[net-next-2.6.git] / drivers / input / keyboard / Kconfig

#
# Input core configuration
#
menuconfig INPUT_KEYBOARD
	bool "Keyboards" if EMBEDDED || !X86
	default y
	help
	  Say Y here, and a list of supported keyboards will be displayed.
	  This option doesn't affect the kernel.

	  If unsure, say Y.

if INPUT_KEYBOARD

config KEYBOARD_AAED2000
	tristate "AAED-2000 keyboard"
	depends on MACH_AAED2000
	select INPUT_POLLDEV
	default y
	help
	  Say Y here to enable the keyboard on the Agilent AAED-2000
	  development board.

	  To compile this driver as a module, choose M here: the
	  module will be called aaed2000_kbd.

config KEYBOARD_ADP5520
	tristate "Keypad Support for ADP5520 PMIC"
	depends on PMIC_ADP5520
	help
	  This option enables support for the keypad scan matrix
	  on Analog Devices ADP5520 PMICs.

	  To compile this driver as a module, choose M here: the module will
	  be called adp5520-keys.

config KEYBOARD_ADP5588
	tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander"
	depends on I2C
	help
	  Say Y here if you want to use a ADP5588/87 attached to your
	  system I2C bus.

	  To compile this driver as a module, choose M here: the
	  module will be called adp5588-keys.

config KEYBOARD_AMIGA
	tristate "Amiga keyboard"
	depends on AMIGA
	help
	  Say Y here if you are running Linux on any AMIGA and have a keyboard
	  attached.

	  To compile this driver as a module, choose M here: the
	  module will be called amikbd.

config ATARI_KBD_CORE
	bool

config KEYBOARD_ATARI
	tristate "Atari keyboard"
	depends on ATARI
	select ATARI_KBD_CORE
	help
	  Say Y here if you are running Linux on any Atari and have a keyboard
	  attached.

	  To compile this driver as a module, choose M here: the
	  module will be called atakbd.

config KEYBOARD_ATKBD
	tristate "AT keyboard" if EMBEDDED || !X86 || X86_MRST
	default y
	select SERIO
	select SERIO_LIBPS2
	select SERIO_I8042 if X86 && !X86_MRST
	select SERIO_GSCPS2 if GSC
	help
	  Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
	  you'll need this, unless you have a different type keyboard (USB, ADB
	  or other). This also works for AT and PS/2 keyboards connected over a
	  PS/2 to serial converter.

	  If unsure, say Y.

	  To compile this driver as a module, choose M here: the
	  module will be called atkbd.

config KEYBOARD_ATKBD_HP_KEYCODES
	bool "Use HP keyboard scancodes"
	depends on PARISC && KEYBOARD_ATKBD
	default y
	help
	  Say Y here if you have a PA-RISC machine and want to use an AT or
	  PS/2 keyboard, and your keyboard uses keycodes that are specific to
	  PA-RISC keyboards.

	  Say N if you use a standard keyboard.

config KEYBOARD_ATKBD_RDI_KEYCODES
	bool "Use PrecisionBook keyboard scancodes"
	depends on KEYBOARD_ATKBD_HP_KEYCODES
	default n
	help
	  If you have an RDI PrecisionBook, say Y here if you want to use its
	  built-in keyboard (as opposed to an external keyboard).

	  The PrecisionBook has five keys that conflict with those used by most
	  AT and PS/2 keyboards. These are as follows:

	    PrecisionBook    Standard AT or PS/2

	    F1               F12
	    Left Ctrl        Left Alt
	    Caps Lock        Left Ctrl
	    Right Ctrl       Caps Lock
	    Left             102nd key (the key to the right of Left Shift)

	  If you say N here, and use the PrecisionBook keyboard, then each key
	  in the left-hand column will be interpreted as the corresponding key
	  in the right-hand column.

	  If you say Y here, and use an external keyboard, then each key in the
	  right-hand column will be interpreted as the key shown in the
	  left-hand column.

config QT2160
	tristate "Atmel AT42QT2160 Touch Sensor Chip"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for Atmel AT42QT2160 Touch
	  Sensor chip as a keyboard input.

