]>
Commit | Line | Data |
---|---|---|
24a07a12 | 1 | /* |
96f1050d RG |
2 | * Copyright 2004-2009 Analog Devices Inc. |
3 | * 2005 National ICT Australia (NICTA) | |
4 | * Aidan Williams <aidan@nicta.com.au> | |
24a07a12 | 5 | * |
96f1050d | 6 | * Licensed under the GPL-2 or later. |
24a07a12 RH |
7 | */ |
8 | ||
9 | #include <linux/device.h> | |
10 | #include <linux/platform_device.h> | |
11 | #include <linux/mtd/mtd.h> | |
12 | #include <linux/mtd/partitions.h> | |
de8c43f2 | 13 | #include <linux/mtd/physmap.h> |
24a07a12 RH |
14 | #include <linux/spi/spi.h> |
15 | #include <linux/spi/flash.h> | |
1f83b8f1 | 16 | #include <linux/irq.h> |
81d9c7f2 | 17 | #include <linux/i2c.h> |
24a07a12 | 18 | #include <linux/interrupt.h> |
c6c4d7bb | 19 | #include <linux/usb/musb.h> |
24a07a12 | 20 | #include <asm/bfin5xx_spi.h> |
c6c4d7bb BW |
21 | #include <asm/dma.h> |
22 | #include <asm/gpio.h> | |
23 | #include <asm/nand.h> | |
14b03204 | 24 | #include <asm/dpmc.h> |
5d448dd5 | 25 | #include <asm/portmux.h> |
501674a5 | 26 | #include <asm/bfin_sdh.h> |
639f6571 | 27 | #include <mach/bf54x_keys.h> |
c6c4d7bb BW |
28 | #include <linux/input.h> |
29 | #include <linux/spi/ad7877.h> | |
24a07a12 RH |
30 | |
31 | /* | |
32 | * Name the Board for the /proc/cpuinfo | |
33 | */ | |
fe85cad2 | 34 | const char bfin_board_name[] = "ADI BF548-EZKIT"; |
24a07a12 RH |
35 | |
36 | /* | |
37 | * Driver needs to know address, irq and flag pin. | |
38 | */ | |
39 | ||
0a6304a9 | 40 | #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) |
3f375690 MH |
41 | #include <linux/usb/isp1760.h> |
42 | static struct resource bfin_isp1760_resources[] = { | |
0a6304a9 | 43 | [0] = { |
0a6304a9 MH |
44 | .start = 0x2C0C0000, |
45 | .end = 0x2C0C0000 + 0xfffff, | |
46 | .flags = IORESOURCE_MEM, | |
47 | }, | |
48 | [1] = { | |
49 | .start = IRQ_PG7, | |
50 | .end = IRQ_PG7, | |
51 | .flags = IORESOURCE_IRQ, | |
52 | }, | |
53 | }; | |
54 | ||
3f375690 MH |
55 | static struct isp1760_platform_data isp1760_priv = { |
56 | .is_isp1761 = 0, | |
3f375690 MH |
57 | .bus_width_16 = 1, |
58 | .port1_otg = 0, | |
59 | .analog_oc = 0, | |
60 | .dack_polarity_high = 0, | |
61 | .dreq_polarity_high = 0, | |
0a6304a9 MH |
62 | }; |
63 | ||
3f375690 MH |
64 | static struct platform_device bfin_isp1760_device = { |
65 | .name = "isp1760-hcd", | |
66 | .id = 0, | |
67 | .dev = { | |
68 | .platform_data = &isp1760_priv, | |
69 | }, | |
70 | .num_resources = ARRAY_SIZE(bfin_isp1760_resources), | |
71 | .resource = bfin_isp1760_resources, | |
0a6304a9 | 72 | }; |
0a6304a9 MH |
73 | #endif |
74 | ||
c6c4d7bb BW |
75 | #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) |
76 | ||
639f6571 | 77 | #include <mach/bf54x-lq043.h> |
c6c4d7bb BW |
78 | |
79 | static struct bfin_bf54xfb_mach_info bf54x_lq043_data = { | |
0e101ec1 SP |
80 | .width = 95, |
81 | .height = 54, | |
c6c4d7bb BW |
82 | .xres = {480, 480, 480}, |
83 | .yres = {272, 272, 272}, | |
84 | .bpp = {24, 24, 24}, | |
85 | .disp = GPIO_PE3, | |
86 | }; | |
87 | ||
88 | static struct resource bf54x_lq043_resources[] = { | |
89 | { | |
90 | .start = IRQ_EPPI0_ERR, | |
91 | .end = IRQ_EPPI0_ERR, | |
92 | .flags = IORESOURCE_IRQ, | |
93 | }, | |
94 | }; | |
95 | ||
96 | static struct platform_device bf54x_lq043_device = { | |
97 | .name = "bf54x-lq043", | |
98 | .id = -1, | |
99 | .num_resources = ARRAY_SIZE(bf54x_lq043_resources), | |
100 | .resource = bf54x_lq043_resources, | |
101 | .dev = { | |
102 | .platform_data = &bf54x_lq043_data, | |
103 | }, | |
104 | }; | |
105 | #endif | |
106 | ||
107 | #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) | |
8f740ef3 | 108 | static const unsigned int bf548_keymap[] = { |
c6c4d7bb BW |
109 | KEYVAL(0, 0, KEY_ENTER), |
110 | KEYVAL(0, 1, KEY_HELP), | |
111 | KEYVAL(0, 2, KEY_0), | |
112 | KEYVAL(0, 3, KEY_BACKSPACE), | |
113 | KEYVAL(1, 0, KEY_TAB), | |
114 | KEYVAL(1, 1, KEY_9), | |
115 | KEYVAL(1, 2, KEY_8), | |
116 | KEYVAL(1, 3, KEY_7), | |
117 | KEYVAL(2, 0, KEY_DOWN), | |
118 | KEYVAL(2, 1, KEY_6), | |
119 | KEYVAL(2, 2, KEY_5), | |
120 | KEYVAL(2, 3, KEY_4), | |
121 | KEYVAL(3, 0, KEY_UP), | |
122 | KEYVAL(3, 1, KEY_3), | |
123 | KEYVAL(3, 2, KEY_2), | |
124 | KEYVAL(3, 3, KEY_1), | |
125 | }; | |
126 | ||
127 | static struct bfin_kpad_platform_data bf54x_kpad_data = { | |
