]>
Commit | Line | Data |
---|---|---|
9db144fe MH |
1 | /* |
2 | * File: arch/blackfin/mach-bf527/boards/cm-bf527.c | |
3 | * Based on: arch/blackfin/mach-bf537/boards/stamp.c | |
4 | * Author: Aidan Williams <aidan@nicta.com.au> | |
5 | * | |
6 | * Created: | |
7 | * Description: | |
8 | * | |
9 | * Modified: | |
10 | * Copyright 2005 National ICT Australia (NICTA) | |
11 | * Copyright 2004-2008 Analog Devices Inc. | |
12 | * | |
13 | * Bugs: Enter bugs at http://blackfin.uclinux.org/ | |
14 | * | |
15 | * This program is free software; you can redistribute it and/or modify | |
16 | * it under the terms of the GNU General Public License as published by | |
17 | * the Free Software Foundation; either version 2 of the License, or | |
18 | * (at your option) any later version. | |
19 | * | |
20 | * This program is distributed in the hope that it will be useful, | |
21 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
22 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
23 | * GNU General Public License for more details. | |
24 | * | |
25 | * You should have received a copy of the GNU General Public License | |
26 | * along with this program; if not, see the file COPYING, or write | |
27 | * to the Free Software Foundation, Inc., | |
28 | * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA | |
29 | */ | |
30 | ||
31 | #include <linux/device.h> | |
32 | #include <linux/platform_device.h> | |
33 | #include <linux/mtd/mtd.h> | |
34 | #include <linux/mtd/partitions.h> | |
35 | #include <linux/mtd/physmap.h> | |
36 | #include <linux/spi/spi.h> | |
37 | #include <linux/spi/flash.h> | |
38 | #include <linux/etherdevice.h> | |
39 | #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) | |
40 | #include <linux/usb/isp1362.h> | |
41 | #endif | |
9db144fe MH |
42 | #include <linux/i2c.h> |
43 | #include <linux/irq.h> | |
44 | #include <linux/interrupt.h> | |
45 | #include <linux/usb/sl811.h> | |
9db144fe | 46 | #include <linux/usb/musb.h> |
9db144fe MH |
47 | #include <asm/cplb.h> |
48 | #include <asm/dma.h> | |
49 | #include <asm/bfin5xx_spi.h> | |
50 | #include <asm/reboot.h> | |
51 | #include <asm/nand.h> | |
52 | #include <asm/portmux.h> | |
53 | #include <asm/dpmc.h> | |
54 | #include <linux/spi/ad7877.h> | |
55 | ||
56 | /* | |
57 | * Name the Board for the /proc/cpuinfo | |
58 | */ | |
59 | const char bfin_board_name[] = "Bluetechnix CM-BF527"; | |
60 | ||
61 | /* | |
62 | * Driver needs to know address, irq and flag pin. | |
63 | */ | |
64 | ||
65 | #define ISP1761_BASE 0x203C0000 | |
66 | #define ISP1761_IRQ IRQ_PF7 | |
67 | ||
68 | #if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) | |
69 | static struct resource bfin_isp1761_resources[] = { | |
70 | [0] = { | |
71 | .name = "isp1761-regs", | |
72 | .start = ISP1761_BASE + 0x00000000, | |
73 | .end = ISP1761_BASE + 0x000fffff, | |
74 | .flags = IORESOURCE_MEM, | |
75 | }, | |
76 | [1] = { | |
77 | .start = ISP1761_IRQ, | |
78 | .end = ISP1761_IRQ, | |
79 | .flags = IORESOURCE_IRQ, | |
80 | }, | |
81 | }; | |
82 | ||
83 | static struct platform_device bfin_isp1761_device = { | |
84 | .name = "isp1761", | |
85 | .id = 0, | |
86 | .num_resources = ARRAY_SIZE(bfin_isp1761_resources), | |
87 | .resource = bfin_isp1761_resources, | |
88 | }; | |
89 | ||
90 | static struct platform_device *bfin_isp1761_devices[] = { | |
91 | &bfin_isp1761_device, | |
92 | }; | |
93 | ||
94 | int __init bfin_isp1761_init(void) | |
95 | { | |
96 | unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); | |
97 | ||
98 | printk(KERN_INFO "%s(): registering device resources\n", __func__); | |
99 | set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); | |
100 | ||
101 | return platform_add_devices(bfin_isp1761_devices, num_devices); | |
102 | } | |
103 | ||
104 | void __exit bfin_isp1761_exit(void) | |
105 | { | |
106 | platform_device_unregister(&bfin_isp1761_device); | |
107 | } | |
108 | ||
109 | arch_initcall(bfin_isp1761_init); | |
110 | #endif | |
111 | ||
