHSCREEN_BITSY
	tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
	depends on SA1100_BITSY
	select SERIO
	help
	  Say Y here if you have the h3600 (Bitsy) touchscreen.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called h3600_ts_input.

config TOUCHSCREEN_CORGI
	tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)"
	depends on PXA_SHARPSL
	select CORGI_SSP_DEPRECATED
	default y
	help
	  Say Y here to enable the driver for the touchscreen on the
	  Sharp SL-C7xx and SL-Cxx00 series of PDAs.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called corgi_ts.

	  NOTE: this driver is deprecated, try enable SPI and generic
	  ADS7846-based touchscreen driver.

config TOUCHSCREEN_DA9034
	tristate "Touchscreen support for Dialog Semiconductor DA9034"
	depends on PMIC_DA903X
	default y
	help
	  Say Y here to enable the support for the touchscreen found
	  on Dialog Semiconductor DA9034 PMIC.

config TOUCHSCREEN_EETI
	tristate "EETI touchscreen panel support"
	depends on I2C
	help
	  Say Y here to enable support for I2C connected EETI touch panels.

	  To compile this driver as a module, choose M here: the
	  module will be called eeti_ts.

config TOUCHSCREEN_FUJITSU
	tristate "Fujitsu serial touchscreen"
	select SERIO
	help
	  Say Y here if you have the Fujitsu touchscreen (such as one
	  installed in Lifebook P series laptop) connected to your
	  system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called fujitsu-ts.

config TOUCHSCREEN_GUNZE
	tristate "Gunze AHL-51S touchscreen"
	select SERIO
	help
	  Say Y here if you have the Gunze AHL-51 touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called gunze.

config TOUCHSCREEN_ELO
	tristate "Elo serial touchscreens"
	select SERIO
	help
	  Say Y here if you have an Elo serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called elo.

config TOUCHSCREEN_WACOM_W8001
	tristate "Wacom W8001 penabled serial touchscreen"
	select SERIO
	help
	  Say Y here if you have an Wacom W8001 penabled serial touchscreen
	  connected to your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called wacom_w8001.


config TOUCHSCREEN_MTOUCH
	tristate "MicroTouch serial touchscreens"
	select SERIO
	help
	  Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called mtouch.

config TOUCHSCREEN_INEXIO
	tristate "iNexio serial touchscreens"
	select SERIO
	help
	  Say Y here if you have an iNexio serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called inexio.

config TOUCHSCREEN_MK712
	tristate "ICS MicroClock MK712 touchscreen"
	help
	  Say Y here if you have the ICS MicroClock MK712 touchscreen
	  controller chip in your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called mk712.

config TOUCHSCREEN_HP600
	tristate "HP Jornada 6xx touchscreen"
	depends on SH_HP6XX && SH_ADC
	help
	  Say Y here if you have a HP Jornada 620/660/680/690 and want to
          support the built-in touchscreen.

	  To compile this driver as a module, choose M here: the
	  module will be called hp680_ts_input.

config TOUCHSCREEN_HP7XX
	tristate "HP Jornada 7xx touchscreen"
	depends on SA1100_JORNADA720_SSP
	help
	  Say Y here if you have a HP Jornada 710/720/728 and want
	  to support the built-in touchscreen.

	  To compile this driver as a module, choose M here: the
	  module will be called jornada720_ts.

config TOUCHSCREEN_HTCPEN
	tristate "HTC Shift X9500 touchscreen"
	depends on ISA
	help
	  Say Y here if you have an HTC Shift UMPC also known as HTC X9500
	  Clio / Shangrila and want to support the built-in touchscreen.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called htcpen.

config TOUCHSCREEN_PENMOUNT
	tristate "Penmount serial touchscreen"
	select SERIO
	help
	  Say Y here if you have a Penmount serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called penmount.

config TOUCHSCREEN_MIGOR
	tristate "Renesas MIGO-R touchscreen"
	depends on SH_MIGOR && I2C
	help
	  Say Y here to enable MIGO-R touchscreen support.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called migor_ts.

config TOUCHSCREEN_TOUCHRIGHT
	tristate "Touchright serial touchscreen"
	select SERIO
	help
	  Say Y here if you have a Touchright serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called touchright.

config TOUCHSCREEN_TOUCHWIN
	tristate "Touchwin serial touchscreen"
	select SERIO
	help
	  Say Y here if you have a Touchwin serial touchscreen connected to
	  your system.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called touchwin.

config TOUCHSCREEN_ATMEL_TSADCC
	tristate "Atmel Touchscreen Interface"
	depends on ARCH_AT91SAM9RL
	help
	  Say Y here if you have a 4-wire touchscreen connected to the
          ADC Controller on your Atmel SoC (such as the AT91SAM9RL).

