git://bbs.cooldavid.org / net-next-2.6.git / blame
| Commit | Line | Data |
|---|---|---|
| 4705b2e8 MD |
1 | #ifdef __ASSEMBLY__ |
| 2 | ||
| be4ebf99 KM |
3 | /* EcoVec board specific boot code: |
| 4 | * converts the "partner-jet-script.txt" script into assembly | |
| 5 | * the assembly code is the first code to be executed in the romImage | |
| 6 | */ | |
| 7 | ||
| 8 | #include <asm/romimage-macros.h> | |
| 9 | #include "partner-jet-setup.txt" | |
| 10 | ||
| 11 | /* execute icbi after enabling cache */ | |
| 12 | mov.l 1f, r0 | |
| 13 | icbi @r0 | |
| 14 | ||
| 15 | /* jump to cached area */ | |
| 16 | mova 2f, r0 | |
| 17 | jmp @r0 | |
| 18 | nop | |
| 19 | ||
| 20 | .align 2 | |
| 21 | 1 : .long 0xa8000000 | |
| 22 | 2 : | |
| 4705b2e8 MD |
23 | |
| 24 | #else /* __ASSEMBLY__ */ | |
| 25 | ||
| 26 | /* Ecovec board specific information: | |
| 27 | * | |
| 28 | * Set the following to enable MMCIF boot from the MMC card in CN12: | |
| 29 | * | |
| 30 | * DS1.5 = OFF (SH BOOT pin set to L) | |
| 31 | * DS2.6 = OFF (Select MMCIF on CN12 instead of SDHI1) | |
| 32 | * DS2.7 = ON (Select MMCIF on CN12 instead of SDHI1) | |
| 33 | * | |
| 34 | */ | |
| 35 | #define HIZCRA 0xa4050158 | |
| 36 | #define PGDR 0xa405012c | |
| 37 | ||
| 38 | extern inline void mmcif_update_progress(int nr) | |
| 39 | { | |
| 40 | /* disable Hi-Z for LED pins */ | |
| 41 | __raw_writew(__raw_readw(HIZCRA) & ~(1 << 1), HIZCRA); | |
| 42 | ||
| 43 | /* update progress on LED4, LED5, LED6 and LED7 */ | |
| 44 | __raw_writeb(1 << (nr - 1), PGDR); | |
| 45 | } | |
| 46 | ||
| 47 | #endif /* __ASSEMBLY__ */ |