	  This driver can also be built as a module. If so, the module
	  will be called qt2160.

config KEYBOARD_BFIN
	tristate "Blackfin BF54x keypad support"
	depends on (BF54x && !BF544)
	help
	  Say Y here if you want to use the BF54x keypad.

	  To compile this driver as a module, choose M here: the
	  module will be called bf54x-keys.

config KEYBOARD_LKKBD
	tristate "DECstation/VAXstation LK201/LK401 keyboard"
	select SERIO
	help
	  Say Y here if you want to use a LK201 or LK401 style serial
	  keyboard. This keyboard is also useable on PCs if you attach
	  it with the inputattach program. The connector pinout is
	  described within lkkbd.c.

	  To compile this driver as a module, choose M here: the
	  module will be called lkkbd.

config KEYBOARD_EP93XX
	tristate "EP93xx Matrix Keypad support"
	depends on ARCH_EP93XX
	help
	  Say Y here to enable the matrix keypad on the Cirrus EP93XX.

	  To compile this driver as a module, choose M here: the
	  module will be called ep93xx_keypad.

config KEYBOARD_GPIO
	tristate "GPIO Buttons"
	depends on GENERIC_GPIO
	help
	  This driver implements support for buttons connected
	  to GPIO pins of various CPUs (and some other chips).

	  Say Y here if your device has buttons connected
	  directly to such GPIO pins.  Your board-specific
	  setup logic must also provide a platform device,
	  with configuration data saying which GPIOs are used.

	  To compile this driver as a module, choose M here: the
	  module will be called gpio_keys.

config KEYBOARD_TCA6416
	tristate "TCA6416 Keypad Support"
	depends on I2C
	help
	  This driver implements basic keypad functionality
	  for keys connected through TCA6416 IO expander

	  Say Y here if your device has keys connected to
	  TCA6416 IO expander. Your board-specific setup logic
	  must also provide pin-mask details(of which TCA6416 pins
	  are used for keypad).

	  If enabled the complete TCA6416 device will be managed through
	  this driver.


config KEYBOARD_MATRIX
	tristate "GPIO driven matrix keypad support"
	depends on GENERIC_GPIO
	help
	  Enable support for GPIO driven matrix keypad.

	  To compile this driver as a module, choose M here: the
	  module will be called matrix_keypad.

config KEYBOARD_HIL_OLD
	tristate "HP HIL keyboard support (simple driver)"
	depends on GSC || HP300
	default y
	help
	  The "Human Interface Loop" is a older, 8-channel USB-like
	  controller used in several Hewlett Packard models. This driver
	  was adapted from the one written for m68k/hp300, and implements
	  support for a keyboard attached to the HIL port, but not for
	  any other types of HIL input devices like mice or tablets.
	  However, it has been thoroughly tested and is stable.

	  If you want full HIL support including support for multiple
	  keyboards, mice, and tablets, you have to enable the
	  "HP System Device Controller i8042 Support" in the input/serio
	  submenu.

config KEYBOARD_HIL
	tristate "HP HIL keyboard/pointer support"
	depends on GSC || HP300
	default y
	select HP_SDC
	select HIL_MLC
	select SERIO
	help
	  The "Human Interface Loop" is a older, 8-channel USB-like
	  controller used in several Hewlett Packard models.
	  This driver implements support for HIL-keyboards and pointing
	  devices (mice, tablets, touchscreens) attached
	  to your machine, so normally you should say Y here.

config KEYBOARD_HP6XX
	tristate "HP Jornada 6xx keyboard"
	depends on SH_HP6XX
	select INPUT_POLLDEV
	help
	  Say Y here if you have a HP Jornada 620/660/680/690 and want to
	  support the built-in keyboard.

	  To compile this driver as a module, choose M here: the
	  module will be called jornada680_kbd.

config KEYBOARD_HP7XX
	tristate "HP Jornada 7xx keyboard"
	depends on SA1100_JORNADA720_SSP && SA1100_SSP
	help
	  Say Y here if you have a HP Jornada 710/720/728 and want to
	  support the built-in keyboard.