128 | .rows = 4, | |
129 | .cols = 4, | |
8f740ef3 MH |
130 | .keymap = bf548_keymap, |
131 | .keymapsize = ARRAY_SIZE(bf548_keymap), | |
c6c4d7bb BW |
132 | .repeat = 0, |
133 | .debounce_time = 5000, /* ns (5ms) */ | |
134 | .coldrive_time = 1000, /* ns (1ms) */ | |
135 | .keyup_test_interval = 50, /* ms (50ms) */ | |
136 | }; | |
137 | ||
138 | static struct resource bf54x_kpad_resources[] = { | |
139 | { | |
140 | .start = IRQ_KEY, | |
141 | .end = IRQ_KEY, | |
142 | .flags = IORESOURCE_IRQ, | |
143 | }, | |
144 | }; | |
145 | ||
146 | static struct platform_device bf54x_kpad_device = { | |
147 | .name = "bf54x-keys", | |
148 | .id = -1, | |
149 | .num_resources = ARRAY_SIZE(bf54x_kpad_resources), | |
150 | .resource = bf54x_kpad_resources, | |
151 | .dev = { | |
152 | .platform_data = &bf54x_kpad_data, | |
153 | }, | |
154 | }; | |
155 | #endif | |
156 | ||
adfc0467 | 157 | #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) |
aca5e4aa MH |
158 | #include <asm/bfin_rotary.h> |
159 | ||
160 | static struct bfin_rotary_platform_data bfin_rotary_data = { | |
161 | /*.rotary_up_key = KEY_UP,*/ | |
162 | /*.rotary_down_key = KEY_DOWN,*/ | |
163 | .rotary_rel_code = REL_WHEEL, | |
164 | .rotary_button_key = KEY_ENTER, | |
165 | .debounce = 10, /* 0..17 */ | |
166 | .mode = ROT_QUAD_ENC | ROT_DEBE, | |
167 | }; | |
168 | ||
169 | static struct resource bfin_rotary_resources[] = { | |
170 | { | |
171 | .start = IRQ_CNT, | |
172 | .end = IRQ_CNT, | |
173 | .flags = IORESOURCE_IRQ, | |
174 | }, | |
175 | }; | |
176 | ||
177 | static struct platform_device bfin_rotary_device = { | |
178 | .name = "bfin-rotary", | |
179 | .id = -1, | |
180 | .num_resources = ARRAY_SIZE(bfin_rotary_resources), | |
181 | .resource = bfin_rotary_resources, | |
182 | .dev = { | |
183 | .platform_data = &bfin_rotary_data, | |
184 | }, | |
185 | }; | |
186 | #endif | |
187 | ||
ffc4d8bc | 188 | #if defined(CONFIG_INPUT_ADXL34X) || defined(CONFIG_INPUT_ADXL34X_MODULE) |
ffc4d8bc MH |
189 | #include <linux/spi/adxl34x.h> |
190 | static const struct adxl34x_platform_data adxl34x_info = { | |
191 | .x_axis_offset = 0, | |
192 | .y_axis_offset = 0, | |
193 | .z_axis_offset = 0, | |
194 | .tap_threshold = 0x31, | |
195 | .tap_duration = 0x10, | |
196 | .tap_latency = 0x60, | |
197 | .tap_window = 0xF0, | |
198 | .tap_axis_control = ADXL_TAP_X_EN | ADXL_TAP_Y_EN | ADXL_TAP_Z_EN, | |
199 | .act_axis_control = 0xFF, | |
200 | .activity_threshold = 5, | |
201 | .inactivity_threshold = 3, | |
202 | .inactivity_time = 4, | |
203 | .free_fall_threshold = 0x7, | |
204 | .free_fall_time = 0x20, | |
205 | .data_rate = 0x8, | |
206 | .data_range = ADXL_FULL_RES, | |
207 | ||
208 | .ev_type = EV_ABS, | |
209 | .ev_code_x = ABS_X, /* EV_REL */ | |
210 | .ev_code_y = ABS_Y, /* EV_REL */ | |
211 | .ev_code_z = ABS_Z, /* EV_REL */ | |
212 | ||
213 | .ev_code_tap_x = BTN_TOUCH, /* EV_KEY */ | |
214 | .ev_code_tap_y = BTN_TOUCH, /* EV_KEY */ | |
215 | .ev_code_tap_z = BTN_TOUCH, /* EV_KEY */ | |
216 | ||
217 | /* .ev_code_ff = KEY_F,*/ /* EV_KEY */ | |
218 | /* .ev_code_act_inactivity = KEY_A,*/ /* EV_KEY */ | |
219 | .power_mode = ADXL_AUTO_SLEEP | ADXL_LINK, | |
220 | .fifo_mode = ADXL_FIFO_STREAM, | |
221 | }; | |
222 | #endif | |
223 | ||
24a07a12 RH |
224 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) |
225 | static struct platform_device rtc_device = { | |
226 | .name = "rtc-bfin", | |
227 | .id = -1, | |
228 | }; | |
229 | #endif | |
230 | ||
231 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
232 | static struct resource bfin_uart_resources[] = { | |
233 | #ifdef CONFIG_SERIAL_BFIN_UART0 | |
234 | { | |
235 | .start = 0xFFC00400, | |
236 | .end = 0xFFC004FF, | |
237 | .flags = IORESOURCE_MEM, | |
238 | }, | |
239 | #endif | |
240 | #ifdef CONFIG_SERIAL_BFIN_UART1 | |
241 | { | |
242 | .start = 0xFFC02000, | |
243 | .end = 0xFFC020FF, | |
244 | .flags = IORESOURCE_MEM, | |
245 | }, | |
246 | #endif | |
247 | #ifdef CONFIG_SERIAL_BFIN_UART2 | |
248 | { | |
249 | .start = 0xFFC02100, | |
250 | .end = 0xFFC021FF, | |
251 | .flags = IORESOURCE_MEM, | |
252 | }, | |
253 | #endif | |
254 | #ifdef CONFIG_SERIAL_BFIN_UART3 | |
255 | { | |
256 | .start = 0xFFC03100, | |
257 | .end = 0xFFC031FF, | |
cc2e16bd | 258 | .flags = IORESOURCE_MEM, |