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called atmel_tsadcc.

config TOUCHSCREEN_UCB1400
	tristate "Philips UCB1400 touchscreen"
	depends on AC97_BUS
	depends on UCB1400_CORE
	help
	  This enables support for the Philips UCB1400 touchscreen interface.
	  The UCB1400 is an AC97 audio codec.  The touchscreen interface
	  will be initialized only after the ALSA subsystem has been
	  brought up and the UCB1400 detected.  You therefore have to
	  configure ALSA support as well (either built-in or modular,
	  independently of whether this driver is itself built-in or
	  modular) for this driver to work.

	  To compile this driver as a module, choose M here: the
	  module will be called ucb1400_ts.

config TOUCHSCREEN_WM97XX
	tristate "Support for WM97xx AC97 touchscreen controllers"
	depends on AC97_BUS
	help
	  Say Y here if you have a Wolfson Microelectronics WM97xx
	  touchscreen connected to your system. Note that this option
	  only enables core driver, you will also need to select
	  support for appropriate chip below.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called wm97xx-ts.

config TOUCHSCREEN_WM9705
	bool "WM9705 Touchscreen interface support"
	depends on TOUCHSCREEN_WM97XX
	default y
	help
	  Say Y here to enable support for the Wolfson Microelectronics
	  WM9705 touchscreen controller.

config TOUCHSCREEN_WM9712
	bool "WM9712 Touchscreen interface support"
	depends on TOUCHSCREEN_WM97XX
	default y
	help
	  Say Y here to enable support for the Wolfson Microelectronics
	  WM9712 touchscreen controller.

config TOUCHSCREEN_WM9713
	bool "WM9713 Touchscreen interface support"
	depends on TOUCHSCREEN_WM97XX
	default y
	help
	  Say Y here to enable support for the Wolfson Microelectronics
	  WM9713 touchscreen controller.

config TOUCHSCREEN_WM97XX_ATMEL
	tristate "WM97xx Atmel accelerated touch"
	depends on TOUCHSCREEN_WM97XX && (AVR32 || ARCH_AT91)
	help
	  Say Y here for support for streaming mode with WM97xx touchscreens
	  on Atmel AT91 or AVR32 systems with an AC97C module.

	  Be aware that this will use channel B in the controller for
	  streaming data, this must not conflict with other AC97C drivers.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the module will
	  be called atmel-wm97xx.

config TOUCHSCREEN_WM97XX_MAINSTONE
	tristate "WM97xx Mainstone accelerated touch"
	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
	help
	  Say Y here for support for streaming mode with WM97xx touchscreens
	  on Mainstone systems.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called mainstone-wm97xx.

config TOUCHSCREEN_WM97XX_ZYLONITE
	tristate "Zylonite accelerated touch"
	depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
	select TOUCHSCREEN_WM9713
	help
	  Say Y here for support for streaming mode with the touchscreen
	  on Zylonite systems.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called zylonite-wm97xx.

config TOUCHSCREEN_USB_COMPOSITE
	tristate "USB Touchscreen Driver"
	depends on USB_ARCH_HAS_HCD
	select USB
	help
	  USB Touchscreen driver for:
	  - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
	  - PanJit TouchSet USB
	  - 3M MicroTouch USB (EX II series)
	  - ITM
	  - some other eTurboTouch
	  - Gunze AHL61
	  - DMC TSC-10/25
	  - IRTOUCHSYSTEMS/UNITOP
	  - IdealTEK URTC1000
	  - GoTop Super_Q2/GogoPen/PenPower tablets
	  - JASTEC USB Touch Controller/DigiTech DTR-02U

	  Have a look at <http://linux.chapter7.ch/touchkit/> for
	  a usage description and the required user-space stuff.

