[net-next-2.6.git] / drivers / hwmon / Kconfig

#
# I2C Sensor chip drivers configuration
#

menu "Hardware Monitoring support"

config HWMON
	tristate "Hardware Monitoring support"
	default y
	help
	  Hardware monitoring devices let you monitor the hardware health
	  of a system. Most modern motherboards include such a device. It
	  can include temperature sensors, voltage sensors, fan speed
	  sensors and various additional features such as the ability to
	  control the speed of the fans.  If you want this support you
	  should say Y here and also to the specific driver(s) for your
	  sensors chip(s) below.

	  This support can also be built as a module.  If so, the module
	  will be called hwmon.

config SENSORS_ADM1021
	tristate "Analog Devices ADM1021 and compatibles"
	depends on HWMON && I2C
	select I2C_SENSOR
	help
	  If you say yes here you get support for Analog Devices ADM1021
	  and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
	  Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
	  and the XEON processor built-in sensor.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1021.

config SENSORS_ADM1025
	tristate "Analog Devices ADM1025 and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for Analog Devices ADM1025
	  and Philips NE1619 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1025.

config SENSORS_ADM1026
	tristate "Analog Devices ADM1026 and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for Analog Devices ADM1026
	  sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1026.

config SENSORS_ADM1031
	tristate "Analog Devices ADM1031 and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for Analog Devices ADM1031
	  and ADM1030 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1031.

config SENSORS_ADM9240
	tristate "Analog Devices ADM9240 and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for Analog Devices ADM9240,
	  Dallas DS1780, National Semiconductor LM81 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm9240.

config SENSORS_ASB100
	tristate "Asus ASB100 Bach"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for the ASB100 Bach sensor
	  chip found on some Asus mainboards.

	  This driver can also be built as a module.  If so, the module
	  will be called asb100.

config SENSORS_ATXP1
	tristate "Attansic ATXP1 VID controller"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for the Attansic ATXP1 VID
	  controller.

	  If your board have such a chip, you are able to control your CPU
	  core and other voltages.

	  This driver can also be built as a module.  If so, the module
	  will be called atxp1.

config SENSORS_DS1621
	tristate "Dallas Semiconductor DS1621 and DS1625"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for Dallas Semiconductor
	  DS1621 and DS1625 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called ds1621.

config SENSORS_FSCHER
	tristate "FSC Hermes"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for Fujitsu Siemens
	  Computers Hermes sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called fscher.

config SENSORS_FSCPOS
	tristate "FSC Poseidon"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for Fujitsu Siemens
	  Computers Poseidon sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called fscpos.

config SENSORS_GL518SM
	tristate "Genesys Logic GL518SM"
	depends on HWMON && I2C
	select I2C_SENSOR
	help
	  If you say yes here you get support for Genesys Logic GL518SM
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called gl518sm.

config SENSORS_GL520SM
	tristate "Genesys Logic GL520SM"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for Genesys Logic GL520SM
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called gl520sm.

config SENSORS_IT87
	tristate "ITE IT87xx and compatibles"
	depends on HWMON && I2C
	select I2C_SENSOR
	select I2C_ISA
	help
	  If you say yes here you get support for ITE IT87xx sensor chips
	  and clones: SiS960.

	  This driver can also be built as a module.  If so, the module
	  will be called it87.

config SENSORS_LM63
	tristate "National Semiconductor LM63"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for the National Semiconductor
	  LM63 remote diode digital temperature sensor with integrated fan
	  control.  Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
	  motherboard, among others.

	  This driver can also be built as a module.  If so, the module
	  will be called lm63.

config SENSORS_LM75
	tristate "National Semiconductor LM75 and compatibles"
	depends on HWMON && I2C
	select I2C_SENSOR
	help
	  If you say yes here you get support for National Semiconductor LM75
	  sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
	  9-bit precision mode), and TelCom (now Microchip) TCN75.

	  The DS75 and DS1775 in 10- to 12-bit precision modes will require
	  a force module parameter. The driver will not handle the extra
	  precision anyhow.