24a07a12 RH |
259 | }, |
260 | #endif | |
261 | }; | |
262 | ||
263 | static struct platform_device bfin_uart_device = { | |
264 | .name = "bfin-uart", | |
265 | .id = 1, | |
266 | .num_resources = ARRAY_SIZE(bfin_uart_resources), | |
267 | .resource = bfin_uart_resources, | |
268 | }; | |
269 | #endif | |
270 | ||
5be36d22 | 271 | #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) |
5be36d22 | 272 | #ifdef CONFIG_BFIN_SIR0 |
42bd8bcb | 273 | static struct resource bfin_sir0_resources[] = { |
5be36d22 GY |
274 | { |
275 | .start = 0xFFC00400, | |
276 | .end = 0xFFC004FF, | |
277 | .flags = IORESOURCE_MEM, | |
278 | }, | |
42bd8bcb GY |
279 | { |
280 | .start = IRQ_UART0_RX, | |
281 | .end = IRQ_UART0_RX+1, | |
282 | .flags = IORESOURCE_IRQ, | |
283 | }, | |
284 | { | |
285 | .start = CH_UART0_RX, | |
286 | .end = CH_UART0_RX+1, | |
287 | .flags = IORESOURCE_DMA, | |
288 | }, | |
289 | }; | |
290 | static struct platform_device bfin_sir0_device = { | |
291 | .name = "bfin_sir", | |
292 | .id = 0, | |
293 | .num_resources = ARRAY_SIZE(bfin_sir0_resources), | |
294 | .resource = bfin_sir0_resources, | |
295 | }; | |
5be36d22 GY |
296 | #endif |
297 | #ifdef CONFIG_BFIN_SIR1 | |
42bd8bcb | 298 | static struct resource bfin_sir1_resources[] = { |
5be36d22 GY |
299 | { |
300 | .start = 0xFFC02000, | |
301 | .end = 0xFFC020FF, | |
302 | .flags = IORESOURCE_MEM, | |
303 | }, | |
42bd8bcb GY |
304 | { |
305 | .start = IRQ_UART1_RX, | |
306 | .end = IRQ_UART1_RX+1, | |
307 | .flags = IORESOURCE_IRQ, | |
308 | }, | |
309 | { | |
310 | .start = CH_UART1_RX, | |
311 | .end = CH_UART1_RX+1, | |
312 | .flags = IORESOURCE_DMA, | |
313 | }, | |
314 | }; | |
315 | static struct platform_device bfin_sir1_device = { | |
316 | .name = "bfin_sir", | |
317 | .id = 1, | |
318 | .num_resources = ARRAY_SIZE(bfin_sir1_resources), | |
319 | .resource = bfin_sir1_resources, | |
320 | }; | |
5be36d22 GY |
321 | #endif |
322 | #ifdef CONFIG_BFIN_SIR2 | |
42bd8bcb | 323 | static struct resource bfin_sir2_resources[] = { |
5be36d22 GY |
324 | { |
325 | .start = 0xFFC02100, | |
326 | .end = 0xFFC021FF, | |
327 | .flags = IORESOURCE_MEM, | |
328 | }, | |
42bd8bcb GY |
329 | { |
330 | .start = IRQ_UART2_RX, | |
331 | .end = IRQ_UART2_RX+1, | |
332 | .flags = IORESOURCE_IRQ, | |
333 | }, | |
334 | { | |
335 | .start = CH_UART2_RX, | |
336 | .end = CH_UART2_RX+1, | |
337 | .flags = IORESOURCE_DMA, | |
338 | }, | |
339 | }; | |
340 | static struct platform_device bfin_sir2_device = { | |
341 | .name = "bfin_sir", | |
342 | .id = 2, | |
343 | .num_resources = ARRAY_SIZE(bfin_sir2_resources), | |
344 | .resource = bfin_sir2_resources, | |
345 | }; | |
5be36d22 GY |
346 | #endif |
347 | #ifdef CONFIG_BFIN_SIR3 | |
42bd8bcb | 348 | static struct resource bfin_sir3_resources[] = { |
5be36d22 GY |
349 | { |
350 | .start = 0xFFC03100, | |
351 | .end = 0xFFC031FF, | |
352 | .flags = IORESOURCE_MEM, | |
353 | }, | |
42bd8bcb GY |
354 | { |
355 | .start = IRQ_UART3_RX, | |
356 | .end = IRQ_UART3_RX+1, | |
357 | .flags = IORESOURCE_IRQ, | |
358 | }, | |
359 | { | |
360 | .start = CH_UART3_RX, | |
361 | .end = CH_UART3_RX+1, | |
362 | .flags = IORESOURCE_DMA, | |
363 | }, | |
5be36d22 | 364 | }; |
42bd8bcb | 365 | static struct platform_device bfin_sir3_device = { |
5be36d22 | 366 | .name = "bfin_sir", |
42bd8bcb GY |
367 | .id = 3, |
368 | .num_resources = ARRAY_SIZE(bfin_sir3_resources), | |
369 | .resource = bfin_sir3_resources, | |
5be36d22 GY |
370 | }; |
371 | #endif | |
42bd8bcb | 372 | #endif |
5be36d22 | 373 | |
c6c4d7bb | 374 | #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) |
7a8b71db MF |
375 | #include <linux/smsc911x.h> |
376 | ||
c6c4d7bb BW |
377 | static struct resource smsc911x_resources[] = { |
378 | { | |
379 | .name = "smsc911x-memory", | |
380 | .start = 0x24000000, | |
381 | .end = 0x24000000 + 0xFF, | |
382 | .flags = IORESOURCE_MEM, | |
383 | }, | |
384 | { | |
385 | .start = IRQ_PE8, | |
386 | .end = IRQ_PE8, | |
387 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, | |
388 | }, | |
389 | }; | |
7a8b71db MF |
390 | |
391 | static struct smsc911x_platform_config smsc911x_config = { | |
392 | .flags = SMSC911X_USE_32BIT, | |
393 | .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, | |
394 | .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, | |
