]>
Commit | Line | Data |
---|---|---|
025621f9 AC |
1 | /* |
2 | * ACPI PATA driver | |
3 | * | |
ab771630 | 4 | * (c) 2007 Red Hat |
025621f9 AC |
5 | */ |
6 | ||
7 | #include <linux/kernel.h> | |
8 | #include <linux/module.h> | |
9 | #include <linux/pci.h> | |
10 | #include <linux/init.h> | |
11 | #include <linux/blkdev.h> | |
12 | #include <linux/delay.h> | |
13 | #include <linux/device.h> | |
14 | #include <scsi/scsi_host.h> | |
15 | #include <acpi/acpi_bus.h> | |
025621f9 AC |
16 | |
17 | #include <linux/libata.h> | |
18 | #include <linux/ata.h> | |
19 | ||
20 | #define DRV_NAME "pata_acpi" | |
21 | #define DRV_VERSION "0.2.3" | |
22 | ||
23 | struct pata_acpi { | |
24 | struct ata_acpi_gtm gtm; | |
25 | void *last; | |
26 | unsigned long mask[2]; | |
27 | }; | |
28 | ||
29 | /** | |
30 | * pacpi_pre_reset - check for 40/80 pin | |
31 | * @ap: Port | |
32 | * @deadline: deadline jiffies for the operation | |
33 | * | |
34 | * Perform the PATA port setup we need. | |
35 | */ | |
36 | ||
37 | static int pacpi_pre_reset(struct ata_link *link, unsigned long deadline) | |
38 | { | |
39 | struct ata_port *ap = link->ap; | |
40 | struct pata_acpi *acpi = ap->private_data; | |
41 | if (ap->acpi_handle == NULL || ata_acpi_gtm(ap, &acpi->gtm) < 0) | |
42 | return -ENODEV; | |
43 | ||
9363c382 | 44 | return ata_sff_prereset(link, deadline); |
025621f9 AC |
45 | } |
46 | ||
47 | /** | |
48 | * pacpi_cable_detect - cable type detection | |
49 | * @ap: port to detect | |
50 | * | |
51 | * Perform device specific cable detection | |
52 | */ | |
53 | ||
54 | static int pacpi_cable_detect(struct ata_port *ap) | |
55 | { | |
56 | struct pata_acpi *acpi = ap->private_data; | |
57 | ||
58 | if ((acpi->mask[0] | acpi->mask[1]) & (0xF8 << ATA_SHIFT_UDMA)) | |
59 | return ATA_CBL_PATA80; | |
60 | else | |
61 | return ATA_CBL_PATA40; | |
62 | } | |
63 | ||
025621f9 AC |
64 | /** |
65 | * pacpi_discover_modes - filter non ACPI modes | |
66 | * @adev: ATA device | |
67 | * @mask: proposed modes | |
68 | * | |
69 | * Try the modes available and see which ones the ACPI method will | |
70 | * set up sensibly. From this we get a mask of ACPI modes we can use | |
71 | */ | |
72 | ||
73 | static unsigned long pacpi_discover_modes(struct ata_port *ap, struct ata_device *adev) | |
74 | { | |
025621f9 | 75 | struct pata_acpi *acpi = ap->private_data; |
025621f9 | 76 | struct ata_acpi_gtm probe; |
7c77fa4d | 77 | unsigned int xfer_mask; |
025621f9 AC |
78 | |
79 | probe = acpi->gtm; | |
80 | ||
025621f9 AC |
81 | ata_acpi_gtm(ap, &probe); |
82 | ||
7c77fa4d | 83 | xfer_mask = ata_acpi_gtm_xfermask(adev, &probe); |
025621f9 | 84 | |
7c77fa4d | 85 | if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA)) |
025621f9 | 86 | ap->cbl = ATA_CBL_PATA80; |
7c77fa4d TH |
87 | |
88 | return xfer_mask; | |
025621f9 AC |
89 | } |
90 | ||
91 | /** | |
92 | * pacpi_mode_filter - mode filter for ACPI | |
93 | * @adev: device | |
94 | * @mask: mask of valid modes | |
95 | * | |
96 | * Filter the valid mode list according to our own specific rules, in | |
97 | * this case the list of discovered valid modes obtained by ACPI probing | |
98 | */ | |
99 | ||
100 | static unsigned long pacpi_mode_filter(struct ata_device *adev, unsigned long mask) | |
101 | { | |
102 | struct pata_acpi *acpi = adev->link->ap->private_data; | |
9363c382 | 103 | return ata_bmdma_mode_filter(adev, mask & acpi->mask[adev->devno]); |