	  This driver can also be built as a module.  If so, the module
	  will be called lm75.

config SENSORS_LM77
	tristate "National Semiconductor LM77"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for National Semiconductor LM77
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm77.

config SENSORS_LM78
	tristate "National Semiconductor LM78 and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	select I2C_ISA
	help
	  If you say yes here you get support for National Semiconductor LM78,
	  LM78-J and LM79.

	  This driver can also be built as a module.  If so, the module
	  will be called lm78.

config SENSORS_LM80
	tristate "National Semiconductor LM80"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for National Semiconductor
	  LM80 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm80.

config SENSORS_LM83
	tristate "National Semiconductor LM83"
	depends on HWMON && I2C
	select I2C_SENSOR
	help
	  If you say yes here you get support for National Semiconductor
	  LM83 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm83.

config SENSORS_LM85
	tristate "National Semiconductor LM85 and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for National Semiconductor LM85
	  sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.

	  This driver can also be built as a module.  If so, the module
	  will be called lm85.

config SENSORS_LM87
	tristate "National Semiconductor LM87"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for National Semiconductor LM87
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm87.

config SENSORS_LM90
	tristate "National Semiconductor LM90 and compatibles"
	depends on HWMON && I2C
	select I2C_SENSOR
	help
	  If you say yes here you get support for National Semiconductor LM90,
	  LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
	  MAX6658 sensor chips.

	  The Analog Devices ADT7461 sensor chip is also supported, but only
	  if found in ADM1032 compatibility mode.

	  This driver can also be built as a module.  If so, the module
	  will be called lm90.

config SENSORS_LM92
	tristate "National Semiconductor LM92 and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for National Semiconductor LM92
	  and Maxim MAX6635 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm92.

config SENSORS_MAX1619
	tristate "Maxim MAX1619 sensor chip"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for MAX1619 sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called max1619.

config SENSORS_PC87360
	tristate "National Semiconductor PC87360 family"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	select I2C_ISA
	help
	  If you say yes here you get access to the hardware monitoring
	  functions of the National Semiconductor PC8736x Super-I/O chips.
	  The PC87360, PC87363 and PC87364 only have fan monitoring and
	  control.  The PC87365 and PC87366 additionally have voltage and
	  temperature monitoring.

	  This driver can also be built as a module.  If so, the module
	  will be called pc87360.

config SENSORS_SIS5595
	tristate "Silicon Integrated Systems Corp. SiS5595"
	depends on HWMON && I2C && PCI && EXPERIMENTAL
	select I2C_SENSOR
	select I2C_ISA
	help
	  If you say yes here you get support for the integrated sensors in
	  SiS5595 South Bridges.

	  This driver can also be built as a module.  If so, the module
	  will be called sis5595.

config SENSORS_SMSC47M1
	tristate "SMSC LPC47M10x and compatibles"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	select I2C_ISA
	help
	  If you say yes here you get support for the integrated fan
	  monitoring and control capabilities of the SMSC LPC47B27x,
	  LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips.

	  This driver can also be built as a module.  If so, the module
	  will be called smsc47m1.

config SENSORS_SMSC47B397
	tristate "SMSC LPC47B397-NC"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	select I2C_ISA
	help
	  If you say yes here you get support for the SMSC LPC47B397-NC
	  sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called smsc47b397.

config SENSORS_VIA686A
	tristate "VIA686A"
	depends on HWMON && I2C && PCI
	select I2C_SENSOR
	select I2C_ISA
	help
	  If you say yes here you get support for the integrated sensors in
	  Via 686A/B South Bridges.

	  This driver can also be built as a module.  If so, the module
	  will be called via686a.

config SENSORS_W83781D
	tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
	depends on HWMON && I2C
	select I2C_SENSOR
	select I2C_ISA
	help
	  If you say yes here you get support for the Winbond W8378x series
	  of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
	  and the similar Asus AS99127F.

	  This driver can also be built as a module.  If so, the module
	  will be called w83781d.

config SENSORS_W83L785TS
	tristate "Winbond W83L785TS-S"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	help
	  If you say yes here you get support for the Winbond W83L785TS-S
	  sensor chip, which is used on the Asus A7N8X, among other
	  motherboards.