395 | .phy_interface = PHY_INTERFACE_MODE_MII, | |
396 | }; | |
397 | ||
c6c4d7bb BW |
398 | static struct platform_device smsc911x_device = { |
399 | .name = "smsc911x", | |
400 | .id = 0, | |
401 | .num_resources = ARRAY_SIZE(smsc911x_resources), | |
402 | .resource = smsc911x_resources, | |
7a8b71db MF |
403 | .dev = { |
404 | .platform_data = &smsc911x_config, | |
405 | }, | |
c6c4d7bb BW |
406 | }; |
407 | #endif | |
408 | ||
c6c4d7bb BW |
409 | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) |
410 | static struct resource musb_resources[] = { | |
411 | [0] = { | |
412 | .start = 0xFFC03C00, | |
413 | .end = 0xFFC040FF, | |
414 | .flags = IORESOURCE_MEM, | |
415 | }, | |
416 | [1] = { /* general IRQ */ | |
417 | .start = IRQ_USB_INT0, | |
418 | .end = IRQ_USB_INT0, | |
419 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
420 | }, | |
421 | [2] = { /* DMA IRQ */ | |
422 | .start = IRQ_USB_DMA, | |
423 | .end = IRQ_USB_DMA, | |
424 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
425 | }, | |
426 | }; | |
427 | ||
50041acb BW |
428 | static struct musb_hdrc_config musb_config = { |
429 | .multipoint = 0, | |
430 | .dyn_fifo = 0, | |
431 | .soft_con = 1, | |
432 | .dma = 1, | |
fea05dac BW |
433 | .num_eps = 8, |
434 | .dma_channels = 8, | |
50041acb BW |
435 | .gpio_vrsel = GPIO_PE7, |
436 | }; | |
437 | ||
c6c4d7bb | 438 | static struct musb_hdrc_platform_data musb_plat = { |
2935077e | 439 | #if defined(CONFIG_USB_MUSB_OTG) |
c6c4d7bb | 440 | .mode = MUSB_OTG, |
2935077e | 441 | #elif defined(CONFIG_USB_MUSB_HDRC_HCD) |
c6c4d7bb | 442 | .mode = MUSB_HOST, |
2935077e | 443 | #elif defined(CONFIG_USB_GADGET_MUSB_HDRC) |
c6c4d7bb BW |
444 | .mode = MUSB_PERIPHERAL, |
445 | #endif | |
50041acb | 446 | .config = &musb_config, |
c6c4d7bb BW |
447 | }; |
448 | ||
449 | static u64 musb_dmamask = ~(u32)0; | |
450 | ||
451 | static struct platform_device musb_device = { | |
452 | .name = "musb_hdrc", | |
453 | .id = 0, | |
454 | .dev = { | |
455 | .dma_mask = &musb_dmamask, | |
456 | .coherent_dma_mask = 0xffffffff, | |
457 | .platform_data = &musb_plat, | |
458 | }, | |
459 | .num_resources = ARRAY_SIZE(musb_resources), | |
460 | .resource = musb_resources, | |
461 | }; | |
462 | #endif | |
463 | ||
464 | #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) | |
465 | static struct resource bfin_atapi_resources[] = { | |
466 | { | |
467 | .start = 0xFFC03800, | |
468 | .end = 0xFFC0386F, | |
469 | .flags = IORESOURCE_MEM, | |
470 | }, | |
471 | { | |
472 | .start = IRQ_ATAPI_ERR, | |
473 | .end = IRQ_ATAPI_ERR, | |
474 | .flags = IORESOURCE_IRQ, | |
475 | }, | |
476 | }; | |
477 | ||
478 | static struct platform_device bfin_atapi_device = { | |
479 | .name = "pata-bf54x", | |
480 | .id = -1, | |
481 | .num_resources = ARRAY_SIZE(bfin_atapi_resources), | |
482 | .resource = bfin_atapi_resources, | |
483 | }; | |
484 | #endif | |
485 | ||
486 | #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) | |
487 | static struct mtd_partition partition_info[] = { | |
488 | { | |
aa582977 | 489 | .name = "linux kernel(nand)", |
c6c4d7bb | 490 | .offset = 0, |
f4585a08 | 491 | .size = 4 * 1024 * 1024, |
c6c4d7bb BW |
492 | }, |
493 | { | |
aa582977 | 494 | .name = "file system(nand)", |
edf05641 MF |
495 | .offset = MTDPART_OFS_APPEND, |
496 | .size = MTDPART_SIZ_FULL, | |
c6c4d7bb BW |
497 | }, |
498 | }; | |
499 | ||
500 | static struct bf5xx_nand_platform bf5xx_nand_platform = { | |
501 | .page_size = NFC_PG_SIZE_256, | |
502 | .data_width = NFC_NWIDTH_8, | |
503 | .partitions = partition_info, | |
504 | .nr_partitions = ARRAY_SIZE(partition_info), | |
505 | .rd_dly = 3, | |
506 | .wr_dly = 3, | |
507 | }; | |
508 | ||
509 | static struct resource bf5xx_nand_resources[] = { | |
510 | { | |
511 | .start = 0xFFC03B00, | |
512 | .end = 0xFFC03B4F, | |
513 | .flags = IORESOURCE_MEM, | |
514 | }, | |
515 | { | |
516 | .start = CH_NFC, | |
517 | .end = CH_NFC, | |
518 | .flags = IORESOURCE_IRQ, | |
519 | }, | |
520 | }; | |
521 | ||
522 | static struct platform_device bf5xx_nand_device = { | |
523 | .name = "bf5xx-nand", | |
524 | .id = 0, | |
525 | .num_resources = ARRAY_SIZE(bf5xx_nand_resources), | |
526 | .resource = bf5xx_nand_resources, | |
527 | .dev = { | |
528 | .platform_data = &bf5xx_nand_platform, | |
