[net-next-2.6.git] / arch / arm / mach-omap1 / board-h2.c

/*
 * linux/arch/arm/mach-omap1/board-h2.c
 *
 * Board specific inits for OMAP-1610 H2
 *
 * Copyright (C) 2001 RidgeRun, Inc.
 * Author: Greg Lonnon <glonnon@ridgerun.com>
 *
 * Copyright (C) 2002 MontaVista Software, Inc.
 *
 * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
 * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
 *
 * H2 specific changes and cleanup
 * Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <linux/workqueue.h>

#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>

#include <asm/arch/gpio.h>
#include <asm/arch/mux.h>
#include <asm/arch/tc.h>
#include <asm/arch/irda.h>
#include <asm/arch/usb.h>
#include <asm/arch/keypad.h>
#include <asm/arch/common.h>
#include <asm/arch/mcbsp.h>
#include <asm/arch/omap-alsa.h>

extern int omap_gpio_init(void);

static int h2_keymap[] = {
	KEY(0, 0, KEY_LEFT),
	KEY(0, 1, KEY_RIGHT),
	KEY(0, 2, KEY_3),
	KEY(0, 3, KEY_F10),
	KEY(0, 4, KEY_F5),
	KEY(0, 5, KEY_9),
	KEY(1, 0, KEY_DOWN),
	KEY(1, 1, KEY_UP),
	KEY(1, 2, KEY_2),
	KEY(1, 3, KEY_F9),
	KEY(1, 4, KEY_F7),
	KEY(1, 5, KEY_0),
	KEY(2, 0, KEY_ENTER),
	KEY(2, 1, KEY_6),
	KEY(2, 2, KEY_1),
	KEY(2, 3, KEY_F2),
	KEY(2, 4, KEY_F6),
	KEY(2, 5, KEY_HOME),
	KEY(3, 0, KEY_8),
	KEY(3, 1, KEY_5),
	KEY(3, 2, KEY_F12),
	KEY(3, 3, KEY_F3),
	KEY(3, 4, KEY_F8),
	KEY(3, 5, KEY_END),
	KEY(4, 0, KEY_7),
	KEY(4, 1, KEY_4),
	KEY(4, 2, KEY_F11),
	KEY(4, 3, KEY_F1),
	KEY(4, 4, KEY_F4),
	KEY(4, 5, KEY_ESC),
	KEY(5, 0, KEY_F13),
	KEY(5, 1, KEY_F14),
	KEY(5, 2, KEY_F15),
	KEY(5, 3, KEY_F16),
	KEY(5, 4, KEY_SLEEP),
	0
};

static struct mtd_partition h2_nor_partitions[] = {
	/* bootloader (U-Boot, etc) in first sector */
	{
	      .name		= "bootloader",
	      .offset		= 0,
	      .size		= SZ_128K,
	      .mask_flags	= MTD_WRITEABLE, /* force read-only */
	},
	/* bootloader params in the next sector */
	{
	      .name		= "params",
	      .offset		= MTDPART_OFS_APPEND,
	      .size		= SZ_128K,
	      .mask_flags	= 0,
	},
	/* kernel */
	{
	      .name		= "kernel",
	      .offset		= MTDPART_OFS_APPEND,
	      .size		= SZ_2M,
	      .mask_flags	= 0
	},
	/* file system */
	{
	      .name		= "filesystem",
	      .offset		= MTDPART_OFS_APPEND,
	      .size		= MTDPART_SIZ_FULL,
	      .mask_flags	= 0
	}
};

static struct flash_platform_data h2_nor_data = {
	.map_name	= "cfi_probe",
	.width		= 2,
	.parts		= h2_nor_partitions,
	.nr_parts	= ARRAY_SIZE(h2_nor_partitions),
};

static struct resource h2_nor_resource = {
	/* This is on CS3, wherever it's mapped */
	.flags		= IORESOURCE_MEM,
};

static struct platform_device h2_nor_device = {
	.name		= "omapflash",
	.id		= 0,
	.dev		= {
		.platform_data	= &h2_nor_data,
	},
	.num_resources	= 1,
	.resource	= &h2_nor_resource,
};

