]>
Commit | Line | Data |
---|---|---|
9db144fe MH |
1 | /* |
2 | * File: arch/blackfin/mach-bf527/boards/cm-bf527.c | |
3 | * Based on: arch/blackfin/mach-bf537/boards/stamp.c | |
4 | * Author: Aidan Williams <aidan@nicta.com.au> | |
5 | * | |
6 | * Created: | |
7 | * Description: | |
8 | * | |
9 | * Modified: | |
10 | * Copyright 2005 National ICT Australia (NICTA) | |
11 | * Copyright 2004-2008 Analog Devices Inc. | |
12 | * | |
13 | * Bugs: Enter bugs at http://blackfin.uclinux.org/ | |
14 | * | |
15 | * This program is free software; you can redistribute it and/or modify | |
16 | * it under the terms of the GNU General Public License as published by | |
17 | * the Free Software Foundation; either version 2 of the License, or | |
18 | * (at your option) any later version. | |
19 | * | |
20 | * This program is distributed in the hope that it will be useful, | |
21 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
22 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
23 | * GNU General Public License for more details. | |
24 | * | |
25 | * You should have received a copy of the GNU General Public License | |
26 | * along with this program; if not, see the file COPYING, or write | |
27 | * to the Free Software Foundation, Inc., | |
28 | * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
29 | */ | |
30 | ||
31 | #include <linux/device.h> | |
32 | #include <linux/platform_device.h> | |
33 | #include <linux/mtd/mtd.h> | |
34 | #include <linux/mtd/partitions.h> | |
35 | #include <linux/mtd/physmap.h> | |
36 | #include <linux/spi/spi.h> | |
37 | #include <linux/spi/flash.h> | |
38 | #include <linux/etherdevice.h> | |
39 | #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) | |
40 | #include <linux/usb/isp1362.h> | |
41 | #endif | |
9db144fe MH |
42 | #include <linux/i2c.h> |
43 | #include <linux/irq.h> | |
44 | #include <linux/interrupt.h> | |
45 | #include <linux/usb/sl811.h> | |
9db144fe | 46 | #include <linux/usb/musb.h> |
9db144fe MH |
47 | #include <asm/dma.h> |
48 | #include <asm/bfin5xx_spi.h> | |
49 | #include <asm/reboot.h> | |
50 | #include <asm/nand.h> | |
51 | #include <asm/portmux.h> | |
52 | #include <asm/dpmc.h> | |
53 | #include <linux/spi/ad7877.h> | |
54 | ||
55 | /* | |
56 | * Name the Board for the /proc/cpuinfo | |
57 | */ | |
58 | const char bfin_board_name[] = "Bluetechnix CM-BF527"; | |
59 | ||
60 | /* | |
61 | * Driver needs to know address, irq and flag pin. | |
62 | */ | |
63 | ||
9db144fe | 64 | #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) |
3f375690 MH |
65 | #include <linux/usb/isp1760.h> |
66 | static struct resource bfin_isp1760_resources[] = { | |
9db144fe | 67 | [0] = { |
3f375690 MH |
68 | .start = 0x203C0000, |
69 | .end = 0x203C0000 + 0x000fffff, | |
9db144fe MH |
70 | .flags = IORESOURCE_MEM, |
71 | }, | |
72 | [1] = { | |
3f375690 MH |
73 | .start = IRQ_PF7, |
74 | .end = IRQ_PF7, | |
9db144fe MH |
75 | .flags = IORESOURCE_IRQ, |
76 | }, | |
77 | }; | |
78 | ||
3f375690 MH |
79 | static struct isp1760_platform_data isp1760_priv = { |
80 | .is_isp1761 = 0, | |
81 | .port1_disable = 0, | |
82 | .bus_width_16 = 1, | |
83 | .port1_otg = 0, | |
84 | .analog_oc = 0, | |
85 | .dack_polarity_high = 0, | |
86 | .dreq_polarity_high = 0, | |
9db144fe MH |
87 | }; |
88 | ||
3f375690 MH |
89 | static struct platform_device bfin_isp1760_device = { |
90 | .name = "isp1760-hcd", | |
91 | .id = 0, | |
92 | .dev = { | |
93 | .platform_data = &isp1760_priv, | |
94 | }, | |
95 | .num_resources = ARRAY_SIZE(bfin_isp1760_resources), | |
96 | .resource = bfin_isp1760_resources, | |
9db144fe | 97 | }; |
9db144fe MH |
98 | #endif |
99 | ||
100 | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) | |
101 | static struct resource musb_resources[] = { | |
102 | [0] = { | |
103 | .start = 0xffc03800, | |
104 | .end = 0xffc03cff, | |
105 | .flags = IORESOURCE_MEM, | |
106 | }, | |
107 | [1] = { /* general IRQ */ | |
108 | .start = IRQ_USB_INT0, | |
109 | .end = IRQ_USB_INT0, | |
110 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
111 | }, | |
112 | [2] = { /* DMA IRQ */ | |
113 | .start = IRQ_USB_DMA, | |