	  To compile this driver as a module, choose M here: the
	  module will be called jornada720_kbd.

config KEYBOARD_LM8323
	tristate "LM8323 keypad chip"
	depends on I2C
	depends on LEDS_CLASS
	help
	  If you say yes here you get support for the National Semiconductor
	  LM8323 keypad controller.

	  To compile this driver as a module, choose M here: the
	  module will be called lm8323.

config KEYBOARD_LOCOMO
	tristate "LoCoMo Keyboard Support"
	depends on SHARP_LOCOMO
	help
	  Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA

	  To compile this driver as a module, choose M here: the
	  module will be called locomokbd.

config KEYBOARD_MAPLE
	tristate "Maple bus keyboard"
	depends on SH_DREAMCAST && MAPLE
	help
	  Say Y here if you have a Dreamcast console running Linux and have
	  a keyboard attached to its Maple bus.

	  To compile this driver as a module, choose M here: the
	  module will be called maple_keyb.

config KEYBOARD_MAX7359
	tristate "Maxim MAX7359 Key Switch Controller"
	depends on I2C
	help
	  If you say yes here you get support for the Maxim MAX7359 Key
	  Switch Controller chip. This providers microprocessors with
	  management of up to 64 key switches

	  To compile this driver as a module, choose M here: the
	  module will be called max7359_keypad.

config KEYBOARD_IMX
	tristate "IMX keypad support"
	depends on ARCH_MXC
	help
	  Enable support for IMX keypad port.

	  To compile this driver as a module, choose M here: the
	  module will be called imx_keypad.

config KEYBOARD_NEWTON
	tristate "Newton keyboard"
	select SERIO
	help
	  Say Y here if you have a Newton keyboard on a serial port.

	  To compile this driver as a module, choose M here: the
	  module will be called newtonkbd.

config KEYBOARD_OPENCORES
	tristate "OpenCores Keyboard Controller"
	help
	  Say Y here if you want to use the OpenCores Keyboard Controller
	  http://www.opencores.org/project,keyboardcontroller

	  To compile this driver as a module, choose M here; the
	  module will be called opencores-kbd.

config KEYBOARD_PXA27x
	tristate "PXA27x/PXA3xx keypad support"
	depends on PXA27x || PXA3xx
	help
	  Enable support for PXA27x/PXA3xx keypad controller.

	  To compile this driver as a module, choose M here: the
	  module will be called pxa27x_keypad.

config KEYBOARD_PXA930_ROTARY
	tristate "PXA930/PXA935 Enhanced Rotary Controller Support"
	depends on CPU_PXA930 || CPU_PXA935
	help
	  Enable support for PXA930/PXA935 Enhanced Rotary Controller.

	  To compile this driver as a module, choose M here: the
	  module will be called pxa930_rotary.

config KEYBOARD_STOWAWAY
	tristate "Stowaway keyboard"
	select SERIO
	help
	  Say Y here if you have a Stowaway keyboard on a serial port.
	  Stowaway compatible keyboards like Dicota Input-PDA keyboard
	  are also supported by this driver.

	  To compile this driver as a module, choose M here: the
	  module will be called stowaway.

config KEYBOARD_SUNKBD
	tristate "Sun Type 4 and Type 5 keyboard"
	select SERIO
	help
	  Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
	  connected either to the Sun keyboard connector or to an serial
	  (RS-232) port via a simple adapter.

	  To compile this driver as a module, choose M here: the
	  module will be called sunkbd.

config KEYBOARD_SH_KEYSC
	tristate "SuperH KEYSC keypad support"
	depends on SUPERH || ARCH_SHMOBILE
	help
	  Say Y here if you want to use a keypad attached to the KEYSC block
	  on SuperH processors such as sh7722 and sh7343.

