]>
Commit | Line | Data |
---|---|---|
577145f4 VP |
1 | /* |
2 | * Copyright (C) 2009 Texas Instruments Inc. | |
3 | * Mikkel Christensen <mlc@ti.com> | |
4 | * | |
5 | * Modified from mach-omap2/board-ldp.c | |
6 | * | |
7 | * This program is free software; you can redistribute it and/or modify | |
8 | * it under the terms of the GNU General Public License version 2 as | |
9 | * published by the Free Software Foundation. | |
10 | */ | |
11 | ||
12 | #include <linux/kernel.h> | |
13 | #include <linux/init.h> | |
14 | #include <linux/platform_device.h> | |
70ac51ab | 15 | #include <linux/input.h> |
577145f4 VP |
16 | #include <linux/gpio.h> |
17 | #include <linux/i2c/twl4030.h> | |
70ac51ab | 18 | #include <linux/regulator/machine.h> |
577145f4 VP |
19 | |
20 | #include <asm/mach-types.h> | |
21 | #include <asm/mach/arch.h> | |
22 | ||
23 | #include <mach/common.h> | |
24 | #include <mach/usb.h> | |
70ac51ab | 25 | #include <mach/keypad.h> |
577145f4 VP |
26 | |
27 | #include "mmc-twl4030.h" | |
02563a5d | 28 | #include "sdram-micron-mt46h32m32lf-6.h" |
577145f4 | 29 | |
70ac51ab | 30 | /* Zoom2 has Qwerty keyboard*/ |
4f543332 | 31 | static int board_keymap[] = { |
70ac51ab VP |
32 | KEY(0, 0, KEY_E), |
33 | KEY(1, 0, KEY_R), | |
34 | KEY(2, 0, KEY_T), | |
35 | KEY(3, 0, KEY_HOME), | |
36 | KEY(6, 0, KEY_I), | |
37 | KEY(7, 0, KEY_LEFTSHIFT), | |
38 | KEY(0, 1, KEY_D), | |
39 | KEY(1, 1, KEY_F), | |
40 | KEY(2, 1, KEY_G), | |
41 | KEY(3, 1, KEY_SEND), | |
42 | KEY(6, 1, KEY_K), | |
43 | KEY(7, 1, KEY_ENTER), | |
44 | KEY(0, 2, KEY_X), | |
45 | KEY(1, 2, KEY_C), | |
46 | KEY(2, 2, KEY_V), | |
47 | KEY(3, 2, KEY_END), | |
48 | KEY(6, 2, KEY_DOT), | |
49 | KEY(7, 2, KEY_CAPSLOCK), | |
50 | KEY(0, 3, KEY_Z), | |
51 | KEY(1, 3, KEY_KPPLUS), | |
52 | KEY(2, 3, KEY_B), | |
53 | KEY(3, 3, KEY_F1), | |
54 | KEY(6, 3, KEY_O), | |
55 | KEY(7, 3, KEY_SPACE), | |
56 | KEY(0, 4, KEY_W), | |
57 | KEY(1, 4, KEY_Y), | |
58 | KEY(2, 4, KEY_U), | |
59 | KEY(3, 4, KEY_F2), | |
60 | KEY(4, 4, KEY_VOLUMEUP), | |
61 | KEY(6, 4, KEY_L), | |
62 | KEY(7, 4, KEY_LEFT), | |
63 | KEY(0, 5, KEY_S), | |
64 | KEY(1, 5, KEY_H), | |
65 | KEY(2, 5, KEY_J), | |
66 | KEY(3, 5, KEY_F3), | |
67 | KEY(5, 5, KEY_VOLUMEDOWN), | |
68 | KEY(6, 5, KEY_M), | |
69 | KEY(4, 5, KEY_ENTER), | |
70 | KEY(7, 5, KEY_RIGHT), | |
71 | KEY(0, 6, KEY_Q), | |
72 | KEY(1, 6, KEY_A), | |
73 | KEY(2, 6, KEY_N), | |
74 | KEY(3, 6, KEY_BACKSPACE), | |
75 | KEY(6, 6, KEY_P), | |
76 | KEY(7, 6, KEY_UP), | |
77 | KEY(6, 7, KEY_SELECT), | |
78 | KEY(7, 7, KEY_DOWN), | |
79 | KEY(0, 7, KEY_PROG1), /*MACRO 1 <User defined> */ | |
80 | KEY(1, 7, KEY_PROG2), /*MACRO 2 <User defined> */ | |
81 | KEY(2, 7, KEY_PROG3), /*MACRO 3 <User defined> */ | |
82 | KEY(3, 7, KEY_PROG4), /*MACRO 4 <User defined> */ | |
83 | 0 | |
84 | }; | |
85 | ||
4f543332 TL |
86 | static struct matrix_keymap_data board_map_data = { |
87 | .keymap = board_keymap, | |
88 | .keymap_size = ARRAY_SIZE(board_keymap), | |
89 | }; | |
90 | ||
70ac51ab | 91 | static struct twl4030_keypad_data zoom2_kp_twl4030_data = { |
4f543332 | 92 | .keymap_data = &board_map_data, |
70ac51ab VP |
93 | .rows = 8, |
94 | .cols = 8, | |
70ac51ab VP |
95 | .rep = 1, |
96 | }; | |
97 | ||
577145f4 | 98 | static struct omap_board_config_kernel zoom2_config[] __initdata = { |
577145f4 VP |