114 | .end = IRQ_USB_DMA, | |
115 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
116 | }, | |
117 | }; | |
118 | ||
50041acb BW |
119 | static struct musb_hdrc_config musb_config = { |
120 | .multipoint = 0, | |
121 | .dyn_fifo = 0, | |
122 | .soft_con = 1, | |
123 | .dma = 1, | |
fea05dac BW |
124 | .num_eps = 8, |
125 | .dma_channels = 8, | |
50041acb BW |
126 | .gpio_vrsel = GPIO_PF11, |
127 | }; | |
128 | ||
9db144fe MH |
129 | static struct musb_hdrc_platform_data musb_plat = { |
130 | #if defined(CONFIG_USB_MUSB_OTG) | |
131 | .mode = MUSB_OTG, | |
132 | #elif defined(CONFIG_USB_MUSB_HDRC_HCD) | |
133 | .mode = MUSB_HOST, | |
134 | #elif defined(CONFIG_USB_GADGET_MUSB_HDRC) | |
135 | .mode = MUSB_PERIPHERAL, | |
136 | #endif | |
50041acb | 137 | .config = &musb_config, |
9db144fe MH |
138 | }; |
139 | ||
140 | static u64 musb_dmamask = ~(u32)0; | |
141 | ||
142 | static struct platform_device musb_device = { | |
143 | .name = "musb_hdrc", | |
144 | .id = 0, | |
145 | .dev = { | |
146 | .dma_mask = &musb_dmamask, | |
147 | .coherent_dma_mask = 0xffffffff, | |
148 | .platform_data = &musb_plat, | |
149 | }, | |
150 | .num_resources = ARRAY_SIZE(musb_resources), | |
151 | .resource = musb_resources, | |
152 | }; | |
153 | #endif | |
154 | ||
155 | #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) | |
156 | static struct mtd_partition ezkit_partitions[] = { | |
157 | { | |
aa582977 | 158 | .name = "bootloader(nor)", |
9db144fe MH |
159 | .size = 0x40000, |
160 | .offset = 0, | |
161 | }, { | |
aa582977 | 162 | .name = "linux kernel(nor)", |
9db144fe MH |
163 | .size = 0x1C0000, |
164 | .offset = MTDPART_OFS_APPEND, | |
165 | }, { | |
aa582977 | 166 | .name = "file system(nor)", |
9db144fe MH |
167 | .size = MTDPART_SIZ_FULL, |
168 | .offset = MTDPART_OFS_APPEND, | |
169 | } | |
170 | }; | |
171 | ||
172 | static struct physmap_flash_data ezkit_flash_data = { | |
173 | .width = 2, | |
174 | .parts = ezkit_partitions, | |
175 | .nr_parts = ARRAY_SIZE(ezkit_partitions), | |
176 | }; | |
177 | ||
178 | static struct resource ezkit_flash_resource = { | |
179 | .start = 0x20000000, | |
180 | .end = 0x201fffff, | |
181 | .flags = IORESOURCE_MEM, | |
182 | }; | |
183 | ||
184 | static struct platform_device ezkit_flash_device = { | |
185 | .name = "physmap-flash", | |
186 | .id = 0, | |
187 | .dev = { | |
188 | .platform_data = &ezkit_flash_data, | |
189 | }, | |
190 | .num_resources = 1, | |
191 | .resource = &ezkit_flash_resource, | |
192 | }; | |
193 | #endif | |
194 | ||
195 | #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) | |
196 | static struct mtd_partition partition_info[] = { | |
197 | { | |
aa582977 | 198 | .name = "linux kernel(nand)", |
9db144fe | 199 | .offset = 0, |
f4585a08 | 200 | .size = 4 * 1024 * 1024, |
9db144fe MH |
201 | }, |
202 | { | |
aa582977 | 203 | .name = "file system(nand)", |
9db144fe MH |
204 | .offset = MTDPART_OFS_APPEND, |
205 | .size = MTDPART_SIZ_FULL, | |
206 | }, | |
207 | }; | |
208 | ||
209 | static struct bf5xx_nand_platform bf5xx_nand_platform = { | |
210 | .page_size = NFC_PG_SIZE_256, | |
211 | .data_width = NFC_NWIDTH_8, | |
212 | .partitions = partition_info, | |
213 | .nr_partitions = ARRAY_SIZE(partition_info), | |
214 | .rd_dly = 3, | |
215 | .wr_dly = 3, | |
216 | }; | |
217 | ||
218 | static struct resource bf5xx_nand_resources[] = { | |
219 | { | |
220 | .start = NFC_CTL, | |
221 | .end = NFC_DATA_RD + 2, | |
222 | .flags = IORESOURCE_MEM, | |
223 | }, | |
224 | { | |
225 | .start = CH_NFC, | |
226 | .end = CH_NFC, | |
227 | .flags = IORESOURCE_IRQ, | |
228 | }, | |
229 | }; | |
230 | ||
231 | static struct platform_device bf5xx_nand_device = { | |
232 | .name = "bf5xx-nand", | |
233 | .id = 0, | |
234 | .num_resources = ARRAY_SIZE(bf5xx_nand_resources), | |
235 | .resource = bf5xx_nand_resources, | |
236 | .dev = { | |
237 | .platform_data = &bf5xx_nand_platform, | |
238 | }, | |
239 | }; | |
240 | #endif | |
241 | ||
242 | #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) | |
243 | static struct resource bfin_pcmcia_cf_resources[] = { | |