	  This driver can also be built as a module.  If so, the module
	  will be called w83l785ts.

config SENSORS_W83627HF
	tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	select I2C_ISA
	help
	  If you say yes here you get support for the Winbond W836X7 series
	  of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF

	  This driver can also be built as a module.  If so, the module
	  will be called w83627hf.

config SENSORS_W83627EHF
	tristate "Winbond W83627EHF"
	depends on HWMON && I2C && EXPERIMENTAL
	select I2C_SENSOR
	select I2C_ISA
	help
	  If you say yes here you get preliminary support for the hardware
	  monitoring functionality of the Winbond W83627EHF Super-I/O chip.
	  Only fan and temperature inputs are supported at the moment, while
	  the chip does much more than that.

	  This driver also supports the W83627EHG, which is the lead-free
	  version of the W83627EHF.

	  This driver can also be built as a module.  If so, the module
	  will be called w83627ehf.

config HWMON_DEBUG_CHIP
	bool "Hardware Monitoring Chip debugging messages"
	depends on HWMON
	default n
	help
	  Say Y here if you want the I2C chip drivers to produce a bunch of
	  debug messages to the system log.  Select this if you are having
	  a problem with I2C support and want to see more of what is going
	  on.

endmenu
Commit	Line	Data
ad2f931d JD	1	#
	2	# I2C Sensor chip drivers configuration
	3	#
	4
	5	menu "Hardware Monitoring support"
	6
	7	config HWMON
	8	tristate "Hardware Monitoring support"
	9	default y
	10	help
	11	Hardware monitoring devices let you monitor the hardware health
	12	of a system. Most modern motherboards include such a device. It
	13	can include temperature sensors, voltage sensors, fan speed
	14	sensors and various additional features such as the ability to
1236441f MH	15	control the speed of the fans. If you want this support you
	16	should say Y here and also to the specific driver(s) for your
	17	sensors chip(s) below.
	18
	19	This support can also be built as a module. If so, the module
	20	will be called hwmon.
ad2f931d JD	21
	22	config SENSORS_ADM1021
	23	tristate "Analog Devices ADM1021 and compatibles"
	24	depends on HWMON && I2C
	25	select I2C_SENSOR
	26	help
	27	If you say yes here you get support for Analog Devices ADM1021
	28	and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
	29	Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
	30	and the XEON processor built-in sensor.
	31
	32	This driver can also be built as a module. If so, the module
	33	will be called adm1021.
	34
	35	config SENSORS_ADM1025
	36	tristate "Analog Devices ADM1025 and compatibles"
	37	depends on HWMON && I2C && EXPERIMENTAL
	38	select I2C_SENSOR
	39	help
	40	If you say yes here you get support for Analog Devices ADM1025
	41	and Philips NE1619 sensor chips.
	42
	43	This driver can also be built as a module. If so, the module
	44	will be called adm1025.
	45
	46	config SENSORS_ADM1026
	47	tristate "Analog Devices ADM1026 and compatibles"
	48	depends on HWMON && I2C && EXPERIMENTAL
	49	select I2C_SENSOR
	50	help
	51	If you say yes here you get support for Analog Devices ADM1026
	52	sensor chip.
	53
	54	This driver can also be built as a module. If so, the module
	55	will be called adm1026.
	56
	57	config SENSORS_ADM1031
	58	tristate "Analog Devices ADM1031 and compatibles"
	59	depends on HWMON && I2C && EXPERIMENTAL
	60	select I2C_SENSOR
	61	help
	62	If you say yes here you get support for Analog Devices ADM1031
	63	and ADM1030 sensor chips.
	64
	65	This driver can also be built as a module. If so, the module
	66	will be called adm1031.
	67
	68	config SENSORS_ADM9240
	69	tristate "Analog Devices ADM9240 and compatibles"
	70	depends on HWMON && I2C && EXPERIMENTAL
	71	select I2C_SENSOR
	72	help
	73	If you say yes here you get support for Analog Devices ADM9240,
	74	Dallas DS1780, National Semiconductor LM81 sensor chips.
	75
