]>
Commit | Line | Data |
---|---|---|
24a07a12 RH |
1 | /* |
2 | * File: arch/blackfin/mach-bf548/boards/ezkit.c | |
3 | * Based on: arch/blackfin/mach-bf537/boards/ezkit.c | |
4 | * Author: Aidan Williams <aidan@nicta.com.au> | |
5 | * | |
6 | * Created: | |
7 | * Description: | |
8 | * | |
9 | * Modified: | |
10 | * Copyright 2005 National ICT Australia (NICTA) | |
11 | * Copyright 2004-2007 Analog Devices Inc. | |
12 | * | |
13 | * Bugs: Enter bugs at http://blackfin.uclinux.org/ | |
14 | * | |
15 | * This program is free software; you can redistribute it and/or modify | |
16 | * it under the terms of the GNU General Public License as published by | |
17 | * the Free Software Foundation; either version 2 of the License, or | |
18 | * (at your option) any later version. | |
19 | * | |
20 | * This program is distributed in the hope that it will be useful, | |
21 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
22 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
23 | * GNU General Public License for more details. | |
24 | * | |
25 | * You should have received a copy of the GNU General Public License | |
26 | * along with this program; if not, see the file COPYING, or write | |
27 | * to the Free Software Foundation, Inc., | |
28 | * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
29 | */ | |
30 | ||
31 | #include <linux/device.h> | |
32 | #include <linux/platform_device.h> | |
33 | #include <linux/mtd/mtd.h> | |
34 | #include <linux/mtd/partitions.h> | |
35 | #include <linux/spi/spi.h> | |
36 | #include <linux/spi/flash.h> | |
1f83b8f1 | 37 | #include <linux/irq.h> |
24a07a12 | 38 | #include <linux/interrupt.h> |
c6c4d7bb | 39 | #include <linux/usb/musb.h> |
24a07a12 | 40 | #include <asm/bfin5xx_spi.h> |
c6c4d7bb BW |
41 | #include <asm/cplb.h> |
42 | #include <asm/dma.h> | |
43 | #include <asm/gpio.h> | |
44 | #include <asm/nand.h> | |
45 | #include <asm/mach/bf54x_keys.h> | |
46 | #include <linux/input.h> | |
47 | #include <linux/spi/ad7877.h> | |
24a07a12 RH |
48 | |
49 | /* | |
50 | * Name the Board for the /proc/cpuinfo | |
51 | */ | |
066954a3 | 52 | const char bfin_board_name[] = "ADSP-BF548-EZKIT"; |
24a07a12 RH |
53 | |
54 | /* | |
55 | * Driver needs to know address, irq and flag pin. | |
56 | */ | |
57 | ||
c6c4d7bb BW |
58 | #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) |
59 | ||
60 | #include <asm/mach/bf54x-lq043.h> | |
61 | ||
62 | static struct bfin_bf54xfb_mach_info bf54x_lq043_data = { | |
63 | .width = 480, | |
64 | .height = 272, | |
65 | .xres = {480, 480, 480}, | |
66 | .yres = {272, 272, 272}, | |
67 | .bpp = {24, 24, 24}, | |
68 | .disp = GPIO_PE3, | |
69 | }; | |
70 | ||
71 | static struct resource bf54x_lq043_resources[] = { | |
72 | { | |
73 | .start = IRQ_EPPI0_ERR, | |
74 | .end = IRQ_EPPI0_ERR, | |
75 | .flags = IORESOURCE_IRQ, | |
76 | }, | |
77 | }; | |
78 | ||
79 | static struct platform_device bf54x_lq043_device = { | |
80 | .name = "bf54x-lq043", | |
81 | .id = -1, | |
82 | .num_resources = ARRAY_SIZE(bf54x_lq043_resources), | |
83 | .resource = bf54x_lq043_resources, | |
84 | .dev = { | |
85 | .platform_data = &bf54x_lq043_data, | |