	  To compile this driver as a module, choose M here: the
	  module will be called usbtouchscreen.

config TOUCHSCREEN_USB_EGALAX
	default y
	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_PANJIT
	default y
	bool "PanJit device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_3M
	default y
	bool "3M/Microtouch EX II series device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_ITM
	default y
	bool "ITM device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_ETURBO
	default y
	bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_GUNZE
	default y
	bool "Gunze AHL61 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_DMC_TSC10
	default y
	bool "DMC TSC-10/25 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_IRTOUCH
	default y
	bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_IDEALTEK
	default y
	bool "IdealTEK URTC1000 device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_GENERAL_TOUCH
	default y
	bool "GeneralTouch Touchscreen device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_GOTOP
	default y
	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_USB_JASTEC
	default y
	bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EMBEDDED
	depends on TOUCHSCREEN_USB_COMPOSITE

config TOUCHSCREEN_TOUCHIT213
	tristate "Sahara TouchIT-213 touchscreen"
	select SERIO
	help
	  Say Y here if you have a Sahara TouchIT-213 Tablet PC.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called touchit213.

config TOUCHSCREEN_TSC2007
	tristate "TSC2007 based touchscreens"
	depends on I2C
	help
	  Say Y here if you have a TSC2007 based touchscreen.

	  If unsure, say N.

	  To compile this driver as a module, choose M here: the
	  module will be called tsc2007.

config TOUCHSCREEN_W90X900
	tristate "W90P910 touchscreen driver"
	depends on HAVE_CLK
	help
	  Say Y here if you have a W90P910 based touchscreen.

	  To compile this driver as a module, choose M here: the
	  module will be called w90p910_ts.