244 | { | |
245 | .start = 0x20310000, /* IO PORT */ | |
246 | .end = 0x20312000, | |
247 | .flags = IORESOURCE_MEM, | |
248 | }, { | |
249 | .start = 0x20311000, /* Attribute Memory */ | |
250 | .end = 0x20311FFF, | |
251 | .flags = IORESOURCE_MEM, | |
252 | }, { | |
253 | .start = IRQ_PF4, | |
254 | .end = IRQ_PF4, | |
255 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, | |
256 | }, { | |
257 | .start = 6, /* Card Detect PF6 */ | |
258 | .end = 6, | |
259 | .flags = IORESOURCE_IRQ, | |
260 | }, | |
261 | }; | |
262 | ||
263 | static struct platform_device bfin_pcmcia_cf_device = { | |
264 | .name = "bfin_cf_pcmcia", | |
265 | .id = -1, | |
266 | .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), | |
267 | .resource = bfin_pcmcia_cf_resources, | |
268 | }; | |
269 | #endif | |
270 | ||
271 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) | |
272 | static struct platform_device rtc_device = { | |
273 | .name = "rtc-bfin", | |
274 | .id = -1, | |
275 | }; | |
276 | #endif | |
277 | ||
278 | #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) | |
279 | static struct resource smc91x_resources[] = { | |
280 | { | |
281 | .name = "smc91x-regs", | |
282 | .start = 0x20300300, | |
283 | .end = 0x20300300 + 16, | |
284 | .flags = IORESOURCE_MEM, | |
285 | }, { | |
286 | ||
287 | .start = IRQ_PF7, | |
288 | .end = IRQ_PF7, | |
289 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
290 | }, | |
291 | }; | |
292 | static struct platform_device smc91x_device = { | |
293 | .name = "smc91x", | |
294 | .id = 0, | |
295 | .num_resources = ARRAY_SIZE(smc91x_resources), | |
296 | .resource = smc91x_resources, | |
297 | }; | |
298 | #endif | |
299 | ||
300 | #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) | |
301 | static struct resource dm9000_resources[] = { | |
302 | [0] = { | |
303 | .start = 0x203FB800, | |
304 | .end = 0x203FB800 + 8, | |
305 | .flags = IORESOURCE_MEM, | |
306 | }, | |
307 | [1] = { | |
308 | .start = IRQ_PF9, | |
309 | .end = IRQ_PF9, | |
310 | .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE), | |
311 | }, | |
312 | }; | |
313 | ||
314 | static struct platform_device dm9000_device = { | |
315 | .name = "dm9000", | |
316 | .id = -1, | |
317 | .num_resources = ARRAY_SIZE(dm9000_resources), | |
318 | .resource = dm9000_resources, | |
319 | }; | |
320 | #endif | |
321 | ||
322 | #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) | |
323 | static struct resource sl811_hcd_resources[] = { | |
324 | { | |
325 | .start = 0x20340000, | |
326 | .end = 0x20340000, | |
327 | .flags = IORESOURCE_MEM, | |
328 | }, { | |
329 | .start = 0x20340004, | |
330 | .end = 0x20340004, | |
331 | .flags = IORESOURCE_MEM, | |
332 | }, { | |
333 | .start = CONFIG_USB_SL811_BFIN_IRQ, | |
334 | .end = CONFIG_USB_SL811_BFIN_IRQ, | |
335 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
336 | }, | |
337 | }; | |
338 | ||
339 | #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) | |
340 | void sl811_port_power(struct device *dev, int is_on) | |
341 | { | |
342 | gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); | |
343 | gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); | |
344 | } | |
345 | #endif | |
346 | ||
347 | static struct sl811_platform_data sl811_priv = { | |
348 | .potpg = 10, | |
349 | .power = 250, /* == 500mA */ | |
350 | #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) | |
351 | .port_power = &sl811_port_power, | |
352 | #endif | |
353 | }; | |
354 | ||
355 | static struct platform_device sl811_hcd_device = { | |
356 | .name = "sl811-hcd", | |
357 | .id = 0, | |
358 | .dev = { | |
359 | .platform_data = &sl811_priv, | |
360 | }, | |
361 | .num_resources = ARRAY_SIZE(sl811_hcd_resources), | |
362 | .resource = sl811_hcd_resources, | |
363 | }; | |
364 | #endif | |
365 | ||
366 | #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) | |
367 | static struct resource isp1362_hcd_resources[] = { | |
368 | { | |
369 | .start = 0x20360000, | |
370 | .end = 0x20360000, | |
371 | .flags = IORESOURCE_MEM, | |
372 | }, { | |
373 | .start = 0x20360004, | |
374 | .end = 0x20360004, | |