86 | }, | |
87 | }; | |
88 | #endif | |
89 | ||
90 | #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) | |
8f740ef3 | 91 | static const unsigned int bf548_keymap[] = { |
c6c4d7bb BW |
92 | KEYVAL(0, 0, KEY_ENTER), |
93 | KEYVAL(0, 1, KEY_HELP), | |
94 | KEYVAL(0, 2, KEY_0), | |
95 | KEYVAL(0, 3, KEY_BACKSPACE), | |
96 | KEYVAL(1, 0, KEY_TAB), | |
97 | KEYVAL(1, 1, KEY_9), | |
98 | KEYVAL(1, 2, KEY_8), | |
99 | KEYVAL(1, 3, KEY_7), | |
100 | KEYVAL(2, 0, KEY_DOWN), | |
101 | KEYVAL(2, 1, KEY_6), | |
102 | KEYVAL(2, 2, KEY_5), | |
103 | KEYVAL(2, 3, KEY_4), | |
104 | KEYVAL(3, 0, KEY_UP), | |
105 | KEYVAL(3, 1, KEY_3), | |
106 | KEYVAL(3, 2, KEY_2), | |
107 | KEYVAL(3, 3, KEY_1), | |
108 | }; | |
109 | ||
110 | static struct bfin_kpad_platform_data bf54x_kpad_data = { | |
111 | .rows = 4, | |
112 | .cols = 4, | |
8f740ef3 MH |
113 | .keymap = bf548_keymap, |
114 | .keymapsize = ARRAY_SIZE(bf548_keymap), | |
c6c4d7bb BW |
115 | .repeat = 0, |
116 | .debounce_time = 5000, /* ns (5ms) */ | |
117 | .coldrive_time = 1000, /* ns (1ms) */ | |
118 | .keyup_test_interval = 50, /* ms (50ms) */ | |
119 | }; | |
120 | ||
121 | static struct resource bf54x_kpad_resources[] = { | |
122 | { | |
123 | .start = IRQ_KEY, | |
124 | .end = IRQ_KEY, | |
125 | .flags = IORESOURCE_IRQ, | |
126 | }, | |
127 | }; | |
128 | ||
129 | static struct platform_device bf54x_kpad_device = { | |
130 | .name = "bf54x-keys", | |
131 | .id = -1, | |
132 | .num_resources = ARRAY_SIZE(bf54x_kpad_resources), | |
133 | .resource = bf54x_kpad_resources, | |
134 | .dev = { | |
135 | .platform_data = &bf54x_kpad_data, | |
136 | }, | |
137 | }; | |
138 | #endif | |
139 | ||
24a07a12 RH |
140 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) |
141 | static struct platform_device rtc_device = { | |
142 | .name = "rtc-bfin", | |
143 | .id = -1, | |
144 | }; | |
145 | #endif | |
146 | ||
147 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
148 | static struct resource bfin_uart_resources[] = { | |
149 | #ifdef CONFIG_SERIAL_BFIN_UART0 | |
150 | { | |
151 | .start = 0xFFC00400, | |
152 | .end = 0xFFC004FF, | |
153 | .flags = IORESOURCE_MEM, | |
154 | }, | |
155 | #endif | |
156 | #ifdef CONFIG_SERIAL_BFIN_UART1 | |
157 | { | |
158 | .start = 0xFFC02000, | |
159 | .end = 0xFFC020FF, | |
160 | .flags = IORESOURCE_MEM, | |
161 | }, | |
162 | #endif | |
163 | #ifdef CONFIG_SERIAL_BFIN_UART2 | |
164 | { | |
165 | .start = 0xFFC02100, | |
166 | .end = 0xFFC021FF, | |
167 | .flags = IORESOURCE_MEM, | |
168 | }, | |
169 | #endif | |
170 | #ifdef CONFIG_SERIAL_BFIN_UART3 | |
171 | { | |
172 | .start = 0xFFC03100, | |
173 | .end = 0xFFC031FF, | |
174 | }, | |
175 | #endif | |
176 | }; | |
177 | ||
178 | static struct platform_device bfin_uart_device = { | |
179 | .name = "bfin-uart", | |
180 | .id = 1, | |
181 | .num_resources = ARRAY_SIZE(bfin_uart_resources), | |
182 | .resource = bfin_uart_resources, | |
183 | }; | |
184 | #endif | |
185 | ||
c6c4d7bb BW |
186 | #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) |
187 | static struct resource smsc911x_resources[] = { | |
188 | { | |
189 | .name = "smsc911x-memory", | |