	76	This driver can also be built as a module. If so, the module
	77	will be called adm9240.
	78
	79	config SENSORS_ASB100
	80	tristate "Asus ASB100 Bach"
	81	depends on HWMON && I2C && EXPERIMENTAL
	82	select I2C_SENSOR
	83	help
	84	If you say yes here you get support for the ASB100 Bach sensor
85	chip found on some Asus mainboards.
86
87	This driver can also be built as a module. If so, the module
88	will be called asb100.
89
90	config SENSORS_ATXP1
91	tristate "Attansic ATXP1 VID controller"
92	depends on HWMON && I2C && EXPERIMENTAL
93	select I2C_SENSOR
94	help
95	If you say yes here you get support for the Attansic ATXP1 VID
96	controller.
97
98	If your board have such a chip, you are able to control your CPU
99	core and other voltages.
100
101	This driver can also be built as a module. If so, the module
102	will be called atxp1.
103
104	config SENSORS_DS1621
105	tristate "Dallas Semiconductor DS1621 and DS1625"
106	depends on HWMON && I2C && EXPERIMENTAL
107	select I2C_SENSOR
108	help
109	If you say yes here you get support for Dallas Semiconductor
110	DS1621 and DS1625 sensor chips.
111
112	This driver can also be built as a module. If so, the module
113	will be called ds1621.
114
115	config SENSORS_FSCHER
116	tristate "FSC Hermes"
117	depends on HWMON && I2C && EXPERIMENTAL
118	select I2C_SENSOR
119	help
120	If you say yes here you get support for Fujitsu Siemens
121	Computers Hermes sensor chips.
122
123	This driver can also be built as a module. If so, the module
124	will be called fscher.
125
126	config SENSORS_FSCPOS
127	tristate "FSC Poseidon"
128	depends on HWMON && I2C && EXPERIMENTAL
129	select I2C_SENSOR
130	help
131	If you say yes here you get support for Fujitsu Siemens
132	Computers Poseidon sensor chips.
133
134	This driver can also be built as a module. If so, the module
135	will be called fscpos.
136
137	config SENSORS_GL518SM
138	tristate "Genesys Logic GL518SM"
139	depends on HWMON && I2C
140	select I2C_SENSOR
141	help
142	If you say yes here you get support for Genesys Logic GL518SM
143	sensor chips.
144
145	This driver can also be built as a module. If so, the module
146	will be called gl518sm.
147
148	config SENSORS_GL520SM
149	tristate "Genesys Logic GL520SM"
150	depends on HWMON && I2C && EXPERIMENTAL
151	select I2C_SENSOR
152	help
153	If you say yes here you get support for Genesys Logic GL520SM
154	sensor chips.
155
156	This driver can also be built as a module. If so, the module
157	will be called gl520sm.
158
159	config SENSORS_IT87
160	tristate "ITE IT87xx and compatibles"
161	depends on HWMON && I2C
162	select I2C_SENSOR
5042c7d7	163	select I2C_ISA
ad2f931d JD	164	help
	165	If you say yes here you get support for ITE IT87xx sensor chips
	166	and clones: SiS960.
	167
	168	This driver can also be built as a module. If so, the module
	169	will be called it87.
	170
	171	config SENSORS_LM63
	172	tristate "National Semiconductor LM63"
	173	depends on HWMON && I2C && EXPERIMENTAL
	174	select I2C_SENSOR
	175	help
	176	If you say yes here you get support for the National Semiconductor
	177	LM63 remote diode digital temperature sensor with integrated fan
	178	control. Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
	179	motherboard, among others.
	180
	181	This driver can also be built as a module. If so, the module
	182	will be called lm63.
	183
	184	config SENSORS_LM75
	185	tristate "National Semiconductor LM75 and compatibles"
	186	depends on HWMON && I2C
	187	select I2C_SENSOR
	188	help
	189	If you say yes here you get support for National Semiconductor LM75
	190	sensor chips and clones: Dallas Semiconductor DS75 and DS1775 (in
	191	9-bit precision mode), and TelCom (now Microchip) TCN75.
	192
	193	The DS75 and DS1775 in 10- to 12-bit precision modes will require
	194	a force module parameter. The driver will not handle the extra
	195	precision anyhow.
	196
	197	This driver can also be built as a module. If so, the module