static struct resource h2_smc91x_resources[] = {
	[0] = {
		.start	= OMAP1610_ETHR_START,		/* Physical */
		.end	= OMAP1610_ETHR_START + 0xf,
		.flags	= IORESOURCE_MEM,
	},
	[1] = {
		.start	= OMAP_GPIO_IRQ(0),
		.end	= OMAP_GPIO_IRQ(0),
		.flags	= IORESOURCE_IRQ,
	},
};

static struct platform_device h2_smc91x_device = {
	.name		= "smc91x",
	.id		= 0,
	.num_resources	= ARRAY_SIZE(h2_smc91x_resources),
	.resource	= h2_smc91x_resources,
};

static struct resource h2_kp_resources[] = {
	[0] = {
		.start	= INT_KEYBOARD,
		.end	= INT_KEYBOARD,
		.flags	= IORESOURCE_IRQ,
	},
};

static struct omap_kp_platform_data h2_kp_data = {
	.rows		= 8,
	.cols		= 8,
	.keymap		= h2_keymap,
	.keymapsize	= ARRAY_SIZE(h2_keymap),
	.rep		= 1,
	.delay		= 9,
	.dbounce	= 1,
};

static struct platform_device h2_kp_device = {
	.name		= "omap-keypad",
	.id		= -1,
	.dev		= {
		.platform_data = &h2_kp_data,
	},
	.num_resources	= ARRAY_SIZE(h2_kp_resources),
	.resource	= h2_kp_resources,
};

#define H2_IRDA_FIRSEL_GPIO_PIN	17

#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
static int h2_transceiver_mode(struct device *dev, int state)
{
	if (state & IR_SIRMODE)
		omap_set_gpio_dataout(H2_IRDA_FIRSEL_GPIO_PIN, 0);
	else    /* MIR/FIR */
		omap_set_gpio_dataout(H2_IRDA_FIRSEL_GPIO_PIN, 1);

	return 0;
}
#endif

static struct omap_irda_config h2_irda_data = {
	.transceiver_cap	= IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
	.rx_channel		= OMAP_DMA_UART3_RX,
	.tx_channel		= OMAP_DMA_UART3_TX,
	.dest_start		= UART3_THR,
	.src_start		= UART3_RHR,
	.tx_trigger		= 0,
	.rx_trigger		= 0,
};

static struct resource h2_irda_resources[] = {
	[0] = {
		.start	= INT_UART3,
		.end	= INT_UART3,
		.flags	= IORESOURCE_IRQ,
	},
};
static struct platform_device h2_irda_device = {
	.name		= "omapirda",
	.id		= 0,
	.dev		= {
		.platform_data	= &h2_irda_data,
	},
	.num_resources	= ARRAY_SIZE(h2_irda_resources),
	.resource	= h2_irda_resources,
};

static struct platform_device h2_lcd_device = {
	.name		= "lcd_h2",
	.id		= -1,
};

static struct omap_mcbsp_reg_cfg mcbsp_regs = {
	.spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
	.spcr1 = RINTM(3) | RRST,
	.rcr2  = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
                RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
	.rcr1  = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
	.xcr2  = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
                XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
	.xcr1  = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
	.srgr1 = FWID(15),
	.srgr2 = GSYNC | CLKSP | FSGM | FPER(31),

	.pcr0  = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
	//.pcr0 = CLKXP | CLKRP,        /* mcbsp: slave */
};

static struct omap_alsa_codec_config alsa_config = {
	.name                   = "H2 TSC2101",
	.mcbsp_regs_alsa        = &mcbsp_regs,
	.codec_configure_dev    = NULL, // tsc2101_configure,
	.codec_set_samplerate   = NULL, // tsc2101_set_samplerate,
	.codec_clock_setup      = NULL, // tsc2101_clock_setup,
	.codec_clock_on         = NULL, // tsc2101_clock_on,
	.codec_clock_off        = NULL, // tsc2101_clock_off,
	.get_default_samplerate = NULL, // tsc2101_get_default_samplerate,
};

static struct platform_device h2_mcbsp1_device = {
	.name	= "omap_alsa_mcbsp",
	.id	= 1,
	.dev = {
		.platform_data	= &alsa_config,
	},
};

static struct platform_device *h2_devices[] __initdata = {
	&h2_nor_device,
	&h2_smc91x_device,
	&h2_irda_device,
	&h2_kp_device,
	&h2_lcd_device,
	&h2_mcbsp1_device,
};

static void __init h2_init_smc91x(void)
{
	if ((omap_request_gpio(0)) < 0) {
		printk("Error requesting gpio 0 for smc91x irq\n");
		return;
	}
}

static void __init h2_init_irq(void)
{
	omap1_init_common_hw();
	omap_init_irq();
	omap_gpio_init();
	h2_init_smc91x();
}

static struct omap_usb_config h2_usb_config __initdata = {
	/* usb1 has a Mini-AB port and external isp1301 transceiver */
	.otg		= 2,