99 | }; |
100 | ||
70ac51ab VP |
101 | static struct regulator_consumer_supply zoom2_vmmc1_supply = { |
102 | .supply = "vmmc", | |
103 | }; | |
104 | ||
105 | static struct regulator_consumer_supply zoom2_vsim_supply = { | |
106 | .supply = "vmmc_aux", | |
107 | }; | |
108 | ||
109 | static struct regulator_consumer_supply zoom2_vmmc2_supply = { | |
110 | .supply = "vmmc", | |
111 | }; | |
112 | ||
113 | /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ | |
114 | static struct regulator_init_data zoom2_vmmc1 = { | |
115 | .constraints = { | |
116 | .min_uV = 1850000, | |
117 | .max_uV = 3150000, | |
118 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
119 | | REGULATOR_MODE_STANDBY, | |
120 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
121 | | REGULATOR_CHANGE_MODE | |
122 | | REGULATOR_CHANGE_STATUS, | |
123 | }, | |
124 | .num_consumer_supplies = 1, | |
125 | .consumer_supplies = &zoom2_vmmc1_supply, | |
126 | }; | |
127 | ||
128 | /* VMMC2 for MMC2 card */ | |
129 | static struct regulator_init_data zoom2_vmmc2 = { | |
130 | .constraints = { | |
131 | .min_uV = 1850000, | |
132 | .max_uV = 1850000, | |
133 | .apply_uV = true, | |
134 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
135 | | REGULATOR_MODE_STANDBY, | |
136 | .valid_ops_mask = REGULATOR_CHANGE_MODE | |
137 | | REGULATOR_CHANGE_STATUS, | |
138 | }, | |
139 | .num_consumer_supplies = 1, | |
140 | .consumer_supplies = &zoom2_vmmc2_supply, | |
141 | }; | |
142 | ||
143 | /* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */ | |
144 | static struct regulator_init_data zoom2_vsim = { | |
145 | .constraints = { | |
146 | .min_uV = 1800000, | |
147 | .max_uV = 3000000, | |
148 | .valid_modes_mask = REGULATOR_MODE_NORMAL | |
149 | | REGULATOR_MODE_STANDBY, | |
150 | .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | |
151 | | REGULATOR_CHANGE_MODE | |
152 | | REGULATOR_CHANGE_STATUS, | |
153 | }, | |
154 | .num_consumer_supplies = 1, | |
155 | .consumer_supplies = &zoom2_vsim_supply, | |
156 | }; | |
157 | ||
158 | static struct twl4030_hsmmc_info mmc[] __initdata = { | |
159 | { | |
160 | .mmc = 1, | |
161 | .wires = 4, | |
162 | .gpio_wp = -EINVAL, | |
163 | }, | |
164 | { | |
165 | .mmc = 2, | |
166 | .wires = 4, | |
167 | .gpio_wp = -EINVAL, | |
168 | }, | |
169 | {} /* Terminator */ | |
170 | }; | |
171 | ||
172 | static int zoom2_twl_gpio_setup(struct device *dev, | |
173 | unsigned gpio, unsigned ngpio) | |
174 | { | |
175 | /* gpio + 0 is "mmc0_cd" (input/IRQ), | |
176 | * gpio + 1 is "mmc1_cd" (input/IRQ) | |
177 | */ | |
178 | mmc[0].gpio_cd = gpio + 0; | |
179 | mmc[1].gpio_cd = gpio + 1; | |
180 | twl4030_mmc_init(mmc); | |
181 | ||
182 | /* link regulators to MMC adapters ... we "know" the | |
183 | * regulators will be set up only *after* we return. | |
184 | */ | |
185 | zoom2_vmmc1_supply.dev = mmc[0].dev; | |
186 | zoom2_vsim_supply.dev = mmc[0].dev; | |
187 | zoom2_vmmc2_supply.dev = mmc[1].dev; | |
188 | ||
189 | return 0; | |
190 | } | |
191 | ||
192 | ||
193 | static int zoom2_batt_table[] = { | |
194 | /* 0 C*/ | |
195 | 30800, 29500, 28300, 27100, | |
196 | 26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900, | |
197 | 17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100, | |
198 | 11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310, | |
