[net-next-2.6.git] / drivers / hwmon / lm73.c

/*
 * LM73 Sensor driver
 * Based on LM75
 *
 * Copyright (C) 2007, CenoSYS (www.cenosys.com).
 * Copyright (C) 2009, Bollore telecom (www.bolloretelecom.eu).
 *
 * Guillaume Ligneul <guillaume.ligneul@gmail.com>
 * Adrien Demarez <adrien.demarez@bolloretelecom.eu>
 * Jeremy Laine <jeremy.laine@bolloretelecom.eu>
 *
 * This software program is licensed subject to the GNU General Public License
 * (GPL).Version 2,June 1991, available at
 * http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
 */

#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>


/* Addresses scanned */
static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4c,
					0x4d, 0x4e, I2C_CLIENT_END };

/* Insmod parameters */
I2C_CLIENT_INSMOD_1(lm73);

/* LM73 registers */
#define LM73_REG_INPUT		0x00
#define LM73_REG_CONF		0x01
#define LM73_REG_MAX		0x02
#define LM73_REG_MIN		0x03
#define LM73_REG_CTRL		0x04
#define LM73_REG_ID		0x07

#define LM73_ID			0x9001 /* or 0x190 after a swab16() */
#define DRVNAME			"lm73"
#define LM73_TEMP_MIN		(-40)
#define LM73_TEMP_MAX		150

/*-----------------------------------------------------------------------*/


static ssize_t set_temp(struct device *dev, struct device_attribute *da,
			const char *buf, size_t count)
{
	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
	struct i2c_client *client = to_i2c_client(dev);
	long temp;
	short value;

	int status = strict_strtol(buf, 10, &temp);
	if (status < 0)
		return status;

	/* Write value */
	value = (short) SENSORS_LIMIT(temp/250, (LM73_TEMP_MIN*4),
		(LM73_TEMP_MAX*4)) << 5;
	i2c_smbus_write_word_data(client, attr->index, swab16(value));
	return count;
}

static ssize_t show_temp(struct device *dev, struct device_attribute *da,
			 char *buf)
{
	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
	struct i2c_client *client = to_i2c_client(dev);
	/* use integer division instead of equivalent right shift to
	   guarantee arithmetic shift and preserve the sign */
	int temp = ((s16) (swab16(i2c_smbus_read_word_data(client,
		attr->index)))*250) / 32;
	return sprintf(buf, "%d\n", temp);
}


/*-----------------------------------------------------------------------*/

/* sysfs attributes for hwmon */

static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
			show_temp, set_temp, LM73_REG_MAX);
static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO,
			show_temp, set_temp, LM73_REG_MIN);
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
			show_temp, NULL, LM73_REG_INPUT);


static struct attribute *lm73_attributes[] = {
	&sensor_dev_attr_temp1_input.dev_attr.attr,
	&sensor_dev_attr_temp1_max.dev_attr.attr,
	&sensor_dev_attr_temp1_min.dev_attr.attr,

	NULL
};

static const struct attribute_group lm73_group = {
	.attrs = lm73_attributes,
};

/*-----------------------------------------------------------------------*/

/* device probe and removal */

static int
lm73_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
	struct device *hwmon_dev;
	int status;

	/* Register sysfs hooks */
	status = sysfs_create_group(&client->dev.kobj, &lm73_group);
	if (status)
		return status;

	hwmon_dev = hwmon_device_register(&client->dev);
	if (IS_ERR(hwmon_dev)) {
		status = PTR_ERR(hwmon_dev);
		goto exit_remove;
	}
	i2c_set_clientdata(client, hwmon_dev);

	dev_info(&client->dev, "%s: sensor '%s'\n",
		 dev_name(hwmon_dev), client->name);

	return 0;

exit_remove:
	sysfs_remove_group(&client->dev.kobj, &lm73_group);
	return status;
}

static int lm73_remove(struct i2c_client *client)
{
	struct device *hwmon_dev = i2c_get_clientdata(client);

	hwmon_device_unregister(hwmon_dev);
	sysfs_remove_group(&client->dev.kobj, &lm73_group);
	i2c_set_clientdata(client, NULL);
	return 0;
}

static const struct i2c_device_id lm73_ids[] = {
	{ "lm73", lm73 },
	{ /* LIST END */ }
};
MODULE_DEVICE_TABLE(i2c, lm73_ids);