	  To compile this driver as a module, choose M here: the
	  module will be called sh_keysc.

config KEYBOARD_DAVINCI
	tristate "TI DaVinci Key Scan"
	depends on ARCH_DAVINCI_DM365
	help
	  Say Y to enable keypad module support for the TI DaVinci
	  platforms (DM365).

	  To compile this driver as a module, choose M here: the
	  module will be called davinci_keyscan.

config KEYBOARD_OMAP
	tristate "TI OMAP keypad support"
	depends on (ARCH_OMAP1 || ARCH_OMAP2)
	help
	  Say Y here if you want to use the OMAP keypad.

	  To compile this driver as a module, choose M here: the
	  module will be called omap-keypad.

config KEYBOARD_TWL4030
	tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
	depends on TWL4030_CORE
	help
	  Say Y here if your board use the keypad controller on
	  TWL4030 family chips.  It's safe to say enable this
	  even on boards that don't use the keypad controller.

	  To compile this driver as a module, choose M here: the
	  module will be called twl4030_keypad.

config KEYBOARD_XTKBD
	tristate "XT keyboard"
	select SERIO
	help
	  Say Y here if you want to use the old IBM PC/XT keyboard (or
	  compatible) on your system. This is only possible with a
	  parallel port keyboard adapter, you cannot connect it to the
	  keyboard port on a PC that runs Linux.

	  To compile this driver as a module, choose M here: the
	  module will be called xtkbd.

config KEYBOARD_W90P910
	tristate "W90P910 Matrix Keypad support"
	depends on ARCH_W90X900
	help
	  Say Y here to enable the matrix keypad on evaluation board
	  based on W90P910.

	  To compile this driver as a module, choose M here: the
	  module will be called w90p910_keypad.