	198	will be called lm75.
	199
	200	config SENSORS_LM77
	201	tristate "National Semiconductor LM77"
	202	depends on HWMON && I2C && EXPERIMENTAL
	203	select I2C_SENSOR
	204	help
	205	If you say yes here you get support for National Semiconductor LM77
	206	sensor chips.
	207
	208	This driver can also be built as a module. If so, the module
	209	will be called lm77.
	210
	211	config SENSORS_LM78
	212	tristate "National Semiconductor LM78 and compatibles"
	213	depends on HWMON && I2C && EXPERIMENTAL
	214	select I2C_SENSOR
5042c7d7	215	select I2C_ISA
ad2f931d JD	216	help
	217	If you say yes here you get support for National Semiconductor LM78,
	218	LM78-J and LM79.
	219
	220	This driver can also be built as a module. If so, the module
	221	will be called lm78.
	222
	223	config SENSORS_LM80
	224	tristate "National Semiconductor LM80"
	225	depends on HWMON && I2C && EXPERIMENTAL
	226	select I2C_SENSOR
	227	help
	228	If you say yes here you get support for National Semiconductor
	229	LM80 sensor chips.
	230
	231	This driver can also be built as a module. If so, the module
	232	will be called lm80.
	233
	234	config SENSORS_LM83
	235	tristate "National Semiconductor LM83"
	236	depends on HWMON && I2C
	237	select I2C_SENSOR
	238	help
	239	If you say yes here you get support for National Semiconductor
	240	LM83 sensor chips.
	241
	242	This driver can also be built as a module. If so, the module
	243	will be called lm83.
	244
	245	config SENSORS_LM85
	246	tristate "National Semiconductor LM85 and compatibles"
	247	depends on HWMON && I2C && EXPERIMENTAL
	248	select I2C_SENSOR
	249	help
	250	If you say yes here you get support for National Semiconductor LM85
	251	sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.
	252
	253	This driver can also be built as a module. If so, the module
	254	will be called lm85.
	255
	256	config SENSORS_LM87
	257	tristate "National Semiconductor LM87"
	258	depends on HWMON && I2C && EXPERIMENTAL
	259	select I2C_SENSOR
	260	help
	261	If you say yes here you get support for National Semiconductor LM87
	262	sensor chips.
	263
	264	This driver can also be built as a module. If so, the module
	265	will be called lm87.
	266
	267	config SENSORS_LM90
	268	tristate "National Semiconductor LM90 and compatibles"
	269	depends on HWMON && I2C
	270	select I2C_SENSOR
	271	help
	272	If you say yes here you get support for National Semiconductor LM90,
	273	LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657 and
	274	MAX6658 sensor chips.
	275
	276	The Analog Devices ADT7461 sensor chip is also supported, but only
	277	if found in ADM1032 compatibility mode.
	278
	279	This driver can also be built as a module. If so, the module
280	will be called lm90.
281
282	config SENSORS_LM92
283	tristate "National Semiconductor LM92 and compatibles"
284	depends on HWMON && I2C && EXPERIMENTAL
285	select I2C_SENSOR
286	help
287	If you say yes here you get support for National Semiconductor LM92
288	and Maxim MAX6635 sensor chips.
289
290	This driver can also be built as a module. If so, the module
291	will be called lm92.
292
293	config SENSORS_MAX1619
294	tristate "Maxim MAX1619 sensor chip"
295	depends on HWMON && I2C && EXPERIMENTAL
296	select I2C_SENSOR
297	help
298	If you say yes here you get support for MAX1619 sensor chip.
299
300	This driver can also be built as a module. If so, the module
301	will be called max1619.
302
303	config SENSORS_PC87360
304	tristate "National Semiconductor PC87360 family"
305	depends on HWMON && I2C && EXPERIMENTAL
306	select I2C_SENSOR
307	select I2C_ISA
308	help
309	If you say yes here you get access to the hardware monitoring
310	functions of the National Semiconductor PC8736x Super-I/O chips.
311	The PC87360, PC87363 and PC87364 only have fan monitoring and
312	control. The PC87365 and PC87366 additionally have voltage and
313	temperature monitoring.
314
315	This driver can also be built as a module. If so, the module