190 | .start = 0x24000000, | |
191 | .end = 0x24000000 + 0xFF, | |
192 | .flags = IORESOURCE_MEM, | |
193 | }, | |
194 | { | |
195 | .start = IRQ_PE8, | |
196 | .end = IRQ_PE8, | |
197 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, | |
198 | }, | |
199 | }; | |
200 | static struct platform_device smsc911x_device = { | |
201 | .name = "smsc911x", | |
202 | .id = 0, | |
203 | .num_resources = ARRAY_SIZE(smsc911x_resources), | |
204 | .resource = smsc911x_resources, | |
205 | }; | |
206 | #endif | |
207 | ||
208 | #if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE) | |
209 | static struct resource bf54x_hcd_resources[] = { | |
210 | { | |
211 | .start = 0xFFC03C00, | |
212 | .end = 0xFFC040FF, | |
213 | .flags = IORESOURCE_MEM, | |
214 | }, | |
215 | }; | |
216 | ||
217 | static struct platform_device bf54x_hcd = { | |
218 | .name = "bf54x-hcd", | |
219 | .id = 0, | |
220 | .num_resources = ARRAY_SIZE(bf54x_hcd_resources), | |
221 | .resource = bf54x_hcd_resources, | |
222 | }; | |
223 | #endif | |
224 | ||
225 | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) | |
226 | static struct resource musb_resources[] = { | |
227 | [0] = { | |
228 | .start = 0xFFC03C00, | |
229 | .end = 0xFFC040FF, | |
230 | .flags = IORESOURCE_MEM, | |
231 | }, | |
232 | [1] = { /* general IRQ */ | |
233 | .start = IRQ_USB_INT0, | |
234 | .end = IRQ_USB_INT0, | |
235 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
236 | }, | |
237 | [2] = { /* DMA IRQ */ | |
238 | .start = IRQ_USB_DMA, | |
239 | .end = IRQ_USB_DMA, | |
240 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
241 | }, | |
242 | }; | |
243 | ||
244 | static struct musb_hdrc_platform_data musb_plat = { | |
245 | #ifdef CONFIG_USB_MUSB_OTG | |
246 | .mode = MUSB_OTG, | |
247 | #elif CONFIG_USB_MUSB_HDRC_HCD | |
248 | .mode = MUSB_HOST, | |
249 | #elif CONFIG_USB_GADGET_MUSB_HDRC | |
250 | .mode = MUSB_PERIPHERAL, | |
251 | #endif | |
252 | .multipoint = 1, | |
253 | }; | |
254 | ||
255 | static u64 musb_dmamask = ~(u32)0; | |
256 | ||
257 | static struct platform_device musb_device = { | |
258 | .name = "musb_hdrc", | |
259 | .id = 0, | |
260 | .dev = { | |
261 | .dma_mask = &musb_dmamask, | |
262 | .coherent_dma_mask = 0xffffffff, | |
263 | .platform_data = &musb_plat, | |
264 | }, | |
265 | .num_resources = ARRAY_SIZE(musb_resources), | |
266 | .resource = musb_resources, | |
267 | }; | |
268 | #endif | |
269 | ||
270 | #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) | |
271 | static struct resource bfin_atapi_resources[] = { | |
272 | { | |
273 | .start = 0xFFC03800, | |
274 | .end = 0xFFC0386F, | |
275 | .flags = IORESOURCE_MEM, | |
276 | }, | |
277 | { | |
278 | .start = IRQ_ATAPI_ERR, | |
279 | .end = IRQ_ATAPI_ERR, | |
280 | .flags = IORESOURCE_IRQ, | |
281 | }, | |
282 | }; | |
283 | ||
284 | static struct platform_device bfin_atapi_device = { | |
285 | .name = "pata-bf54x", | |
286 | .id = -1, | |
287 | .num_resources = ARRAY_SIZE(bfin_atapi_resources), | |
288 | .resource = bfin_atapi_resources, | |
289 | }; | |
290 | #endif | |
291 | ||
292 | #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) | |