endif
Commit	Line	Data
1da177e4 LT	1	#
	2	# Input core configuration
	3	#
	4	menuconfig INPUT_KEYBOARD
	5	bool "Keyboards" if EMBEDDED \|\| !X86
	6	default y
	7	help
	8	Say Y here, and a list of supported keyboards will be displayed.
	9	This option doesn't affect the kernel.
	10
	11	If unsure, say Y.
	12
	13	if INPUT_KEYBOARD
	14
cb589529 DT	15	config KEYBOARD_AAED2000
	16	tristate "AAED-2000 keyboard"
	17	depends on MACH_AAED2000
	18	select INPUT_POLLDEV
	19	default y
	20	help
	21	Say Y here to enable the keyboard on the Agilent AAED-2000
	22	development board.
	23
	24	To compile this driver as a module, choose M here: the
	25	module will be called aaed2000_kbd.
	26
fba65fe0 MH	27	config KEYBOARD_ADP5520
	28	tristate "Keypad Support for ADP5520 PMIC"
	29	depends on PMIC_ADP5520
	30	help
	31	This option enables support for the keypad scan matrix
	32	on Analog Devices ADP5520 PMICs.
	33
	34	To compile this driver as a module, choose M here: the module will
	35	be called adp5520-keys.
	36
88751dd6	37	config KEYBOARD_ADP5588
5a9003db	38	tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander"
88751dd6 MH	39	depends on I2C
88751dd6 MH	40	help
5a9003db	41	Say Y here if you want to use a ADP5588/87 attached to your
88751dd6 MH	42	system I2C bus.
	43
	44	To compile this driver as a module, choose M here: the
	45	module will be called adp5588-keys.
	46
cb589529 DT	47	config KEYBOARD_AMIGA
	48	tristate "Amiga keyboard"
	49	depends on AMIGA
	50	help
	51	Say Y here if you are running Linux on any AMIGA and have a keyboard
	52	attached.
	53
	54	To compile this driver as a module, choose M here: the
	55	module will be called amikbd.
	56
	57	config ATARI_KBD_CORE
	58	bool
	59
	60	config KEYBOARD_ATARI
	61	tristate "Atari keyboard"
	62	depends on ATARI
	63	select ATARI_KBD_CORE
	64	help
	65	Say Y here if you are running Linux on any Atari and have a keyboard
	66	attached.
	67
	68	To compile this driver as a module, choose M here: the
	69	module will be called atakbd.
	70
1da177e4	71	config KEYBOARD_ATKBD
0b28bac5	72	tristate "AT keyboard" if EMBEDDED \|\| !X86 \|\| X86_MRST
1da177e4 LT	73	default y
	74	select SERIO
	75	select SERIO_LIBPS2
685afae0	76	select SERIO_I8042 if X86 && !X86_MRST
1da177e4 LT	77	select SERIO_GSCPS2 if GSC
	78	help
	79	Say Y here if you want to use a standard AT or PS/2 keyboard. Usually
	80	you'll need this, unless you have a different type keyboard (USB, ADB
	81	or other). This also works for AT and PS/2 keyboards connected over a
	82	PS/2 to serial converter.
	83
	84	If unsure, say Y.
	85
	86	To compile this driver as a module, choose M here: the
	87	module will be called atkbd.
	88
	89	config KEYBOARD_ATKBD_HP_KEYCODES
	90	bool "Use HP keyboard scancodes"
	91	depends on PARISC && KEYBOARD_ATKBD
	92	default y
	93	help
	94	Say Y here if you have a PA-RISC machine and want to use an AT or
	95	PS/2 keyboard, and your keyboard uses keycodes that are specific to
	96	PA-RISC keyboards.
	97
	98	Say N if you use a standard keyboard.
	99
	100	config KEYBOARD_ATKBD_RDI_KEYCODES
	101	bool "Use PrecisionBook keyboard scancodes"
	102	depends on KEYBOARD_ATKBD_HP_KEYCODES
	103	default n
	104	help
	105	If you have an RDI PrecisionBook, say Y here if you want to use its
	106	built-in keyboard (as opposed to an external keyboard).
	107
	108	The PrecisionBook has five keys that conflict with those used by most
	109	AT and PS/2 keyboards. These are as follows:
	110
	111	PrecisionBook Standard AT or PS/2
	112
	113	F1 F12
	114	Left Ctrl Left Alt
	115	Caps Lock Left Ctrl
	116	Right Ctrl Caps Lock
	117	Left 102nd key (the key to the right of Left Shift)
	118
	119	If you say N here, and use the PrecisionBook keyboard, then each key
	120	in the left-hand column will be interpreted as the corresponding key
	121	in the right-hand column.
	122
	123	If you say Y here, and use an external keyboard, then each key in the