112 | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) | |
113 | static struct resource musb_resources[] = { | |
114 | [0] = { | |
115 | .start = 0xffc03800, | |
116 | .end = 0xffc03cff, | |
117 | .flags = IORESOURCE_MEM, | |
118 | }, | |
119 | [1] = { /* general IRQ */ | |
120 | .start = IRQ_USB_INT0, | |
121 | .end = IRQ_USB_INT0, | |
122 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
123 | }, | |
124 | [2] = { /* DMA IRQ */ | |
125 | .start = IRQ_USB_DMA, | |
126 | .end = IRQ_USB_DMA, | |
127 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
128 | }, | |
129 | }; | |
130 | ||
50041acb BW |
131 | static struct musb_hdrc_config musb_config = { |
132 | .multipoint = 0, | |
133 | .dyn_fifo = 0, | |
134 | .soft_con = 1, | |
135 | .dma = 1, | |
136 | .num_eps = 7, | |
137 | .dma_channels = 7, | |
138 | .gpio_vrsel = GPIO_PF11, | |
139 | }; | |
140 | ||
9db144fe MH |
141 | static struct musb_hdrc_platform_data musb_plat = { |
142 | #if defined(CONFIG_USB_MUSB_OTG) | |
143 | .mode = MUSB_OTG, | |
144 | #elif defined(CONFIG_USB_MUSB_HDRC_HCD) | |
145 | .mode = MUSB_HOST, | |
146 | #elif defined(CONFIG_USB_GADGET_MUSB_HDRC) | |
147 | .mode = MUSB_PERIPHERAL, | |
148 | #endif | |
50041acb | 149 | .config = &musb_config, |
9db144fe MH |
150 | }; |
151 | ||
152 | static u64 musb_dmamask = ~(u32)0; | |
153 | ||
154 | static struct platform_device musb_device = { | |
155 | .name = "musb_hdrc", | |
156 | .id = 0, | |
157 | .dev = { | |
158 | .dma_mask = &musb_dmamask, | |
159 | .coherent_dma_mask = 0xffffffff, | |
160 | .platform_data = &musb_plat, | |
161 | }, | |
162 | .num_resources = ARRAY_SIZE(musb_resources), | |
163 | .resource = musb_resources, | |
164 | }; | |
165 | #endif | |
166 | ||
167 | #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) | |
168 | static struct mtd_partition ezkit_partitions[] = { | |
169 | { | |
aa582977 | 170 | .name = "bootloader(nor)", |
9db144fe MH |
171 | .size = 0x40000, |
172 | .offset = 0, | |
173 | }, { | |
aa582977 | 174 | .name = "linux kernel(nor)", |
9db144fe MH |
175 | .size = 0x1C0000, |
176 | .offset = MTDPART_OFS_APPEND, | |
177 | }, { | |
aa582977 | 178 | .name = "file system(nor)", |
9db144fe MH |
179 | .size = MTDPART_SIZ_FULL, |
180 | .offset = MTDPART_OFS_APPEND, | |
181 | } | |
182 | }; | |
183 | ||
184 | static struct physmap_flash_data ezkit_flash_data = { | |
185 | .width = 2, | |
186 | .parts = ezkit_partitions, | |
187 | .nr_parts = ARRAY_SIZE(ezkit_partitions), | |
188 | }; | |
189 | ||
190 | static struct resource ezkit_flash_resource = { | |
191 | .start = 0x20000000, | |
192 | .end = 0x201fffff, | |
193 | .flags = IORESOURCE_MEM, | |
194 | }; | |
195 | ||
196 | static struct platform_device ezkit_flash_device = { | |
197 | .name = "physmap-flash", | |
198 | .id = 0, | |
199 | .dev = { | |
200 | .platform_data = &ezkit_flash_data, | |
201 | }, | |
202 | .num_resources = 1, | |
203 | .resource = &ezkit_flash_resource, | |
204 | }; | |
205 | #endif | |
206 | ||
207 | #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) | |
208 | static struct mtd_partition partition_info[] = { | |
209 | { | |
aa582977 | 210 | .name = "linux kernel(nand)", |
9db144fe MH |
211 | .offset = 0, |
212 | .size = 4 * SIZE_1M, | |
213 | }, | |
214 | { | |
aa582977 | 215 | .name = "file system(nand)", |
9db144fe MH |
216 | .offset = MTDPART_OFS_APPEND, |
217 | .size = MTDPART_SIZ_FULL, | |
218 | }, | |
219 | }; | |
220 | ||
221 | static struct bf5xx_nand_platform bf5xx_nand_platform = { | |
222 | .page_size = NFC_PG_SIZE_256, | |
223 | .data_width = NFC_NWIDTH_8, | |
224 | .partitions = partition_info, | |
225 | .nr_partitions = ARRAY_SIZE(partition_info), | |
226 | .rd_dly = 3, | |
227 | .wr_dly = 3, | |
228 | }; | |
229 | ||
230 | static struct resource bf5xx_nand_resources[] = { | |
231 | { | |
232 | .start = NFC_CTL, | |
233 | .end = NFC_DATA_RD + 2, | |
234 | .flags = IORESOURCE_MEM, | |
235 | }, | |
236 | { | |
237 | .start = CH_NFC, | |
238 | .end = CH_NFC, | |