endif
Commit	Line	Data
1da177e4	1	#
d05e84e6	2	# Touchscreen driver configuration
1da177e4 LT	3	#
	4	menuconfig INPUT_TOUCHSCREEN
	5	bool "Touchscreens"
	6	help
	7	Say Y here, and a list of supported touchscreens will be displayed.
	8	This option doesn't affect the kernel.
	9
	10	If unsure, say Y.
	11
	12	if INPUT_TOUCHSCREEN
	13
ffa458c1	14	config TOUCHSCREEN_ADS7846
bff0de5f	15	tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
ffa458c1	16	depends on SPI_MASTER
2c8dc071	17	depends on HWMON = n \|\| HWMON
ffa458c1 DB	18	help
ffa458c1 DB	19	Say Y here if you have a touchscreen interface using the
bff0de5f DB	20	ADS7846/TSC2046 or ADS7843 controller, and your board-specific
bff0de5f DB	21	setup code includes that in its table of SPI devices.
ffa458c1	22
2c8dc071 DB	23	If HWMON is selected, and the driver is told the reference voltage
2c8dc071 DB	24	on your board, you will also get hwmon interfaces for the voltage
bff0de5f	25	(and on ads7846/tsc2046, temperature) sensors of this chip.
2c8dc071	26
ffa458c1 DB	27	If unsure, say N (but it's safe to say "Y").
	28
	29	To compile this driver as a module, choose M here: the
	30	module will be called ads7846.
	31
331b78ed MH	32	config TOUCHSCREEN_AD7877
	33	tristate "AD7877 based touchscreens"
	34	depends on SPI_MASTER
	35	help
	36	Say Y here if you have a touchscreen interface using the
	37	AD7877 controller, and your board-specific initialization
	38	code includes that in its table of SPI devices.
	39
	40	If unsure, say N (but it's safe to say "Y").
	41
	42	To compile this driver as a module, choose M here: the
	43	module will be called ad7877.
	44
b4be468c MH	45	config TOUCHSCREEN_AD7879_I2C
	46	tristate "AD7879 based touchscreens: AD7879-1 I2C Interface"
	47	depends on I2C
	48	select TOUCHSCREEN_AD7879
	49	help
	50	Say Y here if you have a touchscreen interface using the
	51	AD7879-1 controller, and your board-specific initialization
	52	code includes that in its table of I2C devices.
	53
	54	If unsure, say N (but it's safe to say "Y").
	55
	56	To compile this driver as a module, choose M here: the
	57	module will be called ad7879.
	58
	59	config TOUCHSCREEN_AD7879_SPI
	60	tristate "AD7879 based touchscreens: AD7879 SPI Interface"
	61	depends on SPI_MASTER && TOUCHSCREEN_AD7879_I2C = n
	62	select TOUCHSCREEN_AD7879
	63	help
	64	Say Y here if you have a touchscreen interface using the
	65	AD7879 controller, and your board-specific initialization
	66	code includes that in its table of SPI devices.
	67
	68	If unsure, say N (but it's safe to say "Y").
	69
	70	To compile this driver as a module, choose M here: the
	71	module will be called ad7879.
	72
	73	config TOUCHSCREEN_AD7879
	74	tristate
	75	default n
	76
1da177e4 LT	77	config TOUCHSCREEN_BITSY
	78	tristate "Compaq iPAQ H3600 (Bitsy) touchscreen"
	79	depends on SA1100_BITSY
	80	select SERIO
	81	help
	82	Say Y here if you have the h3600 (Bitsy) touchscreen.
	83
	84	If unsure, say N.
	85
	86	To compile this driver as a module, choose M here: the
	87	module will be called h3600_ts_input.
	88
	89	config TOUCHSCREEN_CORGI
45e2a9b4	90	tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)"
1da177e4	91	depends on PXA_SHARPSL
45e2a9b4	92	select CORGI_SSP_DEPRECATED
d05e84e6	93	default y
1da177e4	94	help
d05e84e6	95	Say Y here to enable the driver for the touchscreen on the
513b6e1a	96	Sharp SL-C7xx and SL-Cxx00 series of PDAs.
1da177e4 LT	97
	98	If unsure, say N.
	99
	100	To compile this driver as a module, choose M here: the
513b6e1a	101	module will be called corgi_ts.
1da177e4	102
45e2a9b4 EM	103	NOTE: this driver is deprecated, try enable SPI and generic
	104	ADS7846-based touchscreen driver.
	105
9bcc00b9 EM	106	config TOUCHSCREEN_DA9034
	107	tristate "Touchscreen support for Dialog Semiconductor DA9034"
	108	depends on PMIC_DA903X
	109	default y
	110	help
	111	Say Y here to enable the support for the touchscreen found
	112	on Dialog Semiconductor DA9034 PMIC.
	113
10494dce DM	114	config TOUCHSCREEN_EETI
	115	tristate "EETI touchscreen panel support"
	116	depends on I2C
	117	help
	118	Say Y here to enable support for I2C connected EETI touch panels.
	119
	120	To compile this driver as a module, choose M here: the
	121	module will be called eeti_ts.