529 | }, | |
530 | }; | |
531 | #endif | |
532 | ||
3d7e6cf8 | 533 | #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) |
501674a5 CC |
534 | |
535 | static struct bfin_sd_host bfin_sdh_data = { | |
536 | .dma_chan = CH_SDH, | |
537 | .irq_int0 = IRQ_SDH_MASK0, | |
538 | .pin_req = {P_SD_D0, P_SD_D1, P_SD_D2, P_SD_D3, P_SD_CLK, P_SD_CMD, 0}, | |
539 | }; | |
540 | ||
c6c4d7bb BW |
541 | static struct platform_device bf54x_sdh_device = { |
542 | .name = "bfin-sdh", | |
543 | .id = 0, | |
501674a5 CC |
544 | .dev = { |
545 | .platform_data = &bfin_sdh_data, | |
546 | }, | |
c6c4d7bb BW |
547 | }; |
548 | #endif | |
549 | ||
793dc27b | 550 | #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) |
de8c43f2 MF |
551 | static struct mtd_partition ezkit_partitions[] = { |
552 | { | |
aa582977 | 553 | .name = "bootloader(nor)", |
edf05641 | 554 | .size = 0x40000, |
de8c43f2 MF |
555 | .offset = 0, |
556 | }, { | |
aa582977 | 557 | .name = "linux kernel(nor)", |
664d0403 | 558 | .size = 0x400000, |
de8c43f2 MF |
559 | .offset = MTDPART_OFS_APPEND, |
560 | }, { | |
aa582977 | 561 | .name = "file system(nor)", |
de8c43f2 MF |
562 | .size = MTDPART_SIZ_FULL, |
563 | .offset = MTDPART_OFS_APPEND, | |
564 | } | |
565 | }; | |
566 | ||
567 | static struct physmap_flash_data ezkit_flash_data = { | |
568 | .width = 2, | |
569 | .parts = ezkit_partitions, | |
570 | .nr_parts = ARRAY_SIZE(ezkit_partitions), | |
571 | }; | |
572 | ||
573 | static struct resource ezkit_flash_resource = { | |
574 | .start = 0x20000000, | |
664d0403 | 575 | .end = 0x21ffffff, |
de8c43f2 MF |
576 | .flags = IORESOURCE_MEM, |
577 | }; | |
578 | ||
579 | static struct platform_device ezkit_flash_device = { | |
580 | .name = "physmap-flash", | |
581 | .id = 0, | |
582 | .dev = { | |
583 | .platform_data = &ezkit_flash_data, | |
584 | }, | |
585 | .num_resources = 1, | |
586 | .resource = &ezkit_flash_resource, | |
587 | }; | |
793dc27b | 588 | #endif |
de8c43f2 | 589 | |
c6c4d7bb BW |
590 | #if defined(CONFIG_MTD_M25P80) \ |
591 | || defined(CONFIG_MTD_M25P80_MODULE) | |
592 | /* SPI flash chip (m25p16) */ | |
593 | static struct mtd_partition bfin_spi_flash_partitions[] = { | |
594 | { | |
aa582977 | 595 | .name = "bootloader(spi)", |
c6c4d7bb BW |
596 | .size = 0x00040000, |
597 | .offset = 0, | |
598 | .mask_flags = MTD_CAP_ROM | |
599 | }, { | |
aa582977 | 600 | .name = "linux kernel(spi)", |
edf05641 MF |
601 | .size = MTDPART_SIZ_FULL, |
602 | .offset = MTDPART_OFS_APPEND, | |
c6c4d7bb BW |
603 | } |
604 | }; | |
605 | ||
606 | static struct flash_platform_data bfin_spi_flash_data = { | |
607 | .name = "m25p80", | |
608 | .parts = bfin_spi_flash_partitions, | |
609 | .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), | |
610 | .type = "m25p16", | |
611 | }; | |
612 | ||
613 | static struct bfin5xx_spi_chip spi_flash_chip_info = { | |
614 | .enable_dma = 0, /* use dma transfer with this chip*/ | |
615 | .bits_per_word = 8, | |
c6c4d7bb BW |
616 | }; |
617 | #endif | |
618 | ||
37fa2421 BS |
619 | #if defined(CONFIG_SND_BLACKFIN_AD1836) \ |
620 | || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) | |
621 | static struct bfin5xx_spi_chip ad1836_spi_chip_info = { | |
622 | .enable_dma = 0, | |
623 | .bits_per_word = 16, | |
624 | }; | |
625 | #endif | |
626 | ||
c6c4d7bb BW |
627 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) |
628 | static struct bfin5xx_spi_chip spi_ad7877_chip_info = { | |
c6c4d7bb BW |
629 | .enable_dma = 0, |
630 | .bits_per_word = 16, | |
631 | }; | |
632 | ||
633 | static const struct ad7877_platform_data bfin_ad7877_ts_info = { | |
634 | .model = 7877, | |
635 | .vref_delay_usecs = 50, /* internal, no capacitor */ | |
636 | .x_plate_ohms = 419, | |
637 | .y_plate_ohms = 486, | |
638 | .pressure_max = 1000, | |
639 | .pressure_min = 0, | |
640 | .stopacq_polarity = 1, | |
641 | .first_conversion_delay = 3, | |
642 | .acquisition_time = 1, | |
643 | .averaging = 1, | |
644 | .pen_down_acc_interval = 1, | |
645 | }; | |
646 | #endif | |
647 | ||
6e668936 MH |
648 | #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) |
649 | static struct bfin5xx_spi_chip spidev_chip_info = { | |
650 | .enable_dma = 0, | |
651 | .bits_per_word = 8, | |
652 | }; | |
653 | #endif | |
654 | ||
ffc4d8bc MH |