/* Return 0 if detection is successful, -ENODEV otherwise */
static int lm73_detect(struct i2c_client *new_client,
			struct i2c_board_info *info)
{
	struct i2c_adapter *adapter = new_client->adapter;
	u16 id;
	u8 ctrl;

	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
					I2C_FUNC_SMBUS_WORD_DATA))
		return -ENODEV;

	/* Check device ID */
	id = i2c_smbus_read_word_data(new_client, LM73_REG_ID);
	ctrl = i2c_smbus_read_byte_data(new_client, LM73_REG_CTRL);
	if ((id != LM73_ID) || (ctrl & 0x10))
		return -ENODEV;

	strlcpy(info->type, "lm73", I2C_NAME_SIZE);

	return 0;
}

static struct i2c_driver lm73_driver = {
	.class		= I2C_CLASS_HWMON,
	.driver = {
		.name	= "lm73",
	},
	.probe		= lm73_probe,
	.remove		= lm73_remove,
	.id_table	= lm73_ids,
	.detect		= lm73_detect,
	.address_data	= &addr_data,
};

/* module glue */

static int __init sensors_lm73_init(void)
{
	return i2c_add_driver(&lm73_driver);
}

static void __exit sensors_lm73_exit(void)
{
	i2c_del_driver(&lm73_driver);
}

MODULE_AUTHOR("Guillaume Ligneul <guillaume.ligneul@gmail.com>");
MODULE_DESCRIPTION("LM73 driver");
MODULE_LICENSE("GPL");