375 | .flags = IORESOURCE_MEM, | |
376 | }, { | |
377 | .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, | |
378 | .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, | |
379 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
380 | }, | |
381 | }; | |
382 | ||
383 | static struct isp1362_platform_data isp1362_priv = { | |
384 | .sel15Kres = 1, | |
385 | .clknotstop = 0, | |
386 | .oc_enable = 0, | |
387 | .int_act_high = 0, | |
388 | .int_edge_triggered = 0, | |
389 | .remote_wakeup_connected = 0, | |
390 | .no_power_switching = 1, | |
391 | .power_switching_mode = 0, | |
392 | }; | |
393 | ||
394 | static struct platform_device isp1362_hcd_device = { | |
395 | .name = "isp1362-hcd", | |
396 | .id = 0, | |
397 | .dev = { | |
398 | .platform_data = &isp1362_priv, | |
399 | }, | |
400 | .num_resources = ARRAY_SIZE(isp1362_hcd_resources), | |
401 | .resource = isp1362_hcd_resources, | |
402 | }; | |
403 | #endif | |
404 | ||
405 | #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) | |
406 | static struct platform_device bfin_mac_device = { | |
407 | .name = "bfin_mac", | |
408 | }; | |
409 | #endif | |
410 | ||
411 | #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) | |
412 | static struct resource net2272_bfin_resources[] = { | |
413 | { | |
414 | .start = 0x20300000, | |
415 | .end = 0x20300000 + 0x100, | |
416 | .flags = IORESOURCE_MEM, | |
417 | }, { | |
418 | .start = IRQ_PF7, | |
419 | .end = IRQ_PF7, | |
420 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
421 | }, | |
422 | }; | |
423 | ||
424 | static struct platform_device net2272_bfin_device = { | |
425 | .name = "net2272", | |
426 | .id = -1, | |
427 | .num_resources = ARRAY_SIZE(net2272_bfin_resources), | |
428 | .resource = net2272_bfin_resources, | |
429 | }; | |
430 | #endif | |
431 | ||
432 | #if defined(CONFIG_MTD_M25P80) \ | |
433 | || defined(CONFIG_MTD_M25P80_MODULE) | |
434 | static struct mtd_partition bfin_spi_flash_partitions[] = { | |
435 | { | |
aa582977 | 436 | .name = "bootloader(spi)", |
9db144fe MH |
437 | .size = 0x00040000, |
438 | .offset = 0, | |
439 | .mask_flags = MTD_CAP_ROM | |
440 | }, { | |
aa582977 | 441 | .name = "linux kernel(spi)", |
9db144fe MH |
442 | .size = MTDPART_SIZ_FULL, |
443 | .offset = MTDPART_OFS_APPEND, | |
444 | } | |
445 | }; | |
446 | ||
447 | static struct flash_platform_data bfin_spi_flash_data = { | |
448 | .name = "m25p80", | |
449 | .parts = bfin_spi_flash_partitions, | |
450 | .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), | |
451 | .type = "m25p16", | |
452 | }; | |
453 | ||
454 | /* SPI flash chip (m25p64) */ | |
455 | static struct bfin5xx_spi_chip spi_flash_chip_info = { | |
456 | .enable_dma = 0, /* use dma transfer with this chip*/ | |
457 | .bits_per_word = 8, | |
458 | }; | |
459 | #endif | |
460 | ||
461 | #if defined(CONFIG_SPI_ADC_BF533) \ | |
462 | || defined(CONFIG_SPI_ADC_BF533_MODULE) | |
463 | /* SPI ADC chip */ | |
464 | static struct bfin5xx_spi_chip spi_adc_chip_info = { | |
465 | .enable_dma = 1, /* use dma transfer with this chip*/ | |
466 | .bits_per_word = 16, | |
467 | }; | |
468 | #endif | |
469 | ||
470 | #if defined(CONFIG_SND_BLACKFIN_AD1836) \ | |
471 | || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) | |
472 | static struct bfin5xx_spi_chip ad1836_spi_chip_info = { | |
473 | .enable_dma = 0, | |
474 | .bits_per_word = 16, | |
475 | }; | |
476 | #endif | |
477 | ||
478 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | |
479 | static struct bfin5xx_spi_chip ad9960_spi_chip_info = { | |
480 | .enable_dma = 0, | |
481 | .bits_per_word = 16, | |
482 | }; | |
483 | #endif | |
484 | ||
485 | #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) | |
486 | static struct bfin5xx_spi_chip spi_mmc_chip_info = { | |
487 | .enable_dma = 1, | |
488 | .bits_per_word = 8, | |
489 | }; | |
490 | #endif | |
491 | ||
492 | #if defined(CONFIG_PBX) | |
493 | static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { | |
494 | .ctl_reg = 0x4, /* send zero */ | |
495 | .enable_dma = 0, | |
496 | .bits_per_word = 8, | |
497 | .cs_change_per_word = 1, | |