293 | static struct mtd_partition partition_info[] = { | |
294 | { | |
295 | .name = "Linux Kernel", | |
296 | .offset = 0, | |
297 | .size = 4 * SIZE_1M, | |
298 | }, | |
299 | { | |
300 | .name = "File System", | |
301 | .offset = 4 * SIZE_1M, | |
302 | .size = (256 - 4) * SIZE_1M, | |
303 | }, | |
304 | }; | |
305 | ||
306 | static struct bf5xx_nand_platform bf5xx_nand_platform = { | |
307 | .page_size = NFC_PG_SIZE_256, | |
308 | .data_width = NFC_NWIDTH_8, | |
309 | .partitions = partition_info, | |
310 | .nr_partitions = ARRAY_SIZE(partition_info), | |
311 | .rd_dly = 3, | |
312 | .wr_dly = 3, | |
313 | }; | |
314 | ||
315 | static struct resource bf5xx_nand_resources[] = { | |
316 | { | |
317 | .start = 0xFFC03B00, | |
318 | .end = 0xFFC03B4F, | |
319 | .flags = IORESOURCE_MEM, | |
320 | }, | |
321 | { | |
322 | .start = CH_NFC, | |
323 | .end = CH_NFC, | |
324 | .flags = IORESOURCE_IRQ, | |
325 | }, | |
326 | }; | |
327 | ||
328 | static struct platform_device bf5xx_nand_device = { | |
329 | .name = "bf5xx-nand", | |
330 | .id = 0, | |
331 | .num_resources = ARRAY_SIZE(bf5xx_nand_resources), | |
332 | .resource = bf5xx_nand_resources, | |
333 | .dev = { | |
334 | .platform_data = &bf5xx_nand_platform, | |
335 | }, | |
336 | }; | |
337 | #endif | |
338 | ||
339 | #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN) | |
340 | static struct platform_device bf54x_sdh_device = { | |
341 | .name = "bfin-sdh", | |
342 | .id = 0, | |
343 | }; | |
344 | #endif | |
345 | ||
346 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | |
347 | /* all SPI peripherals info goes here */ | |
348 | #if defined(CONFIG_MTD_M25P80) \ | |
349 | || defined(CONFIG_MTD_M25P80_MODULE) | |
350 | /* SPI flash chip (m25p16) */ | |
351 | static struct mtd_partition bfin_spi_flash_partitions[] = { | |
352 | { | |
353 | .name = "bootloader", | |
354 | .size = 0x00040000, | |
355 | .offset = 0, | |
356 | .mask_flags = MTD_CAP_ROM | |
357 | }, { | |
358 | .name = "linux kernel", | |
359 | .size = 0x1c0000, | |
360 | .offset = 0x40000 | |
361 | } | |
362 | }; | |
363 | ||
364 | static struct flash_platform_data bfin_spi_flash_data = { | |
365 | .name = "m25p80", | |
366 | .parts = bfin_spi_flash_partitions, | |
367 | .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), | |
368 | .type = "m25p16", | |
369 | }; | |
370 | ||
371 | static struct bfin5xx_spi_chip spi_flash_chip_info = { | |
372 | .enable_dma = 0, /* use dma transfer with this chip*/ | |
373 | .bits_per_word = 8, | |
374 | .cs_change_per_word = 0, | |
375 | }; | |
376 | #endif | |
377 | ||
378 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) | |
379 | static struct bfin5xx_spi_chip spi_ad7877_chip_info = { | |
380 | .cs_change_per_word = 1, | |
381 | .enable_dma = 0, | |
382 | .bits_per_word = 16, | |
383 | }; | |
384 | ||
385 | static const struct ad7877_platform_data bfin_ad7877_ts_info = { | |
386 | .model = 7877, | |
387 | .vref_delay_usecs = 50, /* internal, no capacitor */ | |
388 | .x_plate_ohms = 419, | |
389 | .y_plate_ohms = 486, | |
390 | .pressure_max = 1000, | |
391 | .pressure_min = 0, | |
392 | .stopacq_polarity = 1, | |
393 | .first_conversion_delay = 3, | |