239 | .flags = IORESOURCE_IRQ, | |
240 | }, | |
241 | }; | |
242 | ||
243 | static struct platform_device bf5xx_nand_device = { | |
244 | .name = "bf5xx-nand", | |
245 | .id = 0, | |
246 | .num_resources = ARRAY_SIZE(bf5xx_nand_resources), | |
247 | .resource = bf5xx_nand_resources, | |
248 | .dev = { | |
249 | .platform_data = &bf5xx_nand_platform, | |
250 | }, | |
251 | }; | |
252 | #endif | |
253 | ||
254 | #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) | |
255 | static struct resource bfin_pcmcia_cf_resources[] = { | |
256 | { | |
257 | .start = 0x20310000, /* IO PORT */ | |
258 | .end = 0x20312000, | |
259 | .flags = IORESOURCE_MEM, | |
260 | }, { | |
261 | .start = 0x20311000, /* Attribute Memory */ | |
262 | .end = 0x20311FFF, | |
263 | .flags = IORESOURCE_MEM, | |
264 | }, { | |
265 | .start = IRQ_PF4, | |
266 | .end = IRQ_PF4, | |
267 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, | |
268 | }, { | |
269 | .start = 6, /* Card Detect PF6 */ | |
270 | .end = 6, | |
271 | .flags = IORESOURCE_IRQ, | |
272 | }, | |
273 | }; | |
274 | ||
275 | static struct platform_device bfin_pcmcia_cf_device = { | |
276 | .name = "bfin_cf_pcmcia", | |
277 | .id = -1, | |
278 | .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), | |
279 | .resource = bfin_pcmcia_cf_resources, | |
280 | }; | |
281 | #endif | |
282 | ||
283 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) | |
284 | static struct platform_device rtc_device = { | |
285 | .name = "rtc-bfin", | |
286 | .id = -1, | |
287 | }; | |
288 | #endif | |
289 | ||
290 | #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) | |
291 | static struct resource smc91x_resources[] = { | |
292 | { | |
293 | .name = "smc91x-regs", | |
294 | .start = 0x20300300, | |
295 | .end = 0x20300300 + 16, | |
296 | .flags = IORESOURCE_MEM, | |
297 | }, { | |
298 | ||
299 | .start = IRQ_PF7, | |
300 | .end = IRQ_PF7, | |
301 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
302 | }, | |
303 | }; | |
304 | static struct platform_device smc91x_device = { | |
305 | .name = "smc91x", | |
306 | .id = 0, | |
307 | .num_resources = ARRAY_SIZE(smc91x_resources), | |
308 | .resource = smc91x_resources, | |
309 | }; | |
310 | #endif | |
311 | ||
312 | #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) | |
313 | static struct resource dm9000_resources[] = { | |
314 | [0] = { | |
315 | .start = 0x203FB800, | |
316 | .end = 0x203FB800 + 8, | |
317 | .flags = IORESOURCE_MEM, | |
318 | }, | |
319 | [1] = { | |
320 | .start = IRQ_PF9, | |
321 | .end = IRQ_PF9, | |
322 | .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE), | |
323 | }, | |
324 | }; | |
325 | ||
326 | static struct platform_device dm9000_device = { | |
327 | .name = "dm9000", | |
328 | .id = -1, | |
329 | .num_resources = ARRAY_SIZE(dm9000_resources), | |
330 | .resource = dm9000_resources, | |
331 | }; | |
332 | #endif | |
333 | ||
334 | #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) | |
335 | static struct resource sl811_hcd_resources[] = { | |
336 | { | |
337 | .start = 0x20340000, | |
338 | .end = 0x20340000, | |
339 | .flags = IORESOURCE_MEM, | |
340 | }, { | |
341 | .start = 0x20340004, | |
342 | .end = 0x20340004, | |
343 | .flags = IORESOURCE_MEM, | |
344 | }, { | |
345 | .start = CONFIG_USB_SL811_BFIN_IRQ, | |
346 | .end = CONFIG_USB_SL811_BFIN_IRQ, | |
347 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
348 | }, | |
349 | }; | |
350 | ||
351 | #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) | |
352 | void sl811_port_power(struct device *dev, int is_on) | |
353 | { | |
354 | gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); | |
355 | gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); | |
356 | } | |
357 | #endif | |
358 | ||
359 | static struct sl811_platform_data sl811_priv = { | |
360 | .potpg = 10, | |
361 | .power = 250, /* == 500mA */ | |
362 | #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) | |
363 | .port_power = &sl811_port_power, | |