#ifdef	CONFIG_USB_GADGET_OMAP
	.hmc_mode	= 19,	// 0:host(off) 1:dev|otg 2:disabled
	// .hmc_mode	= 21,	// 0:host(off) 1:dev(loopback) 2:host(loopback)
#elif	defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
	/* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
	.hmc_mode	= 20,	// 1:dev|otg(off) 1:host 2:disabled
#endif

	.pins[1]	= 3,
};

static struct omap_mmc_config h2_mmc_config __initdata = {
	.mmc [0] = {
		.enabled 	= 1,
		.wire4		= 1,
		.wp_pin		= OMAP_MPUIO(3),
		.power_pin	= -1,	/* tps65010 gpio3 */
		.switch_pin	= OMAP_MPUIO(1),
	},
};

static struct omap_uart_config h2_uart_config __initdata = {
	.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};

static struct omap_lcd_config h2_lcd_config __initdata = {
	.ctrl_name	= "internal",
};

static struct omap_board_config_kernel h2_config[] __initdata = {
	{ OMAP_TAG_USB,           &h2_usb_config },
	{ OMAP_TAG_MMC,           &h2_mmc_config },
	{ OMAP_TAG_UART,	&h2_uart_config },
	{ OMAP_TAG_LCD,		&h2_lcd_config },
};

static void __init h2_init(void)
{
	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
	 * to address 0 by a dip switch), NAND on CS2B.  The NAND driver will
	 * notice whether a NAND chip is enabled at probe time.
	 *
	 * FIXME revC boards (and H3) support NAND-boot, with a dip switch to
	 * put NOR on CS2B and NAND (which on H2 may be 16bit) on CS3.  Try
	 * detecting that in code here, to avoid probing every possible flash
	 * configuration...
	 */
	h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys();
	h2_nor_resource.end += SZ_32M - 1;

	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);

	/* MMC:  card detect and WP */
	// omap_cfg_reg(U19_ARMIO1);		/* CD */
	omap_cfg_reg(BALLOUT_V8_ARMIO3);	/* WP */

	/* Irda */
#if defined(CONFIG_OMAP_IR) || defined(CONFIG_OMAP_IR_MODULE)
	omap_writel(omap_readl(FUNC_MUX_CTRL_A) | 7, FUNC_MUX_CTRL_A);
	if (!(omap_request_gpio(H2_IRDA_FIRSEL_GPIO_PIN))) {
		omap_set_gpio_direction(H2_IRDA_FIRSEL_GPIO_PIN, 0);
		h2_irda_data.transceiver_mode = h2_transceiver_mode;
	}
#endif

	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
	omap_board_config = h2_config;
	omap_board_config_size = ARRAY_SIZE(h2_config);
	omap_serial_init();
}