	124	right-hand column will be interpreted as the key shown in the
	125	left-hand column.
	126
fde11323 RDP	127	config QT2160
	128	tristate "Atmel AT42QT2160 Touch Sensor Chip"
	129	depends on I2C && EXPERIMENTAL
	130	help
	131	If you say yes here you get support for Atmel AT42QT2160 Touch
	132	Sensor chip as a keyboard input.
	133
	134	This driver can also be built as a module. If so, the module
	135	will be called qt2160.
	136
cb589529 DT	137	config KEYBOARD_BFIN
	138	tristate "Blackfin BF54x keypad support"
	139	depends on (BF54x && !BF544)
f35d0616	140	help
cb589529	141	Say Y here if you want to use the BF54x keypad.
f35d0616 MV	142
f35d0616 MV	143	To compile this driver as a module, choose M here: the
cb589529	144	module will be called bf54x-keys.
f35d0616	145
cb589529 DT	146	config KEYBOARD_LKKBD
	147	tristate "DECstation/VAXstation LK201/LK401 keyboard"
	148	select SERIO
fff71312	149	help
cb589529 DT	150	Say Y here if you want to use a LK201 or LK401 style serial
	151	keyboard. This keyboard is also useable on PCs if you attach
	152	it with the inputattach program. The connector pinout is
	153	described within lkkbd.c.
fff71312 RP	154
fff71312 RP	155	To compile this driver as a module, choose M here: the
cb589529	156	module will be called lkkbd.
fff71312	157
cb589529 DT	158	config KEYBOARD_EP93XX
	159	tristate "EP93xx Matrix Keypad support"
	160	depends on ARCH_EP93XX
93e9012f	161	help
cb589529	162	Say Y here to enable the matrix keypad on the Cirrus EP93XX.
93e9012f DES	163
93e9012f DES	164	To compile this driver as a module, choose M here: the
cb589529	165	module will be called ep93xx_keypad.
93e9012f	166
cb589529 DT	167	config KEYBOARD_GPIO
	168	tristate "GPIO Buttons"
	169	depends on GENERIC_GPIO
1da177e4	170	help
cb589529 DT	171	This driver implements support for buttons connected
cb589529 DT	172	to GPIO pins of various CPUs (and some other chips).
0e52d328	173
cb589529 DT	174	Say Y here if your device has buttons connected
	175	directly to such GPIO pins. Your board-specific
	176	setup logic must also provide a platform device,
	177	with configuration data saying which GPIOs are used.
c04cb856 MS	178
c04cb856 MS	179	To compile this driver as a module, choose M here: the
bab7614d EM	180	module will be called gpio_keys.
bab7614d EM	181
30ba3ead SG	182	config KEYBOARD_TCA6416
	183	tristate "TCA6416 Keypad Support"
	184	depends on I2C
	185	help
	186	This driver implements basic keypad functionality
	187	for keys connected through TCA6416 IO expander
	188
	189	Say Y here if your device has keys connected to
	190	TCA6416 IO expander. Your board-specific setup logic
	191	must also provide pin-mask details(of which TCA6416 pins
	192	are used for keypad).
	193
	194	If enabled the complete TCA6416 device will be managed through
	195	this driver.
	196
	197
bab7614d EM	198	config KEYBOARD_MATRIX
	199	tristate "GPIO driven matrix keypad support"
	200	depends on GENERIC_GPIO
	201	help
	202	Enable support for GPIO driven matrix keypad.
	203
	204	To compile this driver as a module, choose M here: the
	205	module will be called matrix_keypad.
c04cb856	206
1da177e4 LT	207	config KEYBOARD_HIL_OLD
1da177e4 LT	208	tristate "HP HIL keyboard support (simple driver)"
da96d0b5	209	depends on GSC \|\| HP300
1da177e4 LT	210	default y
	211	help
	212	The "Human Interface Loop" is a older, 8-channel USB-like
	213	controller used in several Hewlett Packard models. This driver
	214	was adapted from the one written for m68k/hp300, and implements
	215	support for a keyboard attached to the HIL port, but not for
	216	any other types of HIL input devices like mice or tablets.
	217	However, it has been thoroughly tested and is stable.
	218
	219	If you want full HIL support including support for multiple
09509603	220	keyboards, mice, and tablets, you have to enable the