364 | #endif | |
365 | }; | |
366 | ||
367 | static struct platform_device sl811_hcd_device = { | |
368 | .name = "sl811-hcd", | |
369 | .id = 0, | |
370 | .dev = { | |
371 | .platform_data = &sl811_priv, | |
372 | }, | |
373 | .num_resources = ARRAY_SIZE(sl811_hcd_resources), | |
374 | .resource = sl811_hcd_resources, | |
375 | }; | |
376 | #endif | |
377 | ||
378 | #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) | |
379 | static struct resource isp1362_hcd_resources[] = { | |
380 | { | |
381 | .start = 0x20360000, | |
382 | .end = 0x20360000, | |
383 | .flags = IORESOURCE_MEM, | |
384 | }, { | |
385 | .start = 0x20360004, | |
386 | .end = 0x20360004, | |
387 | .flags = IORESOURCE_MEM, | |
388 | }, { | |
389 | .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, | |
390 | .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, | |
391 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
392 | }, | |
393 | }; | |
394 | ||
395 | static struct isp1362_platform_data isp1362_priv = { | |
396 | .sel15Kres = 1, | |
397 | .clknotstop = 0, | |
398 | .oc_enable = 0, | |
399 | .int_act_high = 0, | |
400 | .int_edge_triggered = 0, | |
401 | .remote_wakeup_connected = 0, | |
402 | .no_power_switching = 1, | |
403 | .power_switching_mode = 0, | |
404 | }; | |
405 | ||
406 | static struct platform_device isp1362_hcd_device = { | |
407 | .name = "isp1362-hcd", | |
408 | .id = 0, | |
409 | .dev = { | |
410 | .platform_data = &isp1362_priv, | |
411 | }, | |
412 | .num_resources = ARRAY_SIZE(isp1362_hcd_resources), | |
413 | .resource = isp1362_hcd_resources, | |
414 | }; | |
415 | #endif | |
416 | ||
417 | #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) | |
418 | static struct platform_device bfin_mac_device = { | |
419 | .name = "bfin_mac", | |
420 | }; | |
421 | #endif | |
422 | ||
423 | #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) | |
424 | static struct resource net2272_bfin_resources[] = { | |
425 | { | |
426 | .start = 0x20300000, | |
427 | .end = 0x20300000 + 0x100, | |
428 | .flags = IORESOURCE_MEM, | |
429 | }, { | |
430 | .start = IRQ_PF7, | |
431 | .end = IRQ_PF7, | |
432 | .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, | |
433 | }, | |
434 | }; | |
435 | ||
436 | static struct platform_device net2272_bfin_device = { | |
437 | .name = "net2272", | |
438 | .id = -1, | |
439 | .num_resources = ARRAY_SIZE(net2272_bfin_resources), | |
440 | .resource = net2272_bfin_resources, | |
441 | }; | |
442 | #endif | |
443 | ||
444 | #if defined(CONFIG_MTD_M25P80) \ | |
445 | || defined(CONFIG_MTD_M25P80_MODULE) | |
446 | static struct mtd_partition bfin_spi_flash_partitions[] = { | |
447 | { | |
aa582977 | 448 | .name = "bootloader(spi)", |
9db144fe MH |
449 | .size = 0x00040000, |
450 | .offset = 0, | |
451 | .mask_flags = MTD_CAP_ROM | |
452 | }, { | |
aa582977 | 453 | .name = "linux kernel(spi)", |
9db144fe MH |
454 | .size = MTDPART_SIZ_FULL, |
455 | .offset = MTDPART_OFS_APPEND, | |
456 | } | |
457 | }; | |
458 | ||
459 | static struct flash_platform_data bfin_spi_flash_data = { | |
460 | .name = "m25p80", | |
461 | .parts = bfin_spi_flash_partitions, | |
462 | .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), | |
463 | .type = "m25p16", | |
464 | }; | |
465 | ||
466 | /* SPI flash chip (m25p64) */ | |
467 | static struct bfin5xx_spi_chip spi_flash_chip_info = { | |
468 | .enable_dma = 0, /* use dma transfer with this chip*/ | |
469 | .bits_per_word = 8, | |
470 | }; | |
471 | #endif | |
472 | ||
473 | #if defined(CONFIG_SPI_ADC_BF533) \ | |
474 | || defined(CONFIG_SPI_ADC_BF533_MODULE) | |
475 | /* SPI ADC chip */ | |
476 | static struct bfin5xx_spi_chip spi_adc_chip_info = { | |
477 | .enable_dma = 1, /* use dma transfer with this chip*/ | |
478 | .bits_per_word = 16, | |
479 | }; | |
480 | #endif | |
481 | ||
482 | #if defined(CONFIG_SND_BLACKFIN_AD1836) \ | |
483 | || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) | |
484 | static struct bfin5xx_spi_chip ad1836_spi_chip_info = { | |