static void __init h2_map_io(void)
{
	omap1_map_common_io();
}

MACHINE_START(OMAP_H2, "TI-H2")
	/* Maintainer: Imre Deak <imre.deak@nokia.com> */
	.phys_io	= 0xfff00000,
	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
	.boot_params	= 0x10000100,
	.map_io		= h2_map_io,
	.init_irq	= h2_init_irq,
	.init_machine	= h2_init,
	.timer		= &omap_timer,
MACHINE_END
Commit	Line	Data
1da177e4	1	/*
dbdf9ced	2	* linux/arch/arm/mach-omap1/board-h2.c
1da177e4 LT	3	*
	4	* Board specific inits for OMAP-1610 H2
	5	*
	6	* Copyright (C) 2001 RidgeRun, Inc.
	7	* Author: Greg Lonnon <glonnon@ridgerun.com>
	8	*
	9	* Copyright (C) 2002 MontaVista Software, Inc.
	10	*
	11	* Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
	12	* Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
	13	*
	14	* H2 specific changes and cleanup
	15	* Copyright (C) 2004 Nokia Corporation by Imre Deak <imre.deak@nokia.com>
	16	*
	17	* This program is free software; you can redistribute it and/or modify
	18	* it under the terms of the GNU General Public License version 2 as
	19	* published by the Free Software Foundation.
	20	*/
	21
	22	#include <linux/kernel.h>
	23	#include <linux/init.h>
d052d1be	24	#include <linux/platform_device.h>
1da177e4 LT	25	#include <linux/delay.h>
1da177e4 LT	26	#include <linux/mtd/mtd.h>
9b6553cd	27	#include <linux/mtd/nand.h>
1da177e4	28	#include <linux/mtd/partitions.h>
9b6553cd	29	#include <linux/input.h>
e6da2aa7	30	#include <linux/workqueue.h>
1da177e4 LT	31
	32	#include <asm/hardware.h>
	33	#include <asm/mach-types.h>
	34	#include <asm/mach/arch.h>
	35	#include <asm/mach/flash.h>
	36	#include <asm/mach/map.h>
	37
	38	#include <asm/arch/gpio.h>
7c38cf02	39	#include <asm/arch/mux.h>
1da177e4	40	#include <asm/arch/tc.h>
9b6553cd	41	#include <asm/arch/irda.h>
1da177e4	42	#include <asm/arch/usb.h>
9b6553cd	43	#include <asm/arch/keypad.h>
d48af15e	44	#include <asm/arch/common.h>
9b6553cd TL	45	#include <asm/arch/mcbsp.h>
9b6553cd TL	46	#include <asm/arch/omap-alsa.h>
1da177e4 LT	47
	48	extern int omap_gpio_init(void);
	49
9b6553cd TL	50	static int h2_keymap[] = {
	51	KEY(0, 0, KEY_LEFT),
	52	KEY(0, 1, KEY_RIGHT),
	53	KEY(0, 2, KEY_3),
	54	KEY(0, 3, KEY_F10),
	55	KEY(0, 4, KEY_F5),
	56	KEY(0, 5, KEY_9),
	57	KEY(1, 0, KEY_DOWN),
	58	KEY(1, 1, KEY_UP),
	59	KEY(1, 2, KEY_2),
	60	KEY(1, 3, KEY_F9),
	61	KEY(1, 4, KEY_F7),
	62	KEY(1, 5, KEY_0),
	63	KEY(2, 0, KEY_ENTER),
	64	KEY(2, 1, KEY_6),
	65	KEY(2, 2, KEY_1),
	66	KEY(2, 3, KEY_F2),
	67	KEY(2, 4, KEY_F6),
	68	KEY(2, 5, KEY_HOME),
	69	KEY(3, 0, KEY_8),
	70	KEY(3, 1, KEY_5),
	71	KEY(3, 2, KEY_F12),
	72	KEY(3, 3, KEY_F3),
	73	KEY(3, 4, KEY_F8),
	74	KEY(3, 5, KEY_END),
	75	KEY(4, 0, KEY_7),
	76	KEY(4, 1, KEY_4),
	77	KEY(4, 2, KEY_F11),
	78	KEY(4, 3, KEY_F1),
	79	KEY(4, 4, KEY_F4),
	80	KEY(4, 5, KEY_ESC),
	81	KEY(5, 0, KEY_F13),
	82	KEY(5, 1, KEY_F14),
	83	KEY(5, 2, KEY_F15),
	84	KEY(5, 3, KEY_F16),
	85	KEY(5, 4, KEY_SLEEP),
	86	0
	87	};
	88
	89	static struct mtd_partition h2_nor_partitions[] = {
1da177e4 LT	90	/* bootloader (U-Boot, etc) in first sector */
	91	{