	122
85f202d5 DT	123	config TOUCHSCREEN_FUJITSU
	124	tristate "Fujitsu serial touchscreen"
	125	select SERIO
	126	help
	127	Say Y here if you have the Fujitsu touchscreen (such as one
	128	installed in Lifebook P series laptop) connected to your
	129	system.
	130
	131	If unsure, say N.
	132
	133	To compile this driver as a module, choose M here: the
	134	module will be called fujitsu-ts.
	135
1da177e4 LT	136	config TOUCHSCREEN_GUNZE
	137	tristate "Gunze AHL-51S touchscreen"
	138	select SERIO
	139	help
	140	Say Y here if you have the Gunze AHL-51 touchscreen connected to
	141	your system.
	142
	143	If unsure, say N.
	144
	145	To compile this driver as a module, choose M here: the
	146	module will be called gunze.
	147
	148	config TOUCHSCREEN_ELO
	149	tristate "Elo serial touchscreens"
	150	select SERIO
	151	help
	152	Say Y here if you have an Elo serial touchscreen connected to
	153	your system.
	154
	155	If unsure, say N.
	156
	157	To compile this driver as a module, choose M here: the
153ab429	158	module will be called elo.
1da177e4	159
3eb1aa43 JK	160	config TOUCHSCREEN_WACOM_W8001
	161	tristate "Wacom W8001 penabled serial touchscreen"
	162	select SERIO
	163	help
	164	Say Y here if you have an Wacom W8001 penabled serial touchscreen
	165	connected to your system.
	166
	167	If unsure, say N.
	168
	169	To compile this driver as a module, choose M here: the
	170	module will be called wacom_w8001.
	171
	172
1da177e4 LT	173	config TOUCHSCREEN_MTOUCH
	174	tristate "MicroTouch serial touchscreens"
	175	select SERIO
	176	help
	177	Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
	178	your system.
	179
	180	If unsure, say N.
	181
	182	To compile this driver as a module, choose M here: the
	183	module will be called mtouch.
	184
3cadd2d9 RL	185	config TOUCHSCREEN_INEXIO
	186	tristate "iNexio serial touchscreens"
	187	select SERIO
	188	help
	189	Say Y here if you have an iNexio serial touchscreen connected to
	190	your system.
	191
	192	If unsure, say N.
	193
	194	To compile this driver as a module, choose M here: the
	195	module will be called inexio.
	196
1da177e4 LT	197	config TOUCHSCREEN_MK712
	198	tristate "ICS MicroClock MK712 touchscreen"
	199	help
	200	Say Y here if you have the ICS MicroClock MK712 touchscreen
	201	controller chip in your system.
	202
	203	If unsure, say N.
	204
	205	To compile this driver as a module, choose M here: the
	206	module will be called mk712.
	207
	208	config TOUCHSCREEN_HP600
4ff891eb	209	tristate "HP Jornada 6xx touchscreen"
0025835c	210	depends on SH_HP6XX && SH_ADC
1da177e4	211	help
4ff891eb	212	Say Y here if you have a HP Jornada 620/660/680/690 and want to
1da177e4 LT	213	support the built-in touchscreen.
1da177e4 LT	214
1da177e4 LT	215	To compile this driver as a module, choose M here: the
	216	module will be called hp680_ts_input.
	217
5637f02a	218	config TOUCHSCREEN_HP7XX
4ff891eb	219	tristate "HP Jornada 7xx touchscreen"
5637f02a KE	220	depends on SA1100_JORNADA720_SSP
	221	help
	222	Say Y here if you have a HP Jornada 710/720/728 and want
	223	to support the built-in touchscreen.
	224
	225	To compile this driver as a module, choose M here: the
	226	module will be called jornada720_ts.
	227
5a18c343 POF	228	config TOUCHSCREEN_HTCPEN
	229	tristate "HTC Shift X9500 touchscreen"
	230	depends on ISA
	231	help
	232	Say Y here if you have an HTC Shift UMPC also known as HTC X9500
	233	Clio / Shangrila and want to support the built-in touchscreen.
	234
	235	If unsure, say N.
	236
	237	To compile this driver as a module, choose M here: the
	238	module will be called htcpen.
	239
ee479999 RK	240	config TOUCHSCREEN_PENMOUNT
	241	tristate "Penmount serial touchscreen"
	242	select SERIO
	243	help
	244	Say Y here if you have a Penmount serial touchscreen connected to
	245	your system.
	246
	247	If unsure, say N.
	248
	249	To compile this driver as a module, choose M here: the
	250	module will be called penmount.
	251
885c316d MD	252	config TOUCHSCREEN_MIGOR
	253	tristate "Renesas MIGO-R touchscreen"
	254	depends on SH_MIGOR && I2C
	255	help
	256	Say Y here to enable MIGO-R touchscreen support.
	257
	258	If unsure, say N.
	259
	260	To compile this driver as a module, choose M here: the
