]> bbs.cooldavid.org Git - net-next-2.6.git/blame - drivers/ide/delkin_cb.c
xps: Transmit Packet Steering
[net-next-2.6.git] / drivers / ide / delkin_cb.c
CommitLineData
78281c53 1/*
78281c53
ML
2 * Created 20 Oct 2004 by Mark Lord
3 *
4 * Basic support for Delkin/ASKA/Workbit Cardbus CompactFlash adapter
5 *
6 * Modeled after the 16-bit PCMCIA driver: ide-cs.c
7 *
8 * This is slightly peculiar, in that it is a PCI driver,
9 * but is NOT an IDE PCI driver -- the IDE layer does not directly
10 * support hot insertion/removal of PCI interfaces, so this driver
11 * is unable to use the IDE PCI interfaces. Instead, it uses the
12 * same interfaces as the ide-cs (PCMCIA) driver uses.
13 * On the plus side, the driver is also smaller/simpler this way.
14 *
15 * This file is subject to the terms and conditions of the GNU General Public
16 * License. See the file COPYING in the main directory of this archive for
17 * more details.
18 */
78829dd9 19
78281c53
ML
20#include <linux/types.h>
21#include <linux/module.h>
78281c53
ML
22#include <linux/ide.h>
23#include <linux/init.h>
24#include <linux/pci.h>
78829dd9 25
78281c53
ML
26#include <asm/io.h>
27
28/*
29 * No chip documentation has yet been found,
30 * so these configuration values were pulled from
31 * a running Win98 system using "debug".
32 * This gives around 3MByte/second read performance,
33 * which is about 2/3 of what the chip is capable of.
34 *
35 * There is also a 4KByte mmio region on the card,
36 * but its purpose has yet to be reverse-engineered.
37 */
38static const u8 setup[] = {
39 0x00, 0x05, 0xbe, 0x01, 0x20, 0x8f, 0x00, 0x00,
40 0xa4, 0x1f, 0xb3, 0x1b, 0x00, 0x00, 0x00, 0x80,
41 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
42 0x00, 0x00, 0x00, 0x00, 0xa4, 0x83, 0x02, 0x13,
43};
44
ac95beed
BZ
45static const struct ide_port_ops delkin_cb_port_ops = {
46 .quirkproc = ide_undecoded_slave,
47};
48
2ed0ef54 49static int delkin_cb_init_chipset(struct pci_dev *dev)
8c061a40
BZ
50{
51 unsigned long base = pci_resource_start(dev, 0);
52 int i;
53
54 outb(0x02, base + 0x1e); /* set nIEN to block interrupts */
55 inb(base + 0x17); /* read status to clear interrupts */
56
57 for (i = 0; i < sizeof(setup); ++i) {
58 if (setup[i])
59 outb(setup[i], base + i);
60 }
61
62 return 0;
63}
64
1c4d4ad5
BZ
65static const struct ide_port_info delkin_cb_port_info = {
66 .port_ops = &delkin_cb_port_ops,
67 .host_flags = IDE_HFLAG_IO_32BIT | IDE_HFLAG_UNMASK_IRQS |
68 IDE_HFLAG_NO_DMA,
255115fb 69 .irq_flags = IRQF_SHARED,
8c061a40 70 .init_chipset = delkin_cb_init_chipset,
29e52cf7 71 .chipset = ide_pci,
1c4d4ad5
BZ
72};
73
78281c53
ML
74static int __devinit
75delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
76{
48c3c107 77 struct ide_host *host;
78281c53 78 unsigned long base;
8c061a40 79 int rc;
9f36d314 80 struct ide_hw hw, *hws[] = { &hw };
78281c53
ML
81
82 rc = pci_enable_device(dev);
83 if (rc) {