485 | .enable_dma = 0, | |
486 | .bits_per_word = 16, | |
487 | }; | |
488 | #endif | |
489 | ||
490 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | |
491 | static struct bfin5xx_spi_chip ad9960_spi_chip_info = { | |
492 | .enable_dma = 0, | |
493 | .bits_per_word = 16, | |
494 | }; | |
495 | #endif | |
496 | ||
497 | #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) | |
498 | static struct bfin5xx_spi_chip spi_mmc_chip_info = { | |
499 | .enable_dma = 1, | |
500 | .bits_per_word = 8, | |
501 | }; | |
502 | #endif | |
503 | ||
504 | #if defined(CONFIG_PBX) | |
505 | static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { | |
506 | .ctl_reg = 0x4, /* send zero */ | |
507 | .enable_dma = 0, | |
508 | .bits_per_word = 8, | |
509 | .cs_change_per_word = 1, | |
510 | }; | |
511 | #endif | |
512 | ||
513 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) | |
514 | static struct bfin5xx_spi_chip spi_ad7877_chip_info = { | |
515 | .enable_dma = 0, | |
516 | .bits_per_word = 16, | |
517 | }; | |
518 | ||
519 | static const struct ad7877_platform_data bfin_ad7877_ts_info = { | |
520 | .model = 7877, | |
521 | .vref_delay_usecs = 50, /* internal, no capacitor */ | |
522 | .x_plate_ohms = 419, | |
523 | .y_plate_ohms = 486, | |
524 | .pressure_max = 1000, | |
525 | .pressure_min = 0, | |
526 | .stopacq_polarity = 1, | |
527 | .first_conversion_delay = 3, | |
528 | .acquisition_time = 1, | |
529 | .averaging = 1, | |
530 | .pen_down_acc_interval = 1, | |
531 | }; | |
532 | #endif | |
533 | ||
534 | #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ | |
535 | && defined(CONFIG_SND_SOC_WM8731_SPI) | |
536 | static struct bfin5xx_spi_chip spi_wm8731_chip_info = { | |
537 | .enable_dma = 0, | |
538 | .bits_per_word = 16, | |
539 | }; | |
540 | #endif | |
541 | ||
542 | #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) | |
543 | static struct bfin5xx_spi_chip spidev_chip_info = { | |
544 | .enable_dma = 0, | |
545 | .bits_per_word = 8, | |
546 | }; | |
547 | #endif | |
548 | ||
549 | static struct spi_board_info bfin_spi_board_info[] __initdata = { | |
550 | #if defined(CONFIG_MTD_M25P80) \ | |
551 | || defined(CONFIG_MTD_M25P80_MODULE) | |
552 | { | |
553 | /* the modalias must be the same as spi device driver name */ | |
554 | .modalias = "m25p80", /* Name of spi_driver for this device */ | |
555 | .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ | |
556 | .bus_num = 0, /* Framework bus number */ | |
557 | .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ | |
558 | .platform_data = &bfin_spi_flash_data, | |
559 | .controller_data = &spi_flash_chip_info, | |
560 | .mode = SPI_MODE_3, | |
561 | }, | |
562 | #endif | |
563 | ||
564 | #if defined(CONFIG_SPI_ADC_BF533) \ | |
565 | || defined(CONFIG_SPI_ADC_BF533_MODULE) | |
566 | { | |
567 | .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ | |
568 | .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ | |
569 | .bus_num = 0, /* Framework bus number */ | |
570 | .chip_select = 1, /* Framework chip select. */ | |
571 | .platform_data = NULL, /* No spi_driver specific config */ | |
572 | .controller_data = &spi_adc_chip_info, | |
573 | }, | |
574 | #endif | |
575 | ||
576 | #if defined(CONFIG_SND_BLACKFIN_AD1836) \ | |
577 | || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) | |
578 | { | |
579 | .modalias = "ad1836-spi", | |
580 | .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ | |
581 | .bus_num = 0, | |
582 | .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, | |
583 | .controller_data = &ad1836_spi_chip_info, | |
584 | }, | |
585 | #endif | |
586 | #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) | |
587 | { | |
588 | .modalias = "ad9960-spi", | |
589 | .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ | |
590 | .bus_num = 0, | |
591 | .chip_select = 1, | |
592 | .controller_data = &ad9960_spi_chip_info, | |
593 | }, | |
594 | #endif | |
595 | #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) | |