	261	module will be called migor_ts.
	262
4003dff4 RK	263	config TOUCHSCREEN_TOUCHRIGHT
	264	tristate "Touchright serial touchscreen"
	265	select SERIO
	266	help
	267	Say Y here if you have a Touchright serial touchscreen connected to
	268	your system.
	269
	270	If unsure, say N.
	271
	272	To compile this driver as a module, choose M here: the
	273	module will be called touchright.
	274
11ea3173 RK	275	config TOUCHSCREEN_TOUCHWIN
	276	tristate "Touchwin serial touchscreen"
	277	select SERIO
	278	help
	279	Say Y here if you have a Touchwin serial touchscreen connected to
	280	your system.
	281
	282	If unsure, say N.
	283
	284	To compile this driver as a module, choose M here: the
	285	module will be called touchwin.
	286
72d18a7b DL	287	config TOUCHSCREEN_ATMEL_TSADCC
	288	tristate "Atmel Touchscreen Interface"
	289	depends on ARCH_AT91SAM9RL
	290	help
	291	Say Y here if you have a 4-wire touchscreen connected to the
	292	ADC Controller on your Atmel SoC (such as the AT91SAM9RL).
	293
	294	If unsure, say N.
	295
	296	To compile this driver as a module, choose M here: the
	297	module will be called atmel_tsadcc.
	298
f40219bf NP	299	config TOUCHSCREEN_UCB1400
f40219bf NP	300	tristate "Philips UCB1400 touchscreen"
64c12e9b	301	depends on AC97_BUS
d9105c2b	302	depends on UCB1400_CORE
f40219bf NP	303	help
	304	This enables support for the Philips UCB1400 touchscreen interface.
	305	The UCB1400 is an AC97 audio codec. The touchscreen interface
	306	will be initialized only after the ALSA subsystem has been
	307	brought up and the UCB1400 detected. You therefore have to
	308	configure ALSA support as well (either built-in or modular,
	309	independently of whether this driver is itself built-in or
	310	modular) for this driver to work.
	311
	312	To compile this driver as a module, choose M here: the
	313	module will be called ucb1400_ts.
	314
febf1dff MB	315	config TOUCHSCREEN_WM97XX
	316	tristate "Support for WM97xx AC97 touchscreen controllers"
	317	depends on AC97_BUS
	318	help
	319	Say Y here if you have a Wolfson Microelectronics WM97xx
	320	touchscreen connected to your system. Note that this option
	321	only enables core driver, you will also need to select
	322	support for appropriate chip below.
	323
	324	If unsure, say N.
	325
	326	To compile this driver as a module, choose M here: the
	327	module will be called wm97xx-ts.
	328
9448cefc MB	329	config TOUCHSCREEN_WM9705
	330	bool "WM9705 Touchscreen interface support"
	331	depends on TOUCHSCREEN_WM97XX
558a171d	332	default y
9448cefc	333	help
558a171d MB	334	Say Y here to enable support for the Wolfson Microelectronics
558a171d MB	335	WM9705 touchscreen controller.
9448cefc	336
de22b9ef MB	337	config TOUCHSCREEN_WM9712
	338	bool "WM9712 Touchscreen interface support"
	339	depends on TOUCHSCREEN_WM97XX
558a171d	340	default y
de22b9ef	341	help
558a171d MB	342	Say Y here to enable support for the Wolfson Microelectronics
558a171d MB	343	WM9712 touchscreen controller.
de22b9ef	344
dca98e91 MB	345	config TOUCHSCREEN_WM9713
	346	bool "WM9713 Touchscreen interface support"
	347	depends on TOUCHSCREEN_WM97XX
558a171d	348	default y
dca98e91	349	help
558a171d MB	350	Say Y here to enable support for the Wolfson Microelectronics
558a171d MB	351	WM9713 touchscreen controller.
dca98e91	352
864fe73c HCE	353	config TOUCHSCREEN_WM97XX_ATMEL
	354	tristate "WM97xx Atmel accelerated touch"
	355	depends on TOUCHSCREEN_WM97XX && (AVR32 \|\| ARCH_AT91)
	356	help
	357	Say Y here for support for streaming mode with WM97xx touchscreens
	358	on Atmel AT91 or AVR32 systems with an AC97C module.
	359
	360	Be aware that this will use channel B in the controller for
	361	streaming data, this must not conflict with other AC97C drivers.
	362
	363	If unsure, say N.
	364
	365	To compile this driver as a module, choose M here: the module will
	366	be called atmel-wm97xx.
	367
4db8a5f2 MB	368	config TOUCHSCREEN_WM97XX_MAINSTONE
	369	tristate "WM97xx Mainstone accelerated touch"
	370	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
	371	help
	372	Say Y here for support for streaming mode with WM97xx touchscreens
	373	on Mainstone systems.
	374
	375	If unsure, say N.
	376
	377	To compile this driver as a module, choose M here: the