module_init(sensors_lm73_init);
module_exit(sensors_lm73_exit);
Commit	Line	Data
4e233cbe AD	1	/*
	2	* LM73 Sensor driver
	3	* Based on LM75
	4	*
	5	* Copyright (C) 2007, CenoSYS (www.cenosys.com).
	6	* Copyright (C) 2009, Bollore telecom (www.bolloretelecom.eu).
	7	*
	8	* Guillaume Ligneul <guillaume.ligneul@gmail.com>
	9	* Adrien Demarez <adrien.demarez@bolloretelecom.eu>
	10	* Jeremy Laine <jeremy.laine@bolloretelecom.eu>
	11	*
	12	* This software program is licensed subject to the GNU General Public License
	13	* (GPL).Version 2,June 1991, available at
	14	* http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
	15	*/
	16
	17	#include <linux/module.h>
	18	#include <linux/init.h>
	19	#include <linux/slab.h>
	20	#include <linux/i2c.h>
	21	#include <linux/hwmon.h>
	22	#include <linux/hwmon-sysfs.h>
	23	#include <linux/err.h>
	24
	25
	26	/* Addresses scanned */
	27	static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4c,
	28	0x4d, 0x4e, I2C_CLIENT_END };
	29
	30	/* Insmod parameters */
	31	I2C_CLIENT_INSMOD_1(lm73);
	32
	33	/* LM73 registers */
	34	#define LM73_REG_INPUT 0x00
	35	#define LM73_REG_CONF 0x01
	36	#define LM73_REG_MAX 0x02
	37	#define LM73_REG_MIN 0x03
	38	#define LM73_REG_CTRL 0x04
	39	#define LM73_REG_ID 0x07
	40
	41	#define LM73_ID 0x9001 /* or 0x190 after a swab16() */
	42	#define DRVNAME "lm73"
	43	#define LM73_TEMP_MIN (-40)
	44	#define LM73_TEMP_MAX 150
	45
	46	/-----------------------------------------------------------------------/
	47
	48
	49	static ssize_t set_temp(struct device dev, struct device_attribute da,
	50	const char *buf, size_t count)
	51	{
	52	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
	53	struct i2c_client *client = to_i2c_client(dev);
	54	long temp;
	55	short value;
	56
	57	int status = strict_strtol(buf, 10, &temp);
	58	if (status < 0)
	59	return status;
	60
	61	/* Write value */
	62	value = (short) SENSORS_LIMIT(temp/250, (LM73_TEMP_MIN*4),
	63	(LM73_TEMP_MAX*4)) << 5;
	64	i2c_smbus_write_word_data(client, attr->index, swab16(value));
65	return count;
66	}
67
68	static ssize_t show_temp(struct device dev, struct device_attribute da,
69	char *buf)
70	{
71	struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
72	struct i2c_client *client = to_i2c_client(dev);
73	/* use integer division instead of equivalent right shift to
74	guarantee arithmetic shift and preserve the sign */
75	int temp = ((s16) (swab16(i2c_smbus_read_word_data(client,
76	attr->index)))*250) / 32;
77	return sprintf(buf, "%d\n", temp);
78	}
79
80
81	/-----------------------------------------------------------------------/
82
83	/* sysfs attributes for hwmon */
84
85	static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR \| S_IRUGO,
86	show_temp, set_temp, LM73_REG_MAX);
87	static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR \| S_IRUGO,
88	show_temp, set_temp, LM73_REG_MIN);
89	static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO,
90	show_temp, NULL, LM73_REG_INPUT);
91
92
93	static struct attribute *lm73_attributes[] = {
94	&sensor_dev_attr_temp1_input.dev_attr.attr,
95	&sensor_dev_attr_temp1_max.dev_attr.attr,
96	&sensor_dev_attr_temp1_min.dev_attr.attr,
97
98	NULL
99	};
100
101	static const struct attribute_group lm73_group = {
102	.attrs = lm73_attributes,
103	};
104
105	/-----------------------------------------------------------------------/
106
107	/* device probe and removal */
108
109	static int
110	lm73_probe(struct i2c_client client, const struct i2c_device_id id)
111	{
112	struct device *hwmon_dev;
113	int status;
114
115	/* Register sysfs hooks */
116	status = sysfs_create_group(&client->dev.kobj, &lm73_group);
117	if (status)
118	return status;
119
120	hwmon_dev = hwmon_device_register(&client->dev);
121	if (IS_ERR(hwmon_dev)) {
122	status = PTR_ERR(hwmon_dev);
123	goto exit_remove;
124	}
125	i2c_set_clientdata(client, hwmon_dev);
126
127	dev_info(&client->dev, "%s: sensor '%s'\n",
128	dev_name(hwmon_dev), client->name);
129
130	return 0;
131
132	exit_remove:
133	sysfs_remove_group(&client->dev.kobj, &lm73_group);
134	return status;
135	}
136
137	static int lm73_remove(struct i2c_client *client)
138	{
139	struct device *hwmon_dev = i2c_get_clientdata(client);
140
141	hwmon_device_unregister(hwmon_dev);
142	sysfs_remove_group(&client->dev.kobj, &lm73_group);
143	i2c_set_clientdata(client, NULL);
144	return 0;
145	}
146
147	static const struct i2c_device_id lm73_ids[] = {
148	{ "lm73", lm73 },
149	{ /* LIST END */ }
150	};
151	MODULE_DEVICE_TABLE(i2c, lm73_ids);
152
153	/* Return 0 if detection is successful, -ENODEV otherwise */
310ec792	154	static int lm73_detect(struct i2c_client *new_client,
4e233cbe AD	155	struct i2c_board_info *info)
	156	{
	157	struct i2c_adapter *adapter = new_client->adapter;
	158	u16 id;
	159	u8 ctrl;
	160
	161	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA \|
	162	I2C_FUNC_SMBUS_WORD_DATA))
	163	return -ENODEV;
	164
	165	/* Check device ID */
	166	id = i2c_smbus_read_word_data(new_client, LM73_REG_ID);
	167	ctrl = i2c_smbus_read_byte_data(new_client, LM73_REG_CTRL);
	168	if ((id != LM73_ID) \|\| (ctrl & 0x10))
	169	return -ENODEV;
	170
	171	strlcpy(info->type, "lm73", I2C_NAME_SIZE);
	172
	173	return 0;
	174	}
	175
	176	static struct i2c_driver lm73_driver = {
	177	.class = I2C_CLASS_HWMON,
	178	.driver = {
	179	.name = "lm73",
	180	},
	181	.probe = lm73_probe,
	182	.remove = lm73_remove,
	183	.id_table = lm73_ids,
	184	.detect = lm73_detect,
	185	.address_data = &addr_data,
	186	};
	187
	188	/* module glue */
	189
	190	static int __init sensors_lm73_init(void)
	191	{
	192	return i2c_add_driver(&lm73_driver);
	193	}
	194
	195	static void __exit sensors_lm73_exit(void)
	196	{
	197	i2c_del_driver(&lm73_driver);
	198	}
	199
	200	MODULE_AUTHOR("Guillaume Ligneul <guillaume.ligneul@gmail.com>");
	201	MODULE_DESCRIPTION("LM73 driver");
	202	MODULE_LICENSE("GPL");
	203
	204	module_init(sensors_lm73_init);
	205	module_exit(sensors_lm73_exit);