	92	.name = "bootloader",
	93	.offset = 0,
	94	.size = SZ_128K,
	95	.mask_flags = MTD_WRITEABLE, /* force read-only */
	96	},
	97	/* bootloader params in the next sector */
	98	{
	99	.name = "params",
	100	.offset = MTDPART_OFS_APPEND,
	101	.size = SZ_128K,
	102	.mask_flags = 0,
	103	},
	104	/* kernel */
	105	{
	106	.name = "kernel",
	107	.offset = MTDPART_OFS_APPEND,
	108	.size = SZ_2M,
	109	.mask_flags = 0
	110	},
	111	/* file system */
	112	{
	113	.name = "filesystem",
	114	.offset = MTDPART_OFS_APPEND,
	115	.size = MTDPART_SIZ_FULL,
	116	.mask_flags = 0
	117	}
	118	};
	119
9b6553cd	120	static struct flash_platform_data h2_nor_data = {
1da177e4 LT	121	.map_name = "cfi_probe",
1da177e4 LT	122	.width = 2,
9b6553cd TL	123	.parts = h2_nor_partitions,
9b6553cd TL	124	.nr_parts = ARRAY_SIZE(h2_nor_partitions),
1da177e4 LT	125	};
1da177e4 LT	126
9b6553cd	127	static struct resource h2_nor_resource = {
7c38cf02	128	/* This is on CS3, wherever it's mapped */
1da177e4 LT	129	.flags = IORESOURCE_MEM,
	130	};
	131
9b6553cd	132	static struct platform_device h2_nor_device = {
1da177e4 LT	133	.name = "omapflash",
	134	.id = 0,
	135	.dev = {
9b6553cd	136	.platform_data = &h2_nor_data,
1da177e4 LT	137	},
1da177e4 LT	138	.num_resources = 1,
9b6553cd	139	.resource = &h2_nor_resource,
1da177e4 LT	140	};
	141
	142	static struct resource h2_smc91x_resources[] = {
	143	[0] = {
	144	.start = OMAP1610_ETHR_START, /* Physical */
	145	.end = OMAP1610_ETHR_START + 0xf,
	146	.flags = IORESOURCE_MEM,
	147	},
	148	[1] = {
	149	.start = OMAP_GPIO_IRQ(0),
	150	.end = OMAP_GPIO_IRQ(0),
	151	.flags = IORESOURCE_IRQ,
	152	},
	153	};
	154
	155	static struct platform_device h2_smc91x_device = {
	156	.name = "smc91x",
	157	.id = 0,
	158	.num_resources = ARRAY_SIZE(h2_smc91x_resources),
	159	.resource = h2_smc91x_resources,
	160	};
	161
9b6553cd TL	162	static struct resource h2_kp_resources[] = {
	163	[0] = {
	164	.start = INT_KEYBOARD,
	165	.end = INT_KEYBOARD,
	166	.flags = IORESOURCE_IRQ,
	167	},
	168	};
	169
	170	static struct omap_kp_platform_data h2_kp_data = {
4d24607b KS	171	.rows = 8,
	172	.cols = 8,
	173	.keymap = h2_keymap,
	174	.keymapsize = ARRAY_SIZE(h2_keymap),
	175	.rep = 1,
	176	.delay = 9,
	177	.dbounce = 1,
9b6553cd TL	178	};
	179
	180	static struct platform_device h2_kp_device = {
	181	.name = "omap-keypad",
	182	.id = -1,
	183	.dev = {
	184	.platform_data = &h2_kp_data,
	185	},
	186	.num_resources = ARRAY_SIZE(h2_kp_resources),
	187	.resource = h2_kp_resources,
	188	};
	189
	190	#define H2_IRDA_FIRSEL_GPIO_PIN 17
	191
	192	#if defined(CONFIG_OMAP_IR) \|\| defined(CONFIG_OMAP_IR_MODULE)
	193	static int h2_transceiver_mode(struct device *dev, int state)
	194	{
	195	if (state & IR_SIRMODE)
	196	omap_set_gpio_dataout(H2_IRDA_FIRSEL_GPIO_PIN, 0);
	197	else /* MIR/FIR */
	198	omap_set_gpio_dataout(H2_IRDA_FIRSEL_GPIO_PIN, 1);
	199
	200	return 0;
	201	}
	202	#endif
	203
	204	static struct omap_irda_config h2_irda_data = {
	205	.transceiver_cap = IR_SIRMODE \| IR_MIRMODE \| IR_FIRMODE,
	206	.rx_channel = OMAP_DMA_UART3_RX,