394 | .acquisition_time = 1, | |
395 | .averaging = 1, | |
396 | .pen_down_acc_interval = 1, | |
397 | }; | |
398 | #endif | |
399 | ||
400 | static struct spi_board_info bf54x_spi_board_info[] __initdata = { | |
401 | #if defined(CONFIG_MTD_M25P80) \ | |
402 | || defined(CONFIG_MTD_M25P80_MODULE) | |
403 | { | |
404 | /* the modalias must be the same as spi device driver name */ | |
405 | .modalias = "m25p80", /* Name of spi_driver for this device */ | |
406 | .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ | |
407 | .bus_num = 0, /* Framework bus number */ | |
408 | .chip_select = 1, /* SPI_SSEL1*/ | |
409 | .platform_data = &bfin_spi_flash_data, | |
410 | .controller_data = &spi_flash_chip_info, | |
411 | .mode = SPI_MODE_3, | |
412 | }, | |
413 | #endif | |
414 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) | |
415 | { | |
416 | .modalias = "ad7877", | |
417 | .platform_data = &bfin_ad7877_ts_info, | |
418 | .irq = IRQ_PJ11, | |
419 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | |
420 | .bus_num = 0, | |
421 | .chip_select = 2, | |
422 | .controller_data = &spi_ad7877_chip_info, | |
423 | }, | |
424 | #endif | |
425 | }; | |
426 | ||
427 | /* SPI (0) */ | |
428 | static struct resource bfin_spi0_resource[] = { | |
429 | [0] = { | |
430 | .start = SPI0_REGBASE, | |
431 | .end = SPI0_REGBASE + 0xFF, | |
432 | .flags = IORESOURCE_MEM, | |
433 | }, | |
434 | [1] = { | |
435 | .start = CH_SPI0, | |
436 | .end = CH_SPI0, | |
437 | .flags = IORESOURCE_IRQ, | |
438 | } | |
439 | }; | |
440 | ||
441 | /* SPI (1) */ | |
442 | static struct resource bfin_spi1_resource[] = { | |
443 | [0] = { | |
444 | .start = SPI1_REGBASE, | |
445 | .end = SPI1_REGBASE + 0xFF, | |
446 | .flags = IORESOURCE_MEM, | |
447 | }, | |
448 | [1] = { | |
449 | .start = CH_SPI1, | |
450 | .end = CH_SPI1, | |
451 | .flags = IORESOURCE_IRQ, | |
452 | } | |
453 | }; | |
454 | ||
455 | /* SPI controller data */ | |
456 | static struct bfin5xx_spi_master bf54x_spi_master_info = { | |
457 | .num_chipselect = 8, | |
458 | .enable_dma = 1, /* master has the ability to do dma transfer */ | |
459 | }; | |
460 | ||
461 | static struct platform_device bf54x_spi_master0 = { | |
462 | .name = "bfin-spi", | |
463 | .id = 0, /* Bus number */ | |
464 | .num_resources = ARRAY_SIZE(bfin_spi0_resource), | |
465 | .resource = bfin_spi0_resource, | |
466 | .dev = { | |
467 | .platform_data = &bf54x_spi_master_info, /* Passed to driver */ | |
468 | }, | |
469 | }; | |
470 | ||
471 | static struct platform_device bf54x_spi_master1 = { | |
472 | .name = "bfin-spi", | |
473 | .id = 1, /* Bus number */ | |
474 | .num_resources = ARRAY_SIZE(bfin_spi1_resource), | |
475 | .resource = bfin_spi1_resource, | |
476 | .dev = { | |
477 | .platform_data = &bf54x_spi_master_info, /* Passed to driver */ | |
478 | }, | |
479 | }; | |
480 | #endif /* spi master and devices */ | |
481 | ||
482 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) | |
483 | static struct resource bfin_twi0_resource[] = { | |
484 | [0] = { | |
485 | .start = TWI0_REGBASE, | |
486 | .end = TWI0_REGBASE + 0xFF, | |
487 | .flags = IORESOURCE_MEM, | |
488 | }, | |