1da177e4 LT	221	"HP System Device Controller i8042 Support" in the input/serio
	222	submenu.
	223
	224	config KEYBOARD_HIL
fa71c605	225	tristate "HP HIL keyboard/pointer support"
da96d0b5	226	depends on GSC \|\| HP300
1da177e4 LT	227	default y
	228	select HP_SDC
	229	select HIL_MLC
	230	select SERIO
	231	help
	232	The "Human Interface Loop" is a older, 8-channel USB-like
	233	controller used in several Hewlett Packard models.
fa71c605 DT	234	This driver implements support for HIL-keyboards and pointing
fa71c605 DT	235	devices (mice, tablets, touchscreens) attached
1da177e4 LT	236	to your machine, so normally you should say Y here.
1da177e4 LT	237
2aa2cb9e	238	config KEYBOARD_HP6XX
4ff891eb	239	tristate "HP Jornada 6xx keyboard"
2aa2cb9e KE	240	depends on SH_HP6XX
	241	select INPUT_POLLDEV
	242	help
4ff891eb KE	243	Say Y here if you have a HP Jornada 620/660/680/690 and want to
4ff891eb KE	244	support the built-in keyboard.
2aa2cb9e KE	245
	246	To compile this driver as a module, choose M here: the
	247	module will be called jornada680_kbd.
	248
b0a4e1aa	249	config KEYBOARD_HP7XX
4ff891eb	250	tristate "HP Jornada 7xx keyboard"
b0a4e1aa KE	251	depends on SA1100_JORNADA720_SSP && SA1100_SSP
b0a4e1aa KE	252	help
4ff891eb KE	253	Say Y here if you have a HP Jornada 710/720/728 and want to
4ff891eb KE	254	support the built-in keyboard.
b0a4e1aa KE	255
	256	To compile this driver as a module, choose M here: the
	257	module will be called jornada720_kbd.
	258
a48b2d4a FB	259	config KEYBOARD_LM8323
	260	tristate "LM8323 keypad chip"
	261	depends on I2C
	262	depends on LEDS_CLASS
	263	help
	264	If you say yes here you get support for the National Semiconductor
	265	LM8323 keypad controller.
	266
	267	To compile this driver as a module, choose M here: the
	268	module will be called lm8323.
	269
cb589529 DT	270	config KEYBOARD_LOCOMO
	271	tristate "LoCoMo Keyboard Support"
	272	depends on SHARP_LOCOMO
ad4e09b1	273	help
cb589529	274	Say Y here if you are running Linux on a Sharp Zaurus Collie or Poodle based PDA
ad4e09b1 KS	275
ad4e09b1 KS	276	To compile this driver as a module, choose M here: the
cb589529 DT	277	module will be called locomokbd.
	278
	279	config KEYBOARD_MAPLE
	280	tristate "Maple bus keyboard"
	281	depends on SH_DREAMCAST && MAPLE
	282	help
	283	Say Y here if you have a Dreamcast console running Linux and have
	284	a keyboard attached to its Maple bus.
	285
	286	To compile this driver as a module, choose M here: the
	287	module will be called maple_keyb.
	288
0baf81ba KK	289	config KEYBOARD_MAX7359
	290	tristate "Maxim MAX7359 Key Switch Controller"
	291	depends on I2C
	292	help
	293	If you say yes here you get support for the Maxim MAX7359 Key
	294	Switch Controller chip. This providers microprocessors with
	295	management of up to 64 key switches
	296
	297	To compile this driver as a module, choose M here: the
	298	module will be called max7359_keypad.
	299
76cdc083 AP	300	config KEYBOARD_IMX
	301	tristate "IMX keypad support"
	302	depends on ARCH_MXC
	303	help
	304	Enable support for IMX keypad port.
	305
	306	To compile this driver as a module, choose M here: the
	307	module will be called imx_keypad.
	308
cb589529 DT	309	config KEYBOARD_NEWTON
	310	tristate "Newton keyboard"
	311	select SERIO
	312	help
	313	Say Y here if you have a Newton keyboard on a serial port.
	314
	315	To compile this driver as a module, choose M here: the
	316	module will be called newtonkbd.
ad4e09b1	317
422b552d JH	318	config KEYBOARD_OPENCORES
	319	tristate "OpenCores Keyboard Controller"
	320	help
	321	Say Y here if you want to use the OpenCores Keyboard Controller
	322	http://www.opencores.org/project,keyboardcontroller
	323
	324	To compile this driver as a module, choose M here; the
	325	module will be called opencores-kbd.
	326
5a90e5bc	327	config KEYBOARD_PXA27x