	207	.tx_channel = OMAP_DMA_UART3_TX,
	208	.dest_start = UART3_THR,
	209	.src_start = UART3_RHR,
	210	.tx_trigger = 0,
	211	.rx_trigger = 0,
	212	};
	213
	214	static struct resource h2_irda_resources[] = {
	215	[0] = {
	216	.start = INT_UART3,
	217	.end = INT_UART3,
	218	.flags = IORESOURCE_IRQ,
	219	},
	220	};
	221	static struct platform_device h2_irda_device = {
	222	.name = "omapirda",
	223	.id = 0,
	224	.dev = {
	225	.platform_data = &h2_irda_data,
	226	},
	227	.num_resources = ARRAY_SIZE(h2_irda_resources),
	228	.resource = h2_irda_resources,
	229	};
	230
	231	static struct platform_device h2_lcd_device = {
	232	.name = "lcd_h2",
	233	.id = -1,
	234	};
	235
	236	static struct omap_mcbsp_reg_cfg mcbsp_regs = {
	237	.spcr2 = FREE \| FRST \| GRST \| XRST \| XINTM(3),
	238	.spcr1 = RINTM(3) \| RRST,
	239	.rcr2 = RPHASE \| RFRLEN2(OMAP_MCBSP_WORD_8) \|
	240	RWDLEN2(OMAP_MCBSP_WORD_16) \| RDATDLY(1),
	241	.rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) \| RWDLEN1(OMAP_MCBSP_WORD_16),
242	.xcr2 = XPHASE \| XFRLEN2(OMAP_MCBSP_WORD_8) \|
243	XWDLEN2(OMAP_MCBSP_WORD_16) \| XDATDLY(1) \| XFIG,
244	.xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) \| XWDLEN1(OMAP_MCBSP_WORD_16),
245	.srgr1 = FWID(15),
246	.srgr2 = GSYNC \| CLKSP \| FSGM \| FPER(31),
247
248	.pcr0 = CLKXM \| CLKRM \| FSXP \| FSRP \| CLKXP \| CLKRP,
249	//.pcr0 = CLKXP \| CLKRP, /* mcbsp: slave */
250	};
251
252	static struct omap_alsa_codec_config alsa_config = {
253	.name = "H2 TSC2101",
254	.mcbsp_regs_alsa = &mcbsp_regs,
255	.codec_configure_dev = NULL, // tsc2101_configure,
256	.codec_set_samplerate = NULL, // tsc2101_set_samplerate,
257	.codec_clock_setup = NULL, // tsc2101_clock_setup,
258	.codec_clock_on = NULL, // tsc2101_clock_on,
259	.codec_clock_off = NULL, // tsc2101_clock_off,
260	.get_default_samplerate = NULL, // tsc2101_get_default_samplerate,
261	};
262
263	static struct platform_device h2_mcbsp1_device = {
264	.name = "omap_alsa_mcbsp",
265	.id = 1,
266	.dev = {
267	.platform_data = &alsa_config,
268	},
269	};
270
1da177e4	271	static struct platform_device *h2_devices[] __initdata = {
9b6553cd	272	&h2_nor_device,
1da177e4	273	&h2_smc91x_device,
9b6553cd TL	274	&h2_irda_device,
	275	&h2_kp_device,
	276	&h2_lcd_device,
	277	&h2_mcbsp1_device,
1da177e4 LT	278	};
	279
	280	static void __init h2_init_smc91x(void)
	281	{
	282	if ((omap_request_gpio(0)) < 0) {
	283	printk("Error requesting gpio 0 for smc91x irq\n");
	284	return;
	285	}
1da177e4 LT	286	}
1da177e4 LT	287
7c38cf02	288	static void __init h2_init_irq(void)
1da177e4	289	{
87bd63f6	290	omap1_init_common_hw();
1da177e4 LT	291	omap_init_irq();
	292	omap_gpio_init();
	293	h2_init_smc91x();
	294	}
	295
	296	static struct omap_usb_config h2_usb_config __initdata = {
	297	/* usb1 has a Mini-AB port and external isp1301 transceiver */
	298	.otg = 2,
	299
	300	#ifdef CONFIG_USB_GADGET_OMAP
	301	.hmc_mode = 19, // 0:host(off) 1:dev\|otg 2:disabled
	302	// .hmc_mode = 21, // 0:host(off) 1:dev(loopback) 2:host(loopback)