655 | #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) |
656 | static struct bfin5xx_spi_chip spi_adxl34x_chip_info = { | |
657 | .enable_dma = 0, /* use dma transfer with this chip*/ | |
658 | .bits_per_word = 8, | |
ffc4d8bc MH |
659 | }; |
660 | #endif | |
661 | ||
5bda2723 | 662 | static struct spi_board_info bfin_spi_board_info[] __initdata = { |
c6c4d7bb BW |
663 | #if defined(CONFIG_MTD_M25P80) \ |
664 | || defined(CONFIG_MTD_M25P80_MODULE) | |
665 | { | |
666 | /* the modalias must be the same as spi device driver name */ | |
667 | .modalias = "m25p80", /* Name of spi_driver for this device */ | |
668 | .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ | |
669 | .bus_num = 0, /* Framework bus number */ | |
670 | .chip_select = 1, /* SPI_SSEL1*/ | |
671 | .platform_data = &bfin_spi_flash_data, | |
672 | .controller_data = &spi_flash_chip_info, | |
673 | .mode = SPI_MODE_3, | |
674 | }, | |
675 | #endif | |
37fa2421 BS |
676 | #if defined(CONFIG_SND_BLACKFIN_AD1836) \ |
677 | || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) | |
678 | { | |
dac98174 | 679 | .modalias = "ad1836", |
37fa2421 BS |
680 | .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ |
681 | .bus_num = 1, | |
682 | .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, | |
683 | .controller_data = &ad1836_spi_chip_info, | |
684 | }, | |
685 | #endif | |
c6c4d7bb | 686 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) |
ffc4d8bc MH |
687 | { |
688 | .modalias = "ad7877", | |
689 | .platform_data = &bfin_ad7877_ts_info, | |
690 | .irq = IRQ_PB4, /* old boards (<=Rev 1.3) use IRQ_PJ11 */ | |
691 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | |
692 | .bus_num = 0, | |
693 | .chip_select = 2, | |
694 | .controller_data = &spi_ad7877_chip_info, | |
695 | }, | |
c6c4d7bb | 696 | #endif |
6e668936 MH |
697 | #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) |
698 | { | |
699 | .modalias = "spidev", | |
700 | .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ | |
701 | .bus_num = 0, | |
702 | .chip_select = 1, | |
703 | .controller_data = &spidev_chip_info, | |
704 | }, | |
705 | #endif | |
ffc4d8bc MH |
706 | #if defined(CONFIG_INPUT_ADXL34X_SPI) || defined(CONFIG_INPUT_ADXL34X_SPI_MODULE) |
707 | { | |
708 | .modalias = "adxl34x", | |
709 | .platform_data = &adxl34x_info, | |
710 | .irq = IRQ_PC5, | |
711 | .max_speed_hz = 5000000, /* max spi clock (SCK) speed in HZ */ | |
712 | .bus_num = 1, | |
713 | .chip_select = 2, | |
714 | .controller_data = &spi_adxl34x_chip_info, | |
715 | .mode = SPI_MODE_3, | |
716 | }, | |
717 | #endif | |
c6c4d7bb | 718 | }; |
5bda2723 | 719 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) |
c6c4d7bb BW |
720 | /* SPI (0) */ |
721 | static struct resource bfin_spi0_resource[] = { | |
722 | [0] = { | |
723 | .start = SPI0_REGBASE, | |
724 | .end = SPI0_REGBASE + 0xFF, | |
725 | .flags = IORESOURCE_MEM, | |
726 | }, | |
727 | [1] = { | |
728 | .start = CH_SPI0, | |
729 | .end = CH_SPI0, | |
53122693 YL |
730 | .flags = IORESOURCE_DMA, |
731 | }, | |
732 | [2] = { | |
733 | .start = IRQ_SPI0, | |
734 | .end = IRQ_SPI0, | |
c6c4d7bb BW |
735 | .flags = IORESOURCE_IRQ, |
736 | } | |
737 | }; | |
738 | ||
739 | /* SPI (1) */ | |
740 | static struct resource bfin_spi1_resource[] = { | |
741 | [0] = { | |
742 | .start = SPI1_REGBASE, | |
743 | .end = SPI1_REGBASE + 0xFF, | |
744 | .flags = IORESOURCE_MEM, | |
745 | }, | |
746 | [1] = { | |
747 | .start = CH_SPI1, | |
748 | .end = CH_SPI1, | |
53122693 YL |
749 | .flags = IORESOURCE_DMA, |
750 | }, | |
751 | [2] = { | |
752 | .start = IRQ_SPI1, | |
753 | .end = IRQ_SPI1, | |
c6c4d7bb BW |
754 | .flags = IORESOURCE_IRQ, |
755 | } | |
756 | }; | |
757 | ||
758 | /* SPI controller data */ | |
5d448dd5 | 759 | static struct bfin5xx_spi_master bf54x_spi_master_info0 = { |
4e4d496e | 760 | .num_chipselect = 3, |
c6c4d7bb | 761 | .enable_dma = 1, /* master has the ability to do dma transfer */ |
5d448dd5 | 762 | .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, |
c6c4d7bb BW |
763 | }; |
764 | ||
765 | static struct platform_device bf54x_spi_master0 = { | |
766 | .name = "bfin-spi", | |
767 | .id = 0, /* Bus number */ | |
768 | .num_resources = ARRAY_SIZE(bfin_spi0_resource), | |
769 | .resource = bfin_spi0_resource, | |
770 | .dev = { | |