025621f9 AC |
104 | } |
105 | ||
106 | /** | |
107 | * pacpi_set_piomode - set initial PIO mode data | |
108 | * @ap: ATA interface | |
109 | * @adev: ATA device | |
110 | */ | |
111 | ||
112 | static void pacpi_set_piomode(struct ata_port *ap, struct ata_device *adev) | |
113 | { | |
114 | int unit = adev->devno; | |
115 | struct pata_acpi *acpi = ap->private_data; | |
a0f79b92 | 116 | const struct ata_timing *t; |
025621f9 | 117 | |
b447916e | 118 | if (!(acpi->gtm.flags & 0x10)) |
025621f9 AC |
119 | unit = 0; |
120 | ||
121 | /* Now stuff the nS values into the structure */ | |
a0f79b92 TH |
122 | t = ata_timing_find_mode(adev->pio_mode); |
123 | acpi->gtm.drive[unit].pio = t->cycle; | |
025621f9 AC |
124 | ata_acpi_stm(ap, &acpi->gtm); |
125 | /* See what mode we actually got */ | |
126 | ata_acpi_gtm(ap, &acpi->gtm); | |
127 | } | |
128 | ||
129 | /** | |
130 | * pacpi_set_dmamode - set initial DMA mode data | |
131 | * @ap: ATA interface | |
132 | * @adev: ATA device | |
133 | */ | |
134 | ||
135 | static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev) | |
136 | { | |
137 | int unit = adev->devno; | |
138 | struct pata_acpi *acpi = ap->private_data; | |
a0f79b92 | 139 | const struct ata_timing *t; |
025621f9 | 140 | |
b447916e | 141 | if (!(acpi->gtm.flags & 0x10)) |
025621f9 AC |
142 | unit = 0; |
143 | ||
144 | /* Now stuff the nS values into the structure */ | |
a0f79b92 | 145 | t = ata_timing_find_mode(adev->dma_mode); |
025621f9 | 146 | if (adev->dma_mode >= XFER_UDMA_0) { |
a0f79b92 | 147 | acpi->gtm.drive[unit].dma = t->udma; |
025621f9 AC |
148 | acpi->gtm.flags |= (1 << (2 * unit)); |
149 | } else { | |
a0f79b92 | 150 | acpi->gtm.drive[unit].dma = t->cycle; |
025621f9 AC |
151 | acpi->gtm.flags &= ~(1 << (2 * unit)); |
152 | } | |
153 | ata_acpi_stm(ap, &acpi->gtm); | |
154 | /* See what mode we actually got */ | |
155 | ata_acpi_gtm(ap, &acpi->gtm); | |
156 | } | |
157 | ||
158 | /** | |
9363c382 | 159 | * pacpi_qc_issue - command issue |
025621f9 AC |
160 | * @qc: command pending |
161 | * | |
162 | * Called when the libata layer is about to issue a command. We wrap | |
163 | * this interface so that we can load the correct ATA timings if | |
164 | * neccessary. | |
165 | */ | |
166 | ||
9363c382 | 167 | static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc) |
025621f9 AC |
168 | { |
169 | struct ata_port *ap = qc->ap; | |
170 | struct ata_device *adev = qc->dev; | |
171 | struct pata_acpi *acpi = ap->private_data; | |
172 | ||
173 | if (acpi->gtm.flags & 0x10) | |
9363c382 | 174 | return ata_sff_qc_issue(qc); |
025621f9 AC |
175 | |
176 | if (adev != acpi->last) { | |
177 | pacpi_set_piomode(ap, adev); | |
b15b3eba | 178 | if (ata_dma_enabled(adev)) |
025621f9 AC |
179 | pacpi_set_dmamode(ap, adev); |
180 | acpi->last = adev; | |
181 | } | |
9363c382 | 182 | return ata_sff_qc_issue(qc); |
025621f9 AC |
183 | } |
184 | ||
185 | /** | |
186 | * pacpi_port_start - port setup | |
187 | * @ap: ATA port being set up | |
188 | * | |
189 | * Use the port_start hook to maintain private control structures | |
190 | */ | |
191 | ||
192 | static int pacpi_port_start(struct ata_port *ap) | |
193 | { | |
194 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | |
195 | struct pata_acpi *acpi; | |
196 | ||
197 | int ret; | |
198 | ||
199 | if (ap->acpi_handle == NULL) | |
200 | return -ENODEV; | |
201 | ||