	303	#elif defined(CONFIG_USB_OHCI_HCD) \|\| defined(CONFIG_USB_OHCI_HCD_MODULE)
	304	/* needs OTG cable, or NONSTANDARD (B-to-MiniB) */
	305	.hmc_mode = 20, // 1:dev\|otg(off) 1:host 2:disabled
	306	#endif
	307
	308	.pins[1] = 3,
	309	};
	310
	311	static struct omap_mmc_config h2_mmc_config __initdata = {
7c38cf02 TL	312	.mmc [0] = {
	313	.enabled = 1,
	314	.wire4 = 1,
	315	.wp_pin = OMAP_MPUIO(3),
	316	.power_pin = -1, /* tps65010 gpio3 */
	317	.switch_pin = OMAP_MPUIO(1),
	318	},
1da177e4 LT	319	};
1da177e4 LT	320
3179a019 TL	321	static struct omap_uart_config h2_uart_config __initdata = {
	322	.enabled_uarts = ((1 << 0) \| (1 << 1) \| (1 << 2)),
	323	};
	324
	325	static struct omap_lcd_config h2_lcd_config __initdata = {
3179a019 TL	326	.ctrl_name = "internal",
	327	};
	328
e3318fb4	329	static struct omap_board_config_kernel h2_config[] __initdata = {
1da177e4 LT	330	{ OMAP_TAG_USB, &h2_usb_config },
1da177e4 LT	331	{ OMAP_TAG_MMC, &h2_mmc_config },
3179a019 TL	332	{ OMAP_TAG_UART, &h2_uart_config },
3179a019 TL	333	{ OMAP_TAG_LCD, &h2_lcd_config },
1da177e4 LT	334	};
	335
	336	static void __init h2_init(void)
	337	{
9b6553cd TL	338	/* Here we assume the NOR boot config: NOR on CS3 (possibly swapped
	339	* to address 0 by a dip switch), NAND on CS2B. The NAND driver will
	340	* notice whether a NAND chip is enabled at probe time.
	341	*
	342	* FIXME revC boards (and H3) support NAND-boot, with a dip switch to
	343	* put NOR on CS2B and NAND (which on H2 may be 16bit) on CS3. Try
	344	* detecting that in code here, to avoid probing every possible flash
	345	* configuration...
7c38cf02	346	*/
9b6553cd TL	347	h2_nor_resource.end = h2_nor_resource.start = omap_cs3_phys();
	348	h2_nor_resource.end += SZ_32M - 1;
	349
	350	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
	351	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
7c38cf02 TL	352
	353	/* MMC: card detect and WP */
	354	// omap_cfg_reg(U19_ARMIO1); /* CD */
	355	omap_cfg_reg(BALLOUT_V8_ARMIO3); /* WP */
	356
9b6553cd TL	357	/* Irda */
	358	#if defined(CONFIG_OMAP_IR) \|\| defined(CONFIG_OMAP_IR_MODULE)
	359	omap_writel(omap_readl(FUNC_MUX_CTRL_A) \| 7, FUNC_MUX_CTRL_A);
	360	if (!(omap_request_gpio(H2_IRDA_FIRSEL_GPIO_PIN))) {
	361	omap_set_gpio_direction(H2_IRDA_FIRSEL_GPIO_PIN, 0);
	362	h2_irda_data.transceiver_mode = h2_transceiver_mode;
	363	}
	364	#endif
	365
1da177e4 LT	366	platform_add_devices(h2_devices, ARRAY_SIZE(h2_devices));
	367	omap_board_config = h2_config;
	368	omap_board_config_size = ARRAY_SIZE(h2_config);
3179a019	369	omap_serial_init();
1da177e4 LT	370	}
	371
	372	static void __init h2_map_io(void)
	373	{
87bd63f6	374	omap1_map_common_io();
1da177e4 LT	375	}
	376
	377	MACHINE_START(OMAP_H2, "TI-H2")
e9dea0c6	378	/* Maintainer: Imre Deak <imre.deak@nokia.com> */
e9dea0c6 RK	379	.phys_io = 0xfff00000,
	380	.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
	381	.boot_params = 0x10000100,
	382	.map_io = h2_map_io,
	383	.init_irq = h2_init_irq,
	384	.init_machine = h2_init,
1da177e4 LT	385	.timer = &omap_timer,
1da177e4 LT	386	MACHINE_END