316	will be called pc87360.
317
318	config SENSORS_SIS5595
319	tristate "Silicon Integrated Systems Corp. SiS5595"
320	depends on HWMON && I2C && PCI && EXPERIMENTAL
321	select I2C_SENSOR
322	select I2C_ISA
323	help
324	If you say yes here you get support for the integrated sensors in
325	SiS5595 South Bridges.
326
327	This driver can also be built as a module. If so, the module
328	will be called sis5595.
329
330	config SENSORS_SMSC47M1
331	tristate "SMSC LPC47M10x and compatibles"
332	depends on HWMON && I2C && EXPERIMENTAL
333	select I2C_SENSOR
334	select I2C_ISA
335	help
336	If you say yes here you get support for the integrated fan
337	monitoring and control capabilities of the SMSC LPC47B27x,
338	LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192 chips.
339
340	This driver can also be built as a module. If so, the module
341	will be called smsc47m1.
342
343	config SENSORS_SMSC47B397
344	tristate "SMSC LPC47B397-NC"
345	depends on HWMON && I2C && EXPERIMENTAL
346	select I2C_SENSOR
347	select I2C_ISA
348	help
349	If you say yes here you get support for the SMSC LPC47B397-NC
350	sensor chip.
351
352	This driver can also be built as a module. If so, the module
353	will be called smsc47b397.
354
355	config SENSORS_VIA686A
356	tristate "VIA686A"
357	depends on HWMON && I2C && PCI
358	select I2C_SENSOR
359	select I2C_ISA
360	help
361	If you say yes here you get support for the integrated sensors in
362	Via 686A/B South Bridges.
363
364	This driver can also be built as a module. If so, the module
365	will be called via686a.
366
367	config SENSORS_W83781D
368	tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F"
369	depends on HWMON && I2C
370	select I2C_SENSOR
5042c7d7	371	select I2C_ISA
ad2f931d JD	372	help
	373	If you say yes here you get support for the Winbond W8378x series
	374	of sensor chips: the W83781D, W83782D, W83783S and W83627HF,
	375	and the similar Asus AS99127F.
	376
	377	This driver can also be built as a module. If so, the module
	378	will be called w83781d.
	379
	380	config SENSORS_W83L785TS
	381	tristate "Winbond W83L785TS-S"
	382	depends on HWMON && I2C && EXPERIMENTAL
	383	select I2C_SENSOR
	384	help
	385	If you say yes here you get support for the Winbond W83L785TS-S
	386	sensor chip, which is used on the Asus A7N8X, among other
	387	motherboards.
	388
	389	This driver can also be built as a module. If so, the module
	390	will be called w83l785ts.
	391
	392	config SENSORS_W83627HF
	393	tristate "Winbond W83627HF, W83627THF, W83637HF, W83697HF"
	394	depends on HWMON && I2C && EXPERIMENTAL
	395	select I2C_SENSOR
	396	select I2C_ISA
	397	help
	398	If you say yes here you get support for the Winbond W836X7 series
	399	of sensor chips: the W83627HF, W83627THF, W83637HF, and the W83697HF
	400
	401	This driver can also be built as a module. If so, the module
	402	will be called w83627hf.
	403
	404	config SENSORS_W83627EHF
	405	tristate "Winbond W83627EHF"
	406	depends on HWMON && I2C && EXPERIMENTAL
	407	select I2C_SENSOR
	408	select I2C_ISA
	409	help
	410	If you say yes here you get preliminary support for the hardware
	411	monitoring functionality of the Winbond W83627EHF Super-I/O chip.
	412	Only fan and temperature inputs are supported at the moment, while
	413	the chip does much more than that.
	414
8dd2d2ca JD	415	This driver also supports the W83627EHG, which is the lead-free
	416	version of the W83627EHF.
	417
ad2f931d JD	418	This driver can also be built as a module. If so, the module
	419	will be called w83627ehf.
	420
	421	config HWMON_DEBUG_CHIP
	422	bool "Hardware Monitoring Chip debugging messages"
	423	depends on HWMON
	424	default n
	425	help
	426	Say Y here if you want the I2C chip drivers to produce a bunch of
	427	debug messages to the system log. Select this if you are having
	428	a problem with I2C support and want to see more of what is going
	429	on.
	430
	431	endmenu