596 | { | |
597 | .modalias = "spi_mmc_dummy", | |
598 | .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ | |
599 | .bus_num = 0, | |
600 | .chip_select = 0, | |
601 | .platform_data = NULL, | |
602 | .controller_data = &spi_mmc_chip_info, | |
603 | .mode = SPI_MODE_3, | |
604 | }, | |
605 | { | |
606 | .modalias = "spi_mmc", | |
607 | .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ | |
608 | .bus_num = 0, | |
609 | .chip_select = CONFIG_SPI_MMC_CS_CHAN, | |
610 | .platform_data = NULL, | |
611 | .controller_data = &spi_mmc_chip_info, | |
612 | .mode = SPI_MODE_3, | |
613 | }, | |
614 | #endif | |
615 | #if defined(CONFIG_PBX) | |
616 | { | |
617 | .modalias = "fxs-spi", | |
618 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | |
619 | .bus_num = 0, | |
620 | .chip_select = 8 - CONFIG_J11_JUMPER, | |
621 | .controller_data = &spi_si3xxx_chip_info, | |
622 | .mode = SPI_MODE_3, | |
623 | }, | |
624 | { | |
625 | .modalias = "fxo-spi", | |
626 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | |
627 | .bus_num = 0, | |
628 | .chip_select = 8 - CONFIG_J19_JUMPER, | |
629 | .controller_data = &spi_si3xxx_chip_info, | |
630 | .mode = SPI_MODE_3, | |
631 | }, | |
632 | #endif | |
633 | #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) | |
634 | { | |
635 | .modalias = "ad7877", | |
636 | .platform_data = &bfin_ad7877_ts_info, | |
637 | .irq = IRQ_PF8, | |
638 | .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ | |
639 | .bus_num = 0, | |
640 | .chip_select = 2, | |
641 | .controller_data = &spi_ad7877_chip_info, | |
642 | }, | |
643 | #endif | |
644 | #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ | |
645 | && defined(CONFIG_SND_SOC_WM8731_SPI) | |
646 | { | |
647 | .modalias = "wm8731", | |
648 | .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ | |
649 | .bus_num = 0, | |
650 | .chip_select = 5, | |
651 | .controller_data = &spi_wm8731_chip_info, | |
652 | .mode = SPI_MODE_0, | |
653 | }, | |
654 | #endif | |
655 | #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) | |
656 | { | |
657 | .modalias = "spidev", | |
658 | .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ | |
659 | .bus_num = 0, | |
660 | .chip_select = 1, | |
661 | .controller_data = &spidev_chip_info, | |
662 | }, | |
663 | #endif | |
664 | }; | |
665 | ||
666 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | |
667 | /* SPI controller data */ | |
668 | static struct bfin5xx_spi_master bfin_spi0_info = { | |
669 | .num_chipselect = 8, | |
670 | .enable_dma = 1, /* master has the ability to do dma transfer */ | |
671 | .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, | |
672 | }; | |
673 | ||
674 | /* SPI (0) */ | |
675 | static struct resource bfin_spi0_resource[] = { | |
676 | [0] = { | |
677 | .start = SPI0_REGBASE, | |
678 | .end = SPI0_REGBASE + 0xFF, | |
679 | .flags = IORESOURCE_MEM, | |
680 | }, | |
681 | [1] = { | |
682 | .start = CH_SPI, | |
683 | .end = CH_SPI, | |
684 | .flags = IORESOURCE_IRQ, | |
685 | }, | |
686 | }; | |
687 | ||
688 | static struct platform_device bfin_spi0_device = { | |
689 | .name = "bfin-spi", | |
690 | .id = 0, /* Bus number */ | |
691 | .num_resources = ARRAY_SIZE(bfin_spi0_resource), | |
692 | .resource = bfin_spi0_resource, | |
693 | .dev = { | |
694 | .platform_data = &bfin_spi0_info, /* Passed to driver */ | |
695 | }, | |
696 | }; | |
697 | #endif /* spi master and devices */ | |
698 | ||
699 | #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) | |
700 | static struct platform_device bfin_fb_adv7393_device = { | |
701 | .name = "bfin-adv7393", | |
702 | }; | |
703 | #endif | |
704 | ||
705 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
706 | static struct resource bfin_uart_resources[] = { | |
707 | #ifdef CONFIG_SERIAL_BFIN_UART0 | |
708 | { | |
709 | .start = 0xFFC00400, | |
710 | .end = 0xFFC004FF, | |
711 | .flags = IORESOURCE_MEM, | |
712 | }, | |
713 | #endif | |
714 | #ifdef CONFIG_SERIAL_BFIN_UART1 | |
715 | { | |