202 | acpi = ap->private_data = devm_kzalloc(&pdev->dev, sizeof(struct pata_acpi), GFP_KERNEL); | |
203 | if (ap->private_data == NULL) | |
204 | return -ENOMEM; | |
205 | acpi->mask[0] = pacpi_discover_modes(ap, &ap->link.device[0]); | |
206 | acpi->mask[1] = pacpi_discover_modes(ap, &ap->link.device[1]); | |
207 | ret = ata_sff_port_start(ap); | |
208 | if (ret < 0) | |
209 | return ret; | |
210 | ||
211 | return ret; | |
212 | } | |
213 | ||
214 | static struct scsi_host_template pacpi_sht = { | |
68d1d07b | 215 | ATA_BMDMA_SHT(DRV_NAME), |
025621f9 AC |
216 | }; |
217 | ||
029cfd6b TH |
218 | static struct ata_port_operations pacpi_ops = { |
219 | .inherits = &ata_bmdma_port_ops, | |
9363c382 | 220 | .qc_issue = pacpi_qc_issue, |
029cfd6b TH |
221 | .cable_detect = pacpi_cable_detect, |
222 | .mode_filter = pacpi_mode_filter, | |
025621f9 AC |
223 | .set_piomode = pacpi_set_piomode, |
224 | .set_dmamode = pacpi_set_dmamode, | |
887125e3 | 225 | .prereset = pacpi_pre_reset, |
025621f9 AC |
226 | .port_start = pacpi_port_start, |
227 | }; | |
228 | ||
229 | ||
230 | /** | |
231 | * pacpi_init_one - Register ACPI ATA PCI device with kernel services | |
232 | * @pdev: PCI device to register | |
233 | * @ent: Entry in pacpi_pci_tbl matching with @pdev | |
234 | * | |
235 | * Called from kernel PCI layer. | |
236 | * | |
237 | * LOCKING: | |
238 | * Inherited from PCI layer (may sleep). | |
239 | * | |
240 | * RETURNS: | |
241 | * Zero on success, or -ERRNO value. | |
242 | */ | |
243 | ||
244 | static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id) | |
245 | { | |
246 | static const struct ata_port_info info = { | |
025621f9 AC |
247 | .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, |
248 | ||
249 | .pio_mask = 0x1f, | |
250 | .mwdma_mask = 0x07, | |
251 | .udma_mask = 0x7f, | |
252 | ||
253 | .port_ops = &pacpi_ops, | |
254 | }; | |
255 | const struct ata_port_info *ppi[] = { &info, NULL }; | |
05177f17 AC |
256 | if (pdev->vendor == PCI_VENDOR_ID_ATI) { |
257 | int rc = pcim_enable_device(pdev); | |
258 | if (rc < 0) | |
259 | return rc; | |
260 | pcim_pin_device(pdev); | |
261 | } | |
9363c382 | 262 | return ata_pci_sff_init_one(pdev, ppi, &pacpi_sht, NULL); |
025621f9 AC |
263 | } |
264 | ||
265 | static const struct pci_device_id pacpi_pci_tbl[] = { | |
266 | { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1}, | |
267 | { } /* terminate list */ | |
268 | }; | |
269 | ||
270 | static struct pci_driver pacpi_pci_driver = { | |
271 | .name = DRV_NAME, | |
272 | .id_table = pacpi_pci_tbl, | |
273 | .probe = pacpi_init_one, | |
274 | .remove = ata_pci_remove_one, | |
8e2840e0 | 275 | #ifdef CONFIG_PM |
025621f9 AC |
276 | .suspend = ata_pci_device_suspend, |
277 | .resume = ata_pci_device_resume, | |
8e2840e0 | 278 | #endif |
025621f9 AC |
279 | }; |
280 | ||
281 | static int __init pacpi_init(void) | |
282 | { | |
283 | return pci_register_driver(&pacpi_pci_driver); | |
284 | } | |
285 | ||
286 | static void __exit pacpi_exit(void) | |
287 | { | |
288 | pci_unregister_driver(&pacpi_pci_driver); | |
289 | } | |
290 | ||
291 | module_init(pacpi_init); | |
292 | module_exit(pacpi_exit); | |
293 | ||
294 | MODULE_AUTHOR("Alan Cox"); | |
295 | MODULE_DESCRIPTION("SCSI low-level driver for ATA in ACPI mode"); | |
296 | MODULE_LICENSE("GPL"); | |
297 | MODULE_DEVICE_TABLE(pci, pacpi_pci_tbl); | |
298 | MODULE_VERSION(DRV_VERSION); | |
299 |