5d448dd5 | 771 | .platform_data = &bf54x_spi_master_info0, /* Passed to driver */ |
c6c4d7bb BW |
772 | }, |
773 | }; | |
774 | ||
5d448dd5 | 775 | static struct bfin5xx_spi_master bf54x_spi_master_info1 = { |
4e4d496e | 776 | .num_chipselect = 3, |
5d448dd5 BW |
777 | .enable_dma = 1, /* master has the ability to do dma transfer */ |
778 | .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0}, | |
779 | }; | |
780 | ||
c6c4d7bb BW |
781 | static struct platform_device bf54x_spi_master1 = { |
782 | .name = "bfin-spi", | |
783 | .id = 1, /* Bus number */ | |
784 | .num_resources = ARRAY_SIZE(bfin_spi1_resource), | |
785 | .resource = bfin_spi1_resource, | |
786 | .dev = { | |
5d448dd5 | 787 | .platform_data = &bf54x_spi_master_info1, /* Passed to driver */ |
c6c4d7bb BW |
788 | }, |
789 | }; | |
790 | #endif /* spi master and devices */ | |
791 | ||
792 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) | |
793 | static struct resource bfin_twi0_resource[] = { | |
794 | [0] = { | |
795 | .start = TWI0_REGBASE, | |
796 | .end = TWI0_REGBASE + 0xFF, | |
797 | .flags = IORESOURCE_MEM, | |
798 | }, | |
799 | [1] = { | |
800 | .start = IRQ_TWI0, | |
801 | .end = IRQ_TWI0, | |
802 | .flags = IORESOURCE_IRQ, | |
803 | }, | |
804 | }; | |
805 | ||
806 | static struct platform_device i2c_bfin_twi0_device = { | |
807 | .name = "i2c-bfin-twi", | |
808 | .id = 0, | |
809 | .num_resources = ARRAY_SIZE(bfin_twi0_resource), | |
810 | .resource = bfin_twi0_resource, | |
811 | }; | |
812 | ||
7160e950 | 813 | #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ |
c6c4d7bb BW |
814 | static struct resource bfin_twi1_resource[] = { |
815 | [0] = { | |
816 | .start = TWI1_REGBASE, | |
817 | .end = TWI1_REGBASE + 0xFF, | |
818 | .flags = IORESOURCE_MEM, | |
819 | }, | |
820 | [1] = { | |
821 | .start = IRQ_TWI1, | |
822 | .end = IRQ_TWI1, | |
823 | .flags = IORESOURCE_IRQ, | |
824 | }, | |
825 | }; | |
826 | ||
827 | static struct platform_device i2c_bfin_twi1_device = { | |
828 | .name = "i2c-bfin-twi", | |
829 | .id = 1, | |
830 | .num_resources = ARRAY_SIZE(bfin_twi1_resource), | |
831 | .resource = bfin_twi1_resource, | |
832 | }; | |
833 | #endif | |
7160e950 | 834 | #endif |
c6c4d7bb | 835 | |
81d9c7f2 BW |
836 | static struct i2c_board_info __initdata bfin_i2c_board_info0[] = { |
837 | }; | |
838 | ||
839 | #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ | |
840 | static struct i2c_board_info __initdata bfin_i2c_board_info1[] = { | |
ebd58333 | 841 | #if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_BFIN_TWI_LCD_MODULE) |
81d9c7f2 BW |
842 | { |
843 | I2C_BOARD_INFO("pcf8574_lcd", 0x22), | |
81d9c7f2 BW |
844 | }, |
845 | #endif | |
204844eb | 846 | #if defined(CONFIG_INPUT_PCF8574) || defined(CONFIG_INPUT_PCF8574_MODULE) |
81d9c7f2 BW |
847 | { |
848 | I2C_BOARD_INFO("pcf8574_keypad", 0x27), | |
81d9c7f2 BW |
849 | .irq = 212, |
850 | }, | |
851 | #endif | |
ffc4d8bc MH |
852 | #if defined(CONFIG_INPUT_ADXL34X_I2C) || defined(CONFIG_INPUT_ADXL34X_I2C_MODULE) |
853 | { | |
854 | I2C_BOARD_INFO("adxl34x", 0x53), | |
855 | .irq = IRQ_PC5, | |
856 | .platform_data = (void *)&adxl34x_info, | |
857 | }, | |
858 | #endif | |
81d9c7f2 BW |
859 | }; |
860 | #endif | |
81d9c7f2 | 861 | |
2463ef22 MH |
862 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) |
863 | #include <linux/gpio_keys.h> | |
864 | ||
865 | static struct gpio_keys_button bfin_gpio_keys_table[] = { | |
866 | {BTN_0, GPIO_PB8, 1, "gpio-keys: BTN0"}, | |
867 | {BTN_1, GPIO_PB9, 1, "gpio-keys: BTN1"}, | |
868 | {BTN_2, GPIO_PB10, 1, "gpio-keys: BTN2"}, | |
869 | {BTN_3, GPIO_PB11, 1, "gpio-keys: BTN3"}, | |
870 | }; | |
871 | ||
872 | static struct gpio_keys_platform_data bfin_gpio_keys_data = { | |
873 | .buttons = bfin_gpio_keys_table, | |
874 | .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), | |
875 | }; | |
876 | ||
877 | static struct platform_device bfin_device_gpiokeys = { | |
878 | .name = "gpio-keys", | |
879 | .dev = { | |
880 | .platform_data = &bfin_gpio_keys_data, | |
881 | }, | |
882 | }; | |
883 | #endif | |
884 | ||
14b03204 MH |
885 | static const unsigned int cclk_vlev_datasheet[] = |
886 | { | |
887 | /* | |
888 | * Internal VLEV BF54XSBBC1533 | |
889 | ****temporarily using these values until data sheet is updated | |
890 | */ | |