498 | }; | |
499 | #endif | |
500 | ||
501 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) | |
502 | static struct bfin5xx_spi_chip spi_ad7877_chip_info = { | |
503 | .enable_dma = 0, | |
504 | .bits_per_word = 16, | |
505 | }; | |
506 | ||
507 | static const struct ad7877_platform_data bfin_ad7877_ts_info = { | |
508 | .model = 7877, | |
509 | .vref_delay_usecs = 50, /* internal, no capacitor */ | |
510 | .x_plate_ohms = 419, | |
511 | .y_plate_ohms = 486, | |
512 | .pressure_max = 1000, | |
513 | .pressure_min = 0, | |
514 | .stopacq_polarity = 1, | |
515 | .first_conversion_delay = 3, | |
516 | .acquisition_time = 1, | |
517 | .averaging = 1, | |
518 | .pen_down_acc_interval = 1, | |
519 | }; | |
520 | #endif | |
521 | ||
522 | #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ | |
523 | && defined(CONFIG_SND_SOC_WM8731_SPI) | |
524 | static struct bfin5xx_spi_chip spi_wm8731_chip_info = { | |
525 | .enable_dma = 0, | |
526 | .bits_per_word = 16, | |
527 | }; | |
528 | #endif | |
529 | ||
530 | #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) | |
531 | static struct bfin5xx_spi_chip spidev_chip_info = { | |
532 | .enable_dma = 0, | |
533 | .bits_per_word = 8, | |
534 | }; | |
535 | #endif | |
536 | ||
537 | static struct spi_board_info bfin_spi_board_info[] __initdata = { | |
538 | #if defined(CONFIG_MTD_M25P80) \ | |
539 | || defined(CONFIG_MTD_M25P80_MODULE) | |
540 | { | |
541 | /* the modalias must be the same as spi device driver name */ | |
542 | .modalias = "m25p80", /* Name of spi_driver for this device */ | |
543 | .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ | |
544 | .bus_num = 0, /* Framework bus number */ | |
545 | .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ | |
546 | .platform_data = &bfin_spi_flash_data, | |
547 | .controller_data = &spi_flash_chip_info, | |
548 | .mode = SPI_MODE_3, | |
549 | }, | |
550 | #endif | |
551 | ||
552 | #if defined(CONFIG_SPI_ADC_BF533) \ | |
553 | || defined(CONFIG_SPI_ADC_BF533_MODULE) | |
554 | { | |
555 | .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ | |
556 | .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ | |
557 | .bus_num = 0, /* Framework bus number */ | |
558 | .chip_select = 1, /* Framework chip select. */ | |
559 | .platform_data = NULL, /* No spi_driver specific config */ | |
560 | .controller_data = &spi_adc_chip_info, | |
561 | }, | |
562 | #endif | |
563 | ||
564 | #if defined(CONFIG_SND_BLACKFIN_AD1836) \ | |
565 | || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) | |
566 | { | |
567 | .modalias = "ad1836-spi", | |
568 | .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ | |
569 | .bus_num = 0, | |
570 | .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, | |
571 | .controller_data = &ad1836_spi_chip_info, | |
572 | }, | |
573 | #endif | |
574 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | |
575 | { | |
576 | .modalias = "ad9960-spi", | |
577 | .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ | |
578 | .bus_num = 0, | |
579 | .chip_select = 1, | |
580 | .controller_data = &ad9960_spi_chip_info, | |
581 | }, | |
582 | #endif | |
583 | #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) | |
584 | { | |
585 | .modalias = "spi_mmc_dummy", | |
586 | .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ | |
587 | .bus_num = 0, | |
588 | .chip_select = 0, | |
589 | .platform_data = NULL, | |
590 | .controller_data = &spi_mmc_chip_info, | |
591 | .mode = SPI_MODE_3, | |
592 | }, | |
593 | { | |
594 | .modalias = "spi_mmc", | |
595 | .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ | |
596 | .bus_num = 0, | |
597 | .chip_select = CONFIG_SPI_MMC_CS_CHAN, | |
598 | .platform_data = NULL, | |
599 | .controller_data = &spi_mmc_chip_info, | |
600 | .mode = SPI_MODE_3, | |
601 | }, | |
602 | #endif | |
603 | #if defined(CONFIG_PBX) | |
604 | { | |
605 | .modalias = "fxs-spi", | |
606 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | |
607 | .bus_num = 0, | |
608 | .chip_select = 8 - CONFIG_J11_JUMPER, | |
609 | .controller_data = &spi_si3xxx_chip_info, | |
610 | .mode = SPI_MODE_3, | |