199 | 8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830, | |
200 | 5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170, | |
201 | 4040, 3910, 3790, 3670, 3550 | |
202 | }; | |
203 | ||
204 | static struct twl4030_bci_platform_data zoom2_bci_data = { | |
205 | .battery_tmp_tbl = zoom2_batt_table, | |
206 | .tblsize = ARRAY_SIZE(zoom2_batt_table), | |
207 | }; | |
208 | ||
209 | static struct twl4030_usb_data zoom2_usb_data = { | |
210 | .usb_mode = T2_USB_MODE_ULPI, | |
211 | }; | |
212 | ||
b3c6df3a PW |
213 | static void __init omap_zoom2_init_irq(void) |
214 | { | |
215 | omap_board_config = zoom2_config; | |
216 | omap_board_config_size = ARRAY_SIZE(zoom2_config); | |
02563a5d TR |
217 | omap2_init_common_hw(mt46h32m32lf6_sdrc_params, |
218 | mt46h32m32lf6_sdrc_params); | |
b3c6df3a PW |
219 | omap_init_irq(); |
220 | omap_gpio_init(); | |
221 | } | |
222 | ||
577145f4 VP |
223 | static struct twl4030_gpio_platform_data zoom2_gpio_data = { |
224 | .gpio_base = OMAP_MAX_GPIO_LINES, | |
225 | .irq_base = TWL4030_GPIO_IRQ_BASE, | |
226 | .irq_end = TWL4030_GPIO_IRQ_END, | |
70ac51ab VP |
227 | .setup = zoom2_twl_gpio_setup, |
228 | }; | |
229 | ||
230 | static struct twl4030_madc_platform_data zoom2_madc_data = { | |
231 | .irq_line = 1, | |
577145f4 VP |
232 | }; |
233 | ||
234 | static struct twl4030_platform_data zoom2_twldata = { | |
235 | .irq_base = TWL4030_IRQ_BASE, | |
236 | .irq_end = TWL4030_IRQ_END, | |
237 | ||
238 | /* platform_data for children goes here */ | |
70ac51ab VP |
239 | .bci = &zoom2_bci_data, |
240 | .madc = &zoom2_madc_data, | |
241 | .usb = &zoom2_usb_data, | |
577145f4 | 242 | .gpio = &zoom2_gpio_data, |
70ac51ab VP |
243 | .keypad = &zoom2_kp_twl4030_data, |
244 | .vmmc1 = &zoom2_vmmc1, | |
245 | .vmmc2 = &zoom2_vmmc2, | |
246 | .vsim = &zoom2_vsim, | |
247 | ||
577145f4 VP |
248 | }; |
249 | ||
250 | static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = { | |
251 | { | |
252 | I2C_BOARD_INFO("twl4030", 0x48), | |
253 | .flags = I2C_CLIENT_WAKE, | |
254 | .irq = INT_34XX_SYS_NIRQ, | |
255 | .platform_data = &zoom2_twldata, | |
256 | }, | |
257 | }; | |
258 | ||
259 | static int __init omap_i2c_init(void) | |
260 | { | |
261 | omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo, | |
262 | ARRAY_SIZE(zoom2_i2c_boardinfo)); | |
263 | omap_register_i2c_bus(2, 400, NULL, 0); | |
264 | omap_register_i2c_bus(3, 400, NULL, 0); | |
265 | return 0; | |
266 | } | |
267 | ||
577145f4 VP |
268 | extern int __init omap_zoom2_debugboard_init(void); |
269 | ||
270 | static void __init omap_zoom2_init(void) | |
271 | { | |
272 | omap_i2c_init(); | |
577145f4 VP |
273 | omap_serial_init(); |
274 | omap_zoom2_debugboard_init(); | |
577145f4 VP |
275 | usb_musb_init(); |
276 | } | |
277 | ||
278 | static void __init omap_zoom2_map_io(void) | |
279 | { | |
280 | omap2_set_globals_343x(); | |
281 | omap2_map_common_io(); | |
282 | } | |
283 | ||
284 | MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") | |
285 | .phys_io = 0x48000000, | |
b4224b23 | 286 | .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, |
577145f4 VP |
287 | .boot_params = 0x80000100, |
288 | .map_io = omap_zoom2_map_io, | |
289 | .init_irq = omap_zoom2_init_irq, | |
290 | .init_machine = omap_zoom2_init, | |
291 | .timer = &omap_timer, | |
292 | MACHINE_END |