84 printk(KERN_ERR "delkin_cb: pci_enable_device failed (%d)\n", rc);
85 return rc;
86 }
87 rc = pci_request_regions(dev, "delkin_cb");
88 if (rc) {
89 printk(KERN_ERR "delkin_cb: pci_request_regions failed (%d)\n", rc);
90 pci_disable_device(dev);
91 return rc;
92 }
93 base = pci_resource_start(dev, 0);
8c061a40
BZ
94
95 delkin_cb_init_chipset(dev);
78281c53
ML
96
97 memset(&hw, 0, sizeof(hw));
98 ide_std_init_ports(&hw, base + 0x10, base + 0x1e);
99 hw.irq = dev->irq;
8a7dbb97 100 hw.dev = &dev->dev;
78281c53 101
dca39830 102 rc = ide_host_add(&delkin_cb_port_info, hws, 1, &host);
6f904d01 103 if (rc)
9e016a71
BZ
104 goto out_disable;
105
48c3c107 106 pci_set_drvdata(dev, host);
8a7dbb97 107
78281c53 108 return 0;
9e016a71
BZ
109
110out_disable:
7f6f33c1 111 pci_release_regions(dev);
9e016a71 112 pci_disable_device(dev);
6f904d01 113 return rc;
78281c53
ML
114}
115
116static void
117delkin_cb_remove (struct pci_dev *dev)
118{
48c3c107 119 struct ide_host *host = pci_get_drvdata(dev);
78281c53 120
48c3c107 121 ide_host_remove(host);
f82c2b17 122
7f6f33c1 123 pci_release_regions(dev);
78281c53
ML
124 pci_disable_device(dev);
125}
126
8c061a40
BZ
127#ifdef CONFIG_PM
128static int delkin_cb_suspend(struct pci_dev *dev, pm_message_t state)
129{
130 pci_save_state(dev);
131 pci_disable_device(dev);
132 pci_set_power_state(dev, pci_choose_state(dev, state));
133
134 return 0;
135}
136
137static int delkin_cb_resume(struct pci_dev *dev)
138{
139 struct ide_host *host = pci_get_drvdata(dev);
140 int rc;
141
142 pci_set_power_state(dev, PCI_D0);
143
144 rc = pci_enable_device(dev);
145 if (rc)
146 return rc;
147
148 pci_restore_state(dev);
149 pci_set_master(dev);
150
151 if (host->init_chipset)
152 host->init_chipset(dev);
153
154 return 0;
155}
156#else
157#define delkin_cb_suspend NULL
158#define delkin_cb_resume NULL
159#endif
160
78281c53
ML
161static struct pci_device_id delkin_cb_pci_tbl[] __devinitdata = {
162 { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
2571b16d 163 { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
78281c53
ML
164 { 0, },
165};
166MODULE_DEVICE_TABLE(pci, delkin_cb_pci_tbl);
167
a9ab09e2 168static struct pci_driver delkin_cb_pci_driver = {
78281c53
ML
169 .name = "Delkin-ASKA-Workbit Cardbus IDE",
170 .id_table = delkin_cb_pci_tbl,
171 .probe = delkin_cb_probe,
172 .remove = delkin_cb_remove,
8c061a40
BZ
173 .suspend = delkin_cb_suspend,
174 .resume = delkin_cb_resume,
78281c53
ML
175};
176
f4084a1d 177static int __init delkin_cb_init(void)
78281c53 178{
a9ab09e2 179 return pci_register_driver(&delkin_cb_pci_driver);
78281c53
ML
180}
181
f4084a1d 182static void __exit delkin_cb_exit(void)
78281c53 183{
a9ab09e2 184 pci_unregister_driver(&delkin_cb_pci_driver);
78281c53
ML
185}
186
187module_init(delkin_cb_init);
188module_exit(delkin_cb_exit);
189
190MODULE_AUTHOR("Mark Lord");
191MODULE_DESCRIPTION("Basic support for Delkin/ASKA/Workbit Cardbus IDE");
192MODULE_LICENSE("GPL");
193