611 | }, | |
612 | { | |
613 | .modalias = "fxo-spi", | |
614 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | |
615 | .bus_num = 0, | |
616 | .chip_select = 8 - CONFIG_J19_JUMPER, | |
617 | .controller_data = &spi_si3xxx_chip_info, | |
618 | .mode = SPI_MODE_3, | |
619 | }, | |
620 | #endif | |
621 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) | |
622 | { | |
623 | .modalias = "ad7877", | |
624 | .platform_data = &bfin_ad7877_ts_info, | |
625 | .irq = IRQ_PF8, | |
626 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | |
627 | .bus_num = 0, | |
628 | .chip_select = 2, | |
629 | .controller_data = &spi_ad7877_chip_info, | |
630 | }, | |
631 | #endif | |
632 | #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ | |
633 | && defined(CONFIG_SND_SOC_WM8731_SPI) | |
634 | { | |
635 | .modalias = "wm8731", | |
636 | .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ | |
637 | .bus_num = 0, | |
638 | .chip_select = 5, | |
639 | .controller_data = &spi_wm8731_chip_info, | |
640 | .mode = SPI_MODE_0, | |
641 | }, | |
642 | #endif | |
643 | #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) | |
644 | { | |
645 | .modalias = "spidev", | |
646 | .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ | |
647 | .bus_num = 0, | |
648 | .chip_select = 1, | |
649 | .controller_data = &spidev_chip_info, | |
650 | }, | |
651 | #endif | |
652 | }; | |
653 | ||
654 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | |
655 | /* SPI controller data */ | |
656 | static struct bfin5xx_spi_master bfin_spi0_info = { | |
657 | .num_chipselect = 8, | |
658 | .enable_dma = 1, /* master has the ability to do dma transfer */ | |
659 | .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, | |
660 | }; | |
661 | ||
662 | /* SPI (0) */ | |
663 | static struct resource bfin_spi0_resource[] = { | |
664 | [0] = { | |
665 | .start = SPI0_REGBASE, | |
666 | .end = SPI0_REGBASE + 0xFF, | |
667 | .flags = IORESOURCE_MEM, | |
668 | }, | |
669 | [1] = { | |
670 | .start = CH_SPI, | |
671 | .end = CH_SPI, | |
672 | .flags = IORESOURCE_IRQ, | |
673 | }, | |
674 | }; | |
675 | ||
676 | static struct platform_device bfin_spi0_device = { | |
677 | .name = "bfin-spi", | |
678 | .id = 0, /* Bus number */ | |
679 | .num_resources = ARRAY_SIZE(bfin_spi0_resource), | |
680 | .resource = bfin_spi0_resource, | |
681 | .dev = { | |
682 | .platform_data = &bfin_spi0_info, /* Passed to driver */ | |
683 | }, | |
684 | }; | |
685 | #endif /* spi master and devices */ | |
686 | ||
687 | #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) | |
688 | static struct platform_device bfin_fb_adv7393_device = { | |
689 | .name = "bfin-adv7393", | |
690 | }; | |
691 | #endif | |
692 | ||
693 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
694 | static struct resource bfin_uart_resources[] = { | |
695 | #ifdef CONFIG_SERIAL_BFIN_UART0 | |
696 | { | |
697 | .start = 0xFFC00400, | |
698 | .end = 0xFFC004FF, | |
699 | .flags = IORESOURCE_MEM, | |
700 | }, | |
701 | #endif | |
702 | #ifdef CONFIG_SERIAL_BFIN_UART1 | |
703 | { | |
704 | .start = 0xFFC02000, | |
705 | .end = 0xFFC020FF, | |
706 | .flags = IORESOURCE_MEM, | |
707 | }, | |
708 | #endif | |
709 | }; | |
710 | ||
711 | static struct platform_device bfin_uart_device = { | |
712 | .name = "bfin-uart", | |
713 | .id = 1, | |
714 | .num_resources = ARRAY_SIZE(bfin_uart_resources), | |
715 | .resource = bfin_uart_resources, | |
716 | }; | |
717 | #endif | |
718 | ||
719 | #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) | |
9db144fe | 720 | #ifdef CONFIG_BFIN_SIR0 |
42bd8bcb | 721 | static struct resource bfin_sir0_resources[] = { |
9db144fe MH |
722 | { |
723 | .start = 0xFFC00400, | |
724 | .end = 0xFFC004FF, | |
725 | .flags = IORESOURCE_MEM, | |
726 | }, | |
42bd8bcb GY |
727 | { |
728 | .start = IRQ_UART0_RX, | |
729 | .end = IRQ_UART0_RX+1, | |
730 | .flags = IORESOURCE_IRQ, | |
731 | }, | |
732 | { | |
733 | .start = CH_UART0_RX, | |
734 | .end = CH_UART0_RX+1, | |
735 | .flags = IORESOURCE_DMA, | |
736 | }, | |
737 | }; | |
738 | ||
739 | static struct platform_device bfin_sir0_device = { | |