489 | [1] = { | |
490 | .start = IRQ_TWI0, | |
491 | .end = IRQ_TWI0, | |
492 | .flags = IORESOURCE_IRQ, | |
493 | }, | |
494 | }; | |
495 | ||
496 | static struct platform_device i2c_bfin_twi0_device = { | |
497 | .name = "i2c-bfin-twi", | |
498 | .id = 0, | |
499 | .num_resources = ARRAY_SIZE(bfin_twi0_resource), | |
500 | .resource = bfin_twi0_resource, | |
501 | }; | |
502 | ||
503 | static struct resource bfin_twi1_resource[] = { | |
504 | [0] = { | |
505 | .start = TWI1_REGBASE, | |
506 | .end = TWI1_REGBASE + 0xFF, | |
507 | .flags = IORESOURCE_MEM, | |
508 | }, | |
509 | [1] = { | |
510 | .start = IRQ_TWI1, | |
511 | .end = IRQ_TWI1, | |
512 | .flags = IORESOURCE_IRQ, | |
513 | }, | |
514 | }; | |
515 | ||
516 | static struct platform_device i2c_bfin_twi1_device = { | |
517 | .name = "i2c-bfin-twi", | |
518 | .id = 1, | |
519 | .num_resources = ARRAY_SIZE(bfin_twi1_resource), | |
520 | .resource = bfin_twi1_resource, | |
521 | }; | |
522 | #endif | |
523 | ||
24a07a12 RH |
524 | static struct platform_device *ezkit_devices[] __initdata = { |
525 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) | |
526 | &rtc_device, | |
527 | #endif | |
528 | ||
529 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
530 | &bfin_uart_device, | |
531 | #endif | |
c6c4d7bb BW |
532 | |
533 | #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) | |
534 | &bf54x_lq043_device, | |
535 | #endif | |
536 | ||
537 | #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) | |
538 | &smsc911x_device, | |
539 | #endif | |
540 | ||
541 | #if defined(CONFIG_USB_BF54x_HCD) || defined(CONFIG_USB_BF54x_HCD_MODULE) | |
542 | &bf54x_hcd, | |
543 | #endif | |
544 | ||
545 | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) | |
546 | &musb_device, | |
547 | #endif | |
548 | ||
549 | #if defined(CONFIG_PATA_BF54X) || defined(CONFIG_PATA_BF54X_MODULE) | |
550 | &bfin_atapi_device, | |
551 | #endif | |
552 | ||
553 | #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) | |
554 | &bf5xx_nand_device, | |
555 | #endif | |
556 | ||
557 | #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN) | |
558 | &bf54x_sdh_device, | |
559 | #endif | |
560 | ||
561 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | |
562 | &bf54x_spi_master0, | |
d4b1d273 | 563 | &bf54x_spi_master1, |
c6c4d7bb BW |
564 | #endif |
565 | ||
566 | #if defined(CONFIG_KEYBOARD_BFIN) || defined(CONFIG_KEYBOARD_BFIN_MODULE) | |
567 | &bf54x_kpad_device, | |
568 | #endif | |
569 | ||
570 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) | |
571 | &i2c_bfin_twi0_device, | |
572 | &i2c_bfin_twi1_device, | |
573 | #endif | |
24a07a12 RH |
574 | }; |
575 | ||
576 | static int __init stamp_init(void) | |
577 | { | |
578 | printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); | |
579 | platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); | |
c6c4d7bb BW |
580 | |
581 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | |
582 | spi_register_board_info(bf54x_spi_board_info, | |
583 | ARRAY_SIZE(bf54x_spi_board_info)); | |
584 | #endif | |
585 | ||
24a07a12 RH |
586 | return 0; |
587 | } | |
588 | ||
589 | arch_initcall(stamp_init); |