	378	module will be called mainstone-wm97xx.
	379
22e39d34 MB	380	config TOUCHSCREEN_WM97XX_ZYLONITE
	381	tristate "Zylonite accelerated touch"
	382	depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
	383	select TOUCHSCREEN_WM9713
	384	help
	385	Say Y here for support for streaming mode with the touchscreen
	386	on Zylonite systems.
	387
	388	If unsure, say N.
	389
	390	To compile this driver as a module, choose M here: the
	391	module will be called zylonite-wm97xx.
	392
d05e84e6 DT	393	config TOUCHSCREEN_USB_COMPOSITE
d05e84e6 DT	394	tristate "USB Touchscreen Driver"
7a86edef	395	depends on USB_ARCH_HAS_HCD
d05e84e6 DT	396	select USB
	397	help
	398	USB Touchscreen driver for:
	399	- eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
	400	- PanJit TouchSet USB
	401	- 3M MicroTouch USB (EX II series)
	402	- ITM
	403	- some other eTurboTouch
	404	- Gunze AHL61
	405	- DMC TSC-10/25
df561fcd	406	- IRTOUCHSYSTEMS/UNITOP
a14a8401	407	- IdealTEK URTC1000
14e40206	408	- GoTop Super_Q2/GogoPen/PenPower tablets
f7370699	409	- JASTEC USB Touch Controller/DigiTech DTR-02U
d05e84e6 DT	410
	411	Have a look at <http://linux.chapter7.ch/touchkit/> for
	412	a usage description and the required user-space stuff.
	413
	414	To compile this driver as a module, choose M here: the
	415	module will be called usbtouchscreen.
	416
	417	config TOUCHSCREEN_USB_EGALAX
	418	default y
	419	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
	420	depends on TOUCHSCREEN_USB_COMPOSITE
	421
	422	config TOUCHSCREEN_USB_PANJIT
	423	default y
	424	bool "PanJit device support" if EMBEDDED
	425	depends on TOUCHSCREEN_USB_COMPOSITE
	426
	427	config TOUCHSCREEN_USB_3M
	428	default y
	429	bool "3M/Microtouch EX II series device support" if EMBEDDED
	430	depends on TOUCHSCREEN_USB_COMPOSITE
	431
	432	config TOUCHSCREEN_USB_ITM
	433	default y
	434	bool "ITM device support" if EMBEDDED
	435	depends on TOUCHSCREEN_USB_COMPOSITE
	436
	437	config TOUCHSCREEN_USB_ETURBO
	438	default y
	439	bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED
	440	depends on TOUCHSCREEN_USB_COMPOSITE
	441
	442	config TOUCHSCREEN_USB_GUNZE
	443	default y
	444	bool "Gunze AHL61 device support" if EMBEDDED
	445	depends on TOUCHSCREEN_USB_COMPOSITE
	446
	447	config TOUCHSCREEN_USB_DMC_TSC10
	448	default y
	449	bool "DMC TSC-10/25 device support" if EMBEDDED
	450	depends on TOUCHSCREEN_USB_COMPOSITE
	451
df561fcd OZ	452	config TOUCHSCREEN_USB_IRTOUCH
	453	default y
	454	bool "IRTOUCHSYSTEMS/UNITOP device support" if EMBEDDED
	455	depends on TOUCHSCREEN_USB_COMPOSITE
	456
a14a8401 OZ	457	config TOUCHSCREEN_USB_IDEALTEK
	458	default y
	459	bool "IdealTEK URTC1000 device support" if EMBEDDED
	460	depends on TOUCHSCREEN_USB_COMPOSITE
	461
9d5657db IF	462	config TOUCHSCREEN_USB_GENERAL_TOUCH
	463	default y
	464	bool "GeneralTouch Touchscreen device support" if EMBEDDED
	465	depends on TOUCHSCREEN_USB_COMPOSITE
	466
14e40206 JJ	467	config TOUCHSCREEN_USB_GOTOP
	468	default y
	469	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EMBEDDED
	470	depends on TOUCHSCREEN_USB_COMPOSITE
	471
f7370699 JP	472	config TOUCHSCREEN_USB_JASTEC
	473	default y
	474	bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EMBEDDED
	475	depends on TOUCHSCREEN_USB_COMPOSITE
	476
73422392 CN	477	config TOUCHSCREEN_TOUCHIT213
	478	tristate "Sahara TouchIT-213 touchscreen"
	479	select SERIO
	480	help
	481	Say Y here if you have a Sahara TouchIT-213 Tablet PC.
	482
	483	If unsure, say N.
	484
	485	To compile this driver as a module, choose M here: the
	486	module will be called touchit213.
	487
50b6f1f4 KL	488	config TOUCHSCREEN_TSC2007
	489	tristate "TSC2007 based touchscreens"
	490	depends on I2C
	491	help
	492	Say Y here if you have a TSC2007 based touchscreen.
	493
	494	If unsure, say N.
	495
	496	To compile this driver as a module, choose M here: the
	497	module will be called tsc2007.
	498
7e3f7375 WZ	499	config TOUCHSCREEN_W90X900
7e3f7375 WZ	500	tristate "W90P910 touchscreen driver"
b7788c5f	501	depends on HAVE_CLK
7e3f7375 WZ	502	help
	503	Say Y here if you have a W90P910 based touchscreen.
	504
	505	To compile this driver as a module, choose M here: the
	506	module will be called w90p910_ts.
	507
1da177e4	508	endif