e0f2677f EM	328	tristate "PXA27x/PXA3xx keypad support"
e0f2677f EM	329	depends on PXA27x \|\| PXA3xx
5a90e5bc	330	help
bab7614d	331	Enable support for PXA27x/PXA3xx keypad controller.
5a90e5bc RG	332
5a90e5bc RG	333	To compile this driver as a module, choose M here: the
0e5f11aa	334	module will be called pxa27x_keypad.
5a90e5bc	335
e0ee6298 YY	336	config KEYBOARD_PXA930_ROTARY
	337	tristate "PXA930/PXA935 Enhanced Rotary Controller Support"
	338	depends on CPU_PXA930 \|\| CPU_PXA935
	339	help
	340	Enable support for PXA930/PXA935 Enhanced Rotary Controller.
	341
	342	To compile this driver as a module, choose M here: the
	343	module will be called pxa930_rotary.
	344
cb589529 DT	345	config KEYBOARD_STOWAWAY
	346	tristate "Stowaway keyboard"
	347	select SERIO
b11d2127	348	help
cb589529 DT	349	Say Y here if you have a Stowaway keyboard on a serial port.
	350	Stowaway compatible keyboards like Dicota Input-PDA keyboard
	351	are also supported by this driver.
b11d2127 AM	352
b11d2127 AM	353	To compile this driver as a module, choose M here: the
cb589529	354	module will be called stowaway.
b11d2127	355
cb589529 DT	356	config KEYBOARD_SUNKBD
	357	tristate "Sun Type 4 and Type 5 keyboard"
	358	select SERIO
8f740ef3	359	help
cb589529 DT	360	Say Y here if you want to use a Sun Type 4 or Type 5 keyboard,
	361	connected either to the Sun keyboard connector or to an serial
	362	(RS-232) port via a simple adapter.
8f740ef3 MH	363
8f740ef3 MH	364	To compile this driver as a module, choose M here: the
cb589529	365	module will be called sunkbd.
8f740ef3	366
795e6bf3 MD	367	config KEYBOARD_SH_KEYSC
795e6bf3 MD	368	tristate "SuperH KEYSC keypad support"
4e45ad5e	369	depends on SUPERH \|\| ARCH_SHMOBILE
795e6bf3 MD	370	help
	371	Say Y here if you want to use a keypad attached to the KEYSC block
	372	on SuperH processors such as sh7722 and sh7343.
	373
	374	To compile this driver as a module, choose M here: the
	375	module will be called sh_keysc.
a48b2d4a	376
bc09dcad MA	377	config KEYBOARD_DAVINCI
	378	tristate "TI DaVinci Key Scan"
	379	depends on ARCH_DAVINCI_DM365
	380	help
	381	Say Y to enable keypad module support for the TI DaVinci
	382	platforms (DM365).
	383
	384	To compile this driver as a module, choose M here: the
	385	module will be called davinci_keyscan.
	386
cb589529 DT	387	config KEYBOARD_OMAP
	388	tristate "TI OMAP keypad support"
	389	depends on (ARCH_OMAP1 \|\| ARCH_OMAP2)
e06003af	390	help
cb589529	391	Say Y here if you want to use the OMAP keypad.
e06003af HS	392
e06003af HS	393	To compile this driver as a module, choose M here: the
cb589529 DT	394	module will be called omap-keypad.
cb589529 DT	395
9d834068 DB	396	config KEYBOARD_TWL4030
	397	tristate "TI TWL4030/TWL5030/TPS659x0 keypad support"
	398	depends on TWL4030_CORE
	399	help
	400	Say Y here if your board use the keypad controller on
	401	TWL4030 family chips. It's safe to say enable this
	402	even on boards that don't use the keypad controller.
	403
	404	To compile this driver as a module, choose M here: the
	405	module will be called twl4030_keypad.
	406
cb589529 DT	407	config KEYBOARD_XTKBD
	408	tristate "XT keyboard"
	409	select SERIO
	410	help
	411	Say Y here if you want to use the old IBM PC/XT keyboard (or
	412	compatible) on your system. This is only possible with a
	413	parallel port keyboard adapter, you cannot connect it to the
	414	keyboard port on a PC that runs Linux.
	415
	416	To compile this driver as a module, choose M here: the
	417	module will be called xtkbd.
e06003af	418
4a15235e WZ	419	config KEYBOARD_W90P910
	420	tristate "W90P910 Matrix Keypad support"
	421	depends on ARCH_W90X900
	422	help
	423	Say Y here to enable the matrix keypad on evaluation board
	424	based on W90P910.
	425
	426	To compile this driver as a module, choose M here: the
	427	module will be called w90p910_keypad.
	428
1da177e4	429	endif