891 | VRPAIR(VLEV_085, 150000000), | |
892 | VRPAIR(VLEV_090, 250000000), | |
893 | VRPAIR(VLEV_110, 276000000), | |
894 | VRPAIR(VLEV_115, 301000000), | |
895 | VRPAIR(VLEV_120, 525000000), | |
896 | VRPAIR(VLEV_125, 550000000), | |
897 | VRPAIR(VLEV_130, 600000000), | |
898 | }; | |
899 | ||
900 | static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { | |
901 | .tuple_tab = cclk_vlev_datasheet, | |
902 | .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), | |
903 | .vr_settling_time = 25 /* us */, | |
904 | }; | |
905 | ||
906 | static struct platform_device bfin_dpmc = { | |
907 | .name = "bfin dpmc", | |
908 | .dev = { | |
909 | .platform_data = &bfin_dmpc_vreg_data, | |
910 | }, | |
911 | }; | |
912 | ||
24a07a12 | 913 | static struct platform_device *ezkit_devices[] __initdata = { |
14b03204 MH |
914 | |
915 | &bfin_dpmc, | |
916 | ||
24a07a12 RH |
917 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) |
918 | &rtc_device, | |
919 | #endif | |
920 | ||
921 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
922 | &bfin_uart_device, | |
923 | #endif | |
c6c4d7bb | 924 | |
5be36d22 | 925 | #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) |
42bd8bcb GY |
926 | #ifdef CONFIG_BFIN_SIR0 |
927 | &bfin_sir0_device, | |
928 | #endif | |
929 | #ifdef CONFIG_BFIN_SIR1 | |
930 | &bfin_sir1_device, | |
931 | #endif | |
932 | #ifdef CONFIG_BFIN_SIR2 | |
933 | &bfin_sir2_device, | |
934 | #endif | |
935 | #ifdef CONFIG_BFIN_SIR3 | |
936 | &bfin_sir3_device, | |
937 | #endif | |
5be36d22 GY |
938 | #endif |
939 | ||
c6c4d7bb BW |
940 | #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) |
941 | &bf54x_lq043_device, | |
942 | #endif | |
943 | ||
944 | #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) | |
945 | &smsc911x_device, | |
946 | #endif | |
947 | ||
c6c4d7bb BW |
948 | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) |
949 | &musb_device, | |
950 | #endif | |
951 | ||
3f375690 MH |
952 | #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) |
953 | &bfin_isp1760_device, | |
954 | #endif | |
955 | ||
c6c4d7bb BW |
956 | #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) |
957 | &bfin_atapi_device, | |
958 | #endif | |
959 | ||
960 | #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) | |
961 | &bf5xx_nand_device, | |
962 | #endif | |
963 | ||
3d7e6cf8 | 964 | #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE) |
c6c4d7bb BW |
965 | &bf54x_sdh_device, |
966 | #endif | |
967 | ||
968 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | |
969 | &bf54x_spi_master0, | |
d4b1d273 | 970 | &bf54x_spi_master1, |
c6c4d7bb BW |
971 | #endif |
972 | ||
973 | #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) | |
974 | &bf54x_kpad_device, | |
975 | #endif | |
976 | ||
adfc0467 | 977 | #if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE) |
aca5e4aa MH |
978 | &bfin_rotary_device, |
979 | #endif | |
980 | ||
c6c4d7bb BW |
981 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) |
982 | &i2c_bfin_twi0_device, | |
7160e950 | 983 | #if !defined(CONFIG_BF542) |
c6c4d7bb BW |
984 | &i2c_bfin_twi1_device, |
985 | #endif | |
7160e950 | 986 | #endif |
2463ef22 MH |
987 | |
988 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) | |
989 | &bfin_device_gpiokeys, | |
990 | #endif | |
cad2ab65 | 991 | |
793dc27b | 992 | #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) |
de8c43f2 | 993 | &ezkit_flash_device, |
793dc27b | 994 | #endif |
24a07a12 RH |
995 | }; |
996 | ||
a01d7a76 | 997 | static int __init ezkit_init(void) |
24a07a12 | 998 | { |
b85d858b | 999 | printk(KERN_INFO "%s(): registering device resources\n", __func__); |
81d9c7f2 | 1000 | |
81d9c7f2 BW |
1001 | i2c_register_board_info(0, bfin_i2c_board_info0, |
1002 | ARRAY_SIZE(bfin_i2c_board_info0)); | |
1003 | #if !defined(CONFIG_BF542) /* The BF542 only has 1 TWI */ | |
1004 | i2c_register_board_info(1, bfin_i2c_board_info1, | |
1005 | ARRAY_SIZE(bfin_i2c_board_info1)); | |
81d9c7f2 BW |
1006 | #endif |
1007 | ||
24a07a12 | 1008 | platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); |
c6c4d7bb | 1009 | |
5bda2723 | 1010 | spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); |
c6c4d7bb | 1011 | |
24a07a12 RH |
1012 | return 0; |
1013 | } | |
1014 | ||
a01d7a76 | 1015 | arch_initcall(ezkit_init); |