716 | .start = 0xFFC02000, | |
717 | .end = 0xFFC020FF, | |
718 | .flags = IORESOURCE_MEM, | |
719 | }, | |
720 | #endif | |
721 | }; | |
722 | ||
723 | static struct platform_device bfin_uart_device = { | |
724 | .name = "bfin-uart", | |
725 | .id = 1, | |
726 | .num_resources = ARRAY_SIZE(bfin_uart_resources), | |
727 | .resource = bfin_uart_resources, | |
728 | }; | |
729 | #endif | |
730 | ||
731 | #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) | |
732 | static struct resource bfin_sir_resources[] = { | |
733 | #ifdef CONFIG_BFIN_SIR0 | |
734 | { | |
735 | .start = 0xFFC00400, | |
736 | .end = 0xFFC004FF, | |
737 | .flags = IORESOURCE_MEM, | |
738 | }, | |
739 | #endif | |
740 | #ifdef CONFIG_BFIN_SIR1 | |
741 | { | |
742 | .start = 0xFFC02000, | |
743 | .end = 0xFFC020FF, | |
744 | .flags = IORESOURCE_MEM, | |
745 | }, | |
746 | #endif | |
747 | }; | |
748 | ||
749 | static struct platform_device bfin_sir_device = { | |
750 | .name = "bfin_sir", | |
751 | .id = 0, | |
752 | .num_resources = ARRAY_SIZE(bfin_sir_resources), | |
753 | .resource = bfin_sir_resources, | |
754 | }; | |
755 | #endif | |
756 | ||
757 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) | |
758 | static struct resource bfin_twi0_resource[] = { | |
759 | [0] = { | |
760 | .start = TWI0_REGBASE, | |
761 | .end = TWI0_REGBASE, | |
762 | .flags = IORESOURCE_MEM, | |
763 | }, | |
764 | [1] = { | |
765 | .start = IRQ_TWI, | |
766 | .end = IRQ_TWI, | |
767 | .flags = IORESOURCE_IRQ, | |
768 | }, | |
769 | }; | |
770 | ||
771 | static struct platform_device i2c_bfin_twi_device = { | |
772 | .name = "i2c-bfin-twi", | |
773 | .id = 0, | |
774 | .num_resources = ARRAY_SIZE(bfin_twi0_resource), | |
775 | .resource = bfin_twi0_resource, | |
776 | }; | |
777 | #endif | |
778 | ||
779 | #ifdef CONFIG_I2C_BOARDINFO | |
780 | static struct i2c_board_info __initdata bfin_i2c_board_info[] = { | |
781 | #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) | |
782 | { | |
783 | I2C_BOARD_INFO("pcf8574_lcd", 0x22), | |
784 | .type = "pcf8574_lcd", | |
785 | }, | |
786 | #endif | |
787 | #if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE) | |
788 | { | |
789 | I2C_BOARD_INFO("pcf8574_keypad", 0x27), | |
790 | .type = "pcf8574_keypad", | |
791 | .irq = IRQ_PF8, | |
792 | }, | |
793 | #endif | |
794 | }; | |
795 | #endif | |
796 | ||
797 | #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) | |
798 | static struct platform_device bfin_sport0_uart_device = { | |
799 | .name = "bfin-sport-uart", | |
800 | .id = 0, | |
801 | }; | |
802 | ||
803 | static struct platform_device bfin_sport1_uart_device = { | |
804 | .name = "bfin-sport-uart", | |
805 | .id = 1, | |
806 | }; | |
807 | #endif | |
808 | ||
9db144fe MH |
809 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) |
810 | #include <linux/input.h> | |
811 | #include <linux/gpio_keys.h> | |
812 | ||
813 | static struct gpio_keys_button bfin_gpio_keys_table[] = { | |
814 | {BTN_0, GPIO_PF14, 1, "gpio-keys: BTN0"}, | |
815 | }; | |
816 | ||
817 | static struct gpio_keys_platform_data bfin_gpio_keys_data = { | |
818 | .buttons = bfin_gpio_keys_table, | |
819 | .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), | |
820 | }; | |
821 | ||
822 | static struct platform_device bfin_device_gpiokeys = { | |
823 | .name = "gpio-keys", | |
824 | .dev = { | |
825 | .platform_data = &bfin_gpio_keys_data, | |
826 | }, | |
827 | }; | |
828 | #endif | |
829 | ||
830 | static struct resource bfin_gpios_resources = { | |
831 | .start = 0, | |
832 | .end = MAX_BLACKFIN_GPIOS - 1, | |
833 | .flags = IORESOURCE_IRQ, | |
834 | }; | |
835 | ||
836 | static struct platform_device bfin_gpios_device = { | |
837 | .name = "simple-gpio", | |
838 | .id = -1, | |
839 | .num_resources = 1, | |
840 | .resource = &bfin_gpios_resources, | |
841 | }; | |
842 | ||
843 | static const unsigned int cclk_vlev_datasheet[] = | |
844 | { | |
845 | VRPAIR(VLEV_100, 400000000), | |
846 | VRPAIR(VLEV_105, 426000000), | |