740 | .name = "bfin_sir", | |
741 | .id = 0, | |
742 | .num_resources = ARRAY_SIZE(bfin_sir0_resources), | |
743 | .resource = bfin_sir0_resources, | |
744 | }; | |
9db144fe MH |
745 | #endif |
746 | #ifdef CONFIG_BFIN_SIR1 | |
42bd8bcb | 747 | static struct resource bfin_sir1_resources[] = { |
9db144fe MH |
748 | { |
749 | .start = 0xFFC02000, | |
750 | .end = 0xFFC020FF, | |
751 | .flags = IORESOURCE_MEM, | |
752 | }, | |
42bd8bcb GY |
753 | { |
754 | .start = IRQ_UART1_RX, | |
755 | .end = IRQ_UART1_RX+1, | |
756 | .flags = IORESOURCE_IRQ, | |
757 | }, | |
758 | { | |
759 | .start = CH_UART1_RX, | |
760 | .end = CH_UART1_RX+1, | |
761 | .flags = IORESOURCE_DMA, | |
762 | }, | |
9db144fe MH |
763 | }; |
764 | ||
42bd8bcb | 765 | static struct platform_device bfin_sir1_device = { |
9db144fe | 766 | .name = "bfin_sir", |
42bd8bcb GY |
767 | .id = 1, |
768 | .num_resources = ARRAY_SIZE(bfin_sir1_resources), | |
769 | .resource = bfin_sir1_resources, | |
9db144fe MH |
770 | }; |
771 | #endif | |
42bd8bcb | 772 | #endif |
9db144fe MH |
773 | |
774 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) | |
775 | static struct resource bfin_twi0_resource[] = { | |
776 | [0] = { | |
777 | .start = TWI0_REGBASE, | |
778 | .end = TWI0_REGBASE, | |
779 | .flags = IORESOURCE_MEM, | |
780 | }, | |
781 | [1] = { | |
782 | .start = IRQ_TWI, | |
783 | .end = IRQ_TWI, | |
784 | .flags = IORESOURCE_IRQ, | |
785 | }, | |
786 | }; | |
787 | ||
788 | static struct platform_device i2c_bfin_twi_device = { | |
789 | .name = "i2c-bfin-twi", | |
790 | .id = 0, | |
791 | .num_resources = ARRAY_SIZE(bfin_twi0_resource), | |
792 | .resource = bfin_twi0_resource, | |
793 | }; | |
794 | #endif | |
795 | ||
796 | #ifdef CONFIG_I2C_BOARDINFO | |
797 | static struct i2c_board_info __initdata bfin_i2c_board_info[] = { | |
798 | #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) | |
799 | { | |
800 | I2C_BOARD_INFO("pcf8574_lcd", 0x22), | |
801 | .type = "pcf8574_lcd", | |
802 | }, | |
803 | #endif | |
804 | #if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE) | |
805 | { | |
806 | I2C_BOARD_INFO("pcf8574_keypad", 0x27), | |
807 | .type = "pcf8574_keypad", | |
808 | .irq = IRQ_PF8, | |
809 | }, | |
810 | #endif | |
811 | }; | |
812 | #endif | |
813 | ||
814 | #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) | |
815 | static struct platform_device bfin_sport0_uart_device = { | |
816 | .name = "bfin-sport-uart", | |
817 | .id = 0, | |
818 | }; | |
819 | ||
820 | static struct platform_device bfin_sport1_uart_device = { | |
821 | .name = "bfin-sport-uart", | |
822 | .id = 1, | |
823 | }; | |
824 | #endif | |
825 | ||
9db144fe MH |
826 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) |
827 | #include <linux/input.h> | |
828 | #include <linux/gpio_keys.h> | |
829 | ||
830 | static struct gpio_keys_button bfin_gpio_keys_table[] = { | |
831 | {BTN_0, GPIO_PF14, 1, "gpio-keys: BTN0"}, | |
832 | }; | |
833 | ||
834 | static struct gpio_keys_platform_data bfin_gpio_keys_data = { | |
835 | .buttons = bfin_gpio_keys_table, | |
836 | .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), | |
837 | }; | |
838 | ||
839 | static struct platform_device bfin_device_gpiokeys = { | |
840 | .name = "gpio-keys", | |
841 | .dev = { | |
842 | .platform_data = &bfin_gpio_keys_data, | |
843 | }, | |
844 | }; | |
845 | #endif | |
846 | ||
847 | static struct resource bfin_gpios_resources = { | |
848 | .start = 0, | |
849 | .end = MAX_BLACKFIN_GPIOS - 1, | |
850 | .flags = IORESOURCE_IRQ, | |
851 | }; | |
852 | ||
853 | static struct platform_device bfin_gpios_device = { | |
854 | .name = "simple-gpio", | |
855 | .id = -1, | |
856 | .num_resources = 1, | |
857 | .resource = &bfin_gpios_resources, | |
858 | }; | |
859 | ||
860 | static const unsigned int cclk_vlev_datasheet[] = | |
861 | { | |
862 | VRPAIR(VLEV_100, 400000000), | |
863 | VRPAIR(VLEV_105, 426000000), | |
864 | VRPAIR(VLEV_110, 500000000), | |
865 | VRPAIR(VLEV_115, 533000000), | |
866 | VRPAIR(VLEV_120, 600000000), | |
867 | }; | |
868 | ||
869 | static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { | |
870 | .tuple_tab = cclk_vlev_datasheet, | |
871 | .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), | |
872 | .vr_settling_time = 25 /* us */, | |
873 | }; | |
874 | ||
875 | static struct platform_device bfin_dpmc = { | |
876 | .name = "bfin dpmc", | |
877 | .dev = { | |
878 | .platform_data = &bfin_dmpc_vreg_data, | |
879 | }, | |
880 | }; | |
881 | ||
882 | static struct platform_device *stamp_devices[] __initdata = { | |
883 | ||
884 | &bfin_dpmc, | |
885 | ||
886 | #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) | |
887 | &bf5xx_nand_device, | |
888 | #endif | |
889 | ||
890 | #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) | |
891 | &bfin_pcmcia_cf_device, | |
892 | #endif | |
893 | ||
894 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) | |
895 | &rtc_device, | |
896 | #endif | |
897 | ||
898 | #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) | |
899 | &sl811_hcd_device, | |
900 | #endif | |
901 | ||
902 | #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) | |
903 | &isp1362_hcd_device, | |
904 | #endif | |
905 | ||
3f375690 MH |
906 | #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) |
907 | &bfin_isp1760_device, | |
908 | #endif | |
909 | ||
9db144fe MH |
910 | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) |
911 | &musb_device, | |
912 | #endif | |
913 | ||
914 | #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) | |
915 | &smc91x_device, | |
916 | #endif | |
917 | ||
918 | #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) | |
919 | &dm9000_device, | |
920 | #endif | |
921 | ||
922 | #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) | |
923 | &bfin_mac_device, | |
924 | #endif | |
925 | ||
926 | #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) | |
927 | &net2272_bfin_device, | |
928 | #endif | |
929 | ||
930 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | |
931 | &bfin_spi0_device, | |
932 | #endif | |
933 | ||
934 | #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) | |
935 | &bfin_fb_adv7393_device, | |
936 | #endif | |
937 | ||
938 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
939 | &bfin_uart_device, | |
940 | #endif | |
941 | ||
942 | #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) | |
42bd8bcb GY |
943 | #ifdef CONFIG_BFIN_SIR0 |
944 | &bfin_sir0_device, | |
945 | #endif | |
946 | #ifdef CONFIG_BFIN_SIR1 | |
947 | &bfin_sir1_device, | |
948 | #endif | |
9db144fe MH |
949 | #endif |
950 | ||
951 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) | |
952 | &i2c_bfin_twi_device, | |
953 | #endif | |
954 | ||
955 | #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) | |
956 | &bfin_sport0_uart_device, | |
957 | &bfin_sport1_uart_device, | |
958 | #endif | |
959 | ||
9db144fe MH |
960 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) |
961 | &bfin_device_gpiokeys, | |
962 | #endif | |
963 | ||
964 | #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) | |
965 | &ezkit_flash_device, | |
966 | #endif | |
967 | ||
968 | &bfin_gpios_device, | |
969 | }; | |
970 | ||
971 | static int __init stamp_init(void) | |
972 | { | |
973 | printk(KERN_INFO "%s(): registering device resources\n", __func__); | |
974 | ||
975 | #ifdef CONFIG_I2C_BOARDINFO | |
976 | i2c_register_board_info(0, bfin_i2c_board_info, | |
977 | ARRAY_SIZE(bfin_i2c_board_info)); | |
978 | #endif | |
979 | ||
980 | platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); | |
981 | spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); | |
9db144fe MH |
982 | return 0; |
983 | } | |
984 | ||
985 | arch_initcall(stamp_init); | |
986 | ||
987 | void native_machine_restart(char *cmd) | |
988 | { | |
989 | /* workaround reboot hang when booting from SPI */ | |
990 | if ((bfin_read_SYSCR() & 0x7) == 0x3) | |
b52dae31 | 991 | bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS); |
9db144fe MH |
992 | } |
993 | ||
994 | void bfin_get_ether_addr(char *addr) | |
995 | { | |
996 | random_ether_addr(addr); | |
997 | printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); | |
998 | } | |
999 | EXPORT_SYMBOL(bfin_get_ether_addr); |