847 | VRPAIR(VLEV_110, 500000000), | |
848 | VRPAIR(VLEV_115, 533000000), | |
849 | VRPAIR(VLEV_120, 600000000), | |
850 | }; | |
851 | ||
852 | static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { | |
853 | .tuple_tab = cclk_vlev_datasheet, | |
854 | .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), | |
855 | .vr_settling_time = 25 /* us */, | |
856 | }; | |
857 | ||
858 | static struct platform_device bfin_dpmc = { | |
859 | .name = "bfin dpmc", | |
860 | .dev = { | |
861 | .platform_data = &bfin_dmpc_vreg_data, | |
862 | }, | |
863 | }; | |
864 | ||
865 | static struct platform_device *stamp_devices[] __initdata = { | |
866 | ||
867 | &bfin_dpmc, | |
868 | ||
869 | #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) | |
870 | &bf5xx_nand_device, | |
871 | #endif | |
872 | ||
873 | #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) | |
874 | &bfin_pcmcia_cf_device, | |
875 | #endif | |
876 | ||
877 | #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) | |
878 | &rtc_device, | |
879 | #endif | |
880 | ||
881 | #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) | |
882 | &sl811_hcd_device, | |
883 | #endif | |
884 | ||
885 | #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) | |
886 | &isp1362_hcd_device, | |
887 | #endif | |
888 | ||
889 | #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) | |
890 | &musb_device, | |
891 | #endif | |
892 | ||
893 | #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) | |
894 | &smc91x_device, | |
895 | #endif | |
896 | ||
897 | #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) | |
898 | &dm9000_device, | |
899 | #endif | |
900 | ||
901 | #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) | |
902 | &bfin_mac_device, | |
903 | #endif | |
904 | ||
905 | #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) | |
906 | &net2272_bfin_device, | |
907 | #endif | |
908 | ||
909 | #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) | |
910 | &bfin_spi0_device, | |
911 | #endif | |
912 | ||
913 | #if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) | |
914 | &bfin_fb_adv7393_device, | |
915 | #endif | |
916 | ||
917 | #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) | |
918 | &bfin_uart_device, | |
919 | #endif | |
920 | ||
921 | #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) | |
922 | &bfin_sir_device, | |
923 | #endif | |
924 | ||
925 | #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) | |
926 | &i2c_bfin_twi_device, | |
927 | #endif | |
928 | ||
929 | #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) | |
930 | &bfin_sport0_uart_device, | |
931 | &bfin_sport1_uart_device, | |
932 | #endif | |
933 | ||
9db144fe MH |
934 | #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) |
935 | &bfin_device_gpiokeys, | |
936 | #endif | |
937 | ||
938 | #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) | |
939 | &ezkit_flash_device, | |
940 | #endif | |
941 | ||
942 | &bfin_gpios_device, | |
943 | }; | |
944 | ||
945 | static int __init stamp_init(void) | |
946 | { | |
947 | printk(KERN_INFO "%s(): registering device resources\n", __func__); | |
948 | ||
949 | #ifdef CONFIG_I2C_BOARDINFO | |
950 | i2c_register_board_info(0, bfin_i2c_board_info, | |
951 | ARRAY_SIZE(bfin_i2c_board_info)); | |
952 | #endif | |
953 | ||
954 | platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); | |
955 | spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); | |
9db144fe MH |
956 | return 0; |
957 | } | |
958 | ||
959 | arch_initcall(stamp_init); | |
960 | ||
961 | void native_machine_restart(char *cmd) | |
962 | { | |
963 | /* workaround reboot hang when booting from SPI */ | |
964 | if ((bfin_read_SYSCR() & 0x7) == 0x3) | |
965 | bfin_gpio_reset_spi0_ssel1(); | |
966 | } | |
967 | ||
968 | void bfin_get_ether_addr(char *addr) | |
969 | { | |
970 | random_ether_addr(addr); | |
971 | printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); | |
972 | } | |
973 | EXPORT_SYMBOL(bfin_get_ether_addr); |